Antimicrobial Features of Organic Functionalized Graphene-Oxide with Selected Amines

A review on antimicrobial mechanism and applications of graphene-based materials

In recent years, graphene and its derivatives, owing to their phenomenal surface, and mechanical, electrical, and chemical properties, have emerged as advantageous materials, especially in terms of their potential for antimicrobial applications. Particularly important among graphene's derivatives is graphene oxide (GO) due to the ease with which its surface can be modified, as well as the oxidative and membrane stress that it exerts on microbes. This review encapsulates all aspects regarding the functionalization of graphene-based materials (GBMs) into composites that are highly potent against bacterial, viral, and fungal activities. Governing factors, such as lateral size (LS), number of graphene layers, solvent and GBMs' concentration, microbial shape and size, aggregation ability of GBMs, and especially the mechanisms of interaction between composites and microbes are discussed in detail. The current and potential applications of these antimicrobial materials, especially in dentistry, osseointegration, and food packaging, have been described. This knowledge can further drive research that aims to look for the most suitable components for antimicrobial composites. The need for antimicrobial materials has seldom been more felt than during the COVID-19 pandemic, which has also been highlighted here. Possible future research areas include the exploration of GBMs' ability against algae.

In Silico and Experimental Investigation of the Biological Potential of Some Recently Developed Carprofen Derivatives

The efficient regioselective bromination and iodination of the nonsteroidal anti-inflammatory drug (NSAID) carprofen were achieved by using bromine and iodine monochloride in glacial acetic acid. The novel halogenated carprofen derivatives were functionalized at the carboxylic group by esterification. The regioselectivity of the halogenation reaction was evidenced by NMR spectroscopy and confirmed by X-ray analysis. The compounds were screened for their in vitro antibacterial activity against planktonic cells and also for their anti-biofilm effect, using Gram-positive bacteria (Staphylococcus aureus ATCC 29213, Enterococcus faecalis ATCC 29212) and Gram-negative bacteria (Escherichia coli ATCC 25922 and Pseudomonas aeruginosa ATCC 27853). The cytotoxic activity of the novel compounds was tested against HeLa cells. The pharmacokinetic and pharmacodynamic profiles of carprofen derivatives, as well as their toxicity, were established by in silico analyses.

Graphene-Oxide-Enriched Biomaterials: A Focus on Osteo and Chondroinductive Properties and Immunomodulation

Due to its exceptional physical properties, such as high electronic conductivity, good thermal stability, excellent mechanical strength, and chemical versatility, graphene has sparked a lot of interest in the scientific community for various applications. It has therefore been employed as an antibacterial agent, in photothermal therapy (PTT) and biosensors, in gene delivery systems, and in tissue engineering for regenerative purposes. Since it was first discovered in 1947, different graphene derivatives have been synthetized from pristine graphene. The most adaptable derivate is graphene oxide (GO). Owing to different functional groups, the amphiphilic structure of GO can interact with cells and exogenous or endogenous growth/differentiation factors, allowing cell adhesion, growth, and differentiation. When GO is used as a coating for scaffolds and nanomaterials, it has been found to enhance bone, chondrogenic, cardiac, neuronal, and skin regeneration. This review focuses on the applications of graphene-based materials, in particular GO, as a coating for scaffolds in bone and chondrogenic tissue engineering and summarizes the most recent findings. Moreover, novel developments on the immunomodulatory properties of GO are reported.

Novel Structures of Functionalized Graphene Oxide with Hydrazide: Characterization and Bioevaluation of Antimicrobial and Cytocompatibility Features

Graphite was oxidized to graphene oxide and activated by thionyl chloride, for further covalently linking three hydrazides with potential biological activity. The obtained materials were characterized by scanning electron microscopy with energy dispersive spectroscopy, Fourier-transform infrared and Raman spectroscopies. The presence of various functional groups specific to graphene oxide (GO) functionalized with different hydrazides was confirmed by spectral data. The ratio between D- and G-bands, observed in Raman spectra, allowed for an evaluation of the disorder degree and the mean crystallite size of the samples. The micrographs highlighted that the samples lead to the occurrence of disorders, probably caused by the sp3 carbons, the formation of oxygen-containing functional groups in the basal planes, and by various structural defects. The new graphene oxide–hydrazide derivatives were tested for their antimicrobial and cytotoxicity activity. Their antimicrobial activity against planktonic and biofilm-embedded cells was inferior to that of free hydrazides, except for GO-3 against planktonic Escherichia coli and GO-2 against Pseudomonas aeruginosa biofilm, demonstrating that further optimization is needed to be able to exploit the huge potential of GO for developing potent antimicrobials.

A Review on Graphene Based Materials and Their Antimicrobial Properties

Graphene-based materials are found as excellent resources and employed as efficient anti-microbial agents, and they have been receiving significant attention from scientists and researchers in this regard. By giving special attention to recent applications of graphene-based materials, the current review is dedicated to unveiling the antimicrobial properties of graphene and its hybrid composites and their preparation methods. Different factors like the number of layers, concentration, size, and shape of the antibacterial activity are thoroughly discussed. Graphene-based materials could damage the bacteria physically by directly contacting the cell membrane or wrapping the bacterial cell. It can also chemically react to bacteria through oxidative stress and charge transfer mechanisms. This review explains such mechanisms thoroughly and summarizes the antibacterial applications (wound bandages, coatings, food packaging, etc.) of graphene and its hybrid materials.

Antibiofilm and antimicrobial efficacy evaluation of polypyrrole nanotubes embedded in aminated gum acacia based nanocomposite

The sustainable development of natural polysaccharide-based hybrid composites is highly important for the effective replacement of metal nanoparticles in diverse applications. Here, polypyrrole nanotubes (PPyNTs) were embedded on the surface of aminated gum acacia (AGA) to produce ecofriendly nanocomposites for biomedical applications. The morphology of a PPyNT-enhanced AGA (PPyNT@AGA) hybrid nanocomposite was studied by scanning electron microscopy and transmission electron microscopy and their affirmed interactions were characterised by X-ray diffraction, Raman, Fourier transform-infrared and UV-visible spectroscopy. Interestingly, the prepared PPyNT@AGA nanocomposite exhibited 90% biofilm inhibition against gram-negative Pseudomonas aeruginosa, gram-positive Streptococcus pneumoniae and fungal strain Candida albicans with promising antimicrobial performance. This study establishes the good inhibition of a PPyNT@AGA hybrid composite against various microorganisms. The stability of the nanocomposite coupled with antimicrobial activity enables an effective strategy for diagnosing and controlling pathogens.

Benzofurazan derivatives modified graphene oxide nanocomposite: Physico-chemical characterization and interaction with bacterial and tumoral cells

Two novel graphene oxide-benzofuran derivatives composites were obtained through the covalent immobilization of [4-hydrazinyl-7nitrobenz-[2,1,3-d]-oxadiazole (NBDH) and respectively, N1-(7-nitrobenzo[c][1,2,5]oxadiazol-4-yl)benzene-1,2-diamine (NBD-PD), on graphene oxide. This covalent functionalization was achieved by activating the carboxylic groups on the surface of graphene oxide by the reaction with thionyl chloride followed by coupling with the amino group of benzofurazane derivatives to obtain the NBD derivatives grafted on graphene oxide. The formation of new materials was check by Raman spectroscopy, fluorescence, infrared spectroscopy and X-ray photoelectron spectroscopy, thermal analysis, scanning electron microscopy, and elemental mapping. The antimicrobial effect of the new composites was evaluated on Staphylococcus aureus, Escherichia coli and Pseudomonas aeruginosa, both on planktonic and adherent biofilm populations. The cytotoxic effects of the materials on human colon cancer HCT-116 cell line and the normal human fibroblast BJ cell line were evaluated by investigating cell viability and membrane integrity. Apoptosis and colony forming ability of tumor cells were also investigated following exposure to new materials. The biological results of this study have shown that the new materials have potential in combating biofilm formation and also, the tested materials induced cytotoxicity in human colon cancer HCT-116 cell line with limited effects on normal BJ fibroblasts, suggesting their antitumor potential.

Elucidating the origin of the surface functionalization - dependent bacterial toxicity of graphene nanomaterials: Oxidative damage, physical disruption, and cell autolysis

Previous studies have shown that the toxicity of graphene nanomaterials (GNMs) to bacteria are related to the surface functionalization, however, the involved mechanisms are not fully understood. The present study aims to explore the toxic mechanisms of differentially functionalized GNMs to bacteria from the aspects of physical interaction, oxidative damage and cell autolysis. Three basic functionalization of GNMs including carboxylation (G-COOH), hydroxylation (G-OH) and amination (G-NH₂) were studied. G-COOH (66% viability vs CT group) and G-OH (54%) graphene showed higher toxicity to E. coli than G-NH₂ (96%) within 3 h at a concentration of 50 mg/L. The three materials showed distinct physical interaction modes with bacterial cells. G-COOH and G-OH contact with cell membrane via their sharp edges thus causing more damage than G-NH₂ which covered the bacteria attaching along the basal plane. The three GNMs showed similar radical generation capacities, thus the direct generation of radicals is not the mechanism causing the toxicity. Instead, the GNMs can oxidize the cellular antioxidant glutathione (GSH) thereby causing oxidative damage. The oxidative capacity follows the order: G-COOH > G-OH > G-NH₂, which correlated with the antibacterial activity. Cell autolysis, the degradation of cell wall component peptidoglycan, was found to be a new mechanism inducing the death of bacteria. G-COOH and G-OH caused more cell autolysis than G-NH₂, which accounts partially for the different toxicity of the three GNMs. The findings provide significant insights into the mechanism of GNMs toxicity to bacteria for not only the risk assessment of GNMs but also the design of graphene based antibacterial materials.

Superhydrophobic graphene-based materials with self-cleaning and anticorrosion performance: An appraisal of neoteric advancement and future perspectives

Lotus like materials having superhydrophobicity is attaining greater demand due to the possibility of molding them into different high end applications. The major issue related to self-cleaning superhydrophobic surfaces is their restricted mechanical properties. The development of nanotechnology has brought many advantages in the fabrication and properties of superhydrophobic surfaces and thus it enhanced the demand of superhydrophobic surfaces. Many scientific groups have studied and reported about the superhydrophobicity exhibited by graphene and its analogous derivatives. The fabrication of the devices having properties ranging from anti-sticking and self-cleaning to anti-corrosion and low friction is made possible by the incorporation of this wonderful two-dimensional material. This review focuses on the preparation and properties of graphene based superhydrophobic coating materials with special mention to the wide range of applications rendered by them.

Toxicological response of the model fungus Saccharomyces cerevisiae to different concentrations of commercial graphene nanoplatelets

Graphene nanomaterials have attracted a great interest during the last years for different applications, but their possible impact on different biological systems remains unclear. Here, an assessment to understand the toxicity of commercial polycarboxylate functionalized graphene nanoplatelets (GN) on the unicellular fungal model Saccharomyces cerevisiae was performed. While cell proliferation was not negatively affected even in the presence of 800 mg L-1 of the nanomaterial for 24 hours, oxidative stress was induced at a lower concentration (160 mg L-1), after short exposure periods (2 and 4 hours). No DNA damage was observed under a comet assay analysis under the studied conditions. In addition, to pinpoint the molecular mechanisms behind the early oxidative damage induced by GN and to identify possible toxicity pathways, the transcriptome of S. cerevisiae exposed to 160 and 800 mg L-1 of GN was studied. Both GN concentrations induced expression changes in a common group of genes (337), many of them related to the fungal response to reduce the nanoparticles toxicity and to maintain cell homeostasis. Also, a high number of genes were only differentially expressed in the GN800 condition (3254), indicating that high GN concentrations can induce severe changes in the physiological state of the yeast.

Exposure of Smaller and Oxidized Graphene on Polyurethane Surface Improves its Antimicrobial Performance

Catheter-related infections are a common worldwide health problem, highlighting the need for antimicrobial catheters. Here, antibacterial potential of graphene nanoplatelets (GNP) incorporated in the commonly used polymer for catheter manufacture-polyurethane (PU)-is investigated. Two strategies are explored: melt-blending, producing a composite, and dip coating, where a composite layer is deposited on top of PU. GNP with different lateral sizes and oxidation degrees-GNP-M5, GNP-M15, GNP-M5ox, GNP-M15ox-are applied in both strategies, and the antimicrobial potential towards Staphylococcus epidermidis of GNP dispersions and GNP-containing PU evaluated. As dispersions, oxidized and smaller GNP powders (GNP-M5ox) inhibit 74% bacteria growth at 128 µg/mL. As surfaces, GNP exposure strongly impacts their antimicrobial profile: GNP absence at the surface of composites yields no significant effects on bacteria, while by varying GNP: PU ratio and GNP concentration, coatings enhance GNP exposure, depicting an antimicrobial profile. Oxidized GNP-containing coatings induce higher antibacterial effect than non-oxidized forms, particularly with smaller GNPox, where a homogeneous layer of fused platelets is formed on PU, leading to 70% reduction in bacterial adhesion and 70% bacterial death. This pioneering work unravels how to turn a polymer clinically used to produce catheters into an antimicrobial surface, crucial to reducing risk of infection associated with catheterization.

Nano-graphene oxide improved the antibacterial property of antisense yycG RNA on Staphylococcus aureus

BACKGROUND

Staphylococcus aureus (S. aureus) has the potential to opportunistically cause infectious diseases, including osteomyelitis, skin infections, pneumonia, and diarrhea. We previously reported that ASyycG RNA reduced the transcripts of virulent genes, and biofilm formation of S. aureus. Currently, graphene oxide (GO) nanosheets are used to efficiently deliver nucleic acids with favorable biocompatibility.

METHODS

In the current study, a GO-based recombinant pDL278 ASyycG vector transformation strategy was developed. The particle size distributions and zeta-potential of the GO-PEI-based ASyycG were evaluated. The ASyycG plasmids were labeled with gene-encoding enhanced green fluorescent protein (ASyycG-eGFP). Quantitative real-time PCR assays were performed to investigate the expression of yycF/G/H and icaADB genes. Biofilm biomass and bacterial viability of S. aureus were evaluated by scanning electron microscopy and confocal laser scanning microscopy. We found that the expression of the yycG gene was inversely correlated with levels of the ASyycG transcripts and that the GO-PEI-ASyycG strain had the lowest expression of biofilm organization-associated genes.

RESULTS

The results showed that the GO-based strategy significantly increased ASyycG transformation as a delivery system compared to the conventional competence-stimulating peptide strategy. Furthermore, GO-PEI-ASyycG suppressed bacterial biofilm aggregation and improved bactericidal effects on S. aureus after 24 h biofilm establishment.

CONCLUSIONS

Our findings demonstrated that nano-GO with antisense yycG RNA is a more effective and relatively stable strategy for the management of S. aureus infections.

Comprehensive Application of Graphene: Emphasis on Biomedical Concerns

Graphene, sp² hybridized carbon framework of one atom thickness, is reputed as the strongest material to date. It has marked its impact in manifold applications including electronics, sensors, composites, and catalysis. Current state-of-the-art graphene research revolves around its biomedical applications. The two-dimensional (2D) planar structure of graphene provides a large surface area for loading drugs/biomolecules and the possibility of conjugating fluorescent dyes for bioimaging. The high near-infrared absorbance makes graphene ideal for photothermal therapy. Henceforth, graphene turns out to be a reliable multifunctional material for use in diagnosis and treatment. It exhibits antibacterial property by directly interacting with the cell membrane. Potential application of graphene as a scaffold for the attachment and proliferation of stem cells and neuronal cells is captivating in a tissue regeneration scenario. Fabrication of 2D graphene into a 3D structure is made possible with the help of 3D printing, a revolutionary technology having promising applications in tissue and organ engineering. However, apart from its advantageous application scope, use of graphene raises toxicity concerns. Several reports have confirmed the potential toxicity of graphene and its derivatives, and the inconsistency may be due to the lack of standardized consensus protocols. The present review focuses on the hidden facts of graphene and its biomedical application, with special emphasis on drug delivery, biosensing, bioimaging, antibacterial, tissue engineering, and 3D printing applications.

Minocycline hydrochloride loaded graphene oxide enables enhanced osteogenic activity in the presence of Gram-positive bacteria, Staphylococcus aureus

Minocycline hydrochloride loaded graphene oxide films offer a solution for the issues of insufficient osseointegration and bacterial infections on the implants.