Biocompatibility and Bioactivity of Set Direct Pulp Capping Materials on Human Dental Pulp Stem Cells

"Biological responses of two calcium-silicate-based cements on a tissue-engineered 3D organotypic deciduous pulp analogue"

OBJECTIVES

The biological responses of MTA and Biodentine™ has been assessed on a three-dimensional, tissue-engineered organotypic deciduous pulp analogue.

METHODS

Human endothelial (HUVEC) and dental mesenchymal stem cells (SHED) at a ratio of 3:1, were incorporated into a collagen I/fibrin hydrogel; succeeding Biodentine™ and MTA cylindrical specimens were placed in direct contact with the pulp analogue 48 h later. Cell viability/proliferation and morphology were evaluated through live/dead staining, MTT assay and Scanning Electron Microscopy (SEM), and expression of angiogenic, odontogenic markers through real time PCR.

RESULTS

Viable cells dominated at day 3 after treatment presenting typical morphology, firmly attached within the hydrogel structures, as shown by live/dead staining and SEM images. MTT assay at day 1 presented a significant increase of cell proliferation in Biodentine™ group. Real-time PCR showed significant upregulation of odontogenic markers DSPP, BMP-2 (day 3,6), RUNX2, ALP (day 3) in contact with Biodentine™ compared to MTA and the control, whereas MTA promoted significant upregulation of DSPP, BMP-2, RUNX2, Osterix (day 3) and ALP (day 6) compared to the control. MSX1 presented downregulation in both experimental groups. Expression of angiogenic markers VEGFa and ANGPT-1 at day 3 was significantly upregulated in contact with Biodentine™ and MTA respectively, while the receptors VEGFR1, VEGFR2 and Tie-2, as well as PECAM-1 were downregulated.

SIGNIFICANCE

Both calcium silicate-based materials are biocompatible and exert positive angiogenic and odontogenic effects, although Biodentine™ during the first days of culture, seems to induce higher cell proliferation and provoke a more profound odontogenic and angiogenic response from SHED.

Antibacterial, biocompatible, and mineralization-inducing properties of calcium silicate-based cements

BACKGROUND

Different pulp capping materials have different origins and compositions, require different preparations, and may vary in their bioactive properties.

AIM

The purpose of this study was to evaluate the antibacterial activity, biocompatibility, and mineralization-inducing potential of calcium silicate-based pulp capping materials.

DESIGN

Six contemporary calcium silicate-based cements, ProRoot MTA, MTA Angelus, Biodentine, EndoSequence, NeoMTA 2, and NeoPutty, were evaluated. The antibacterial effects of these materials against Streptococcus mutans UA159 and Enterococcus faecalis ATCC 29212 were determined by the agar diffusion assay and the direct culture test. The biocompatibility and mineralization-inducing potential of these materials in preodontoblastic 17IIA11 cells were evaluated by the MTT assay and by Alizarin Red S staining, respectively.

RESULTS AND CONCLUSION

In agar diffusion test, only Biodentine showed distinct antibacterial effects against S. mutans. All the tested materials, however, showed antibacterial effects against S. mutans and E. faecalis in the direct culture test, with Biodentine showing the strongest growth inhibition against both S. mutans and E. faecalis. All the tested materials showed acceptable biocompatibility and mineralization-supporting potential in our experimental conditions. In summary, ProRoot MTA, MTA Angelus, Biodentine, EndoSequence, NeoMTA 2, and NeoPutty demonstrated acceptable in vitro antimicrobial, biocompatible, and mineralization-supporting properties.

MicroRNA-93-5p regulates odontogenic differentiation and dentin formation via KDM6B

BACKGROUND

Epigenetic factors influence the odontogenic differentiation of dental pulp stem cells and play indispensable roles during tooth development. Some microRNAs can epigenetically regulate other epigenetic factors like DNA methyltransferases and histone modification enzymes, functioning as epigenetic-microRNAs. In our previous study, microarray analysis suggested microRNA-93-5p (miR-93-5p) was differentially expressed during the bell stage in human tooth germ. Prediction tools indicated that miR-93-5p may target lysine-specific demethylase 6B (KDM6B). Therefore, we explored the role of miR-93-5p as an epi-miRNA in tooth development and further investigated the underlying mechanisms of miR-93-5p in regulating odontogenic differentiation and dentin formation.

METHODS

The expression pattern of miR-93-5p and KDM6B of dental pulp stem cells (DPSCs) was examined during tooth development and odontogenic differentiation. Dual luciferase reporter and ChIP-qPCR assay were used to validate the target and downstream regulatory genes of miR-93-5p in human DPSCs (hDPSCs). Histological analyses and qPCR assays were conducted for investigating the effects of miR-93-5p mimic and inhibitor on odontogenic differentiation of hDPSCs. A pulpotomy rat model was further established, microCT and histological analyses were performed to explore the effects of KDM6B-overexpression and miR-93-5p inhibition on the formation of tertiary dentin.

RESULTS

The expression level of miR-93-5p decreased as odontoblast differentiated, in parallel with elevated expression of histone demethylase KDM6B. In hDPSCs, miR-93-5p overexpression inhibited the odontogenic differentiation and vice versa. MiR-93-5p targeted 3' untranslated region (UTR) of KDM6B, thereby inhibiting its protein translation. Furthermore, KDM6B bound the promoter region of BMP2 to demethylate H3K27me3 marks and thus upregulated BMP2 transcription. In the rat pulpotomy model, KDM6B-overexpression or miR-93-5p inhibition suppressed H3K27me3 level in DPSCs and consequently promoted the formation of tertiary dentin.

CONCLUSIONS

MiR-93-5p targets epigenetic regulator KDM6B and regulates H3K27me3 marks on BMP2 promoters, thus modulating the odontogenic differentiation of DPSCs and dentin formation.

Evaluation of cytotoxicity and antibacterial activity of different pulp capping liners

This study compares the cytotoxicity and antibacterial activity of five pulp capping liners. This in vitro study was conducted on Fuji II LC glass ionomer, Dycal, Calcimol LC, TheraCal LC, and ACTIVA BioACTIVE. For cytotoxicity, the (MTT) methyl thiazolyl tetrazolium assay was performed on 3 samples from each group of human dental pulp cells (HDPSCs) after 24 h of incubation. The direct contact test (DCT) for antibacterial activity, 6 samples (3 for each material, and 3 for negative control), from each liner were made to evaluate Streptococcus mutans (S. mutans), Lactobacillus casei (L. casei), and Lactobacillus acidophilus (L. acidophilus). Data were analyzed by one-way ANOVA and Tukey's post-hoc test (alpha = 0.05). Data analysis showed that the cytotoxicity of the materials was significantly different (p < 0.001). Fuji II LC and ACTIVA BioACTIVE showed strong cytotoxicity, TheraCal LC moderate cytotoxicity, and Dycal and Calcimol LC slight cytotoxicity. The analysis also revealed a significant difference among the materials regarding antibacterial activity (p < 0.001). Tukey's test showed that the mean percentage of reduction in colony count was significant for all liners compared with the positive control (p < 0.001). The mean percentage of reduction in colony count for Dycal was significantly greater than that of Fuji II LC (p = 0.014), Calcimol LC (p = 0.003), and TheraCal LC (p = 0.001). ACTIVA BioACTIVE did not significantly differ from the other materials as regards antibacterial activity. Dycal showed significantly higher antibacterial activity than the other materials.

The Effect of Calcium hydroxide, Glass Ionomer and light cured resin modified calcium silicate on viability, proliferation and differentiation of stem cells from human exfoliated deciduous teeth

BACKGROUND

Vital pulp therapy, based on the use of stem cells, has promising research and therapeutic applications in dentistry. It is essential to understand the direct effect of capping materials on the dental pulp stem cells of primary teeth, which contribute to the healing powers of the tooth. The aim of this study is to evaluate the effect of different capping materials (Calcium Hydroxide (DyCal®) - Glass Ionomer (Fuji IX®) and light-cured resin modified calcium silicate (TheraCal LC®)) on the viability, proliferation, and differentiation of stem cells from human exfoliated deciduous teeth (SHEDs).

METHODS

SHEDs were isolated from extracted primary teeth, then divided into four groups and each of the capping materials were applied to the stem cells as follows: group I the controls, group II with Ca(OH)2, group III with the GIC, and group IV with the Theracal LC. For all groups assessment of viability and proliferation rate was done using the MTT cell proliferation assay. Also, Differentiation was evaluated by measuring the gene expression of Alkaline phosphatase enzyme activity (ALP) and Dentin matrix protein-1 (DMP1) through quantitative real-time PCR. Morphological assessment was conducted using Alizarin Red S staining. All evaluations were performed after 7 and 14 days of culture.

RESULTS

TheraCal LC showed the highest values of proliferation, which was significant only compared to the control group after 2 weeks (p = 0.012). After one week, TheraCal LC showed the highest significant values of ALP and DMP1 compared to all other groups (p < 0.001).

CONCLUSION

The three materials under study are biocompatible, maintain viability, and stimulate the proliferation and differentiation of SHEDs. However, TheraCal LC allows better proliferation of SHEDs than Dycal Ca(OH)2 and Fuji IX GIC.

Comparative Biocompatibility and Odonto-/Osteogenesis Effects of Hydraulic Calcium Silicate-Based Cements in Simulated Direct and Indirect Approaches for Regenerative Endodontic Treatments: A Systematic Review

BACKGROUND

Regenerative dentistry is the operation of restoring dental, oral and maxillofacial tissues. Currently, there are no guidelines for the ideal cement/material in regenerative endodontic treatments (RET). Hydraulic calcium silicate-based cements (hCSCs) are currently the material of choice for RET.

OBJECTIVES

This systematic review was conducted to gather all of the different direct and indirect approaches of using hCSCs in RET in vitro and in vivo, and to ascertain if there are any superiorities to indirect approaches.

METHODS AND MATERIALS

This systematic review was conducted according to the 2020 PRISMA guidelines. The study question according to the PICO format was as follows: Comparison of the biological behavior (O) of stem cells (P) exposed to hCSCs through direct and indirect methods (I) with untreated stem cells (C). An electronic search was executed in Scopus, Google Scholar, and PubMed.

RESULTS

A total of 78 studies were included. Studies were published between 2010 and 2022. Twenty-eight commercially available and eighteen modified hCSCs were used. Seven exposure methods (four direct and three indirect contacts) were assessed. ProRoot MTA and Biodentine were the most used hCSCs and had the most desirable results. hCSCs were either freshly mixed or set before application. Most studies allowed hCSCs to set in incubation for 24 h before application, which resulted in the most desirable biological outcomes. Freshly mixed hCSCs had the worst outcomes. Indirect methods had significantly better viability/proliferation and odonto-/osteogenesis outcomes.

CONCLUSION

Biodentine and ProRoot MTA used in indirect exposure methods result in desirable biological outcomes.

Impact of corticosteroid administration on the response of exposed dental pulp to capping with bioactive cements-experimental study on mongrel dogs

BACKGROUND

Corticosteroids are commonly used as a treatment for a variety of pathological conditions, however, systemic corticosteroid administration has adverse effects including impaired immune response and wound healing. Such complications may affect pulp healing after direct pulp capping. The current study evaluated the influence of corticosteroids on the healing ability of exposed dogs' dental pulps after direct pulp capping (DPC) with bioactive materials.

METHODS

Ten healthy male dogs were assigned randomly into two groups, 5 dogs each: group I represent the control group which did not receive any medication, and group II was given corticosteroid for 45 days before DPC and till the dogs were euthanized (n = 75 teeth for each group). Following mechanical exposure, the pulps were randomly capped with either Ca(OH)_2, MTA, or Biodentine. The pulpal tissues' reaction to the capping materials was evaluated 65 days postoperatively according to the following parameters: calcific bridge formation, pulpal inflammation, pulp necrosis, and bacterial infiltration.

RESULTS

The corticosteroid-treated group revealed no significant difference compared to the control group concerning the pulp healing response (P > 0.05). Both Biodentine and MTA-treated specimens revealed significant differences with Ca(OH)₂-treated specimens (P < 0.05) which displayed a superior positive effect of both MTA and Biodentine to Ca(OH)₂ regarding all the parameters.

CONCLUSIONS

Direct pulp capping technique whenever indicated in subjects treated with corticosteroid immunosuppressive drugs like prednisone performed well in aseptic conditions especially when capped with bioactive materials.

Fast-Setting Calcium Silicate-Based Pulp Capping Cements-Integrated Antibacterial, Irritation and Cytocompatibility Assessment

Calcium silicate-based cements (CSCs) are endodontic materials widely used in vital pulp-capping approaches. Concerning the clinical application, the reduced set time and pre-mixed formulations are relevant characteristics during the operative management of pulpal exposure, aiming to optimise the work time and improve cross-infection/asepsis control. Additionally, clinical success seems to be greatly dependent on the biological performance of the materials that directly contact the living pulp. As such, this work approaches an integrative biological characterisation (i.e., antibacterial, irritation, and cytocompatibility assays) of three fast-setting CSCs-Biodentine^TM, TotalFill^® BC RRM™ Fast Putty, and Theracal LC^®. These cements, after setting for 24 h, presented the expected topography and elemental composition (assessed by scanning electron microscopy, coupled with EDS analysis), in accordance with the information of the manufacturer. The set cements displayed a significant and similar antibiofilm activity against S. mutans, in a direct contact assay. Twenty-four-hour eluates were not irritant in the standardised CAM assay, but elicited distinct dose- and time-dependent cytotoxicity profiles on fibroblastic cells-i.e., Biodentine was devoid of toxicity, TotalFill presented a slight dose-dependent initial toxicity that was easily overcome, and Theracal LC was deleterious at high concentrations. When compared to long-setting ProRoot MTA cement, which highlighted the pursued integrative approach, Biodentine presented a similar profile, but TotalFill and Theracal LC displayed a poorer performance regarding antibiofilm activity/cytocompatibility features, and Theracal LC suggested eventual safety concerns.

LIGHT-CURED CALCIUM SILICATE BASED-CEMENTS AS PULP THERAPEUTIC AGENTS: A META-ANALYSIS OF CLINICAL STUDIES

OBJECTIVES

To determine the clinical performance of light-cured calcium silicate-based cement for direct or indirect pulp capping. The research question was as follows: in teeth with deep caries lesions, does the use of resin-modified calcium silicate-containing composites improve the radiological success and prevent irreversible pulpitis and pulpal necrosis compared with other pulp-capping agents?

MATERIALS AND METHODS

The following databases were screened until September 2021: PubMed, Web of Science, Scielo, Scopus, Embase, and The Cochrane Library. Randomized clinical trials reporting the clinical evaluation of a resin-modified calcium silicate material as an agent for pulp therapy were included. Meta-analysis was performed using the Rev Manager v5.4.1 software. The risk difference and 95% confidence interval of the dichotomous outcome (restoration failure or success) were calculated for comparison.

RESULTS

Ten studies were considered for qualitative analysis and meta-analysis. Studies evaluating the performance of light-cured calcium silicate-based cement from 1 month to a maximum follow-up period of 36 months and comparing it with the performance of CaOH, mineral trioxide aggregate, or Biodentine were included. In the global analysis for direct pulp capping at 6-month follow-up, no statistical differences were observed between the experimental group using the light-cured calcium silicate-based cement and control group (P = .28). However, at 12-month follow-up, global analysis favored the control group (P < .001). For indirect pulp capping, at 6- and 24-month follow-ups, no statistically significant differences were observed between the experimental and control groups (P = .88; P = .21).

CONCLUSIONS

Light-cured calcium silicate-based cement showed a limited clinical performance as a direct pulp capping agent, especially when evaluated in the long term. However, using it as an indirect pulp capping agent may be a reliable and easy-to-use option for restoring teeth with deep caries.

CLINICAL SIGNIFICANCE

This systematic review provides evidence that supports the use of light-cured calcium silicate-based cement as an indirect pulp capping agent.

The Cytotoxicity and Genotoxicity of Bioactive Dental Materials

The promotion of biologically based treatment strategies in restorative dentistry is of paramount importance, as invasive treatments should be avoided to maintain the tooth's vitality. This study aimed to assess the biocompatibility of commercially available bioactive materials that can be used for dental pulp capping. The study was performed with a monocyte/macrophage peripheral blood SC cell line (ATCC CRL-9855) on the following six specific bioactive materials: ProRoot MTA (Dentsply Sirona), MTA Angelus (Angelus), Biodentine (Septodont), TheraCal LC (Bisco), ACTIVA BioACTIVE (Pulpdent) and Predicta Bioactive Bulk (Parkell). The cytotoxicity of the investigated agents was measured using a resazurin-based cell viability assay, while the genotoxicity was evaluated using an alkaline comet assay. Additionally, flow cytometry (FC) apoptosis detection was conducted with a FITC (fluorescein isothiocyanate) Annexin V Apoptosis Detection Kit I. FC cell-cycle arrest assessment was carried out with propidium iodide staining. The results of this study showed no significant cytotoxicity and genotoxicity (p > 0.05) in ProRoot MTA, MTA Angelus, Biodentine, ACTIVA BioACTIVE and Predicta Bioactive. Conversely, TheraCal LC presented a significant decrease (p < 0.001). In conclusion, due to excellent biocompatibility and low cytotoxicity, MTA, Biodentine, ACTIVA BioACTIVE and Predicta Bioactive may be suitable for pulp capping treatments. On the other hand, due to the high cytotoxicity of TheraCal LC, its use should be avoided in vital pulp therapies.

Comparison of the Effects of TheraCal LC and Mineral Trioxide Aggregate on Direct Pulp Capping (DPC) Based on Histological Findings

Background: Direct pulp capping can conserve its vitality by placing materials that promote dentin bridge (DB) formation at the exposure site. This study aimed to determine whether TheraCal LC could produce a layer of reparative dentin. It also compared the histological differences between treatment with mineral trioxide aggregate (MTA) and TheraCal LC.

Material and methods: A sample of 20 maxillary and mandibular premolars, which had previously been indicated for extraction in orthodontic therapy, was taken from 10 patients and randomly divided into two halves, a TheraCal LC, and an MTA group. Pulpal exposure was achieved by similar class I preparations, which were restored with a resin-modified glass-ionomer and extracted after ten weeks, noting that these interventions have been performed on live teeth in the oral cavities. The newly formed dentin bridge thickness, the inflammation degree within the pulp tissue, and odontoblast function were thoroughly examined histologically and compared between the two groups using the Mann-Whitney test and an analysis software SPSS (statistical package for the social sciences, v.26, IBM, New York, N, USA), at a significance level of a=0.05.

Results: Dentin bridge composition in the TheraCal group had 80% effective tubules and 20% defective tubules, while in the MTA group, the proportions were 90% and 10%, respectively. Dentin bridge thickness in the TheraCal group was greater than 0.25 mm in 60%, and 0.1-0.25 mm in 40% of the sample compared to the MTA group, which had 70% greater than 0.25 mm, and 30% between 0.1 and 0.25 mm in dentin bridge thickness. Statistically, there was no significant difference between both groups (P=0.739).

Conclusion: Statistically insignificant differences in dentin bridge composition and thickness produced by both TheraCal and MTA materials render them similar in their effectiveness in treating pulp exposures through pulp capping.

Effects of calcium silicate-based cements on odonto/osteogenic differentiation potential in mesenchymal stem cells

The objective of this study was to evaluate the biological effects and odonto/osteogenic differentiation potential of Biodentine, NeoMTA Plus and TheraCal LC in tooth germ-derived stem cells (TGSCs). TGSCs were exposed to the material extracts. Biocompatibility was tested with MTS cell proliferation assay. Odonto/osteogenic differentiation was assessed with alkaline phosphatase (ALP) activity and mRNA gene expressions (RUNX2, DSPP and DMP-1). Scanning electronic microscopy/energy-dispersive X-ray (SEM/EDX) analysis and pH analysis were also performed for the materials. Data were evaluated using the one-way ANOVA and Tukey's tests. TGSCs remained viable after 7 days of incubation with all tested materials. Biodentine and NeoMTA Plus showed high ALP activity and increased expression of RUNX2, DSPP and DMP-1 compared to that of TheraCal LC. All materials can induce odonto/osteogenic differentiation of MSCs in various levels. Biocompatibility and odonto/osteogenic differentiation potential of Biodentine and NeoMTA Plus are similar and superior to that of TheraCal LC.

Comparative cytocompatibility of the new calcium silicate-based cement NeoPutty versus NeoMTA Plus and MTA on human dental pulp cells: an in vitro study

OBJECTIVES

The aim of the present in vitro study is to determine the cytocompatibility of the recently introduced NeoPutty in contact with human dental pulp cells compared with its precursor NeoMTA Plus and the classic gold standard MTA Angelus.

MATERIALS AND METHODS

Sample disks were obtained for each of the tested materials (5 mm diameter; 2 mm thickness; n = 30), along with 1:1, 1:2, and 1:4 material eluents. HDPCs were extracted and cultured with the tested materials (test groups) or in unconditioned medium (control group), and the following biocompatibility assays were performed: MTT assay, scratch wound assay, cell cytoskeleton staining assays, and cell attachment assessment via SEM. Additionally, material ion release and surface element composition were evaluated via ICP-MS and SEM-EDX, respectively. Each experimental condition was carried out three times and assessed in three independent experiments. Statistical significance was established at p < 0.05.

RESULTS

1:2 dilutions of all the tested materials exhibited a comparable cell viability to that of the control group at 48 and 72 h of culture (p < 0.05). The same was observed for 1:4 dilutions of the tested materials at 24, 48, and 72 h of culture (p > 0.05). All the tested materials exhibited adequate cytocompatibility in the remaining biocompatibility assays. MTA exhibited a significantly higher calcium ion release compared to NeoPutty and NeoMTA Plus (p < 0.05).

CONCLUSION

The results from the present work elucidate the adequate cytocompatibility of NeoPutty, NeoMTA Plus, and MTA Angelus towards human dental pulp cells.

CLINICAL RELEVANCE

Within the limitations of the present in vitro study, our results may act as preliminary evidence for its use in vital pulp therapy as a pulp capper. However, results need to be interpreted with caution until further clinical supporting evidence is reported.

Biocompatibility and Osteogenic Potential of Calcium Silicate-Based Cement Combined with Enamel Matrix Derivative: Effects on Human Bone Marrow-Derived Stem Cells

The characteristics of retrograde filling material are important factors that can affect the long-term success of apical microsurgery. Various calcium silicate-based cements (CSC) were introduced to overcome drawbacks of mineral trioxide aggregate (MTA), while Emdogain is known to be effective in the regeneration of periodontal tissues. The aim of this study is to evaluate the biocompatibility and osteogenic potential of various CSCs combined with Emdogain on human bone marrow-derived mesenchymal stem cells. Experimental groups were classified into eight groups depending on the material and the presence of Emdogain. In the cell-counting kit test, all experimental groups combined with Emdogain showed higher cell viability compared with those without Emdogain at days 1 and 2. In the wound-healing assay, cell migration increased significantly over time, with or without Emdogain. In the alkaline phosphatase assay, all groups treated with Emdogain showed higher activity compared with those without Emdogain at day 3 (p < 0.05). Using alizarin red S staining, all groups treated with Emdogain showed greater calcium nodule formation compared with those without Emdogain at days 7 and 14 (p < 0.05). In conclusion, using CSCs as retrograde filling materials and the application of additional Emdogain will increase bone regeneration and improve the prognosis of apical microsurgery.

Calcium-Silicate-Incorporated Gellan-Chitosan Induced Osteogenic Differentiation in Mesenchymal Stromal Cells

Gellan-chitosan (GC) incorporated with CS: 0% (GC-0 CS), 10% (GC-10 CS), 20% (GC-20 CS) or 40% (GC-40 CS) w/w was prepared using freeze-drying method to investigate its physicochemical, biocompatible, and osteoinductive properties in human bone-marrow mesenchymal stromal cells (hBMSCs). The composition of different groups was reflected in physicochemical analyses performed using BET, FTIR, and XRD. The SEM micrographs revealed excellent hBMSCs attachment in GC-40 CS. The Alamar Blue assay indicated an increased proliferation and viability of seeded hBMSCs in all groups on day 21 as compared with day 0. The hBMSCs seeded in GC-40 CS indicated osteogenic differentiation based on an amplified alkaline-phosphatase release on day 7 and 14 as compared with day 0. These cells supported bone mineralization on GC-40 CS based on Alizarin-Red assay on day 21 as compared with day 7 and increased their osteogenic gene expression (RUNX2, ALP, BGLAP, BMP, and Osteonectin) on day 21. The GC-40 CS-seeded hBMSCs initiated their osteogenic differentiation on day 7 as compared with counterparts based on an increased expression of type-1 collagen and BMP2 in immunocytochemistry analysis. In conclusion, the incorporation of 40% (w/w) calcium silicate in gellan-chitosan showed osteoinduction potential in hBMSCs, making it a potential biomaterial to treat critical bone defects.

Comparative Biological Properties and Mineralization Potential of 3 Endodontic Materials for Vital Pulp Therapy: Theracal PT, Theracal LC, and Biodentine on Human Dental Pulp Stem Cells

INTRODUCTION

The aim of this study was to assess the biological properties and mineralization potential of the new Theracal PT (Bisco Inc, Schaumburg, IL) compared with its predecessor Theracal LC (Bisco Inc) and the hydraulic silicate-based cement Biodentine (Septodont, Saint-Maur-des-Fossés, France) on human dental pulp stem cells (hDPSCs) in vitro.

METHODS

Standardized sample discs were obtained for each material (n = 30) together with 1:1, 1:2, and 1:4 material eluates. Previously characterized hDPSCs were cultured with the different materials in standardized conditions, and the following assays were performed: a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay, a wound healing assay, Annexin-V-FITC and 7-AAD staining (BD Biosciences, San Jose, CA), reactive oxygen species production analysis, cell adhesion and morphology evaluation via scanning electron microscopy and immunofluorescence, quantification of the expression of osteo/odontogenic markers via real-time quantitative reverse-transcriptase polymerase chain reaction, and alizarin red S staining. Statistical significance was established at P < .05.

RESULTS

All of the tested dilutions of Theracal LC exhibited a significantly higher cytotoxicity and reactive oxygen species production (P < .001) and a lower cell migration rate than the control group (hDPSCs cultured in growth medium without material extracts) at all of the measured time points (P < .001). Both 1:4 Theracal PT and Biodentine-treated hDPSCs exhibited similar levels of cytocompatibility to that of the control group, a significant up-regulation of at least 1 odontogenic marker (Biodentine: dentin sialophosphoprotein (P < .05); Theracal PT: osteonectin and runt-related transcription factor 2 [P < .001]), and a significantly higher mineralized nodule formation (P < .001).

CONCLUSIONS

The newly introduced TheraCal PT offers an improved in vitro cytocompatibility and mineralization potential on hDPSCs compared with its predecessor, TheraCal LC, and comparable biological properties to Biodentine.

Biological Characteristics and Odontogenic Differentiation Effects of Calcium Silicate-Based Pulp Capping Materials

We compared calcium silicate-based pulp capping materials to conventional calcium hydroxide in terms of their biological properties and potential effects on odontogenic differentiation in human dental pulp stem cells (hDPSCs). We cultured hDPSCs on disks (7-mm diameter, 4-mm high) of ProRoot MTA (Dentsply Tulsa Dental Specialties), Biodentine (Septodont), TheraCal LC (Bisco), or Dycal (Dentsply Tulsa Dental Specialties). Cell viability was assessed with cell counting (CCK) and scanning electron microscopy (SEM). Odontogenic activity was assessed by measuring alkaline phosphatase (ALP) activity and gene expression (quantitative real-time PCR). CCK assays showed that Dycal reduced cell viability compared to the other materials (p < 0.05). SEM showed low and absent cell attachment on TheraCal LC and Dycal disks, respectively. hDPSCs exposed to TheraCal LC and Dycal showed higher ALP activity on day 6 than the control group (p < 0.05). The day-9 Runx2 expression was higher in the ProRoot MTA and TheraCal LC groups than in the control group (p < 0.05). On day 14, the ProRoot MTA group showed the highest dentin sialophosphoprotein levels (not significant; p > 0.05). In conclusion, various pulp capping materials, except Dycal, exhibited biological properties favorable to hDPSC viability. ProRoot MTA and TheraCal LC promoted higher Runx2 expression than Biodentine. Future studies should explore the odontogenic potential of pulp capping materials.

The Effect of Calcium-Silicate Cements on Reparative Dentinogenesis Following Direct Pulp Capping on Animal Models

Dental pulp vitality is a desideratum for preserving the health and functionality of the tooth. In certain clinical situations that lead to pulp exposure, bioactive agents are used in direct pulp-capping procedures to stimulate the dentin-pulp complex and activate reparative dentinogenesis. Hydraulic calcium-silicate cements, derived from Portland cement, can induce the formation of a new dentin bridge at the interface between the biomaterial and the dental pulp. Odontoblasts are molecularly activated, and, if necessary, undifferentiated stem cells in the dental pulp can differentiate into odontoblasts. An extensive review of literature was conducted on MedLine/PubMed database to evaluate the histological outcomes of direct pulp capping with hydraulic calcium-silicate cements performed on animal models. Overall, irrespective of their physico-chemical properties and the molecular mechanisms involved in pulp healing, the effects of cements on tertiary dentin formation and pulp vitality preservation were positive. Histological examinations showed different degrees of dental pulp inflammatory response and complete/incomplete dentin bridge formation during the pulp healing process at different follow-up periods. Calcium silicate materials have the ability to induce reparative dentinogenesis when applied over exposed pulps, with different behaviors, as related to the animal model used, pulpal inflammatory responses, and quality of dentin bridges.

The calcium dynamics of human dental pulp stem cells stimulated with tricalcium silicate-based cements determine their differentiation and mineralization outcome

Calcium (Ca²⁺) signalling plays an indispensable role in dental pulp and dentin regeneration, but the Ca²⁺ responses of human dental pulp stem cells (hDPSCs) stimulated with tricalcium silicate-based (TCS-based) dental biomaterials remains largely unexplored. The objective of the present study was to identify and correlate extracellular Ca²⁺ concentration, intracellular Ca²⁺ dynamics, pH, cytotoxicity, gene expression and mineralization ability of human dental pulp stem cells (hDPSCs) stimulated with two different TCS-based biomaterials: Biodentine and ProRoot white MTA. The hDPSCs were exposed to the biomaterials, brought in contact with the overlaying medium, with subsequent measurements of extracellular Ca²⁺ and pH, and intracellular Ca²⁺ changes. Messenger RNA expression (BGLAP, TGF-β, MMP1 and BMP2), cytotoxicity (MTT and TUNEL) and mineralization potential (Alizarin red and Von Kossa staining) were then evaluated. Biodentine released significantly more Ca²⁺ in the α-MEM medium than ProRoot WMTA but this had no cytotoxic impact on hDPSCs. The larger Biodentine-linked Ca²⁺ release resulted in altered intracellular Ca²⁺ dynamics, which attained a higher maximum amplitude, faster rise time and increased area under the curve of the Ca²⁺ changes compared to ProRoot WMTA. Experiments with intracellular Ca²⁺ chelation, demonstrated that the biomaterial-triggered Ca²⁺ dynamics affected stem cell-related gene expression, cellular differentiation and mineralization potential. In conclusion, biomaterial-specific Ca²⁺ dynamics in hDPSCs determine differentiation and mineralization outcomes, with increased Ca²⁺ dynamics enhancing mineralization.