Sorption Thermodynamics of CO₂, H₂O, and CH₃OH in a Glassy Polyetherimide: A Molecular Perspective

Experimental Study for the Sorption and Diffusion of Supercritical Carbon Dioxide into Polyetherimide

Supercritical carbon dioxide (SCCO2) is a non-toxic and environmentally friendly fluid and has been used in polymerization reactions, processing, foaming, and plasticizing of polymers. Exploring the behavior and data of SCCO2 sorption and dissolution in polymers provides essential information for polymer applications. This study investigated the sorption and diffusion of SCCO2 into polyetherimide (PEI). The sorption and desorption processes of SCCO2 in PEI samples were measured in the temperature range from 40 to 60 °C, the pressure range from 20 to 40 MPa, and the sorption time from 0.25 to 52 h. This study used the ex situ gravimetric method under different operating conditions and applied the Fickian diffusion model to determine the mass diffusivity of SCCO2 during sorption and desorption processes into and out of PEI. The equilibrium mass gain fraction of SCCO2 into PEI was reported from 9.0 wt% (at 60 °C and 20 MPa) to 12.8 wt% (at 40 °C and 40 MPa). The sorption amount increased with the increasing SCCO2 pressure and decreased with the increasing SCCO2 temperature. This study showed the crossover phenomenon of equilibrium mass gain fraction isotherms with respect to SCCO2 density. Changes in the sorption mechanism in PEI were observed when the SCCO2 density was at approximately 840 kg/m3. This study qualitatively performed FTIR analysis during the SCCO2 desorption process. A CO2 antisymmetric stretching mode was observed near a wavenumber of 2340 cm-1. A comparison of loss modulus measurements of pure and SCCO2-treated PEI specimens showed the shifting of loss maxima. This result showed that the plasticization of PEI was achieved through the sorption process of SCCO2.

Thermodynamic Characterization of Polyetherimide/Single-Walled Carbon Nanotube Composites

The aim of this study is to examine the interactions of composite materials obtained by adding single-walled carbon nanotubes (SWCNT) to polyetherimide (ULTEM) in different weight ratios with various organic solvents, and to evaluate the solubility of composites in these organic solvents. The characterization of prepared composites was performed with SEM analysis. Thermodynamic properties of ULTEM/SWCNT composites were determined by the inverse gas chromatography (IGC) method at 260-285°C in infinite dilution. According to the IGC method, the retention behaviors were examined by passing different organic solvent vapors over the composites used as stationary phase, and retention diagrams were drawn using the obtained retention data. Thermodynamic parameters including Flory-Huggins interaction parameters (${\chi}_{12}^{\infty }$), equation of state interaction parameters (${\chi}_{12}^{\ast }$), weight fraction activity coefficients in infinite dilution (${\Omega}_1^{\infty }$), effective exchange energy parameters (${\chi}_{\mathrm{eff}}$), partial molar sorption enthalpies ($\Delta{\overline{H}}_1^S$), partial molar dissolution enthalpies in infinite dilution ($\Delta{\overline{H}}_1^{\infty }$) and molar evaporation enthalpies ($\Delta{\overline{H}}_v$) were calculated using the linear retention diagrams. According to ${\chi}_{12}^{\infty }$, ${\chi}_{12}^{\ast }$, ${\Omega}_1^{\infty }$ and ${\chi}_{\mathrm{eff}}$ values, organic solvents were found to be poor solvents for composites at all temperatures. Besides, the solubility parameters of composites were determined by IGC method at infinite dilution.

Continuing progress in the field of two-dimensional correlation spectroscopy (2D-COS): Part III. Versatile applications

In this review, the comprehensive summary of two-dimensional correlation spectroscopy (2D-COS) for the last two years is covered. The remarkable applications of 2D-COS in diverse fields using many types of probes and perturbations for the last two years are highlighted. IR spectroscopy is still the most popular probe in 2D-COS during the last two years. Applications in fluorescence and Raman spectroscopy are also very popularly used. In the external perturbations applied in 2D-COS, variations in concentration, pH, and relative compositions are dramatically increased during the last two years. Temperature is still the most used effect, but it is slightly decreased compared to two years ago. 2D-COS has been applied to diverse systems, such as environments, natural products, polymers, food, proteins and peptides, solutions, mixtures, nano materials, pharmaceuticals, and others. Especially, biological and environmental applications have significantly emerged. This survey review paper shows that 2D-COS is an actively evolving and expanding field.

Modelling Sorption and Transport of Gases in Polymeric Membranes across Different Scales: A Review

Professor Giulio C. Sarti has provided outstanding contributions to the modelling of fluid sorption and transport in polymeric materials, with a special eye on industrial applications such as membrane separation, due to his Chemical Engineering background. He was the co-creator of innovative theories such as the Non-Equilibrium Theory for Glassy Polymers (NET-GP), a flexible tool to estimate the solubility of pure and mixed fluids in a wide range of polymers, and of the Standard Transport Model (STM) for estimating membrane permeability and selectivity. In this review, inspired by his rigorous and original approach to representing membrane fundamentals, we provide an overview of the most significant and up-to-date modeling tools available to estimate the main properties governing polymeric membranes in fluid separation, namely solubility and diffusivity. The paper is not meant to be comprehensive, but it focuses on those contributions that are most relevant or that show the potential to be relevant in the future. We do not restrict our view to the field of macroscopic modelling, which was the main playground of professor Sarti, but also devote our attention to Molecular and Multiscale Hierarchical Modeling. This work proposes a critical evaluation of the different approaches considered, along with their limitations and potentiality.

Survey on Adsorption of Low Molecular Weight Compounds in Cu-BTC Metal-Organic Framework: Experimental Results and Thermodynamic Modeling

This contribution aims at providing a critical overview of experimental results for the sorption of low molecular weight compounds in the Cu-BTC Metal-Organic Framework (MOF) and of their interpretation using available and new, specifically developed, theoretical approaches. First, a literature review of experimental results for the sorption of gases and vapors is presented, with particular focus on the results obtained from vibrational spectroscopy techniques. Then, an overview of theoretical models available in the literature is presented starting from semiempirical theoretical approaches suitable to interpret the adsorption thermodynamics of gases and vapors in Cu-BTC. A more detailed description is provided of a recently proposed Lattice Fluid approach, the Rigid Adsorbent Lattice Fluid (RALF) model. In addition, to deal with the cases where specific self- and cross-interactions (e.g., H-bonding, Lewis acid/Lewis base interactions) play a role, a modification of the RALF model, i.e., the RALFHB model, is introduced here for the first time. An extension of both RALF and RALFHB is also presented to cope with the cases in which the heterogeneity of the rigid adsorbent displaying a different kind of adsorbent cages is of relevance, as it occurs for the adsorption of some low molecular weight substances in Cu-BTC MOF.

Development of an extended model for the permeation of environmentally hazardous CO2 gas across asymmetric hollow fiber composite membranes

This study presents an extended thermodynamic and phenomenological combined model to mitigate the environmental hazardous acid gas over composite membranes. The model has been applied to an acid gas such as carbon dioxide (CO₂) for its permeation through polyetherimide incorporated montmorillonite (Mt) nanoparticles hollow fiber asymmetric composite membranes. The well-established non-equilibrium lattice fluid (NELF) model for penetrating low molecular weight penetrant in a glassy polyetherimide (PEI) was extended to incorporate the other important polymer/filler system features such as tortuosity in acid gas diffusion pathways resulted from layered filler aspect ratio and concentration. The model mentioned above predicts the behavior of acid gas in PEI-Mt composite membranes based on thermodynamic characteristics of CO₂ and PEI and tortuosity due to Mt. The calculated results are compared to experimentally determined values of CO₂ permeability through PEI-Mt composite asymmetric hollow fiber membranes at varying transmembrane pressures and Mt concentrations. A reasonable agreement was found between the model predicted behavior and experimentally determined data in terms of CO₂ solubility, Mt concentration and aspect ratio were calculated based on average absolute relative error (%AARE). The proposed modified model efficiently predicts the CO₂ permeance across MMMs up to 3 wt% Mt loadings and 6 bar pressure with ± 10%AARE.