Comparison of Extruded and Sonicated Vesicles for Planar Bilayer Self-Assembly

Mechanism of Cationic Lipid Induced DNA Condensation: Lipid-DNA Coordination and Divalent Cation Charge Fluctuations

The condensation of nucleic acids by lipids is a widespread phenomenon in biology with crucial implications for drug delivery. However, the mechanisms of DNA assembly in lipid bilayers remain insufficiently understood due to challenges in measuring and assessing each component's contribution in the lipid-DNA-cation system. This study uses all-atom molecular dynamics simulations to investigate DNA condensation in cationic lipid bilayers. Our exhaustive exploration of the thermodynamic factors reveals unique roles for phospholipid head groups and cations. We observed that bridging cations between lipid and DNA drastically reduce charges, while mobile magnesium cations "ping-ponging" between double strands create charge fluctuations. While the first factor stabilizes the DNA-lipid complex, the latter creates attractive forces to induce the spontaneous condensation of DNAs. This novel mechanism not only sheds light on the current data regarding cationic lipid-induced DNA condensation but also provides potential design strategies for creating efficient gene delivery vectors for drug delivery.

Lipid loss and compositional change during preparation of liposomes by common biophysical methods

Liposomes are widely used as model lipid membrane platforms in many fields, ranging from basic biophysical studies to drug delivery and biotechnology applications. Various methods exist to prepare liposomes, but common procedures include thin-film hydration followed by extrusion, freeze-thaw, and/or sonication. These procedures have the potential to produce liposomes at specific concentrations and membrane compositions, and researchers often assume that the concentration and composition of their liposomes are similar to, if not identical, to what would be expected if no lipid loss occurred during preparation. However, lipid loss and concomitant biasing of lipid composition can in principle occur at any preparation step due to nonideal mixing, lipid-surface interactions, etc. Here, we report a straightforward method using HPLC-ELSD to quantify the lipid concentration and membrane composition of liposomes, and apply that method to study the preparation of simple POPC/cholesterol liposomes. We examine many common steps in liposome formation, including vortexing during re-suspension, hydration of the lipid film, extrusion, freeze-thaw, sonication, and the percentage of cholesterol in the starting mixture. We found that the resuspension step can play an outsized role in determining the overall lipid loss (up to ~50% under seemingly rigorous procedures). The extrusion step yielded smaller lipid losses (~10-20%). Freeze-thaw and sonication could both be employed to improve lipid yields. Hydration times up to 60 minutes and increasing cholesterol concentrations up to 50 mole% had little influence on lipid recovery. Fortunately, even conditions with large lipid loss did not substantially influence the target membrane composition more than ~5% under the conditions we tested. From our results, we identify best practices for producing maximum levels of lipid recovery and minimal changes to lipid composition during liposome preparation protocols. We expect our results can be leveraged for improved preparation of model membranes by researchers in many fields.

Interaction of L-phenylalanine with carbonyl groups in mixed lipid membranes

The interaction of L-Phe with the membrane components, i.e., lipids and proteins, has been discussed in the current literature due to the interest to understand the effect of single amino acids in relation to the formation of amyloid aggregates. In the present work, it is shown that L-Phe interacts with 9:1 DMPC (1,2-dimyristoyl-sn-glycero-3 phosphocholine)/DPPC (1,2-dipalmitoyl-sn-glycero-3 phosphocholine) mixtures but not in the 1:9 one. An important observation is that the interaction disappears when DPPC is replaced by diether PC (2-di-O-hexadecyl-sn-glycero-3-phosphocholine) a lipid lacking carbonyl groups (CO). This denotes that CO groups may interact specifically with L-Phe in accordance with the appearance of a new peak observed by Infrared spectroscopy (FTIR-ATR). The interaction of L-Phe affects the compressibility pattern of the 9:1 DMPC/DPPC mixture which is congruent with the changes observed by Raman spectra. The specific interaction of L-Phe with CO, propagates to phosphate and choline groups in this particular mixture as analyzed by FTIR-ATR spectroscopy and is absent when DMPC is dopped with diether PC.

Molecular fingerprinting of biological nanoparticles with a label-free optofluidic platform

Label-free detection of multiple analytes in a high-throughput fashion has been one of the long-sought goals in biosensing applications. Yet, for all-optical approaches, interfacing state-of-the-art label-free techniques with microfluidics tools that can process small volumes of sample with high throughput, and with surface chemistry that grants analyte specificity, poses a critical challenge to date. Here, we introduce an optofluidic platform that brings together state-of-the-art digital holography with PDMS microfluidics by using supported lipid bilayers as a surface chemistry building block to integrate both technologies. Specifically, this platform fingerprints heterogeneous biological nanoparticle populations via a multiplexed label-free immunoaffinity assay with single particle sensitivity. First, we characterise the robustness and performance of the platform, and then apply it to profile four distinct ovarian cell-derived extracellular vesicle populations over a panel of surface protein biomarkers, thus developing a unique biomarker fingerprint for each cell line. We foresee that our approach will find many applications where routine and multiplexed characterisation of biological nanoparticles are required.

Extracellular vesicles in cancer: challenges and opportunities for clinical laboratories

Extracellular vesicles (EVs) are nano-sized particles secreted by most cells. They transport different types of biomolecules (nucleic acids, proteins, and lipids) characteristic of their tissue or cellular origin that can mediate long-distance intercellular communication. In the case of cancer, EVs participate in tumor progression by modifying the tumor microenvironment, favoring immune tolerance and metastasis development. Consequently, EVs have great potential in liquid biopsy for cancer diagnosis, prognosis and follow-up. In addition, EVs could have a role in cancer treatment as a targeted drug delivery system. The intense research in the EV field has resulted in hundreds of patents and the creation of biomedical companies. However, methodological issues and heterogeneity in EV composition have hampered the advancement of EV validation trials and the development of EV-based diagnostic and therapeutic products. Consequently, only a few EV biomarkers have moved from research to clinical laboratories, such as the ExoDx Prostate IntelliScore (EPI) test, a CLIA/FDA-approved EV prostate cancer diagnostic test. In addition, the number of large-scale multicenter studies that would clearly define biomarker performance is limited. In this review, we will critically describe the different types of EVs, the methods for their enrichment and characterization, and their biological role in cancer. Then, we will specially focus on the parameters to be considered for the translation of EV biology to the clinic laboratory, the advances already made in the field of EVs related to cancer diagnosis and treatment, and the issues still pending to be solved before EVs could be used as a routine tool in oncology.

Kinetic control of liposome size by direct lipid transfer

Spontaneous lipid vesiculation and related size distribution are traditionally studied in the framework of equilibrium thermodynamics and continuum mechanics, overlooking the kinetic aspects of the process. In the scenario of liposomes consisting of different lipid molecules dispersed in the same medium - a non-equilibrium situation -, the system evolves driven by lipid monomer transfer among the different liposomes. This process encompasses time-dependent changes in liposome size and size distribution, thus predicting size and composition at a given time would entail the control of the size of liposomes by kinetic means, an asset in the framework of diagnostics and synthetic biology. We introduce a direct transfer model, based on the fact that monomers are highly reactive species and apply it to saturated phospholipid molecules differing in hydrophobic chain length. Considering a well-defined gamma-type liposome size distribution, we demonstrate a clear liposome size-composition correlation and are able to predict liposome size and size distribution at any time in the transfer process. The size-composition correlation opens up new prospects for the control of the self-assembling properties of lipids and thereby the control of the liposome size.

Carbon Dots-Biomembrane Interactions and Their Implications for Cellular Drug Delivery

The effect of carbon dots (CDs) on a model blayer membrane was studied as a means of comprehending their ability to affect cell membranes. Initially, the interaction of N-doped carbon dots with a biophysical liposomal cell membrane model was investigated by dynamic light scattering, z-potential, temperature-modulated differential scanning calorimetry, and membrane permeability. CDs with a slightly positive charge interacted with the surface of the negative-charged liposomes and evidence indicated that the association of CDs with the membrane affects the structural and thermodynamic properties of the bilayer; most importantly, it enhances the bilayer's permeability against doxorubicin, a well-known anticancer drug. The results, like those of similar studies that surveyed the interaction of proteins with lipid membranes, suggest that carbon dots are partially embedded in the bilayer. In vitro experiments employing breast cancer cell lines and human healthy dermal cells corroborated the findings, as it was shown that the presence of CDs in the culture medium selectively enhanced cell internalization of doxorubicin and, subsequently, increased its cytotoxicity, acting as a drug sensitizer.

Skin drug delivery using lipid vesicles: A starting guideline for their development

Lipid vesicles can provide a cost-effective enhancement of skin drug absorption when vesicle production process is optimised. It is an important challenge to design the ideal vesicle, since their properties and features are related, as changes in one affect the others. Here, we review the main components, preparation and characterization methods commonly used, and the key properties that lead to highly efficient vesicles for transdermal drug delivery purposes. We stand by size, deformability degree and drug loading, as the most important vesicle features that determine the further transdermal drug absorption. The interest in this technology is increasing, as demonstrated by the exponential growth of publications on the topic. Although long-term preservation and scalability issues have limited the commercialization of lipid vesicle products, freeze-drying and modern escalation methods overcome these difficulties, thus predicting a higher use of these technologies in the market and clinical practice.

[99mTc]Technetium-Labeled Niosomes: Radiolabeling, Quality Control, and In Vitro Evaluation

The aim of this research was to develop technetium-99m ([^99mTc]Tc)-radiolabeled niosomes and evaluate the cancer cell incorporation capacity of radiolabeled niosomes. For this purpose, niosome formulations were developed by film hydration method, and prepared niosomes were characterized to particle size, polydispersity index (PdI), ζ-potential value, and image profile. Then, niosomes were radiolabeled with [^99mTc]Tc using stannous salts (chloride) as a reducing agent. The radiochemical purity (RP) and stability in different mediums of the niosomes were assessed by ascending radioactive thin-layer chromatography (RTLC) and radioactive ultrahigh-performance liquid chromatography (R-UPLC) methods. Also, the partition coefficient value of radiolabeled niosomes was determined. The cell incorporation of [^99mTc]Tc-labeled niosome formulations, as well as reduced/hydrolyzed (R/H)-[^99mTc]NaTcO₄ in the HT-29 (human colorectal adenocarcinoma) cells, was then assessed. According to the obtained results, the spherical niosomes had a particle size of 130.5 ± 1.364 nm, a PdI value of 0.250 ± 0.023, and a negative charge of -35.4 ± 1.06 mV. The niosome formulations were effectively radiolabeled with [^99mTc]Tc using 500 μg mL^-1 stannous chloride for 15 min, and RP was found to be over 95%. [^99mTc]Tc-niosomes showed good in vitro stability in every system for up to 6 h. The log P value of radiolabeled niosomes was found as -0.66 ± 0.02. Compared to R/H-[^99mTc]NaTcO₄ (34.18 ± 1.56%), the incorporation percentages of [^99mTc]Tc-niosomes (88.45 ± 2.54%) were shown to be higher in cancer cells. In conclusion, the newly developed [^99mTc]Tc-niosomes showed good prototype for potential use in nuclear medicine imaging in the near future. However, further investigations, such as drug encapsulation and biodistribution studies, should be performed, and our studies are continuing.

High-Throughput Cell-Free Screening of Eukaryotic Membrane Proteins in Lipidic Mimetics

Membrane proteins (MPs) carry out important functions in the metabolism of cells, such as the detection of extracellular activities and the transport of small molecules across the plasma and organelle membranes. Expression of MPs for biochemical, biophysical, and structural analysis is in most cases achieved by overexpression of the desired target in an appropriate host, such as a bacterium. However, overexpression of MPs is usually toxic to the host cells and can lead to aggregation of target protein and to resistance to detergent extraction. An alternative to cell-based MP expression is cell-free (CF), or in vitro, expression. CF expression of MPs has several advantages over cell-based methods, including lack of toxicity issues, no requirement for detergent extraction, and direct incorporation of target proteins in various lipidic mimetics. This article describes a high-throughput method for the expression and purification of eukaryotic membrane proteins used in the author's lab. Basic Protocol 1 describes the selection and cloning of target genes into appropriate vectors for CF expression. Basic Protocol 2 describes the assembly of CF reactions for high-throughput screening. Basic Protocol 3 outlines methods for purification and detection of target proteins. Support Protocols 1-6 describe various accessory procedures: amplification of target, treatment of vectors to prepare them for ligation-independent cloning, and the preparation of S30 extract, T7 RNA polymerase, liposomes, and nanodiscs. © 2022 Wiley Periodicals LLC. Basic Protocol 1: Target selection, construct design, and cloning into pET-based expression vectors Support Protocol 1: Amplification of target DNA Support Protocol 2: Preparation of ligation-independent cloning (LIC)-compatible vectors Basic Protocol 2: Assembly of small-scale cell-free reactions for high-throughput screening Support Protocol 3: Preparation of Escherichia coli S30 extract Support Protocol 4: Preparation of T7 RNA polymerase Support Protocol 5: Preparation of liposomes Support Protocol 6: Preparation of nanodiscs Basic Protocol 3: Purification and detection of cell-free reaction products.

Amyloids Formed by Nonaromatic Amino Acid Methionine and Its Cross with Phenylalanine Significantly Affects Phospholipid Vesicle Membrane: An Insight into Hypermethioninemia Disorder

The incorrect metabolic breakdown of the nonaromatic amino acid methionine (Met) leads to the disorder called hypermethioninemia via an unknown mechanism. To understand the molecular level pathogenesis of this disorder, we prepared a DMPC lipid membrane, the mimicking setup of the cell membrane, and explored the effect of the millimolar level of Met on it. We found that Met forms toxic fibrillar aggregates that disrupt the rigidity of the membrane bilayer, and increases the dynamic response of water molecules surrounding the membrane as well as the heterogeneity of the membrane. Such aggregates strongly deform red blood cells. This opens the requirement to consider therapeutic antagonists either to resist or to inhibit the toxic amyloid aggregates against hypermethioninemia. Moreover, such disrupting effect on membrane bilayer and cytotoxicity along with deformation effect on RBC by the cross amyloids of Met and Phenylalanine (Phe) was found to be most virulent. This exclusive observation of the enhanced virulent effect of the cross amyloids is expected to be an informative asset to explain the coexistence of two amyloid disorders.

Stem cell membrane, stem cell-derived exosomes and hybrid stem cell camouflaged nanoparticles: A promising biomimetic nanoplatforms for cancer theranostics

Nanomedicine research has advanced dramatically in recent decades. Nonetheless, traditional nanomedicine faces significant obstacles such as the low concentration of the drug at target sites and accelerated removal of the drug from blood circulation. Various techniques of nanotechnology, including cell membrane coating, have been developed to address these challenges and to improve targeted distribution and redcue cell membrane-mediated immunogenicity. Recently, stem cell (SC) membranes, owing to their immunosuppressive and regenerative properties, have grabbed attention as attractive therapeutic carriers for targeting specific tissues or organs. Bioengineering strategies that combine synthetic nanoparticles (NPs) with SC membranes, because of their homing potential and tumor tropism, have recently received a lot of publicity. Several laboratory experiments and clinical trials have indicated that the benefits of SC-based technologies are mostly related to the effects of SC-derived exosomes (SC-Exos). Exosomes are known as nano-sized extracellular vehicles (EVs) that deliver particular bioactive molecules for cell-to-cell communication. In this regard, SC-derived exosome membranes have recently been employed to improve the therapeutic capability of engineered drug delivery vehicles. Most recently, for further enhancing NPs' functionality, a new coating approach has been offered that combines membranes from two separate cells. These hybrid membrane delivery vehicles have paved the way for the development of biocompatible, high-efficiency, biomimetic NPs with varying hybrid capabilities that can overcome the drawbacks of present NP-based treatment techniques. This review explores stem cell membranes, SC-Exos, and hybrid SC-camouflaged NPs preparation methods and their importance in cancer therapy.

Fluorescence Recovery after Photobleaching in Colloidal Science: Introduction and Application

FRAP (fluorescence recovery after photo bleaching) is a method for determining diffusion in material science. In industrial applications such as medications, foods, Medtech, hygiene, and textiles, the diffusion process has a substantial influence on the overall qualities of goods. All these complex and heterogeneous systems have diffusion-based processes at the local level. FRAP is a fluorescence-based approach for detecting diffusion; in this method, a high-intensity laser is made for a brief period and then applied to the samples, bleaching the fluorescent chemical inside the region, which is subsequently filled up by natural diffusion. This brief Review will focus on the existing research on employing FRAP to measure colloidal system heterogeneity and explore diffusion into complicated structures. This description of FRAP will be followed by a discussion of how FRAP is intended to be used in colloidal science. When constructing the current Review, the most recent publications were reviewed for this assessment. Because of the large number of FRAP articles in colloidal research, there is currently a dearth of knowledge regarding the growth of FRAP's significance to colloidal science. Colloids make up only 2% of FRAP papers, according to ISI Web of Knowledge.

Nanoarchitectured air-stable supported lipid bilayer incorporating sucrose-bicelle complex system

Cell-membrane-mimicking supported lipid bilayers (SLBs) provide an ultrathin, self-assembled layer that forms on solid supports and can exhibit antifouling, signaling, and transport properties among various possible functions. While recent material innovations have increased the number of practically useful SLB fabrication methods, typical SLB platforms only work in aqueous environments and are prone to fluidity loss and lipid-bilayer collapse upon air exposure, which limits industrial applicability. To address this issue, herein, we developed sucrose-bicelle complex system to fabricate air-stable SLBs that were laterally mobile upon rehydration. SLBs were fabricated from bicelles in the presence of up to 40 wt% sucrose, which was verified by quartz crystal microbalance-dissipation (QCM-D) and fluorescence recovery after photobleaching (FRAP) experiments. The sucrose fraction in the system was an important factor; while 40 wt% sucrose induced lipid aggregation and defects on SLBs after the dehydration-rehydration process, 20 wt% sucrose yielded SLBs that exhibited fully recovered lateral mobility after these processes. Taken together, these findings demonstrate that sucrose-bicelle complex system can facilitate one-step fabrication of air-stable SLBs that can be useful for a wide range of biointerfacial science applications.

The Dietary Nutrient Trimethylamine N-Oxide Affects the Phospholipid Vesicle Membrane: Probable Route to Adverse Intake

Trimethylamine N-oxide (TMAO), a choline-containing dietary supplement obtained from red meat, egg, and other animal resources, on excess accumulation is known to cause cardiovascular diseases (CVDs) like atherosclerosis. To understand the molecular mechanism of the pathogenesis of TMAO-induced CVDs, we have set up 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) membrane in water that mimicked the endothelial cell membrane-blood interface of the artery wall and investigated the effect of an elevated concentration of TMAO on the membrane. We found that TMAO exerts an "action at a distance" mechanism through electrostatic force of attraction that significantly alters various properties of the membrane, like hydrophobicity, lateral organization, and interfacial water dynamics, which elevates the rigidity of the membrane. Such an effect was found to be further amplified in the presence of known causes of CVDs, i.e., high content of cholesterol (Chol). Therefore, TMAO-induced membrane rigidity may restrict the intrinsic elasticity of an artery membrane, expected to be introducing "hardening of the arteries", which makes the membrane atherosclerotic.

Cytochalasin B Treatment and Osmotic Pressure Enhance the Production of Extracellular Vesicles (EVs) with Improved Drug Loading Capacity

Extracellular vesicles (EVs) have been highlighted as novel drug carriers due to their unique structural properties and intrinsic features, including high stability, biocompatibility, and cell-targeting properties. Although many efforts have been made to harness these features to develop a clinically effective EV-based therapeutic system, the clinical translation of EV-based nano-drugs is hindered by their low yield and loading capacity. Herein, we present an engineering strategy that enables upscaled EV production with increased loading capacity through the secretion of EVs from cells via cytochalasin-B (CB) treatment and reduction of EV intravesicular contents through hypo-osmotic stimulation. CB (10 µg/mL) promotes cells to extrude EVs, producing ~three-fold more particles than through natural EV secretion. When CB is induced in hypotonic conditions (223 mOsm/kg), the produced EVs (hypo-CIMVs) exhibit ~68% less intravesicular protein, giving 3.4-fold enhanced drug loading capacity compared to naturally secreted EVs. By loading doxorubicin (DOX) into hypo-CIMVs, we found that hypo-CIMVs efficiently deliver their drug cargos to their target and induce up to ~1.5-fold more cell death than the free DOX. Thus, our EV engineering offers the potential for leveraging EVs as an effective drug delivery vehicle for cancer treatment.

Optimization of critical parameters for coating of polymeric nanoparticles with plasma membrane vesicles by sonication

Top-down functionalization of nanoparticles with cellular membranes imparts nanoparticles with enhanced bio-interfacing capabilities. Initial methods for membrane coating involved physical co-extrusion of nanoparticles and membrane vesicles through a porous membrane; however, recent works employ sonication as the disruptive force to reform membranes around the surface of nanoparticles. Although sonication is widely used, there remains a paucity of information on the effects of sonication variables on coating efficiency, leading to inconsistent membrane coating across studies. In this work, we present a systematic analysis of the sonication parameters that influence the membrane coating. The results showed that sonication amplitude, time, temperature, membrane ratio, sample volume, and density need to be considered in order to optimize membrane coating of polymeric nanoparticles.

Therapeutic roles of mesenchymal stem cell-derived extracellular vesicles in cancer

Extracellular vesicles (EVs) are cell-derived membrane structures enclosing proteins, lipids, RNAs, metabolites, growth factors, and cytokines. EVs have emerged as essential intercellular communication regulators in multiple physiological and pathological processes. Previous studies revealed that mesenchymal stem cells (MSCs) could either support or suppress tumor progression in different cancers by paracrine signaling via MSC-derived EVs. Evidence suggested that MSC-derived EVs could mimic their parental cells, possessing pro-tumor and anti-tumor effects, and inherent tumor tropism. Therefore, MSC-derived EVs can be a cell-free cancer treatment alternative. This review discusses different insights regarding MSC-derived EVs' roles in cancer treatment and summarizes bioengineered MSC-derived EVs’ applications as safe and versatile anti-tumor agent delivery platforms. Meanwhile, current hurdles of moving MSC-derived EVs from bench to bedside are also discussed.

Membrane Derived Vesicles as Biomimetic Carriers for Targeted Drug Delivery System

Extracellular vesicles (EVs) are membrane vesicles (MVs) playing important roles in various cellular and molecular functions in cell-to-cell signaling and transmitting molecular signals to adjacent as well as distant cells. The preserved cell membrane characteristics in MVs derived from live cells, give them great potential in biological applications. EVs are nanoscale particulates secreted from living cells and play crucial roles in several important cellular functions both in physiological and pathological states. EVs are the main elements in intercellular communication in which they serve as carriers for various endogenous cargo molecules, such as RNAs, proteins, carbohydrates, and lipids. High tissue tropism capacity that can be conveniently mediated by surface molecules, such as integrins and glycans, is a unique feature of EVs that makes them interesting candidates for targeted drug delivery systems. The cell-derived giant MVs have been exploited as vehicles for delivery of various anticancer agents and imaging probes and for implementing combinational phototherapy for targeted cancer treatment. Giant MVs can efficiently encapsulate therapeutic drugs and deliver them to target cells through the membrane fusion process to synergize photodynamic/photothermal treatment under light exposure. EVs can load diagnostic or therapeutic agents using different encapsulation or conjugation methods. Moreover, to prolong the blood circulation and enhance the targeting of the loaded agents, a variety of modification strategies can be exploited. This paper reviews the EVs-based drug delivery strategies in cancer therapy. Biological, pharmacokinetics and physicochemical characteristics, isolation techniques, engineering, and drug loading strategies of EVs are discussed. The recent preclinical and clinical progresses in applications of EVs and oncolytic virus therapy based on EVs, the clinical challenges and perspectives are discussed.

Rapid Production and Purification of Dye-Loaded Liposomes by Electrodialysis-Driven Depletion

Liposomes are spherical-shaped vesicles that enclose an aqueous milieu surrounded by bilayer or multilayer membranes formed by self-assembly of lipid molecules. They are intensively exploited as either model membranes for fundamental studies or as vehicles for delivery of active substances in vivo and in vitro. Irrespective of the method adopted for production of loaded liposomes, obtaining the final purified product is often achieved by employing multiple, time consuming steps. To alleviate this problem, we propose a simplified approach for concomitant production and purification of loaded liposomes by exploiting the Electrodialysis-Driven Depletion of charged molecules from solutions. Our investigations show that electrically-driven migration of charged detergent and dye molecules from solutions that include natural or synthetic lipid mixtures leads to rapid self-assembly of loaded, purified liposomes, as inferred from microscopy and fluorescence spectroscopy assessments. In addition, the same procedure was successfully applied for incorporating PEGylated lipids into the membranes for the purpose of enabling long-circulation times needed for potential in vivo applications. Dynamic Light Scattering analyses and comparison of electrically-formed liposomes with liposomes produced by sonication or extrusion suggest potential use for numerous in vitro and in vivo applications.

Advancements in liposome technology: Preparation techniques and applications in food, functional foods, and bioactive delivery: A review

Liposomes play a significant role in encapsulation of various bioactive compounds (BACs), including functional food ingredients to improve the stability of core. This technology can be used for promoting an effective application in functional food and nutraceuticals. Incorporation of traditional and emerging methods for the developments of liposome for loading BACs resulted in viable and stable liposome formulations for industrial applications. Thus, the advance technologies such as supercritical fluidic methods, microfluidization, ultrasonication with traditional methods are revisited. Liposomes loaded with plant and animal BACs have been introduced for functional food and nutraceutical applications. In general, application of liposome systems improves stability, delivery, and bioavailability of BACs in functional food systems and nutraceuticals. This review covers the current techniques and methodologies developed and practiced in liposomal preparation and application in functional foods.

Contribution of Particle-Induced Lysosomal Membrane Hyperpolarization to Lysosomal Membrane Permeabilization

Lysosomal membrane permeabilization (LMP) has been proposed to precede nanoparticle-induced macrophage injury and NLRP3 inflammasome activation; however, the underlying mechanism(s) of LMP is unknown. We propose that nanoparticle-induced lysosomal hyperpolarization triggers LMP. In this study, a rapid non-invasive method was used to measure changes in lysosomal membrane potential of murine alveolar macrophages (AM) in response to a series of nanoparticles (ZnO, TiO2, and CeO2). Crystalline SiO2 (micron-sized) was used as a positive control. Changes in cytosolic potassium were measured using Asante potassium green 2. The results demonstrated that ZnO or SiO2 hyperpolarized the lysosomal membrane and decreased cytosolic potassium, suggesting increased lysosome permeability to potassium. Time-course experiments revealed that lysosomal hyperpolarization was an early event leading to LMP, NLRP3 activation, and cell death. In contrast, TiO2- or valinomycin-treated AM did not cause LMP unless high doses led to lysosomal hyperpolarization. Neither lysosomal hyperpolarization nor LMP was observed in CeO2-treated AM. These results suggested that a threshold of lysosomal membrane potential must be exceeded to cause LMP. Furthermore, inhibition of lysosomal hyperpolarization with Bafilomycin A1 blocked LMP and NLRP3 activation, suggesting a causal relation between lysosomal hyperpolarization and LMP.

NANOG Decoy Oligodeoxynucleotide-Encapsulated Niosomes Nanocarriers: A Promising Approach to Suppress the Metastatic Properties of U87 Human Glioblastoma Multiforme Cells

Recently, advances in the synthesis and development of multifunctional nanoparticle platforms have opened up great opportunities and advantages for specifically targeted delivery of genes of interest. BSA-coated niosome structures (NISM@B) can potentially improve the efficiency in vitro delivery of nucleic acid molecules and the transfection of genes. Few studies have reported the combined use of niosomes with nucleic acid as therapeutic agents or decoy oligodeoxynucleotides (ODNs). Herein, we synthesized NISM@B to encapsulate NANOG decoy ODN (NISM@B-DEC), after which the physicochemical characteristics and in vitro and in vivo properties of NISM@B-DEC were investigated. Our results regarding physicochemical characteristics revealed that the stable niosome nanocarrier system was successfully synthesized with a regular spherical shape and narrow size distribution with proper zeta-potential values and had an appropriate biocompatibility. The ODN release from the niosome nanocarrier system exhibited controlled and pH-dependent behavior as the best models to explain the ODN release profile. NISM@B-DEC was efficiently taken up by human glioblastoma cells (U87) and significantly inhibited cell growth. Finally, blockage of the NANOG pathway by NISM@B-DEC resulted in G1 cell cycle arrest, apoptosis, and cell death. In addition, NISM@B-DEC caused a significant decrease in tumor formation and improved wound-healing efficiency of the U87 cells. These findings confirm that NISM@B-DEC could potentially suppress the metastatic ability of these cells. It can be concluded that the presented nanocarrier system can be a promising approach for targeted gene delivery in cancer therapy.

Novel Fast and Reliable Method for Nano-Erythrosome Production Using Shear Force

Purpose

The production of nano-erythrosomes (NEs) by extrusion, which is considered the “gold standard”, has several disadvantages such as difficult equipment assembly, long procedure time, variable pressure, and problems with sterility. An alternative approach, using ultrasound probe, has been shown to overheat the sample and have suboptimal results compared to the extrusion method. In our study, we propose, develop, and test a new method for the fabrication of NEs based on shear force and then compare it to the “gold standard” extrusion approach.

Methods

The new method consists of mechanical shear force disruption of the hemoglobin-depleted erythrocyte ghost membranes, with the aid of a rotor stator based tissue homogenizer. Using the same batches of erythrocyte ghost membranes, we compared NEs produced by shear force to NEs produced by the well-established extrusion approach. NEs were characterized for yield, size, encapsulation efficiency, morphology, and stability by flow cytometry (FC), transmission electron microscopy (TEM), and zeta potential analysis.

Results

The shear force based process was easier to set up, significantly faster, had better sterility control, and decreased variability between batches. The shear force method generated NEs with the desired size distribution (particles diameter ~125 nm), which were morphologically and functionally equivalent to the NEs produced by extrusion. NEs produced by shear force were stable in terms of counts, size, and fluorescence intensity for 3 weeks at +4°C. Moreover, they showed colloidal stability and minimal influence to centrifugal stress, turbulence shock, and hemolytic potential.

Conclusion

The newly proposed shear force method allows faster, easier, and highly reproducible NEs production when compared to the conventional extrusion approach. The new setup allows simultaneous production of sterile batches of NEs, which have homogenous size distribution, good stability, and improved shelf life storage. The ability of the shear force method to process also high concentration samples indicates a future potential development of large-scale NEs production and industrial application, which has been a challenge for the extrusion method.

Effect of cholesterol on the hydration properties of ester and ether lipid membrane interphases

Fluorescence spectroscopy and Molecular Dynamics results show that cholesterol reduces water along the chains in ether lipids by changing the water distribution pattern between tightly and loosely bound water molecules. Water distribution was followed by emission spectra and generalized polarization of 6-dodecanoyl-2-dimethyl aminonaphthalene (Laurdan) inserted in 1,2-dimiristoyl-sn-glycero-3-phosphocholine (DMPC) and 1,2-di-O-tetradecyl-sn-glycero-3-phosphocholine (14: 0 Diether PC) membranes. Molecular Dynamics simulations indicate that the action of cholesterol could be different in ether PC in comparison to ester PC. In addition, Cholesterol seems to act "per se" as an additional hydration center in ether lipids. Regardless of the phase state, cholesterol both in DMPC and 14:0 Diether PC vesicles, changed the distribution of water molecules decreasing the dipole relaxation of the lipid interphase generating an increase in the non-relaxable population. Above 10% Cholesterol/14:0 Diether PC ratio vesicles' interphase present an environment around Laurdan molecules similar to that corresponding to ester PC.

Factors affecting the morphology of some organic and inorganic nanostructures for drug delivery: characterization, modifications, and toxicological perspectives

Introduction: In this review, we aim to highlight the impact of various processes and formulation variables influencing the characteristics of certain surfactant-based nanoconstructs for drug delivery. Areas covered: The review includes the discussion on processing parameters for the preparation of nanoconstructs, especially those made up of surfactants. Articles published in last 15 years (437) were reviewed, 381 articles were selected for data review and most appropriate articles (215) were included in article. Effect of variables such as surfactant concentration and type, membrane additives, temperature, and pH-dependent transitions on morphology has been highlighted along with effect of shape on nanoparticle uptake by cells. Various characterization techniques explored for these nanostructures with respect to size, morphology, lamellarity, distribution, etc., and a separate section on polymeric vesicles and the influence of block copolymers, type of block copolymer, control of block length, interaction of multiple block copolymers on the structure of polymersomes and chimeric nanostructures have been discussed. Finally, applications, modification, degradation, and toxicological aspects of these drug delivery systems have been highlighted. Expert opinion: Parameters influencing the morphology of micelles and vesicles can directly or indirectly affect the efficacy of small molecule cellular internalization as well as uptake in the case of biologicals.[Figure: see text].

Antagonist Effects of l-Phenylalanine and the Enantiomeric Mixture Containing d-Phenylalanine on Phospholipid Vesicle Membrane

One of the congenital flaws of metabolism, phenylketonuria (PKU), is known to be related to the self-assembly of toxic fibrillar aggregates of phenylalanine (Phe) in blood at elevated concentrations. Our experimental findings using l-phenylalanine (l-Phe) at millimolar concentration suggest the formation of fibrillar morphologies in the dry phase, which in the solution phase interact strongly with the model membrane composed of 1,2-diacyl-sn-glycero-phosphocholine (LAPC) lipid, thereby decreasing the rigidity (or increasing the fluidity) of the membrane. The hydrophobic interaction, in addition to the electrostatic attraction of Phe with the model membrane, is found to be responsible for such phenomena. On the contrary, various microscopic observations reveal that such fibrillar morphologies of l-Phe are severely ruptured in the presence of its enantiomer d-phenylalanine (d-Phe), thereby converting the fibrillar morphologies into crushed flakes. Various biophysical studies, including the solvation dynamics experiment, suggest that this l-Phe in the presence of d-Phe, when interacting with the same model membrane, now reverts the rigidity of the membrane, i.e., increases the rigidity of the membrane, which was lost due to interaction with l-Phe exclusively. Fluorescence anisotropy measurements also support this reverse rigid character of the membrane in the presence of an enantiomeric mixture of amino acids. A comprehensive understanding of the interaction of Phe with the model membrane is further pursued at the single-molecular fluorescence detection level using fluorescence correlation spectroscopy (FCS) experiments. Therefore, our experimental conclusion interprets a linear correlation between increased permeability and enhanced fluidity of the membrane in the presence of l-Phe and certifies d-Phe as a therapeutic modulator of l-Phe fibrillar morphologies. Further, the study proposes that the rigidity of the membrane lost due to interaction with l-Phe was reinstated-in fact, increased-in the presence of the enantiomeric mixture containing both d- and l-Phe.

A platform for light-controlled formation of free-stranding lipid membranes

The engineering of artificial cells is one of the most significant scientific challenges. Thus, controlled fabrication and in situ monitoring of biomimetic nanoscale objects are among the central issues in current science and technology. Studies of transmembrane channels and cell mechanics often require the formation of lipid bilayers (LBs), their modification and their transfer to a particular place. We present here a novel approach for remotely controlled manipulation of LBs. Layer-by-layer deposition of polyethyleneimine and poly(sodium 4-styrenesulfonate) on a nanostructured TiO 2 photoanode was performed to obtain a surface with the desired net charge and to enhance photocatalytic performance. The LB was deposited on top of a multi-layer positive polymer cushion by the dispersion of negative vesicles. The separation distance between the electrostatically linked polyelectrolyte cushion and the LB can be adjusted by changing the environmental pH, as zwitter-ionic lipid molecules undergo pH-triggered charge-shifting. Protons were generated remotely by photoanodic water decomposition on the TiO 2 surface under 365 nm illumination. The resulting pH gradient was characterized by scanning vibrating electrode and scanning ion-selective electrode techniques. The light-induced reversible detachment of the LB from the polymer-cushioned photoactive substrate was found to correlate with suggested impedance models.

Extracellular vesicle-based drug delivery systems for cancer treatment

Extracellular vesicles (EVs) are naturally occurring cell-secreted nanoparticles that play important roles in many physiological and pathological processes. EVs enable intercellular communication by serving as delivery vehicles for a wide range of endogenous cargo molecules, such as RNAs, proteins, carbohydrates, and lipids. EVs have also been found to display tissue tropism mediated by surface molecules, such as integrins and glycans, making them promising for drug delivery applications. Various methods can be used to load therapeutic agents into EVs, and additional modification strategies have been employed to prolong circulation and improve targeting. This review gives an overview of EV-based drug delivery strategies in cancer therapy.

Characterization, optimization, and in vitro evaluation of Technetium-99m-labeled niosomes

Background and purpose

Niosomes are nonionic surfactant-based vesicles that exhibit certain unique features which make them favorable nanocarriers for sustained drug delivery in cancer therapy. Biodistribution studies are critical in assessing if a nanocarrier system has preferential accumulation in a tumor by enhanced permeability and retention effect. Radiolabeling of nanocarriers with radioisotopes such as Technetium-99m (^99mTc) will allow for the tracking of the nanocarrier noninvasively via nuclear imaging. The purpose of this study was to formulate, characterize, and optimize ^99mTc-labeled niosomes.

Methods

Niosomes were prepared from a mixture of sorbitan monostearate 60, cholesterol, and synthesized D-α-tocopherol polyethylene glycol 1000 succinate-diethylenetriaminepentaacetic acid (synthesis confirmed by ¹H and ¹³C nuclear magnetic resonance spectroscopy). Niosomes were radiolabeled by surface chelation with reduced ^99mTc. Parameters affecting the radiolabeling efficiency such as concentration of stannous chloride (SnCl₂·H₂O), pH, and incubation time were evaluated. In vitro stability of radiolabeled niosomes was studied in 0.9% saline and human serum at 37°C for up to 8 hours.

Results

Niosomes had an average particle size of 110.2±0.7 nm, polydispersity index of 0.229±0.008, and zeta potential of −64.8±1.2 mV. Experimental data revealed that 30 µg/mL of SnCl₂·H₂O was the optimal concentration of reducing agent required for the radiolabeling process. The pH and incubation time required to obtain high radiolabeling efficiency was pH 5 and 15 minutes, respectively. ^99mTc-labeled niosomes exhibited high radiolabeling efficiency (>90%) and showed good in vitro stability for up to 8 hours.

Conclusion

To our knowledge, this is the first study published on the surface chelation of niosomes with ^99mTc. The formulated ^99mTc-labeled niosomes possessed high radiolabeling efficacy, good stability in vitro, and show good promise for potential use in nuclear imaging in the future.

Real-Time Monitoring of Interactions between Solid-Supported Lipid Vesicle Layers and Short- and Medium-Chain Length Alcohols: Ethanol and 1-Pentanol

Lipid bilayers represent the interface between the cell and its environment, serving as model systems for the study of various biological processes. For instance, the addition of small molecules such as alcohols is a well-known process that modulates lipid bilayer properties, being considered as a reference for general anesthetic molecules. A plethora of experimental and simulation studies have focused on alcohol’s effect on lipid bilayers. Nevertheless, most studies have focused on lipid membranes formed in the presence of alcohols, while the effect of n-alcohols on preformed lipid membranes has received much less research interest. Here, we monitor the real-time interaction of short-chain alcohols with solid-supported vesicles of dipalmitoylphosphatidylcholine (DPPC) using quartz crystal microbalance with dissipation monitoring (QCM-D) as a label-free method. Results indicate that the addition of ethanol at different concentrations induces changes in the bilayer organization but preserves the stability of the supported vesicle layer. In turn, the addition of 1-pentanol induces not only changes in the bilayer organization, but also promotes vesicle rupture and inhomogeneous lipid layers at very high concentrations.

A Promising Biocompatible Platform: Lipid-Based and Bio-Inspired Smart Drug Delivery Systems for Cancer Therapy

Designing new drug delivery systems (DDSs) for safer cancer therapy during pre-clinical and clinical applications still constitutes a considerable challenge, despite advances made in related fields. Lipid-based drug delivery systems (LBDDSs) have emerged as biocompatible candidates that overcome many biological obstacles. In particular, a combination of the merits of lipid carriers and functional polymers has maximized drug delivery efficiency. Functionalization of LBDDSs enables the accumulation of anti-cancer drugs at target destinations, which means they are more effective at controlled drug release in tumor microenvironments (TMEs). This review highlights the various types of ligands used to achieve tumor-specific delivery and discusses the strategies used to achieve the effective release of drugs in TMEs and not into healthy tissues. Moreover, innovative recent designs of LBDDSs are also described. These smart systems offer great potential for more advanced cancer therapies that address the challenges posed in this research area.

Exploring Molecular-Biomembrane Interactions with Surface Plasmon Resonance and Dual Polarization Interferometry Technology: Expanding the Spotlight onto Biomembrane Structure

The molecular analysis of biomolecular-membrane interactions is central to understanding most cellular systems but has emerged as a complex technical challenge given the complexities of membrane structure and composition across all living cells. We present a review of the application of surface plasmon resonance and dual polarization interferometry-based biosensors to the study of biomembrane-based systems using both planar mono- or bilayers or liposomes. We first describe the optical principals and instrumentation of surface plasmon resonance, including both linear and extraordinary transmission modes and dual polarization interferometry. We then describe the wide range of model membrane systems that have been developed for deposition on the chips surfaces that include planar, polymer cushioned, tethered bilayers, and liposomes. This is followed by a description of the different chemical immobilization or physisorption techniques. The application of this broad range of engineered membrane surfaces to biomolecular-membrane interactions is then overviewed and how the information obtained using these techniques enhance our molecular understanding of membrane-mediated peptide and protein function. We first discuss experiments where SPR alone has been used to characterize membrane binding and describe how these studies yielded novel insight into the molecular events associated with membrane interactions and how they provided a significant impetus to more recent studies that focus on coincident membrane structure changes during binding of peptides and proteins. We then discuss the emerging limitations of not monitoring the effects on membrane structure and how SPR data can be combined with DPI to provide significant new information on how a membrane responds to the binding of peptides and proteins.

Nanomaterial Preparation by Extrusion through Nanoporous Membranes

Template synthesis represents an important class of nanofabrication methods. Herein, recent advances in nanomaterial preparation by extrusion through nanoporous membranes that preserve the template membrane without sacrificing it, which is termed as "non-sacrificing template synthesis," are reviewed. First, the types of nanoporous membranes used in nanoporous membrane extrusion applications are introduced. Next, four common nanoporous membrane extrusion strategies: vesicle extrusion, membrane emulsification, precipitation extrusion, and biological membrane extrusion, are examined. These methods have been utilized to prepare a wide range of nanomaterials, including liposomes, emulsions, nanoparticles, nanofibers, and nanotubes. The principle and historical context of each specific technology are discussed, presenting prominent examples and evaluating their positive and negative features. Finally, the current challenges and future opportunities of nanoporous membrane extrusion methods are discussed.

Aescin Incorporation and Nanodomain Formation in DMPC Model Membranes

The saponin aescin from the horse chestnut tree is a natural surfactant well-known to self-assemble as oriented-aggregates at fluid interfaces. Using model membranes in the form of lipid vesicles and Langmuir monolayers, we study the mixing properties of aescin with the phase-segregating phospholipid 1,2-dimyristoyl-sn-glycero-phosphocholine (DMPC). The binary membranes are experimentally studied on different length scales ranging from the lipid headgroup area to the macroscopic scale using small-angle X-ray scattering (SAXS), photon correlation spectroscopy (PCS), and differential scanning calorimetry (DSC) with binary bilayer vesicles and Langmuir tensiometry (LT) with lipid monolayers spread on the surface of aescin solutions. The binary interaction was found to strongly depend on aescin concentration in two well differentiated concentration regimes. Below 7 mol %, the results reveal phase segregation of nanometer-sized aescin-rich domains in an aescin-poor continuous bilayer. Above this concentration, aescin-aescin interactions dominate, which inhibit vesicle formation but lead to the formation of new membrane aggregates of smaller sizes. From LT studies in monolayers, the interaction of aescin with DMPC was shown to be stronger in the condensed phase than in the liquid expanded phase. Furthermore, a destructuring role was revealed for aescin on phospholipid membranes, similar to the fluidizing effect of cholesterol and nonsteroidal anti-inflammatory drugs (NSAIDs) on lipid bilayers.

Design, optimization and characterization of coenzyme Q10- and D-panthenyl triacetate-loaded liposomes

Coenzyme Q10 (CoQ10) is a lipid-soluble molecule found naturally in many eukaryotic cells and is essential for electron transport chain and energy generation in mitochondria. D-Panthenyl triacetate (PTA) is an oil-soluble derivative of D-panthenol, which is essential for coenzyme A synthesis in the epithelium. Liposomal formulations that encapsulate both ingredients were prepared and optimized by applying response surface methodology for increased stability and skin penetration. The optimum formulation comprised 4.17 mg CoQ10, 4.22 mg PTA and 13.95 mg cholesterol per 100 mg of soy phosphatidylcholine. The encapsulation efficiency of the optimized formulation for CoQ10 and PTA was found to be 90.89%±3.61% and 87.84%±4.61%, respectively. Narrow size distribution was achieved with an average size of 161.6±3.6 nm, while a spherical and uniform shape was confirmed via scanning electron microscopy and transmission electron microscopy images. Cumulative release of 90.93% for PTA and 24.41% for CoQ10 was achieved after 24 hours of in vitro release study in sink conditions. Physical stability tests indicated that the optimized liposomes were suitable for storage at 4°C for at least 60 days. The results suggest that the optimized liposomal formulation would be a promising delivery system for both ingredients in various topical applications.

Molecular Dynamics Simulation of Trimer Self-Assembly Under Shear

The self-assembly of patchy trimer particles consisting of one attractive site and two repulsive sites is investigated with nonequilibrium molecular dynamics simulations in the presence of a velocity gradient, as would be produced by the application of a shear stress on the system. As shear is increased, globular-shaped micellar clusters increase in size and become more elongated. The globular clusters are also more stable at higher temperatures in the presence of shear than at equilibrium. These results help to increase our understanding of the effect of shear on self-assembly for a variety of applications.

Formulation and stabilization of norfloxacin in liposomal preparations

A number of liposomal preparations of norfloxacin (NF) containing variable concentrations of phosphatidylcholine (PC) (10.8-16.2mM) have been formulated and an entrapment of NF to the extent of 41.7-56.2% was achieved. The values of apparent first-order rate constants (kobs) for the photodegradation of NF in liposomes (pH7.4) lie in the range of 1.05-2.40×10(-3)min(-1) compared to a value of 8.13×10(-3)min(-1) for the photodegradation of NF in aqueous solution (pH7.4). The values of kobs are a linear function of PC concentration indicating an interaction of PC and NF during the reaction. The second-order rate constant for the photochemical interaction of PC and NF has been determined as 8.92×10(-2)M(-1)min(-1). Fluorescence measurements on NF in liposomes indicate a decrease in fluorescence with an increase in PC concentration as a result of formation of NF(-) species which exhibits poor fluorescence. Dynamic light scattering has shown an increase in the size of NF encapsulated liposomes with an increase in PC concentration. The stabilization of NF in liposomes is achieved by the formation of a charge-transfer complex between NF and PC.