Mapping Single Walled Carbon Nanotubes in Photosynthetic Algae by Single-Cell Confocal Raman Microscopy

Cellular uptake of multi-walled carbon nanotubes is associated to genotoxic and teratogenic effects towards the freshwater diatom Nitzschia linearis

The increase in industrial production of multi-walled carbon nanotubes (MWCNTs) raises concerns about their potential adverse effects associated to environmental releases, especially in aquatic environments where they are likely to accumulate. This study focuses on the environmental impact of MWCNTs, specifically on a benthic freshwater diatom (Nitzschia linearis), which plays a major role in the primary production of water bodies. The obtained results indicate that exposure to MWCNTs in the presence of natural organic matter (NOM) inhibits diatom's growth in a dose-dependent manner after 72 h of exposure. Interestingly, the photosystem II quantum yield (PSIIQY) in diatoms remains unaffected even after exposure to MWCNTs at 10 mg/L. After 48 h of exposure, MWCNTs are found to bind preferentially to extracellular polymeric substances (EPS) produced by diatoms, which could decrease their toxicity by limiting their interaction with this organism. However, measurement of genotoxicity and teratogenicity in diatoms exposed to MWCNTs revealed that the exposure to MWCNTs increased the occurrence of cells with micronuclei and abnormal frustules. Microscopy analyses including two-photon excitation microscopy (TPEM) revealed the internalization of MWCNTs. Investigations of the diatom's frustule structure using Scanning electron microscopy (SEM) indicated that the presence of pore structures constitutes a pathway allowing MWCNTs uptake. The presence in the diatom's cytoplasm of MWCNTs might possibly induce disturbances of the cellular components, leading to the observed genotoxic and teratogenic effects. In view of previous studies, this work underscores the need for further studies on the interaction between nanomaterials and different diatom species, given the species-specific nature of the interactions.

Perspectives on nanomaterial-empowered bioremediation of heavy metals by photosynthetic microorganisms

Environmental remediation of heavy metals (HMs) is a crucial aspect of sustainable development, safeguarding natural resources, biodiversity, and the delicate balance of ecosystems, all of which are critical for sustaining life on our planet. The bioremediation of HMs by unicellular phototrophs harnesses their intrinsic detoxification mechanisms, including biosorption, bioaccumulation, and biotransformation. These processes can be remarkably effective in mitigating HMs, particularly at lower contaminant concentrations, surpassing the efficacy of conventional physicochemical methods and offering greater sustainability and cost-effectiveness. Here, we explore the potential of various engineered nanomaterials to further enhance the capacity and efficiency of HM bioremediation based on photosynthetic microorganisms. The critical assessment of the interactions between nanomaterials and unicellular phototrophs emphasised the ability of tailored nanomaterials to sustain photosynthetic metabolism and the defence system of microorganisms, thereby enhancing their growth, biomass accumulation, and overall bioremediation capacity. Key factors that could shape future research efforts toward sustainable nanobioremediation of HM are discussed, and knowledge gaps in the field have been identified. This study sheds light on the potential of nanobioremediation by unicellular phototrophs as an efficient, scalable, and cost-effective solution for HM removal.

Quantum Dots Assembled with Photosynthetic Antennae on a Carbon Nanotube Platform: A Nanohybrid for the Enhancement of Light Energy Harvesting

The construction of artificial systems for solar energy harvesting is still a challenge. There needs to be a light-harvesting antenna with a broad absorption spectrum and then the possibility to transfer harvested energy to the reaction center, converting photons into a storable form of energy. Bioinspired and bioderivative elements may help in achieving this aim. Here, we present an option for light harvesting: a nanobiohybrid of colloidal, semiconductor quantum dots (QDs) and natural photosynthetic antennae assembled on the surface of a carbon nanotube. For that, we used QDs of cadmium telluride and cyanobacterial phycobilisome rods (PBSr) or light-harvesting complex II (LHCII) of higher plants. For this nanobiohybrid, we confirmed composition and organization using infrared spectroscopy, X-ray photoelectron spectroscopy, and high-resolution confocal microscopy. Then, we proved that within such an assembly, there is a resonance energy transfer from QD to PBSr or LHCII. When such a nanobiohybrid was further combined with thylakoids, the energy was transferred to photosynthetic reaction centers and efficiently powered the photosystem I reaction center. The presented construct is proof of a general concept, combining interacting elements on a platform of a nanotube, allowing further variation within assembled elements.

Seed Priming with Single-Walled Carbon Nanotubes Grafted with Pluronic P85 Preserves the Functional and Structural Characteristics of Pea Plants

The engineering of carbon nanotubes in the last decades resulted in a variety of applications in electronics, electrochemistry, and biomedicine. A number of reports also evidenced their valuable application in agriculture as plant growth regulators and nanocarriers. In this work, we explored the effect of seed priming with single-walled carbon nanotubes grafted with Pluronic P85 polymer (denoted P85-SWCNT) on Pisum sativum (var. RAN-1) seed germination, early stages of plant development, leaf anatomy, and photosynthetic efficiency. We evaluated the observed effects in relation to hydro- (control) and P85-primed seeds. Our data clearly revealed that seed priming with P85-SWCNT is safe for the plant since it does not impair the seed germination, plant development, leaf anatomy, biomass, and photosynthetic activity, and even increases the amount of photochemically active photosystem II centers in a concentration-dependent manner. Only 300 mg/L concentration exerts an adverse effect on those parameters. The P85 polymer, however, was found to exhibit a number of negative effects on plant growth (i.e., root length, leaf anatomy, biomass accumulation and photoprotection capability), most probably related to the unfavorable interaction of P85 unimers with plant membranes. Our findings substantiate the future exploration and exploitation of P85-SWCNT as nanocarriers of specific substances promoting not only plant growth at optimal conditions but also better plant performance under a variety of environmental stresses.

Fluorescence quenching in thylakoid membranes induced by single-walled carbon nanotubes

The distinct photochemical and electrochemical properties of single-walled carbon nanotubes (SWCNTs) boosted the research interest in nanomaterial utilization in different in vivo and in vitro photosynthetic biohybrid setups. Aiming to unravel the yet not fully understood energetic interactions between the nanotubes and photosynthetic pigment-protein assemblies in an aqueous milieu, we studied SWCNT effects on the photochemical reactions of isolated thylakoid membranes (TMs), Photosystem II (PSII)-enriched membrane fragments and light-harvesting complexes (LHCII). The SWCNTs induced quenching of the steady-state chlorophyll fluorescence in the TM-biohybrid systems with a corresponding shortening of the average fluorescence lifetimes. The effect was not related to changes in the integrity and macroorganization of the photosynthetic membranes. Moreover, we found no evidence for direct excitation energy exchange between the SWCNTs and pigment-protein complexes, since neither the steady-state nor time-resolved fluorescence of LHCII-biohybrid systems differed from the corresponding controls. The attenuation of the fluorescence signal in the TM-biohybrid systems indicates possible leakage of photosynthetic electrons toward the nanotubes that most probably occurs at the level of the PSII acceptor site. Although it is too early to speculate on the nature of the involved electron donors and intermediate states, the observed energetic interaction could be exploited to increase the photoelectron capture efficiency of natural biohybrid systems for solar energy conversion.

Nanodiamond Particles Reduce Oxidative Stress Induced by Methyl Viologen and High Light in the Green Alga Chlamydomonas reinhardtii

Widely used in biomedical and bioanalytical applications, the detonation nanodiamonds (NDs) are generally considered to be biocompatible and non-toxic to a wide range of eukaryotic cells. Due to their high susceptibility to chemical modifications, surface functionalisation is often used to tune the biocompatibility and antioxidant activity of the NDs. The response of photosynthetic microorganisms to redox-active NDs is still poorly understood and is the focus of the present study. The green microalga Chlamydomonas reinhardtii was used to assess the potential phytotoxicity and antioxidant activity of NDs hosting hydroxyl functional groups at concentrations of 5–80 μg NDs/mL. The photosynthetic capacity of microalgae was assessed by measuring the maximum quantum yield of PSII photochemistry and the light-saturated oxygen evolution rate, while oxidative stress was assessed by lipid peroxidation and ferric-reducing antioxidant capacity. We demonstrated that hydroxylated NDs might reduce cellular levels of oxidative stress, protect PSII photochemistry and facilitate the PSII repair under methyl viologen and high light associated stress conditions. Factors involved in this protection may include the low phytotoxicity of hydroxylated NDs in microalgae and their ability to accumulate in cells and scavenge reactive oxygen species. Our findings could pave the way for using hydroxylated NDs as antioxidants to improve cellular stability in algae-based biotechnological applications or semi-artificial photosynthetic systems.

Single-walled carbon nanotubes protect photosynthetic reactions in Chlamydomonas reinhardtii against photoinhibition

Single-walled carbon nanotubes (SWCNTs) are among the most exploited carbon allotropes in nanosensing, bioengineering, and photobiological applications, however, the interactions of nanotubes with the photosynthetic process and structures are still poorly understood. We found that SWCNTs are not toxic to the photosynthetic apparatus of the model unicellular alga Chlamydomonas reinhardtii and demonstrate that this carbon nanomaterial can protect algal photosynthesis against photoinhibition. The results show that the inherent phytotoxicity of the nanotubes may be overcome by an intentional selection of nanomaterial characteristics. A low concentration (2 μg mL-1) of well-dispersed, purified and small SWCNTs did not alter the growth and pigment accumulation of the cultures. Indeed, under the photoinhibitory conditions of our experiments, SWCNT-enriched samples were characterized by a lower rate of PSII inactivation, reduced excitation pressure in PSII, a higher rate of photosynthetic electron transport, and an increased non-photochemical quenching in comparison with the controls. In addition, SWCNTs change the distribution of energy between the photosystems in favour of PSII (state 1). The underlying mechanism of this action is not yet understood but possibly, electrons or energy can be exchanged between the redox active nanotubes and photosynthetic components, and probably other redox active intra-chloroplast constituents. Alternatively, nanotubes may promote the formation of an NPQ conformation of PSII. Our results provided evidence for such electron/energy transfer from photosynthetic structures toward the nanotubes. The discovered photoprotective effects can potentially be used in photobiotechnology to maintain the photosynthetic activity of microorganisms under unfavourable conditions.

Carbon nanotube uptake in cyanobacteria for near-infrared imaging and enhanced bioelectricity generation in living photovoltaics

The distinctive properties of single-walled carbon nanotubes (SWCNTs) have inspired the development of many novel applications in the field of cell nanobiotechnology. However, studies thus far have not explored the effect of SWCNT functionalization on transport across the cell walls of prokaryotes. We explore the uptake of SWCNTs in Gram-negative cyanobacteria and demonstrate a passive length-dependent and selective internalization of SWCNTs decorated with positively charged biomolecules. We show that lysozyme-coated SWCNTs spontaneously penetrate the cell walls of a unicellular strain and a multicellular strain. A custom-built spinning-disc confocal microscope was used to image the distinct near-infrared SWCNT fluorescence within the autofluorescent cells, revealing a highly inhomogeneous distribution of SWCNTs. Real-time near-infrared monitoring of cell growth and division reveal that the SWCNTs are inherited by daughter cells. Moreover, these nanobionic living cells retained photosynthetic activity and showed an improved photo-exoelectrogenicity when incorporated into bioelectrochemical devices.

3D printed tablets containing oxaliplatin loaded alginate nanoparticles for colon cancer targeted delivery. An in vitro/in vivo study

This study aimed to develop a colon-targeted tablet of oxaliplatin (OP) using the combination of nanotechnology and fused deposition modeling (FDM) 3D printing to improve its antitumor activity, tumor targetability, and safety profile. Eudragit L100-55 filament containing OP loaded alginate nanoparticles (OP-NPs) were fabricated using hot-melt extrusion method and printed by an FDM printer to 3D printed tablets with good uniformity in the drug content and selective release of OP in the colonic environment. The antitumor effect of 3D printed tablets containing OP-NPs in CT-26 tumor-bearing mice was evaluated compared to intravenous and oral administration of OP solution, and compressed tablets containing OP-NPs, which were prepared by direct compression method with the same formulation. The antitumor effect of 3D printed tablets containing OP-NPs was remarkable and comparable with intravenous OP solution (p ˃ 0.05) with a better safety profile, whereas compressed tablets did not show any significant antitumor effect, probably in terms of non-selective drug release in stomach and upper intestine environments. This study highlights the potential of the combination of nanotechnology and 3D printing in the preparation of colon-specific drug delivery systems of chemotherapeutic drugs with good antitumor activity, tumor targetability, and safety profile for colorectal cancer treatment.