Mixed Matrix Membranes of Boron Icosahedron and Polymers of Intrinsic Microporosity (PIM-1) for Gas Separation

Current biofabrication methods for vascular tissue engineering and an introduction to biological textiles

Cardiovascular diseases are the leading cause of mortality in the world and encompass several important pathologies, including atherosclerosis. In the cases of severe vessel occlusion, surgical intervention using bypass grafts may be required. Synthetic vascular grafts provide poor patency for small-diameter applications (< 6 mm) but are widely used for hemodialysis access and, with success, larger vessel repairs. In very small vessels, such as coronary arteries, synthetics outcomes are unacceptable, leading to the exclusive use of autologous (native) vessels despite their limited availability and, sometimes, quality. Consequently, there is a clear clinical need for a small-diameter vascular graft that can provide outcomes similar to native vessels. Many tissue-engineering approaches have been developed to offer native-like tissues with the appropriate mechanical and biological properties in order to overcome the limitations of synthetic and autologous grafts. This review overviews current scaffold-based and scaffold-free approaches developed to biofabricate tissue-engineered vascular grafts (TEVGs) with an introduction to the biological textile approaches. Indeed, these assembly methods show a reduced production time compared to processes that require long bioreactor-based maturation steps. Another advantage of the textile-inspired approaches is that they can provide better directional and regional control of the TEVG mechanical properties.

Boosting gas separation performance and suppressing the physical aging of polymers of intrinsic microporosity (PIM-1) by nanomaterial blending

In recent decades, polymers of intrinsic microporosity (PIMs), especially the firstly introduced PIM-1, have been actively explored for various membrane-based separation purposes and widely recognized as the next generation membrane materials of choice for gas separation due to their ultra-permeable characteristics. Unfortunately, the polymers suffer substantially the negative impacts of physical aging, a phenomenon that is primarily noticeable in high free volume polymers. The phenomenon occurs at the molecular level, which leads to changes in the physical properties, and consequently the separation performance and membrane durability. This review discusses the strategies that have been employed to manage the physical aging issue, with a focus on the approach of blending with nanomaterials to give mixed matrix membranes. A detailed discussion is provided on the types of materials used, their inherent properties, the effects on gas separation performance, and their benefits in the suppression of the aging problem.

Ultrathin permselective membranes: the latent way for efficient gas separation

Membrane gas separation has attracted the attention of chemical engineers for the selective separation of gases. Among the different types of membranes used, ultrathin membranes are recognized to break the trade-off between selectivity and permeance to provide ultimate separation. Such success has been associated with the ultrathin nature of the selective layer as well as their defect-free structure. These membrane features can be obtained from specific membrane preparation procedures used, in which the intrinsic properties of different nanostructured materials (e.g., polymers, zeolites, covalent-organic frameworks, metal-organic frameworks, and graphene and its derivatives) also play a crucial role. It is likely that such a concept of membranes will be explored in the coming years. Therefore, the goal of this review study is to give the latest insights into the use of ultrathin selective barriers, highlighting and describing the primary membrane preparation protocols applied, such as atomic layer deposition, in situ crystal formation, interfacial polymerization, Langmuir-Blodgett technique, facile filtration process, and gutter layer formation, to mention just a few. For this, the most recent approaches are addressed, with particular emphasis on the most relevant results in separating gas molecules. A brief overview of the fundamentals for the application of the techniques is given. Finally, by reviewing the ongoing development works, the concluding remarks and future trends are also provided.

Biomethane generation from biogas upgrading by means of thin-film composite membrane comprising Linde T and fluorinated polyimide: optimization of fabrication parameters

Generation of biogas from organic substances is an attractive evolution of energy generation from fossil-based energy supply to renewable resources. In order to exhibit viability in terms of technical execution while being economically feasible, successful purification strategies for biomethane formation must be applicable to industrial gas streams at realistic pressures and temperatures. Membrane-based upgrading technologies have great potential to promote biogas processes because they involve less energy and low maintenance. However, the development of membranes with good polymer-filler contact and minimum defects remains a great challenge. Hitherto, researchers have been making many attempts at developing an established route to fabricate thin-film composite membranes. In the present work, an innovative coupling between Linde T and fluorinated polyimide was employed for biogas upgrading. A facile technique for membrane fabrication was proposed via optimization of the fabrication parameters. The results indicated that composite membrane fabricated with 2 hours of total dispersion duration demonstrated a homogeneous distribution of Linde T particles in the fluorinated polyimide matrix and improved the separation characteristics by up to 172% in upgrading biomethane quality. Thus, the fabricated membrane is feasible to be employed for large-scale and lucrative production with enhanced performance in biogas purification via the feasible fabrication method employed in this work.

Generation of biogas from organic substances is an attractive evolution of energy generation from fossil-based energy supply to renewable resources.

Mixed Matrix Membranes

In recent decades, mixed matrix membranes (MMMs) have attracted considerable interest in research laboratories worldwide, motivated by the gap between the growing interest in developing novel mixed matrix membranes by various research groups and the lack of large-scale implementation. This Special Issue contains six publications dealing with the current opportunities and challenges of mixed matrix membranes development and applications as solutions for the environmental and health challenges of 21st century society.

Evidences of the Effect of GO and rGO in PCL Membranes on the Differentiation and Maturation of Human Neural Progenitor Cells

The effect of doping graphene oxide (GO) and reduced graphene oxide (rGO) into poly(ε-caprolactone) (PCL) membranes prepared by solvent induced phase separation is evaluated in terms of nanomaterial distribution and compatibility with neural stem cell growth and functional differentiation. Raman spectra analyses demonstrate the homogeneous distribution of GO on the membrane surface while rGO concentration increases gradually toward the center of the membrane thickness. This behavior is associated with electrostatic repulsion that PCL exerted toward the polar GO and its affinity for the non-polar rGO. In vitro cell studies using human induced pluripotent cell derived neural progenitor cells (NPCs) show that rGO increases marker expression of NPCs differentiation with respect to GO (significantly to tissue culture plate (TCP)). Moreover, the distinctive nanomaterials distribution defines the cell-to-nanomaterial interaction on the PCL membranes: GO nanomaterials on the membrane surface favor higher number of active matured neurons, while PCL/rGO membranes present cells with significantly higher magnitude of neural activity compared to TCP and PCL/GO despite there being no direct contact of rGO with the cells on the membrane surface. Overall, this work evidences the important role of rGO electrical properties on the stimulation of neural cell electro-activity on PCL membrane scaffolds.