The Effect of PtRuIr Nanoparticle Crystallinity in Electrocatalytic Methanol Oxidation

Direct 3D Printing of Binder-Free Bimetallic Nanomaterials as Integrated Electrodes for Glycerol Oxidation with High Selectivity for Valuable C3 Products

Net-zero carbon strategies and green synthesis methodologies are key to realizing the United Nations' sustainable development goals (SDGs) on a global scale. An electrocatalytic glycerol oxidation reaction (GOR) holds the promise of upcycling excess glycerol from biodiesel production directly into precious hydrocarbon commodities that are worth orders of magnitude more than the glycerol feedstock. Despite years of research on the GOR, the synthesis process of nanoscale electrocatalysts still involves (1) prohibitive heat input, (2) expensive vacuum chambers, and (3) emission of toxic liquid pollutants. In this paper, these knowledge gaps are closed via developing a laser-assisted nanomaterial preparation (LANP) process to fabricate bimetallic nanocatalysts (1) at room temperature, (2) under an ambient atmosphere, and (3) without liquid waste emission. Specifically, PdCu nanoparticles with adjustable Pd:Cu content supported on few-layer graphene can be prepared using this one-step LANP method with performance that can rival state-of-the-art GOR catalysts. Beyond exhibiting high GOR activity, the LANP-fabricated PdCu/C nanomaterials with an optimized Pd:Cu ratio further deliver an exclusive product selectivity of up to 99% for partially oxidized C₃ products with value over 280000-folds that of glycerol. Through DFT calculations and in situ XAS experiments, the synergy between Pd and Cu is found to be responsible for the stability under GOR conditions and preference for C₃ products of LANP PdCu. This dry LANP method is envisioned to afford sustainable production of multimetallic nanoparticles in a continuous fashion as efficient electrocatalysts for other redox reactions with intricate proton-coupled electron transfer steps that are central to the widespread deployment of renewable energy schemes and carbon-neutral technologies.

Surfactant-Free Synthesis of Three-Dimensional Perovskite Titania-Based Micron-Scale Motifs Used as Catalytic Supports for the Methanol Oxidation Reaction

We synthesized and subsequently rationalized the formation of a series of 3D hierarchical metal oxide spherical motifs. Specifically, we varied the chemical composition within a family of ATiO3 (wherein "A" = Ca, Sr, and Ba) perovskites, using a two-step, surfactant-free synthesis procedure to generate structures with average diameters of ~3 microns. In terms of demonstrating the practicality of these perovskite materials, we have explored their use as supports for the methanol oxidation reaction (MOR) as a function of their size, morphology, and chemical composition. The MOR activity of our target systems was found to increase with decreasing ionic radius of the "A" site cation, in order of Pt/CaTiO3 (CTO) > Pt/SrTiO3 (STO) > Pt/BaTiO3 (BTO). With respect to morphology, we observed an MOR enhancement of our 3D spherical motifs, as compared with either ultra-small or cubic control samples. Moreover, the Pt/CTO sample yielded not only improved mass and specific activity values but also a greater stability and durability, as compared with both commercial TiO2 nanoparticle standards and precursor TiO2 templates.

Fe-doped mayenite electride composite with 2D reduced Graphene Oxide: As a non-platinum based, highly durable electrocatalyst for Oxygen Reduction Reaction

Since the last decades, non-precious metal catalysts (NPMC), especially iron based electrocatalysts show sufficient activity, potentially applicant in oxygen reduction reaction (ORR), however they only withstand considerable current densities at low operating potentials. On the other hand iron based electrocatalysts are not stable at elevated cathode potentials, which is essential for high energy competence, and its remains difficult to deal. Therefore, via this research a simple approach is demonstrated that allows synthesis of nanosize Fe-doped mayenite electride, [Ca24Al28O64]4+·(e-)4 (can also write as, C12A7-xFex:e-, where doping level, x = 1) (thereafter, Fe-doped C12A7:e-), consist of abundantly available elements with gram level powder material production, based on simple citrate sol-gel method. The maximum achieved conductivity of this first time synthesized Fe-doped C12A7:e- composite materials was 249 S/cm. Consequently, Fe-doped C12A7:e- composite is cost-effective, more active and highly durable precious-metal free electrocatalyst, with 1.03 V onset potential, 0.89 V (RHE) half-wave potential, and ~5.9 mA/cm2 current density, which is higher than benchmark 20% Pt/C (5.65 mA/cm2, and 0.84 V). The Fe-doped C12A7:e- has also higher selectivity for desired 4e- pathway, and more stable than 20 wt% Pt/C electrode with higher immunity towards methanol poisoning. Fe-doped C12A7:e- loses was almost zero of its original activity after passing 11 h compared to the absence of methanol case, indicates that to introduce methanol has almost negligible consequence for ORR performance, which makes it highly desirable, precious-metal free electrocatalyst in ORR. This is primarily described due to coexistence of Fe-doped C12A7:e- related active sites with reduced graphene oxide (rGO) with pyridinic-nitrogen, and their strong coupling consequence along their porous morphology textures. These textures assist rapid diffusion of molecules to catalyst active sites quickly. In real system maximum power densities reached to 243 and 275 mW/cm2 for Pt/C and Fe-doped C12A7:e- composite, respectively.

Recent Advances in Metallic Glass Nanostructures: Synthesis Strategies and Electrocatalytic Applications

Recent advances in metallic glass nanostructures (MGNs) are reported, covering a wide array of synthesis strategies, computational discovery, and design solutions that provide insight into distinct electrocatalytic applications. A brief introduction to the development and unique features of MGNs with an overview of top-down and bottom-up synthesis strategies is presented. Specifically, the morphology and structural analysis of several examples applying MGNs as electrodes are highlighted. Subsequently, a comprehensive discussion of commonly employed kinetic parameters and their connection with the unique material structures of MGNs on individual electrocatalytic reactions is made, including the hydrogen evolution reaction, oxygen reduction reaction, and alcohol (methanol or ethanol) oxidation reaction. Finally, a summary of the challenges and perspective on the future research and development relevant to MGNs as electrocatalysts is provided.

Evolution of nanoscale amorphous, crystalline and phase-segregated PtNiP nanoparticles and their electrocatalytic effect on methanol oxidation reaction

The design of amorphous noble metallic nanoparticle electrocatalysts is an important fundamental and applied research challenge because their surface is rich in low-coordination sites and defects which could act as the active sites in various catalytic processes. Here we describe new findings on the amorphous platinum-nickel-phosphorous nanoparticles supported on carbon black (PtNiP(a)/C) and the comparison between their catalytic activity and that of the nanoscale crystalline and phase-segregated PtNiP nanoparticles. The nanoscale amorphous, crystalline and phase-segregated catalysts were probed as a function of surface composition, particle size, and thermal treatment conditions using X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, selected area electron diffraction and electrochemical characterization. The results provide the experimental evidence in support of nanoscale amorphous, crystalline, and phase-segregated PtNiP nanoparticles evolution dependence on the catalyst synthesis temperature. More importantly, the results of the electrochemical performance investigation showed that the amorphous structure has not only better catalytic activity for methanol oxidation but also stronger tolerance to carbon monoxide poisoning compared to the crystalline and phase-segregated structure. Besides, the thermal control of the formation of nanoscale amorphous, crystalline and phase-segregated structured catalysts provided the opportunity for establishing the correlation between the nanoscale phase structures of the catalysts and their electrocatalytic activity in methanol oxidation reaction, which plays an important role in developing highly active electrocatalysts for direct methanol fuel cells.

Synthesis of ultrafine amorphous PtP nanoparticles and the effect of PtP crystallinity on methanol oxidation

Ultrafine amorphous PtP nanoparticles supported on carbon black were prepared. Comparison of electrocatalytic performance of the samples with different levels of crystallinity showed ultrafine amorphous PtP nanoparticles have high catalytic activity for methanol oxidation due to their small particle size and amorphous structure.