1
|
Yewale MA, Morankar PJ, Kumar V, Teli. AM, Beknalkar SA, Dhas SD, Shin DK. Ni 3V 2O 8 Marigold Structures with rGO Coating for Enhanced Supercapacitor Performance. MICROMACHINES 2024; 15:930. [PMID: 39064441 PMCID: PMC11278805 DOI: 10.3390/mi15070930] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/10/2024] [Revised: 07/12/2024] [Accepted: 07/15/2024] [Indexed: 07/28/2024]
Abstract
In this work, Ni3V2O8 (NVO) and Ni3V2O8-reduced graphene oxide (NVO-rGO) are synthesized hydrothermally, and their extensive structural, morphological, and electrochemical characterizations follow subsequently. The synthetic materials' crystalline structure was confirmed by X-ray diffraction (XRD), and its unique marigold-like morphology was observed by field emission scanning electron microscopy (FESEM). The chemical states of the elements were investigated via X-ray photoelectron spectroscopy (XPS). Electrochemical impedance spectroscopy (EIS), Galvanostatic charge-discharge (GCD), and cyclic voltammetry (CV) were used to assess the electrochemical performance. A specific capacitance of 132 F/g, an energy density of 5.04 Wh/kg, and a power density of 187 W/kg were demonstrated by Ni3V2O8-rGO. Key electrochemical characteristics were b = 0.67; a transfer coefficient of 0.52; a standard rate constant of 6.07 × 10-5 cm/S; a diffusion coefficient of 5.27 × 10-8 cm2/S; and a series resistance of 1.65 Ω. By employing Ni3V2O8-rGO and activated carbon, an asymmetric supercapacitor with a specific capacitance of 7.85 F/g, an energy density of 3.52 Wh/kg, and a power density of 225 W/kg was achieved. The series resistance increased from 4.27 Ω to 6.63 Ω during cyclic stability tests, which showed 99% columbic efficiency and 87% energy retention. The potential of Ni3V2O8-rGO as a high-performance electrode material for supercapacitors is highlighted by these findings.
Collapse
Affiliation(s)
- Manesh A. Yewale
- School of Mechanical Engineering, Yeungnam University, Gyeongsan 38541, Republic of Korea; (M.A.Y.)
| | - Pritam J. Morankar
- School of Chemical Engineering, Yeungnam University, 280 Daehak-ro, Gyeongsan 38541, Republic of Korea
| | - Vineet Kumar
- School of Mechanical Engineering, Yeungnam University, Gyeongsan 38541, Republic of Korea; (M.A.Y.)
| | - Aviraj M. Teli.
- Division of Electronics and Electrical Engineering, Dongguk University—Seoul, 30 Pildong-ro, Jung-gu, Seoul 04620, Republic of Korea
| | - Sonali A. Beknalkar
- Division of Electronics and Electrical Engineering, Dongguk University—Seoul, 30 Pildong-ro, Jung-gu, Seoul 04620, Republic of Korea
| | - Suprimkumar D. Dhas
- Department of Electronic Engineering, Institute for Wearable Convergence Electronics, Kyung Hee University, 1732 Deogyeong-daero, Giheung-gu, Yongin 17104, Republic of Korea
| | - Dong-Kil Shin
- School of Mechanical Engineering, Yeungnam University, Gyeongsan 38541, Republic of Korea; (M.A.Y.)
| |
Collapse
|
2
|
Islam MR, Afroj S, Yin J, Novoselov KS, Chen J, Karim N. Advances in Printed Electronic Textiles. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024; 11:e2304140. [PMID: 38009793 PMCID: PMC10853734 DOI: 10.1002/advs.202304140] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/22/2023] [Revised: 09/11/2023] [Indexed: 11/29/2023]
Abstract
Electronic textiles (e-textiles) have emerged as a revolutionary solution for personalized healthcare, enabling the continuous collection and communication of diverse physiological parameters when seamlessly integrated with the human body. Among various methods employed to create wearable e-textiles, printing offers unparalleled flexibility and comfort, seamlessly integrating wearables into garments. This has spurred growing research interest in printed e-textiles, due to their vast design versatility, material options, fabrication techniques, and wide-ranging applications. Here, a comprehensive overview of the crucial considerations in fabricating printed e-textiles is provided, encompassing the selection of conductive materials and substrates, as well as the essential pre- and post-treatments involved. Furthermore, the diverse printing techniques and the specific requirements are discussed, highlighting the advantages and limitations of each method. Additionally, the multitude of wearable applications made possible by printed e-textiles is explored, such as their integration as various sensors, supercapacitors, and heated garments. Finally, a forward-looking perspective is provided, discussing future prospects and emerging trends in the realm of printed wearable e-textiles. As advancements in materials science, printing technologies, and design innovation continue to unfold, the transformative potential of printed e-textiles in healthcare and beyond is poised to revolutionize the way wearable technology interacts and benefits.
Collapse
Affiliation(s)
- Md Rashedul Islam
- Centre for Print Research (CFPR)University of the West of EnglandFrenchay CampusBristolBS16 1QYUK
| | - Shaila Afroj
- Centre for Print Research (CFPR)University of the West of EnglandFrenchay CampusBristolBS16 1QYUK
| | - Junyi Yin
- Department of BioengineeringUniversity of CaliforniaLos AngelesCA90095USA
| | - Kostya S. Novoselov
- Institute for Functional Intelligent MaterialsDepartment of Materials Science and EngineeringNational University of SingaporeSingapore117575Singapore
| | - Jun Chen
- Department of BioengineeringUniversity of CaliforniaLos AngelesCA90095USA
| | - Nazmul Karim
- Centre for Print Research (CFPR)University of the West of EnglandFrenchay CampusBristolBS16 1QYUK
- Nottingham School of Art and DesignNottingham Trent UniversityShakespeare StreetNottinghamNG1 4GGUK
| |
Collapse
|
3
|
Hayat M, Zhou Y, Ullah Shah MZ, Sana Ullah M, Hanif MB, Hou H, Arif U, Khan S, Hassan AM, Tighezza AM, Sajjad M, Vadla R. Exploring the electrochemical properties of CuSe-decorated NiSe 2 nanocubes for battery-supercapacitor hybrid devices. CHEMOSPHERE 2023; 340:139720. [PMID: 37567270 DOI: 10.1016/j.chemosphere.2023.139720] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/17/2023] [Revised: 07/19/2023] [Accepted: 08/01/2023] [Indexed: 08/13/2023]
Abstract
Chalcogenides, a promising class of electrode materials, attracted massive popularity owing to their exciting features of high conductive nature, high capacity, rich redox activities, and structural functionalities, making them the first choice for the electrochemical energy domain. This paper reported a new NiSe2-CuSe nanocomposite prepared via a wet-chemical synthesis followed by a low-cost and simple hydrothermal reaction. The physical characterization showed cubes and nanoparticles type morphological features of NiSe2 and CuSe products, while their composite reveals a combined morphological characteristic. The electrochemical properties were tested in an aqueous solution, demonstrating that the NiSe2-CuSe nanocomposite exhibits a high capacity of 376 C g-1, low resistance, good reversibility and rate capability in a three-electrode mode than bulk counterparts. For practical aspects, a battery-hybrid supercapacitor (BHSC) is developed with NiSe2-CuSe nanocomposite, and activated carbon (AC) serves as cathode and anode in two-cell mode operation. The built NiSe2-CuSe||AC/KOH BHSC expanded the voltage to 1.8 V and delivered the highest capacitance of 148 F g-1 and 55 F g-1 from 1 to 10 A g-1, suppressing most of the previously existing literature reports. Also, our built NiSe2-CuSe||AC/KOH BHSC displayed a high-power delivery of 8928 W kg-1 at a maximum energy density of 66.6 W h kg-1 and retained 91.7% capacitance after a long way of 10,000 cycles. These outstanding results demonstrate that metal selenides can be effectively utilized as alternative electrodes with high energy, rate performance, and long-term durability for advanced energy conversion and storage devices.
Collapse
Affiliation(s)
- Mudassir Hayat
- College of Physical Science and Technology, Institute of Optoelectronics Technology, Yangzhou University, Yangzhou, 225002, China
| | - Yuxue Zhou
- College of Physical Science and Technology, Institute of Optoelectronics Technology, Yangzhou University, Yangzhou, 225002, China.
| | - Muhammad Zia Ullah Shah
- Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming, 650093, China
| | - Muhammad Sana Ullah
- Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming, 650093, China
| | - Muhammad Bilal Hanif
- Department of Inorganic Chemistry, Faculty of Natural Sciences, Comenius University Bratislava, 842 15, Bratislava, Slovakia
| | - Hongying Hou
- Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming, 650093, China
| | - Umar Arif
- Department of Chemistry, Zhejiang University, Hangzhou 310027, P.R. China
| | - Shaukat Khan
- Department of Chemical Engineering, College of Engineering, Dhofar University, Salalah, 211, Sultanate of Oman
| | - Ahmed M Hassan
- Faculty of Engineering and Technology, Future University in Egypt, New Cairo, 11835, Egypt
| | - Ammar M Tighezza
- Department of Chemistry, P. O. Box 2455, College of Science, King Saud University, Riyadh, 11451, Saudi Arabia
| | - Muhammad Sajjad
- College of Chemistry and Materials Science, Zhejiang Normal University, Jinhua, 321004, PR China.
| | - Raghavender Vadla
- Department of Aeronautical Engineering, Institute of Aeronautical Engineering, Hyderabad, India.
| |
Collapse
|
4
|
Metal-glycerolates and their derivatives as electrode materials: A review on recent developments, challenges, and future perspectives. Coord Chem Rev 2023. [DOI: 10.1016/j.ccr.2022.214954] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
|
5
|
Lee KS, Mugobera S, Park CW, Ko JM. Electrochemical properties depending on heteroatom and surface property of various carbon sources/
NiO
composites as supercapacitor electrode. J CHIN CHEM SOC-TAIP 2022. [DOI: 10.1002/jccs.202200380] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Affiliation(s)
- Kwang Se Lee
- Department of Advanced Materials and Chemical Engineering Kyungnam College of Information & Technology Busan South Korea
| | - Sharon Mugobera
- Department of Chemical and Biological Engineering Hanbat National University Daejeon South Korea
| | - Chan Woo Park
- Decontamination and Decommissioning Technology Research Division Korea Atomic Energy Research Institute Daejeon South Korea
| | - Jang Myoun Ko
- Department of Chemical and Biological Engineering Hanbat National University Daejeon South Korea
| |
Collapse
|
6
|
Islam MR, Afroj S, Novoselov KS, Karim N. Smart Electronic Textile-Based Wearable Supercapacitors. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2022; 9:e2203856. [PMID: 36192164 PMCID: PMC9631069 DOI: 10.1002/advs.202203856] [Citation(s) in RCA: 25] [Impact Index Per Article: 12.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/05/2022] [Revised: 09/05/2022] [Indexed: 05/05/2023]
Abstract
Electronic textiles (e-textiles) have drawn significant attention from the scientific and engineering community as lightweight and comfortable next-generation wearable devices due to their ability to interface with the human body, and continuously monitor, collect, and communicate various physiological parameters. However, one of the major challenges for the commercialization and further growth of e-textiles is the lack of compatible power supply units. Thin and flexible supercapacitors (SCs), among various energy storage systems, are gaining consideration due to their salient features including excellent lifetime, lightweight, and high-power density. Textile-based SCs are thus an exciting energy storage solution to power smart gadgets integrated into clothing. Here, materials, fabrications, and characterization strategies for textile-based SCs are reviewed. The recent progress of textile-based SCs is then summarized in terms of their electrochemical performances, followed by the discussion on key parameters for their wearable electronics applications, including washability, flexibility, and scalability. Finally, the perspectives on their research and technological prospects to facilitate an essential step towards moving from laboratory-based flexible and wearable SCs to industrial-scale mass production are presented.
Collapse
Affiliation(s)
- Md Rashedul Islam
- Centre for Print Research (CFPR)The University of the West of EnglandFrenchay CampusBristolBS16 1QYUK
| | - Shaila Afroj
- Centre for Print Research (CFPR)The University of the West of EnglandFrenchay CampusBristolBS16 1QYUK
| | - Kostya S. Novoselov
- Institute for Functional Intelligent Materials, Department of Materials Science and EngineeringNational University of SingaporeSingapore117575Singapore
- Chongqing 2D Materials InstituteLiangjiang New AreaChongqing400714China
| | - Nazmul Karim
- Centre for Print Research (CFPR)The University of the West of EnglandFrenchay CampusBristolBS16 1QYUK
| |
Collapse
|
7
|
Ramkumar R, Dhakal G, Shim JJ, Kim WK. NiO/Ni Nanowafer Aerogel Electrodes for High Performance Supercapacitors. NANOMATERIALS (BASEL, SWITZERLAND) 2022; 12:3813. [PMID: 36364589 PMCID: PMC9655204 DOI: 10.3390/nano12213813] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/01/2022] [Revised: 10/22/2022] [Accepted: 10/25/2022] [Indexed: 06/16/2023]
Abstract
Transition metal oxide aerogels are a fascinating class of compounds that have received considerable attention in the last decade owing to their unique and exceptional properties, including high porosity, large surface area, and ultralow density. In this study, α-Ni(OH)2 aerogels and annealed NiO/Ni aerogels were used to design and fabricate a two-electrode supercapacitor device. The physicochemical properties of the as-synthesized aerogels were characterized through X-ray diffraction, scanning electron microscopy, transmission electron microscopy, the Brunauer-Emmett-Teller theory, and X-ray photoelectron spectroscopy studies. The annealed NiO/Ni aerogels showed a (specific capacitance of 1060 F/g) specific capacity of 422 C/g at 1 A/g current density and with good cycling stability (up to 10,000 cycles). The supercapacitor also demonstrated an energy density of 32.4 Wh/kg and power density of 1800 W/kg at a current density of 2 A/g. The specific capacitance of NiO/Ni aerogels was more than twice that of the α-Ni(OH)2 aerogels. The practical applications of the aerogel were demonstrated by fabricating a two-electrode device.
Collapse
|
8
|
Pan Y, Tian L, Wang W, Zhao J, Li Y, Xi N, Jian L, Han S, Zhang L. Ameliorating discharge capability of Co-free flower-like spherical α-Ni(OH)2 by NiS coating. Electrochim Acta 2022. [DOI: 10.1016/j.electacta.2022.141074] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
|
9
|
Kang J, Xue Y, Yang J, Hu Q, Zhang Q, Gu L, Selloni A, Liu LM, Guo L. Realizing Two-Electron Transfer in Ni(OH) 2 Nanosheets for Energy Storage. J Am Chem Soc 2022; 144:8969-8976. [PMID: 35500303 DOI: 10.1021/jacs.1c13523] [Citation(s) in RCA: 35] [Impact Index Per Article: 17.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
The theoretical capacity of a given electrode material is ultimately determined by the number of electrons transferred in each redox center. The design of multi-electron transfer processes could break through the limitation of one-electron transfer and multiply the total capacity but is difficult to achieve because multiple electron transfer processes are generally thermodynamically and kinetically more complex. Here, we report the discovery of two-electron transfer in monolayer Ni(OH)2 nanosheets, which contrasts with the traditional one-electron transfer found in multilayer materials. First-principles calculations predict that the first oxidation process Ni2+ → Ni3+ occurs easily, whereas the second electron transfer in Ni3+ → Ni4+ is strongly hindered in multilayer materials by both the interlayer hydrogen bonds and the domain H structure induced by the Jahn-Teller distortion of the Ni3+ (t2g6eg1)-centered octahedra. In contrast, the second electron transfer can easily occur in monolayers because all H atoms are fully exposed. Experimentally, the as-prepared monolayer is found to deliver an exceptional redox capacity of ∼576 mA h/g, nearly 2 times the theoretical capacity of one-electron processes. In situ experiments demonstrate that monolayer Ni(OH)2 can transfer two electrons and most Ni ions transform into Ni4+ during the charging process, whereas bulk Ni(OH)2 can only be transformed partially. Our work reveals a new redox reaction mechanism in atomically thin Ni(OH)2 nanosheets and suggests a promising path toward tuning the electron transfer numbers to multiply the capacity of the relevant energy storage materials.
Collapse
Affiliation(s)
- Jianxin Kang
- School of Chemistry, Beijing Advanced Innovation Center for Biomedical Engineering, Key Laboratory of Bio-Inspired Smart Interfacial Science and Technology, Beihang University, Beijing 100191, China
| | - Yufeng Xue
- School of Physics, Beihang University, Beijing 100191, China
| | - Jie Yang
- School of Chemistry, Beijing Advanced Innovation Center for Biomedical Engineering, Key Laboratory of Bio-Inspired Smart Interfacial Science and Technology, Beihang University, Beijing 100191, China
| | - Qi Hu
- Beijing Computational Science Research Center, Beijing 100193, China
| | - Qinghua Zhang
- Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China
| | - Lin Gu
- Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China
| | - Annabella Selloni
- Department of Chemistry, Princeton University, Princeton, New Jersey 08544, United States
| | - Li-Min Liu
- School of Physics, Beihang University, Beijing 100191, China
| | - Lin Guo
- School of Chemistry, Beijing Advanced Innovation Center for Biomedical Engineering, Key Laboratory of Bio-Inspired Smart Interfacial Science and Technology, Beihang University, Beijing 100191, China
| |
Collapse
|
10
|
Shah SS, Aziz MA, Yamani ZH. Recent Progress in Carbonaceous and Redox‐active Nanoarchitectures for Hybrid Supercapacitors: Performance Evaluation, Challenges, and Future Prospects. CHEM REC 2022; 22:e202200018. [DOI: 10.1002/tcr.202200018] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/25/2022] [Revised: 03/10/2022] [Accepted: 04/02/2022] [Indexed: 11/08/2022]
Affiliation(s)
- Syed Shaheen Shah
- Physics Department King Fahd University of Petroleum & Minerals, KFUPM Box 5047 Dhahran 31261 Saudi Arabia
- Interdisciplinary Research Center for Hydrogen and Energy Storage (IRC-HES) King Fahd University of Petroleum & Minerals, KFUPM Box 5040 Dhahran 31261 Saudi Arabia
| | - Md. Abdul Aziz
- Interdisciplinary Research Center for Hydrogen and Energy Storage (IRC-HES) King Fahd University of Petroleum & Minerals, KFUPM Box 5040 Dhahran 31261 Saudi Arabia
- K.A.CARE Energy Research & Innovation Center King Fahd University of Petroleum & Minerals Dhahran 31261 Saudi Arabia
| | - Zain H. Yamani
- Physics Department King Fahd University of Petroleum & Minerals, KFUPM Box 5047 Dhahran 31261 Saudi Arabia
- Interdisciplinary Research Center for Hydrogen and Energy Storage (IRC-HES) King Fahd University of Petroleum & Minerals, KFUPM Box 5040 Dhahran 31261 Saudi Arabia
| |
Collapse
|
11
|
Zhang Q, Chen X, Cheng S, Li R, E Y, Jiang M. Synthesis of VS2/NiS nanocomposites by in situ growing NiS clusters on VS2 ultrathin nanoplates for high performance supercapacitors. ChemElectroChem 2022. [DOI: 10.1002/celc.202200073] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Affiliation(s)
- Qi Zhang
- East China University of Science and Technology School of Materials Science and Engineering 200030 CHINA
| | - Xin Chen
- East China University of Science and Technology 130 Meilong Road Shanghai CHINA
| | - Siyu Cheng
- East China University of Science and Technology School of Materials Science and Engineering CHINA
| | - Runfa Li
- East China University of Science and Technology School of Materials Science and Engineering CHINA
| | - Yi E
- East China University of Science and Technology School of Materials Science and Engineering School of Materials Science and Engineering CHINA
| | - Meng Jiang
- East China University of Science and Technology school of materials science and engineering CHINA
| |
Collapse
|
12
|
Facile Synthesis of NiCo2S4/rGO Composites in a Micro-Impinging Stream Reactor for Energy Storage. APPLIED SCIENCES-BASEL 2022. [DOI: 10.3390/app12062882] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/01/2023]
Abstract
Using a process-enhanced micro-impinging stream reactor (MISR) and a co-precipitation route, NiCo2S4 and NiCo2S4/rGO electrode materials were successfully prepared, respectively. Owing to its excellent micromixing performance, the MISR-prepared NiCo2S4/rGO composites had a smaller size and less agglomeration than the same composites prepared in a traditional stirred reactor (STR). The specific capacity of the MISR-prepared composites was as high as 198.0 mAh g−1 under the current density of 1 A g−1. The cycling stability of the composites also improved significantly after being modified with reduced graphene oxide (rGO), and they displayed a fine cycling stability, which maintained a retention rate of 83.6% after 1000 cycles of charging and discharging.
Collapse
|
13
|
Nunes WG, Pascon AM, Freitas B, De Sousa LG, Franco DV, Zanin H, Da Silva LM. Electrochemical Behavior of Symmetric Electrical Double-Layer Capacitors and Pseudocapacitors and Identification of Transport Anomalies in the Interconnected Ionic and Electronic Phases Using the Impedance Technique. NANOMATERIALS (BASEL, SWITZERLAND) 2022; 12:676. [PMID: 35215004 PMCID: PMC8876237 DOI: 10.3390/nano12040676] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/19/2022] [Revised: 02/04/2022] [Accepted: 02/14/2022] [Indexed: 02/04/2023]
Abstract
A double-channel transmission line impedance model was applied to the study of supercapacitors to investigate the charge transport characteristics in the ionic and electronic conductors forming the electrode/solution interface. The macro homogeneous description of two closely mixed phases (Paasch-Micka-Gersdorf model) was applied to study the influence of disordered materials on the charge transport anomalies during the interfacial charge-discharge process. Different ex situ techniques were used to characterize the electrode materials used in electrical double-layer (EDLC) and pseudocapacitor (PC) devices. Two time constants in the impedance model were adequate to represent the charge transport in the different phases. The interfacial impedance considering frequency dispersion and blocked charge transfer conditions adequately described the charge storage at the interface. Deviations from the normal (Fickian) transport involving the ionic and electronic charge carriers were identified by the dispersive parameters (e.g., n and s exponents) used in the impedance model. The ionic and electronic transports were affected when the carbon-based electrical double-layer capacitor was converted into a composite with strong pseudocapacitive characteristics after the decoration process using NiO. The overall capacitance increased from 2.62 F g-1 to 536 F g-1 after the decoration. For the first time, the charge transport anomalies were unequivocally identified in porous materials used in supercapacitors with the impedance technique.
Collapse
Affiliation(s)
- Willian G. Nunes
- Carbon Sci-Tech Labs, Center for Innovation on New Energies, Advanced Energy Storage Division, School of Electrical and Computer Engineering, University of Campinas, Av. Albert Einstein 400, Campinas 13083-852, SP, Brazil; (W.G.N.); (A.M.P.); (B.F.)
| | - Aline M. Pascon
- Carbon Sci-Tech Labs, Center for Innovation on New Energies, Advanced Energy Storage Division, School of Electrical and Computer Engineering, University of Campinas, Av. Albert Einstein 400, Campinas 13083-852, SP, Brazil; (W.G.N.); (A.M.P.); (B.F.)
| | - Bruno Freitas
- Carbon Sci-Tech Labs, Center for Innovation on New Energies, Advanced Energy Storage Division, School of Electrical and Computer Engineering, University of Campinas, Av. Albert Einstein 400, Campinas 13083-852, SP, Brazil; (W.G.N.); (A.M.P.); (B.F.)
| | - Lindomar G. De Sousa
- Laboratory of Fundamental and Applied Electrochemistry, Department of Chemistry, Federal University of Jequitinhonha e Mucuri’s Valley, Rodovia MGT 367, Km 583, n° 5000, Alto da Jacuba, Diamantina 39100-000, MG, Brazil; (L.G.D.S.); (D.V.F.)
| | - Débora V. Franco
- Laboratory of Fundamental and Applied Electrochemistry, Department of Chemistry, Federal University of Jequitinhonha e Mucuri’s Valley, Rodovia MGT 367, Km 583, n° 5000, Alto da Jacuba, Diamantina 39100-000, MG, Brazil; (L.G.D.S.); (D.V.F.)
| | - Hudson Zanin
- Carbon Sci-Tech Labs, Center for Innovation on New Energies, Advanced Energy Storage Division, School of Electrical and Computer Engineering, University of Campinas, Av. Albert Einstein 400, Campinas 13083-852, SP, Brazil; (W.G.N.); (A.M.P.); (B.F.)
| | - Leonardo M. Da Silva
- Laboratory of Fundamental and Applied Electrochemistry, Department of Chemistry, Federal University of Jequitinhonha e Mucuri’s Valley, Rodovia MGT 367, Km 583, n° 5000, Alto da Jacuba, Diamantina 39100-000, MG, Brazil; (L.G.D.S.); (D.V.F.)
| |
Collapse
|
14
|
Controllable synthesis of hierarchical nanoporous carbon@Ni(OH)2 rambutan-like composite microspheres for high-performance hybrid supercapacitor. ARAB J CHEM 2022. [DOI: 10.1016/j.arabjc.2021.103580] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/11/2023] Open
|
15
|
Shaikh NS, Kanjanaboos P, Lokhande VC, Praserthdam S, Lokhande CD, Shaikh JS. Engineering of Battery Type Electrodes for High Performance Lithium Ion Hybrid Supercapacitors. ChemElectroChem 2021. [DOI: 10.1002/celc.202100781] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/08/2023]
Affiliation(s)
- Navajsharif S. Shaikh
- School of Materials Science and Innovation Faculty of Science Mahidol University Bangkok Thailand
| | - Pongsakorn Kanjanaboos
- School of Materials Science and Innovation Faculty of Science Mahidol University Bangkok Thailand
| | - V. C. Lokhande
- Department of Electronics Communication and Computer Engineering Chonnam National University Gwangju 500 757 South Korea
| | - Supareak Praserthdam
- Department of Chemical Engineering Faculty of Engineering Chulalongkorn University Bangkok Thailand
- High-performance Computing Unit (CECC-HCU) Center of Excellence on Catalysis and Catalytic Reaction Engineering (CECC) Chulalongkorn University Bangkok 10330 Thailand
| | - Chandrakant D. Lokhande
- Centre of Interdisciplinary Research D. Y. Patil University Kolhapur 416006 Maharashtra India
| | - Jasmin S. Shaikh
- Department of Chemical Engineering Faculty of Engineering Chulalongkorn University Bangkok Thailand
- High-performance Computing Unit (CECC-HCU) Center of Excellence on Catalysis and Catalytic Reaction Engineering (CECC) Chulalongkorn University Bangkok 10330 Thailand
| |
Collapse
|
16
|
Zhou J, Wang Y, Zhou J, Chen K, Han L. Well-defined hollow tube@sheets NiCo 2S 4 core-shell nanoarrays for ultrahigh capacitance supercapacitor. Dalton Trans 2021; 50:15129-15139. [PMID: 34612303 DOI: 10.1039/d1dt02666f] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/20/2023]
Abstract
Reasonable design of electrodes with well-defined nanostructure is the central aspect in the practical application of high-performance supercapacitors. Herein, hollow tube@sheets NiCo2S4 core-shell nanoarrays are rationally constructed to the free-standing electrode by in situ growing ZIF-67 on Co-precursor nanorods array and sequentially performing anion-exchange (S2-) and cation-exchange (Ni2+). The well-defined nanostructures can shorten the ion transport path in the charging-discharging process, increase the specific surface area and electrochemical active cites, which help in improving electrochemical performance. Therefore, the unique tube@sheets NiCo2S4 core-shell nanoarrays exhibit intriguing electrochemical performance and show excellent areal capacitance of 11.3 F cm-2 (3227.94 F g-1) at a current density of 2 mA cm-2 (2 A g-1). The assembled asymmetric supercapacitor device delivers a high energy density of 0.42 mW h cm-2 at a power density of 2.1 mW cm-2 and displays outstanding cyclic stability (90.2% retention after 5000 cycles). Consequently, the well-defined nanostructure engineering strategy is beneficial for designing active electrode materials for efficient energy storage devices.
Collapse
Affiliation(s)
- Jiachao Zhou
- State Key Laboratory Base of Novel Functional Materials and Preparation Science, School of Materials Science and Chemical Engineering, Ningbo University, Ningbo, Zhejiang 315211, China.
| | - Yingchao Wang
- State Key Laboratory Base of Novel Functional Materials and Preparation Science, School of Materials Science and Chemical Engineering, Ningbo University, Ningbo, Zhejiang 315211, China.
| | - Jiaojiao Zhou
- State Key Laboratory Base of Novel Functional Materials and Preparation Science, School of Materials Science and Chemical Engineering, Ningbo University, Ningbo, Zhejiang 315211, China.
| | - Kang Chen
- State Key Laboratory Base of Novel Functional Materials and Preparation Science, School of Materials Science and Chemical Engineering, Ningbo University, Ningbo, Zhejiang 315211, China.
| | - Lei Han
- State Key Laboratory Base of Novel Functional Materials and Preparation Science, School of Materials Science and Chemical Engineering, Ningbo University, Ningbo, Zhejiang 315211, China.
| |
Collapse
|
17
|
Urso M, Iffelsberger C, Mayorga-Martinez CC, Pumera M. Nickel Sulfide Microrockets as Self-Propelled Energy Storage Devices to Power Electronic Circuits "On-Demand". SMALL METHODS 2021; 5:e2100511. [PMID: 34927946 DOI: 10.1002/smtd.202100511] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/12/2021] [Revised: 08/02/2021] [Indexed: 06/14/2023]
Abstract
Miniaturized energy storage devices are essential to power the growing number and variety of microelectronic technologies. Here, a concept of self-propelled microscale energy storage elements that can move, reach, and power electronic circuits is reported. Microrockets consisting of a nickel sulfide (NiS) outer layer and a Pt inner layer are prepared by template-assisted electrodeposition, and designed to store energy through NiS-mediated redox reactions and propel via the Pt-catalyzed decomposition of H2 O2 fuel. Scanning electrochemical microscopy allows visualizing and studying the energy storage ability of a single microrocket, revealing its pseudocapacitive nature. This proves the great potential of such technique in the field of micro/nanomotors. On-demand delivery of energy storage units to electronic circuits has been demonstrated by releasing microrockets on an interdigitated array electrode as an example of electronic circuit. Owing to their self-propulsion ability, they reach the active area of the electrode and, in principle, power its functions. These autonomously moving energy storage devices will be employed for next-generation electronics to store and deliver energy in previously inaccessible locations.
Collapse
Affiliation(s)
- Mario Urso
- Future Energy and Innovation Laboratory, Central European Institute of Technology, Brno University of Technology, Brno, 61200, Czech Republic
| | - Christian Iffelsberger
- Future Energy and Innovation Laboratory, Central European Institute of Technology, Brno University of Technology, Brno, 61200, Czech Republic
| | - Carmen C Mayorga-Martinez
- Center for Advanced Functional Nanorobots, Department of Inorganic Chemistry, Faculty of Chemical Technology, University of Chemistry and Technology Prague, Prague, 166 28, Czech Republic
| | - Martin Pumera
- Future Energy and Innovation Laboratory, Central European Institute of Technology, Brno University of Technology, Brno, 61200, Czech Republic
- Center for Advanced Functional Nanorobots, Department of Inorganic Chemistry, Faculty of Chemical Technology, University of Chemistry and Technology Prague, Prague, 166 28, Czech Republic
- Center for Nanorobotics and Machine Intelligence, Department of Chemistry and Biochemistry, Mendel University in Brno, Brno, CZ-613 00, Czech Republic
- Department of Medical Research, China Medical University Hospital, China Medical University, Taichung, 40402, Taiwan
- Department of Chemical and Biomolecular Engineering, Yonsei University, Seodaemun-Gu, Seoul, 03722, South Korea
| |
Collapse
|
18
|
He L, Wang Y, Guo Y, Li G, Zhang X, Cai W. Core-shell NiSe/Ni(OH) 2with NiSe nanorods and Ni(OH) 2nanosheets as battery-type electrode for hybrid supercapacitors. NANOTECHNOLOGY 2021; 32:345706. [PMID: 34010828 DOI: 10.1088/1361-6528/ac02ea] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/18/2021] [Accepted: 05/19/2021] [Indexed: 06/12/2023]
Abstract
Novel core-shell nanostructure electrodes benefit from the excellent properties of their constituent materials, as well as the synergy between them. However, it is challenging to fabricate such structures efficiently. In this study, NiSe nanorods were fabricated using Ni foam as the conductive substrate and reactant via a one-step hydrothermal process, and Ni(OH)2nanosheets were coated on the surface of the nanorods via one-step electrodeposition. The effect of the structure and morphology on the properties of the material was explored using scanning electron microscopy, x-ray diffraction, and electrochemical technology. The obtained core-shell NiSe/Ni(OH)2exhibited an areal capacity of 1.89 mAh cm-2at a current density of 5 mA cm-2. The assembled NiSe/Ni(OH)2//AC hybrid supercapacitor exhibited excellent energy and power densities, indicating that NiSe/Ni(OH)2has great potential for use as a battery-type electrode in energy storage systems.
Collapse
Affiliation(s)
- Leqiu He
- School of Chemical Engineering and Technology, Tianjin University, Tianjin 300350, People's Republic of China
| | - Yan Wang
- School of Chemical Engineering and Technology, Tianjin University, Tianjin 300350, People's Republic of China
| | - Yajie Guo
- School of Chemical Engineering and Technology, Tianjin University, Tianjin 300350, People's Republic of China
| | - Guobing Li
- School of Chemical Engineering and Technology, Tianjin University, Tianjin 300350, People's Republic of China
| | - Xubin Zhang
- School of Chemical Engineering and Technology, Tianjin University, Tianjin 300350, People's Republic of China
| | - Wangfeng Cai
- School of Chemical Engineering and Technology, Tianjin University, Tianjin 300350, People's Republic of China
| |
Collapse
|
19
|
Electrode Design for MnO 2-Based Aqueous Electrochemical Capacitors: Influence of Porosity and Mass Loading. MATERIALS 2021; 14:ma14112990. [PMID: 34205882 PMCID: PMC8197865 DOI: 10.3390/ma14112990] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/10/2021] [Revised: 05/26/2021] [Accepted: 05/27/2021] [Indexed: 11/17/2022]
Abstract
The purpose of this study is to highlight the influence of some fabrication parameters, such as mass loading and porosity, which are not really elucidated and standardized during the realization of electrodes for supercapacitors, especially when using metal oxides as electrode materials. Electrode calendering, as one stage during the fabrication of electrodes, was carried out step-by-step on manganese dioxide electrodes to study the decreasing porosity effect on the electrochemical performance of a MnO2 symmetric device. One other crucial parameter, the mass loading, which has to be understood and well used for realistic supercapacitors, was investigated concurrently. Gravimetric, areal and volumetric capacitances are highlighted, varying the porosity for low-, medium- and large-mass loading. Low-loading leads to the best specific capacitances but is not credible for realistic supercapacitors, except for microdevices. Down 50% porosities after calendering, capacitances are increased and become stable faster, suggesting a faster wettability of the dense electrodes by the electrolyte, especially for high-mass loading. EIS experiments performed on electrodes without and with calendering lead to a significant decrease of the device’s time response, especially at high loading. A high-mass loading device seems to work as a power battery, whereas electrode calendaring, which allows decreasing the time response, leads to an electrical behavior closer to that expected for a supercapacitor.
Collapse
|
20
|
Santhosh N, Upadhyay KK, Stražar P, Filipič G, Zavašnik J, Mão de Ferro A, Silva RP, Tatarova E, Montemor MDF, Cvelbar U. Advanced Carbon-Nickel Sulfide Hybrid Nanostructures: Extending the Limits of Battery-Type Electrodes for Redox-Based Supercapacitor Applications. ACS APPLIED MATERIALS & INTERFACES 2021; 13:20559-20572. [PMID: 33881814 PMCID: PMC8289178 DOI: 10.1021/acsami.1c03053] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 02/15/2021] [Accepted: 04/09/2021] [Indexed: 06/12/2023]
Abstract
Transition-metal sulfides combined with conductive carbon nanostructures are considered promising electrode materials for redox-based supercapacitors due to their high specific capacity. However, the low rate capability of these electrodes, still considered "battery-type" electrodes, presents an obstacle for general use. In this work, we demonstrate a successful and fast fabrication process of metal sulfide-carbon nanostructures ideal for charge-storage electrodes with ultra-high capacity and outstanding rate capability. The novel hybrid binder-free electrode material consists of a vertically aligned carbon nanotube (VCN), terminated by a nanosized single-crystal metallic Ni grain; Ni is covered by a nickel nitride (Ni3N) interlayer and topped by trinickel disulfide (Ni3S2, heazlewoodite). Thus, the electrode is formed by a Ni3S2/Ni3N/Ni@NVCN architecture with a unique broccoli-like morphology. Electrochemical measurements show that these hybrid binder-free electrodes exhibit one of the best electrochemical performances compared to the other reported Ni3S2-based electrodes, evidencing an ultra-high specific capacity (856.3 C g-1 at 3 A g-1), outstanding rate capability (77.2% retention at 13 A g-1), and excellent cycling stability (83% retention after 4000 cycles at 13 A g-1). The remarkable electrochemical performance of the binder-free Ni3S2/Ni3N/Ni@NVCN electrodes is a significant step forward, improving rate capability and capacity for redox-based supercapacitor applications.
Collapse
Affiliation(s)
- Neelakandan
M. Santhosh
- Department
of Gaseous Electronics, Jožef Stefan
Institute, Jamova Cesta
39, Ljubljana SI-1000, Slovenia
- Jožef
Stefan International Postgraduate School, Jamova Cesta 39, Ljubljana SI-1000, Slovenia
| | - Kush K. Upadhyay
- Charge2C-NewCap, Av. José Francisco Guerreiro,
No 28 Paiã Park, Armazém A2.12, Pontinha, Odivelas 1675-078, Portugal
- Centro
de Química Estrutural-CQE, Departamento de Engenharia Química,
Instituto Superior Técnico, Universidade
de Lisboa, Lisboa 1049-001, Portugal
| | - Petra Stražar
- Department
of Gaseous Electronics, Jožef Stefan
Institute, Jamova Cesta
39, Ljubljana SI-1000, Slovenia
- Jožef
Stefan International Postgraduate School, Jamova Cesta 39, Ljubljana SI-1000, Slovenia
| | - Gregor Filipič
- Department
of Gaseous Electronics, Jožef Stefan
Institute, Jamova Cesta
39, Ljubljana SI-1000, Slovenia
| | - Janez Zavašnik
- Department
of Gaseous Electronics, Jožef Stefan
Institute, Jamova Cesta
39, Ljubljana SI-1000, Slovenia
| | - André Mão de Ferro
- Charge2C-NewCap, Av. José Francisco Guerreiro,
No 28 Paiã Park, Armazém A2.12, Pontinha, Odivelas 1675-078, Portugal
| | - Rui Pedro Silva
- Charge2C-NewCap, Av. José Francisco Guerreiro,
No 28 Paiã Park, Armazém A2.12, Pontinha, Odivelas 1675-078, Portugal
| | - Elena Tatarova
- Instituto
de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Lisboa 1049, Portugal
| | - Maria de Fátima Montemor
- Centro
de Química Estrutural-CQE, Departamento de Engenharia Química,
Instituto Superior Técnico, Universidade
de Lisboa, Lisboa 1049-001, Portugal
| | - Uroš Cvelbar
- Department
of Gaseous Electronics, Jožef Stefan
Institute, Jamova Cesta
39, Ljubljana SI-1000, Slovenia
- Jožef
Stefan International Postgraduate School, Jamova Cesta 39, Ljubljana SI-1000, Slovenia
| |
Collapse
|
21
|
Self-Supported Sheets-on-Wire CuO@Ni(OH)2/Zn(OH)2 Nanoarrays for High-Performance Flexible Quasi-Solid-State Supercapacitor. Processes (Basel) 2021. [DOI: 10.3390/pr9040680] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/25/2022] Open
Abstract
Transition metal hydroxides have attracted a lot of attention as the electrode materials for supercapacitors owing to their relatively high theoretical capacity, low cost, and facile preparation methods. However, their low intrinsic conductivity deteriorates their high-rate performance and cycling stability. Here, self-supported sheets-on-wire CuO@Ni(OH)2/Zn(OH)2 (CuO@NiZn) composite nanowire arrays were successfully grown on copper foam. The CuO nanowire backbone provided enhanced structural stability and a highly efficient electron-conducting pathway from the active hydroxide nanosheets to the current collector. The resulting CuO@NiZn as the battery-type electrode for supercapacitor application delivered a high capacity of 306.2 mAh g−1 at a current density of 0.8 A g−1 and a very stable capacity of 195.1 mAh g−1 at 4 A g−1 for 10,000 charge–discharge cycles. Furthermore, a quasi-solid-state hybrid supercapacitor (qss HSC) was assembled with active carbon, exhibiting 125.3 mAh g−1 at 0.8 A g−1 and a capacity of 41.6 mAh g−1 at 4 A g−1 for 5000 charge–discharge cycles. Furthermore, the qss HSC was able to deliver a high energy density of about 116.0 Wh kg−1. Even at the highest power density of 7.8 kW kg−1, an energy density of 20.5 Wh kg−1 could still be obtained. Finally, 14 red light-emitting diodes were lit up by a single qss HSC at different bending states, showing good potential for flexible energy storage applications.
Collapse
|
22
|
He M, He Y, Zhou X, Hu Q, Ding S, Zheng Q, Lin D, Wei X. Rational design of flower-like Co-Zn LDH@Co(H 2PO 4) 2 heterojunctions as advanced electrode materials for supercapacitors. Dalton Trans 2021; 50:4643-4650. [PMID: 33721009 DOI: 10.1039/d0dt03966g] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Layered double hydroxides (LDHs) with high theoretical specific capacity have been considered as one of the most promising candidates for high-performance supercapacitors. However, the low electronic conductivity and insufficient active sites hinder the further large-scale application of bulk LDHs. Here, we successfully synthesized heterostructured Co-Zn LDH@Co(H2PO4)2 nanoflowers by a simple hydrothermal method. As the amount of Co(H2PO4)2 in the whole heterostructure increases, the nanosheets steadily evolve into nanoflowers with a high surface area, providing more electrochemically active sites. Moreover, the built-in electric field formed between Co-Zn LDH and Co(H2PO4)2 improves the conductivity of the composite electrode. As a result, the as-prepared Co-Zn LDH@Co(H2PO4)2 shows a high specific capacity of 919 C g-1 at a current density of 1 A g-1. A hybrid supercapacitor (HSC) with activated carbon (AC) as the negative electrode and Co-Zn LDH@Co(H2PO4)2 as the positive electrode delivers an energy density of 30.4 W h kg-1 at a power density of 400 W kg-1, and 95.3% of the initial capacity is retained after 5000 cycles. This study provides a novel synthesis strategy for constructing heterojunctions to enhance the energy storage properties of LDH-based materials.
Collapse
Affiliation(s)
- Miao He
- College of Chemistry and Materials Science, Sichuan Normal University, Chengdu 610066, China.
| | | | | | | | | | | | | | | |
Collapse
|
23
|
Raza N, Kumar T, Singh V, Kim KH. Recent advances in bimetallic metal-organic framework as a potential candidate for supercapacitor electrode material. Coord Chem Rev 2021. [DOI: 10.1016/j.ccr.2020.213660] [Citation(s) in RCA: 36] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/22/2022]
|
24
|
Gonzalez Z, Yus J, Moratalla R, Ferrari B. Electrophoretic deposition of binder-free TiN nanoparticles to design 3D microstructures. The role of sintering in the microstructural robustness of supercapacitor electrodes. Electrochim Acta 2021. [DOI: 10.1016/j.electacta.2020.137654] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/07/2023]
|
25
|
Qin H, Lv Y, Li P, Xiao M, Song H, Zhang Q, Yang J. Bismuth metal organic framework-derived Bi 2Se 3@C for high performance supercapacitors. NEW J CHEM 2021. [DOI: 10.1039/d1nj03904k] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Abstract
The synthesis of Bi2Se3@C materials for high performance supercapacitors through a bismuth metal organic framework (CAU-17) assisted hydrothermal selenization method followed by carbonized annealing.
Collapse
Affiliation(s)
- Hengjie Qin
- College of Materials Science and Engineering, Xi’an Shiyou University, Xi’an 710065, China
| | - Ying Lv
- College of Materials Science and Engineering, Xi’an Shiyou University, Xi’an 710065, China
| | - Ping Li
- College of Materials Science and Engineering, Xi’an Shiyou University, Xi’an 710065, China
| | - Meixia Xiao
- College of Materials Science and Engineering, Xi’an Shiyou University, Xi’an 710065, China
| | - Haiyang Song
- College of Materials Science and Engineering, Xi’an Shiyou University, Xi’an 710065, China
| | - Qian Zhang
- School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an 710049, China
| | - Jialun Yang
- School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an 710049, China
| |
Collapse
|
26
|
Guo Q, Yuan J, Tang Y, Song C, Wang D. Self-assembled PANI/CeO2/Ni(OH)2 hierarchical hybrid spheres with improved energy storage capacity for high-performance supercapacitors. Electrochim Acta 2021. [DOI: 10.1016/j.electacta.2020.137525] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/27/2022]
|
27
|
Majumdar D. Recent progress in copper sulfide based nanomaterials for high energy supercapacitor applications. J Electroanal Chem (Lausanne) 2021. [DOI: 10.1016/j.jelechem.2020.114825] [Citation(s) in RCA: 22] [Impact Index Per Article: 7.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/11/2023]
|
28
|
|
29
|
Giannakou P, Slade RC, Shkunov M. Cyclic Voltammetry Studies of Inkjet-printed NiO supercapacitors: Effect of Substrates, Printing and Materials. Electrochim Acta 2020. [DOI: 10.1016/j.electacta.2020.136539] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/28/2023]
|
30
|
Chodankar NR, Pham HD, Nanjundan AK, Fernando JFS, Jayaramulu K, Golberg D, Han YK, Dubal DP. True Meaning of Pseudocapacitors and Their Performance Metrics: Asymmetric versus Hybrid Supercapacitors. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2020; 16:e2002806. [PMID: 32761793 DOI: 10.1002/smll.202002806] [Citation(s) in RCA: 109] [Impact Index Per Article: 27.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/04/2020] [Revised: 06/12/2020] [Indexed: 05/13/2023]
Abstract
The development of pseudocapacitive materials for energy-oriented applications has stimulated considerable interest in recent years due to their high energy-storing capacity with high power outputs. Nevertheless, the utilization of nanosized active materials in batteries leads to fast redox kinetics due to the improved surface area and short diffusion pathways, which shifts their electrochemical signatures from battery-like to the pseudocapacitive-like behavior. As a result, it becomes challenging to distinguish "pseudocapacitive" and "battery" materials. Such misconceptions have further impacted on the final device configurations. This Review is an earnest effort to clarify the confusion between the battery and pseudocapacitive materials by providing their true meanings and correct performance metrics. A method to distinguish battery-type and pseudocapacitive materials using the electrochemical signatures and quantitative kinetics analysis is outlined. Taking solid-state supercapacitors (SSCs, only polymer gel electrolytes) as an example, the distinction between asymmetric and hybrid supercapacitors is discussed. The state-of-the-art progress in the engineering of active materials is summarized, which will guide for the development of real-pseudocapacitive energy storage systems.
Collapse
Affiliation(s)
- Nilesh R Chodankar
- Department of Energy & Materials Engineering, Dongguk University, Seoul, 100-715, Republic of Korea
| | - Hong Duc Pham
- Centre for Materials Science, Queensland University of Technology (QUT), 2 George Street, Brisbane, QLD, 4001, Australia
- School of Chemistry and Physics, Queensland University of Technology (QUT), 2 George Street, Brisbane, QLD, 4001, Australia
| | - Ashok Kumar Nanjundan
- School of Chemistry and Physics, Queensland University of Technology (QUT), 2 George Street, Brisbane, QLD, 4001, Australia
| | - Joseph F S Fernando
- Centre for Materials Science, Queensland University of Technology (QUT), 2 George Street, Brisbane, QLD, 4001, Australia
- School of Chemistry and Physics, Queensland University of Technology (QUT), 2 George Street, Brisbane, QLD, 4001, Australia
| | - Kolleboyina Jayaramulu
- Department of Chemistry, Indian Institute of Technology Jammu, Nagrota Bypass Road, Jammu, Jammu & Kashmir, 181221, India
| | - Dmitri Golberg
- Centre for Materials Science, Queensland University of Technology (QUT), 2 George Street, Brisbane, QLD, 4001, Australia
- School of Chemistry and Physics, Queensland University of Technology (QUT), 2 George Street, Brisbane, QLD, 4001, Australia
| | - Young-Kyu Han
- Department of Energy & Materials Engineering, Dongguk University, Seoul, 100-715, Republic of Korea
| | - Deepak P Dubal
- Centre for Materials Science, Queensland University of Technology (QUT), 2 George Street, Brisbane, QLD, 4001, Australia
- School of Chemistry and Physics, Queensland University of Technology (QUT), 2 George Street, Brisbane, QLD, 4001, Australia
| |
Collapse
|
31
|
Zhang Y, Xu R, Qin Z, Feng S, Wang W, Chen C, Ju A. Facile preparation of porous sheet-sheet hierarchical nanostructure NiO/Ni-Co-Mn-O x with enhanced specific capacity and cycling stability for high performance supercapacitors. RSC Adv 2020; 10:22422-22431. [PMID: 35514605 PMCID: PMC9054623 DOI: 10.1039/d0ra03056b] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/07/2020] [Accepted: 06/04/2020] [Indexed: 11/21/2022] Open
Abstract
NiO, Ni–Co–Mn–Ox and NiO/Ni–Co–Mn–Ox on nickel foam substrates were prepared via a chemical bath deposition–calcination. The thermodynamic behavior was observed by TG/DTA. The chemical structure and composition, phase structure and microstructures were tested by XPS, XRD, FE-SEM and TEM. The electrochemical performance was measured by CV, GCD and EIS. The mechanism for formation and enhancing electrochemical performance is also discussed. Firstly, the precursors such as NiOOH, CoOOH and MnOOH grow on nickel foam substrates from a homogeneous mixed solution via chemical bath deposition. Thereafter, these precursors are calcined and decomposed into NiO, Co3O4 and MnO2 respectively under different temperatures in a muffle furnace. Notably, NiO/Ni–Co–Mn–Ox on nickel foam substrates reveals a high specific capacity with 1023.50 C g−1 at 1 A g−1 and an excellent capacitance retention with 103.94% at 5 A g−1 after 3000 cycles in 2 M KOH, its outstanding electrochemical performance and cycling stability are mainly attributed to a porous sheet–sheet hierarchical nanostructure and synergistic effects of pseudo-capacitive materials and excellent redox reversibility. Therefore, this research offers a facile synthesis route to transition metal oxides for high performance supercapacitors. NiO, Ni–Co–Mn–Ox and NiO/Ni–Co–Mn–Ox on nickel foam substrates were prepared via a chemical bath deposition–calcination.![]()
Collapse
Affiliation(s)
- Ying Zhang
- State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, Kunming University of Science and Technology Kunming 650093 China +86 871 65161278 +86 871 65160072.,Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology Kunming 650093 China
| | - Ruidong Xu
- State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, Kunming University of Science and Technology Kunming 650093 China +86 871 65161278 +86 871 65160072.,Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology Kunming 650093 China
| | - Ziyang Qin
- Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology Kunming 650093 China
| | - Suyang Feng
- State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization, Kunming University of Science and Technology Kunming 650093 China +86 871 65161278 +86 871 65160072.,Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology Kunming 650093 China
| | - Wenbin Wang
- Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology Kunming 650093 China
| | - Chen Chen
- Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology Kunming 650093 China
| | - Ao Ju
- Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology Kunming 650093 China
| |
Collapse
|
32
|
Wang DG, Liang Z, Gao S, Qu C, Zou R. Metal-organic framework-based materials for hybrid supercapacitor application. Coord Chem Rev 2020. [DOI: 10.1016/j.ccr.2019.213093] [Citation(s) in RCA: 147] [Impact Index Per Article: 36.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/26/2022]
|
33
|
Ferreira LS, Silva TR, Silva VD, Simões TA, Araújo AJ, Morales MA, Macedo DA. Proteic sol-gel synthesis, structure and battery-type behavior of Fe-based spinels (MFe2O4, M = Cu, Co, Ni). ADV POWDER TECHNOL 2020. [DOI: 10.1016/j.apt.2019.11.015] [Citation(s) in RCA: 22] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
34
|
Synthesis of a NiMoO4/3D-rGO Nanocomposite via Starch Medium Precipitation Method for Supercapacitor Performance. BATTERIES-BASEL 2020. [DOI: 10.3390/batteries6010005] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
This paper presents research on the synergistic effects of nickel molybdate and reduced graphene oxide as a nanocomposite for further development of energy storage systems. An enhancement in the electrochemical performance of supercapacitor electrodes occurs by synthesizing highly porous structures and achieving more surface area. In this work, a chemical precipitation technique was used to synthesize the NiMoO4/3D-rGO nanocomposite in a starch media. Starch was used to develop the porosities of the nanostructure. A temperature of 350 °C was applied to transform graphene oxide sheets to reduced graphene oxide and remove the starch to obtain the NiMoO4/3D-rGO nanocomposite with porous structure. The X-ray diffraction pattern of the NiMoO4 nano particles indicated a monoclinic structure. Also, the scanning electron microscope observation showed that the NiMoO4 NPs were dispersed across the rGO sheets. The electrochemical results of the NiMoO4/3D-rGO electrode revealed that the incorporation of rGO sheets with NiMoO4 NPs increased the capacity of the nanocomposite. Therefore, a significant increase in the specific capacity of the electrode was observed with the NiMoO4/3D-rGO nanocomposite (450 Cg−1 or 900 Fg−1) when compared with bare NiMoO4 nanoparticles (350 Cg−1 or 700 Fg−1) at the current density of 1 A g−1. Our findings show that the incorporation of rGO and NiMoO4 NP redox reactions with a porous structure can benefit the future development of supercapacitors.
Collapse
|
35
|
Li W, Wu M, Shi P, Li T, Yue H, Dong Z, Gao Y, Lou X. Enhanced energy storage performance of advanced hybrid supercapacitors derived from ultrafine Ni–P@Ni nanotubes with novel three-dimensional porous network synthesized via reaction temperatures regulation. Electrochim Acta 2020. [DOI: 10.1016/j.electacta.2019.135440] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/25/2022]
|
36
|
Jung HK, Lee SJ, Han D, Hong AR, Jang HS, Lee SH, Mun JH, Lee H, Han SH, Yang D, Kim DH. Au-incorporated NiO nanocomposite thin films as electrochromic electrodes for supercapacitors. Electrochim Acta 2020. [DOI: 10.1016/j.electacta.2019.135203] [Citation(s) in RCA: 24] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/25/2022]
|
37
|
Youssry SM, El-Hallag I, Kumar R, Kawamura G, Matsuda A, El-Nahass MN. Synthesis of mesoporous Co(OH)2 nanostructure film via electrochemical deposition using lyotropic liquid crystal template as improved electrode materials for supercapacitors application. J Electroanal Chem (Lausanne) 2020. [DOI: 10.1016/j.jelechem.2019.113728] [Citation(s) in RCA: 30] [Impact Index Per Article: 7.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
38
|
Urso M, Torrisi G, Boninelli S, Bongiorno C, Priolo F, Mirabella S. Ni(OH) 2@Ni core-shell nanochains as low-cost high-rate performance electrode for energy storage applications. Sci Rep 2019; 9:7736. [PMID: 31123305 PMCID: PMC6533347 DOI: 10.1038/s41598-019-44285-1] [Citation(s) in RCA: 18] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/31/2019] [Accepted: 05/09/2019] [Indexed: 11/17/2022] Open
Abstract
Energy storage performances of Ni-based electrodes rely mainly on the peculiar nanomaterial design. In this work, a novel and low-cost approach to fabricate a promising core-shell battery-like electrode is presented. Ni(OH)2@Ni core-shell nanochains were obtained by an electrochemical oxidation of a 3D nanoporous Ni film grown by chemical bath deposition and thermal annealing. This innovative nanostructure demonstrated remarkable charge storage ability in terms of capacity (237 mAh g−1 at 1 A g−1) and rate capability (76% at 16 A g−1, 32% at 64 A g−1). The relationships between electrochemical properties and core-shell architecture were investigated and modelled. The high-conductivity Ni core provides low electrode resistance and excellent electron transport from Ni(OH)2 shell to the current collector, resulting in improved capacity and rate capability. The reported preparation method and unique electrochemical behaviour of Ni(OH)2@Ni core-shell nanochains show potential in many field, including hybrid supercapacitors, batteries, electrochemical (bio)sensing, gas sensing and photocatalysis.
Collapse
Affiliation(s)
- Mario Urso
- MATIS IMM-CNR and Dipartimento di Fisica e Astronomia "Ettore Majorana", Università di Catania, via S. Sofia 64, 95123, Catania, Italy.
| | - Giacomo Torrisi
- MATIS IMM-CNR and Dipartimento di Fisica e Astronomia "Ettore Majorana", Università di Catania, via S. Sofia 64, 95123, Catania, Italy
| | | | | | - Francesco Priolo
- MATIS IMM-CNR and Dipartimento di Fisica e Astronomia "Ettore Majorana", Università di Catania, via S. Sofia 64, 95123, Catania, Italy
| | - Salvo Mirabella
- MATIS IMM-CNR and Dipartimento di Fisica e Astronomia "Ettore Majorana", Università di Catania, via S. Sofia 64, 95123, Catania, Italy
| |
Collapse
|
39
|
Urhan BK, Demir Ü. Electrochemical fabrication of Ni or Ni(OH)2@Ni nanoparticle-decorated reduced graphene oxide for supercapacitor applications. Electrochim Acta 2019. [DOI: 10.1016/j.electacta.2019.02.020] [Citation(s) in RCA: 32] [Impact Index Per Article: 6.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/27/2022]
|
40
|
Nickel oxide nanoparticles supported onto oriented multi-walled carbon nanotube as electrodes for electrochemical capacitors. Electrochim Acta 2019. [DOI: 10.1016/j.electacta.2018.12.102] [Citation(s) in RCA: 36] [Impact Index Per Article: 7.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/22/2023]
|
41
|
Polypyrrole⁻Nickel Hydroxide Hybrid Nanowires as Future Materials for Energy Storage. NANOMATERIALS 2019; 9:nano9020307. [PMID: 30813485 PMCID: PMC6410247 DOI: 10.3390/nano9020307] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/02/2019] [Revised: 02/16/2019] [Accepted: 02/20/2019] [Indexed: 11/16/2022]
Abstract
Hybrid materials play an essential role in the development of the energy storage technologies since a multi-constituent system merges the properties of the individual components. Apart from new features and enhanced performance, such an approach quite often allows the drawbacks of single components to be diminished or reduced entirely. The goal of this paper was to prepare and characterize polymer-metal hydroxide (polypyrrole-nickel hydroxide, PPy-Ni(OH)₂) nanowire arrays demonstrating good electrochemical performance. Nanowires were fabricated by potential pulse electrodeposition of pyrrole and nickel hydroxide into nanoporous anodic alumina oxide (AAO) template. The structural features of as-obtained PPy-Ni(OH)₂ hybrid nanowires were characterized using FE-SEM and TEM analysis. Their chemical composition was confirmed by energy-dispersive x-ray spectroscopy (EDS). The presence of nickel hydroxide in the synthesized PPy-Ni(OH)₂ nanowire array was investigated by X-ray photoelectron spectroscopy (XPS). Both FE-SEM and TEM analyses confirmed that the obtained nanowires were composed of a polymer matrix with nanoparticles dispersed within. EDS and XPS techniques confirmed the presence of PPy-Ni(OH)₂ in the nanowire array obtained. Optimal working potential range (i.e., available potential window), charge propagation, and cyclic stability of the electrodes were determined with cyclic voltammetry (CV) at various scan rates. Interestingly, the electrochemical stability window for the aqueous electrolyte at PPy-Ni(OH)₂ nanowire array electrode was remarkably wider (ca. 2 times) in comparison with the non-modified PPy electrode. The capacitance values, calculated from cyclic voltammetry performed at 20 mV s-1, were 25 F cm-2 for PPy and 75 F cm-2 for PPy-Ni(OH)₂ array electrodes. The cyclic stability of the PPy nanowire array electrode up to 100 cycles showed a capacitance fade of about 13%.
Collapse
|
42
|
Fabrication of 9.6 V High-performance Asymmetric Supercapacitors Stack Based on Nickel Hexacyanoferrate-derived Ni(OH) 2 Nanosheets and Bio-derived Activated Carbon. Sci Rep 2019; 9:1104. [PMID: 30705312 PMCID: PMC6355786 DOI: 10.1038/s41598-018-37566-8] [Citation(s) in RCA: 34] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/17/2018] [Accepted: 12/10/2018] [Indexed: 11/17/2022] Open
Abstract
Hydrated Ni(OH)2 and activated carbon based electrodes are widely used in electrochemical applications. Here we report the fabrication of symmetric supercapacitors using Ni(OH)2 nanosheets and activated carbon as positive and negative electrodes in aqueous electrolyte, respectively. The asymmetric supercapacitors stack connected in series exhibited a stable device voltage of 9.6 V and delivered a stored high energy and power of 30 mWh and 1632 mW, respectively. The fabricated device shows an excellent electrochemical stability and high retention of 81% initial capacitance after 100,000 charge-discharges cycling at high charging current of 500 mA. The positive electrode material Ni(OH)2 nanosheets was prepared through chemical decomposition of nickel hexacyanoferrate complex. The XRD pattern revealed the high crystalline nature of Ni(OH)2 with an average crystallite size of ~10 nm. The nitrogen adsorption-desorption isotherms of Ni(OH)2 nanosheets indicate the formation of mesoporous Ni(OH)2 nanosheets. The chemical synthesis of Ni(OH)2 results the formation of hierarchical nanosheets that are randomly oriented which was confirmed by FE-SEM and HR-TEM analysis. The negative electrode, activated porous carbon (OPAA-700) was obtained from orange peel waste. The electrochemical properties of Ni(OH)2 nanosheets and OPAA-700 were studied and exhibit a high specific capacity of 1126 C/g and high specific capacitance of 311 F/g at current density of 2 A/g, respectively. Ni(OH)2 nanosheets delivered a good rate performance and remarkable capacitance retention of 96% at high current density of 32 A/g.
Collapse
|