Zinc-Containing Effluent Treatment Using Shewanella xiamenensis Biofilm Formed on Zeolite

Influence of irrigation with oxygen plasma treated metal contaminated water on plant growth

This study aimed to evaluate the effects of plasma treated metal contaminated water, used for irrigation, on plant growth. Zinc (Zn) is a commonly used metal that can enter the environment through industrial processes. It may be released as particles into the atmosphere or discharged as wastewater into waterways or the ground. Exposure to large amounts of zinc, even for a short duration, can seriously impact human health. In this experiment, three different DBD (dielectric barrier discharge) O2 plasma treated zinc contaminated water and a control (tap water) were used, with Arabidopsis thaliana as the model plant. The treatments were: (i) Control, (ii) Zn water, (iii) Zn + O3(30 min), and (iv) Zn + O3(60 min). Arabidopsis plant exhibited maximum growth in the Zn + O3(30 min) treatment. All growth parameters, except leaf area, followed this trend: Zn + O3(30 min) > Control > Zn water > Zn + O3(60 min). Gene expression analysis revealed that reduced metal ion stress and controlled oxidation due to active oxygen species contributed to favorable/improved growth of Arabidopsis in the Zn + O3(30 min) treatment. Therefore, 30 min of DBD O2 plasma treated zinc contaminated water [Zn + O3(30 min)] can mitigate the adverse effects of excess zinc ions and promote the growth of Arabidopsis plants.

Structure elucidation and gene cluster of the O-antigen of Shewanella xiamenensis strain DCB-2-1 containing an amide of d-glucuronic acid with d-alanine and its bonding with U, Cr and V

The aim of this work was to examine the structure and gene cluster of O-OPS of S. xiamenensis strain DCB-2-1 and survey its conceivability for chelating uranyl, chromate and vanadate ions from solution. O-polysaccharide (OPS, O-antigen) was isolated from the lipopolysaccharide of Shewanella xiamenensis DCB-2-1 and studied by 1D and 2D nuclear magnetic resonance (NMR) spectroscopy and sugar analysis. The following structure of the brunched pentasaccharide was established: where d-β-GlcpA(d-Ala) is d-glucuronic acid acylated with NH group of d-Ala. The OPS structure established is unique among known bacterial polysaccharide structures. Interestingly, that dN-(d-glucuronoyl)-d-alanine derivative is not found in bacterial polysaccharides early. The O-antigen gene cluster of Shewanella xiamenensis strain DCB-2-1 has been sequenced. The gene functions were tentatively assigned by comparison with sequences in the available databases and found to be in agreement with the OPS structure. Based on the analysis of the IR spectra of the isolated polysaccharide DCB-2-1 and the products of its interaction with UO2(NO3)2 ∗ 6H2O, NH4VO3 and K2Cr2O7, a method of binding them can be proposed. Laboratory experiments show that the use of polysaccharide can be effective in removing uranyl, chromate and vanadate from solution.

Environmentally-Friendly Materials in Wastewater Treatment

The intensive development of industry and agriculture caused by high population growth results in the release of large volumes of wastewater containing organic and inorganic pollutants into the environment [...].

Adaptive Mechanisms of Shewanella xiamenensis DCB 2-1 Metallophilicity

The dose-dependent effects of single metals (Zn, Ni, and Cu) and their combinations at steady time-actions on the cell viability of the bacteria Shewanella xiamenensis DCB 2-1, isolated from a radionuclide-contaminated area, have been estimated. The accumulation of metals by Shewanella xiamenensis DCB 2-1 in single and multi-metal systems was assessed using the inductively coupled plasma atomic emission spectroscopy. To estimate the response of the bacteria's antioxidant defense system, doses of 20 and 50 mg/L of single studied metals and 20 mg/L of each metal in their combinations (non-toxic doses, determined by the colony-forming viability assay) were used. Emphasis was given to catalase and superoxide dismutase since they form the primary line of defense against heavy metal action and their regulatory circuit of activity is crucial. The effect of metal ions on total thiol content, an indicator of cellular redox homeostasis, in bacterial cells was evaluated. Genome sequencing of Shewanella xiamenensis DCB 2-1 reveals genes responsible for heavy metal tolerance and detoxification, thereby improving understanding of the potential of the bacterial strain for bioremediation.

Yeast—As Bioremediator of Silver-Containing Synthetic Effluents

Yeast Saccharomyces cerevisiae may be regarded as a cost-effective and environmentally friendly biosorbent for complex effluent treatment. The effect of pH, contact time, temperature, and silver concentration on metal removal from silver-containing synthetic effluents using Saccharomyces cerevisiae was examined. The biosorbent before and after biosorption process was analysed using Fourier-transform infrared spectroscopy, scanning electron microscopy, and neutron activation analysis. Maximum removal of silver ions, which constituted 94–99%, was attained at the pH 3.0, contact time 60 min, and temperature 20 °C. High removal of copper, zinc, and nickel ions (63–100%) was obtained at pH 3.0–6.0. The equilibrium results were described using Langmuir and Freundlich isotherm, while pseudo-first-order and pseudo-second-order models were applied to explain the kinetics of the biosorption. The Langmuir isotherm model and the pseudo-second-order model fitted better experimental data with maximum adsorption capacity in the range of 43.6–108 mg/g. The negative Gibbs energy values pointed at the feasibility and spontaneous character of the biosorption process. The possible mechanisms of metal ions removal were discussed. Saccharomyces cerevisiae have all necessary characteristics to be applied to the development of the technology of silver-containing effluents treatment.

Removal of Zinc from Concentrated Galvanic Wastewater by Sodium Trithiocarbonate: Process Optimization and Toxicity Assessment

In the present research, the removal of zinc from concentrated galvanic wastewater (pH 3.1, conductivity 20.31 mS/cm, salinity, 10.16 g/L, Chemical Oxygen Demand (COD) 2900 mg O₂/L, Total Organic Carbon (TOC) 985 mg/L, zinc (Zn) 1534 mg/L and ethylenediaminetetraacetic acid (EDTA) 70 mg/L) by combination of lime (Ca(OH)₂) and sodium trithiocarbonate (Na₂CS₃) as precipitation agents is studied. Central Composite Design (CCD) and response surface methodology (RSM) were applied for modelling and optimizing the designed wastewater treatment process. Analysis of Variance (ANOVA) and the experimental verification of the model confirmed the consistency of the experimental and estimated data calculated from the model (R² = 0.9173, R²_adj. = 0.8622). The use of Ca(OH)₂ and Na₂CS₃ in the optimal condition calculated from the model (pH = 10.75 ± 0.10, V Na₂CS₃ dose 0.043 mL/L and time = 5 min) resulted in a decrease in the concentration of Zn in treated wastewater by 99.99%. Other physicochemical parameters of wastewater also improved. Simultaneously, the application of Ca(OH)₂ and Na₂CS₃ reduced the inhibition of activated sludge dehydrogenase from total inhibition (for raw wastewater) to -70% (for treated wastewater). Under the same conditions the phytotoxicity tests revealed that the seed germination index for the raw and treated wastewater increased from 10% to 50% and from 90% to 100% for white mustard (Sinapis alba) and garden cress (Lepidium sativum L.), respectively. The parameters of root and shoot growth showed a statistically significant improvement. Treated wastewater (1:10) showed a stimulating effect (shoot growth) compared to the control sample (GI = -116.7 and -57.9 for S. alba and L. sativum L., respectively). Thus, the use of Na₂CS₃ is a viable option for the treatment of concentrated galvanic wastewater containing zinc.

Biosorption and Bioaccumulation Capacity of Arthospiraplatensis toward Europium Ions

Europium recovery from wastewater is determined by its high significance for industry and toxicity for living organisms. The capacity of cyanobacteria Arthospira platensis (Spirulina) to remove Eu(III) through biosorption and bioaccumulation was evaluated. In biosorption experiments, the effects of four variables pH, metal concentration, time, and temperature on metal removal were studied. In bioaccumulation experiments, the effect of Eu(III) concentrations on biomass bioaccumulation capacity and biochemical composition was assessed. The efficiency of Eu(III) uptake in both experiments was determined using ICP-AES techniques. Maximum biosorption of Eu(III) was achieved at pH 3.0. Equilibrium data fitted well with the Langmuir and Freundlich models, with maximum adsorption capacity of 89.5 mg/g. The pseudo-first-, pseudo-second-order, and Elovich models were found to correlate well with the experimental data. According to thermodynamic studies the sorption was feasible, spontaneous, and endothermic in nature. At addition of Eu(III) ions in the cultivation medium in concentrations of 10–30 mg/L, its accumulation in biomass was 9.8–29.8 mg/g (removal efficiency constituting 98–99%). Eu(III) did not affect productivity and content of carbohydrates and pigments in biomass but led to the decrease of the content of protein and an increase in the amount of MDA. The high Eu(III) biosorption and bioaccumulation efficiency of Arthrospira platensis may constitute an effective and eco-friendly strategy to recover it from contaminated environment.

Risk of colloidal and pseudo-colloidal transport of actinides in nitrate contaminated groundwater near a radioactive waste repository after bioremediation

The possible role of biogeochemical processes in the transport of colloidal and pseudo-colloidal U, Np, and Pu during bioremediation of radionuclide- and nitrate-contaminated groundwater was investigated. In two laboratory experiments with water samples taken from contaminated aquifers before and post bioremediation, we found that microbial processes could cause clayed, ferruginous, and actinide colloids to coagulate. The main mechanisms are biogenic insoluble ferrous iron species formations (goethite, pyrrhotite, siderite, troilite, and ferrihydrite), the aggregation of clay particles by microbial metabolites, and the immobilization of actinides in the bacterial cells, large polymers, and iron and clayed sediments. This process decreases the risk of colloidal and pseudo-colloidal transport of actinides.

Unraveling the Underlying Heavy Metal Detoxification Mechanisms of Bacillus Species

The rise of anthropogenic activities has resulted in the increasing release of various contaminants into the environment, jeopardizing fragile ecosystems in the process. Heavy metals are one of the major pollutants that contribute to the escalating problem of environmental pollution, being primarily introduced in sensitive ecological habitats through industrial effluents, wastewater, as well as sewage of various industries. Where heavy metals like zinc, copper, manganese, and nickel serve key roles in regulating different biological processes in living systems, many heavy metals can be toxic even at low concentrations, such as mercury, arsenic, cadmium, chromium, and lead, and can accumulate in intricate food chains resulting in health concerns. Over the years, many physical and chemical methods of heavy metal removal have essentially been investigated, but their disadvantages like the generation of chemical waste, complex downstream processing, and the uneconomical cost of both methods, have rendered them inefficient,. Since then, microbial bioremediation, particularly the use of bacteria, has gained attention due to the feasibility and efficiency of using them in removing heavy metals from contaminated environments. Bacteria have several methods of processing heavy metals through general resistance mechanisms, biosorption, adsorption, and efflux mechanisms. Bacillus spp. are model Gram-positive bacteria that have been studied extensively for their biosorption abilities and molecular mechanisms that enable their survival as well as their ability to remove and detoxify heavy metals. This review aims to highlight the molecular methods of Bacillus spp. in removing various heavy metals ions from contaminated environments.