Functional and Molecular Characterization of the Halomicrobium sp. IBSBa Inulosucrase

Improving the activity of an inulosucrase by rational engineering for the efficient biosynthesis of low-molecular-weight inulin

Inulin, a widely recognized prebiotic, has diverse applications across various industrial sectors. Although inulin is primarily produced through plant extraction, there is growing interest in enzymatic synthesis as an alternative. The enzymatic production of inulin from sucrose, which yields polymers with degrees of polymerization similar to those of plant-derived inulin, shows potential as a viable replacement for traditional extraction methods. In this study, an inulosucrase from Neobacillus bataviensis was identified, demonstrating a non-processive mechanism specifically tailored for synthesizing inulin with polymerization degrees ranging from 3 to approximately 40. The enzyme exhibited optimal activity at pH 6.5 and 55 °C, efficiently producing inulin with a yield of 50.6%. Ca2+ can improve the activity and thermostability of this enzyme. To enhance catalytic total activity, site-directed and truncated mutagenesis techniques were applied, resulting in the identification of a mutant, T149S, displaying a significant 57% increase in catalytic total activity. Molecular dynamics simulations unveiled that the heightened flexibility observed in three surface regions positively influenced enzymatic activity. This study not only contributes to the theoretical foundation for inulosucrase engineering but also presents a potential avenue for the production of inulin.

Insights in inulin binding and inulin oligosaccharide formation by novel multi domain endo-inulinases from Botrytis cinerea

World-wide, pathogenic fungi such as Botrytis cinerea cause tremendous yield losses in terms of food production and post-harvest food decay. Many fungi produce inulin-type oligosaccharides (IOSs) from inulin through endo-inulinases which typically show a two domain structure. B.cinerea lacks a two domain endo-inulinase but contains a three domain structure instead. Genome mining revealed three and four domain (d4) enzymes in the fungal kingdom. Here, three and two domain enzymes were compared in their capacity to produce IOSs from inulin. Hill kinetics were observed in three domain enzymes as compared to Michaelis-Menten kinetics in two domain enzymes, suggesting that the N-terminal extension functions as a carbohydrate binding module. Analysis of the IOS product profiles generated from purified GF6, GF12, GF16 and GF18 inulins and extensive sugar docking approaches led to enhanced insights in the active site functioning, revealing subtle differences between the endo-inulinases from Aspergillus niger and B. cinerea. Improved insights in structure-function relationships in fungal endo-inulinases offer opportunities to develop superior enzymes for the production of specific IOS formulations to improve plant and animal health (priming agents, prebiotics).

Inulin from halophilic archaeon Haloarcula: Production, chemical characterization, biological, and technological properties

Halophilic archaea are capable of producing fructans, which are fructose-based polysaccharides. However, their biochemical characterization and biological and technological properties have been scarcely studied. The aim of this study was to evaluate the production, chemical characterization, biological and technological properties of a fructan inulin-type biosynthesized by a halophilic archaeon. Fructan extraction was performed through ethanol precipitation and purification by diafiltration. The chemical structure was elucidated using Fourier Transform-Infrared Spectroscopy and Nuclear Magnetic Resonance (NMR). Haloarcula sp. M1 biosynthesizes inulin with an average molecular weight of 8.37 × 106 Da. The maximal production reached 3.9 g of inulin per liter of culture within seven days. The glass transition temperature of inulin was measured at 138.85 °C, and it exhibited an emulsifying index of 36.47 %, which is higher than that of inulin derived from chicory. Inulin from Haloarcula sp. M1 (InuH) demonstrates prebiotic capacity. This study represents the first report on the biological and technological properties of inulin derived from halophilic archaea.

Characterization of a processive inulosucrase from Lactobacillus mulieris for efficient biosynthesis of high-molecular-weight inulin

Inulin has been determined to have many exceptional properties and functions and has been used in the food and pharmaceutical fields. Recently, microbial high-molecular-weight inulin synthesized from sucrose by inulosucrase attracted much attention. In this study, a novel inulosucrase from Lactobacillus mulieris was constructed, overexpressed, purified, and identified. The recombinant enzyme displayed the maximum activity at pH 6.0 and 55 °C, and it exhibited high thermostability below 45 °C. After optimizing the production conditions, the conversion rate from 100 g/L sucrose to inulin reached 31 %, meanwhile, the maximum molecular weight of produced inulin reached 3.21 × 10⁶ g/mol. The truncated IS showed a "processive" transfructosylation process, only synthesizing a small number of short-chain oligosaccharides with polymerization degrees below 6, which was in favor of the accumulation of high-molecular-weight inulin. Given this, L. mulieris inulosucrase might be a good potential candidate for the industrial production of high-molecular-weight inulin.

Enzymatic and structural characterization of β-fructofuranosidase from the honeybee gut bacterium Frischella perrara

Fructooligosaccharide is a mixture of mostly the trisaccharide 1-kestose (GF₂), tetrasaccharide nystose (GF₃), and fructosyl nystose (GF₄). Enzymes that hydrolyze GF₃ may be useful for preparing GF₂ from the fructooligosaccharide mixture. A β-fructofuranosidase belonging to glycoside hydrolase family 32 (GH32) from the honeybee gut bacterium Frischella perrara (FperFFase) was expressed in Escherichia coli and purified. The time course of the hydrolysis of 60 mM sucrose, GF₂, and GF₃ by FperFFase was analyzed, showing that the hydrolytic activity of FperFFase for trisaccharide GF₂ was lower than those for disaccharide sucrose and tetrasaccharide GF₃. The crystal structure of FperFFase and its structure in complex with fructose were determined. FperFFase was found to be structurally homologous to bifidobacterial β-fructofuranosidases even though bifidobacterial enzymes preferably hydrolyze GF₂ and the amino acid residues interacting with fructose at subsite - 1 are mostly conserved between them. A proline residue was inserted between Asp298 and Ser299 using site-directed mutagenesis, and the activity of the variant 298P299 was measured. The ratio of activities for 60 mM GF₂/GF₃ by wild-type FperFFase was 35.5%, while that of 298P299 was 23.6%, indicating that the structure of the loop comprising Trp297-Asp298-Ser299 correlated with the substrate preference of FperFFase. The crystal structure also shows that a loop consisting of residues 117-127 is likely to contribute to the substrate binding of FperFFase. The results obtained herein suggest that FperFFase is potentially useful for the manufacture of GF₂. KEY POINTS: • Frischella β-fructofuranosidase hydrolyzed nystose more efficiently than 1-kestose. • Trp297-Asp298-Ser299 was shown to be correlated with the substrate preference. • Loop consisting of residues 117-127 appears to contribute to the substrate binding.

A novel chicory fructanase can degrade common microbial fructan product profiles and displays positive cooperativity

Fructan metabolism in bacteria and plants relies on fructosyltransferases and fructanases. Plant fructanases (fructan exohydrolase, FEH) only hydrolyse terminal fructose residues. Levan (β-2,6 linkages) is the most abundant fructan type in bacteria. Dicot fructan accumulators, such as chicory (Cichorium intybus), accumulate inulin (β-2,1 linkages), harbouring several 1-FEH isoforms for their degradation. Here, a novel chicory fructanase with high affinity for levan was characterized, providing evidence that such enzymes widely occur in higher plants. It is adapted to common microbial fructan profiles, but has low affinity towards chicory inulin, in line with a function in trimming of microbial fructans in the extracellular environment. Docking experiments indicate the importance of an N-glycosylation site close to the active site for substrate specificity. Optimal pH and temperature for levan hydrolysis are 5.0 and 43.7 °C, respectively. Docking experiments suggested multiple substrate binding sites and levan-mediated enzyme dimerization, explaining the observed positive cooperativity. Alignments show a single amino acid shift in the position of a conserved DXX(R/K) couple, typical for sucrose binding in cell wall invertases. A possible involvement of plant fructanases in levan trimming is discussed, in line with the emerging 'fructan detour' concepts, suggesting that levan oligosaccharides act as signalling entities during plant-microbial interactions.

Improving the Thermostability and Catalytic Activity of an Inulosucrase by Rational Engineering for the Biosynthesis of Microbial Inulin

Thermostability and enzymatic activity are two vital indexes determining the application of an enzyme on an industrial scale. A truncated inulosucrase, Laga-ISΔ138-702, from Lactobacillus gasseri showed high catalysis activity. To further enhance its thermostability and activity, multiple sequence alignment (MSA) and rational design based on the modeled structure were performed. Variants A446E, S482A, I614M, and A627S were identified with an improved denaturation temperature (T_m) of more than 1 °C. A combinational mutation method was further carried out to explore the synergistic promotion effects of single-point mutants. Additionally, 33 residues at the N-terminus were truncated to construct mutant M4^N-33. The half-life of M4^N-33 at 55 °C increased by 120 times compared to that of Laga-ISΔ138-702, and the relative activity of M4^N-33 increased up to 152% at the optimal pH and temperature (pH 5.5 and 60 °C). Molecular dynamics (MD) simulations illustrated the decreased b-factor of the surface loop of M4^N-33.