Experimental Design, Equilibrium Modeling and Kinetic Studies on the Adsorption of Methylene Blue by Adsorbent: Activated Carbon from Durian Shell Waste

Enhancing catalytic activity of CuCoFe-layered double oxide towards peroxymonosulfate activation by coupling with biochar derived from durian peel for antibiotic degradation: The role of C=O in biochar and underlying mechanism of built-in electric field

CuCoFe-LDO/BCD was successfully synthesized from CuCoFe-LDH and biochar derived from durian shell (BCD). Ciprofloxacin (CFX) degraded more than 95% mainly by O2•- and 1O2 in CuCoFe-LDO/BCD(2/1)/PMS system within 10 min with a rate constant of 0.255 min-1, which was 14.35 and 2.66 times higher than those in BCD/PMS and CuCoFe-LDO/PMS systems, respectively. The catalytic system exhibited good performance over a wide pH range (3-9) and high degradation efficiency of other antibiotics. Built-in electric field (BIEF) driven by large difference in the work function/Fermi level ratio between CuCoFe-LDO and BCD accelerated continuous electron transfer from CuCoFe-LDO to BCD to result in two different microenvironments with opposite charges at the interface, which enhanced PMS adsorption and activation via different directions. As a non-radical, 1O2 was mainly generated via PMS activation by C=O in BCD. The presence of C=O in BCD resulted in an increase in atomic charge of C in C=O and redistributed the charge density of other C atoms. As a result, strong adsorption of PMS at C atom in C=O and other C with a high positive charge was favorable for 1O2 generation, whereas an enhanced adsorption of PMS at negatively charged C accounted for the generation of •OH and SO4•-. After adsorption, electrons in C of BCD became deficient and were fulfilled with those transferred from CuCoFe-LDO driven by BIEF, which ensured the high catalytic activity of CuCoFe-LDO/BCD. O2•-, on the other hand, was generated via several pathways that involved in the transformation of •OH and SO4•- originated from PMS activation by the transition of metal species in CuCoFe-LDO and negatively charged C in BCD. This study proposed a new idea of fabricating a low-cost metal-LDH and biomass-derived catalyst with a strong synergistic effect induced by BIEF for enhancing PMS activation and antibiotic degradation.

A comprehensive review on the production of durian fruit waste-derived bioadsorbents for water treatment

Global water pollution by various pollutants is becoming an urgent problem. The conversion of durian fruit waste into adsorbents can help to mitigate this issue. Transforming durian waste into adsorbents can reduce pollution risk from waste discharged directly into the environment, while also effectively eliminating existing contaminants. Here, this work explores the potential of durian fruit waste and supplies insights into the synthesis and application of durian fruit waste-derived adsorbents such as biosorbents, modified-biosorbents, biochars, activated carbons, and composites. Several factors affecting the adsorption process of pollutants and the mechanism how pollutants can be adsorbed onto durian fruit waste-derived adsorbents are elucidated. This review also analyzes some aspects of limitations and prospects of biosorbents derived from durian fruit waste. It is anticipated that the promising properties and applications of durian fruit waste-derived adsorbents open up a new field for water waste treatment.

Preparation of Reusable Porous Carbon Nanofibers from Oxidized Coal Liquefaction Residue for Efficient Adsorption in Water Treatment

Porous carbon nanofibers are commonly used for adsorption processes owing to their high specific surface area and rich pore structure. However, the poor mechanical properties of polyacrylonitrile (PAN)-based porous carbon nanofibers have limited their applications. Herein, we introduced solid waste-derived oxidized coal liquefaction residue (OCLR) into PAN-based nanofibers to obtain activated reinforced porous carbon nanofibers (ARCNF) with enhanced mechanical properties and regeneration for efficient adsorption of organic dyes in wastewater. This study examined the effects of contact time, concentration, temperature, pH, and salinity on the adsorption capacity. The adsorption processes of the dyes in ARCNF are appropriately described by the pseudo-second-order kinetic model. The maximum adsorption capacity for malachite green (MG) on ARCNF is 2712.84 mg g^-1 according to the fitted parameters of the Langmuir model. Adsorption thermodynamics indicated that the adsorptions of the five dyes are spontaneous and endothermic processes. In addition, ARCNF have good regenerative performance, and the adsorption capacity of MG is still higher than 76% after 5 adsorption-desorption cycles. Our prepared ARCNF can efficiently adsorb organic dyes in wastewater, reducing the pollution to the environment and providing a new idea for solid waste recycling and water treatment.

Two New 1D Supramolecular Compounds Based on PbI2 for Efficient Iodine Capture

Two new inorganic-organic hybrid crystals based on PbI2 were assembled through the solvent evaporation method, namely, {[L1]·[Pb2I6]}n (1) and {[L2]2·[Pb3I10]}n (2). L1-L2 are a series of multivalent nitrogen-containing cationic ligands. Compounds 1–2 were characterized by single-crystal X-ray diffraction, elemental analysis, FT-IR, powder X-ray diffraction, and thermogravimetric microanalysis. The results showed that the adsorption rate of 80 mg compound 1 to iodine reached 96.59%, indicating a high iodine capture performance in cyclohexane solution. In the meantime, the adsorption kinetics is most suitable for a pseudo-second-order model, and the adsorption process is mainly chemisorption. Adsorption thermodynamics is most suitable for the Langmuir model, indicating that adsorption occurs on the surface of the monolayer. According to the adsorption mechanism, it can be inferred that the structure of compound 1 contains amino, benzene, N heterocyclic, and other active groups, that is, indirectly increases the adsorption site with iodine, and the chemical reaction with iodine improves the removal rate of iodine in cyclohexane solution. In addition, compound 1 was found to have good iodine adsorption and recyclability by cyclic experiments. Therefore, the synthesized compound 1 can be used as a potential and excellent iodide capture adsorbent, which may have a good application prospects in the future.

Speciation of Hexavalent Chromium in Aqueous Solutions Using a Magnetic Silica-Coated Amino-Modified Glycidyl Methacrylate Polymer Nanocomposite

A new magnetic amino-functionalized polymeric sorbent based on glycidyl methacrylate was synthesized and used in the separation of chromium Cr(VI) oxyanions sorption from aqueous solutions in a static batch system. The kinetic and isothermal parameters of the sorption process were determined. The experimental data were best fitted by a pseudo-second-order model with R² = 0.994 and χ² = 0.004. The sorption process of Cr(VI) removal by amino-functionalized sorbent was controlled by both intraparticle diffusion and liquid film diffusion. The equilibrium results showed that the sorption process is best described by the Freundlich model, followed closely by the Sips isotherm model, with a maximum sorption capacity of 64 mg/g. Quantum chemical modeling revealed that the sorption sites on the sorbent surface are fragments with diethylenetriamine and aminopropyl silane groups that coated the magnetic nanoparticles. The calculations showed that Cr(VI) oxyanions (Cr₂O₇^2-, CrO₄^2- and HCrO₄^-) bind to both sorption sites, with diethylenetriamine centers slightly favored. The X-ray photoelectron spectroscopy (XPS) spectra demonstrate that the chromium bound to the sorbent in the form of Cr(III), indicating that the Cr(VI) can be converted on the surface of the sorbent to a less harmful form Cr(III) due to the sorbent's chemical composition.