Comparative Surface Morphology, Chemical Composition, and Cytocompatibility of Bio-C Repair, Biodentine, and ProRoot MTA on hDPCs

"Biological responses of two calcium-silicate-based cements on a tissue-engineered 3D organotypic deciduous pulp analogue"

OBJECTIVES

The biological responses of MTA and Biodentine™ has been assessed on a three-dimensional, tissue-engineered organotypic deciduous pulp analogue.

METHODS

Human endothelial (HUVEC) and dental mesenchymal stem cells (SHED) at a ratio of 3:1, were incorporated into a collagen I/fibrin hydrogel; succeeding Biodentine™ and MTA cylindrical specimens were placed in direct contact with the pulp analogue 48 h later. Cell viability/proliferation and morphology were evaluated through live/dead staining, MTT assay and Scanning Electron Microscopy (SEM), and expression of angiogenic, odontogenic markers through real time PCR.

RESULTS

Viable cells dominated at day 3 after treatment presenting typical morphology, firmly attached within the hydrogel structures, as shown by live/dead staining and SEM images. MTT assay at day 1 presented a significant increase of cell proliferation in Biodentine™ group. Real-time PCR showed significant upregulation of odontogenic markers DSPP, BMP-2 (day 3,6), RUNX2, ALP (day 3) in contact with Biodentine™ compared to MTA and the control, whereas MTA promoted significant upregulation of DSPP, BMP-2, RUNX2, Osterix (day 3) and ALP (day 6) compared to the control. MSX1 presented downregulation in both experimental groups. Expression of angiogenic markers VEGFa and ANGPT-1 at day 3 was significantly upregulated in contact with Biodentine™ and MTA respectively, while the receptors VEGFR1, VEGFR2 and Tie-2, as well as PECAM-1 were downregulated.

SIGNIFICANCE

Both calcium silicate-based materials are biocompatible and exert positive angiogenic and odontogenic effects, although Biodentine™ during the first days of culture, seems to induce higher cell proliferation and provoke a more profound odontogenic and angiogenic response from SHED.

Effect of pH on the solubility and volumetric change of ready-to-use Bio-C Repair bioceramic material

Acidic pH can modify the properties of repair cements. In this study, volumetric change and solubility of the ready-to-use bioceramic repair cement Bio-C Repair (BCR, Angelus, Londrina, PR, Brazil) were evaluated after immersion in phosphate-buffered saline (PBS) (pH 7.0) or butyric acid (pH 4.5). Solubility was determined by the difference in initial and final mass using polyethylene tubes measuring 4 mm high and 6.70 mm in internal diameter that were filled with BCR and immersed in 7.5 mL of PBS or butyric acid for 7 days. The volumetric change was established by using bovine dentin tubes measuring 4 mm long with an internal diameter of 1.5 mm. The dentin tubes were filled with BCR at 37°C for 24 hours. Scanning was performed with micro-computed tomography (micro-CT; SkyScan 1176, Bruker, Kontich, Belgium) with a voxel size of 8.74 µm. Then, the specimens were immersed in 1.5 mL of PBS or butyric acid at and 37 °C for 7 days. After this period, a new micro-CT scan was performed. Bio-C Repair showed greater mass loss after immersion in butyric acid when compared with immersion in PBS (p<0.05). Bio-C Repair showed volumetric loss after immersion in butyric acid and increase in volume after immersion in PBS (p<0.05). The acidic pH influenced the solubility and dimensional stability of the Bio-C Repair bioceramic cement, promoting a higher percentage of solubility and decrease in volumetric values.

Dentine Remineralisation Induced by "Bioactive" Materials through Mineral Deposition: An In Vitro Study

This study aimed to assess the ability of modern resin-based "bioactive" materials (RBMs) to induce dentine remineralisation via mineral deposition and compare the results to those obtained with calcium silicate cements (CSMs). The following materials were employed for restoration of dentine cavities: CSMs: ProRoot MTA (Dentsply Sirona), MTA Angelus (Angelus), Biodentine (Septodont), and TheraCal LC (Bisco); RBMs: ACTIVA BioACTIVE Base/Liner (Pulpdent), ACTIVA Presto (Pulpdent), and Predicta Bioactive Bulk (Parkell). The evaluation of the mineral deposition was performed through scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) on the material and dentine surfaces, as well as at the dentine-material interface after immersion in simulated body fluid. Additionally, the Ca/P ratios were also calculated in all the tested groups. The specimens were analysed after setting (baseline) and at 24 h, 7, 14, and 28 days. ProRoot MTA, MTA Angelus, Biodentine, and TheraCal LC showed significant surface precipitation, which filled the gap between the material and the dentine. Conversely, the three RBMs showed only a slight ability to induce mineral precipitation, although none of them was able to remineralise the dentine-material interface. In conclusion, in terms of mineral precipitation, modern "bioactive" RBMs are not as effective as CSMs in inducing dentine remineralisation; these latter represent the only option to induce a possible reparative process at the dentin-material interface.

Regenerative potential of a novel aloe vera modified tricalcium silicate cement as a pulp capping material: An animal study

This study compared the histologic response of a pulp capping material Matreva MTA modified with different concentrations of aloe vera (AV) solutions to Biodentine cement. Ninety dogs' teeth were included and categorized according to the capping material into five groups (18 teeth each); Group I (Biodentine), group II (Matreva MTA), group III (Matreva MTA 10% AV), group IV (Matreva MTA 20% AV) and group V (Matreva MTA 30% AV). The histopathological findings were recorded at 2, 4, and 8 weeks. Matreva MTA and Biodentine groups showed the highest inflammatory cell count compared to the AV-modified Matreva MTA groups at 2- and 4-week intervals (p>0.05). Moreover, the AV-modified Matreva MTA and Biodentine groups showed higher dentin bridge thickness compared to unmodified Matreva MTA at different follow-up periods (p<0.05). AV can significantly enhance the in vivo bioactivity of Matreva MTA, inducing mild inflammation and good dentine bridge formation comparable to Biodentine.

Emerging Paradigms in Internal Root Resorption Management: Harnessing the Power of Bioceramics

Internal root resorption is a pathological activity involving dentin deterioration within the root canal walls. Numerous variables, including traumatic injury, infection, and orthodontic therapy, can trigger this process. Traditional materials such as mineral trioxide aggregate (MTA) have been utilized to treat internal root resorption but have limitations such as tooth discoloration and handling challenges. Bioceramic materials, such as Bio-C Repair, have emerged as possible MTA substitutes. This case study outlines the effective management of idiopathic extensive perforating internal root resorption using a non-surgical laser-assisted approach and the application of Bio-C Repair as an obturation material. The treatment resulted in the resolution of symptoms and the restoration of periapical tissues. Bioceramics, with their unique composition and favorable biological properties, offer the potential for effective tissue repair and provide alternatives to traditional materials in the treatment of internal resorption. The utilization of bioceramics, including Bio-C Repair, holds promise for achieving successful outcomes and preserving natural dentition.

Efficacy of Chitosan Scaffolded Calcium Silicate-based Cements for Treating Internal Resorption Defects with Perforation: In Vitro Study

AIM

The present study aimed to evaluate the efficacy of chitosan scaffold combined with calcium silicate cements in the management of internal resorption with perforation.

MATERIALS AND METHODS

Internal resorption cavities were simulated in 20 human permanent maxillary incisors that were then divided into two groups: group I - biodentine and group II - chitosan scaffold combined with biodentine. The samples were evaluated for the mineralization activity at the end of the 7th day and 14th day using scanning electron microscopy-energy dispersive X-ray (SEM-EDX) analysis. The data were recorded, tabulated, and then statistically analyzed.

RESULTS

From the SEM-EDX analysis, the mean score of calcium and phosphorus ion uptake by the material was obtained. Statistical analysis by nonparametric Mann-Whitney test showed that there was statistically significant difference in calcium ion uptake at the end of the 7th day (p = 0.016) and at the end of 14th day (p = 0.043) between the group biodentine and group chitosan scaffold combined with biodentine (p < 0.05).

CONCLUSION

In this present study, the use of chitosan scaffolds combined with biodentine showed a statistically significant difference in the mineralization activity when compared with pure biodentine. These scaffolded biomaterials exhibited greater potential for mineralization in vitro which can be efficiently used for the management of teeth with internal resorption with perforation. Further clinical trials are required for the understanding of their behavior in real-world scenarios.

CLINICAL SIGNIFICANCE

Calcium silicate cements have often exhibited defective hard tissue barrier formation and hence there is a pressing need to search for newer biomaterials that can overcome these shortcomings. Scaffolded biomaterials provide a controlled microcellular environment for bioactivity, and they were found to be efficient in the remineralization of tooth structure. The present study findings indicate that these chitosan scaffolds can be efficiently used in combination with calcium silicate cements for the management of internal resorption with perforation to enhance the treatment outcome.

Effects of different calcium-silicate based materials on fracture resistance of immature permanent teeth with replacement root resorption and osteoclastogenesis

Objectives

This study evaluated the effects of Biodentine (BD), Bio-C Repair (BCR), and mineral trioxide aggregate (MTA) plug on the fracture resistance of simulated immature teeth with replacement root resorption (RRR) and in vitro-induced osteoclastogenesis.

Materials and Methods

Sixty bovine incisors simulating immature teeth and RRR were divided into 5 groups: BD and BCR groups, with samples completely filled with the respective materials; MTA group, which utilized a 3-mm apical MTA plug; RRR group, which received no root canal filling; and normal periodontal ligament (PL) group, which had no RRR and no root canal filling. All the teeth underwent cycling loading, and compression strength testing was performed using a universal testing machine. RAW 264.7 macrophages were treated with 1:16 extracts of BD, BCR, and MTA containing receptor activator of nuclear factor-kappa B ligand (RANKL) for 5 days. RANKL-induced osteoclast differentiation was assessed by staining with tartrate-resistant acid phosphatase. The fracture load and osteoclast number were analyzed using 1-way ANOVA and Tukey's test (α = 0.05).

Results

No significant difference in fracture resistance was observed among the groups (p > 0.05). All materials similarly inhibited osteoclastogenesis (p > 0.05), except for BCR, which led to a lower percentage of osteoclasts than did MTA (p < 0.0001).

Conclusions

The treatment options for non-vital immature teeth with RRR did not strengthen the teeth and promoted a similar resistance to fractures in all cases. BD, MTA, and BCR showed inhibitory effects on osteoclast differentiation, with BCR yielding improved results compared to the other materials.

Regeneration of dentin-pulp complex: Effect of calcium-based materials on hDPSCs differentiation and gene expression

OBJECTIVE

Dentin-pulp complex is object of interest in the regenerative endodontic field as well as the natural function of human dental pulp stem cells (hDPSCs) that may differentiate into specific cells able to repair and/or regenerate both hard and soft dental structures. The aim of the present study was to evaluate the capacity of hDPSCs to differentiate in odontoblastic-like cells by evaluating the expression of specific odontogenic-related genes and to prove the ability of treatment with calcium-based materials such as calcium carbonate (CaCO3), calcium hydroxide (Ca(OH)₂), and mineral trioxide aggregate (MTA).

METHODS

hDPSCs were obtained and isolated from a third molar of a young patient. Odontogenic-related gene expression was assessed unti1 28 days of culture as well as alkaline phosphatase activity (ALP). hDPSCs were cultured in odontoblastic-induction medium used as control, and in presence of different concentrations of CaCO_3, Ca(OH)₂, and MTA.

RESULTS

The results demonstrated an upregulation in odontoblastic cell-related genes, in particular of the early differentiation marker known as matrix extracellular phosphoglycoprotein (MEPE), as well as increased ALP activity and the presence of calcium deposits, mainly by stimulation with calcium derivatives. In this regard, treatment of pulp tissue with CaCO₃, Ca(OH)₂ and even better with MTA seemed to be effective for dentinogenesis.

SIGNIFICANCE

The ease of isolation of hDPSCs from discarded or extracted teeth offers a promising source of autologous cells that may be applied for regenerative purpose in combination with selected bioactive materials. However, further investigations should be conducted to confirm the obtained results.

Cytotoxicity and genotoxicity of Bio-C Repair, Endosequence BC Root Repair, MTA Angelus and MTA Repair HP

The aim was to evaluate in vitro cytotoxicity and genotoxicity of Bio-C Repair (BCR), compared to Endosequence BC Root Repair (ERRM), MTA Angelus (MTA-Ang), and MTA Repair HP (MTA-HP). MC3T3 osteoblastic cells were exposed to extracts of the repairing bioceramic cements. After 1, 3, and 7 days, cytotoxicity and genotoxicity were evaluated by MTT and Micronucleus tests, respectively. Cells not exposed to biomaterials were used as a negative control. Data were compared using ANOVA two-way, followed by the Tukey Test (α=5%). MTA-Ang and MTA-HP showed no difference in relation to control regarding cytotoxicity in any experimental times. BCR and ERRM reduced cell viability after 3 and 7 days (p<0.05); however, the reduction caused by BCR was less than that caused by ERRM. Considering the micronucleus formation, all biomaterials caused an increase after 3 and 7 days (p<0.05), being greater for the BCR and ERRM groups. It can be concluded that BCR is non-cytotoxic in osteoblastic cells, as well as MTA-Ang e MTA Repair HP. BCR and ERRM showed greater genotoxicity than others tested biomaterials.

Antimicrobial and cytotoxic properties of calcium-enriched mixture cement, Iranian propolis, and propolis with herbal extracts in primary dental pulp stem cells

Objectives

In this study, natural substances were introduced as primary dental pulp caps for use in pulp therapy, and the antimicrobial and cytotoxic properties of these substances were investigated.

Materials and Methods

In this in vitro study, the antimicrobial properties of calcium-enriched mixture (CEM) cement, propolis, and propolis individually combined with the extracts of several medicinal plants were investigated against Enterococcus faecalis, Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus. Then, the cytotoxicity of each substance or mixture against pulp stem cells extracted from 30 primary healthy teeth was evaluated at 4 concentrations. Data were gathered via observation, and optical density values were obtained using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) test and recorded. SPSS software version 23 was used to analyze the data. Data were evaluated using 2-way analysis of variance and the Tukey test.

Results

Regarding antimicrobial properties, thyme alone and thyme + propolis had the lowest minimum inhibitory concentrations (MICs) against the growth of S. aureus, E. coli, and P. aeruginosa bacteria. For E. faecalis, thyme + propolis had the lowest MIC, followed by thyme alone. At 24 and 72 hours, thyme + propolis, CEM cement, and propolis had the greatest bioviability in the primary dental pulp stem cells, and lavender + propolis had the lowest bioviability.

Conclusions

Of the studied materials, thyme + propolis showed the best results in the measures of practical performance as a dental pulp cap.

Biocompatibility and bioactive potential of an experimental tricalcium silicate-based cement in comparison with Bio-C repair and MTA Repair HP materials

AIM

To evaluate the tissue reaction of a tricalcium silicate-based repair material associated with 30% calcium tungstate (TCS + CaWO₄ ) in comparison to Bio-C Repair (Bio-C; Angelus) and to MTA Repair HP (MTA HP; Angelus).

METHODOLOGY

Polyethylene tubes filled with one of the materials or left empty (control group, CG) were implanted into the subcutaneous tissues of rats for 7, 15, 30 and 60 days (n = 32/group). The capsule thickness, number of inflammatory cells, collagen content, interleukin-6 (IL-6), osteocalcin (OCN), von Kossa reaction and analysis under polarized light were evaluated. The data were subjected to generalized linear models for repeated measures, except the OCN. OCN data were submitted to Kruskal-Wallis and Dunn's post hoc test and Friedman followed by Nemenyi's test at significance level of 5%.

RESULTS

At all time points, significant differences in the number of inflammatory cells were not observed between TCS + CaWO₄ and Bio-C, whereas, at 15, 30 and 60 days, no significant difference was detected between TCS + CaWO₄ and MTA HP. At all periods, significant differences were not detected in the number of fibroblasts in TCS + CaWO₄ versus MTA HP, and, at 60 days, no significant difference was demonstrated between these groups and CG. Significant differences in the immunoexpression of IL-6 were not detected amongst bioceramic materials at all periods. From 7 to 60 days, significant reduction in the number of inflammatory cells, number of IL-6-immunopositive cells and in the capsule thickness was accompanied by significant increase in the collagen in all groups. OCN-immunolabelled cells, von Kossa-positive structures and amorphous calcite deposits were observed around all materials, whereas, in the CG, these structures were not seen.

CONCLUSIONS

These findings indicate that the experimental material (TCS + CaWO₄ ) is biocompatible and has a bioactive potential, similar to the MTA HP and Bio-C Repair, and suggest its use as a root repair material.

The Cytotoxicity and Genotoxicity of Bioactive Dental Materials

The promotion of biologically based treatment strategies in restorative dentistry is of paramount importance, as invasive treatments should be avoided to maintain the tooth's vitality. This study aimed to assess the biocompatibility of commercially available bioactive materials that can be used for dental pulp capping. The study was performed with a monocyte/macrophage peripheral blood SC cell line (ATCC CRL-9855) on the following six specific bioactive materials: ProRoot MTA (Dentsply Sirona), MTA Angelus (Angelus), Biodentine (Septodont), TheraCal LC (Bisco), ACTIVA BioACTIVE (Pulpdent) and Predicta Bioactive Bulk (Parkell). The cytotoxicity of the investigated agents was measured using a resazurin-based cell viability assay, while the genotoxicity was evaluated using an alkaline comet assay. Additionally, flow cytometry (FC) apoptosis detection was conducted with a FITC (fluorescein isothiocyanate) Annexin V Apoptosis Detection Kit I. FC cell-cycle arrest assessment was carried out with propidium iodide staining. The results of this study showed no significant cytotoxicity and genotoxicity (p > 0.05) in ProRoot MTA, MTA Angelus, Biodentine, ACTIVA BioACTIVE and Predicta Bioactive. Conversely, TheraCal LC presented a significant decrease (p < 0.001). In conclusion, due to excellent biocompatibility and low cytotoxicity, MTA, Biodentine, ACTIVA BioACTIVE and Predicta Bioactive may be suitable for pulp capping treatments. On the other hand, due to the high cytotoxicity of TheraCal LC, its use should be avoided in vital pulp therapies.

An in vitro evaluation of antimicrobial activity of a fast-setting endodontic material

The aim of this study is to evaluate the antimicrobial activity of the fast-setting iRoot Fast Set Root Repair Material (iRoot FS), Mineral trioxide aggregate (MTA) and Biodentine. The materials were freshly mixed or set for 1 and 7 days to conduct the agar diffusion test, direct contact test and carry-over effect test against E. faecalis and P. gingivalis, and the pH values were also measured. The data were analyzed by an analysis of variance and one-way ANOVA or Dunnett's T3 test, and the Tukey's post hoc test for multiple comparisons (α = 0.05). In the direct contact test, all three materials showed good antibacterial activity after setting for 20 min. The antibacterial properties of the three materials decreased with the increase of setting time (p < 0.05). The suspension of all the three materials showed high pH values (11-12) and no significant difference was observed (p > 0.05). With the extension of setting time, the pH of iRoot FS and Biodentine slightly decreased (p < 0.05). Fresh iRoot FS, Biodentine, and MTA killed E. faecalis and P. gingivalis effectively, but their antimicrobial effect decreased after 24 h, and distinctly decreased after 7 days after mixing. iRoot FS, Biodentine, and MTA showed a tendency of alkalinity during this 7-day experiment.

Vital Pulp Therapy of Permanent Teeth with Reversible or Irreversible Pulpitis: An Overview of the Literature

Vital pulp therapy (VPT) has been recently proposed as an alternative approach even in symptomatic mature permanent teeth with deep caries’ lesions, aiming to maintain the pulp vitality over time and/or to avoid non-surgical root canal therapy (NSRCT). However, to date, the diagnosis of reversible or irreversible pulpitis is only based on clinical pain quantity and quality, without precisely reflecting the pulp inflammation status. Therefore, the aim of the present study was to provide an overview based on the current scientific literature to demonstrate the clinical effectiveness of VPT on mature permanent teeth, validating the use of hydraulic calcium silicate-based cements and their role in pain management. VPT may be successfully applied not only in mature permanent teeth diagnosed with reversible pulpitis, but also in permanent dental elements with signs and symptoms of irreversible pulpitis. Hydraulic cements showed favorable outcomes in terms of decrease of pro-inflammatory mediators and of post-operative pain. Pain plays a central role in the chance to perform VPT in mature permanent teeth, since it may be considered as a pre-operative diagnostic criterion as well as a treatment success parameter. In addition, proper assessment of pulp inflammation and choice of appropriate materials are key factors in enhancing VPT success.

Morphological and Chemical Analysis of Different Types of Calcium Silicate-Based Cements

Objectives. Particle size and shape can influence the properties of materials. However, to improve the physicochemical and biological properties of mineral trioxide aggregate (MTA), silicate-based hydraulic cements were introduced. This study aimed to evaluate and compare the major constituents and crystalline structures along with the surface morphology of different types of calcium silicate-based cement (CSC). Materials and Methods. Six different types of CSC (white Portland cement, white ProRoot MTA, white MTA Angelus, Biodentine, and Endosequence, both putty and paste) were used in this study. Five samples of each material were analyzed in both uncured and cured cement using scanning electron microscopy/energy-dispersive X-ray (SEM/EDX), X-ray diffraction (XRD), and Fourier transform-infrared spectroscopy (FTIR). Results. SEM analysis showed that the surfaces of all materials consisted of particle sizes ranging from 0.194 μm to approximately 51.82 μm. The basic elements found in both uncured and cured cement of all tested materials using EDX were carbon, calcium, silicon, and oxygen. A difference was observed in the presence or absence of magnesium, aluminum, bismuth, zirconium, and tantalum. XRD showed that all tested materials were composed mainly of tricalcium silicate and dicalcium silicate, which are the main components of Portland cement. FTIR analysis showed aromatic rings, phosphine PH, alkyl halides, and alcohol O-H groups in all tested materials but at different wavenumbers. Conclusions. The different types of CSCs tested in this study were primarily modified types of Portland cement with the addition of radiopacifiers. ProRoot MTA and MTA Angelus contained bismuth oxide, Biodentine contains zirconium oxide, whereas Endosequence root repair materials (both putty and paste) contained zirconium oxide and tantalum oxide. Endosequence root repair materials showed smaller particle sizes than the other groups. White PC had the most irregular and large particle sizes. CSC had a smaller particle size, except for MTA Angelus. Clinical Relevance. The composition of CSC has a direct influence on the properties of these cements, which may affect the clinical outcome of the treatment.

Biological parameters, discolouration and radiopacity of calcium silicate-based materials in a simulated model of partial pulpotomy

AIM

To analyse the discolouration, radiopacity, pH and calcium ion release of Biodentine (BD), Bio-C repair (BCR) and Bio-C temp (BCT), as well as their biological effects on human dental pulp cells (hDPCs).

METHODOLOGY

Sixty-four extracted bovine incisors were prepared to simulate crown fractures with pulp exposure and open root apex. The roots were filled using a mixture of agar and blood (control), and BD, BCR or BCT were placed over this mixture. Colour assessment analyses of the samples were performed before and immediately after material insertion and repeated at 30 and 90 days, using a spectrophotometer. The colour change of each specimen was evaluated at the crown and calculated based on the CIELab colour space. Digital radiographs were acquired for radiopacity analysis. hDPCs were placed in contact with different dilutions of culture media previously exposed to such materials and tested for cell viability using the MTT assay. The pH and calcium ion release of all materials were measured after 24 h; the data were assessed using one-way analysis of variance (ANOVA). Cell viability was analysed by two-way ANOVA. Differences in colour parameters and wound-healing data were assessed by two-way repeated measures ANOVA (α = 0.05). Tukey's and Dunnett's tests were used to compare the experimental groups with the control group.

RESULTS

BCR had grater radiopacity and smaller colour alteration (ΔEab/ΔE00) than the other materials tested (p < .005; p < .001). No significant differences in pH were found amongst the tested materials (p > .05). BCT was associated with the largest release of calcium ions (p < .0001). BD had cell viability similar to that of the control at the lowest dilutions, and BCR was similar to that of the control, regardless of the dilution tested (p > .05). BCT had a lower percentage of viability than that of the control at all tested dilutions (p < .0001). Cell migration rates in BD and BCR were similar to those in the control group after 24 h and 48 h (p > .05), whilst BCT had larger voids than the control in both periods (p < .0001).

CONCLUSIONS

BCR, BCT and BD were associated with tooth discolouration. BCR had the lowest staining values, the highest radiopacity and viability greater than 80% hDPCs.

Biomineralization potential and biological properties of a new tantalum oxide (Ta2O5)-containing calcium silicate cement

Objective

The present study evaluated the biological effects and biomineralization potential of a new tantalum oxide (Ta₂O₅)–containing material designed for vital pulp therapy or perforation repair (NeoMTA 2), compared to NeoMTA Plus and Bio-C Repair.

Material and methods

Human dental pulp stem cells (hDPSCs) were exposed to different eluates from NeoMTA Plus, NeoMTA 2, and Bio-C Repair. Ion release from each material was determined using inductively coupled plasma-optical emission spectrometry (ICP-MS). The biological experiments performed were MTT assays, apoptosis/necrosis assays, adhesion assays, migration assays, morphology evaluation, and reactive oxygen species (ROS) production analysis. Biomineralization was assessed by Alizarin red S staining. Finally, osteo/odontogenic gene expression was determined by real-time quantitative reverse-transcriptase polymerase chain reaction (RT-qPCR). Data were analyzed using one-way ANOVA followed by Tukey’s multiple comparison test.

Results

NeoMTA 2 displayed a significantly higher calcium release compared to the other materials (p < 0.05). When hDPSCs were cultured in presence of the different material eluates, all groups exhibited similar hDPSC viability and migration rates when compared to untreated cells. Substantial cell attachment and spreading were observed in all materials’ surfaces, without significant differences. hDPSCs treated with NeoMTA 2 displayed an upregulation of ALP, Col1A1, RUNX2 (p < 0.001), ON, and DSPP genes (p < 0.05), and showed the highest mineralization potential compared to other groups (p < 0.001). Finally, the more concentrated eluates from these materials, specially NeoMTA Plus and NeoMTA 2, promoted higher ROS production in hDPSCs compared to Bio-C Repair and control cells (p < 0.001), although these ROS levels did not result in increased cell death.

Conclusions

The new tantalum oxide (Ta₂O₅)–containing material shows an adequate cytocompatibility and the ability to promote biomineralization without using chemical osteogenic inducers, showing great potential as a new material for vital pulp therapy.

Clinical relevance

NeoMTA 2 seems to be a promising material for vital pulp therapy. Further studies considering its biocompatibility and biomineralization potential are necessary.

Biocompatibility and Antibiofilm Properties of Calcium Silicate-Based Cements: An In Vitro Evaluation and Report of Two Clinical Cases

Simple Summary

Calcium silicate-based cements are successfully applied in the different fields of endodontics and vital pulp therapy. To better assess the properties of these bioactive materials, the present in vitro and in vivo study aimed to compare the biocompatibility and antibiofilm properties of ProRoot MTA and Biodentine. Human osteogenic sarcoma (Saos-2) cells were cultured in the presence of both materials and evaluated. Moreover, the bioactive cements were in vivo applied to perform vital pulp therapy on immature permanent teeth affected by reversible pulpitis. Saos-2 cells’ viability was slightly greater in the presence of ProRootMTA than Biodentine and cells would grow in a better way on ProRootMTA disks than on Biodentine ones. Moreover, ProRootMTA showed a powerful antibiofilm effect towards Streptococcus mutans. The in vitro results were clinically supported by a 100% success rate after 2 years of follow-up.

Abstract

Calcium silicate-based cements have reached excellent levels of performance in endodontics, providing predictable and successful results. To better assess the properties of these bioactive materials, the present study aimed to compare the biocompatibility and antibiofilm properties of ProRoot MTA and Biodentine. Human osteogenic sarcoma (Saos-2) cells were cultured on ProRoot MTA and Biodentine samples or in the presence of both cement extracts. Cell viability assay, measurement of reactive oxygen species (ROS), immunofluorescence analysis, as well as morphological evaluations were conducted. Moreover, Streptococcus mutans was used to assess the biofilm forming ability on ProRoot MTA and Biodentine disks. Finally, both cements were applied in vivo to treat immature permanent teeth affected by reversible pulpitis. Results: Cell viability assay demonstrated that Saos-2 cells had a dose- and time-dependent cytotoxicity to both analyzed cements, although cells exposed to ProRoot MTA showed a better cell vitality than those exposed to Biodentine (p < 0.001). Both cements demonstrated ROS production while this was greater in the case of Biodentine than ProRoot MTA (p < 0.001). Immunofluorescence images of the cytoskeleton and focal adhesions showed no differences in Saos-2 cells grown in the presence of ProRoot MTA eluate; whereas in the Biodentine groups, cells showed a morphology and focal adhesions more similar to that of the control sample, as the eluate concentration decreased. Morphological analysis revealed that Saos-2 cells were more flattened and exhibited better spreading when attached to ProRoot MTA disks than to Biodentine ones. The antibiofilm properties showed a time-dependent powerful inhibition of S. mutans superficial colonization and an antibiofilm effect of both cements. Clinically, complete root formation of the treated elements was achieved using the two studied cements, showing stable results over time. ProRoot MTA and Biodentine was demonstrated to be biocompatible and to possess antibiofilm properties. Their clinical application in vital pulp therapy provided successful outcomes after 2 years of follow-up.

Bio-C Repair - A New Bioceramic Material for Root Perforation Management: Two Case Reports

These case reports aimed to describe the management of lateral perforation in the middle cervical third of the root in two maxillary incisors with pulp canal calcification using Bio-C Repair, with safe and viable clinical treatment strategies. Digital radiographic exams were obtained with different angles and analyzed using different filters. Cone-beam computed tomography (CBCT) images were requested to show the actual position of the canal, location of the perforation, and guide the strategic planning of the case. Subsequently, cavity access was prepared with the aid of dental operating microscopy. After perforation was identified, granulation tissue was removed and the original canal was identified and then dressed with calcium hydroxide. In the second visit, the perforation was filled with Bio-C Repair and the canal system filled with gutta-percha points and a root canal sealer (Bio-C Sealer). The teeth were restored with glass fiber post, 4 mm beyond the perforation level, and provisory crowns. Both teeth treated as described above were functional and asymptomatic with a 1-year clinical and radiographic assessment. The Bio-C Repair is suggested as a new cement option for the management of lateral canal perforations, with effective results as observed after a one-year follow-up.

Do intracanal medications used in regenerative endodontics affect the bond strength of powder-to-liquid and ready-to-use cervical sealing materials?

Aim:

This study evaluated the effect of four intracanal medications commonly used in regenerative endodontic procedures on the bond strength of four calcium silicate-based materials, in which two are powder-to-liquid products (MTA and MTA-HP) and the other are ready-to-use materials (EndoSequence Root Repair Material Fast Set Putty [ERRM] and Bioceramic Repair [BIO-C Repair]).

Methods:

Ten bovine central incisors were selected and 4 slices (1.0 ± 0.1 mm) were prepared from each root. Next, four 0.8-mm wide holes were drilled in each slice and specimens were filled with one of the following intracanal medications: triple antibiotic paste, double antibiotic paste, calcium hydroxide with distilled water, and calcium hydroxide with 2% chlorhexidine gel. After 21 days, holes were filled with one of the materials: MTA, MTA-HP, ERRM, or BIO-C Repair. After storage, push-out test and failure analysis were performed. Data were submitted to analysis of variance in a 4 × 4 factorial scheme. Tukey's test was used for multiple comparisons.

Results:

The use of different interappointment dressings did not influence the results (P > 0.05). ERRM and BIO-C Repair presented significantly higher values than MTA and MTA-HP (P < 0.0001). Specimens showed a 100% occurrence of adhesive failures.

Conclusion:

The use of different intracanal medications presented similar impact on bond strength of calcium silicate-based materials. Ready-to-use ERRM and BIO-C Repair materials presented the best push-out values to dentine, whereas powder-to-liquid MTA and MTA-HP cements showed the lowest results.

Cytocompatibility and Bioactive Properties of Hydraulic Calcium Silicate-Based Cements (HCSCs) on Stem Cells from Human Exfoliated Deciduous Teeth (SHEDs): A Systematic Review of In Vitro Studies

The implementation of hydraulic calcium silicate-based endodontic cements (HCSCs) in biologically based endodontic procedures for the primary dentition has been recently investigated, focusing on the biological response of stem cells from human exfoliated deciduous teeth (SHEDs) towards them. The present systematic review aimed to present a qualitative synthesis of the available literature consisting of in vitro assays, which assessed the cytocompatibility and bioactive properties of HCSCs in direct contact with SHEDs. Following the PRISMA statement, an electronic database search was carried out in Medline, Scopus, Embase, Web of Science, and SciELO on March 31st and updated on November 16th, 2020. In vitro studies evaluating the biological response of SHEDs to the treatment with HCSCs were eligible. Within the term biological response, assays assessing the cytocompatibility (i.e., cell viability, migration, proliferation), cell plasticity or differentiation (i.e., osteo/odontogenic marker expression), and bioactivity or biomineralization (i.e., mineralized nodule formation) were included. A total of seven studies were included after the selection process. The study sample comprised an extensive range of cell viability, migration, proliferation, adhesion, and bioactivity assays regarding the biological response of SHEDs towards five different commercially available HCSCs (MTA, ProRoot MTA, Biodentine, iRoot BP Plus, and Theracal LC). Biodentine, MTA, and iRoot BP Plus showed significant positive results in cytocompatibility and bioactivity assays when cultured with SHEDs. The results from in vitro assays assessing the cytocompatibility and bioactivity of the HCSCs MTA, Biodentine, and iRoot BP Plus towards SHEDs support their use in vital pulp treatment for the primary dentition.