Electrospun Polymer Nanofibers Reinforced by Tannic Acid/Fe+++ Complexes

Modification of Hydrotalcite Loading Tannic Acid with Organic Silane and Application in Anticorrosive Epoxy Coating

Metal corrosion is a challenge for the world with heavy impacts on the economy. Study on the development of effectiveness anticorrosion additives is a promising strategery for the protection industry. This research focuses on the modification of hydrotalcite Mg-Al (HT) loading tannic acid (TA) with 3-(trimethoxy silyl) propyl methacrylate organo-silane (TMSPM) for applicating as an anti-corrosion additive for epoxy coating on the steel substrate. The suitable ratio of HT and modifiers was investigated and the suitable content of modified HT in epoxy matrix was found based on mechanical properties of the epoxy-based coating. The characteristics of modified HT were assessed through infrared (IR) spectroscopy, X-ray diffraction pattern (XRD), scanning electron microscopy (SEM), thermal gravimetry analysis (TGA), water contact angle (WCA), dynamic light scattering (DLS). Detailly, HT-TA3-S3 shows good stability in distilled water when HT/TA was modified with TMSPM which makes Zeta potential decreases significantly. Besides, SEM analysis presented HT-TA-S has a cylindrical shape about of 500 nm. Moreover, the crystallite size of HT/TA after being modified by TMSPM decreases sharply. All of these prove successfully synthesize HT loading TA with modified TMSPM. Water contact angle (WCA) decreases in case of loading TA and increases in case of modifying with TMSPM (WCA changed from HT (116.3°) to HT-TA (102.4°) and HT-TA-S (120.1°) which indicates the increased hydrophobicity of the sample. The obtained results showed HT/TA was modified successfully with TMSPM. The modification affected the size distribution and surface properties of HT nanoparticles while it did not impact on the crystal structure of HT. After incorporating modified HT/TA into the epoxy coating, the adhesion of coating to steel substrate was improved significantly. Consequently, the adhesion of epoxy/3 wt. % modified HT/TA coating was increased 3 times as compared to epoxy neat (from 0.76 MPa to 2.77 MPa). In addition, the relative hardness and gloss retention of epoxy/3 wt. % modified HT/TA coating reached the maximum values as compared to the others. Owing to salt spraying results, the epoxy/3 wt. % modified HT/TA exhibited an excellent anticorrosion ability for the steel substrate. All the above results show the potential of HT nanoparticles loading TA modified with TMSPM as anticorrosive additives for protective coatings on steel substrates.

Encapsulation of tannic acid in polyvinylidene fluoride mediated electrospun nanofibers and its antibiofilm and antibacterial activities

In the past 15 years or more, interest in polymer-mediated nanofibers (NFs), a significant class of nanomaterials, has grown. Although fibers with a diameter of less than 1 mm are frequently commonly referred to as NFs, and are typically defined as having a diameter of less than several hundreds of nanometers. Due to the increased antibiotic resistance of many diseases nowadays, NFs with antibacterial activity are quite important. A flexible technique for creating NFs with the desired characteristics is called electrospinning. This research article describes how to make electrospun NFs of tannic acid (TA) with polyvinylidene fluoride (PVDF) as the template. As a result, the absorbance of the obtained NFs has been raised without forming any additional peaks in the spectral ranges. The obtained NF has a gradual increase in intensity, and the FT-IR data show that the TA is present in the NFs. FE-SEM images show that the NFs are discovered to be completely bead-free. Since TA reduced the viscosity of the spinning solution while marginally increasing solution conductivity, PVDF NFs have a greater average fiber diameter (AFD) than NFs of TA with PVDF, which is likely a result of the TA solutions in it. The findings showed that TA greatly decreased S. aureus and E. coli's ability to attach. The acquired NFs created in this work may have significant potential for reducing the pathogenicity of S. aureus and E. coli as well as their ability to build biofilms.

Expanding the Repertoire of Electrospinning: New and Emerging Biopolymers, Techniques, and Applications

Electrospinning has emerged as a versatile and accessible technology for fabricating polymer fibers, particularly for biological applications. Natural polymers or biopolymers (including synthetically derivatized natural polymers) represent a promising alternative to synthetic polymers, as materials for electrospinning. Many biopolymers are obtained from abundant renewable sources, are biodegradable, and possess inherent biological functions. This review surveys recent literature reporting new fibers produced from emerging biopolymers, highlighting recent developments in the use of sulfated polymers (including carrageenans and glycosaminoglycans), tannin derivatives (condensed and hydrolyzed tannins, tannic acid), modified collagen, and extracellular matrix extracts. The proposed advantages of these biopolymer-based fibers, focusing on their biomedical applications, are also discussed to highlight the use of new and emerging biopolymers (or new modifications to well-established ones) to enhance or achieve new properties for electrospun fiber materials.

Biodegradable engineered fiber scaffolds fabricated by electrospinning for periodontal tissue regeneration

Considering the specificity of periodontium and the unique advantages of electrospinning, this technology has been used to fabricate biodegradable tissue engineering materials for functional periodontal regeneration. For better biomedical quality, a continuous technological progress of electrospinning has been performed. Based on property of materials (natural, synthetic or composites) and additive novel methods (drug loading, surface modification, structure adjustment or 3 D technique), various novel membranes and scaffolds that could not only relief inflammation but also influence the biological behaviors of cells have been fabricated to achieve more effective periodontal regeneration. This review provides an overview of the usage of electrospinning materials in treatments of periodontitis, in order to get to know the existing research situation and find treatment breakthroughs of the periodontal diseases.

Hydrogen-Bonded, Mechanically Strong Nanofibers with Tunable Antioxidant Activity

We report on mechanically strong, water-insoluble hydrogen-bonded nanofiber mats composed of a hydrophilic polymer and a natural polyphenol that exhibit prolonged antioxidant activity. The high performance of fibrous mats resulted from the formation of a network of hydrogen bonds between a low-molecular-weight polyphenol (tannic acid, TA) and a water-soluble polymer (polyvinylpyrrolidone, PVP) and could be precisely controlled by the TA-to-PVP ratio. Dramatic enhancement (5- to 10-fold) in tensile strength, toughness, and Young's moduli of the PVP/TA fiber mats (as compared to those of pristine PVP fibers) was achieved at the maximum density of hydrogen bonds, which occurred at ∼0.2-0.4 molar fractions of TA. The formation of hydrogen bonds was confirmed by an increase in the glass-transition temperature of the polymer after binding with TA. When exposed to water, the fibers exhibited composition- and pH-dependent stabilities, with the TA-enriched fibers fully preserving their integrity in acidic and neutral media. Importantly, the fiber mats exhibited strong antioxidant activity with dual (burst and prolonged) activity profiles, which could be controlled via fiber composition, a feature useful for controlling radical-scavenging rates in environmental and biological applications.

Applications of Electrospun Nanofibers with Antioxidant Properties: A Review

Antioxidants can be encapsulated to enhance their solubility or bioavailability or to protect them from external factors. Electrospinning has proven to be an excellent option for applications in nanotechnology, as electrospun nanofibers can provide the necessary environment for antioxidant encapsulation. Forty-nine papers related to antioxidants loaded onto electrospun nanofibers were categorized and reviewed to identify applications and new trends. Medical and food fields were commonly proposed for the newly obtained composites. Among the polymers used as a matrix for the electrospinning process, synthetic poly (lactic acid) and polycaprolactone were the most widely used. In addition, natural compounds and extracts were identified as antioxidants that help to inhibit free radical and oxidative damage in tissues and foods. The most recurrent active compounds used were tannic acid (polyphenol), quercetin (flavonoid), curcumin (polyphenol), and vitamin B6 (pyridoxine). The incorporation of active compounds in nanofibers often improves their bioavailability, giving them increased stability, changing the mechanical properties of polymers, enhancing nanofiber biocompatibility, and offering novel properties for the required field. Although most of the polymers used were synthetic, natural polymers such as silk fibroin, chitosan, cellulose, pullulan, polyhydroxybutyrate, and zein have proven to be proper matrices for this purpose.

Metal Ion-Chelated Tannic Acid Coating for Hemostatic Dressing

Tannic acid (TA), a high-molecular-weight polyphenol, is used as a hemostasis spray and unguent for trauma wound remedy in traditional medical treatment. However, the use of tannic acid on a large-area wound would lead to absorption poisoning. In this work, a TA coating was assembled on a quartz/silicon slide, or medical gauze, via chelation interaction between TA and Fe3+ ions and for further use as a hemostasis dressing. Protein adsorption on the TA coating was further investigated by fluorescence signal, ellipsometry analysis and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). The adsorbed bovine serum albumin (BSA), immunoglobulin G (IgG) and fibrinogen (Fgn) on the TA coating was in the manner of monolayer saturation adsorption, and fibrinogen showed the largest adsorption. Furthermore, we found the slight hemolysis of the TA coating caused by the lysed red blood cells and adsorption of protein, especially the clotting-related fibrinogen, resulted in excellent hemostasis performance of the TA coating in the blood clotting of an animal wound. Thus, this economic, environmentally friendly, flexible TA coating has potential in medical applications as a means of preparing novel hemostasis materials.

Incorporation of Tannic Acid in Food-Grade Guar Gum Fibrous Mats by Electrospinning Technique

The use of polysaccharides to produce functional micro- or nanoscale fibrous mats has attracted growing interest for their food-grade applications. In this study, the characterization and electro-spinnability of guar gum (GG) solutions loaded with tannic acid (TA) was demonstrated. Food-grade antioxidant materials were successfully produced by electrospinning while incorporating different loads of TA into GG fibers. Bead-free GG-TA fibers could be fabricated from GG solution (2 wt %) with 10 wt % TA. Increasing the amount of TA led to fibers with defects and larger diameter sizes. Fourier Transformed Infrared Spectroscopy and X-ray Diffraction of neat GG and TA loaded GG fibrous mats suggested that inclusion of TA interrupted the hydrogen bonding and that a higher density of the ordered junction zones formed with the increased TA. The high TA incorporation efficiency and retained antioxidant activity of the fibrous mats afford a potential application in active edible film or drug delivery system.

Polymer-free electrospinning of tannic acid and cross-linking in water for hybrid supramolecular nanofibres

Electrospinning is the process of choice allowing the preparation of nanofibrous materials from a solution usually based on a high molar mass polymer. The solution must bring enough chain entanglements to avoid any breaking or Rayleigh instability of the electrospun jet resulting thus in the deposition of a continuous and regular solid nanofibre. It has been however shown that some few non-polymeric molecules can be electrospun without using a carrier polymer. We demonstrate here the case of tannic acid. Indeed, it was possible to electrospin this molecule solubilised in a mixture of water and ethanol as well as in pure water. Rheology, dynamic light scattering and cryo-TEM highlight the formation of tannic acid aggregates in solution. Above a critical concentration, these aggregates form a supramolecular interconnected network strong enough to allow the electrospinning of a continuous and regular nanofibre. The resulting nanoweb is mechanically stable and can be handled and wrapped. Furthermore, as opposed to the other small molecules for which polymer-free electrospinning was also demonstrated, tannic acid nanowebs can be efficiently cross-linked in water either by oxidative reaction with sodium periodate or, most interestingly, with FeIII by a combination of oxidative reaction and the formation of coordination complexes. The proposed electrospinning and cross-linking strategy is easy, of low cost, and scalable and uses non-toxic solvents as well as biocompatible and biofunctional molecules. Furthermore, thanks to the chelation capacity of tannic acid having the ability to coordinate with a wide variety of metals, hybrid smart nanowebs can be envisaged for diverse applications such as biomedical, catalysis as well as environment.

Electrospun Ceramic Nanofiber Mats Today: Synthesis, Properties, and Applications

Ceramic nanofibers (NFs) have recently been developed for advanced applications due to their unique properties. In this article, we review developments in electrospun ceramic NFs with regard to their fabrication process, properties, and applications. We find that surface activity of electrospun ceramic NFs is improved by post pyrolysis, hydrothermal, and carbothermal processes. Also, when combined with another surface modification methods, electrospun ceramic NFs result in the advancement of properties and widening of the application domains. With the decrease in diameter and length of a fiber, many properties of fibrous materials are modified; characteristics of such ceramic NFs are different from their wide and long (bulk) counterparts. In this article, electrospun ceramic NFs are reviewed with an emphasis on their applications as catalysts, membranes, sensors, biomaterials, fuel cells, batteries, supercapacitors, energy harvesting systems, electric and magnetic parts, conductive wires, and wearable electronic textiles. Furthermore, properties of ceramic nanofibers, which enable the above applications, and techniques to characterize them are briefly outlined.