Mesoporous Titanium Dioxide: Synthesis and Applications in Photocatalysis, Energy and Biology

Transition-state defect structure: A new strategy for TiO2-based porous materials to enhance photodegradation of pollutants

The aim of this paper is to investigate the derived structure and properties of Zeolitic Imidazolate Framework-8 (ZIF-8), and the effect of residual structural on the catalytic properties after loading with Titanium Dioxide (TiO2). For this purpose, we ingeniously prepare C-ZIF-8@TiO2 with a transition-state defect structure and apply it for efficiently degrading organic dye wastewater represented by Rhodamine B (Rh-B). Thanks to the transition-state defect structure loaded with TiO2 and ZIF-8 self-derived Carbon (C) and Zinc Oxide (ZnO), the catalytic performance of C-ZIF-8@TiO2 is superior to that of TiO2 and normal TiO2/ZIF-8 composites, and it is effective in degrading a variety of antibiotics and dyes. The related characterization also shows good photovoltaic properties and long-term durability for C-ZIF-8@TiO2. The mechanism on free radical action is elucidated and the possible degradation pathway for Rh-B is speculated. Therefore, C-ZIF-8@TiO2 provides a new strategy for the degradation of organic pollutants in water bodies.

Au9 nanocluster adsorption and agglomeration control through sulfur modification of mesoporous TiO2

In the present work phenyl phosphine-protected Au9 nanoclusters were deposited onto (3-mercaptopropyl) trimethoxysilane (MPTMS) modified and unmodified mesoporous screen printed TiO2. The removal of the cluster ligands by annealing was applied to enhance the interaction between Au cluster cores and semiconductor surfaces in the creation of efficient photocatalytic systems. The heat treatment could lead to undesired agglomeration of Au clusters, affecting their unique properties as size specific clusters. To address this challenge, the semiconductor surfaces were modified by MPTMS. Characterization techniques confirm the effectiveness of the modification processes, and XPS demonstrates that S functionalized MTiO2 is more efficient than MTiO2 in increasing Au9 NCs adsorption by a factor of 10 and preventing Au cluster agglomeration even after annealing. Overall, this work contributes valuable insights into photocatalytic systems through controlled modification of semiconductor surfaces and Au nanocluster deposition.

Particle Size Measurement and Detection of Bound Proteins of Non-Porous/Mesoporous Silica Microspheres by Single-Particle Inductively Coupled Plasma Mass Spectrometry

Single-particle inductively coupled plasma mass spectrometry (spICP-MS) has been used for particle size measurement of diverse types of individual nanoparticles and micrometer-sized carbon-based particles such as microplastics. However, its applicability to the measurement of micrometer-sized non-carbon-based particles such as silica (SiO2) particles is unclear. In this study, the applicability of spICP-MS to particle size measurement of non-porous/mesoporous SiO2 microspheres with a nominal diameter of 5.0 µm or smaller was investigated. Particle sizes of these microspheres were measured using both spICP-MS based on a conventional calibration approach using an ion standard solution and scanning electron microscopy as a reference technique, and the results were compared. The particle size distributions obtained using both techniques were in agreement within analytical uncertainty. The applicability of this technique to the detection of metal-containing protein-binding mesoporous SiO2 microspheres was also investigated. Bound iron (Fe)-containing proteins (i.e., lactoferrin and transferrin) of mesoporous SiO2 microspheres were detected using Fe as a presence marker for the proteins. Thus, spICP-MS is applicable to the particle size measurement of large-sized and non-porous/mesoporous SiO2 microspheres. It has considerable potential for element-based detection and qualification of bound proteins of mesoporous SiO2 microspheres in a variety of applications.

Mesoporous Titanium Dioxide Nanoparticles-Poly(N-isopropylacrylamide) Hydrogel Prepared by Electron Beam Irradiation Inhibits the Proliferation and Migration of Oral Squamous Cell Carcinoma Cells

An urgently needed approach for the treatment of oral squamous cell carcinoma (OSCC) is the development of novel drug delivery systems that offer targeted specificity and minimal toxic side effects. In this study, we developed an injectable and temperature-sensitive composite hydrogel by combining mesoporous titanium dioxide nanoparticles (MTNs) with Poly(N-isopropylacrylamide) (PNIPAAM) hydrogel to serve as carriers for the model drug Astragalus polysaccharide (APS) using electron beam irradiation. The characteristics of MTNs, including specific surface area and pore size distribution, were analyzed, and the characteristics of MTNs-APS@Hyaluronic acid (HA), such as microscopic morphology, molecular structure, crystal structure, and loading efficiency, were examined. Additionally, the swelling ratio, gel fraction, and microscopic morphology of the composite hydrogel were observed. The in vitro cumulative release curve was plotted to investigate the sustained release of APS in the composite hydrogels. The effects on the proliferation, migration, and mitochondrial membrane potential of CAL-27 cells were evaluated using MTT assay, scratch test, and JC-1 staining. The results indicated successful preparation of MTNs with a specific surface area of 147.059 m2/g and an average pore diameter of 3.256 nm. The composite hydrogel displayed temperature-sensitive and porous characteristics, allowing for slow release of APS. Furthermore, it effectively suppressed CAL-27 cells proliferation, migration, and induced changes in mitochondrial membrane potential. The addition of autophagy inhibitors chloroquine (CQ) and 3-methyladenine (3-MA) attenuated the migration inhibition (p < 0.05).

Sonocatalytic Optimization of Titanium-Based Therapeutic Nanomedicine

Recent considerable technological advances in ultrasound-based treatment modality provides a magnificent prospect for scientific communities to conquer the related diseases, which is featured with remarkable tissue penetration, non-invasive and non-thermal characteristics. As one of the critical elements that influences treatment outcomes, titanium (Ti)-based sonosensitizers with distinct physicochemical properties and exceptional sonodynamic efficiency have been applied extensively in the field of nanomedical applications. To date, a myriad of methodologies has been designed to manipulate the sonodynamic performance of titanium-involved nanomedicine and further enhance the productivity of reactive oxygen species for disease treatments. In this comprehensive review, the sonocatalytic optimization of diversified Ti-based nanoplatforms, including defect engineering, plasmon resonance modulation, heterojunction, modulating tumor microenvironment, as well as the development of synergistic therapeutic modalities is mainly focused. The state-of-the-art Ti-based nanoplatforms ranging from preparation process to the extensive medical applications are summarized and highlighted, with the goal of elaborating on future research prospects and providing a perspective on the bench-to-beside translation of these sonocatalytic optimization tactics. Furthermore, to spur further technological advancements in nanomedicine, the difficulties currently faced and the direction of sonocatalytic optimization of Ti-based therapeutic nanomedicine are proposed and outlooked.

A review of the photocatalytic degradation of organic pollutants in water by modified TiO2

Organic pollutants in water bodies pose a serious environmental problem, and photocatalytic technology is an efficient and environmentally friendly water treatment method. Titanium dioxide (TiO2) is a widely used photocatalyst, but it suffers from some drawbacks such as a narrow light response range, fast charge recombination, and low photocatalytic activity. To improve the photocatalytic performance of TiO2, this article reviews the preparation methods, performance evaluation, and applications of modified TiO2 photocatalysts. Firstly, the article introduces the effects of doping modification, semiconductor composite modification, and other modification methods on the structure and properties of TiO2 photocatalysts, as well as the common characterization techniques and activity test methods of photocatalysts. Secondly, the article discusses the effects and mechanisms of modified TiO2 photocatalysts on degrading dye, pesticide, and other organic pollutants in water bodies, as well as the influencing factors. Finally, the article summarizes the main achievements and advantages of modified TiO2 photocatalysts in degrading organic pollutants in water bodies, points out the existing problems and challenges, and prospects for the development direction and future of this field.

Unraveling Structure-Performance Relationships in Porphyrin-Sensitized TiO2 Photocatalysts

Over the years, porphyrins have arisen as exceptional photosensitizers given their ability to act as chlorophyll-mimicking dyes, thus, transferring energy from the light-collecting areas to the reaction centers, as it happens in natural photosynthesis. For this reason, porphyrin-sensitized TiO2-based nanocomposites have been widely exploited in the field of photovoltaics and photocatalysis in order to overcome the well-known limitations of these semiconductors. However, even though both areas of application share some common working principles, the development of solar cells has led the way in what is referred to the continuous improvement of these architectures, particularly regarding the molecular design of these photosynthetic pigments. Yet, those innovations have not been efficiently translated to the field of dye-sensitized photocatalysis. This review aims at filling this gap by performing an in-depth exploration of the most recent advances in the understanding of the role played by the different structural motifs of porphyrins as sensitizers in light-driven TiO2-mediated catalysis. With this goal in mind, the chemical transformations, as well as the reaction conditions under which these dyes must operate, are taken in consideration. The conclusions drawn from this comprehensive analysis offer valuable hints for the implementation of novel porphyrin-TiO2 composites, which may pave the way toward the fabrication of more efficient photocatalysts.

Enhancing the Photocatalytic Activity of TiO2 for the Degradation of Congo Red Dye by Adjusting the Ultrasonication Regime Applied in Its Synthesis Procedure

Recently, the ultrasound-assisted sol-gel synthesis procedure of mesoporous titania (TiO2) photocatalysts caught the researcher’s attention, due to the physicochemical properties enhancement of the resulting titania nanomaterials. Thus, by varying different synthesis parameters particular characteristics could be obtained. In the present study, the ultrasound pulse on/off ratio has been considered and the effect of the envisaged parameter on the textural, morphological, and optical features of titania nanomaterial has been investigated. Therefore, X-ray Diffraction (XRD), Fourier-Transform Infrared spectroscopy (FTIR), N2-sorption measurements, SEM imaging, and UV-Vis Diffuse Reflectance spectroscopy (UVDR) have been used. And further, the photocatalytic activity of the prepared TiO2 materials was evaluated by the features developed about the applied ultrasound pulse on/off ratio as 1/1, 2/1, 3/1, 4/1, 1/3 and 2/2. It was found that the ultrasound pulse on/off ratio considered in the synthesis procedure of titania leads to TiO2 materials with different textural (SBET = 98–156 m2/g), morphological, and optical (Eg = 3.1–3.2 eV) characteristics. For this reason, TiO2 nanomaterials prepared were found to exhibit suitable features for photocatalytic applications. Thus, the TiO2 4.1 sample prepared at 4/1 ultrasound pulse on/off ratio revealed the highest photodegradation efficiency of Congo Red dye (98.28%) as the results of photocatalytic tests show. More than that, a possible reaction mechanism of the CR photodegradation process through the contribution of reactive oxygen species (·HO, ·O2−), holes (h+), and electrons (e−) of developed titania photocatalyst was proposed.

Application of porosities in the transparent electrode layer of a perovskite solar cell for performance enhancement

Substitution of monocrystalline or polycrystalline silicon as active materials in photovoltaics with highly efficient perovskite materials is quite common. Although perovskite materials offer better flexibility, are cost-effective, and have higher conversion efficiency, they still require structural modifications for better performance. This study quantitatively investigates how mesoporous top surfaces improve the performance of methylammonium lead iodide (C H ₃ N H ₃ P b I ₃) perovskite solar cells. In fact, both the diameter and the depth of the pores have been tuned to achieve better performance. The performance is further optimized by replacing mesoporous active material with planar active material coated with mesoporous indium tin oxide (ITO). We have demonstrated that the proposed structure achieves the maximum conversion efficiency (η) of 27.43% with an open-circuit voltage (V _{O C} ) of 1.07 V and a short circuit current density (J _{S C} ) of 29.09m A/c m ², with a fill factor (FF) of 88.10%.

Recent advances in nanotechnology for remediation of heavy metals

Heavy metal contamination of the environment has become an alarming environmental issue that has constituted serious threats to humans and the ecosystem. These metals have been identified as a priority class of pollutants due to their persistency in the environment and their potential to bioaccumulate in biological systems. Consequently, the remediation of heavy metals from various environmental matrices becomes a critical topic from the biological and environmental perspectives. To this end, various research interests have shifted to the need to put forward economically feasible and highly efficient approaches for mitigating these contaminants in the environment. Thus, numerous conventional approaches have reportedly been employed for the remediation of heavy metals, with each of the methods having its inherent limitations. More recently, studies have revealed that nanomaterials in their various forms show unique potential for the removal of various contaminants including heavy metals in comparison to their bulk counterparts making them a topic of importance to researchers in various fields. Also, various studies have documented specifically tailored nanomaterials that have been synthesized for the removal of heavy metals from various environmental matrices. This review provides up-to-date information on the application of nanotechnology for the remediation of heavy metals. It highlights various nanomaterials that have been employed for the remediation of heavy metals, current details on their methods of synthesis, factors affecting their adsorption processes, and the environmental and health impact of nanomaterials. Finally, it provides the challenges and future trends of nanomaterials for heavy metal removal.

PLGA–TiO2 as a Carrier System for Drug Release

This paper reports the results of the PLGA–TiO2 nanocomposite regarding the green synthesis of titanium dioxide nanoparticles using a natural extract, its characterization, and encapsulation with poly(lactic-co-glycolic acid) (PLGA). UV–visible spectrometry was used for the identification of terpenes present in the extracts. The morphology of the nanoparticles was determined by scanning electron microscopy. Infrared spectroscopy was used for the determination of functional groups, while X-ray diffraction was used to determine the crystal structure. The analysis of the extended release of the encapsulated extract in the matrix of the nanomaterial resulted in a maximum visible UV absorbance at approximately 260 nm and confirmed the synthesis of titanium dioxide nanoparticles. Moreover, terpenes enhance synthesis and stabilize titanium dioxide nanoparticles. The synthesized structures are spherical and amorphous, 44 nm in size, and encapsulated at 65 nm.

On the Morphology of Nanostructured TiO2 for Energy Applications: The Shape of the Ubiquitous Nanomaterial

Nanostructured titania is one of the most commonly encountered constituents of nanotechnology devices for use in energy-related applications, due to its intrinsic functional properties as a semiconductor and to other favorable characteristics such as ease of production, low toxicity and chemical stability, among others. Notwithstanding this diffusion, the quest for improved understanding of the physical and chemical mechanisms governing the material properties and thus its performance in devices is still active, as testified by the large number of dedicated papers that continue to be published. In this framework, we consider and analyze here the effects of the material morphology and structure in determining the energy transport phenomena as cross-cutting properties in some of the most important nanophase titania applications in the energy field, namely photovoltaic conversion, hydrogen generation by photoelectrochemical water splitting and thermal management by nanofluids. For these applications, charge transport, light transport (or propagation) and thermal transport are limiting factors for the attainable performances, whose dependence on the material structural properties is reviewed here on its own. This work aims to fill the gap existing among the many studies dealing with the separate applications in the hope of stimulating novel cross-fertilization approaches in this research field.

Mesoporous Materials as Elements of Modern Drug Delivery Systems for Anti-Inflammatory Agents: A Review of Recent Achievements

Interest in the use of mesoporous materials as carriers of medicinal substances has been steadily increasing in the last two decades. Mesoporous carriers have application in the preparation of delivery systems for drugs from various therapeutic groups; however, their use as the carriers of anti-inflammatory agents is particularly marked. This review article, with about 170 references, summarizes the achievements in the application of mesoporous materials as the carriers of anti-inflammatory agents in recent years. This article will discuss a variety of mesoporous carriers as well as the characteristics of their porous structure that determine further use of these materials in the field of medical applications. Special attention will be paid to the progress observed in the construction of stimuli-responsive drug carriers and systems providing site-specific drug delivery. Subsequently, a review of the literature devoted to the use of mesoporous matrices as the carriers of anti-inflammatory drugs was carried out.

Evaluation of Mesoporous TiO2 Layers as Glucose Optical Sensors

Porous materials are currently the basis of many optical sensors because of their ability to provide a higher interaction between the light and the analyte, directly within the optical structure. In this study, mesoporous TiO₂ layers were fabricated using a bottom-up synthesis approach in order to develop optical sensing structures. In comparison with more typical top-down fabrication strategies where the bulk constitutive material is etched in order to obtain the required porous medium, the use of a bottom-up fabrication approach potentially allows increasing the interconnectivity of the pore network, hence improving the surface and depth homogeneity of the fabricated layer and reducing production costs by synthesizing the layers on a larger scale. The sensing performance of the fabricated mesoporous TiO₂ layers was assessed by means of the measurement of several glucose dilutions in water, estimating a limit of detection even below 0.15 mg/mL (15 mg/dL). All of these advantages make this platform a very promising candidate for the development of low-cost and high-performance optical sensors.

Instantaneous Photocarrier Transport at the Interface in Perovskite Solar Cells to Generate Photovoltage

The instantaneous photocarrier transport of perovskite solar cells was evaluated by assessing laser-induced terahertz (THz) emission to understand carrier dynamics in perovskite solar cells. The waveform of laser-induced THz radiation from an interface between the TiO2 electron transport layer and perovskite active layer of an n-i-p perovskite solar cell with varying external bias was measured using THz-time domain spectroscopy. The amplitude of the THz radiation decreased with increasing reverse bias voltage. The waveform of the THz radiation was inverted at a strong reverse bias. The measured bias voltage dependence suggests that the transient current generated at the interface between perovskite and TiO2 owing to the higher mobility of electrons than that of holes, namely the photo-Dember effect, is the dominant source of THz radiation and the destructive contribution of the interfacial electric field inverts the transient current when a reverse bias causes a strong interfacial electric field. The significant contribution of the interfacial electric field has not been previously reported in perovskite thin films and is unique to solar cells. We believe that band bending at interfaces in perovskite solar cells will be determined from the THz emission with proper modeling.

Doping of TiO2 Using Metal Waste (Door Key) to Improve Its Photocatalytic Efficiency in the Mineralization of an Emerging Contaminant in an Aqueous Environment

Photocatalysis is an effective advanced oxidation process to mineralize recalcitrant contaminants in aqueous media. TiO2 is the most used photocatalyst in this type of process. To improve the deficiencies of this material, one of the most used strategies has been to dope TiO2 with metallic ions. Chemical reagents are often used as dopant precursors. However, due to the depletion of natural resources, in this work it was proposed to substitute chemical reagents and instead use a metallic residue (door key) as a doping precursor. The materials were synthesized using the sol–gel method and calcined at 400 °C to obtain the crystal structure of anatase. The characterization of the materials was carried out using X-ray diffraction (XRD), transmission electron microscopy (TEM), diffuse reflectance spectroscopy (DRS), scanning electron microscopy–energy-dispersive X-ray analysis (SEM-EDX) methods X-ray photoelectron spectroscopy (XPS), and inductively coupled plasma optical emission spectroscopy (ICP-OES). The results obtained indicate that Cu+/Cu2+ and Zn2+ ions coexist in the support, which modifies the physicochemical properties of TiO2 and improves its photocatalytic efficiency. The synergistic effect of the dopants in TiO2 allowed the mineralization of diclofenac in an aqueous medium when T-DK (1.0) was used as photocatalyst and simulated solar radiation as an activation source.

Modulation of the photocatalytic activity and crystallinity of F-TiO2 nanoparticles by using green natural carboxylic acids

Ultrareactive F-doped mesoporous TiO2 nanoparticles with potential environmental applications have been synthesized using green natural carboxylic acids.

Bottom-Up Synthesis of Mesoporous TiO2 Films for the Development of Optical Sensing Layers

Many optical sensors exploit the interesting properties of porous materials, as they ensure a stronger interaction between the light and the analyte directly within the optical structure. Most porous optical sensors are mainly based on porous silicon and anodized aluminum oxide, showing high sensitivities. However, the top-down strategies usually employed to produce those materials might offer a limited control over the properties of the porous layer, which could affect the homogeneity, reducing the sensor reproducibility. In this work, we present the bottom-up synthesis of mesoporous TiO2 Fabry-Pérot optical sensors displaying high sensitivity, high homogeneity, and low production cost, making this platform a very promising candidate for the development of high-performance optical sensors.

Mesoporous TiO2-based architectures as promising sensing materials towards next-generation biosensing applications

In the past two decades, mesoporous TiO2 has emerged as a promising material for biosensing applications. In particular, mesoporous TiO2 materials with uniform, well-organized pores and high surface areas typically exhibit superior biosensing performance, which includes high sensitivity, broad linear response, low detection limit, good reproducibility, and high specificity. Therefore, the development of biosensors based on mesoporous TiO2 has significantly intensified in recent years. In this review, the expansion and advancement of mesoporous TiO2-based biosensors for glucose detection, hydrogen peroxide detection, alpha-fetoprotein detection, immobilization of enzymes, proteins, and bacteria, cholesterol detection, pancreatic cancer detection, detection of DNA damage, kanamycin detection, hypoxanthine detection, and dichlorvos detection are summarized. Finally, the future perspective and research outlook on the utilization of mesoporous TiO2-based biosensors for the practical diagnosis of diseases and detection of hazardous substances are also given.

Connecting theory and simulation with experiment for the study of diffusion in nanoporous solids

Nanoporous solids are ubiquitous in chemical, energy, and environmental processes, where controlled transport of molecules through the pores plays a crucial role. They are used as sorbents, chromatographic or membrane materials for separations, and as catalysts and catalyst supports. Defined as materials where confinement effects lead to substantial deviations from bulk diffusion, nanoporous materials include crystalline microporous zeotypes and metal–organic frameworks (MOFs), and a number of semi-crystalline and amorphous mesoporous solids, as well as hierarchically structured materials, containing both nanopores and wider meso- or macropores to facilitate transport over macroscopic distances. The ranges of pore sizes, shapes, and topologies spanned by these materials represent a considerable challenge for predicting molecular diffusivities, but fundamental understanding also provides an opportunity to guide the design of new nanoporous materials to increase the performance of transport limited processes. Remarkable progress in synthesis increasingly allows these designs to be put into practice. Molecular simulation techniques have been used in conjunction with experimental measurements to examine in detail the fundamental diffusion processes within nanoporous solids, to provide insight into the free energy landscape navigated by adsorbates, and to better understand nano-confinement effects. Pore network models, discrete particle models and synthesis-mimicking atomistic models allow to tackle diffusion in mesoporous and hierarchically structured porous materials, where multiscale approaches benefit from ever cheaper parallel computing and higher resolution imaging. Here, we discuss synergistic combinations of simulation and experiment to showcase theoretical progress and computational techniques that have been successful in predicting guest diffusion and providing insights. We also outline where new fundamental developments and experimental techniques are needed to enable more accurate predictions for complex systems.

Ordered mesoporous metal oxides for electrochemical applications: correlation between structure, electrical properties and device performance

Ordered mesoporous metal oxides with a high specific surface area, tailored porosity and engineered interfaces are promising materials for electrochemical applications. In particular, the method of evaporation-induced self-assembly allows the formation of nanocrystalline films of controlled thickness on polar substrates. In general, mesoporous materials have the advantage of benefiting from a unique combination of structural, chemical and physical properties. This Perspective article addresses the structural characteristics and the electrical (charge-transport) properties of mesoporous metal oxides and how these affect their application in energy storage, catalysis and gas sensing.

Systematic Incorporation of Gold Nanoparticles onto Mesoporous Titanium Oxide Particles for Green Catalysts

This report describes the systematic incorporation of gold nanoparticles (AuNPs) onto mesoporous TiO2 (MPT) particles without strong attractive forces to efficiently serve as reactive and recyclable catalysts in the homocoupling of arylboronic acid in green reaction conditions. Unlike using nonporous TiO2 particles and conventional SiO2 particles as supporting materials, the employment of MPT particles significantly improves the loading efficiency of AuNPs. The incorporated AuNPs are less than 10 nm in diameter, regardless of the amount of applied gold ions, and their surfaces, free from any modifiers, act as highly reactive catalytic sites to notably improve the yields in the homocoupling reaction. The overall physical properties of the AuNPs integrated onto the MPT particles are thoroughly examined as functions of the gold content, and their catalytic functions, including the rate of reaction, activation energy, and recyclability, are also evaluated. While the rate of reaction slightly increases with the improved loading efficiency of AuNPs, the apparent activation energies do not clearly show any correlation with the size or distribution of the AuNPs under our reaction conditions. Understanding the formation of these types of composite particles and their catalytic functions could lead to the development of highly practical, quasi-homogeneous catalysts in environmentally friendly reaction conditions.

Anti-CD19 mAb modified mesoporous titanium dioxide as exclusively targeting vector for efficient B-lymphoblastic leukemia therapy

B lymphoblastic leukemia (B-LL) is a clonal hematopoietic stem cell neoplasm derived from B-cell progenitors, which mainly occurs in children and adolescents and is one of the main causes of death from malignant tumors in this population. The surface marker CD19 is specifically expressed on the membrane of most malignant B-cells, which is widely used as a marker of B-LL antigen-specific immunotherapy. In this study, mesoporous titanium dioxide nanoparticles (MTNs)-based antibody drug delivery system was designed for B-LL treatment. Anti-CD19 monoclonal antibody was conjugated to PEGylated MTNs, and doxorubicin (DOX) was loaded in the nanoparticle. The CD19-PEG-MTN/DOX nanoparticle could recognize CD19⁺B-LL cell lines and induced them apoptosis, but nontoxic for the normal cells. Further, after treated with CD19-PEG-MTN/DOX nanoparticle, pro-apoptotic proteins Bax and Caspase-3 in KOPN 8 and NALM-6 cells were significantly upregulated, but anti-apoptotic proteins Bcl2, MCL-1, HSP 70, and BAG 3 were downregulated, which indicated the activation of the apoptosis pathway by the nanodrug. By contrast, CD19-PEG-MTN/DOX didn't play a part on CD19^-cell line U937. Besides, the cytotoxicity of CD19-PEG-MTN/DOX was low with good biocompatibility. Collectively, CD19-PEG-MTN/DOX is a promising antitumor nanodrug for the treatment of B-LL.

Comparative Catalytic Properties of Supported and Encapsulated Gold Nanoparticles in Homocoupling Reactions

This report describes strategies to increase the reactive surfaces of integrated gold nanoparticles (AuNPs) by employing two different types of host materials that do not possess strong electrostatic and/or covalent interactive forces. These composite particles are then utilized as highly reactive and recyclable quasi-homogeneous catalysts in a C-C bond forming reaction. The use of mesoporous TiO₂ and poly(N-isopropylacrylamide), PNIPAM, particles allows for the formation of relatively small and large guest AuNPs and provides the greatly improved stability of the resulting composite particles. As these AuNPs are physically incorporated into the mesoporous TiO₂ (i.e., supported AuNPs) and PNIPAM particles (i.e., encapsulated AuNPs), their surfaces are maximized to serve as highly reactive catalytic sites. Given their increased physicochemical properties (e.g., stability, dispersity, and surface area), these composite particles exhibit notably high catalytic activity, selectivity, and recyclability in the homocoupling of phenylboronic acid in water and EtOH. Although the small supported AuNPs display slightly faster reaction rates than the large encapsulated AuNPs, the apparent activation energies (E_a) of both composite particles are comparable, implying no obvious correlation with the size of guest AuNPs under the reaction conditions. Investigating the overall physical properties of various composite particles and their catalytic functions, including the reactivity, selectivity, and E_a, can lead to the development of highly practical quasi-homogeneous catalysts in green reaction conditions.

Low Temperature Synthesis of Photocatalytic Mesoporous TiO2 Nanomaterials

We report the synthesis of mesoporous TiO2 nanostructures based on the decomposition of TiOSO4 in aqueous alkaline solution at room temperature, followed by mild thermal treatment (110 °C) in an oven and suitable to yield up to 40 g of product per batch. The duration of the thermal treatment was found to be crucial to control crystalline phase composition, specific surface area, surface chemistry and, accordingly, the photocatalytic properties of the obtained TiO2 nanocrystals. The thorough investigation of the prepared samples allowed us to explain the relationship between the structure of the obtained nanoparticles and their photocatalytic behavior, that was tested in a model reaction. In addition, the advantage of the mild treatment against a harsher calcination at 450 °C was illustrated. The proposed approach represents a facile and sustainable route to promptly access an effective photocatalyst, thus holding a significant promise for the development of solutions suitable to real technological application in environmental depollution.

Mesoporous Ce-doped Ti:Ash Photocatalyst Investigation in Visible Light Photocatalytic Water Pretreatment Process

The treatment of organic pollutants in water including semiconductor photocatalysis is a promising approach to disinfect water. The objective of this study is to investigate the effect of Ce loaded on mesoporous Ti:Ash catalyst for water pretreatment process. The mesoporous Ti:Ash catalyst that doped with Ce was synthesized through wet impregnation method with 5%, 10%, and 15% weight percentage of Ce doped on 40:60 Ti:Ash. The photocatalytic properties were characterized through X-ray powder diffraction, scanning electron microscopy with energy-dispersive X-ray spectroscopy, N2 adsorption-desorption studies and diffuse reflectance UV–vis absorption spectroscopy. It is found that the Ti:Ash nanocomposites doped with Ce shifted the light absorption band-edge position to the visible region. Moreover, the Ce doped Ti:Ash has large surface area and pore diameter. The Ce doping could significantly improve the absorption edge of visible light and adjust the cut-off absorption wavelength from 404 nm to 451, 477 and 496 nm for 5%, 10% and 15% Ce-doped mesoporous Ti:Ash catalysts, respectively. As the Ce doping ratio increased, the band gaps decreased from 3.06 eV to 2.53 eV. The most contaminant reduction up to 45% was achieved when Ti:Ash:Ce 40:55:5 was used. Higher Ce loading on the photocatalyst may reduce the photocatalyst performance because supernumerary metal loading on TiO2 can block TiO2 defect sites which are necessary for the adsorption and photoactivation. The OPFA also acts as an adsorbent for some pollutants besides, reducing the water salinity. It can be deduced that the hybrid TiO2 photocatalyst that synthesized with OPFA and doped with Ce has huge potential to treat seawater prior to commercial seawater desalination process. Copyright © 2020 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

A Novel Tin-Doped Titanium Oxide Nanocomposite for Efficient Photo-Anodic Water Splitting

Herein, we report the expedient synthesis of new nanocomposite Sn_0.39Ti_0.61O₂·TiO₂ flakes using simple sol-gel and calcination methods. In order to prepare this material, first, we generated a polymeric gel using cost-effective and easily accessible precursors such as SnCl₄, titanium isopropoxide, and tetrahydrofuran (THF). A small amount of triflic acid was used to initiate THF polymerization. The calcination of the resulting gel at 500 °C produced a Sn-Ti bimetallic nanocomposite. This newly synthesized Sn_0.39Ti_0.61O₂·TiO₂ was characterized by X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and UV-visible spectroscopy. The photoelectrochemical (PEC) studies were performed for the first time using Sn_0.39Ti_0.61O₂·TiO₂ coated over fluorine-doped tin oxide (FTO) under simulated 1 sun solar radiation. The chronoamperometric study of the Sn_0.39Ti_0.61O₂·TiO₂/FTO revealed the repeatable and substantially higher photocurrent for the oxygen evolution reaction (OER) when compared to only TiO₂. Moreover, the synthesized material exhibited high stability both in the presence and absence of light. The photocatalytic studies suggested that the sol-gel-synthesized Sn_0.39Ti_0.61O₂·TiO₂ can be efficiently used as a photoanode in the water-splitting reaction.

Fundamentals and recent progress relating to the fabrication, functionalization and characterization of mesostructured materials using diverse synthetic methodologies

Since 1990 and the invention of the very first generation of ordered mesoporous silica materials, several innovative methodologies have been applied to synthesize, characterize, and modify silica/non-silica mesoporous materials. The growth of the mesoporous materials field has generated significant environmental and economic advantages compared to various other industrial developments. According to the literature, there are several key synthesis approaches and parameters that can affect the structural, textural and morphological characteristics of mesoporous materials. To date, huge attempts have been made to maximize the activities and selectivities of these materials through either the in situ or post-synthesis functionalization of the large interior surface areas and internal mesostructured frameworks in the presence of specific organic/inorganic components. However, the main challenge is to provide good control over the incorporation and distribution of multiple guest components within the mesostructured hosts. Mesostructured materials have received great attention for various applications, such as being used in electronics, medicine, photocatalysis, catalyst supports, catalysis, absorbers, sensors, gas separation, etc. In the current paper, several recent developments have been highlighted and reviewed regarding the fabrication and characterization of siliceous/non-siliceous mesoporous materials via various synthetic approaches. Furthermore, the availability of diverse functionalization methods has been reviewed to provide comprehensive approaches for synthesizing new generations of suitably modified mesoporous materials with superior structural, physicochemical, and textural characteristics.

Since 1990 and the invention of the very first generation of ordered mesoporous silica materials, several innovative methodologies have been applied to synthesize, characterize, and modify silica/non-silica mesoporous materials.

Porosity determination of nano- and sub-micron particles by single particle inductively coupled plasma mass spectrometry

By comparing the spICP-MS signal intensities of solid and porous nanoparticles of the same composition and size, the porosity of particles can be determined.

An overview of photocatalytic degradation: photocatalysts, mechanisms, and development of photocatalytic membrane

Photocatalysis is an ecofriendly technique that emerged as a promising alternative for the degradation of many organic pollutants. The weaknesses of the present photocatalytic system which limit their industrial applications include low-usage of visible light, fast charge recombination, and low migration ability of the photo-generated electrons and holes. Therefore, various elements such as noble metals and transition metals as well as non-metals and metalloids (i.e., graphene, carbon nanotube, and carbon quantum dots) are doped into the photocatalyst as co-catalysts to enhance the photodegradation performance. The incorporation of the co-catalyst which alters the photocatalytic mechanism was discussed in detail. The application of photocatalysts in treating persistent organic pollutants such as pesticide, pharmaceutical compounds, oil and grease and textile in real wastewater was also discussed. Besides, a few photocatalytic reactors in pilot scale had been designed for the effort of commercializing the system. In addition, hybrid photocatalytic system integrating with membrane filtration together with their membrane fabrication methods had also been reviewed. This review outlined various types of heterogeneous photocatalysts, mechanism, synthesis methods of biomass supported photocatalyst, photocatalytic degradation of organic substances in real wastewater, and photocatalytic reactor designs and their operating parameters as well as the latest development of photocatalyst incorporated membrane.

Influence of Semiconductor Morphology on Photocatalytic Activity of Plasmonic Photocatalysts: Titanate Nanowires and Octahedral Anatase Nanoparticles

Octahedral anatase particles (OAP) with eight exposed and thermodynamically most stable (101) facets were prepared by an ultrasonication-hydrothermal (US-HT) reaction from potassium titanate nanowires (TNW). The precursor (TNW) and the product (OAP) of US-HT reaction were modified with nanoparticles of noble metals (Au, Ag or Pt) by photodeposition. Samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), diffuse reflectance spectroscopy (DRS), scanning transmission electron microscopy (STEM) and time-resolved microwave conductivity (TRMC). The photocatalytic activity was investigated in three reaction systems, i.e., anaerobic dehydrogenation of methanol and oxidative decomposition of acetic acid under UV/vis irradiation, and oxidation of 2-propanol under vis irradiation. It was found that hydrogen liberation correlated with work function of metals, and thus the most active were platinum-modified samples. Photocatalytic activities of bare and modified OAP samples were much higher than those of TNW samples, probably due to anatase presence, higher crystallinity and electron mobility in faceted NPs. Interestingly, noble metals showed different influence on the activity depending on the semiconductor support, i.e., gold-modified TNW and platinum-modified OAP exhibited the highest activity for acetic acid decomposition, whereas silver- and gold-modified samples were the most active under vis irradiation, respectively. It is proposed that the form of noble metal (metallic vs. oxidized) as well as the morphology (well-organized vs. uncontrolled) have a critical effect on the overall photocatalytic performance. TRMC analysis confirmed that fast electron transfer to noble metal is a key factor for UV activity. It is proposed that the efficiency of plasmonic photocatalysis (under vis irradiation) depends on the oxidation form of metal (zero-valent preferable), photoabsorption properties (broad localized surface plasmon resonance (LSPR)), kind of metal (silver) and counteraction of “hot” electrons back transfer to noble metal NPs (by controlled morphology and high crystallinity).

Scalable Synthesis of Mesoporous TiO2 for Environmental Photocatalytic Applications

Increasing environmental concern, related to pollution and clean energy demand, have urged the development of new smart solutions profiting from nanotechnology, including the renowned nanomaterial-assisted photocatalytic degradation of pollutants. In this framework, increasing efforts are devoted to the development of TiO2-based nanomaterials with improved photocatalytic activity. A plethora of synthesis routes to obtain high quality TiO2-based nanomaterials is currently available. Nonetheless, large-scale production and the application of nanosized TiO2 is still hampered by technological issues and the high cost related to the capability to obtain TiO2 nanoparticles with high reaction yield and adequate morphological and structural control. The present review aims at providing a selection of synthetic approaches suitable for large-scale production of mesoporous TiO2-based photocatalysts due to its unique features including high specific surface area, improved ultraviolet (UV) radiation absorption, high density of surface hydroxyl groups, and significant ability for further surface functionalization The overviewed synthetic strategies have been selected and classified according to the following criteria (i) high reaction yield, (ii) reliable synthesis scale-up and (iii) adequate control over morphological, structural and textural features. Potential environmental applications of such nanostructures including water remediation and air purification are also discussed.

Scalable Synthesis of Mesoporous TiO2 for Environmental Photocatalytic Applications

Increasing environmental concern, related to pollution and clean energy demand, have urged the development of new smart solutions profiting from nanotechnology, including the renowned nanomaterial-assisted photocatalytic degradation of pollutants. In this framework, increasing efforts are devoted to the development of TiO2-based nanomaterials with improved photocatalytic activity. A plethora of synthesis routes to obtain high quality TiO2-based nanomaterials is currently available. Nonetheless, large-scale production and the application of nanosized TiO2 is still hampered by technological issues and the high cost related to the capability to obtain TiO2 nanoparticles with high reaction yield and adequate morphological and structural control. The present review aims at providing a selection of synthetic approaches suitable for large-scale production of mesoporous TiO2-based photocatalysts due to its unique features including high specific surface area, improved ultraviolet (UV) radiation absorption, high density of surface hydroxyl groups, and significant ability for further surface functionalization The overviewed synthetic strategies have been selected and classified according to the following criteria (i) high reaction yield, (ii) reliable synthesis scale-up and (iii) adequate control over morphological, structural and textural features. Potential environmental applications of such nanostructures including water remediation and air purification are also discussed.

Titanium Oxide Microspheres with Tunable Size and Phase Composition

Due to their unique physical and chemical properties, monodisperse titanium oxide microspheres can be used in dye-sensitized solar cells, as cosmetic pigments, and for other applications. However, the synthesis of microspheres with narrow size distribution, desired phase composition, and porosity is still a challenge. In this work, spherical titania particles with controllable size, crystallinity, and pore size were obtained by Ti(OⁿBu)₄ hydrolysis in ethanol. The influence of NaOH addition on the particles’ size and morphology was investigated for the first time. Particle diameter can be tailored from 300 nm to 1.5 μm by changing water and NaOH concentrations. Particle size was analyzed by the statistical processing of scanning electron microscopy (SEM) images and differential centrifugal sedimentation (DCS) measurements. Optical properties of the microspheres were studied by diffuse reflectance UV-Vis spectroscopy. Thermal and hydrothermal treatment allowed transforming amorphous phase in as-prepared particles into nanocrystalline anatase and/or rutile. Transmission electron microscopy (TEM) study of the lamellae, cut out from spherical particles using focused ion beam (FIB), revealed that as-synthesized microspheres are non-hollow, homogeneous, and crystallize throughout the whole volume of the particle. The spherical particles possess photoprotective properties; the highest sun protection factor (SPF) was observed for amorphous microspheres.

Synthesis and Characterization of TiO₂-ZnO-MgO Mixed Oxide and Their Antibacterial Activity

TiO₂-ZnO-MgO mixed oxide nanomaterials (MONs) were synthetized via the sol-gel method and characterized by scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), nitrogen physisorption analysis, X-ray diffraction (XRD), UV-Vis diffuse reflectance spectroscopy (UV-Vis DRS), Fourier transform infrared spectroscopy (FTIR), and color (Luminosity (L), a, b, Chrome, hue) parameters. Furthermore, the antimicrobial activity of the MONs was tested against Escherichia coli (EC), Salmonella paratyphi (SP), Staphylococcus aureus (SA), and Listeria monocytogenes (LM). The MONs presented a semi globular-ovoid shape of ≤100 nm. Samples were classified as mesoporous materials and preserved in the TiO₂ anatase phase, with slight changes in the color parameters of the MONs in comparison with pure TiO₂. The MONs exhibited antimicrobial activity, and their effect on the tested bacteria was in the following order: EC > SP > SA > LM. Therefore, MONs could be used as antimicrobial agents for industrial applications.