Recent Development of Plasmonic Resonance-Based Photocatalysis and Photovoltaics for Solar Utilization

Recent Advances and Insights in Designing ZnxCd1-xS-Based Photocatalysts for Hydrogen Production and Synergistic Selective Oxidation to Value-Added Chemical Production

Combining the hydrogen (H2) extraction process and organic oxidation synthesis in photooxidation-reduction reactions mediated by semiconductors is a desirable strategy because rich chemicals are evolved as byproducts along with hydrogen in trifling conditions upon irradiation, which is the only effort. The bifunctional photocatalytic strategy facilitates the feasible formation of a C═O/C─C bond from a large number of compounds containing a X-H (X = C, O) bond; therefore, the production of H2 can be easily realized without support from third agents like chemical substances, thus providing an eco-friendly and appealing organic synthesis strategy. Among the widely studied semiconductor nanomaterials, ZnxCd1-xS has been continuously studied and explored by researchers over the years, and it has attracted much consideration owing to its unique advantages such as adjustable band edge position, rich elemental composition, excellent photoelectric properties, and ability to respond to visible light. Therefore, nanostructures based on ZnxCd1-xS have been widely studied as a feasible way to efficiently prepare hydrogen energy and selectively oxidize it into high-value fine chemicals. In this Review, first, the crystal and energy band structures of ZnxCd1-xS, the model of twin nanocrystals, the photogenerated charge separation mechanism of the ZB-WZ-ZB homojunction with crisscross bands, and the Volmer-Weber growth mechanism of ZnxCd1-xS are described. Second, the morphology, structure, modification, synthesis, and vacancy engineering of ZnxCd1-xS are surveyed, summarized, and discussed. Then, the research progress in ZnxCd1-xS-based photocatalysis in photocatalytic hydrogen extraction (PHE) technology, the mechanism of PHE, organic substance (benzyl alcohol, methanol, etc.) dehydrogenation, the factors affecting the efficiency of photocatalytic discerning oxidation of organic derivatives, and selective C-H activation and C-C coupling for synergistic efficient dehydrogenation of photocatalysts are described. Conclusively, the challenges in the applicability of ZnxCd1-xS-based photocatalysts are addressed for further research development along this line.

Surface Plasmon Resonance-Mediated Photocatalytic H2 Generation

The limited yield of H2 production has posed a significant challenge in contemporary research. To address this issue, researchers have turned to the application of surface plasmon resonance (SPR) materials in photocatalytic H2 generation. SPR, arising from collective electron oscillations, enhances light absorption and facilitates efficient separation and transfer of electron-hole pairs in semiconductor systems, thereby boosting photocatalytic H2 production efficiency. However, existing reviews predominantly focus on SPR noble metals, neglecting non-noble metals and SPR semiconductors. In this review, we begin by elucidating five different SPR mechanisms, covering hot electron injection, electric field enhancement, light scattering, plasmon-induced resonant energy transfer, and photo-thermionic effect, by which SPR enhances photocatalytic activity. Subsequently, a comprehensive overview follows, detailing the application of SPR materials-metals, non-noble metals, and SPR semiconductors-in photocatalytic H2 production. Additionally, a personal perspective is offered on developing highly efficient SPR-based photocatalysis systems for solar-to-H2 conversion in the future. This review aims to guide the development of next-gen SPR-based materials for advancing solar-to-fuel conversion.

Hybrid Plasmonic Nanomaterials for Hydrogen Generation and Carbon Dioxide Reduction

The successful development of artificial photosynthesis requires finding new materials able to efficiently harvest sunlight and catalyze hydrogen generation and carbon dioxide reduction reactions. Plasmonic nanoparticles are promising candidates for these tasks, due to their ability to confine solar energy into molecular regions. Here, we review recent developments in hybrid plasmonic photocatalysis, including the combination of plasmonic nanomaterials with catalytic metals, semiconductors, perovskites, 2D materials, metal-organic frameworks, and electrochemical cells. We perform a quantitative comparison of the demonstrated activity and selectivity of these materials for solar fuel generation in the liquid phase. In this way, we critically assess the state-of-the-art of hybrid plasmonic photocatalysts for solar fuel production, allowing its benchmarking against other existing heterogeneous catalysts. Our analysis allows the identification of the best performing plasmonic systems, useful to design a new generation of plasmonic catalysts.

Progress on photocatalytic semiconductor hybrids for bacterial inactivation

Due to its use of green and renewable energy and negligible bacterial resistance, photocatalytic bacterial inactivation is to be considered a promising sterilization process. Herein, we explore the relevant mechanisms of the photoinduced process on the active sites of semiconductors with an emphasis on the active sites of semiconductors, the photoexcited electron transfer, ROS-induced toxicity and interactions between semiconductors and bacteria. Pristine semiconductors such as metal oxides (TiO₂ and ZnO) have been widely reported; however, they suffer some drawbacks such as narrow optical response and high photogenerated carrier recombination. Herein, some typical modification strategies will be discussed including noble metal doping, ion doping, hybrid heterojunctions and dye sensitization. Besides, the biosafety and biocompatibility issues of semiconductor materials are also considered for the evaluation of their potential for further biomedical applications. Furthermore, 2D materials have become promising candidates in recent years due to their wide optical response to NIR light, superior antibacterial activity and favorable biocompatibility. Besides, the current research limitations and challenges are illustrated to introduce the appealing directions and design considerations for the future development of photocatalytic semiconductors for antibacterial applications.

Plasmon-Enhanced Light Absorption in (p-i-n) Junction GaAs Nanowire Solar Cells: An FDTD Simulation Method Study

A finite-difference time-domain method is developed for studying the plasmon enhancement of light absorption from vertically aligned GaAs nanowire arrays decorated with Au nanoparticles. Vertically aligned GaAs nanowires with a length of 1 µm, a diameter of 100 nm and a periodicity of 165-500 nm are functionalized with Au nanoparticles with a diameter between 30 and 60 nm decorated in the sidewall of the nanowires. The results show that the metal nanoparticles can improve the absorption efficiency through their plasmonic resonances, most significantly within the near-bandgap edge of GaAs. By optimizing the nanoparticle parameters, an absorption enhancement of almost 35% at 800 nm wavelength is achieved. The latter increases the chance of generating more electron-hole pairs, which leads to an increase in the overall efficiency of the solar cell. The proposed structure emerges as a promising material combination for high-efficiency solar cells.

Photocatalytic activity of silica and silica-silver nanocolloids based on photo-induced formation of reactive oxygen species

Semiconductor nanomaterials are often proposed as photocatalysts for wastewater treatment; silica nanomaterials are still largely unexploited because their photocatalytic performances need improvements, especially under visible light. The present study is a proof-of-concept that amorphous silica colloids once submitted to the proper surface modifications change into an efficient photocatalyst even under low-energy illumination source. For this reason, silica-based colloidal nanomaterials, such as bare (SiO₂ NPs), aminated (NH₂-SiO₂ NPs), and Ag NPs-decorated (Ag-SiO₂ NPs) silica, are tested as photocatalysts for the degradation of 9-anthracenecarboxylic acid (9ACA), taken as a model aromatic compound. Interestingly, upon irradiation at 313 nm, NH₂-SiO₂ NPs induce 9ACA degradation, and the effect is even improved when Ag-SiO₂ NPs are used. On the other hand, irradiation at 405 nm activates the plasmon of Ag-SiO₂ NPs photocatalyst, providing a faster and more efficient photodegradation. The photodegradation experiments are also performed under white light illumination, employing a low-intensity fluorescent lamp, confirming satisfying efficiencies. The catalytic effect of SiO₂-based nanoparticles is thought to originate from photo-excitable surface defects and Ag NP plasmons since the catalytic degradation takes place only when the 9ACA is adsorbed on the surface. In addition, the involvement of reactive oxygen species was demonstrated through a scavenger use, obtaining a yield of 17%. In conclusion, this work shows the applicability of silica-based nanoparticles as photocatalysts through the involvement of silica surface defects, confirming that the silica colloids can act as photocatalysts under irradiation with monochromatic and white light. Silica and Ag-decorated silica colloids photosensitize the formation of Reactive Oxygen Species with 17% efficiencies. ROS are able to oxidase aromatic pollutants chemi-adsorbed on the surface of the colloids. Silica-silver nanocomposites present a photocatalytic activity useful to degrade aromatic compounds.

LED control of gene expression in a nanobiosystem composed of metallic nanoparticles and a genetically modified E. coli strain

BACKGROUND

Within the last decade, genetic engineering and synthetic biology have revolutionized society´s ability to mass-produce complex biological products within genetically-modified microorganisms containing elegantly designed genetic circuitry. However, many challenges still exist in developing bioproduction processes involving genetically modified microorganisms with complex or multiple gene circuits. These challenges include the development of external gene expression regulation methods with the following characteristics: spatial-temporal control and scalability, while inducing minimal permanent or irreversible system-wide conditions. Different stimuli have been used to control gene expression and mitigate these challenges, and they can be characterized by the effect they produce in the culture media conditions. Invasive stimuli that cause permanent, irreversible changes (pH and chemical inducers), non-invasive stimuli that cause partially reversible changes (temperature), and non-invasive stimuli that cause reversible changes in the media conditions (ultrasound, magnetic fields, and light).

METHODS

Opto-control of gene expression is a non-invasive external trigger that complies with most of the desired characteristics of an external control system. However, the disadvantage relies on the design of the biological photoreceptors and the necessity to design them to respond to a different wavelength for every bioprocess needed to be controlled or regulated in the microorganism. Therefore, this work proposes using biocompatible metallic nanoparticles as external controllers of gene expression, based on their ability to convert light into heat and the capacity of nanotechnology to easily design a wide array of nanostructures capable of absorbing light at different wavelengths and inducing plasmonic photothermal heating.

RESULTS

Here, we designed a nanobiosystem that can be opto-thermally triggered using LED light. The nanobiosystem is composed of biocompatible gold nanoparticles and a genetically modified E. coli with a plasmid that allows mCherry fluorescent protein production at 37 °C in response to an RNA thermometer.

CONCLUSIONS

The LED-triggered photothermal protein production system here designed offers a new, cheaper, scalable switchable method, non-destructive for living organisms, and contribute toward the evolution of bioprocess production systems.

Diatom Biosilica Doped with Palladium(II) Chloride Nanoparticles as New Efficient Photocatalysts for Methyl Orange Degradation

A new catalyst based on biosilica doped with palladium(II) chloride nanoparticles was prepared and tested for efficient degradation of methyl orange (MO) in water solution under UV light excitation. The obtained photocatalyst was characterized by X-ray diffraction, TEM and N₂ adsorption/desorption isotherms. The photocatalytic degradation process was studied as a function of pH of the solution, temperature, UV irradiation time, and MO initial concentration. The possibilities of recycling and durability of the prepared photocatalysts were also tested. Products of photocatalytic degradation were identified by liquid chromatography–mass spectrometry analyses. The photocatalyst exhibited excellent photodegradation activity toward MO degradation under UV light irradiation. Rapid photocatalytic degradation was found to take place within one minute with an efficiency of 85% reaching over 98% after 75 min. The proposed mechanism of photodegradation is based on the assumption that both HO^• and O₂^•− radicals, as strongly oxidizing species that can participate in the dye degradation reaction, are generated by the attacks of photons emitted from diatom biosilica (photonic scattering effect) under the influence of UV light excitation. The degradation efficiency significantly increases as the intensity of photons emitted from biosilica is enhanced by palladium(II) chloride nanoparticles immobilized on biosilica (synergetic photonic scattering effect).

Hot Electrons in TiO2-Noble Metal Nano-Heterojunctions: Fundamental Science and Applications in Photocatalysis

Plasmonic photocatalysis enables innovation by harnessing photonic energy across a broad swathe of the solar spectrum to drive chemical reactions. This review provides a comprehensive summary of the latest developments and issues for advanced research in plasmonic hot electron driven photocatalytic technologies focusing on TiO2-noble metal nanoparticle heterojunctions. In-depth discussions on fundamental hot electron phenomena in plasmonic photocatalysis is the focal point of this review. We summarize hot electron dynamics, elaborate on techniques to probe and measure said phenomena, and provide perspective on potential applications-photocatalytic degradation of organic pollutants, CO2 photoreduction, and photoelectrochemical water splitting-that benefit from this technology. A contentious and hitherto unexplained phenomenon is the wavelength dependence of plasmonic photocatalysis. Many published reports on noble metal-metal oxide nanostructures show action spectra where quantum yields closely follow the absorption corresponding to higher energy interband transitions, while an equal number also show quantum efficiencies that follow the optical response corresponding to the localized surface plasmon resonance (LSPR). We have provided a working hypothesis for the first time to reconcile these contradictory results and explain why photocatalytic action in certain plasmonic systems is mediated by interband transitions and in others by hot electrons produced by the decay of particle plasmons.

Development of a Theoretical Model That Predicts Optothermal Energy Conversion of Gold Metallic Nanoparticles

Gold nanoparticles (AuNPs) can be found in different shapes and sizes, which determine their chemical and physical characteristics. Physical and chemical properties of metallic NPs can be tuned by changing their shape, size, and surface chemistry; therefore, this has led to their use in a wide variety of applications in many industrial and academic sectors. One of the features of metallic NPs is their ability to act as optothermal energy converters, where they absorb light at a specific wavelength and heat up their local nanosurfaces. This feature has been used in many applications where metallic NPs get coupled with thermally responsive systems to trigger an optical response. In this study, we synthesized AuNPs that are spherical in shape with an average diameter of 20.07 nm. This work assessed simultaneously theoretical and experimental techniques to evaluate the different factors that affect heat generation at the surface of AuNPs when exposed to a specific light wavelength. The results indicated that laser power, concentration of AuNPs, time × laser power interaction, and time illumination, were the most important factors that contributed to the temperature change exhibited in the AuNPs solution. We report a regression model that allows predicting heat generation and temperature changes with residual standard errors of less than 4%. These results are highly relevant in the future design and development of applications where metallic NPs are incorporated into systems to induce a temperature change triggered by light exposure.

SiO2 -Coated ZnO Nanoflakes Decorated with Ag Nanoparticles for Photocatalytic Water Oxidation

Many strategies have been adopted to improve the photoinduced features of zinc oxide nanostructures for different application fields. In this work, zinc oxide has been synthesised and decorated by plasmonic metal nanoparticles to enhance its photocatalytic activity in the visible range. Furthermore, an insulating layer of SiO₂ has been grown between the surface of zinc oxide nanoflakes and silver nanoparticles. A synthetic procedure that allows the accurate modulation of the insulating layer thickness in the range 5-40 nm has been developed. Evidences highlight the crucial role of the SiO₂ layer in dramatically increasing photocatalytic water oxidation promoted by the nanostructure under both UV and visible illumination. An ideal thickness value of about 10 nm has been demonstrated to guarantee the plasmon-induced resonance energy-transfer process and to quench the Förster resonance energy-transfer mechanism; thus, optimising the local surface plasmon resonance effect and water oxidation properties.

Plasmonics for Biosensing

Techniques based on plasmonic resonance can provide label-free, signal enhanced, and real-time sensing means for bioparticles and bioprocesses at the molecular level. With the development in nanofabrication and material science, plasmonics based on synthesized nanoparticles and manufactured nano-patterns in thin films have been prosperously explored. In this short review, resonance modes, materials, and hybrid functions by simultaneously using electrical conductivity for plasmonic biosensing techniques are exclusively reviewed for designs containing nanovoids in thin films. This type of plasmonic biosensors provide prominent potential to achieve integrated lab-on-a-chip which is capable of transporting and detecting minute of multiple bio-analytes with extremely high sensitivity, selectivity, multi-channel and dynamic monitoring for the next generation of point-of-care devices.

Insights into the Recent Progress and Advanced Materials for Photocatalytic Nitrogen Fixation for Ammonia (NH3) Production

Ammonia (NH3) is one of the key agricultural fertilizers and to date, industries are using the conventional Haber-Bosh process for the synthesis of NH3 which requires high temperature and energy. To overcome such challenges and to find a sustainable alternative process, researchers are focusing on the photocatalytic nitrogen fixation process. Recently, the effective utilization of sunlight has been proposed via photocatalytic water splitting for producing green energy resource, hydrogen. Inspired by this phenomenon, the production of ammonia via nitrogen, water and sunlight has been attracted many efforts. Photocatalytic N2 fixation presents a green and sustainable ammonia synthesis pathway. Currently, the strategies for development of efficient photocatalyst for nitrogen fixation is primarily concentrated on creating active sites or loading transition metal to facilitate the charge separation and weaken the N–N triple bond. In this investigation, we review the literature knowledge about the photocatalysis phenomena and the most recent developments on the semiconductor nanocomposites for nitrogen fixation, following by a detailed discussion of each type of mechanism.

Bulk scale fabrication of sodium tungsten bronze nanoparticles for applications in plasmonics

In order to advance plasmon-based technologies, new materials with low damping losses and high chemical stability are needed. In this letter, we report the bulk scale fabrication of sodium tungsten bronze (Na _x WO₃) nanoparticles with high Na content (x ≤ 0.83) using a furnace-assisted method. Phase purity and morphology is confirmed with x-ray diffraction and scanning electron microscopy. Plasmon responses are characterized using spectrophotometry and spatially-resolved electron energy-loss spectroscopy (EELS) in a scanning transmission electron microscope. Experimental EELS maps of individual nanoparticles show the excitation of distinct plasmon resonances at visible and near-infrared (NIR) frequencies, and these observations are supported by boundary element method simulations. Na _x WO₃ is a promising alternative material for plasmonics due to its strong plasmon resonances when compared to Au, its simple nanofabrication, and low cost. In particular, their high NIR extinction makes these materials ideal for applications in solar control window coatings or plasmonic photocatalysis.

Gold Nanoparticles Supported on Alumina as a Catalyst for Surface Plasmon-Enhanced Selective Reductions of Nitrobenzene

Au nanoparticles supported on alumina (Au/Al₂O₃) with average particle size of 3.9 ± 0.7 nm and surface plasmon band centerned at 516.5 nm were prepared by deposition-precipitation method, and their photocatalytic activities for the reduction of nitrobenzene using either formic acid in acetonitrile (method A) or KOH in 2-propanol (method B) were investigated. Even at room temperature, the Au/Al₂O₃ was found to be highly active and selective for conversion of nitrobenzene to aniline when used with formic acid in acetonitrile or to azobenzene when performed with KOH in 2-propanol under irradiation with green light-emitting diode (517 nm).

Quantum tunneling injection of hot electrons in Au/TiO2 plasmonic photocatalysts

Visible light absorption of plasmonic Au nanoparticles supported on semiconductor TiO₂ leads to injection of their photoactivated "hot electrons (e_hot^-)" into the TiO₂ conduction band. This charge separation facilitates several oxidation and reduction reactions. These plasmonic systems, however, suffer from low quantum yields because the Schottky barrier created at the Au-TiO₂ interface suppresses e_hot^- injection. Here we report that Au nanoparticles supported on the anatase particles isolated from Degussa (Evonik) P25 TiO₂ promote e_hot^- injection with much higher efficiency than those supported on other commercially-available TiO₂ and catalyze aerobic oxidation with very high quantum yield (7.7% at 550 nm). Photoelectrochemical and spectroscopic analysis revealed that the number of Ti⁴⁺ atoms located at the Au-TiO₂ interface is the crucial factor. These Ti⁴⁺ atoms neutralize the negative charge of the Au particles and create a Schottky barrier with narrower depletion layer. This facilitates efficient e_hot^- injection by "quantum tunneling" through the Schottky barrier without overbarrier energy. The e_hot^- injection depends on several factors, and loading of 2 wt% Au particles with 3.5-4 nm diameters at around room temperature exhibits the highest activity of plasmonic photocatalysis.

Enhanced photoelectrochemical response of plasmonic Au embedded BiVO4/Fe2O3 heterojunction

The effect of embedding Au nanoparticles (NPs) in a BiVO₄/Fe₂O₃ heterojunction for photoelectrochemical water splitting is studied here for the first time.