1
|
Sosnowska A, Hęclik KI, Kisała JB, Celuch M, Pogocki D. Perspectives for Photocatalytic Decomposition of Environmental Pollutants on Photoactive Particles of Soil Minerals. MATERIALS (BASEL, SWITZERLAND) 2024; 17:3975. [PMID: 39203153 PMCID: PMC11356147 DOI: 10.3390/ma17163975] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/03/2024] [Revised: 08/05/2024] [Accepted: 08/07/2024] [Indexed: 09/03/2024]
Abstract
The literature shows that both in laboratory and in industrial conditions, the photocatalytic oxidation method copes quite well with degradation of most environmental toxins and pathogenic microorganisms. However, the effective utilization of photocatalytic processes for environmental decontamination and disinfection requires significant technological advancement in both the area of semiconductor material synthesis and its application. Here, we focused on the presence and "photocatalytic capability" of photocatalysts among soil minerals and their potential contributions to the environmental decontamination in vitro and in vivo. Reactions caused by sunlight on the soil surface are involved in its normal redox activity, taking part also in the soil decontamination. However, their importance for decontamination in vivo cannot be overstated, due to the diversity of soils on the Earth, which is caused by the environmental conditions, such as climate, parent material, relief, vegetation, etc. The sunlight-induced reactions are just a part of complicated soil chemistry processes dependent on a plethora of environmental determinates. The multiplicity of affecting factors, which we tried to sketch from the perspective of chemists and environmental scientists, makes us rather skeptical about the effectiveness of the photocatalytic decontamination in vivo. On the other hand, there is a huge potential of the soils as the alternative and probably cheaper source of useful photocatalytic materials of unique properties. In our opinion, establishing collaboration between experts from different disciplines is the most crucial opportunity, as well as a challenge, for the advancement of photocatalysis.
Collapse
Affiliation(s)
- Agnieszka Sosnowska
- Department of Landscape Architecture, Institute of Environmental Engineering, Warsaw University of Life Sciences—SGGW, Nowoursynowska 166, 02-787 Warsaw, Poland;
| | - Kinga I. Hęclik
- Institute of Biology, College of Natural Sciences, University of Rzeszow, Rejtana 16C, 35-959 Rzeszow, Poland; (K.I.H.); (J.B.K.)
| | - Joanna B. Kisała
- Institute of Biology, College of Natural Sciences, University of Rzeszow, Rejtana 16C, 35-959 Rzeszow, Poland; (K.I.H.); (J.B.K.)
| | - Monika Celuch
- Łukasiewicz Research Network—Warsaw Institute of Technology, Duchnicka 3, 01-796 Warsaw, Poland;
| | - Dariusz Pogocki
- Institute of Nuclear Chemistry and Technology, Dorodna 16, 03-195 Warsaw, Poland
| |
Collapse
|
2
|
Rokicka-Konieczna P, Morawski AW. Photocatalytic Bacterial Destruction and Mineralization by TiO 2-Based Photocatalysts: A Mini Review. Molecules 2024; 29:2221. [PMID: 38792082 PMCID: PMC11123885 DOI: 10.3390/molecules29102221] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/18/2024] [Revised: 05/07/2024] [Accepted: 05/07/2024] [Indexed: 05/26/2024] Open
Abstract
This work presents an overview of the reports on the bacterial cell photocatalytic destruction and mineralization process in the presence of TiO2-based photocatalysts. The presented research included experiments conducted in air and water. Numerous works confirmed that a photocatalytic process with TiO2 led to bacteria and their organic residues' mineralization. Additionally, based on the obtained results, a possible two-stage mechanism of photocatalytic mineralization in the presence of TiO2-based materials was proposed. To help future studies, challenges of photocatalytic microorganism mineralization are also proposed. There are some aspects that need to be addressed, such as the lack of standardization of conducted research or relatively small amount of research on photocatalytic microorganism mineralization. According to our best knowledge, in the available literature, no work regarding a summary of previous research on photocatalytic bacterial mineralization process was found.
Collapse
Affiliation(s)
- Paulina Rokicka-Konieczna
- Department of Inorganic Chemical Technology and Environment Engineering, Faculty of Chemical Technology and Engineering, West Pomeranian University of Technology in Szczecin, Pułaskiego 10, 70-322 Szczecin, Poland;
| | | |
Collapse
|
3
|
Liu L, Shen Z, Wang C. Recent advances and new insights on the construction of photocatalytic systems for environmental disinfection. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2024; 353:120235. [PMID: 38310793 DOI: 10.1016/j.jenvman.2024.120235] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/14/2023] [Revised: 01/16/2024] [Accepted: 01/24/2024] [Indexed: 02/06/2024]
Abstract
Photocatalysis, as a sustainable and environmentally friendly green technology, has garnered widespread recognition and application across various fields. Especially its potential in environmental disinfection has been highly valued by researchers. This study commences with foundational research on photocatalytic disinfection technology and provides a comprehensive overview of its current developmental status. It elucidates the complexity of the interface reaction mechanism between photocatalysts and microorganisms, providing valuable insights from the perspectives of materials and microorganisms. This study reviews the latest design and modification strategies (Build heterojunction, defect engineering, and heteroatom doping) for photocatalysts in environmental disinfection. Moreover, this study investigates the research focuses and links in constructing photocatalytic disinfection systems, including photochemical reactors, light sources, and material immobilization technologies. It studies the complex challenges and influencing factors generated by different environmental media during the disinfection process. Simultaneously, a comprehensive review extensively covers the research status of photocatalytic disinfection concerning bacteria, fungi, and viruses. It reveals the observable efficiency differences caused by the microstructure of microorganisms during photocatalytic reactions. Based on these influencing factors, the economy and effectiveness of photocatalytic disinfection systems are analyzed and discussed. Finally, this study summarizes the current application status of photocatalytic disinfection products. The challenges faced by the synthesis and application of future photocatalysts are proposed, and the future development in this field is discussed. The potential for research and innovation has been further emphasized, with the core on improving efficiency, reducing costs, and strengthening the practical application of photocatalysis in environmental disinfection.
Collapse
Affiliation(s)
- Liming Liu
- School of Environmental Science and Engineering, Tianjin University, Tianjin, 300350, PR China
| | - Zhurui Shen
- School of Materials Science and Engineering, Nankai University, Tianjin, 300350, PR China.
| | - Can Wang
- School of Environmental Science and Engineering, Tianjin University, Tianjin, 300350, PR China.
| |
Collapse
|
4
|
Jin L, Ye M, Lin W, Ye Y, Chuang YC, Luo JY, Tang F. Identification of key potential infection processes and risk factors in the computed tomography examination process by FMEA method under COVID-19. BMC Infect Dis 2024; 24:257. [PMID: 38395803 PMCID: PMC10893727 DOI: 10.1186/s12879-024-09136-z] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/18/2023] [Accepted: 02/13/2024] [Indexed: 02/25/2024] Open
Abstract
PURPOSE To identify the key infection processes and risk factors in Computed Tomography (CT) examination process within the standard prevention and control measures for the COVID-19 epidemic, aiming to mitigate cross-infection occurrences in the hospital. METHOD The case hospital has assembled a team of 30 experts specialized in CT examination. Based on the CT examination process, the potential failure modes were assessed from the perspective of severity (S), occurrence probability (O), and detectability (D); they were then combined with corresponding risk prevention measures. Finally, key infection processes and risk factors were identified according to the risk priority number (RPN) and expert analysis. RESULTS Through the application of RPN and further analysis, four key potential infection processes were identified, including "CT request form (A1)," "during the scan of CT patient (B2)," "CT room and objects disposal (C2)," and "medical waste (garbage) disposal (C3)". In addition, eight key risk factors were also identified, including "cleaning personnel does not wear masks normatively (C32)," "nurse does not select the vein well, resulting in extravasation of the peripheral vein for enhanced CT (B25)," "patient cannot find the CT room (A13)," "patient has obtained a CT request form but does not know the procedure (A12)," "patient is too unwell to continue with the CT scan (B24)," "auxiliary staff (or technician) does not have a good grasp of the sterilization and disinfection standards (C21)," "auxiliary staff (or technician) does not sterilize the CT machine thoroughly (C22)," and "cleaning personnel lacks of knowledge of COVID-19 prevention and control (C33)". CONCLUSION Hospitals can publicize the precautions regarding CT examination through various channels, reducing the incidence of CT examination failure. Hospitals' cleaning services are usually outsourced, and the educational background of the staff employed in these services is generally not high. Therefore, during training and communication, it is more necessary to provide a series of scope and training programs that are aligned with their understanding level. The model developed in this study effectively identifies the key infection prevention process and critical risk factors, enhancing the safety of medical staff and patients. This has significant research implications for the potential epidemic of major infectious diseases.
Collapse
Affiliation(s)
- Lingzhi Jin
- Radiology department, Taizhou Central Hospital (Taizhou University Hospital), Taizhou, Zhejiang, China
| | - Meiting Ye
- Radiology department, Taizhou Central Hospital (Taizhou University Hospital), Taizhou, Zhejiang, China
| | - Wenhua Lin
- Radiology department, Taizhou Central Hospital (Taizhou University Hospital), Taizhou, Zhejiang, China
| | - Yong Ye
- Institute of Public Health and Emergency Management, Taizhou University, Taizhou, Zhejiang, China
- Business College, Taizhou University, Taizhou, Zhejiang, China
| | - Yen-Ching Chuang
- Institute of Public Health and Emergency Management, Taizhou University, Taizhou, Zhejiang, China.
- Business College, Taizhou University, Taizhou, Zhejiang, China.
- Key Laboratory of evidence-based Radiology of Taizhou, Linhai, Zhejiang, China.
| | - Jin-Yan Luo
- Institute for Hospital Management, Tsing Hua University, Shenzhen, Guangdong, China.
| | - Fuqin Tang
- Nursing Department, Taizhou Central Hospital (Taizhou University Hospital), Taizhou, China.
| |
Collapse
|
5
|
Hilton J, Nanao Y, Flokstra M, Askari M, Smith TK, Di Falco A, King PDC, Wahl P, Adamson CS. The role of ion dissolution in metal and metal oxide surface inactivation of SARS-CoV-2. Appl Environ Microbiol 2024; 90:e0155323. [PMID: 38259079 PMCID: PMC10880620 DOI: 10.1128/aem.01553-23] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/06/2023] [Accepted: 11/28/2023] [Indexed: 01/24/2024] Open
Abstract
Anti-viral surface coatings are under development to prevent viral fomite transmission from high-traffic touch surfaces in public spaces. Copper's anti-viral properties have been widely documented, but the anti-viral mechanism of copper surfaces is not fully understood. We screened a series of metal and metal oxide surfaces for anti-viral activity against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the causative agent of coronavirus disease (COVID-19). Copper and copper oxide surfaces exhibited superior anti-SARS-CoV-2 activity; however, the level of anti-viral activity was dependent on the composition of the carrier solution used to deliver virus inoculum. We demonstrate that copper ions released into solution from test surfaces can mediate virus inactivation, indicating a copper ion dissolution-dependent anti-viral mechanism. The level of anti-viral activity is, however, not dependent on the amount of copper ions released into solution per se. Instead, our findings suggest that degree of virus inactivation is dependent on copper ion complexation with other biomolecules (e.g., proteins/metabolites) in the virus carrier solution that compete with viral components. Although using tissue culture-derived virus inoculum is experimentally convenient to evaluate the anti-viral activity of copper-derived test surfaces, we propose that the high organic content of tissue culture medium reduces the availability of "uncomplexed" copper ions to interact with the virus, negatively affecting virus inactivation and hence surface anti-viral performance. We propose that laboratory anti-viral surface testing should include virus delivered in a physiologically relevant carrier solution (saliva or nasal secretions when testing respiratory viruses) to accurately predict real-life surface anti-viral performance when deployed in public spaces.IMPORTANCEThe purpose of evaluating the anti-viral activity of test surfaces in the laboratory is to identify surfaces that will perform efficiently in preventing fomite transmission when deployed on high-traffic touch surfaces in public spaces. The conventional method in laboratory testing is to use tissue culture-derived virus inoculum; however, this study demonstrates that anti-viral performance of test copper-containing surfaces is dependent on the composition of the carrier solution in which the virus inoculum is delivered to test surfaces. Therefore, we recommend that laboratory surface testing should include virus delivered in a physiologically relevant carrier solution to accurately predict real-life test surface performance in public spaces. Understanding the mechanism of virus inactivation is key to future rational design of improved anti-viral surfaces. Here, we demonstrate that release of copper ions from copper surfaces into small liquid droplets containing SARS-CoV-2 is a mechanism by which the virus that causes COVID-19 can be inactivated.
Collapse
Affiliation(s)
- Jane Hilton
- Biomedical Sciences Research Complex, School of Biology, University of St Andrews, St Andrews, Fife, United Kingdom
| | - Yoshiko Nanao
- SUPA, School of Physics and Astronomy, University of St Andrews, St Andrews, Fife, United Kingdom
| | - Machiel Flokstra
- SUPA, School of Physics and Astronomy, University of St Andrews, St Andrews, Fife, United Kingdom
| | - Meisam Askari
- SUPA, School of Physics and Astronomy, University of St Andrews, St Andrews, Fife, United Kingdom
| | - Terry K. Smith
- Biomedical Sciences Research Complex, School of Biology, University of St Andrews, St Andrews, Fife, United Kingdom
| | - Andrea Di Falco
- SUPA, School of Physics and Astronomy, University of St Andrews, St Andrews, Fife, United Kingdom
| | - Phil D. C. King
- SUPA, School of Physics and Astronomy, University of St Andrews, St Andrews, Fife, United Kingdom
| | - Peter Wahl
- SUPA, School of Physics and Astronomy, University of St Andrews, St Andrews, Fife, United Kingdom
| | - Catherine S. Adamson
- Biomedical Sciences Research Complex, School of Biology, University of St Andrews, St Andrews, Fife, United Kingdom
| |
Collapse
|
6
|
Gelir A, Asicioglu F, Yilmaz AS, Kuskucu M, Doymaz M, Özdemir OB, Sarıbal D, Salman S, Kadi ÖF, Özdemir S, Seyhan SN. UVC-LED-based face mask design and efficacy against common germs. Arh Hig Rada Toksikol 2023; 74:282-287. [PMID: 38146756 PMCID: PMC10750322 DOI: 10.2478/aiht-2023-74-3766] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/01/2023] [Revised: 09/01/2023] [Accepted: 10/01/2023] [Indexed: 12/27/2023] Open
Abstract
During the Covid-19 pandemic, one of the best means of personal protection was using face masks. In this context, the World Health Organization has declared the attempts to produce masks inactivating airborne virus species a welcome initiative. This preliminary study aimed to prove that airborne germs passing through a mask filter cartridge can be destroyed by the rays emitted from UVC LEDs placed in such cartridge. We therefore designed such a face mask and tested the efficiency of UVC LEDs placed in its cartridge against common contaminants, gram-positive Staphylococcus aureus, gram-negative Pseudomonas aeruginosa, and the influenza A/Puerto Rico/8/1934 virus because of its similarity with SARS CoV-2. Eight UVC LEDs with a total power of 75 mW provided sufficient germicidal effect for all three germs. In terms of safety, ozone production released during UVC LED emission was negligible. Our findings are promising, as they show that well-designed UVC-based face masks can be effective against airborne germs, but further research on a greater sample may help us learn more and optimise such face masks.
Collapse
Affiliation(s)
- Ali Gelir
- Istanbul Technical University, Physics Engineering Department, Istanbul, Turkey
| | - Faruk Asicioglu
- Istanbul University-Cerrahpaşa, Institute of Forensic Science and Legal Medicine, Istanbul, Turkey
| | - Aysegul S. Yilmaz
- Istanbul University-Cerrahpaşa, Institute of Forensic Science and Legal Medicine, Istanbul, Turkey
| | - Mert Kuskucu
- Istanbul University-Cerrahpaşa Faculty of Medicine, Istanbul, Turkey
| | - Mehmet Doymaz
- BezmialemVakıf University, Department of Medical Microbiology, Istanbul, Turkey
| | - Onur B. Özdemir
- Istanbul Technical University, Physics Engineering Department, Istanbul, Turkey
| | - Devrim Sarıbal
- Istanbul University-Cerrahpaşa Faculty of Medicine, Istanbul, Turkey
| | - Seda Salman
- Istanbul University-Cerrahpaşa Faculty of Medicine, Istanbul, Turkey
| | - Ömer F. Kadi
- Istanbul Technical University, Physics Engineering Department, Istanbul, Turkey
| | - Sedat Özdemir
- Haliç University Faculty of Medicine, Istanbul, Turkey
| | - Sinem N. Seyhan
- Istanbul Technical University, Physics Engineering Department, Istanbul, Turkey
| |
Collapse
|
7
|
Jyoti D, Sinha R. Physiological impact of personal care product constituents on non-target aquatic organisms. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 905:167229. [PMID: 37741406 DOI: 10.1016/j.scitotenv.2023.167229] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/05/2023] [Revised: 09/15/2023] [Accepted: 09/18/2023] [Indexed: 09/25/2023]
Abstract
Personal care products (PCPs) are products used in cleaning, beautification, grooming, and personal hygiene. The rise in diversity, usage, and availability of PCPs has resulted in their higher accumulation in the environment. Thus, these constitute an emerging category of environmental contaminants due to the potential of its constituents (chemical and non-chemical) to induce various physiological effects even at lower concentrations (ng/L). For analyzing the impact of the PCPs constituents on the non-target organism about 300 article including research articles, review articles and guidelines were studied from 2000 to 2023. This review aims to firstly discuss the fate and accumulation of PCPs in the aquatic environment and organisms; secondly provides overview of environmental risks that are linked to PCPs; thirdly review the trends, current status of regulations and risks associated with PCPs and finally discuss the knowledge gaps and future perspectives for future research. The article discusses important constituents of PCPs such as antimicrobials, cleansing agents and disinfectants, fragrances, insect repellent, moisturizers, plasticizers, preservatives, surfactants, UV filters, and UV stabilizers. Each of them has been found to display certain toxic impact on the aquatic organisms especially the plasticizers and UV filters. These continuously and persistently release biologically active and inactive components which interferes with the physiological system of the non-target organism such as fish, corals, shrimps, bivalves, algae, etc. With a rise in the number of toxicity reports, concerns are being raised over the potential impacts of these contaminant on aquatic organism and humans. The rate of adoption of nanotechnology in PCPs is greater than the evaluation of the safety risk associated with the nano-additives. Hence, this review article presents the current state of knowledge on PCPs in aquatic ecosystems.
Collapse
Affiliation(s)
- Divya Jyoti
- School of Biological and Environmental Sciences, Shoolini University of Biotechnology and Management Science, Solan, India
| | - Reshma Sinha
- Department of Animal Sciences, School of Life Sciences, Central University of Himachal Pradesh, India.
| |
Collapse
|
8
|
Kompatscher K, van der Vossen JMBM, van Heumen SPM, Traversari AAL. Scoping review on the efficacy of filter and germicidal technologies for capture and inactivation of micro-organisms and viruses. J Hosp Infect 2023; 142:39-48. [PMID: 37797657 DOI: 10.1016/j.jhin.2023.08.026] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/14/2023] [Revised: 08/24/2023] [Accepted: 08/31/2023] [Indexed: 10/07/2023]
Abstract
The COVID-19 (SARS-CoV-2) pandemic increased the focus on preventing contamination with airborne pathogens (e.g. viruses, bacteria, and fungi) by reducing their concentration. Filtration, UV or ionization technologies could contribute to air purification of the indoor environment and inactivation of micro-organisms. The aim of this study was to identify the relevant literature and review the scientific evidence presented on the efficacy of filter and germicidal technologies (e.g. non-physical technologies) in air purification applications used to capture and inactivate micro-organisms and airborne viruses (e.g. SARS-CoV-2, rhinovirus, influenzavirus) in practice. A scoping review was performed to collect literature. Adopting exclusion criteria resulted in a final number of 75 studies to be included in this research. Discussion is presented on inactivation efficiencies of ultraviolet germicidal irradiation (UVGI) and ionization applications in laboratory studies and in practice. Specific attention is given to studies relating the use of UVGI and ionization to inactivation of the SARS-CoV-2 virus. Based on the consulted literature, no unambiguous conclusions can be drawn regarding the effectiveness of air purification technologies in practice. The documented and well-controlled laboratory studies do not adequately represent the practical situation in which the purifier systems are used.
Collapse
Affiliation(s)
- K Kompatscher
- Netherlands Organization for Applied Scientific Research, Department of Building and Energy Systems, Delft, The Netherlands.
| | - J M B M van der Vossen
- Netherlands Organization for Applied Scientific Research, Department of Microbiology and Systems Biology, Leiden, The Netherlands
| | - S P M van Heumen
- Netherlands Organization for Applied Scientific Research, Department of Building and Energy Systems, Delft, The Netherlands
| | - A A L Traversari
- Netherlands Organization for Applied Scientific Research, Department of Building and Energy Systems, Delft, The Netherlands
| |
Collapse
|
9
|
Ouyang H, Wang L, Sapkota D, Yang M, Morán J, Li L, Olson BA, Schwartz M, Hogan CJ, Torremorell M. Control technologies to prevent aerosol-based disease transmission in animal agriculture production settings: a review of established and emerging approaches. Front Vet Sci 2023; 10:1291312. [PMID: 38033641 PMCID: PMC10682736 DOI: 10.3389/fvets.2023.1291312] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/08/2023] [Accepted: 10/26/2023] [Indexed: 12/02/2023] Open
Abstract
Transmission of infectious agents via aerosols is an ever-present concern in animal agriculture production settings, as the aerosol route to disease transmission can lead to difficult-to-control and costly diseases, such as porcine respiratory and reproductive syndrome virus and influenza A virus. It is increasingly necessary to implement control technologies to mitigate aerosol-based disease transmission. Here, we review currently utilized and prospective future aerosol control technologies to collect and potentially inactivate pathogens in aerosols, with an emphasis on technologies that can be incorporated into mechanically driven (forced air) ventilation systems to prevent aerosol-based disease spread from facility to facility. Broadly, we find that control technologies can be grouped into three categories: (1) currently implemented technologies; (2) scaled technologies used in industrial and medical settings; and (3) emerging technologies. Category (1) solely consists of fibrous filter media, which have been demonstrated to reduce the spread of PRRSV between swine production facilities. We review the mechanisms by which filters function and are rated (minimum efficiency reporting values). Category (2) consists of electrostatic precipitators (ESPs), used industrially to collect aerosol particles in higher flow rate systems, and ultraviolet C (UV-C) systems, used in medical settings to inactivate pathogens. Finally, category (3) consists of a variety of technologies, including ionization-based systems, microwaves, and those generating reactive oxygen species, often with the goal of pathogen inactivation in aerosols. As such technologies are typically first tested through varied means at the laboratory scale, we additionally review control technology testing techniques at various stages of development, from laboratory studies to field demonstration, and in doing so, suggest uniform testing and report standards are needed. Testing standards should consider the cost-benefit of implementing the technologies applicable to the livestock species of interest. Finally, we examine economic models for implementing aerosol control technologies, defining the collected infectious particles per unit energy demand.
Collapse
Affiliation(s)
- Hui Ouyang
- Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN, United States
- Department of Mechanical Engineering, University of Texas-Dallas, Richardson, TX, United States
| | - Lan Wang
- Department of Veterinary Population Medicine, University of Minnesota, Saint Paul, MN, United States
| | - Deepak Sapkota
- Department of Mechanical Engineering, University of Texas-Dallas, Richardson, TX, United States
| | - My Yang
- Department of Veterinary Population Medicine, University of Minnesota, Saint Paul, MN, United States
| | - José Morán
- Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN, United States
| | - Li Li
- Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN, United States
| | - Bernard A. Olson
- Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN, United States
| | - Mark Schwartz
- Department of Veterinary Population Medicine, University of Minnesota, Saint Paul, MN, United States
- Schwartz Farms, Sleepy Eye, MN, United States
| | - Christopher J. Hogan
- Department of Mechanical Engineering, University of Minnesota, Minneapolis, MN, United States
| | - Montserrat Torremorell
- Department of Veterinary Population Medicine, University of Minnesota, Saint Paul, MN, United States
| |
Collapse
|
10
|
Ratliff KM, Oudejans L, Archer J, Calfee W, Gilberry JU, Hook DA, Schoppman WE, Yaga RW, Brooks L, Ryan S. Impact of test methodology on the efficacy of triethylene glycol (Grignard Pure) against bacteriophage MS2. AEROSOL SCIENCE AND TECHNOLOGY : THE JOURNAL OF THE AMERICAN ASSOCIATION FOR AEROSOL RESEARCH 2023; 57:1178-1185. [PMID: 38268721 PMCID: PMC10805242 DOI: 10.1080/02786826.2023.2262004] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/01/2023] [Accepted: 09/15/2023] [Indexed: 01/26/2024]
Abstract
The COVID-19 pandemic has raised interest in using chemical air treatments as part of a strategy to reduce the risk of disease transmission, but more information is needed to characterize their efficacy at scales translatable to applied settings and to develop standardized test methods for characterizing the performance of these products. Grignard Pure, a triethylene glycol (TEG) active ingredient air treatment, was evaluated using two different test protocols in a large bioaerosol test chamber and observed to inactivate bacteriophage MS2 in air (up to 99.9% at 90 min) and on surfaces (up to 99% at 90 min) at a concentration of approximately 1.2 - 1.5 mg/m3. Introducing bioaerosol into a TEG-charged chamber led to overall greater reductions compared to when TEG was introduced into a bioaerosol-charged chamber, although the differences in efficacy against airborne MS2 were only significant in the first 15 min. Time-matched control conditions (no TEG present) and replicate tests for each condition were essential for characterizing treatment efficacy. These findings suggest that chemical air treatments could be effective in reducing the air and surface concentrations of infectious pathogens in occupied spaces, although standard methods are needed for evaluating their efficacy and comparing results across studies. The potential health impacts of chronic exposure to chemicals should also be considered, but those were not evaluated here.
Collapse
Affiliation(s)
- Katherine M. Ratliff
- Center for Environmental Solutions and Emergency Response, Office of Research and Development, U.S. Environmental Protection Agency, Research Triangle Park, North Carolina, USA
| | - Lukas Oudejans
- Center for Environmental Solutions and Emergency Response, Office of Research and Development, U.S. Environmental Protection Agency, Research Triangle Park, North Carolina, USA
| | - John Archer
- Center for Environmental Solutions and Emergency Response, Office of Research and Development, U.S. Environmental Protection Agency, Research Triangle Park, North Carolina, USA
| | - Worth Calfee
- Center for Environmental Solutions and Emergency Response, Office of Research and Development, U.S. Environmental Protection Agency, Research Triangle Park, North Carolina, USA
| | | | - David Adam Hook
- Jacobs Technology Inc, Research Triangle Park, North Carolina, USA
| | | | - Robert W. Yaga
- Jacobs Technology Inc, Research Triangle Park, North Carolina, USA
| | - Lance Brooks
- Center for Environmental Solutions and Emergency Response, Office of Research and Development, U.S. Environmental Protection Agency, Research Triangle Park, North Carolina, USA
| | - Shawn Ryan
- Center for Environmental Solutions and Emergency Response, Office of Research and Development, U.S. Environmental Protection Agency, Research Triangle Park, North Carolina, USA
| |
Collapse
|
11
|
Mohammed W, Matalkeh M, Al Soubaihi RM, Elzatahry A, Saoud KM. Visible Light Photocatalytic Degradation of Methylene Blue Dye and Pharmaceutical Wastes over Ternary NiO/Ag/TiO 2 Heterojunction. ACS OMEGA 2023; 8:40063-40077. [PMID: 37929122 PMCID: PMC10620881 DOI: 10.1021/acsomega.3c01766] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 03/20/2023] [Accepted: 10/03/2023] [Indexed: 11/07/2023]
Abstract
Ternary NiO/Ag/TiO2 heterojunction photocatalyst was prepared by deposition coprecipitation for visible light photocatalytic applications. Physicochemical properties of the synthesized NiO/Ag/TiO2 composite were characterized by X-ray diffraction, Brunauer-Emmett-Teller surface area measurement method, transmission electron microscopy, energy-dispersive X-ray spectroscopy techniques, X-ray photoelectron spectroscopy technique, and ultraviolet-visible absorption spectroscopy. The results suggest that the well-dispersed small metallic silver nanoparticles (<3 nm) facilitate electron transfer and bridge nickel oxide and titanium oxide. The photocatalytic degradation and the methylene blue (MB) dye kinetics were carried out on a ternary NiO/Ag/TiO2 composite and compared to bare TiO2 under visible light irradiation. The results indicate that NiO/Ag/TiO2 has superior MB photodegradation efficiency with a high reaction rate constant and low degradation time (93.15% within 60 min) compared to Ag/TiO2, NiO/TiO2, and bare TiO2. NiO/Ag/TiO2 nanocomposite was also investigated for the most common pharmaceutical waste degradation and exhibited excellent degradation efficiency. The enhancement of the composite's performance could be attributed to the surface plasmonic resonance of the Ag nanoparticles, the formation of Schottky junctions at the Ag-TiO2 and Ag-NiO interface, and the p-n heterojunction between NiO and TiO2. Ag NPs act as a photosynthesizer and a photocatalyst, facilitate electron transfer, shift the absorption to the visible light region, reduce the band gap of TiO2, suppress the electron-hole recombination, and enhance the photocatalytic activity and stability as a result.
Collapse
Affiliation(s)
- Widad Mohammed
- Material
Science and Technology Program, College of Arts and Sciences, Qatar University, 2713 Doha, Qatar
| | - Maha Matalkeh
- Liberal
Arts and Science, Virginia Commonwealth
University School of Arts in Qatar, PO Box 8095, Doha, Qatar
| | - Rola Mohammad Al Soubaihi
- Functional
NanoMaterials Group, Department of Applied Physics, School of Engineering
Sciences, KTH Royal Institute of Technology, Hannes Alfvéns väg
12, 11419 Stockholm, Sweden
| | - Ahmed Elzatahry
- Material
Science and Technology Program, College of Arts and Sciences, Qatar University, 2713 Doha, Qatar
| | - Khaled M. Saoud
- Liberal
Arts and Science, Virginia Commonwealth
University School of Arts in Qatar, PO Box 8095, Doha, Qatar
| |
Collapse
|
12
|
Yong SS, Lee JI, Kang DH. Bacterial composition of refrigerators in households and inactivation of airborne Staphylococcus aureus using a TiO 2-UVLED module in a 512 L aerobiology chamber. Food Microbiol 2023; 114:104274. [PMID: 37290863 DOI: 10.1016/j.fm.2023.104274] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/15/2023] [Revised: 03/30/2023] [Accepted: 04/01/2023] [Indexed: 06/10/2023]
Abstract
This study aimed to investigate the microbiota in the air and on the surface of a refrigerator and to inactivate aerosolized Staphylococcus aureus using a TiO2-UVLED module. A total of 100 L of the air and 5000 cm2 surfaces in seven household refrigerators were collected using an air sampler and a swab, respectively. Samples were subjected to microbiota analysis as well as quantitative analyses of aerobic or anaerobic bacteria. The level of airborne aerobic bacteria was 4.26 log CFU/vol (100 L), while that of surface aerobic bacteria was 5.27 log CFU/surface (5000 cm2). PCoA based on the Bray-Curtis metric revealed that the bacterial composition differed between samples collected from refrigerators with and without a vegetable drawer. Moreover, pathogenic bacteria containing genera and order from each sample were found, such as Enterobacaterales, Pseudomonas, Staphylococcus, Listeria, and Bacillus. Among them, Staphylococcus aureus was determined to be a core hazardous pathogen in air. Therefore, three S. aureus strains isolated from the air in refrigerators, as well as a reference strain of S. aureus (ATCC 6538P), were inactivated by a TiO2-UVLED module in a 512 L aerobiology chamber. All aerosolized S. aureus were reduced over 1.6 log CFU/vol after treatment with TiO2 under UVA (365 nm) light at 40 J/cm2. These findings suggest that TiO2-UVLED modules have the potential to be used to control airborne bacteria in household refrigerators.
Collapse
Affiliation(s)
- So-Seum Yong
- Department of Food and Animal Biotechnology, Department of Agricultural Biotechnology, Center for Food and Bioconvergence, Research Institute for Agricultural and Life Sciences, Seoul National University, Seoul, 08826, Republic of Korea
| | - Jae-Ik Lee
- Department of Food and Animal Biotechnology, Department of Agricultural Biotechnology, Center for Food and Bioconvergence, Research Institute for Agricultural and Life Sciences, Seoul National University, Seoul, 08826, Republic of Korea
| | - Dong-Hyun Kang
- Department of Food and Animal Biotechnology, Department of Agricultural Biotechnology, Center for Food and Bioconvergence, Research Institute for Agricultural and Life Sciences, Seoul National University, Seoul, 08826, Republic of Korea; Institutes of Green Bio Science & Technology, Seoul National University, Pyeongchang-gun, Gangwon-do, 25354, Republic of Korea.
| |
Collapse
|
13
|
Knobling B, Franke G, Belmar Campos C, Büttner H, Christner M, Klupp EM, Maurer PM, Knobloch JK. Tolerance of clinical vancomycin-resistant Enterococcus faecium isolates against UV-C light from a mobile source. Antimicrob Resist Infect Control 2023; 12:63. [PMID: 37403134 PMCID: PMC10320914 DOI: 10.1186/s13756-023-01259-3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/29/2022] [Accepted: 05/29/2023] [Indexed: 07/06/2023] Open
Abstract
BACKGROUND Admission to a room previously occupied by patients carrying environmentally robust pathogens implies an increased risk of acquiring those pathogens. Therefore, 'No-touch' automated room disinfection systems, including devices based on UV-C irradiation, are discussed to improve terminal cleaning. It is still unclear if clinical isolates of relevant pathogens behave differently under UV-C irradiation compared to laboratory strains used in the approval process of disinfection procedures. In this study we analysed the susceptibility of well characterized clonally divergent vancomycin-resistant enterococci (VRE) strains, including a linezolid-resistant isolate, against UV-C radiation. METHODS Susceptibility against UV-C of ten clonally divergent clinical isolates of VRE was determined in comparison to the commonly used test organism Enterococcus hirae ATCC 10541. Ceramic tiles contaminated with 105 to 106 colony forming units/25 cm² of the different enterococci were positioned at a distance of 1.0 and 1.5 m and irradiated for 20 s, resulting in a UV-C dose of 50 and 22 mJ/cm², respectively. Reduction factors were calculated after quantitative culture of the bacteria recovered from treated and untreated surfaces. RESULTS Susceptibility to UV-C varied considerably among the strains studied, with the mean value of the most robust strain being up to a power of ten lower compared to the most sensitive strain at both UV-C doses. The two most tolerant strains belonged to MLST sequence types ST80 and ST1283. The susceptibility of the laboratory strain E. hirae ATCC 10541 ranged between the most sensitive and most tolerant isolates for both irradiation doses. However, for UV-C dose of 22 mJ/cm², the reduction of the most tolerant isolate of ST1283 was statistically significantly lower compared to E. hirae ATCC 10541. The most susceptible strains belonged to the MLST sequence types ST117 and ST203. CONCLUSIONS These results indicate that UV-C doses reported in the literature are sufficient for the reduction of commonly used reference strains of enterococci but could be insufficient for the reduction of tolerant patient VRE-isolates in a hospital setting. Therefore, for future studies, the most tolerant clinical isolates should be used to validate automated UV-C devices or longer exposure times should be expected to ensure efficacy in the real world.
Collapse
Affiliation(s)
- B Knobling
- Institute for Medical Microbiology, Virology and Hygiene, Department Infection Prevention and Control, University Medical Center Hamburg-Eppendorf, Hamburg, Germany
| | - G Franke
- Institute for Medical Microbiology, Virology and Hygiene, Department Infection Prevention and Control, University Medical Center Hamburg-Eppendorf, Hamburg, Germany
| | - C Belmar Campos
- Institute for Medical Microbiology, Virology and Hygiene, Department Infection Prevention and Control, University Medical Center Hamburg-Eppendorf, Hamburg, Germany
| | - H Büttner
- Institute for Medical Microbiology, Virology and Hygiene, Department Infection Prevention and Control, University Medical Center Hamburg-Eppendorf, Hamburg, Germany
| | - M Christner
- Institute for Medical Microbiology, Virology and Hygiene, University Medical Center Hamburg-Eppendorf, Hamburg, Germany
| | - E M Klupp
- Institute for Medical Microbiology, Virology and Hygiene, Department Infection Prevention and Control, University Medical Center Hamburg-Eppendorf, Hamburg, Germany
| | - P M Maurer
- Institute for Medical Microbiology, Virology and Hygiene, Department Infection Prevention and Control, University Medical Center Hamburg-Eppendorf, Hamburg, Germany
| | - J K Knobloch
- Institute for Medical Microbiology, Virology and Hygiene, Department Infection Prevention and Control, University Medical Center Hamburg-Eppendorf, Hamburg, Germany.
| |
Collapse
|
14
|
Knobling B, Franke G, Carlsen L, Belmar Campos C, Büttner H, Klupp EM, Maurer PM, Knobloch JK. Phenotypic Variation in Clinical S. aureus Isolates Did Not Affect Disinfection Efficacy Using Short-Term UV-C Radiation. Microorganisms 2023; 11:1332. [PMID: 37317306 DOI: 10.3390/microorganisms11051332] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/22/2023] [Revised: 05/10/2023] [Accepted: 05/16/2023] [Indexed: 06/16/2023] Open
Abstract
Pigmentation, catalase activity and biofilm formation are virulence factors that cause resistance of Staphylococcus aureus to environmental stress factors including disinfectants. In recent years, automatic UV-C room disinfection gained greater importance in enhanced disinfection procedures to improve disinfection success in hospitals. In this study, we evaluated the effect of naturally occurring variations in the expression of virulence factors in clinical S. aureus isolates on tolerance against UV-C radiation. Quantification of staphyloxanthin expression, catalase activity and biofilm formation for nine genetically different clinical S. aureus isolates as well as reference strain S. aureus ATCC 6538 were performed using methanol extraction, a visual approach assay and a biofilm assay, respectively. Log10 reduction values (LRV) were determined after irradiation of artificially contaminated ceramic tiles with 50 and 22 mJ/cm2 UV-C using a commercial UV-C disinfection robot. A wide variety of virulence factor expression was observed, indicating differential regulation of global regulatory networks. However, no direct correlation with the strength of expression with UV-C tolerance was observed for either staphyloxanthin expression, catalase activity or biofilm formation. All isolates were effectively reduced with LRVs of 4.75 to 5.94. UV-C disinfection seems therefore effective against a wide spectrum of S. aureus strains independent of occurring variations in the expression of the investigated virulence factors. Due to only minor differences, the results of frequently used reference strains seem to be representative also for clinical isolates in S. aureus.
Collapse
Affiliation(s)
- Birte Knobling
- Department Infection Prevention and Control, Institute for Medical Microbiology, Virology and Hygiene, University Medical Center Hamburg-Eppendorf, Martinistraße 52, 20246 Hamburg, Germany
| | - Gefion Franke
- Department Infection Prevention and Control, Institute for Medical Microbiology, Virology and Hygiene, University Medical Center Hamburg-Eppendorf, Martinistraße 52, 20246 Hamburg, Germany
| | - Laura Carlsen
- Department Infection Prevention and Control, Institute for Medical Microbiology, Virology and Hygiene, University Medical Center Hamburg-Eppendorf, Martinistraße 52, 20246 Hamburg, Germany
| | - Cristina Belmar Campos
- Department Infection Prevention and Control, Institute for Medical Microbiology, Virology and Hygiene, University Medical Center Hamburg-Eppendorf, Martinistraße 52, 20246 Hamburg, Germany
| | - Henning Büttner
- Department Infection Prevention and Control, Institute for Medical Microbiology, Virology and Hygiene, University Medical Center Hamburg-Eppendorf, Martinistraße 52, 20246 Hamburg, Germany
| | - Eva M Klupp
- Department Infection Prevention and Control, Institute for Medical Microbiology, Virology and Hygiene, University Medical Center Hamburg-Eppendorf, Martinistraße 52, 20246 Hamburg, Germany
| | - Philipp Maximilian Maurer
- Department Infection Prevention and Control, Institute for Medical Microbiology, Virology and Hygiene, University Medical Center Hamburg-Eppendorf, Martinistraße 52, 20246 Hamburg, Germany
| | - Johannes K Knobloch
- Department Infection Prevention and Control, Institute for Medical Microbiology, Virology and Hygiene, University Medical Center Hamburg-Eppendorf, Martinistraße 52, 20246 Hamburg, Germany
| |
Collapse
|
15
|
El-Sayyad GS, Elfadil D, Gaballah MS, El-Sherif DM, Abouzid M, Nada HG, Khalil MS, Ghorab MA. Implication of nanotechnology to reduce the environmental risks of waste associated with the COVID-19 pandemic. RSC Adv 2023; 13:12438-12454. [PMID: 37091621 PMCID: PMC10117286 DOI: 10.1039/d3ra01052j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/15/2023] [Accepted: 04/14/2023] [Indexed: 04/25/2023] Open
Abstract
The COVID-19 pandemic is the largest global public health outbreak in the 21st century so far. It has contributed to a significant increase in the generation of waste, particularly personal protective equipment and hazardous medical, as it can contribute to environmental pollution and expose individuals to various hazards. To minimize the risk of infection, the entire surrounding environment should be disinfected or neutralized regularly. Effective medical waste management can add value by reducing the spread of COVID-19 and increasing the recyclability of materials instead of sending them to landfill. Developing an antiviral coating for the surface of objects frequently used by the public could be a practical solution to prevent the spread of virus particles and the inactivation of virus transmission. Relying on an abundance of engineered materials identifiable by their useful physicochemical properties through versatile chemical functionalization, nanotechnology offers a number of approaches to address this emergency. Here, through a multidisciplinary perspective encompassing various fields such as virology, biology, medicine, engineering, chemistry, materials science, and computer science, we describe how nanotechnology-based strategies can support the fight against COVID-19 well as infectious diseases in general, including future pandemics. In this review, the design of the antiviral coating to combat the spread of COVID-19 was discussed, and technological attempts to minimize the coronavirus outbreak were highlighted.
Collapse
Affiliation(s)
- Gharieb S El-Sayyad
- Department of Microbiology and Immunology, Faculty of Pharmacy, Ahram Canadian University (ACU) Giza Egypt
- Department of Microbiology and Immunology, Faculty of Pharmacy, Galala University New Galala City Suez Egypt
- Drug Microbiology Laboratory, Drug Radiation Research Department, National Center for Radiation Research and Technology (NCRRT), Egyptian Atomic Energy Authority (EAEA) Cairo Egypt
| | - Dounia Elfadil
- Biology and Chemistry Department, Hassan II University of Casablanca Morocco
| | - Mohamed S Gaballah
- College of Engineering (Key Laboratory for Clean Renewable Energy Utilization Technology, Ministry of Agriculture), China Agricultural University Beijing 100083 PR China
- Department of Physical Pharmacy and Pharmacokinetics, Faculty of Pharmacy, Poznan University of Medical Sciences Rokietnicka 3 St. 60-806 Poznan Poland
| | - Dina M El-Sherif
- National Institute of Oceanography and Fisheries (NIOF) Cairo Egypt
| | - Mohamed Abouzid
- Department of Physical Pharmacy and Pharmacokinetics, Faculty of Pharmacy, Poznan University of Medical Sciences Rokietnicka 3 St. 60-806 Poznan Poland
- Doctoral School, Poznan University of Medical Sciences 60-812 Poznan Poland
| | - Hanady G Nada
- Drug Microbiology Laboratory, Drug Radiation Research Department, National Center for Radiation Research and Technology (NCRRT), Egyptian Atomic Energy Authority (EAEA) Cairo Egypt
- Department of Microbiology, Faculty of Science, Ain Shams University Cairo Egypt
| | - Mohamed S Khalil
- Agricultural Research Center, Central Agricultural Pesticides Laboratory Alexandria Egypt
| | - Mohamed A Ghorab
- Wildlife Toxicology Laboratory, Department of Animal Science, Institute for Integrative Toxicology (IIT), Michigan State University East Lansing MI 48824 USA
| |
Collapse
|
16
|
Nanomaterials Aspects for Photocatalysis as Potential for the Inactivation of COVID-19 Virus. Catalysts 2023. [DOI: 10.3390/catal13030620] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/22/2023] Open
Abstract
Coronavirus disease-2019 is caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and is the most difficult recent global outbreak. Semiconducting materials can be used as effective photocatalysts in photoactive technology by generating various reactive oxidative species (ROS), including superoxide (•O2−) and hydroxyl (•OH) radicals, either by degradation of proteins, DNA, and RNA or by inhibition of cell development through terminating the cellular membrane. This review emphasizes the capability of photocatalysis as a reliable, economical, and fast-preferred method with high chemical and thermal stability for the deactivation and degradation of SARS-CoV-2. The light-generated holes present in the valence band (VB) have strong oxidizing properties, which result in the oxidation of surface proteins and their inactivation under light illumination. In addition, this review discusses the most recent photocatalytic systems, including metals, metal oxides, carbonaceous nanomaterials, and 2-dimensional advanced structures, for efficient SARS-CoV-2 inactivation using different photocatalytic experimental parameters. Finally, this review article summarizes the limitations of these photocatalytic approaches and provides recommendations for preserving the antiviral properties of photocatalysts, large-scale treatment, green sustainable treatment, and reducing the overall expenditure for applications.
Collapse
|
17
|
Assadi AA, Baaloudj O, Khezami L, Ben Hamadi N, Mouni L, Assadi AA, Ghorbal A. An Overview of Recent Developments in Improving the Photocatalytic Activity of TiO 2-Based Materials for the Treatment of Indoor Air and Bacterial Inactivation. MATERIALS (BASEL, SWITZERLAND) 2023; 16:2246. [PMID: 36984127 PMCID: PMC10056653 DOI: 10.3390/ma16062246] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/25/2022] [Revised: 02/25/2023] [Accepted: 02/27/2023] [Indexed: 06/18/2023]
Abstract
Indoor air quality has become a significant public health concern. The low cost and high efficiency of photocatalytic technology make it a natural choice for achieving deep air purification. Photocatalysis procedures have been widely investigated for environmental remediation, particularly for air treatment. Several semiconductors, such as TiO2, have been used for photocatalytic purposes as catalysts, and they have earned a lot of interest in the last few years owing to their outstanding features. In this context, this review has collected and discussed recent studies on advances in improving the photocatalytic activity of TiO2-based materials for indoor air treatment and bacterial inactivation. In addition, it has elucidated the properties of some widely used TiO2-based catalysts and their advantages in the photocatalytic process as well as improved photocatalytic activity using doping and heterojunction techniques. Current publications about various combined catalysts have been summarized and reviewed to emphasize the significance of combining catalysts to increase air treatment efficiency. Besides, this paper summarized works that used these catalysts to remove volatile organic compounds (VOCs) and microorganisms. Moreover, the reaction mechanism has been described and summarized based on literature to comprehend further pollutant elimination and microorganism inactivation using photocatalysis. This review concludes with a general opinion and an outlook on potential future research topics, including viral disinfection and other hazardous gases.
Collapse
Affiliation(s)
- Achraf Amir Assadi
- Center for Research on Microelectronics and Nanotechnology, CRMN Sousse Techno Park, Sahloul BP 334, Sousse 4054, Tunisia
- Research Unit Advanced Materials, Applied Mechanics, Innovative Processes and Environment, Higher Institute of Applied Sciences and Technology of Gabes (ISSAT), University of Gabes, Gabes 6029, Tunisia
| | - Oussama Baaloudj
- Laboratory of Reaction Engineering, Faculty of Mechanical Engineering and Process Engineering, Université des Sciences et de la Technologie Houari Boumediene, BP 32, Algiers 16111, Algeria
- Laboratory of Advanced Materials for Energy and Environment, Université du Québec à Trois-Rivières (UQTR), 3351, Boul. des Forges, C.P. 500, Trois-Rivières, QC G9A 5H7, Canada
| | - Lotfi Khezami
- Chemistry Department, College of Science, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh 11432, Saudi Arabia
| | - Naoufel Ben Hamadi
- Chemistry Department, College of Science, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh 11432, Saudi Arabia
| | - Lotfi Mouni
- Laboratoire de Gestion et Valorisation des Ressources Naturelles et Assurance Qualité, Faculté SNVST, Université Bouira, Bouira 10000, Algeria
| | - Aymen Amine Assadi
- École Nationale Supérieure de Chimie de Rennes (ENSCR), Université de Rennes, UMR CNRS 6226, 11 Allée de Beaulieu, 35700 Rennes, France
| | - Achraf Ghorbal
- Research Unit Advanced Materials, Applied Mechanics, Innovative Processes and Environment, Higher Institute of Applied Sciences and Technology of Gabes (ISSAT), University of Gabes, Gabes 6029, Tunisia
| |
Collapse
|
18
|
de Crane D’Heysselaer S, Parisi G, Lisson M, Bruyère O, Donneau AF, Fontaine S, Gillet L, Bureau F, Darcis G, Thiry E, Ducatez M, Snoeck CJ, Zientara S, Haddad N, Humblet MF, Ludwig-Begall LF, Daube G, Thiry D, Misset B, Lambermont B, Tandjaoui-Lambiotte Y, Zahar JR, Sartor K, Noël C, Saegerman C, Haubruge E. Systematic Review of the Key Factors Influencing the Indoor Airborne Spread of SARS-CoV-2. Pathogens 2023; 12:382. [PMID: 36986304 PMCID: PMC10053454 DOI: 10.3390/pathogens12030382] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/02/2022] [Revised: 02/19/2023] [Accepted: 02/20/2023] [Indexed: 03/06/2023] Open
Abstract
The COVID-19 pandemic due to the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) has been plaguing the world since late 2019/early 2020 and has changed the way we function as a society, halting both economic and social activities worldwide. Classrooms, offices, restaurants, public transport, and other enclosed spaces that typically gather large groups of people indoors, and are considered focal points for the spread of the virus. For society to be able to go "back to normal", it is crucial to keep these places open and functioning. An understanding of the transmission modes occurring in these contexts is essential to set up effective infection control strategies. This understanding was made using a systematic review, according to the Preferred Reporting Items for Systematic reviews and Meta-Analyses statement (PRISMA) 2020 guidelines. We analyze the different parameters influencing airborne transmission indoors, the mathematical models proposed to understand it, and discuss how we can act on these parameters. Methods to judge infection risks through the analysis of the indoor air quality are described. Various mitigation measures are listed, and their efficiency, feasibility, and acceptability are ranked by a panel of experts in the field. Thus, effective ventilation procedures controlled by CO2-monitoring, continued mask wearing, and a strategic control of room occupancy, among other measures, are put forth to enable a safe return to these essential places.
Collapse
Affiliation(s)
| | - Gianni Parisi
- Research Unit in Epidemiology and Risk Analysis Applied to Veterinary Sciences (UREAR-ULiege), FARAH Research Centre, Faculty of Veterinary Medicine, University of Liege, 4000 Liege, Belgium
| | - Maxime Lisson
- TERRA Research Centre, Gembloux Agro-Bio Tech, University of Liège, 5030 Gembloux, Belgium
| | - Olivier Bruyère
- Division of Public Health, Epidemiology and Health Economics, Faculty of Medicine, University of Liège, 4000 Liège, Belgium
| | | | - Sebastien Fontaine
- Institute for Research in Social Sciences (IRSS), Faculty of Social Sciences, University of Liege, 4000 Liège, Belgium
| | - Laurent Gillet
- Immunology-Vaccinology Laboratory, FARAH Research Center, Faculty of Veterinary Medicine, University of Liège, 4000 Liège, Belgium
| | - Fabrice Bureau
- Laboratory of Cellular and Molecular Immunology, GIGA Institute, University of Liege, 4000 Liège, Belgium
| | - Gilles Darcis
- Infectious Diseases Department, Centre Hospitalier Universitaire de Liège, 4000 Liège, Belgium
| | - Etienne Thiry
- Veterinary Virology and Animal Viral Diseases, FARAH Research Centre, Department of Infectious and Parasitic Diseases, Faculty of Veterinary Medicine, University of Liège, 4000 Liège, Belgium
| | - Mariette Ducatez
- IHAP, Université de Toulouse, INRAE, ENVT, 31000 Toulouse, France
| | - Chantal J. Snoeck
- Clinical and Applied Virology Group, Department of Infection and Immunity, Luxembourg Institute of Health, 4354 Esch-sur-Alzette, Luxembourg
| | - Stéphan Zientara
- UMR1161 Virologie, INRAE, Ecole Nationale Vétérinaire d’Alfort, Anses, Université Paris-Est, F-94700 Maisons-Alfort, France
| | - Nadia Haddad
- UMR BIPAR 956, Anses, INRAE, Ecole Nationale Vétérinaire d’Alfort, Université Paris-Est, 94700 Maisons-Alfort, France
| | - Marie-France Humblet
- Department of Occupational Safety and Health, University of Liege, 4000 Liege, Belgium
| | - Louisa F. Ludwig-Begall
- Veterinary Virology and Animal Viral Diseases, FARAH Research Centre, Department of Infectious and Parasitic Diseases, Faculty of Veterinary Medicine, University of Liège, 4000 Liège, Belgium
| | - Georges Daube
- Laboratoire de Microbiologie des Denrées Alimentaires, FARAH Research Center, Faculty of Veterinary Medicine, University of Liège, 4000 Liège, Belgium
| | - Damien Thiry
- Bacteriology, FARAH Research Center, Faculty of Veterinary Medicine, University of Liege, 4000 Liège, Belgium
| | - Benoît Misset
- Service des Soins Intensifs, CHU Sart Tilman, Department des Sciences Cliniques, University of Liège, 4000 Liege, Belgium
| | - Bernard Lambermont
- Service des Soins Intensifs, CHU Sart Tilman, Department des Sciences Cliniques, University of Liège, 4000 Liege, Belgium
| | - Yacine Tandjaoui-Lambiotte
- Laboratoire Hypoxie and Poumon INSERM U1272, Service de Réanimation Médico-Chirurgicale, CHU Avicenne, Assistance Publique-Hôpitaux de Paris, 93000 Bobigny, France
| | | | - Kevin Sartor
- Planification: Energie—Environnement, Département d’Aérospatiale et Mécanique, Systèmes Énergétiques, University of Liège, 4000 Liège, Belgium
| | - Catherine Noël
- Department of Occupational Safety and Health, University of Liege, 4000 Liege, Belgium
| | - Claude Saegerman
- Research Unit in Epidemiology and Risk Analysis Applied to Veterinary Sciences (UREAR-ULiege), FARAH Research Centre, Faculty of Veterinary Medicine, University of Liege, 4000 Liege, Belgium
| | - Eric Haubruge
- TERRA Research Centre, Gembloux Agro-Bio Tech, University of Liège, 5030 Gembloux, Belgium
| |
Collapse
|
19
|
Wang N, Yu J, Yan J, Hua F. Recent advances in antibacterial coatings for orthodontic appliances. Front Bioeng Biotechnol 2023; 11:1093926. [PMID: 36815889 PMCID: PMC9931068 DOI: 10.3389/fbioe.2023.1093926] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/09/2022] [Accepted: 01/18/2023] [Indexed: 02/04/2023] Open
Abstract
In the process of orthodontic treatment, the presence of orthodontic appliances makes it difficult to clean tooth surfaces. This can lead to an increased level of bacterial colonization, resulting in enamel demineralization and periodontal diseases. Considering the large surface area that orthodontic appliances usually have and that they can be in direct contact with bacteria throughout the treatment, modifications in the form of coatings on the surface of orthodontic appliances can be an effective and practical approach to reducing bacterial proliferation and preventing relevant adverse effects. In this mini-review, we discuss various antibacterial coatings which have been applied onto orthodontic appliances in recent 5 years, as well as their antibacterial mechanisms and methods for the preparation of these coatings. From this mini-review, both orthodontists and researchers can get the latest findings in the field of antibacterial coatings onto orthodontic appliances, which is helpful for the decision-making in clinical practice and research activities.
Collapse
Affiliation(s)
- Nannan Wang
- The State Key Laboratory Breeding Base of Basic Science of Stomatology (Hubei-MOST) and Key Laboratory of Oral Biomedicine Ministry of Education, School and Hospital of Stomatology, Wuhan University, Wuhan, China
| | - Jingjing Yu
- The State Key Laboratory Breeding Base of Basic Science of Stomatology (Hubei-MOST) and Key Laboratory of Oral Biomedicine Ministry of Education, School and Hospital of Stomatology, Wuhan University, Wuhan, China
| | - Jiarong Yan
- The State Key Laboratory Breeding Base of Basic Science of Stomatology (Hubei-MOST) and Key Laboratory of Oral Biomedicine Ministry of Education, School and Hospital of Stomatology, Wuhan University, Wuhan, China
| | - Fang Hua
- The State Key Laboratory Breeding Base of Basic Science of Stomatology (Hubei-MOST) and Key Laboratory of Oral Biomedicine Ministry of Education, School and Hospital of Stomatology, Wuhan University, Wuhan, China,Center for Orthodontics and Pediatric Dentistry at Optics Valley Branch, School and Hospital of Stomatology, Wuhan University, Wuhan, China,Center for Evidence-Based Stomatology, School and Hospital of Stomatology, Wuhan University, Wuhan, China,Division of Dentistry, School of Medical Sciences, Faculty of Biology, Medicine and Health, University of Manchester, Manchester, United Kingdom,*Correspondence: Fang Hua,
| |
Collapse
|
20
|
Photo-Fenton and TiO 2 Photocatalytic Inactivation of Model Microorganisms under UV-A; Comparative Efficacy and Optimization. Molecules 2023; 28:molecules28031199. [PMID: 36770868 PMCID: PMC9920570 DOI: 10.3390/molecules28031199] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/09/2022] [Revised: 01/10/2023] [Accepted: 01/20/2023] [Indexed: 01/27/2023] Open
Abstract
Photocatalytic inactivation of pathogens in aqueous waste is gaining increasing attention. Several homogeneous and heterogeneous photocatalytic protocols exist using the Fenton's reagent and TiO2, respectively. A comprehensive study of homogeneous and heterogeneous photocatalysis on a range of microorganisms will significantly establish the most efficient method. Here, we report a comparative study of TiO2- and Fe+3-based photocatalytic inactivation under UV-A of diverse microorganisms, including Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria, bacterial spores (Bacillus stearothermophilus spores) and viruses (MS2). We also present data on the optimization of TiO2 photocatalysis, including optimal catalyst concentration and H2O2 supplementation. Our results indicate that both photo-Fenton and TiO2 could be successfully applied for the management of microbial loads in liquids. Efficient microorganism inactivation is achieved with homogeneous photocatalysis (7 mg/L Fe+3, 100 mg/L H2O2, UV-A) in a shorter processing time compared to heterogeneous photocatalysis (0.5 g/L TiO2, UV-A), whereas similar or shorter processing is required when heterogenous photocatalysis is performed using microorganism-specific optimized TiO2 concentrations and H2O2 supplementation (100 mg/L); higher H2O2 concentrations further enhance the heterogenous photocatalytic inactivation efficiency. Our study provides a template protocol for the design and further application for large-scale photocatalytic approaches to inactivate pathogens in liquid biomedical waste.
Collapse
|
21
|
A Novel High-Energy Vacuum Ultraviolet Light Photofunctionalization Approach for Decomposing Organic Molecules around Titanium. Int J Mol Sci 2023; 24:ijms24031978. [PMID: 36768297 PMCID: PMC9916712 DOI: 10.3390/ijms24031978] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/22/2022] [Revised: 01/01/2023] [Accepted: 01/11/2023] [Indexed: 01/20/2023] Open
Abstract
Titanium undergoes biological aging, represented by increased hydrophobicity and surface accumulation of organic molecules over time, which compromises the osseointegration of dental and orthopedic implants. Here, we evaluated the efficacy of a novel UV light source, 172 nm wavelength vacuum UV (VUV), in decomposing organic molecules around titanium. Methylene blue solution used as a model organic molecule placed in a quartz ampoule with and without titanium specimens was treated with four different UV light sources: (i) ultraviolet C (UVC), (ii) high-energy UVC (HUVC), (iii) proprietary UV (PUV), and (iv) VUV. After one minute of treatment, VUV decomposed over 90% of methylene blue, while there was 3-, 3-, and 8-fold more methylene blue after the HUVC, PUV, and UVC treatments, respectively. In dose-dependency experiments, maximal methylene blue decomposition occurred after one minute of VUV treatment and after 20-30 min of UVC treatment. Rapid and effective VUV-mediated organic decomposition was not influenced by the surface topography of titanium or its alloy and even occurred in the absence of titanium, indicating only a minimal photocatalytic contribution of titanium dioxide to organic decomposition. VUV-mediated but not other light source-mediated methylene blue decomposition was proportional to its concentration. Plastic tubes significantly reduced methylene blue decomposition for all light sources. These results suggest that VUV, in synergy with quartz ampoules, mediates rapid and effective organic decomposition compared with other UV sources. This proof-of-concept study paves the way for rapid and effective VUV-powered photofunctionalization of titanium to overcome biological aging.
Collapse
|
22
|
Negishi N, Yamano R, Hori T, Koura S, Maekawa Y, Sato T. Development of a high-speed bioaerosol elimination system for treatment of indoor air. BUILDING AND ENVIRONMENT 2023; 227:109800. [PMID: 36407015 PMCID: PMC9651995 DOI: 10.1016/j.buildenv.2022.109800] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/22/2022] [Revised: 11/07/2022] [Accepted: 11/08/2022] [Indexed: 06/12/2023]
Abstract
We developed a high-speed filterless airflow multistage photocatalytic elbow aerosol removal system for the treatment of bioaerosols such as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Human-generated bioaerosols that diffuse into indoor spaces are 1-10 μm in size, and their selective and rapid treatment can reduce the risk of SARS-CoV-2 infection. A high-speed airflow is necessary to treat large volumes of indoor air over a short period. The proposed system can be used to eliminate viruses in aerosols by forcibly depositing aerosols in a high-speed airflow onto a photocatalyst placed inside the system through inertial force and turbulent diffusion. Because the main component of the deposited bioaerosol is water, it evaporates after colliding with the photocatalyst, and the nonvolatile virus remains on the photocatalytic channel wall. The residual virus on the photocatalytic channel wall is mineralized via photocatalytic oxidation with UVA-LED irradiation in the channel. When this system was operated in a 4.5 m3 aerosol chamber, over 99.8% aerosols in the size range of 1-10 μm were removed within 15 min. The system continued delivering such performance with the continuous introduction of aerosols. Because this system exhibits excellent aerosol removal ability at a flow velocity of 5 m/s or higher, it is more suitable than other reactive air purification systems for treating large-volume spaces.
Collapse
Key Words
- AOP, advanced oxidation process
- Bioaerosol
- CFD, computational fluid dynamics
- COVID-19, coronavirus disease 2019
- DES, detached eddy simulation
- HEPA, high-efficiency particulate absorbing
- ISO, International Standard Organization
- Indoor air
- LES, Large eddy simulation
- RANS, Reynolds-averaged Navier–Stokes
- SARS-CoV-2
- SARS-CoV-2, severe acute respiratory syndrome coronavirus 2
- SCDLP, soya casein-digested lecithin polysorbate
- TiO2 photocatalyst
- UV, ultraviolet
- UVA, ultraviolet-A
- UVC, ultraviolet-C
- Windspeed
Collapse
Affiliation(s)
- Nobuaki Negishi
- Environment Management Research Institute, National Institute of Advanced Industrial Science and Technology, 1-16 Onogawa, Tsukuba, 305-8569, Japan
| | - Ryo Yamano
- Department of Applied Chemistry, Chiba Institute of Technology, 2-17-1 Tsudanuma, Narashino, 275-0016, Japan
| | - Tomoko Hori
- Environment Management Research Institute, National Institute of Advanced Industrial Science and Technology, 1-16 Onogawa, Tsukuba, 305-8569, Japan
| | - Setsuko Koura
- Department of Applied Chemistry, Chiba Institute of Technology, 2-17-1 Tsudanuma, Narashino, 275-0016, Japan
| | - Yuji Maekawa
- Kamaishi Electric Machinery Factory Co. Ltd., 9-171-4 Kasshi-cho, Kamaishi, 026-0055, Japan
| | - Taro Sato
- Kamaishi Electric Machinery Factory Co. Ltd., 9-171-4 Kasshi-cho, Kamaishi, 026-0055, Japan
| |
Collapse
|
23
|
Ratliff KM, Oudejans L, Archer J, Calfee W, Gilberry JU, Hook DA, Schoppman WE, Yaga RW, Brooks L, Ryan S. Large-scale evaluation of microorganism inactivation by bipolar ionization and photocatalytic devices. BUILDING AND ENVIRONMENT 2023; 227:109804. [PMID: 36407013 PMCID: PMC9652099 DOI: 10.1016/j.buildenv.2022.109804] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/18/2022] [Revised: 10/20/2022] [Accepted: 11/08/2022] [Indexed: 06/16/2023]
Abstract
The COVID-19 pandemic has raised awareness in the spread of disease via airborne transmission. As a result, there has been increasing interest in technologies that claim to reduce concentrations of airborne pathogens in indoor environments. The efficacy of many of these emerging technologies is not fully understood, and the testing that has been done is often conducted at a small scale and not representative of applied settings. There is currently no standard test method for evaluating air treatment technologies, making it difficult to compare results across studies or technology types. Here, a consistent testing approach in an operational-scale test chamber with a mock recirculating heating, ventilation, and air conditioning (HVAC) system was used to evaluate the efficacy of bipolar ionization and photocatalytic devices against the non-enveloped bacteriophage MS2 in the air and on surfaces. Statistically significant differences between replicate sets of technology tests and control tests (without technologies active) are apparent after 1 h, ranging to a maximum of 0.88 log10 reduction for the bipolar ionization tests and 1.8 log10 reduction for the photocatalytic device tests. It should be noted that ozone concentrations were elevated above background concentrations in the test chamber during the photocatalytic device testing. No significant differences were observed between control and technology tests in terms of the amount of MS2 deposited or inactivated on surfaces during testing. A standardized, large-scale testing approach, with replicate testing and time-matched control conditions, is necessary for contextualizing laboratory efficacy results, translating them to real-world conditions, and for facilitating technology comparisons.
Collapse
Affiliation(s)
- Katherine M Ratliff
- Center for Environmental Solutions and Emergency Response, Office of Research and Development, U.S. Environmental Protection Agency, Research Triangle Park, NC, USA
| | - Lukas Oudejans
- Center for Environmental Solutions and Emergency Response, Office of Research and Development, U.S. Environmental Protection Agency, Research Triangle Park, NC, USA
| | - John Archer
- Center for Environmental Solutions and Emergency Response, Office of Research and Development, U.S. Environmental Protection Agency, Research Triangle Park, NC, USA
| | - Worth Calfee
- Center for Environmental Solutions and Emergency Response, Office of Research and Development, U.S. Environmental Protection Agency, Research Triangle Park, NC, USA
| | | | | | | | - Robert W Yaga
- Jacobs Technology Inc., Research Triangle Park, NC, USA
| | - Lance Brooks
- Center for Environmental Solutions and Emergency Response, Office of Research and Development, U.S. Environmental Protection Agency, Research Triangle Park, NC, USA
| | - Shawn Ryan
- Center for Environmental Solutions and Emergency Response, Office of Research and Development, U.S. Environmental Protection Agency, Research Triangle Park, NC, USA
| |
Collapse
|
24
|
Ismail AA, Al-Hajji L, Azad I, Al-Yaqoot A, Habibi N, Alseidi M, Ahmed S. Self-cleaning application of mesoporous ZnO, TiO2 and Fe2O3 films with the accommodation of silver nanoparticles for antibacterial activity. J Taiwan Inst Chem Eng 2023. [DOI: 10.1016/j.jtice.2022.104627] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
|
25
|
Ghosal K. Tackling COVID-19 Using Antiviral Nanocoating's-Recent Progress and Future Challenges. PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION : MEASUREMENT AND DESCRIPTION OF PARTICLE PROPERTIES AND BEHAVIOR IN POWDERS AND OTHER DISPERSE SYSTEMS 2023; 40:2200154. [PMID: 36711425 PMCID: PMC9874835 DOI: 10.1002/ppsc.202200154] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/24/2022] [Revised: 09/24/2022] [Indexed: 05/05/2023]
Abstract
In the current situation of the global coronavirus disease 2019 (COVID-19) pandemic, there is a worldwide demand for the protection of regular handling surfaces from viral transmission to restrict the spread of COVID-19 infection. To tackle this challenge, researchers and scientists are continuously working on novel antiviral nanocoatings to make various substrates capable of arresting the spread of such pathogens. These nanocoatings systems include metal/metal oxide nanoparticles, electrospun antiviral polymer nanofibers, antiviral polymer nanoparticles, graphene family nanomaterials, and etched nanostructures. The antiviral mechanism of these systems involves depletion of the spike glycoprotein that anchors to surfaces by the nanocoating and makes the spike glycoprotein and viral nucleotides inactive; however, the nature of the interaction between the spike proteins and virus depends on the type of nanostructure and a surface charge over the coating surface. In this article, the current scenario of COVID-19 and how it can be tackled using antiviral nanocoatings from the further transmission of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), along with their different mode of action, are discussed. Additionally, it is also highlighted different types of nanocoatings developed for various substrates to encounter transmission of SARS-CoV-2, future research areas along with the current challenges related to it, and how these challenges can be resolved.
Collapse
Affiliation(s)
- Krishanu Ghosal
- Research & Development LaboratoryShalimar Paints LimitedNashikMaharashtra422403India
- The Wolfson Faculty of Chemical EngineeringTechnion‐Israel Institute of TechnologyHaifa3200003Israel
| |
Collapse
|
26
|
Decomposing Organic Molecules on Titanium with Vacuum Ultraviolet Light for Effective and Rapid Photofunctionalization. J Funct Biomater 2022; 14:jfb14010011. [PMID: 36662058 PMCID: PMC9861116 DOI: 10.3390/jfb14010011] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/02/2022] [Revised: 12/19/2022] [Accepted: 12/22/2022] [Indexed: 12/24/2022] Open
Abstract
Ultraviolet (UV) photofunctionalization counteracts the biological aging of titanium to increase the bioactivity and osseointegration of titanium implants. However, UV photofunctionalization currently requires long treatment times of between 12 min and 48 h, precluding routine clinical use. Here, we tested the ability of a novel, xenon excimer lamp emitting 172 nm vacuum UV (VUV) to decompose organic molecules coated on titanium as a surrogate of photofunctionalization. Methylene blue as a model organic molecule was coated on grade 4 commercially pure titanium and treated with four UV light sources: (i) ultraviolet C (UVC), (ii) high-energy UVC (HUVC), (iii) proprietary UV (PUV), and (iv) VUV. After one minute of treatment, VUV decomposed 57% of methylene blue compared with 2%, 36%, and 42% for UVC, HUVC, and PUV, respectively. UV dose-dependency testing revealed maximal methylene blue decomposition with VUV within one minute. Equivalent decomposition was observed on grade 5 titanium alloy specimens, and placing titanium specimens in quartz ampoules did not compromise efficacy. Methylene blue was decomposed even on polymethyl methacrylate acrylic specimens at 20-25% lower efficiency than on titanium specimens, indicating a relatively small contribution of titanium dioxide-mediated photocatalytic decomposition to the total decomposition. Load-testing revealed that VUV maintained high efficacy of methylene blue decomposition regardless of the coating density, whereas other UV light sources showed low efficacy with thin coatings and plateauing efficacy with thicker coatings. This study provides foundational data on rapid and efficient VUV-mediated organic decomposition on titanium. In synergy with quartz ampoules used as containers, VUV has the potential to overcome current technical challenges hampering the clinical application of UV photofunctionalization.
Collapse
|
27
|
Kongsomros S, Pongsakul N, Panachan J, Khowawisetsut L, Somkird J, Sangma C, Kanjanapruthipong T, Wongtrakoongate P, Chairoungdua A, Pattanapanyasat K, Newburg DS, Morrow AL, Hongeng S, Thitithanyanont A, Chutipongtanate S. Comparison of viral inactivation methods on the characteristics of extracellular vesicles from SARS-CoV-2 infected human lung epithelial cells. J Extracell Vesicles 2022; 11:e12291. [PMID: 36468940 PMCID: PMC9721205 DOI: 10.1002/jev2.12291] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/06/2022] [Revised: 11/15/2022] [Accepted: 11/23/2022] [Indexed: 12/12/2022] Open
Abstract
The interaction of SARS-CoV-2 infection with extracellular vesicles (EVs) is of particular interest at the moment. Studying SARS-CoV-2 contaminated-EV isolates in instruments located outside of the biosafety level-3 (BSL-3) environment requires knowing how viral inactivation methods affect the structure and function of extracellular vesicles (EVs). Therefore, three common viral inactivation methods, ultraviolet-C (UVC; 1350 mJ/cm2 ), β-propiolactone (BPL; 0.005%), heat (56°C, 45 min) were performed on defined EV particles and their proteins, RNAs, and function. Small EVs were isolated from the supernatant of SARS-CoV-2-infected human lung epithelial Calu-3 cells by stepwise centrifugation, ultrafiltration and qEV size-exclusion chromatography. The EV isolates contained SARS-CoV-2. UVC, BPL and heat completely abolished SARS-CoV-2 infectivity of the contaminated EVs. Particle detection by electron microscopy and nanoparticle tracking was less affected by UVC and BPL than heat treatment. Western blot analysis of EV markers was not affected by any of these three methods. UVC reduced SARS-CoV-2 spike detectability by quantitative RT-PCR and slightly altered EV-derived β-actin detection. Fibroblast migration-wound healing activity of the SARS-CoV-2 contaminated-EV isolate was only retained after UVC treatment. In conclusion, specific viral inactivation methods are compatible with specific measures in SARS-CoV-2 contaminated-EV isolates. UVC treatment seems preferable for studying functions of EVs released from SARS-CoV-2 infected cells.
Collapse
Affiliation(s)
- Supasek Kongsomros
- Chakri Naruebodindra Medical Institute, Faculty of Medicine Ramathibodi HospitalMahidol UniversitySamut PrakanThailand
- Pediatric Translational Research Unit, Department of PediatricsFaculty of Medicine Ramathibodi Hospital, Mahidol UniversityBangkokThailand
- Department of Microbiology, Faculty of ScienceMahidol UniversityBangkokThailand
| | - Nutkridta Pongsakul
- Pediatric Translational Research Unit, Department of PediatricsFaculty of Medicine Ramathibodi Hospital, Mahidol UniversityBangkokThailand
| | - Jirawan Panachan
- Division of Hematology and Oncology, Department of Pediatrics, Faculty of Medicine Ramathibodi HospitalMahidol UniversityBangkokThailand
| | - Ladawan Khowawisetsut
- Department of Parasitology, Faculty of Medicine Siriraj HospitalMahidol UniversityBangkokThailand
| | - Jinjuta Somkird
- Department of Parasitology, Faculty of Medicine Siriraj HospitalMahidol UniversityBangkokThailand
| | - Chak Sangma
- Department of Chemistry, Faculty of ScienceKasetsart UniversityBangkokThailand
| | | | | | - Arthit Chairoungdua
- Department of Biochemistry, Faculty of ScienceMahidol UniversityBangkokThailand
| | - Kovit Pattanapanyasat
- Center of Excellence for Microparticle and Exosome in Diseases, Research DepartmentFaculty of Medicine Siriraj Hospital, Mahidol UniversityBangkokThailand
| | - David S. Newburg
- Division of Epidemiology, Department of Environmental and Public Health SciencesUniversity of Cincinnati College of MedicineCincinnatiOhioUSA
| | - Ardythe L. Morrow
- Division of Epidemiology, Department of Environmental and Public Health SciencesUniversity of Cincinnati College of MedicineCincinnatiOhioUSA
- Division of Infectious Diseases, Department of PediatricsCincinnati Children's Hospital Medical CenterCincinnatiOhioUSA
| | - Suradej Hongeng
- Division of Hematology and Oncology, Department of Pediatrics, Faculty of Medicine Ramathibodi HospitalMahidol UniversityBangkokThailand
| | | | - Somchai Chutipongtanate
- Chakri Naruebodindra Medical Institute, Faculty of Medicine Ramathibodi HospitalMahidol UniversitySamut PrakanThailand
- Pediatric Translational Research Unit, Department of PediatricsFaculty of Medicine Ramathibodi Hospital, Mahidol UniversityBangkokThailand
- Division of Epidemiology, Department of Environmental and Public Health SciencesUniversity of Cincinnati College of MedicineCincinnatiOhioUSA
| |
Collapse
|
28
|
Dhabarde N, Khaiboullina S, Uppal T, Adhikari K, Verma SC, Subramanian VR. Inactivation of SARS-CoV-2 and Other Human Coronaviruses Aided by Photocatalytic One-Dimensional Titania Nanotube Films as a Self-Disinfecting Surface. ACS APPLIED MATERIALS & INTERFACES 2022; 14:50463-50474. [PMID: 36335476 DOI: 10.1021/acsami.2c03226] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
SARS-CoV-2 and its variants that continue to emerge have necessitated the implementation of effective disinfection strategies. Developing self-disinfecting surfaces can be a potential route for reducing fomite transmissions of infectious viruses. We show the effectiveness of TiO2 nanotubes (T_NTs) on photocatalytic inactivation of human coronavirus, HCoV-OC43, as well as SARS-CoV-2. T_NTs were synthesized by the anodization process, and their impact on photocatalytic inactivation was evaluated by the detection of residual viral genome copies (quantitative real-time quantitative reverse transcription polymerase chain reaction) and infectious viruses (infectivity assays). T_NTs with different structural morphologies, wall thicknesses, diameters, and lengths were prepared by varying the time and applied potential during anodization. The virucidal efficacy was tested under different UV-C exposure times to understand the photocatalytic reaction's kinetics. We showed that the T_NT presence boosts the inactivation process and demonstrated complete inactivation of SARS-CoV-2 as well as HCoV-OC43 within 30 s of UV-C illumination. The remarkable cyclic stability of these T_NTs was revealed through a reusability experiment. The spectroscopic and electrochemical analyses have been reported to correlate and quantify the effects of the physical features of T_NT with photoactivity. We anticipate that the proposed one-dimensional T_NT will be applicable for studying the surface inactivation of other coronaviruses including SARS-CoV-2 variants due to similarities in their genomic structure.
Collapse
Affiliation(s)
- Nikhil Dhabarde
- Chemical and Materials Engineering Department, University of Nevada, LME 309, MS 388, Reno, Nevada 89557, United States
| | - Svetlana Khaiboullina
- Department of Microbiology and Immunology, University of Nevada, Reno School of Medicine, 1664 N Virginia Street, Reno, Nevada 89557, United States
| | - Timsy Uppal
- Department of Microbiology and Immunology, University of Nevada, Reno School of Medicine, 1664 N Virginia Street, Reno, Nevada 89557, United States
| | - Kabita Adhikari
- Department of Microbiology and Immunology, University of Nevada, Reno School of Medicine, 1664 N Virginia Street, Reno, Nevada 89557, United States
| | - Subhash C Verma
- Department of Microbiology and Immunology, University of Nevada, Reno School of Medicine, 1664 N Virginia Street, Reno, Nevada 89557, United States
| | - Vaidyanathan Ravi Subramanian
- Chemical and Materials Engineering Department, University of Nevada, LME 309, MS 388, Reno, Nevada 89557, United States
| |
Collapse
|
29
|
Baek KH, Jang D, Kim T, Ryoo S, Yang JY, Park JS, Kim E, Lee S. Polyimide Surface Dielectric Barrier Discharge for Inactivation of SARS-CoV-2 Trapped in a Polypropylene Melt-Blown Filter. ACS APPLIED POLYMER MATERIALS 2022; 4:8127-8135. [PMID: 37552736 PMCID: PMC9612591 DOI: 10.1021/acsapm.2c01086] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 06/24/2022] [Accepted: 10/12/2022] [Indexed: 08/10/2023]
Abstract
Surface dielectric barrier discharge (SDBD) was used to inactivate the infectious severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) trapped in a polypropylene (PP) melt-blown filter. We used a dielectric barrier made of polyimide films with hexagonal holes through which air flowed. In a cylindrical wind tunnel, the SDBD device supplied reactive oxygen species such as ozone to the SARS-CoV-2 trapped in the PP filter. A plaque assay showed that SDBD at an ozone concentration of approximately 51.6 ppm and exposure time of 30 min induced more than 99.78% reduction for filter-adhered SARS-CoV-2. A carbon catalyst after SDBD effectively reduced ozone exhaust below 0.05 ppm. The combination of SDBD, PP filter, and catalyst could be a promising way to decrease the risk of secondary infection due to indoor air purifiers.
Collapse
Affiliation(s)
- Ki Ho Baek
- Department of Nano-Bio Convergence, Korea
Institute of Materials Science, Changwon51508,
Korea
| | - Donghwan Jang
- Clinical Research Centre, Masan National
Tuberculosis Hospital, Changwon51755, Korea
| | - Taeyoon Kim
- Clinical Research Centre, Masan National
Tuberculosis Hospital, Changwon51755, Korea
| | - Sungweon Ryoo
- Clinical Research Centre, Masan National
Tuberculosis Hospital, Changwon51755, Korea
| | - Jun-Yeong Yang
- Department of Nano-Bio Convergence, Korea
Institute of Materials Science, Changwon51508,
Korea
| | - Jun Soon Park
- VALS Innovation, 255
Horyeong-ro, Seocho-gu, Seoul06653, Korea
| | - Eunggon Kim
- VALS Innovation, 255
Horyeong-ro, Seocho-gu, Seoul06653, Korea
| | - Seunghun Lee
- Department of Nano-Bio Convergence, Korea
Institute of Materials Science, Changwon51508,
Korea
| |
Collapse
|
30
|
Yarahmadi R, Soleimani-Alyar S, Darvishi MM. Inactivation of airborne SARS-Co-V2 using NTP-UVGI hybrid process. INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY : IJEST 2022; 20:209-218. [PMID: 36313941 PMCID: PMC9593994 DOI: 10.1007/s13762-022-04399-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 01/15/2022] [Revised: 04/29/2022] [Accepted: 07/11/2022] [Indexed: 06/16/2023]
Abstract
Indoor environments such as healthcare centers are known as one of the key centers in the outbreak of viral infectious diseases. In the present study, the pathogenic agents' treatment system (PATS) was designed by the combination of non-thermal plasma (NTP) with the ultraviolet germicidal irradiation (UVGI) processes. Then, the treatment efficiency of PATS was measured for the "SARS-Co-V2." The exhaled air of the confirmed case of "COVID-19" was considered as the viral source of "SARS-Co-V2" and directed to the upstream of PATS. The treatment process was done by passing directed air through two steps of treatment (NTP and UVGI). The treatment efficiency of PATS was measured by sampling at the sampling points (before and after the treatment process). According to the energy emission pattern (corona discharge, UV rays) in the designed system, during two steps, the high efficiency of treatment for the collected pathogens was achieved. Based on the real-time polymerase chain reaction (RT-PCR) results, the CT value was lower than 29 (CTs < 29), and after the treatment using PATS was upper than 40 (CTs > 40) confirming the highest removal efficiency of "SARS-Co-V2." Also, the treatment efficiency of each reactor in individual operation was at the optimum level. The findings suggested, the present PATS may eliminate the viral pathogens with hospital sources and also, be applicable in the other intensive care unit (ICU) wards with the same risk thus, significantly reducing the possible exposure risk of healthcare and sick companions, and preventing the outbreak of infectious diseases.
Collapse
Affiliation(s)
- R. Yarahmadi
- Air Pollution Research Center, Department of Occupational Health, Iran University of Medical Sciences, Tehran, Iran
| | - S. Soleimani-Alyar
- Air Pollution Research Center, Iran University of Medical Sciences, Tehran, Iran
| | - M.-M. Darvishi
- Department of Mechanical Engineering, Payame Noor University, Tehran, Iran
| |
Collapse
|
31
|
Inactivation and Degradation of Influenza a Virus on the Surface of Photoactive Self-Cleaning Cotton Fabric Functionalized with Nanocrystalline TiO2. Catalysts 2022. [DOI: 10.3390/catal12111298] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022] Open
Abstract
Chemical modification of cotton-rich fabrics with TiO2 nanoparticles results in photoactive self-cleaning textiles, which can provide, under UV or solar radiation, complete oxidation of low-molecular compounds, degradation of supramolecular structures, and inactivation of microorganisms due to the photocatalytic effect. In this paper, we describe, based on the example of influenza A (H1N1) virus, a photoinduced antiviral effect of cotton fabric functionalized with nanocrystalline TiO2. Fast inactivation of influenza virus occurs on the irradiated surface of photoactive fabric due to adsorption and photocatalytic degradation. The TiO2 component in the prepared fabric increases the adsorption effect compared to initial cotton due to a high specific area of TiO2 nanocrystallites. Long-term irradiation leads to destruction of all virion structures to the point of RNA molecules. In contrast to pristine cotton, no virus RNA is detected using the polymerase chain reaction (PCR) technique after long-term irradiation of photoactive fabric. The results of this study underline the potential of photoactive self-cleaning fabrics for application in air purification systems and personal protective clothes to provide permanent protection of people against harmful chemical and biological pollutants.
Collapse
|
32
|
Prakash J, Krishna SBN, Kumar P, Kumar V, Ghosh KS, Swart HC, Bellucci S, Cho J. Recent Advances on Metal Oxide Based Nano-Photocatalysts as Potential Antibacterial and Antiviral Agents. Catalysts 2022; 12:1047. [DOI: 10.3390/catal12091047] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2023] Open
Abstract
Photocatalysis, a unique process that occurs in the presence of light radiation, can potentially be utilized to control environmental pollution, and improve the health of society. Photocatalytic removal, or disinfection, of chemical and biological species has been known for decades; however, its extension to indoor environments in public places has always been challenging. Many efforts have been made in this direction in the last two–three years since the COVID-19 pandemic started. Furthermore, the development of efficient photocatalytic nanomaterials through modifications to improve their photoactivity under ambient conditions for fighting with such a pandemic situation is a high research priority. In recent years, several metal oxides-based nano-photocatalysts have been designed to work efficiently in outdoor and indoor environments for the photocatalytic disinfection of biological species. The present review briefly discusses the advances made in the last two to three years for photocatalytic viral and bacterial disinfections. Moreover, emphasis has been given to the tailoring of such nano-photocatalysts in disinfecting surfaces, air, and water to stop viral/bacterial infection in the indoor environment. The role of such nano-photocatalysts in the photocatalytic disinfection of COVID-19 has also been highlighted with their future applicability in controlling such pandemics.
Collapse
|
33
|
Caianelo M, Espíndola JC, Diniz V, Spina M, Rodrigues-Silva C, Roberto Guimarães J. Gatifloxacin photocatalytic degradation in different water matrices: Antimicrobial activity and acute toxicity reduction. J Photochem Photobiol A Chem 2022. [DOI: 10.1016/j.jphotochem.2022.113973] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
|
34
|
Matsuura R, Maeda K, Hagiwara K, Mori Y, Kitamura T, Matsumoto Y, Aida Y. WO3 Photocatalyst Containing Copper Inactivates SARS-CoV-2 Pango Lineage A and Omicron BA.2 Variant in Visible Light and in Darkness. Pathogens 2022; 11:pathogens11080922. [PMID: 36015043 PMCID: PMC9415178 DOI: 10.3390/pathogens11080922] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/20/2022] [Revised: 08/08/2022] [Accepted: 08/13/2022] [Indexed: 01/14/2023] Open
Abstract
Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is the causative agent of coronavirus disease 2019, which has been a global pandemic. Since SARS-CoV-2 is transmitted through contaminated surfaces and aerosols, environmental disinfection is important to block the spread of the virus. Photocatalysts are attractive tools for virus inactivation and are widely used as air purifiers and coating materials. However, photocatalysts are inactive in the dark, and some of them need to be excited with light of a specific wavelength. Therefore, photocatalysts that can effectively inactivate SARS-CoV-2 in indoor environments are needed. Here, we show that a WO3 photocatalyst containing copper inactivated the SARS-CoV-2 WK-521 strain (Pango lineage A) upon irradiation with white light in a time- and concentration-dependent manner. Additionally, this photocatalyst also inactivated SARS-CoV-2 in dark conditions due to the antiviral effect of copper. Furthermore, this photocatalyst inactivated not only the WK-521 strain but also the Omicron variant BA.2. These results indicate that the WO3 photocatalyst containing copper can inactivate indoor SARS-CoV-2 regardless of the variant, in visible light or darkness, making it an effective tool for controlling the spread of SARS-CoV-2.
Collapse
Affiliation(s)
- Ryosuke Matsuura
- Laboratory of Global Infectious Diseases Control Science, Graduate School of Agricultural and Life Sciences, The University of Tokyo, 1-1-1 Yayoi, Bunkyo-ku, Tokyo 113-8657, Japan
- Department of Veterinary Science, National Institute of Infectious Diseases, Toyama, Shinjuku-ku, Tokyo 162-8640, Japan
| | - Ken Maeda
- Department of Veterinary Science, National Institute of Infectious Diseases, Toyama, Shinjuku-ku, Tokyo 162-8640, Japan
| | - Kyoji Hagiwara
- Advintage Co., Ltd., 1-1-1-705 Ebisuminami, Shibuya-ku, Tokyo 150-0022, Japan
| | - Yosuke Mori
- Advintage Co., Ltd., 1-1-1-705 Ebisuminami, Shibuya-ku, Tokyo 150-0022, Japan
| | - Toru Kitamura
- Centre for Advanced Materials and Energy Sciences, Universiti Brunei Darussalam, Gadong BE1410, Brunei
| | - Yasunobu Matsumoto
- Laboratory of Global Infectious Diseases Control Science, Graduate School of Agricultural and Life Sciences, The University of Tokyo, 1-1-1 Yayoi, Bunkyo-ku, Tokyo 113-8657, Japan
- Laboratory of Global Animal Resource Science, Graduate School of Agricultural and Life Sciences, The University of Tokyo, 1-1-1 Yayoi, Bunkyo-ku, Tokyo 113-8657, Japan
| | - Yoko Aida
- Laboratory of Global Infectious Diseases Control Science, Graduate School of Agricultural and Life Sciences, The University of Tokyo, 1-1-1 Yayoi, Bunkyo-ku, Tokyo 113-8657, Japan
- Department of Veterinary Science, National Institute of Infectious Diseases, Toyama, Shinjuku-ku, Tokyo 162-8640, Japan
- Correspondence:
| |
Collapse
|
35
|
Motility Suppression and Trapping Bacteria by ZnO Nanostructures. CRYSTALS 2022. [DOI: 10.3390/cryst12081027] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
Regulating the swimming motility of bacteria near surfaces is essential to suppress or avoid bacterial contamination and infection in catheters and medical devices with wall surfaces. However, the motility of bacteria near walls strongly depends on the combination of the local physicochemical properties of the surfaces. To unravel how nanostructures and their local chemical microenvironment dynamically affect the bacterial motility near surfaces, here, we directly visualize the bacterial swimming and systematically analyze the motility of Escherichia coli swimming on ZnO nanoparticle films and nanowire arrays with further ultraviolet irradiation. The results show that the ZnO nanowire arrays reduce the swimming motility, thus significantly enhancing the trapping ability for motile bacteria. Additionally, thanks to the wide bandgap nature of a ZnO semiconductor, the ultraviolet irradiation rapidly reduces the bacteria locomotion due to the hydroxyl and singlet oxygen produced by the photodynamic effects of ZnO nanowire arrays in an aqueous solution. The findings quantitatively reveal how the combination of geometrical nanostructured surfaces and local tuning of the steric microenvironment are able to regulate the motility of swimming bacteria and suggest the efficient inhibition of bacterial translocation and infection by nanostructured coatings.
Collapse
|
36
|
TiO2/Karaya Composite for Photoinactivation of Bacteria. MATERIALS 2022; 15:ma15134559. [PMID: 35806684 PMCID: PMC9267801 DOI: 10.3390/ma15134559] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/01/2022] [Revised: 06/20/2022] [Accepted: 06/21/2022] [Indexed: 12/26/2022]
Abstract
TiO2/Karaya composite was synthesized by the sol-gel method for the photoinactivation of pathogens. This is the first time that we have reported this composite for an antimicrobial approach. The structure, morphology, and optical properties were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-rays (EDS), Fourier transform infrared spectroscopy (FTIR), and diffuse reflectance, and the surface area was characterized by the BET method. The XRD and EDS results showed that the TiO2/Karaya composite was successfully stabilized by the crystal structure and pore diameter distribution, indicating a composite of mesoporous nature. Furthermore, antibacterial experiments showed that the TiO2/Karaya composite under light was able to photoinactivate bacteria. Therefore, the composite is a promising candidate for inhibiting the growth of bacteria.
Collapse
|
37
|
Characteristics of Doped TiO 2 Nanoparticle Photocatalysts Prepared by the Rotten Egg White. MATERIALS 2022; 15:ma15124231. [PMID: 35744290 PMCID: PMC9229685 DOI: 10.3390/ma15124231] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/12/2022] [Revised: 06/07/2022] [Accepted: 06/09/2022] [Indexed: 12/04/2022]
Abstract
In this study, expired egg white was used as a template, and a sol–gel method was employed to prepare pure-phase TiO2 nano-powder and mixed-phase powders doped with NaF and NaI. The influences of different calcination temperatures, doping elements, and doping amounts during the preparation process on the photocatalytic performance and activity of the prepared TiO2 powders were studied. The results of the experiments showed that the F-doped TiO2 had the highest photocatalytic activity when the doping amount was 1.2%, as examined by EDS, where the sintering temperature was 500 °C. F-doped TiO2 nanoparticles were also synthesized by the sol–gel method using tetrabutyl titanate and NaF mixed with expired egg white protein as the precursor. The F-TiO2 photocatalyst was characterized using FE-SEM, HR-TEM, EDS, XPS, and UV-Vis, and the photocatalytic activity was evaluated by photodegradation of methylene blue under visible light. The results showed that doping with F reduced the energy band gap (3.04 eV) of TiO2, thereby increasing the photocatalytic activity in the visible-light region. The visible-light wavelength range and photocatalytic activity of the catalyst were also affected by the doping amount.
Collapse
|
38
|
Vuerich R, Martinelli V, Vodret S, Bertani I, Carletti T, Zentilin L, Venturi V, Marcello A, Zacchigna S. A new laser device for ultra-rapid and sustainable aerosol sterilization. ENVIRONMENT INTERNATIONAL 2022; 164:107272. [PMID: 35526297 PMCID: PMC9060718 DOI: 10.1016/j.envint.2022.107272] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 03/23/2022] [Revised: 04/27/2022] [Accepted: 04/27/2022] [Indexed: 06/14/2023]
Abstract
The current COVID-19 pandemic has highlighted the importance of aerosol-based transmission of human pathogens; this therefore calls for novel medical devices which are able to sterilize contaminated aerosols. Here we describe a new laser device able to sterilize droplets containing either viruses or bacteria. Using engineered viral particles, we determined the 10,600 nm wavelength as the most efficient and exploitable laser source to be manufactured in a commercial device. Given the lack of existing working models to reproduce a human aerosol containing living microbial particles, we developed a new system mimicking human droplet formation and preserving bacterial and viral viability. This evidenced the efficacy of 10,600 nm laser light to kill two aerosol transmitted human pathogens, Legionella pneumophila and SARS-CoV-2. The minimal exposure time of <15 ms was required for the inactivation of over 99% pathogens in the aerosol; this is a key element in the design of a device that is safe and can be used in preventing inter-individual transmission. This represents a major advantage over existing devices, which mainly aim at either purifying incoming air by filters or sterilizing solid surfaces, which are not the major transmission routes for airborne communicable diseases.
Collapse
Affiliation(s)
- Roman Vuerich
- Cardiovascular Biology Laboratory, International Centre for Genetic Engineering and Biotechnology (ICGEB), 34149 Trieste, Italy; Department of Life Sciences, University of Trieste, 34127 Trieste, Italy
| | | | - Simone Vodret
- Cardiovascular Biology Laboratory, International Centre for Genetic Engineering and Biotechnology (ICGEB), 34149 Trieste, Italy
| | - Iris Bertani
- Laboratory: Bacteriology Laboratory, International Centre for Genetic Engineering and Biotechnology (ICGEB), 34149 Trieste, Italy
| | - Tea Carletti
- Molecular Virology Laboratory, International Centre for Genetic Engineering and Biotechnology (ICGEB), 34149 Trieste, Italy
| | - Lorena Zentilin
- Molecular Medicine Laboratory, International Centre for Genetic Engineering and Biotechnology (ICGEB), 34149 Trieste, Italy
| | - Vittorio Venturi
- Laboratory: Bacteriology Laboratory, International Centre for Genetic Engineering and Biotechnology (ICGEB), 34149 Trieste, Italy
| | - Alessandro Marcello
- Molecular Virology Laboratory, International Centre for Genetic Engineering and Biotechnology (ICGEB), 34149 Trieste, Italy
| | - Serena Zacchigna
- Cardiovascular Biology Laboratory, International Centre for Genetic Engineering and Biotechnology (ICGEB), 34149 Trieste, Italy; Department of Medical, Surgical and Health Sciences, University of Trieste, 34127 Trieste, Italy. https://www.icgeb.org/cardiovascular-biology/
| |
Collapse
|
39
|
Photoelectrochemical oxidation assisted air purifiers; perspective as potential tools to control indoor SARS-CoV-2 Exposure. APPLIED SURFACE SCIENCE ADVANCES 2022; 9:100236. [PMCID: PMC8939627 DOI: 10.1016/j.apsadv.2022.100236] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/29/2022] [Revised: 03/11/2022] [Accepted: 03/11/2022] [Indexed: 06/16/2023]
Abstract
Coronavirus diseases 2019 (COVID-19), a viral infection pandemic, arises due to easy human-to-human transmission of severe acute respiratory syndrome coronavirus (SARS-CoV-2). The SARS-CoV-2 causes severe respiratory disorders and other life-threatening diseases (during/post-infection) such as black mold disease, diabetes, cardiovascular, and neurological disorders/diseases. COVID-19 infection emerged challenging to control as SARS-CoV-2 transmits through respiratory droplets (> 10 µm size range), aerosols (< 5 µm), airborne, and particulate matter (PM1.0 PM2.5 and PM10.0). SARS-CoV-2 is more infective in indoor premises due to aerodynamics where droplets, aerosols, and PM1.0/2.5/10.0 float for a longer time and distance leading to a higher probability of it entering upper and lower respiratory tracts. To avoid human-to-human transmission, it is essential to trap and destroy SARS-CoV-2 from the air and provide virus-free air that will significantly reduce indoor viral exposure concerns. In this process, an efficient nano-enable photoelectrochemical oxidation (PECO, a destructive approach to neutralize bio-organism) assisted air purification is undoubtedly a good technological choice. This technical perspective explores the role of PECO-assisted Air-Purifiers (i.e., Molekule as a focus example for proof-of-concept) to trap and destroy indoor microorganisms (bacteria and viruses including Coronaviruses), molds, and allergens, and other indoor air pollutants, such as volatile organic compounds (VOCs) and PM1.0/2.5/10.0. It is observed through various standard and non-standard tests that stimuli-responsive nanomaterials coated filter technology traps and destroys microbial particles. Due to technological advancements according to premises requirements and high-performance desired outcomes, Molekule air purifiers, Air Pro Air -Rx, Air Mini, and Air Mini+, have received Food and Drug Administration (FDA) clearance as a Class II medical device for the destruction of bacteria and viruses.
Collapse
|
40
|
Photocatalytic TiO2 nanomaterials as potential antimicrobial and antiviral agents: Scope against blocking the SARS-COV-2 spread. MICRO AND NANO ENGINEERING 2022. [PMCID: PMC8685168 DOI: 10.1016/j.mne.2021.100100] [Citation(s) in RCA: 31] [Impact Index Per Article: 15.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
Abstract
The whole world is struggling with current coronavirus pandemic that shows urgent need to develop novel technologies, medical innovations or innovative materials for controlling SARS-CoV-2 infection. The mode of infection of SARS-CoV-2 is still not well known and seems to spread through surface, air, and water. Therefore, the whole surrounding environment needs to be disinfected with continuous function. For that purpose, materials with excellent antiviral properties, cost effective, environmental friendly and practically applicable should be researched. Titanium dioxide (TiO2) under ultraviolet light produces strong oxidative effect and is utilized as photocatalytic disinfectant in biomedical field. TiO2 based photocatalysts are effective antimicrobial/antiviral agents under ambient conditions with potential to be used even in indoor environment for inactivation of bacteria/viruses. Interestingly, recent studies highlight the effective disinfection of SARS-CoV-2 using TiO2 photocatalysts. Here, scope of TiO2 photocatalysts as emerging disinfectant against SARS-CoV-2 infection has been discussed in view of their excellent antibacterial and antiviral activities against various bacteria and viruses (e.g. H1N1, MNV, HSV, NDV, HCoV etc.). The current state of development of TiO2 based nano-photocatalysts as disinfectant shows their potential to combat with SARS-CoV-2 viral infection and are promising for any other such variants or viruses, bacteria in future studies.
Collapse
|
41
|
Matias ML, Pimentel A, Reis-Machado AS, Rodrigues J, Deuermeier J, Fortunato E, Martins R, Nunes D. Enhanced Fe-TiO 2 Solar Photocatalysts on Porous Platforms for Water Purification. NANOMATERIALS (BASEL, SWITZERLAND) 2022; 12:1005. [PMID: 35335818 PMCID: PMC8955547 DOI: 10.3390/nano12061005] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/01/2022] [Revised: 03/14/2022] [Accepted: 03/16/2022] [Indexed: 02/04/2023]
Abstract
In this study, polyethylene glycol-modified titanium dioxide (PEG-modified TiO2) nanopowders were prepared using a fast solvothermal method under microwave irradiation, and without any further calcination processes. These nanopowders were further impregnated on porous polymeric platforms by drop-casting. The effect of adding iron with different molar ratios (1, 2, and 5%) of iron precursor was investigated. The characterization of the produced materials was carried out by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. Optical characterization of all the materials was also carried out. SEM showed that pure TiO2 and Fe-TiO2 nanostructures presented similar nanosized and spherical particles, which uniformly covered the substrates. From XRD, pure TiO2 anatase was obtained for all nanopowders produced, which was further confirmed by Raman spectroscopy on the impregnated substrates. XPS and UV-VIS absorption spectroscopy emission spectra revealed that the presence of Fe ions on the Fe-TiO2 nanostructures led to the introduction of new intermediate energy levels, as well as defects that contributed to an enhancement in the photocatalytic performance. The photocatalytic results under solar radiation demonstrated increased photocatalytic activity in the presence of the 5% Fe-TiO2 nanostructures (Rhodamine B degradation of 85% after 3.5 h, compared to 74% with pure TiO2 for the same exposure time). The photodegradation rate of RhB dye with the Fe-TiO2 substrate was 1.5-times faster than pure TiO2. Reusability tests were also performed. The approach developed in this work originated novel functionalized photocatalytic platforms, which were revealed to be promising for the removal of organic dyes from wastewater.
Collapse
Affiliation(s)
- Maria Leonor Matias
- CENIMAT|i3N, Department of Materials Science, School of Science and Technology, NOVA University Lisbon and CEMOP/UNINOVA, 2829-516 Caparica, Portugal; (M.L.M.); (A.P.); (J.D.); (E.F.)
| | - Ana Pimentel
- CENIMAT|i3N, Department of Materials Science, School of Science and Technology, NOVA University Lisbon and CEMOP/UNINOVA, 2829-516 Caparica, Portugal; (M.L.M.); (A.P.); (J.D.); (E.F.)
| | - Ana S. Reis-Machado
- LAQV-REQUIMTE, Department of Chemistry, NOVA School of Science and Technology, Universidade NOVA de Lisboa, Campus de Caparica, 2829-516 Caparica, Portugal;
| | - Joana Rodrigues
- Physics Department & I3N, Aveiro University, Campus Universitário de Santiago, 3810-193 Aveiro, Portugal;
| | - Jonas Deuermeier
- CENIMAT|i3N, Department of Materials Science, School of Science and Technology, NOVA University Lisbon and CEMOP/UNINOVA, 2829-516 Caparica, Portugal; (M.L.M.); (A.P.); (J.D.); (E.F.)
| | - Elvira Fortunato
- CENIMAT|i3N, Department of Materials Science, School of Science and Technology, NOVA University Lisbon and CEMOP/UNINOVA, 2829-516 Caparica, Portugal; (M.L.M.); (A.P.); (J.D.); (E.F.)
| | - Rodrigo Martins
- CENIMAT|i3N, Department of Materials Science, School of Science and Technology, NOVA University Lisbon and CEMOP/UNINOVA, 2829-516 Caparica, Portugal; (M.L.M.); (A.P.); (J.D.); (E.F.)
| | - Daniela Nunes
- CENIMAT|i3N, Department of Materials Science, School of Science and Technology, NOVA University Lisbon and CEMOP/UNINOVA, 2829-516 Caparica, Portugal; (M.L.M.); (A.P.); (J.D.); (E.F.)
| |
Collapse
|
42
|
Ganjali F, Kashtiaray A, Zarei-Shokat S, Taheri-Ledari R, Maleki A. Functionalized hybrid magnetic catalytic systems on micro- and nanoscale utilized in organic synthesis and degradation of dyes. NANOSCALE ADVANCES 2022; 4:1263-1307. [PMID: 36133673 PMCID: PMC9418160 DOI: 10.1039/d1na00818h] [Citation(s) in RCA: 21] [Impact Index Per Article: 10.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/17/2021] [Accepted: 01/19/2022] [Indexed: 05/06/2023]
Abstract
Herein, a concise review of the latest developments in catalytic processes involving organic reactions is presented, focusing on magnetic catalytic systems (MCSs). In recent years, various micro- and nanoscale magnetic catalysts have been prepared through different methods based on optimized reaction conditions and utilized in complex organic synthesis or degradation reactions of pharmaceutical compounds. These biodegradable, biocompatible and eco-benign MCSs have achieved the principles of green chemistry, and thus their usage is highly advocated. In addition, MCSs can shorten the reaction time, effectively accelerate reactions, and significantly upgrade both pharmaceutical synthesis and degradation mechanisms by preventing unwanted side reactions. Moreover, the other significant benefits of MCSs include their convenient magnetic separation, high stability and reusability, inexpensive raw materials, facile preparation routes, and surface functionalization. In this review, our aim is to present at the recent improvements in the structure of versatile MCSs and their characteristics, i.e., magnetization, recyclability, structural stability, turnover number (TON), and turnover frequency (TOF). Concisely, different hybrid and multifunctional MCSs are discussed. Additionally, the applications of MCSs for the synthesis of different pharmaceutical ingredients and degradation of organic wastewater contaminants such as toxic dyes and drugs are demonstrated.
Collapse
Affiliation(s)
- Fatemeh Ganjali
- Catalysts and Organic Synthesis Research Laboratory, Department of Chemistry, Iran University of Science and Technology Tehran 16846-13114 Iran +98-21-73021584 +98-21-73228313
| | - Amir Kashtiaray
- Catalysts and Organic Synthesis Research Laboratory, Department of Chemistry, Iran University of Science and Technology Tehran 16846-13114 Iran +98-21-73021584 +98-21-73228313
| | - Simindokht Zarei-Shokat
- Catalysts and Organic Synthesis Research Laboratory, Department of Chemistry, Iran University of Science and Technology Tehran 16846-13114 Iran +98-21-73021584 +98-21-73228313
| | - Reza Taheri-Ledari
- Catalysts and Organic Synthesis Research Laboratory, Department of Chemistry, Iran University of Science and Technology Tehran 16846-13114 Iran +98-21-73021584 +98-21-73228313
| | - Ali Maleki
- Catalysts and Organic Synthesis Research Laboratory, Department of Chemistry, Iran University of Science and Technology Tehran 16846-13114 Iran +98-21-73021584 +98-21-73228313
| |
Collapse
|
43
|
Pinto TT, Núñez-de la Rosa Y, Hammer P, Aquino JM. On the performance of self-organized TiO2 nanotubes@MnOx as supercapacitor: Influence of the heat treatment, cathodic treatment, water aging, and thermal oxides. Electrochim Acta 2022. [DOI: 10.1016/j.electacta.2022.139898] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/03/2022]
|
44
|
Abstract
Air filtration has seen a sizable increase in the global market this past year due to the COVID-19 pandemic. Nanofiber nonwoven mats are able to reach certain efficiencies with a low-pressure drop, have a very high surface area to volume ratio, filter out submicron particulates, and can customize the fiber material to better suit its purpose. Although electrospinning nonwoven mats have been very well studied and documented there are not many papers that combine them. This review touches on the various ways to manufacture nonwoven mats for use as an air filter, with an emphasis on electrospinning, the mechanisms by which the fibrous nonwoven air filter stops particles passing through, and ways that the nonwoven mats can be altered by morphology, structure, and material parameters. Metallic, ceramic, and organic nanoparticle coatings, as well as electrospinning solutions with these same materials and their properties and effects of air filtration, are explored.
Collapse
|
45
|
Abstract
The COVID-19 pandemic forced the accessibility, social gathering, lifestyle, and working environment to be changed to reduce the infection. Coronavirus spreads between people in several different ways. Small liquid particles (aerosols, respiratory droplets) from an infected person are transmitted through air and surfaces that are in contact with humans. Reducing transmission through modified heating, ventilation, and air conditioning (HVAC) systems and building design are potential solutions. A comprehensive review of the engineering control preventive measures to mitigate COVID-19 spread, healthy building design, and material was carried out. The current state-of-the-art engineering control preventive measures presented include ultraviolet germicidal irradiation (UVGI), bipolar ionization, vertical gardening, and indoor plants. They have potential to improve the indoor air quality. In addition, this article presents building design with materials (e.g., copper alloys, anti-microbial paintings) and smart technologies (e.g., automation, voice control, and artificial intelligence-based facial recognition) to mitigate the infections of communicable diseases.
Collapse
|
46
|
Wu J, Alipouri Y, Luo H, Zhong L. Ultraviolet photocatalytic oxidation technology for indoor volatile organic compound removal: A critical review with particular focus on byproduct formation and modeling. JOURNAL OF HAZARDOUS MATERIALS 2022; 421:126766. [PMID: 34396962 DOI: 10.1016/j.jhazmat.2021.126766] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/26/2021] [Revised: 07/21/2021] [Accepted: 07/26/2021] [Indexed: 06/13/2023]
Abstract
Photocatalytic oxidation (PCO)-based air filters are gaining attention owing to their capacity for indoor pollutant removal. This review summarized the application of ultraviolet-photocatalytic oxidation (UV-PCO) in heating, ventilation, and air conditioning (HVAC) systems, including the modeling studies, reactor designs, the influence of operational conditions, with emphasis on the common issue of byproduct generation, and the resulting indoor byproduct exposure levels. As a result, the concentrations of the typical byproducts for the most challenging pollutants were relatively low, except for the PCO of ethanol. Hence, UV-PCO is not recommended for buildings with high ethanol concentrations. Based on the formation of the formaldehyde, a new exposure-based evaluation standard for UV-PCO was developed to evaluate the feasibility of integrating UV-PCO reactors into an HVAC system. Then, applying the newly developed evaluation standard on a developed database (data size: 174) from the literature, 32.5% of the cases were identified as suitable for HVAC system applications in residential and commercial buildings, and all cases could be used for industrial buildings. Finally, a case study was conducted to develop a support vector machine (SVM) classification model with good accuracy, and challenging compound types, inlet concentrations, and air velocity were found to be the main parameters affecting the applicability of UV-PCO.
Collapse
Affiliation(s)
- Jing Wu
- Department of Mechanical Engineering, University of Alberta, 9211-116 street NW, Edmonton, Alberta, Canada T6G 1H9
| | - Yousef Alipouri
- Department of Mechanical Engineering, University of Alberta, 9211-116 street NW, Edmonton, Alberta, Canada T6G 1H9
| | - Hao Luo
- Department of Mechanical Engineering, University of Alberta, 9211-116 street NW, Edmonton, Alberta, Canada T6G 1H9
| | - Lexuan Zhong
- Department of Mechanical Engineering, University of Alberta, 9211-116 street NW, Edmonton, Alberta, Canada T6G 1H9.
| |
Collapse
|
47
|
A Review of the Use of Semiconductors as Catalysts in the Photocatalytic Inactivation of Microorganisms. Catalysts 2021. [DOI: 10.3390/catal11121498] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/07/2023] Open
Abstract
Obtaining clean and high-quality water free of pathogenic microorganisms is a worldwide challenge. Various techniques have been investigated for achieving an effective removal or inactivation of these pathogenic microorganisms. One of those promising techniques is photocatalysis. In recent years, photocatalytic processes used semiconductors as photocatalysts. They were widely studied as a green and safe technology for water disinfection due to their high efficiency, being non-toxic and inexpensive, and their ability to disinfect a wide range of microorganisms under UV or visible light. In this review, we summarized the inactivation mechanisms of different waterborne pathogenic microorganisms by semiconductor photocatalysts. However, the photocatalytic efficiency of semiconductors photocatalysts, especially titanium dioxide, under visible light is limited and hence needs further improvements. Several strategies have been studied to improve their efficiencies which are briefly discussed in this review. With the developing of nanotechnology, doping with nanomaterials can increase and promote the semiconductor’s photocatalytic efficiency, which can enhance the deactivation or damage of a large number of waterborne pathogenic microorganisms. Here, we present an overview of antimicrobial effects for a wide range of nano-photocatalysts, including titanium dioxide-based, other metal-containing, and metal-free photocatalysts. Promising future directions and challenges for materials research in photocatalytic water disinfection are also concluded in this review.
Collapse
|
48
|
De Pasquale I, Lo Porto C, Dell'Edera M, Curri ML, Comparelli R. TiO 2-based nanomaterials assisted photocatalytic treatment for virus inactivation: perspectives and applications. Curr Opin Chem Eng 2021; 34:100716. [PMID: 36348653 PMCID: PMC9634185 DOI: 10.1016/j.coche.2021.100716] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
Abstract
The COVID 19 pandemic has demonstrated the need for urgent access to measures to contain the spread of the virus and bacteria. In this frame, the use of photocatalytic nanomaterials can be a valuable alternative to chemical disinfectants without the limitation of generating polluting by-products and with the advantage of re-usability in time. Here, on the basis of up-to-date literature reports, the use of TiO2-based photocatalytic nanomaterials in disinfection will be overviewed, considering the peculiar nanocatalysts assisted inactivation mechanisms. The potential of this class of photocatalysts for air, surface and water disinfection will be highlighted, critically revising the recent achievements in view of their potential in real application.
Collapse
Affiliation(s)
- Ilaria De Pasquale
- CNR-IPCF, Istituto per i Processi Chimico-Fisici, S.S. Bari, c/o Dip. Chimica Via Orabona 4, 70126, Bari, Italy
| | - Chiara Lo Porto
- CNR-IPCF, Istituto per i Processi Chimico-Fisici, S.S. Bari, c/o Dip. Chimica Via Orabona 4, 70126, Bari, Italy
| | - Massimo Dell'Edera
- CNR-IPCF, Istituto per i Processi Chimico-Fisici, S.S. Bari, c/o Dip. Chimica Via Orabona 4, 70126, Bari, Italy
- Dip. Chimica, Università degli Studi di Bari Aldo Moro, Via Orabona 4, 70126, Bari, Italy
| | - Maria Lucia Curri
- CNR-IPCF, Istituto per i Processi Chimico-Fisici, S.S. Bari, c/o Dip. Chimica Via Orabona 4, 70126, Bari, Italy
- Dip. Chimica, Università degli Studi di Bari Aldo Moro, Via Orabona 4, 70126, Bari, Italy
| | - Roberto Comparelli
- CNR-IPCF, Istituto per i Processi Chimico-Fisici, S.S. Bari, c/o Dip. Chimica Via Orabona 4, 70126, Bari, Italy
| |
Collapse
|
49
|
Lamri M, Bhattacharya T, Boukid F, Chentir I, Dib AL, Das D, Djenane D, Gagaoua M. Nanotechnology as a Processing and Packaging Tool to Improve Meat Quality and Safety. Foods 2021; 10:2633. [PMID: 34828914 PMCID: PMC8623812 DOI: 10.3390/foods10112633] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/09/2021] [Revised: 10/25/2021] [Accepted: 10/28/2021] [Indexed: 02/07/2023] Open
Abstract
Nanoparticles are gaining momentum as a smart tool towards a safer, more cost-effective and sustainable food chain. This study aimed to provide an overview of the potential uses, preparation, properties, and applications of nanoparticles to process and preserve fresh meat and processed meat products. Nanoparticles can be used to reinforce the packaging material resulting in the improvement of sensory, functional, and nutritional aspects of meat and processed meat products. Further, these particles can be used in smart packaging as biosensors to extend the shelf-life of fresh and processed meat products and also to monitor the final quality of these products during the storage period. Nanoparticles are included in product formulation as carriers of health-beneficial and/or functional ingredients. They showed great efficiency in encapsulating bioactive ingredients and preserving their properties to ensure their functionality (e.g., antioxidant and antimicrobial) in meat products. As a result, nanoparticles can efficiently contribute to ensuring product safety and quality whilst reducing wastage and costs. Nevertheless, a wider implementation of nanotechnology in meat industry is highly related to its economic value, consumers' acceptance, and the regulatory framework. Being a novel technology, concerns over the toxicity of nanoparticles are still controversial and therefore efficient analytical tools are deemed crucial for the identification and quantification of nanocomponents in meat products. Thus, migration studies about nanoparticles from the packaging into meat and meat products are still a concern as it has implications for human health associated with their toxicity. Moreover, focused economic evaluations for implementing nanoparticles in meat packaging are crucial since the current literature is still scarce and targeted studies are needed before further industrial applications.
Collapse
Affiliation(s)
- Melisa Lamri
- Laboratory of Food Quality and Food Safety, Department of Food technology, Université Mouloud Mammeri, Tizi-Ouzou 15000, Algeria; (M.L.); (D.D.)
| | - Tanima Bhattacharya
- Innovation, Incubation & Industry (I-Cube) Laboratory, Techno India NJR Institute of Technology, Udaipur 313003, India;
| | - Fatma Boukid
- Food Safety and Functionality Programme, Institute of Agriculture and Food Research and Technology (IRTA), 17121 Monells, Spain;
| | - Imene Chentir
- Laboratory of Food, Processing, Control and Agroressources Valorization, Higher School of Food Science and Agri-Food Industry, Algiers 16200, Algeria;
| | - Amira Leila Dib
- GSPA Research Laboratory, Institut des Sciences Vétérinaires, Université Frères Mentouri Constantine 1, Constantine 25000 Algeria;
| | - Debashrita Das
- School of Community Science & Technology, IIEST Shibpur, Howrah 711103, India;
| | - Djamel Djenane
- Laboratory of Food Quality and Food Safety, Department of Food technology, Université Mouloud Mammeri, Tizi-Ouzou 15000, Algeria; (M.L.); (D.D.)
| | - Mohammed Gagaoua
- Food Quality and Sensory Science Department, Teagasc Food Research Centre, Ashtown, D15 KN3K Dublin, Ireland
| |
Collapse
|
50
|
A state-of-the-art review of the fabrication and characteristics of titanium and its alloys for biomedical applications. Biodes Manuf 2021; 5:371-395. [PMID: 34721937 PMCID: PMC8546395 DOI: 10.1007/s42242-021-00170-3] [Citation(s) in RCA: 38] [Impact Index Per Article: 12.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/15/2021] [Accepted: 09/24/2021] [Indexed: 01/08/2023]
Abstract
Abstract Commercially pure titanium and titanium alloys have been among the most commonly used materials for biomedical applications since the 1950s. Due to the excellent mechanical tribological properties, corrosion resistance, biocompatibility, and antibacterial properties of titanium, it is getting much attention as a biomaterial for implants. Furthermore, titanium promotes osseointegration without any additional adhesives by physically bonding with the living bone at the implant site. These properties are crucial for producing high-strength metallic alloys for biomedical applications. Titanium alloys are manufactured into the three types of α, β, and α + β. The scientific and clinical understanding of titanium and its potential applications, especially in the biomedical field, are still in the early stages. This review aims to establish a credible platform for the current and future roles of titanium in biomedicine. We first explore the developmental history of titanium. Then, we review the recent advancement of the utility of titanium in diverse biomedical areas, its functional properties, mechanisms of biocompatibility, host tissue responses, and various relevant antimicrobial strategies. Future research will be directed toward advanced manufacturing technologies, such as powder-based additive manufacturing, electron beam melting and laser melting deposition, as well as analyzing the effects of alloying elements on the biocompatibility, corrosion resistance, and mechanical properties of titanium. Moreover, the role of titania nanotubes in regenerative medicine and nanomedicine applications, such as localized drug delivery system, immunomodulatory agents, antibacterial agents, and hemocompatibility, is investigated, and the paper concludes with the future outlook of titanium alloys as biomaterials. Graphic abstract ![]()
Collapse
|