The State of Starch/Hydroxyapatite Composite Scaffold in Bone Tissue Engineering with Consideration for Dielectric Measurement as an Alternative Characterization Technique

Recent advances of bone tissue engineering: carbohydrate and ceramic materials, fundamental properties and advanced biofabrication strategies ‒ a comprehensive review

Bone is a dynamic tissue that can always regenerate itself through remodeling to maintain biofunctionality. This tissue performs several vital physiological functions. However, bone scaffolds are required for critical-size damages and fractures, and these can be addressed by bone tissue engineering. Bone tissue engineering (BTE) has the potential to develop scaffolds for repairing critical-size damaged bone. BTE is a multidisciplinary engineered scaffold with the desired properties for repairing damaged bone tissue. Herein, we have provided an overview of the common carbohydrate polymers, fundamental structural, physicochemical, and biological properties, and fabrication techniques for bone tissue engineering. We also discussed advanced biofabrication strategies and provided the limitations and prospects by highlighting significant issues in bone tissue engineering. There are several review articles available on bone tissue engineering. However, we have provided a state-of-the-art review article that discussed recent progress and trends within the last 3-5 years by emphasizing challenges and future perspectives.

Facile fabrication of linezolid/strontium coated hydroxyapatite/graphene oxide nanocomposite for osteoporotic bone defect

Hydroxyapatite (HAp) coatings currently have limited therapeutic applications because they lack anti-infection, osteoinductivity, and poor mechanical characteristics. On the titanium substrate, electrochemical deposition (ECD) was used to construct the strontium (Sr)-featuring hydroxyapatite (HAp)/graphene oxides (GO)/linezolid (LZ) nanomaterial coated with antibacterial and drug delivery properties. The newly fabricated nanomaterials were confirmed by X-ray diffraction analysis (XRD), Fourier-transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) analysis and morphological features were examined by scanning electron microscope (SEM) analysis. The results reveal multiple nucleation sites for SrHAp/GO/LZ composite coatings due to oxygen-comprising moieties on the 2D surface of GO. It was shown to be favorable for osteoblast proliferation and differentiation. The elastic modulus and hardness of LZ nanocomposite with SrHAp/GO/LZ coatings were increased by 67 % and 121 %, respectively. An initial 5 h burst of LZ release from the SrHAp/GO/LZ coating was followed by 14 h of gradual release, owing to LZ's physical and chemical adsorption. The SrHAp/GO/LZ coating effectively inhibited both S. epidermidis and S. aureus, and the inhibition lasted for three days, as demonstrated by the inhibition zone and colony count assays. When MG-63 cells are coated with SrHAp/GO/LZ composite coating, their adhesion, proliferation, and differentiation greatly improve when coated with pure titanium. A novel surface engineering nanomaterial for treating and preventing osteoporotic bone defects, SrHAp/GO/LZ, was shown to have high mechanical characteristics, superior antibacterial abilities, and osteoinductivity.

Scaffold-Mediated Drug Delivery for Enhanced Wound Healing: A Review

Wound healing is a complex physiological process involving coordinated cellular and molecular events aimed at restoring tissue integrity. Acute wounds typically progress through the sequential phases of hemostasis, inflammation, proliferation, and remodeling, while chronic wounds, such as venous leg ulcers and diabetic foot ulcers, often exhibit prolonged inflammation and impaired healing. Traditional wound dressings, while widely used, have limitations such poor moisture retention and biocompatibility. To address these challenges and improve patient outcomes, scaffold-mediated delivery systems have emerged as innovative approaches. They offer advantages in creating a conducive environment for wound healing by facilitating controlled and localized drug delivery. The manuscript explores scaffold-mediated delivery systems for wound healing applications, detailing the use of natural and synthetic polymers in scaffold fabrication. Additionally, various fabrication techniques are discussed for their potential in creating scaffolds with controlled drug release kinetics. Through a synthesis of experimental findings and current literature, this manuscript elucidates the promising potential of scaffold-mediated drug delivery in improving therapeutic outcomes and advancing wound care practices.

Exploration of Whitlockite Nanostructures for Hemostatic Applications

Background Calcium magnesium phosphate (CMP)-based whitlockite is a promising biomaterial for hemostasis and regenerative applications. Regenerative approaches aim to advance tissue repair and recovery in different clinical scenarios. Whitlockite is a biocompatible and biodegradable mineral that has garnered impressive consideration for its interesting properties, making it an appealing candidate for therapeutic applications. Aim This study aimed to evaluate the hemostatic behavior of synthesized whitlockite nanoparticles. Materials and methods Coprecipitation and hydrothermal methods were used to synthesize whitlockite nanoparticles. Calcium nitrate, magnesium nitrate, and diammonium hydrogen phosphate were used as precursors to prepare this material. Results Crystalline phases of whitlockite (Ca3Mg)3(PO4) and calcium magnesium phosphate Ca7Mg2P6O2 were observed through X-ray diffraction (XRD) patterns, along with relevant properties of the phosphate functional group detected through Raman spectra. This study explores the hemostatic adequacy of CMP-based whitlockite using different methodologies. The capacity of the materials to actuate platelet conglomeration and encourage clot arrangement is assessed using in vitro experiments. Moreover, this study investigates the regenerative potential of CMP-based whitlockite in tissue-building applications. Conclusion The structural and morphological parameters provide crucial insights into the proper formation of the material, and the hemoclot assessment aids in understanding its coagulation behavior. Future investigations and clinical trials will be instrumental in fully harnessing the potential of CMP-based whitlockite for advancing hemostasis and regenerative medicine.

Delivery of Growth Factors to Enhance Bone Repair

The management of critical-sized bone defects caused by nonunion, trauma, infection, malignancy, pseudoarthrosis, and osteolysis poses complex reconstruction challenges for orthopedic surgeons. Current treatment modalities, including autograft, allograft, and distraction osteogenesis, are insufficient for the diverse range of pathology encountered in clinical practice, with significant complications associated with each. Therefore, there is significant interest in the development of delivery vehicles for growth factors to aid in bone repair in these settings. This article reviews innovative strategies for the management of critical-sized bone loss, including novel scaffolds designed for controlled release of rhBMP, bioengineered extracellular vesicles for delivery of intracellular signaling molecules, and advances in regional gene therapy for sustained signaling strategies. Improvement in the delivery of growth factors to areas of significant bone loss has the potential to revolutionize current treatment for this complex clinical challenge.

Resorbable Biomaterials Used for 3D Scaffolds in Tissue Engineering: A Review

This article provides a thorough overview of the available resorbable biomaterials appropriate for producing replacements for damaged tissues. In addition, their various properties and application possibilities are discussed as well. Biomaterials are fundamental components in tissue engineering (TE) of scaffolds and play a critical role. They need to exhibit biocompatibility, bioactivity, biodegradability, and non-toxicity, to ensure their ability to function effectively with an appropriate host response. With ongoing research and advancements in biomaterials for medical implants, the objective of this review is to explore recently developed implantable scaffold materials for various tissues. The categorization of biomaterials in this paper includes fossil-based materials (e.g., PCL, PVA, PU, PEG, and PPF), natural or bio-based materials (e.g., HA, PLA, PHB, PHBV, chitosan, fibrin, collagen, starch, and hydrogels), and hybrid biomaterials (e.g., PCL/PLA, PCL/PEG, PLA/PEG, PLA/PHB PCL/collagen, PCL/chitosan, PCL/starch, and PLA/bioceramics). The application of these biomaterials in both hard and soft TE is considered, with a particular focus on their physicochemical, mechanical, and biological properties. Furthermore, the interactions between scaffolds and the host immune system in the context of scaffold-driven tissue regeneration are discussed. Additionally, the article briefly mentions the concept of in situ TE, which leverages the self-renewal capacities of affected tissues and highlights the crucial role played by biopolymer-based scaffolds in this strategy.

A comparative study of starch-g-(glycidyl methacrylate)/synthetic polymer-based hydrogels

Chemical modification reactions and blending formation are two alternatives used to improve the properties of starch-based materials. This work used both approaches to evaluate how they would affect the properties of hydrogels. The hydrogels were based on corn starch (St), modified with glycidyl methacrylate (GMA; starch-g-GMA; ^GMASt), and blended with N,N'-dimethylacrylamide (DMAAm; ^GMASt_xDMAAm_y) or sodium acrylate (SA; ^GMASt_xSA_y). The results confirmed that the pure ^GMASt matrix had a low swelling degree (≈3 g g^-1), but when blended with the synthetic polymers, this value reached ≈10 g g^-1 (sample ^GMASt₂₅DMAAm₇₅). All matrices showed responsiveness towards pH variations. In general, they swelled more at pH 5 than at pH 7. While DMAAm had more influence on the swelling degree, SA was more efficient as a mechanical enhancer. Increasing 25 % of the amount of SA in the blend increased Young's Modulus by a factor of ≈10 times. It confirmed that both polymers effectively change the properties of ^GMASt, but in different ways.

Preparation and characterization of FsHA/FsCol beads: Cell attachment and cytotoxicity studies

The present study was conducted to prepare the fish scales' hydroxyapatite/collagen beads (FsHA/FsCol) and characterize their biological, physical, and chemical properties. A new method was used to prepare FsHA/FsCol composite beads by infiltrating the beads of FsHA in the solution of FsCol as a green method. X-ray diffraction analysis (XRD), scanning electron microscopy (SEM) analysis, Fourier-transform infrared (FTIR) spectroscopy analysis and energy dispersive X-ray analysis (EDX), used to evaluate the physical-chemical properties of the synthesized samples. Meanwhile, the cytotoxic and attachment studies of the FsHA/FsCol beads were used to investigate the biological features against the MG-63 human cell line. The results specified the efficiency of the new method, functional groups of FsCol were indicated to be present inside the beads of FsHA according to the XRD analysis which shows the functional peaks of FsCol. The SEM image were conformed successfully use starch as a porous agent to increasing the porous of the FsHA beads after adding 20 wt% of it. Alamar Blue assay has been used to evaluate the cytotoxicity of FsHA/FsCol beads the results were shown 87% average cell viability of the MG-63 human cell line on the beads and attached very well to the surface of the composites, indicating no toxicity being exerted by all the composites at high concentrations.

Novel coatings for the continuous repair of human bone defects

Bone defects are the second most common tissue grafts after blood. However, bone grafts face several problems, such as bone scaffolds, which have low bioactivity and are prone to corrosion. Much of the current research on bone scaffolds is focused on the mechanical aspects such as structure and strength. Surface modification of the bone scaffold is carried out in terms of the mechanical structure or structural design of the bone scaffold with reference to a bionic structure. However, with the development of mechanical designs, materials science, and medicine, many studies have reported that promoting bone growth by modifying the structure of the scaffold or coating is not possible. Therefore, the application of a bioactive coating to the surface of the bone scaffold is particularly important to generate a synergistic effect between the structure and active coating. In this article, we present several perspectives to improve the bioactivity of bone scaffolds, including corrosion resistance, loading of bioactive coatings or drugs on bone scaffolds, improved adhesion to the surface of the bone scaffolds, immune response modulation, and drawing on bionic structures during manufacturing.

Starch-based shape memory sponge for rapid hemostasis in penetrating wounds

Death caused by excessive blood loss has always been a global concern. Timely control of bleeding in incompressible penetrated wounds remains a great challenge. Here, we developed a shape memory sponge (SQG) based on modified starch and gelatin (Gel) to control the hemorrhage of penetrating wounds. The porous structure of SQG greatly enhanced the absorption of blood, and the adhesion of erythrocytes and platelets. The water absorption rate of SQG reached 1178.72 ± 12.18% in 10 s. SQG quickly recovered its shape in water (∼3 s) and exhibited high mechanical strength (∼38 kPa), acting as a physically packed barrier to facilitate hemostasis. Furthermore, the positively charged sponges were conducive to activating platelets and promoting the release of coagulation factors. SQG sponges possessed the lowest blood coagulation index (BCI) of 21.32 ± 0.19%, and presented good biocompatibility and obvious inhibitory effect on Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). Moreover, SQG sponges controlled complete bleeding in 69 ± 20 s and a bleeding loss of 334 ± 138 mg was observed, nearly 50% lower than that of gelatin sponge in rabbit liver penetrating wounds. Overall, SQG possesses a combination of potent shape recovery, rapid hemostasis, and excellent antibacterial and degradation ability, enabling promising applications for hemostasis in non-compressible penetrating wounds.

Evaluation of the effects of starch on polyhydroxybutyrate electrospun scaffolds for bone tissue engineering applications

Efficient design for bone tissue engineering requires an understanding of the appropriate selection of biomimetic natural or synthetic materials and scalable fabrication technologies. In this research, poly (3-hydroxybutyrate) (PHB) and starch (5-15 wt%) as biological macromolecules were used to fabricate novel biomimetic scaffolds by electrospinning method. SEM results of electrospun scaffolds revealed bead-free nanofibers and three-dimensional homogenous structures with highly interconnected pores. Results of FTIR and Raman demonstrated that there were hydrogen bonds between the two polymers. The tensile strength of scaffolds was significantly improved by adding starch up to 10 wt%, from 3.05 to 15.54 MPa. In vitro degradation and hydrophilicity of the scaffolds were improved with the presence of starch. The viability and proliferation of MG-63 cells and alkaline phosphatase (ALP) activity were remarkably increased in the PHB-starch scaffolds compared to the PHB and control samples. The mineralization and calcium deposition of MG-63 cells were confirmed by alizarin red staining. It is concluded that PHB/starch electrospun scaffold could be a good candidate for bone tissue engineering applications.

Preparation, Characterization, and Biocompatibility Assessment of Polymer-Ceramic Composites Loaded with Salvia officinalis Extract

In the present work, hydroxyapatite-polymer materials were developed. The preparation, as well as characterization of the ceramic-polymer composites based on polyvinylpyrrolidone, sodium alginate, and gelatin were described. The system was enriched with the addition of common sage extract (Salvia officinalis). The antioxidant potential of sage aqueous extract and total polyphenol content was determined. The antioxidant capacity and total phenolic content of extract were equal to 86.06 ± 0.49% and 16.21 ± 0.58 mg gallic acid equivalents per gram of dry weight, respectively. Incubation studies in selected biological liquids were carried out to determine the biomineralization capacity on the surface of the composites and to examine the kinetics of release of the active substances from within the material. As a result of the incubation, a gradual release of the extract over time from the polymer matrix was observed; moreover, the appearance of new apatite layers on the composite surface was recorded as early as after 14 days, which was also confirmed by energy-dispersive X-ray spectroscopy (EDS) microanalysis. The composites were analyzed with Fourier transform infrared spectroscopy (FTIR) spectroscopy, and the morphology was recorded by scanning electron microscope (SEM) imaging. The in vitro biological studies allowed their cytotoxic effect on the reference L929 fibroblasts to be excluded. Further analysis of the biomaterials showed that enrichment with polyphenols does not support the adhesion of L929 cells to the surface of the material. However, the addition of these natural components stimulates human monocytes that constitute the first step of tissue regeneration.

Rapid Fabrication of MgNH4PO4·H2O/SrHPO4 Porous Composite Scaffolds with Improved Radiopacity via 3D Printing Process

Although bone repair scaffolds are required to possess high radiopacity to be distinguished from natural bone tissues in clinical applications, the intrinsic radiopacity of them is usually insufficient. For improving the radiopacity, combining X-ray contrast agents with bone repair scaffolds is an effective method. In the present research, MgNH₄PO₄·H₂O/SrHPO₄ 3D porous composite scaffolds with improved radiopacity were fabricated via the 3D printing technique. Here, SrHPO₄ was firstly used as a radiopaque agent to improve the radiopacity of magnesium phosphate scaffolds. X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS) were used to characterize the phases, morphologies, and element compositions of the 3D porous composite scaffolds. The radiography image showed that greater SrHPO₄ contents corresponded to higher radiopacity. When the SrHPO₄ content reached 9.34%, the radiopacity of the composite scaffolds was equal to that of a 6.8 mm Al ladder. The porosity and in vitro degradation of the porous composite scaffolds were studied in detail. The results show that magnesium phosphate scaffolds with various Sr contents could sustainably degrade and release the Mg, Sr, and P elements during the experiment period of 28 days. In addition, the cytotoxicity on MC3T3-E1 osteoblast precursor cells was evaluated, and the results show that the porous composite scaffolds with a SrHPO₄ content of 9.34% possessed superior cytocompatibility compared to that of the pure MgNH₄PO₄·H₂O scaffolds when the extract concentration was 0.1 g/mL. Cell adhesion experiments showed that all of the scaffolds could support MC3T3-E1 cellular attachment well. This research indicates that MgNH₄PO₄·H₂O/SrHPO₄ porous composite scaffolds have potential applications in the bone repair fields.