Chitosan-Based Composite Materials for Prospective Hemostatic Applications

Antibacterial adhesive based on oxidized tannic acid-chitosan for rapid hemostasis

Currently, bacterial infections and bleeding interfere with wound healing, and multifunctional hydrogels with appropriate blood homeostasis, skin adhesion, and antibacterial activity are desirable. In this study, chitosan-based hydrogels were synthesized using oxidized tannic acid (OTA) and Fe3+ as cross-linkers (CS-OTA-Fe) by forming covalent, non-covalent, and metal coordination bonds between Fe3+ and OTA. Our results demonstrated that CS-OTA-Fe hydrogels showed antibacterial properties against Gram-positive bacteria (Staphylococcus aureus)and Gram-negative bacteria (Escherichia coli), low hemolysis rate (< 2 %), rapid blood clotting ability, in vitro (< 2 min), and in vivo (90 s) in mouse liver bleeding. Additionally, increasing the chitosan concentration from 3 wt% to 4.5 wt% enhanced cross-linking in the network, leading to a significant improvement in the strength (from 106 ± 8 kPa to 168 ± 12 kPa) and compressive modulus (from 50 ± 9 kPa to 102 ± 14 kPa) of hydrogels. Moreover, CS-OTA-Fe hydrogels revealed significant adhesive strength (87 ± 8 kPa) to the cow's skin tissue and cytocompatibility against L929 fibroblasts. Overall, multifunctional CS-OTA-Fe hydrogels with tunable mechanical properties, excellent tissue adhesive, self-healing ability, good cytocompatibility, and fast hemostasis and antibacterial properties could be promising candidates for biomedical applications.

Recent advancements in natural polymers-based self-healing nano-materials for wound dressing

The field of wound healing has witnessed remarkable progress in recent years, driven by the pursuit of advanced wound dressings. Traditional dressing materials have limitations like poor biocompatibility, nonbiodegradability, inadequate moisture management, poor breathability, lack of inherent therapeutic properties, and environmental impacts. There is a compelling demand for innovative solutions to transcend the constraints of conventional dressing materials for optimal wound care. In this extensive review, the therapeutic potential of natural polymers as the foundation for the development of self-healing nano-materials, specifically for wound dressing applications, has been elucidated. Natural polymers offer a multitude of advantages, possessing exceptional biocompatibility, biodegradability, and bioactivity. The intricate engineering strategies employed to fabricate these polymers into nanostructures, thereby imparting enhanced mechanical robustness, flexibility, critical for efficacious wound management has been expounded. By harnessing the inherent properties of natural polymers, including chitosan, alginate, collagen, hyaluronic acid, and so on, and integrating the concept of self-healing materials, a comprehensive overview of the cutting-edge research in this emerging field is presented in the review. Furthermore, the inherent self-healing attributes of these materials, wherein they exhibit innate capabilities to autonomously rectify any damage or disruption upon exposure to moisture or body fluids, reducing frequent dressing replacements have also been explored. This review consolidates the existing knowledge landscape, accentuating the benefits and challenges associated with these pioneering materials while concurrently paving the way for future investigations and translational applications in the realm of wound healing.

Insights into the molecular mechanisms, structure-activity relationships and application prospects of polysaccharides by regulating Nrf2-mediated antioxidant response

The occurrence and development of many diseases are closely related to oxidative stress. In this context, accumulating evidence suggests that Nrf2, as the master switch of cellular antioxidant signaling, plays a central role in controlling the expression of antioxidant genes. The core molecular mechanism of polysaccharides treatment of oxidative stress-induced diseases is to activate Keap1/Nrf2/ARE signaling pathway, promote nuclear translocation of Nrf2, and up-regulate the expression of antioxidant enzymes. However, recent studies have shown that other signaling pathways in which polysaccharides exert antioxidant effects, such as PI3K/Akt/GSK3β, JNK/Nrf2 and NF-κB, have complex crosstalk with Keap1/Nrf2/ARE, may have direct effects on the nuclear translocation of Nrf2. This suggests a new strategy for designing polysaccharides as modulators of Nrf2-dependent pathways to target the antioxidant response. Therefore, in this work, we investigate the crosstalk between Keap1/Nrf2/ARE and other antioxidant signaling pathways of polysaccharides by regulating Nrf2-mediated antioxidant response. For the first time, the structural-activity relationship of polysaccharides, including molecular weight, monosaccharide composition, and glycosidic linkage, is systematically elucidated using principal component analysis and cluster analysis. This review also summarizes the application of antioxidant polysaccharides in food, animal production, cosmetics and biomaterials. The paper has significant reference value for screening antioxidant polysaccharides targeting Nrf2.

Expansion-clotting chitosan fabrics based on unidirectional fast-absorption fibers for rapid hemorrhage control

The rapid absorption of water from the blood to concentrate erythrocytes and platelets, thus triggering quick closure, is important for hemostasis. Herein, expansion-clotting chitosan fabrics are designed and fabricated by ring spinning of polylactic acid (PLA) filaments as the core layer and highly hydrophilic carboxyethyl chitosan (CECS) fibers as the sheath layer, and subsequent knitting of obtained PLA@CECS core spun yarns. Due to the unidirectional fast-absorption capacity of CECS fibers, the chitosan fabrics can achieve erythrocytes and platelets aggregate quickly by concentrating blood, thus promoting the formation of blood clots. Furthermore, the loop structure of coils formed in the knitted fabric can help them to expand by absorbing water to close their pores, providing effective sealing for bleeding. Besides, They have enough mechanical properties, anti-penetrating ability, and good tissue-adhesion ability in wet conditions, which can form a physical barrier to resist blood pressure during hemostasis and prevent them from falling off the wound, thus enhancing hemostasis synergistically. Therefore, the fabrics exhibit superior hemostatic performance in the rabbit liver, spleen, and femoral artery puncture injury model compared to the gauze group. This chitosan fabric is a promising hemostatic material for hemorrhage control.

A 3D-Printed Cuttlefish Bone Elastomeric Sponge Rapidly Controlling Noncompressible Hemorrhage

Developing a self-expanding hemostatic sponge with high blood absorption and rapid shape recovery for noncompressible hemorrhage remains a challenge. In this study, a 3D-printed cuttlefish bone elastomeric sponge (CBES) is fabricated, which combined ordered channels and porous structures, presented tunable mechanical strength, and shape memory potentials. The incorporation of cuttlefish bone powder (CBp) plays key roles in concentrating blood components, promoting aggregation of red blood cells and platelets, and activating platelets, which makes CBES show enhanced hemostatic performance compared with commercial gelatin sponges in vivo. Moreover, CBES promotes more histiocytic infiltration and neovascularization in the early stage of degradation than gelatin sponges, which is conducive to the regeneration and repair of injured tissue. To conclude, CBp loaded 3D-printed elastomeric sponges can promote coagulation, present the potential to guide tissue healing, and broaden the hemostatic application of traditional Chinese medicine.

Chitosan-based materials for dental implantology: A comprehensive review

Chitosan, a versatile biopolymer, has gained recognition in the discipline of dental implantology due to possessing salient properties. This comprehensive review explores the potential of chitosan in dental implants, focusing on its biocompatibility, bioactivity, and the various chitosan-based materials that have been utilized for dental implant therapy. The review also highlights the importance of surface treatment in dental implants to enhance osseointegration and inhibit bacterial biofilm formation. Additionally, the chemical structure, properties, and sources of chitosan are described, along with its different structural forms. The characteristics of chitosan particularly color, molecular weight, viscosity, and degree of deacetylation are discussed about their influence on its applications. This review provides valuable insights into the promising utilization of polymeric chitosan in enhancing the success and functionality of dental implants. This study highlights the potential applications of chitosan in oral implantology. Chitosan possesses various advantageous properties, including muco-adhesiveness, hemostatic action, biocompatibility, biodegradability, bioactivity, and antibacterial and antifungal activities, which enhance its uses in dental implantology. However, it has limited aqueous solubility at the physiological pH, which sometimes restricts its biological application, but this problem can be overcome by using modified chitosan or chitosan derivatives, which have also shown encouraging results. Recent research suggests that chitosan may act as a promising material for coating titanium-based implants, improving osteointegration together with antibacterial properties.

The study of double-network carboxymethyl chitosan/sodium alginate based cryogels for rapid hemostasis in noncompressible hemorrhage

Developing an injectable hemostatic dressing with shape recovery and high blood absorption ratio for rapid hemostasis in noncompressible hemorrhage maintains a critical clinical challenge. Here, double-network cryogels based on carboxymethyl chitosan, sodium alginate, and methacrylated sodium alginate were prepared by covalent crosslinking and physical crosslinking, and named carboxymethyl chitosan/methacrylated sodium alginate (CM) cryogels. Covalent crosslinking was achieved by methacrylated sodium alginate in the freeze casting process, while physical crosslinking was realized by electrostatic interaction between the amino group of carboxymethyl chitosan and the carboxyl group of sodium alginate. CM cryogels exhibited large water swelling ratios (8167 ± 1062 %), fast blood absorption speed (2974 ± 669 % in 15 s), excellent compressive strength (over 160 kPa for CM100) and shape recovery performance. Compared with gauze and commercial gelatin sponge, better hemostatic capacities were demonstrated for CM cryogel with the minimum blood loss of 40.0 ± 8.9 mg and the lowest hemostasis time of 5.0 ± 2.0 s at hemostasis of rat liver. Made of natural polysaccharides with biocompatibility, hemocompatibility, and cytocompatibility, the CM cryogels exhibit shape recovery and high blood absorption rate, making them promising to be used as an injectable hemostatic dressing for rapid hemostasis in noncompressible hemorrhage.

Advancements in application of chitosan and cyclodextrins in biomedicine and pharmaceutics: recent progress and future trends

The global community is faced with numerous health concerns such as cancer, cardiovascular and neurological diseases, diabetes, joint pain, osteoporosis, among others. With the advancement of research in the fields of materials chemistry and medicine, pharmaceutical technology and biomedical analysis have entered a new stage of development. The utilization of natural oligosaccharides and polysaccharides in pharmaceutical/biomedical studies has gained significant attention. Over the past decade, several studies have shown that chitosan and cyclodextrin have promising biomedical implications in background analysis, ongoing development, and critical applications in biomedical and pharmaceutical research fields. This review introduces different types of saccharides/natural biopolymers such as chitosan and cyclodextrin and discusses their wide-ranging applications in the biomedical/pharmaceutical research area. Recent research advances in pharmaceutics and drug delivery based on cyclodextrin, and their response to smart stimuli, as well as the biological functions of cyclodextrin and chitosan, such as the immunomodulatory effects, antioxidant, and antibacterial properties, have also been discussed, along with their applications in tissue engineering, wound dressing, and drug delivery systems. Finally, the innovative applications of chitosan and cyclodextrin in the pharmaceutical/biomedicine were reviewed, and current challenges, research/technological gaps, and future development opportunities were surveyed.

Recent advances of chitosan as a hemostatic material: Hemostatic mechanism, material design and prospective application

Uncontrolled hemorrhage arising from surgery or trauma may cause morbidity and even mortality. Therefore, facilitating control of severe bleeding is imperative for health care worldwide. Among diverse hemostatic materials, chitosan (CS) is becoming the most promising material owing to its non-toxic feature, as well as inherently hemostatic performance. However, further enhancing hemostatic property of CS-based materials without compromising more beneficial functions remains a challenge. In this review, representative hemostatic mechanisms of CS-based materials are firstly discussed in detail, mostly including red blood cells (RBCs) aggregation, platelet adherence and aggregation, as well as interaction with plasma proteins. Also, various forms (involving powder/particle, sponge, hydrogel, nanofiber, and other forms) of CS-based hemostatic materials are systematically summarized, mainly focusing on their design and preparation, characteristics, and comparative analysis of various forms. In addition, varied hemostatic applications are described in detail, such as skin wound hemostasis, liver hemostasis, artery hemostasis, and heart hemostasis. Finally, current challenges and future directions of functional design of CS-based hemostatic materials in diverse hemostatic applications are proposed to inspire more intensive researches.

Self-Oxidated Hydrophilic Chitosan Fibrous Mats for Fatal Hemorrhage Control

Enriching erythrocytes and platelets in seconds and providing a fast seal in bleeding sites is vital to fatal hemorrhage control. Herein, hydrophilic chitosan fibrous mats (CECS-D mats) are fabricated by introducing hydrophilic carboxyethyl groups and subsequent catechol groups onto chitosan fibers. Due to strong hydrophilicity, CECS-D mats exhibit rapid liquid-absorption capacity, especially instantaneous absorptivity to the rabbit blood, which can achieve erythrocyte and platelet aggregations quickly by concentrating blood, thus promoting the formation of blood clots. Furthermore, the mats are self-oxidated to form quinone-amine adducts or quinone multimers by adjusting pH conditions, which not only provides tissue adhesion but also induces erythrocyte aggregation and platelet adhesion, further enhancing the seal and triggering quick closure to achieve fast hemostasis. Therefore, the mats reveal superior hemostatic performance in rabbit liver and spleen models over CECS mats and gauze. Especially in the fatal femoral artery injury model of rabbits, the mats reduce the blood loss by ∼75% and shortened the bleeding time by ∼50% compared with CECS mats, which have been reported to have the same hemostatic effect as commercialized Celox products in a swine femoral artery injury model. Besides, the mats are cytocompatible and degradable as well as antibacterial. This chitosan mat is a promising hemostatic material for fatal hemorrhage control.

Functional hemostatic hydrogels: design based on procoagulant principles

Uncontrolled hemorrhage results in various complications and is currently the leading cause of death in the general population. Traditional hemostatic methods have drawbacks that may lead to ineffective hemostasis and even the risk of secondary injury. Therefore, there is an urgent need for more effective hemostatic techniques. Polymeric hemostatic materials, particularly hydrogels, are ideal due to their biocompatibility, flexibility, absorption, and versatility. Functional hemostatic hydrogels can enhance hemostasis by creating physical circumstances conducive to hemostasis or by directly interfering with the physiological processes of hemostasis. The procoagulant principles include increasing the concentration of localized hemostatic substances or establishing a physical barrier at the physical level and intervention in blood cells or the coagulation cascade at the physiological level. Moreover, synergistic hemostasis can combine these functions. However, some hydrogels are ineffective in promoting hemostasis or have a limited application scope. These defects have impeded the advancement of hemostatic hydrogels. To provide inspiration and resources for new designs, this review provides an overview of the procoagulant principles of hemostatic hydrogels. We also discuss the challenges in developing effective hemostatic hydrogels and provide viewpoints.

Preparation of healing-promoting and fibrosis-inhibiting asymmetric poly(ethylene glycol-b-L-phenylalanine)/cRGD-modified hyaluronate sponges and their applications in hemorrhage and nasal mucosa repair

Acute or chromic bleeding, such as epistaxis, requires hemostatic materials to assist hemostasis. Even in complex cases, hemostatic materials must have other functions, including the promotion of healing and prevention of adhesion. Herein, a series of fibrosis-suppressive functional cRGD-modified crosslinking hyaluronic acid sponges were prepared. The in vitro hemostatic efficiency and mechanism were determined using blood clotting time, blood coagulation index, lactate dehydrogenase (LDH) and thromboxane B2 (TX-B2) ELISA, and proteomics. Among the prepared sponges, both poly(ethylene-b-L-Phe) (PEBP)-and cRGD contained SPN4 and exhibited the highest platelet concentration and activation efficiency as well as the most effective coagulative effect. In addition, no significant cytotoxicity was observed for the sponges in rat airway epithelial cells. The in vivo hemostatic and adhesion-preventive effects of the sponges were evaluated using rat models of liver injury and sidewall defect-cecum abrasion. PEBP-containing sponges effectively prevented postoperative adhesion and cRGD-modified sponges exhibited excellent hemostatic effects. Finally, the comprehensive repair effects of the sponges were evaluated using a rabbit maxillary sinus mucosal injury model, based on CT, MRI examination, and pathological staining. SPN4 exhibited the best comprehensive reparative effects, including the promotion of mucosal repair and infection inhibition. Thus, SPN4 is a promising multifunctional hemostatic material.

Mesoporous Bioactive Glass-Graphene Oxide Composite Aerogel with Effective Hemostatic and Antibacterial Activities

Hemorrhage and infection after emergency trauma are two main factors that cause deaths. It is of great importance to instantly stop bleeding and proceed with antibacterial treatment for saving lives. However, there is still a huge need and challenge to develop materials with functions of both rapid hemostasis and effective antibacterial therapy. Herein, we propose the fabrication of a composite aerogel mainly consisting of mesoporous bioactive glass (MBG) and graphene oxide (GO) through freeze-drying. This composite aerogel has a three-dimensional porous structure, high absorption, good hydrophilicity, and negative zeta potential. Moreover, it exhibits satisfactory hemostatic activities including low BCI, good hemocompatibility, and activation of intrinsic pathways. When applied to rat liver injury bleeding, it can decrease 60% hemostasis time and 75% blood loss amount compared to medical gauze. On the other hand, the composite aerogel shows excellent photothermal antibacterial capacity against Staphylococcus aureus and Escherichia coli. Animal experiments further verify that this composite aerogel can effectively kill bacteria in wound sites via photothermal treatment and promote wound healing. Hence, this MBG-GO composite aerogel makes a great choice for the therapy of emergency trauma with massive hemorrhage and bacterial infection.

Antimicrobial and wound healing potential of naphthoquinones encapsulated in nanochitosan

Introduction: The use of chitosan in pharmaceutical formulations is an advantageous approach due to this compound intrinsic biodegradability and biocompatibility, as well as ready availability and low polymer cost. Methods: Herein, the naphthoquinones 3- chloromethylene-menadione (NQ1) and 2,3-dichloro-1,4-naphthoquinone (NQ2) were nanoencapsulated into chitosan (CNP) by the ionotropic gelatinization technique and characterized by DLS, FTIR, SEM, TGA and DSC, and their release profiles evaluated. The antimicrobial and wound healing activities were investigated. Results and Discussion: Homogeneous chitosan nanocapsulses of about 193 nm and Z potential ranging from +30.6 to +33.1 mV loaded with NQ1 (CNP-NQ1) or NQ2 (CNPQNQ2). With nanoencapsulation efficiencies of ≥ 96%, the solubility of naphthoquinones in aqueous environments was improved, making them suitable for biological system applications. The encapsulated naphthoquinones displayed a controlled release of approximately 80% for CNP-NQ1 and 90% for CNP-NQ2 over an 8 h period at 36°C. Both CNP-NQ1 and CNP-NQ2 retained the already established free naphthoquinone antimicrobial activity against two Staphylococcus aureus strains, Staphylococcus epidermidis, Streptococcus pyogenes and Pseudomonas aeruginosa. Although presenting low toxicity to healthy human cells, only CNP-NQ1 displayed therapeutic indices above 100 for S. aureus and S. epidermidis and above 27 for S. pyogenes and P. aeruginosa, allowing for safe use in human tissues. Furthermore, CNP-NQ1 did not impair the migration of human fibroblast cells in scratch assays, adding promising wound healing properties to this formulation. These findings emphasize that CNP-NQ1 may be useful in protecting injured skin tissue from bacterial contamination, avoiding skin infections not only by reducing bacterial loads but also by accelerating the healing process until complete dermal tissue recovery.

Tailored chitosan/glycerol micropatterned composite dressings by 3D printing for improved wound healing

Wound infection control is a primary clinical concern nowadays. Various innovative solutions have been developed to fabricate adaptable wound dressings with better control of infected wound healing. This work presents a facile approach by leveraging 3D printing to fabricate chitosan/glycerol into composite dressings with tailored micropatterns to improve wound healing. The bioinks of chitosan/glycerol were investigated as suitable for 3D printing. Then, three tailored micropatterns (i.e., sheet, strip, and mesh) with precise geometry control were 3D printed onto a commercial dressing to fabricate the micropatterned composite dressings. In vitro and in vivo studies indicate that these micropatterned dressings could speed up wound healing due to their increased water uptake capacity (up to ca. 16-fold@2 min), benign cytotoxicity (76.7 % to 90.4 % of cell viability), minor hemolytic activity (<1 %), faster blood coagulation effects (within 76.3 s), low blood coagulation index (14.5 % to 18.7 % @ 6 min), enhanced antibacterial properties (81.0 % to 86.1 % against S. aureus, 83.7 % to 96.5 % against E. coli), and effective inhibition of wound inflammation factors of IL-1β and TNF-α. Such tailored micropatterned composite dressing is facile to obtain, highly reproducible, and cost-efficient, making it a promising implication for improved and personalized contaminated wound healing.

Marine-derived polysaccharides and their therapeutic potential in wound healing application - A review

Polysaccharides originating from marine sources have been studied as potential material for use in wound dressings because of their desirable characteristics of biocompatibility, biodegradability, and low toxicity. Marine-derived polysaccharides used as wound dressing, provide several benefits such as promoting wound healing by providing a moist environment that facilitates cell migration and proliferation. They can also act as a barrier against external contaminants and provide a protective layer to prevent further damage to the wound. Research studies have shown that marine-derived polysaccharides can be used to develop different types of wound dressings such as hydrogels, films, and fibres. These dressings can be personalised to meet specific requirements based on the type and severity of the wound. For instance, hydrogels can be used for deep wounds to provide a moist environment, while films can be used for superficial wounds to provide a protective barrier. Additionally, these polysaccharides can be modified to improve their properties, such as enhancing their mechanical strength or increasing their ability to release bioactive molecules that can promote wound healing. Overall, marine-derived polysaccharides show great promise for developing effective and safe wound dressings for various wound types.

Development and evaluation of tilapia skin-derived gelatin, collagen, and acellular dermal matrix for potential use as hemostatic sponges

Hemostasis plays a critical role in the early stage of wound healing, especially in acute wounds which can significantly improve the survival of patients. Based on the excellent biocompatibility of natural biomaterials, in this study, we prepared a series of novel hemostatic sponges by using tilapia skin, a marine biological resource, and extracting tilapia skin-derived gelatin, collagen, and acellular dermal matrix through five different methods. Using in vitro sheep blood and in vivo rat liver hemorrhage models, we found that tilapia skin sponges had excellent coagulation and hemostatic abilities. Among them, the collagen sponge exhibited optimal hemostasis performance because it could accelerate clotting by binding to the specific sites of blood cells and platelets. Furthermore, the sponges' porous structure enhanced the capability to absorb blood, thus effectively promoting hemostasis. In summary, we reported an efficient and convenient method to prepare marine biological resources into sponges, which provided a novel class of alternatives for hemostasis in acute wounds with broad application prospects.

Chitosan-PEG Gels Loaded with Jatropha mollissima (Pohl) Baill. Ethanolic Extract: An Efficient and Effective Biomaterial in Hemorrhage Control

A lack of control over blood loss can have catastrophic implications, including death. Although several hemostatic medications have been employed to reduce bleeding, a vast majority of them are ineffective, expensive, or pose health risks to the patient. To overcome these constraints, chitosan-polyethylene glycol (CS-PEG) hemostatic gels loaded with ethanolic extract of Jatropha mollissima sap (EES) were prepared and their hemostatic, physicochemical, and cytotoxic properties were evaluated. The gels were produced by mixing CS with PEG (an external plasticizer) and EES. The phytochemical analysis revealed a significant concentration of total polyphenols and tannins content in the extract and catechin was identified as one of the key compounds of EES. Infrared spectroscopy analysis revealed the presence of EES in the gels, as well as the chemical interaction between CS and PEG. The gels were thermally stable between 25 and 37 °C (ambient and human body temperature range), had pseudoplastic deformation behavior (rheological properties preserved after shearing), were simple to inject (compression force 30 N), and were biocompatible. In vivo experiments showed that both CS-PEG-EES gels exhibited greater hemostatic action in preventing tail hemorrhage in Wistar rats, with decreased bleeding time and blood weight compared with unloaded CS-PEG gels (control groups) and Hemostank, a commercial product. However, the gel prepared with acetic acid was more efficient in controlling bleeding. These findings reveal that CS-PEG-EES gels can reduce hemorrhages and are a potent, simple, and safe hemostatic agent.

Sea Cucumber-Inspired Aerogel for Ultrafast Hemostasis of Open Fracture

The symptomatic management of hemorrhagic shock complicated by open fractures is a great challenge, because it is also complicated by complex wound bleeding, bacterial infection, and bone defects. Inspired by the water absorption and cross-sectional microstructure of sea cucumbers, in this study, a new sea cucumber-like aerogel (GCG) is proposed. Its aligned porous structure and composition can stop bleeding rapidly and effectively with a blood clotting index of 3.73 ± 1.8%. More importantly, the data of in vivo hemostasis test in an amputating rat tail hemostatic model (15.69 ± 2.45 s, 26.95 ± 8.43 mg) and liver puncture bleeding model (23.77 ± 2.68 s, 36.22 ± 16.92 mg) also indicate the excellent hemostatic performance of GCG. In addition, GCG also shows a significant inhibitory effect on S. aureus and E. coli, which can prevent the occurrence of postoperative osteomyelitis. Not only that, after filling in the bone defect, it is shown that this GCG aerogel completely degrades eight weeks after surgery and induces new bone ingrowth, achieving functional regeneration after hemostasis of an open fracture defect. Generally, because of its combination of hemostatic, antibacterial, and osteogenic activities, this new aerogel is a promising option for open fractures treatment.

Chitosan Hydrogels Crosslinked with Oxidized Sucrose for Antimicrobial Applications

Oxidized sucrose (OS) reacts with amino-group-containing polysaccharides, including chitosan, without catalyst, resulting in hydrogels entirely composed of carbohydrates. The presence of imine bonds with low structural stabilities and unreacted aldehydes in the structures of these hydrogels hinder their application as biomaterials. Therefore, herein, the chitosan hydrogels (CTSGs) obtained after the crosslinking of chitosan with OS were reduced using sodium borohydride to convert imine bonds to secondary amines and aldehydes to alcohols. The structures of CTSGs were comprehensively characterized using Fourier transform infrared and 13C nuclear magnetic resonance spectroscopies, and the results implied that the degree of crosslinking (CR) depended on the OS feed amount used during CTSG preparation. The properties of CTSGs were significantly dependent on CR; with an increase in CR, the thermal stabilities and dynamic moduli of CTSGs increased, whereas their swelling properties decreased. CTSGs exhibited antimicrobial properties against the gram-negative bacterium Escherichia coli, and their performances were also dependent on CR. The results indicated the potentials of CTSGs completely based on carbohydrates as antimicrobial hydrogels for various medical and pharmaceutical applications. We believe that this study will contribute to the development of hydrogels for application in the food, medical, and pharmaceutical fields.

An aminocaproic acid-grafted chitosan derivative with superior antibacterial and hemostatic properties for the prevention of secondary bleeding

Uncontrolled bleeding is one of the leading causes of human mortality. Existing hemostatic materials or techniques cannot meet the clinical requirements for safe and effective hemostasis. The development of novel hemostatic materials has always been of great interest. Chitosan hydrochloride (CSH), a derivative of chitin, is extensively used on wounds as an antibacterial and hemostatic agent. However, the formation of intra- or intermolecular hydrogen bonds between hydroxyl and amino groups limits its water solubility and dissolution rate and affects its effectiveness in promoting coagulation. Herein, we covalently grafted aminocaproic acid (AA) to the hydroxyl and amino groups of CSH via ester and amide bonds, respectively. The solubility of CSH in water (25 °C) was 11.39 ± 0.98 % (w/v), whereas the AA-grafted CSH (CSH-AA) reached 32.34 ± 1.23 % (w/v). Moreover, the dissolution rate of CSH-AA in water was 6.46 times higher than that of CSH. Subsequent studies proved that CSH-AA is non-toxic, biodegradable, and has superior antibacterial and hemostatic properties to CSH. Additionally, anti-plasmin activity can be exerted by the dissociated AA from the CSH-AA backbone, which can help to lessen secondary bleeding.

Hydrophilic chitosan/graphene oxide composite sponge for rapid hemostasis and non-rebleeding removal

Hydrophilic hemostatic sponge plays an important role in trauma bleeding control because of its robust coagulant functions. However, its strong tissue adhesion can easily result in wound tear and rebleeding during removing the sponge. Herein, the design of a hydrophilic anti-adhesive chitosan/graphene oxide composite sponge (CSAG) that possesses stable mechanical strength, rapid liquid absorption and strong intrinsic/extrinsic coagulation stimulations, is reported. For one thing, CSAG exhibits outstanding hemostatic performance, which significantly outperforms two commercial hemostats in two in vivo serious bleeding models. For another, CSAG shows low tissue adhesion; its peeling force is approximately 79.3 % lower than the commercial gauze. Moreover, in the peeling process, CSAG triggers partial detachment of the blood scab, because of the exist of bubbles or cavities at the interface, allowing the CSAG to be easily and safely peeled off from the wound without rebleeding. This study opens new avenues in constructing anti-adhesive trauma hemostatic materials.

Natural and Synthetic Polymeric Biomaterials for Application in Wound Management

Biomaterials are at the forefront of the future, finding a variety of applications in the biomedical field, especially in wound healing, thanks to their biocompatible and biodegradable properties. Wounds spontaneously try to heal through a series of interconnected processes involving several initiators and mediators such as cytokines, macrophages, and fibroblasts. The combination of biopolymers with wound healing properties may provide opportunities to synthesize matrices that stimulate and trigger target cell responses crucial to the healing process. This review outlines the optimal management and care required for wound treatment with a special focus on biopolymers, drug-delivery systems, and nanotechnologies used for enhanced wound healing applications. Researchers have utilized a range of techniques to produce wound dressings, leading to products with different characteristics. Each method comes with its unique strengths and limitations, which are important to consider. The future trajectory in wound dressing advancement should prioritize economical and eco-friendly methodologies, along with improving the efficacy of constituent materials. The aim of this work is to give researchers the possibility to evaluate the proper materials for wound dressing preparation and to better understand the optimal synthesis conditions as well as the most effective bioactive molecules to load.

Highly absorbent bio-sponge based on carboxymethyl chitosan/poly-γ-glutamic acid/platelet-rich plasma for hemostasis and wound healing

Stopping bleeding at an early stage and promoting wound healing are of great significance for efficient wound management. In this study, a carboxymethyl chitosan (CMCS)/poly-γ-glutamic acid (γ-PGA)/platelet-rich plasma (PRP) hydrogel (CP-PRP hydrogel) was firstly prepared by crosslinking of CMCS with γ-PGA and the enzymatic coagulation of PRP. Then, the CP-PRP hydrogel was freeze-dried and transformed into a sponge (CP-PRP sponge). A series of safety experiments with cells, blood, and tissues proved the biocompatibility of the CP-PRP sponge. Importantly, the CP-PRP sponge was able to adhere and condense red blood cells, which accelerated blood clotting. Therefore, the CP-PRP sponge showed an enhanced hemostasis effect compared to SURGIFLO® Hemostatic Matrix. Moreover, in vitro and in vivo experiments showed that the sponge was able to release epidermal growth factor (EGF) and vascular endothelial growth factor (VEGF). Thus, in a mouse model of full-thickness skin defects, the wounds of the sponge-treated mice were significantly healed within two weeks. These results proved the transforming potential of the CP-PRP sponge as a novel bioactive wound dressing.

UV cross-linked injectable non-swelling dihydrocaffeic acid grafted chitosan hydrogel for promoting wound healing

Hydrogels are widely used as wound dressings for wound healing, but when hydrogels absorb wound exudate, swelling occurs and compresses the surrounding tissue, affecting healing. A chitosan injectable (CS/4-PA/CAT) hydrogel based on catechol and 4-glutenoic acid was prepared to avoid swelling and promote wound healing. After cross-linking by UV light, pentenyl groups formed hydrophobic alkyl chains which give the hydrogel a hydrophobic network and thus control its swelling. CS/4-PA/CAT hydrogels retained their non-swelling for a long time in PBS solution at 37 °C. CS/4-PA/CAT hydrogels had good injectable and adhesive properties, and had a good killing effect on E. coli and S. aureus and could remove the bacterial biofilms of E. coli and S. aureus. CS/4-PA/CAT hydrogels had good in vitro coagulation function by absorbing red blood cells and platelets. When used in a whole skin injury model, CS/4-PA/CAT-1 hydrogel stimulated fibroblast migration, promoted epithelialization and accelerated collagen deposition to promote defect healing, and showed good hemostatic effects in liver and femoral artery defects in mice. In summary, the non-swelling injectable hydrogel with free radical scavenging, rapid hemostasis, and antibacterial effects would be a promising treatment for defect repair.

Chitosan-Based Biomaterials for Hemostatic Applications: A Review of Recent Advances

Hemorrhage is a detrimental event present in traumatic injury, surgery, and disorders of bleeding that can become life-threatening if not properly managed. Moreover, uncontrolled bleeding can complicate surgical interventions, altering the outcome of surgical procedures. Therefore, to reduce the risk of complications and decrease the risk of morbidity and mortality associated with hemorrhage, it is necessary to use an effective hemostatic agent that ensures the immediate control of bleeding. In recent years, there have been increasingly rapid advances in developing a novel generation of biomaterials with hemostatic properties. Nowadays, a wide array of topical hemostatic agents is available, including chitosan-based biomaterials that have shown outstanding properties such as antibacterial, antifungal, hemostatic, and analgesic activity in addition to their biocompatibility, biodegradability, and wound-healing effects. This review provides an analysis of chitosan-based hemostatic biomaterials and discusses the progress made in their performance, mechanism of action, efficacy, cost, and safety in recent years.

Flexible and Wearable Strain-Temperature Sensors Based on Chitosan/Ink Sponges

A simple and economic strategy to construct a chitosan-ink carbon nanoparticle sponge sensor was proposed by freeze-drying of chitosan and Chinese ink mixture solution. The microstructure and physical properties of the composite sponges with different ratios are characterized. The interfacial compatibility of chitosan and carbon nanoparticles in ink is satisfied, and the mechanical property and porosity of chitosan was increased by the incorporation of carbon nanoparticles. Due to excellent conductivity and good photothermal conversion effect of the carbon nanoparticles in ink, the constructed flexible sponge sensor has satisfactory strain and temperature sensing performance and high sensitivity (133.05 ms). In addition, these sensors can be successfully applied to monitor the large joint movement of the human body and the movement of muscle groups near the esophagus. Dual functionally integrated sponge sensors show great potential for strain and temperature detection in real time. The prepared chitosan-ink carbon nanoparticle composite shows promising applications in wearable smart sensors.

Recent advances in biomimetic hemostatic materials

Although the past decade has witnessed unprecedented medical advances, achieving rapid and effective hemostasis remains challenging. Uncontrolled bleeding and wound infections continue to plague healthcare providers, increasing the risk of death. Various types of hemostatic materials are nowadays used during clinical practice but have many limitations, including poor biocompatibility, toxicity and biodegradability. Recently, there has been a burgeoning interest in organisms that stick to objects or produce sticky substances. Indeed, applying biological adhesion properties to hemostatic materials remains an interesting approach. This paper reviews the biological behavior, bionics, and mechanisms related to hemostasis. Furthermore, this paper covers the benefits, challenges and prospects of biomimetic hemostatic materials.

Biopharmaceutical applications of microbial polysaccharides as materials: A review

Biological characteristics of natural polymers make microbial polysaccharides an excellent choice for biopharmaceuticals. Due to its easy purifying procedure and high production efficiency, it is capable of resolving the existing application issues associated with some plant and animal polysaccharides. Furthermore, microbial polysaccharides are recognized as prospective substitutes for these polysaccharides based on the search for eco-friendly chemicals. In this review, the microstructure and properties of microbial polysaccharides are utilized to highlight their characteristics and potential medical applications. From the standpoint of pathogenic processes, in-depth explanations are provided on the effects of microbial polysaccharides as active ingredients in the treatment of human diseases, anti-aging, and drug delivery. In addition, the scholarly developments and commercial applications of microbial polysaccharides as medical raw materials are also discussed. The conclusion is that understanding the use of microbial polysaccharides in biopharmaceuticals is essential for the future development of pharmacology and therapeutic medicine.

Recent progressions in biomedical and pharmaceutical applications of chitosan nanoparticles: A comprehensive review

Nowadays, the most common approaches in the prognosis, diagnosis, and treatment of diseases are along with undeniable limitations. Thus, the ever-increasing need for using biocompatible natural materials and novel practical modalities is required. Applying biomaterials, such as chitosan nanoparticles (CS NPs: FDA-approved long-chain polymer of N-acetyl-glucosamine and D-glucosamine for some pharmaceutical applications), can serve as an appropriate alternative to overcome these limitations. Recently, the biomedical applications of CS NPs have extensively been investigated. These NPs and their derivatives can not only prepare through different physical and chemical approaches but also modify with various molecules and bioactive materials. The potential properties of CS NPs, such as biocompatibility, biodegradability, serum stability, solubility, non-immunogenicity, anti-inflammatory properties, appropriate pharmacokinetics and pharmacodynamics, and so forth, have made them excellent candidates for biomedical applications. Therefore, CS NPs have efficiently applied for various biomedical applications, like regenerative medicine and tissue engineering, biosensors for the detection of microorganisms, and drug delivery systems (DDS) for the suppression of diseases. These NPs possess a high level of biosafety. In summary, CS NPs have the potential ability for biomedical and clinical applications, and it would be remarkably beneficial to develop new generations of CS-based material for the future of medicine.

Chitosan-based hemostatic sponges as new generation hemostatic materials for uncontrolled bleeding emergency: Modification, composition, and applications

The choice of hemostatic technique is a curial concern for surgery and as first-aid treatment in combat. To treat uncontrolled bleeding in complex wound environments, chitosan-based hemostatic sponges have attracted significant attention in recent years because of the excellent biocompatibility, degradability, hemostasis and antibacterial properties of chitosan and their unique sponge-like morphology for high fluid absorption rate and priority aggregation of blood cells/platelets to achieve rapid hemostasis. In this review, we provide a historical perspective on the use of chitosan hemostatic sponges as the new generation of hemostatic materials for uncontrolled bleeding emergencies in complex wounds. We summarize the modification of chitosan, review the current status of preparation protocols of chitosan sponges based on various composite systems, and highlight the recent achievements on the detailed breakdown of the existing chitosan sponges to present the relationship between their composition, physical properties, and hemostatic capacity. Finally, the future opportunities and challenges of chitosan hemostatic sponges are also proposed.

Current status of hemostatic agents, their mechanism of action, and future directions

The bleeding problem might seem straightforward, but it involves a plethora of complex biochemical pathways and responses. Hemorrhage control remains one of the leading causes of “preventable deaths” worldwide. The past few decades have seen a wide range of biomaterials and their derivatives targeted to serve as hemostatic agents, but none can be deemed as an ideal solution. In this review, we have highlighted the current diversity in hemostatic agents and their modalities. We have enclosed a comprehensive outlook of the proposed solutions and their clinical performance so far. In addition to these, several promising compositions are still in their infancy or developmental phases. The inclusion of novel upcoming nanocomposites has further widened the potencies of existing formulations as well.

Sprayable surface-adaptive biocompatible membranes for efficient hemostasis via assembly of chitosan and polyphosphate

This work describes a hemostatic membrane system (or surface coating) based on spray-assisted layer-by-layer electrostatic assemblies of oppositely charged polyphosphate (polyP) and chitosan (Cs). The as-prepared membrane formed a robust micro-stratified porous structure with high flexibility. Both blood clotting test and rodent hepatic severe hemorrhage model revealed the excellent hemostatic performance of the membrane system, benefitting from the robust assembly and synergistic effect of polyP/Cs as well as membrane surface chemistry. Compared to Cs-topped membrane surface, polyP-sprayed one exhibited further improved hemostatic effect via promoting fibrin formation. Besides, comprehensive in vitro and in vivo evaluations demonstrated good biocompatibility and biodegradability of the membrane. The present approach that integrated the hemostasis-stimulating capability of polyP/Cs with facile spraying method is highly scalable and flexible, which is envisioned to be adapted readily for other hemostatic polyelectrolytes and surface functionalization of diverse existing hemostatic products on demand.

Chitosan-Based Hemostatic Hydrogels: The Concept, Mechanism, Application, and Prospects

The design of new hemostatic materials to mitigate uncontrolled bleeding in emergencies is challenging. Chitosan-based hemostatic hydrogels have frequently been used for hemostasis due to their unique biocompatibility, tunable mechanical properties, injectability, and ease of handling. Moreover, chitosan (CS) absorbs red blood cells and activates platelets to promote hemostasis. Benefiting from these desired properties, the hemostatic application of CS hydrogels is attracting ever-increasing research attention. This paper reviews the recent research progress of CS-based hemostatic hydrogels and their advantageous characteristics compared to traditional hemostatic materials. The effects of the hemostatic mechanism, effects of deacetylation degree, relative molecular mass, and chemical modification on the hemostatic performance of CS hydrogels are summarized. Meanwhile, some typical applications of CS hydrogels are introduced to provide references for the preparation of efficient hemostatic hydrogels. Finally, the future perspectives of CS-based hemostatic hydrogels are presented.

Optimization Preparation and Evaluation of Chitosan Grafted Norfloxacin as a Hemostatic Sponge

Considering the great harm to the human body caused by severe and massive bleeding, in this study, chitosan-grafted norfloxacin (CTS-NF) composites were prepared with chitosan (CTS) and norfloxacin (NF) as raw materials by a 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide-mediated coupling method to solve the limitations of slow hemostatic and poor anti-infective effects of current dressings on the market. The effects of the mass ratio of CTS to NF (M_CTS/M_NF), reaction temperature T and reaction time t on the grafting rate (η%) of the products were investigated through single factor tests. The preparation process was optimized with the η% as an evaluation index by means of the Box-Behnken test design and response surface analysis. The antimicrobial activity was evaluated by inhibition zone assay, and the hemostatic activity of the prepared composites was evaluated in vitro and in vivo. The results suggested that the optimum preparation conditions were the mass ratio of CTS to NF (M_CTS/M_NF) 5:3, reaction temperature 65 °C, and reaction time 4 h. Under this condition, the η% of CTS-NF was 45.5%. The CTS-NF composites displayed significant antimicrobial activities. Moreover, in vitro hemostasis results revealed that the CTS-NF composite had a lower blood clotting index and absorbed red blood cells to promote aggregation. In vivo ear and live hemostasis, the CTS-NF groups showed short hemostatic time (49.75 ± 3.32 s and 50.00 ± 7.21 s) and more blood loss (0.07 ± 0.010 g and 0.075 ± 0.013 g). The results showed that CTS-NF reduced the bleeding time and volume, exhibiting a significant coagulation effect. Therefore, the CTS-NF sponge is expected to be a new, effective hemostatic and antibacterial material in the future.

Characterization and Analysis of Chitosan-Gelatin Composite-Based Biomaterial Effectivity as Local Hemostatic Agent: A Systematic Review

Chitosan and gelatin were the most widely used natural materials in pharmaceutical and medical fields, especially as local hemostatic agents, independently or as a composite material with the addition of other active substances. Chitosan and gelatin have excellent properties in biocompatibility, biodegradability, non-toxicity and water absorption capacity. The objective of this review was to analyze the characteristics of chitosan-gelatin (CG) composite-based biomaterial and its effectivity as a local hemostatic agent. We used PRISMA guidelines and the PICO framework to compile this review. The findings demonstrated that the CG composite-based biomaterial had excellent physical, chemical, mechanical properties and local hemostatic agent activity by adding other active substances such as oxidized fibers (OF), silica nanoparticles (SiNPs), calcium (Ca) and biphasic calcium phosphate (BCP) or by setting the CG composite proportion ratio.

Bioinspired multifunctional injectable hydrogel for hemostasis and infected wound management

Routine wound management faces significant challenges including rebleeding and bacterial infection that affect millions of people each year. However, conventional wound dressings (e.g., gauze, bandage) are limited to simply cover the injured surfaces and rarely show special functionality to promote the wound recovery. Currently, injectable hydrogels have been widely designed as multifunctional wound dressings to manage the hemostatic and wound healing process. Nevertheless, the integration of multiple functions through simple composition and easy construction is still difficult and hardly achieved. Herein, we reported a bioinspired multifunctional injectable hydrogel (CQCS@gel) consisted of only two components, catechol-functionalized quaternized chitosan (CQCS) and dibenzaldehyde-terminated poly(ethylene glycol) (DB-PEG₂₀₀₀). The building blocks endowed CQCS@gel with tissue-adhesive, antibacterial, antioxidant, self-healing and pH-responsive properties. Based on the in vivo hemostatic study, quick hemostasis for acute tissue injuries such as liver and carotid wounds was realized owing to the rapid gelation rate and strong tissue-adhesiveness of CQCS@gel. Moreover, CQCS@gel remarkably boosted the chronic recovery process of MRSA-infected cutaneous wounds by promoting collagen deposition, hair follicles regeneration and angiogenesis. Overall, this multifunctional injectable hydrogel shows potentials as a universal wound dressing in clinical applications, enabling both hemostasis and infected wound management. STATEMENT OF SIGNIFICANCE: This is the first report showing the multifunctional injectable hydrogel (CQCS@gel) consisted of catechol-functionalized quaternized chitosan and dibenzaldehyde-terminated poly(ethylene glycol). The incorporation of quaternary ammonium groups imparted the CQCS@gel with outstanding contact-active bacterial killing efficiency and the catechol moieties enhanced its tissue adhesive and antioxidant properties. Moreover, the reversible imine crosslinks endowed the CQCS@gel with self-healing and pH-responsive drug release capabilities. These multiple functions were integrated into a single injectable hydrogel system with easy availability and low cost. In vitro and in vivo results showed that the newly designed hydrogel was biocompatible, realized successful sealing hemostasis under multiple bleeding scenarios and enabled accelerated healing of infected skin wounds.

Novel Cytocompatible Chitosan Schiff Base Derivative as a Potent Antibacterial, Antidiabetic, and Anticancer Agent

This study intends to develop a novel bioactive chitosan Schiff base (CTS-SB) derivative via coupling of chitosan (CTS) with 4-((5, 5-dimethyl-3-oxocyclohex-1-en-1-yl) amino) benzene-sulfonamide. The alteration in the chemical structure of CTS-SB was verified using 1H NMR and FT-IR analysis, while the thermal and morphological properties were inspected by TGA and SEM characterization tools, respectively. Ion exchange capacity of the developed CTS-SB derivative recorded a maximal value of 12.1 meq/g compared to 10.1 meq/g for pristine CTS. In addition, antibacterial activity of CTS-SB derivative was greatly boosted against Escherichia coli (E coli) and Staphylococcus aureus (S. aureus) bacteria. Minimum inhibition concentration of CTS-SB derivative was perceived at 50 µg/mL, while the highest concentration (250 µg/mL) could inhibit the growth of S. aureus up to 91%. What’s more, enhanced antidiabetic activity by CTS-SB derivative, which displayed higher inhibitory values of α-amylase (57.9%) and α-glucosidase (63.9%), compared to those of pure CTS (49.8 and 53.4%), respectively Furthermore, cytotoxicity investigation on HepG-2 cell line revealed potential anticancer activity along with good safety margin against primary human skin fibroblasts (HSF cells) and decent cytocompatibility. Collectively, the gained results hypothesized that CTS-SB derivative could be effectively applied as a promising antibacterial, anticancer and antidiabetic agent for advanced biomedical applications.

Shape-Memory-Reduced Graphene/Chitosan Cryogels for Non-Compressible Wounds

In this study, an antibacterial and shape-memory chitosan cryogel with high blood absorption and fast recovery from non-compressible wounds was prepared using a one-step method. Herein, we prepared a shape-memory-reduced graphene/chitosan (rGO-CTS) cryogel using a one-step method with a frozen mixing solution of chitosan, citric acid, dopamine, and graphene oxide, before treating it with alkaline solutions. The alkaline solution not only promoted the double cross-linking of chitosan but also induced dopamine to form polydopamine-reducing graphene oxide. Scanning electron microscope (SEM) images showed that the rGO-CTS cryogel possessed a uniform porous network structure, attributing excellent water-induced shape-memory properties. Moreover, the rGO-CTS cryogel exhibited good mechanical properties, antibacterial activity, and biocompatibility. In mouse liver trauma models, the rGO-CTS cryogel showed good blood clotting and hemostatic capabilities. Therefore, this composite cryogel has great potential as a new hemostatic material for application to non-compressible wounds.

Microwave assisted preparation of a hemostatic gauze with mesoporous silica through in-situ synthesis

The medical disinfection cotton gauze is the most frequently used medical consumables for wound care. Here this ordinary commercial gauze was upgraded to a hemostatic gauze, which was loaded with mesoporous silica through in-situ synthesis and further microwave treatment. The original cotton gauze was pretreated with NaOH solutions for surface activation, soaked in double-silica source precursor solution for moderate in-situ synthesis, treated with microwave for quick template removement and dehydration. The final obtained hemostatic gauze (MS-G₁) showed superior physical, biocompatible and hemostatic advantages. The newborn mesoporous silica was firmly anchored onto the cotton fiber surface with <20% leaching after 10 min of sonication. The microwave treatment not only shortened the time for template removal but also promotes the formation of mesoporous structure. The clotting blood time (CBT) of MS-G₁ were only (62.00 ± 5.56 s), which was 23.14% shorter than that of original medical gauze, and even 3.6% shorter than Combat Gauze (CG). MS-G₁ also showed excellent biocompatibility in cytotoxicity tests of L-929 cells, with a 116% proliferation rate at the concentration of 5 mg/mL. Furthermore, the hemostatic performance was explored on a rabbit wound model of hemorrhagic liver injury, and MS-G₁ showed both shorter hemostasis time (113.75 s) and less blood loss (1.69 g) than that of CG (180.00 s, 5.13 g). The hemostatic gauze anchored with mesoporous silica was expected to be an excellent prehospital hemostatic dressing for field first aid.

Chemically crosslinked hyaluronic acid-chitosan hydrogel for application on cartilage regeneration

Articular cartilage is an avascular tissue that lines the ends of bones in diarthrodial joints, serves as support, acts as a shock absorber, and facilitates joint's motion. It is formed by chondrocytes immersed in a dense extracellular matrix (principally composed of aggrecan linked to hyaluronic acid long chains). Damage to this tissue is usually associated with traumatic injuries or age-associated processes that often lead to discomfort, pain and disability in our aging society. Currently, there are few surgical alternatives to treat cartilage damage: the most commonly used is the microfracture procedure, but others include limited grafting or alternative chondrocyte implantation techniques, however, none of them completely restore a fully functional cartilage. Here we present the development of hydrogels based on hyaluronic acid and chitosan loaded with chondroitin sulfate by a new strategy of synthesis using biodegradable di-isocyanates to obtain an interpenetrated network of chitosan and hyaluronic acid for cartilage repair. These scaffolds act as delivery systems for the chondroitin sulfate and present mucoadhesive properties, which stabilizes the clot of microfracture procedures and promotes superficial chondrocyte differentiation favoring a true articular cellular colonization of the cartilage. This double feature potentially improves the microfracture technique and it will allow the development of next-generation therapies against articular cartilage damage.

Nanofibrous hemostatic materials: Structural design, fabrication methods, and hemostatic mechanisms

Development of rapid and effective hemostatic materials has always been the focus of research in the healthcare field. Nanofibrous materials which recapitulate the delicate nano-topography feature of fibrin fibers produced during natural hemostatic process, offer large length-to-diameter ratio and surface area, tunable porous structure, and precise control in architecture, showing great potential for staunching bleeding. Here we present a comprehensive review of advances in nanofibrous hemostatic materials, focusing on the following three important parts: structural design, fabrication methods, and hemostatic mechanisms. This review begins with an introduction to the physiological hemostatic mechanism and current commercial hemostatic agents. Then, it focuses on recent progress in electrospun nanofibrous hemostatic materials in terms of composition and structure control, surface modification, and in-situ deposition. The article emphasizes the development of three-dimensional (3D) electrospun nanofibrous materials and their emerging evolution for improving hemostatic function. Next, it discusses the fabrication of self-assembling peptide or protein-mimetic peptide nanofibers, co-assembling supramolecular nanofibers, as well as other nanofibrous hemostatic agents. Further, the article highlights the external and intracavitary hemostatic management based on various nanofiber aggregates. In the end, this review concludes with the current challenges and future perspectives of nanofibrous hemostatic materials. STATEMENT OF SIGNIFICANCE: This article reviews recent advances in nanofibrous hemostatic materials including fabrication methods, composition and structural control, performance improvement, and hemostatic mechanisms. A variety of methods including electrospinning, self-assembly, grinding and refining, template synthesis, and chemical vapor deposition, have been developed to prepare nanofibrous materials. These methods provide robustness in control of the nanofiber architecture in the forms of hydrogels, two-dimensional (2D) membranes, 3D sponges, or composites, showing promising potential in the external and intracavitary hemostasis and wound healing applications. This review will be of great interest to the broad readers in the field of hemostatic materials and multifunctional biomaterials.

Design of biopolymer-based hemostatic material: Starting from molecular structures and forms

Uncontrolled bleeding remains as a leading cause of death in surgical, traumatic, and emergency situations. Management of the hemorrhage and development of hemostatic materials are paramount for patient survival. Owing to their inherent biocompatibility, biodegradability and bioactivity, biopolymers such as polysaccharides and polypeptides have been extensively researched and become a focus for the development of next-generation hemostatic materials. The construction of novel hemostatic materials requires in-depth understanding of the physiological hemostatic process, fundamental hemostatic mechanisms, and the effects of material chemistry/physics. Herein, we have recapitulated the common hemostatic strategies and development status of biopolymer-based hemostatic materials. Furthermore, the hemostatic mechanisms of various molecular structures (components and chemical modifications) are summarized from a microscopic perspective, and the design based on them are introduced. From a macroscopic perspective, the design of various forms of hemostatic materials, e.g., powder, sponge, hydrogel and gauze, is summarized and compared, which may provide an enlightenment for the optimization of hemostat design. It has also highlighted current challenges to the development of biopolymer-based hemostatic materials and proposed future directions in chemistry design, advanced form and clinical application.

•

Biopolymers possess sound biocompatibility, biodegradability and bioactivity for the design of hemostatic materials.

•

Molecular structure designs including component and chemical modification are summarized from a microscopic perspective.

•

Design of various forms of hemostatic materials is discussed and compared synthetically from a macroscopic perspective.

Prospective, randomized, controlled, noninferiority clinical trial to evaluate the safety and efficacy of absorbable macroporous polysaccharide composites as adjunct to hemostasis during open surgery

BACKGROUND

To address intraoperative bleeding in cardiac surgery, reducing blood transfusion requirements, is mandatory to achieve effective hemostasis. Hemostatic agents may limit localized persistent bleeding. The introduction of carboxymethyl-chitosan component into the hemostatic agent and the application of the radiation crosslinking technique maintain its capacity for achieving intraoperative hemostasis, thus increasing the clinical utility.

METHODS

A prospective, noninferiority and randomized controlled clinical trial to compare the safety and efficacy of absorbable macroporous polysaccharide composites (AMPC, treatment group) with compound microporous polysaccharide hemostatic powder (CMPHP, control group) (2:1 ratio) as adjuncts to hemostasis in open surgery. The main indication was used for hemostasis in various traumatic hemorrhage areas, including cardiothoracic, vascular, and general surgery. The primary endpoint was success rate of hemostasis within 300 s (at a 10% noninferiority margin). The secondary endpoint was hemostasis time. Both endpoints were assessed in the modified intention-to-treat (MITT) population. Safety parameters were assessed. This study is fully compliant with the CONSORT statement.

RESULTS

Randomized patients in AMPC and CMPHP groups were 168 and 84, respectively. In MITT population, the success rates of hemostasis within 300 s were 98.8% (163 of 165) in AMPC and 94.0% (78 of 83) in CMPHP (treatment difference 4.8% [95% CI -0.57% to 10.20%]). AMPC was thus noninferior to CMPHP. Hemostasis time (median [interquartile range]) with AMPC (87 [52.5, 180] s) was better than CMPHP (110 [54.5, 181] s). Changes in laboratory parameters over time and shifts to abnormal values were typical of surgeries and similar between two groups. No noticeable adverse effects associated with AMPC or CMPHP were observed.

CONCLUSIONS

AMPC is well tolerated as topical hemostatic agent, noninferior to commercial CMPHP, and exhibits excellent safety. This study provides a novel hemostatic agent which appears to offer significant clinical advantage in various hemorrhage areas.

Oxidized dextran crosslinked polysaccharide/protein/polydopamine composite cryogels with multiple hemostatic efficacies for noncompressible hemorrhage and wound healing

Noncompressible hemorrhage caused by gunshots and sharp objects leads to higher trauma mortality, and cryogels have great potential in controlling noncompressible hemorrhage applications owing to their shape-memory properties. However, the use of non-toxic crosslinkers to prepare cryogels for noncompressible hemorrhage remains a challenge. In this study, a series of cryogels were prepared using oxidized dextran (ODex) as a biocompatible crosslinker, combined with the good hemostatic properties of chitosan (CS) and human-like collagen (HLC), and polydopamine nanoparticles (PDA-NPs) were also introduced to strengthen the shape recovery speed of the cryogels and further enhance their hemostatic performance. The CS/HLC/ODex/PDA-NPs (CHOP) cryogels presented a highly interconnected macroporous structure, powerful water/blood absorption capacity, robust mechanical performance, and rapid water/blood-triggered shape recovery. In vitro coagulation and coagulation mechanism tests showed that CHOP exhibited strong procoagulant ability, high adhesion to blood cells and fibrinogen, and the capacity to activate platelets and intrinsic pathways. In vivo hemostatic tests indicated that CHOP could effectively shorten the bleeding time and reduce the bleeding volume of liver incision bleeding and liver noncompressible hemorrhage. Meanwhile, CHOP exhibited good biocompatibility and biodegradability, and could promote wound healing. These results suggest that CHOP cryogels will be a promising hemostatic dressing.

Chitosans and Nanochitosans: Recent Advances in Skin Protection, Regeneration, and Repair

Chitosan displays a dual function, acting as both an active ingredient and/or carrier for pharmaceutical bioactive molecules and metal ions. Its hydroxyl- and amino-reactive groups and acetylation degree can be used to adjust this biopolymer's physicochemical and pharmacological properties in different forms, including scaffolds, nanoparticles, fibers, sponges, films, and hydrogels, among others. In terms of pharmacological purposes, chitosan association with different polymers and the immobilization or entrapment of bioactive agents are effective strategies to achieve desired biological responses. Chitosan biocompatibility, water entrapment within nanofibrils, antioxidant character, and antimicrobial and anti-inflammatory properties, whether enhanced by other active components or not, ensure skin moisturization, as well as protection against bacteria colonization and oxidative imbalance. Chitosan-based nanomaterials can maintain or reconstruct skin architecture through topical or systemic delivery of hydrophilic or hydrophobic pharmaceuticals at controlled rates to treat skin affections, such as acne, inflammatory manifestations, wounds, or even tumorigenesis, by coating chemotherapy drugs. Herein, chitosan obtention, physicochemical characteristics, chemical modifications, and interactions with bioactive agents are presented and discussed. Molecular mechanisms involved in chitosan skin protection and recovery are highlighted by overlapping the events orchestrated by the signaling molecules secreted by different cell types to reconstitute healthy skin tissue structures and components.

Polydopamine Biomaterials for Skin Regeneration

Designing biomaterials capable of biomimicking wound healing and skin regeneration has been receiving increasing attention recently. Some biopolymers behave similarly to the extracellular matrix (ECM), supporting biointerfacial adhesion and intrinsic cellular interactions. Polydopamine (PDA) is a natural bioadhesive and bioactive polymer that endows high chemical versatility, making it an exciting candidate for a wide range of biomedical applications. Moreover, biomaterials based on PDA and its derivatives have near-infrared (NIR) absorption, excellent biocompatibility, intrinsic antioxidative activity, antibacterial activity, and cell affinity. PDA can regulate cell behavior by controlling signal transduction pathways. It governs the focal adhesion behavior of cells at the biomaterials interface. These features make melanin-like PDA a fascinating biomaterial for wound healing and skin regeneration. This paper overviews PDA-based biomaterials' synthesis, properties, and interactions with biological entities. Furthermore, the utilization of PDA nano- and microstructures as a constituent of wound-dressing formulations is highlighted.