Enhanced Performance of Magnetic Graphene Oxide-Immobilized Laccase and Its Application for the Decolorization of Dyes

Immobilization of recombinant serine protease from Virgobacillus natechei FarDT on amino graphene-chitosan biocompatible nanohybrid for enhancing pH and thermal stability

The serine protease gene was heterologously expressed in Escherichia coli BL21 (DE3) using the PET 28a vector. The purified enzyme was immobilized on a nanohybrid of amino graphene and chitosan. The characterization of synthesized nanohybrids and immobilized enzymes was confirmed by Fourier transform infrared (FTIR), X-ray diffraction (XRD), dynamic light scattering (DLS), and field emission scanning electron microscopy (FE-SEM). Immobilization increased the temperature optimum from 60 to 70 °C for both free and immobilized enzymes, while the optimal pH of the enzymes did not change post-immobilization (pH 8). The immobilized biocatalyst significantly enhanced thermal stability, as well as enzyme stability at significant pH ranges. After 30 days of storage, the immobilized enzymes exhibited approximately 83 % of their relative activity, while the free protease retained only 56 % of its initial activity. Stabilization also altered the kinetic parameters (increasing Km, decreasing Kcat/Km, and Vmax) and thermodynamic parameters (increasing enzyme half-life and activation energy). The study's outcomes represent a significant advancement in the realm of enzyme synthesis and its stabilization using several combined technologies, including enzyme production with recombinant DNA technology based on gene synthesis, and its stabilization using a hybrid substrate synthesized from nanomaterials. Based on these findings, the immobilized recombinant enzyme has high potential for industrial use as an efficient and stable biocatalyst.

Systematic characterisation, and effect of nutritional and physical parameters on culturability, laccase production and dye decolorisation potential by P. pistillaris from Pakistan

Podaxis pistillaris is neutraceutically, cosmoceutically and medicinally recognised macrofungus. During this research work, this edible mushroom was systematically characterised. Its culturability, laccase production, and dye decolorisation potential were evaluated and optimised. Among the different media tested, PDA proved as most efficient medium for culturability of P. pistillaris. Conditions for laccase production were optimised in submerged state fermentation. Maximum laccase secretion was noted after 14th day of Incubation at 35 °C with 130 rpm and 5 pH of medium. Fructose and ammonium-phosphate was found as best carbon and nitrogen source, while wheat straw revealed as good ligno-cellulosic source for strengthening laccase production. Congo-red dye decolorisation capability by crude laccase enzyme was evaluated and found maximum decolorisation potential (92.2%) after 288h of incubation. From this pilot study, it was confirmed that this edible macrofungus has culturability, laccase production and dye decolorisation attributes that will further contribute in delignification, biosorption and bioremediation.

Propitious catalytic response of immobilized α-amylase from G. thermoleovorans in modified APTES-Fe3O4 NPs for industrial bio-processing

Challenges in enzyme and product recovery are currently intriguing in modern biotechnology. Coping enzyme stability, shelf life and efficiency, nanomaterials-based immobilization were epitomized of industrial practice. Herein, a α-amylase from Geobacillus thermoleovorans was purified and bound effectively on to a modified 3-Aminopropyltriethoxysilane (APTES)-Fe3O4 nanoparticle. It was revealed that the carrier-bound enzyme catalysis (pH 8 and 60 °C) was significant in contrast to the free enzyme (pH 7.5 and 55 °C). Furthermore, Zn2+ and Cu2+ were shown to cause inhibitory effects in both enzyme states. Unlike chloroform, toluene, benzene, and butanol, minimal effects were observed with ethanol, acetone, and hexane. The bound enzyme retained 27.4 % of its initial activity after being stored for 36 days. In addition, the reusability of the bound enzyme showed a gradual decline in activity after the first cycle; however, after 13 cycles, its residual activity at 53 % was observed. These data proved significant enough to use this enzyme for industrial starch and analogous substrate bio-processing.

Laccase immobilization and its degradation of emerging pollutants: A comprehensive review

The chronic lack of effective disposal of pollutants has resulted in the detection of a wide variety of EPs in the environment, with concentrations high enough to affect ecological health. Laccase, as a versatile oxidase capable of catalyzing a wide range of substrates and without producing toxic by-products, is a potential candidate for the biodegradation of pollutants. Immobilization can provide favorable protection for free laccase, improve the stability of laccase in complex environments, and greatly enhance the reusability of laccase, which is significant in reducing the cost of industrial applications. This study introduces the properties of laccase and subsequently elaborate on the different support materials for laccase immobilization. The research advances in the degradation of EDs, PPCPs, and PAHs by immobilized laccase are then reviewed. This review provides a comprehensive understanding of laccase immobilization, as well as the advantages of various support materials, facilitating the development of more economical and efficient immobilization systems that can be put into practice to achieve the green degradation of EPs.

Graphene oxide dispersed mesoporous ZIF-8-encapsulated laccase for removal of toluidine blue with multiple enhanced stability

The extensive use and discharge of toluidine blue have caused serious problems to the water environment. As a green biocatalyst, laccase has the ability to decolorize the dyes, but it is limited by poor reusability and low stability. Metal-organic frameworks (MOFs) are a good platform for enzyme immobilization. However, due to the weak dispersion of MOFs, the enzyme activity is inevitably inhibited. Herein, we proposed to use graphene oxide (GO) as the dispersion medium of mesoporous ZIF-8 to construct MZIF-8/GO bi-carrier for laccase (FL) immobilization. On account of the narrower bandgap energy of FL@MZIF-8/GO (4.07 eV) than that of FL@MZIF-8 (4.69 eV), electron transport was enhanced which later increased the catalytic activity of the immobilized enzyme. Meanwhile, the improved hydrophilicity characterized by contact angle and full infiltration time further promoted the efficiency of the enzymatic reaction. Benefiting from such regulatory effects of GO, the composite showed excellent storage stability and reusability, as well as multifaceted enhancements including pH, thermal, and solvent adaptation. On the basis of the characterized synergistic effect of adsorption and degradation, FL@MZIF-8/GO was successfully applied to the degradation of toluidine blue (TB) with a removal rate of 94.8%. Even in actual treated wastewater, the highest removal rate still reached more than 80%. Based on the inner mechanism analysis and the universality study, this material is expected to be widely used in the degradation of pollutants in real water under complex environmental conditions.

Laccase immobilized on nanocomposites for wastewater pollutants degradation: current status and future prospects

The bio-enzyme degradation technology is a promising approach to sustainably remove pollution in the water and laccase is one of the most widely used enzymes in this area. Nevertheless, the further industrial application of laccase is limited by low stability, short service, low reusability and high price. The immobilization technology can significantly improve the stability and reusability of enzymes and thus promoting their industrial applications. Nanocomposite materials have been developed and applied in the efficient immobilization of laccase due to their superior physical, chemical, and biological performance. This paper presents a comprehensive review of various nanocomposite immobilization methods for laccase and the consequent changes in enzymatic properties post-immobilization. Additionally, a comprehensive analysis is conducted on the factors that impact laccase immobilization and its water removal efficiency. Furthermore, this review examines the effectiveness of common contaminants' removal mechanisms while summarizing and discussing issues related to laccase immobilization on nanocomposite carriers. This review aims to provide valuable guidance for enhancing laccase immobilization efficiency and enzymatic water pollutant removal.

Applications and immobilization strategies of the copper-centred laccase enzyme; a review

Laccase is a multi-copper enzyme widely expressed in fungi, higher plants, and bacteria which facilitates the direct reduction of molecular oxygen to water (without hydrogen peroxide production) accompanied by the oxidation of an electron donor. Laccase has attracted attention in biotechnological applications due to its non-specificity and use of molecular oxygen as secondary substrate. This review discusses different applications of laccase in various sectors of food, paper and pulp, waste water treatment, pharmaceuticals, sensors, and fuel cells. Despite the many advantages of laccase, challenges such as high cost due to its non-reusability, instability in harsh environmental conditions, and proteolysis are often encountered in its application. One of the approaches used to minimize these challenges is immobilization. The various methods used to immobilize laccase and the different supports used are further extensively discussed in this review.

Biocatalytic potential of Brassica oleracea L. var. botrytis leaves peroxidase for efficient degradation of textile dyes in aqueous medium

Dye-contaminated wastewater discharge from textile and dye manufacturing industries is reported as a world worse water polluter due to the toxic and mutagenic behavior of dyes. Peroxidase, one of the key enzymes of oxidoreductases, is widely distributed in nature and has been currently exploited in industries for various applications. Widespread applications of peroxidases are associated with their nonspecific nature towards a wide spectrum of substrates such as phenols, aromatic amines, pesticides, antibiotics, and synthetic dyes. The present study explored the potential of ammonium sulfate precipitated partially purified Brassica oleracea L. var. botrytis leaves peroxidase for degradation of reactive textile dyes Remazol Turquoise Blue 133 G and Drim Red CL4BN. Various physico-chemical parameters such as pH (2-9), temperature (20-70 ℃), enzyme activity (3-24 U/mL), concentrations of H₂O₂ (0.4-1.4 Mm) and dye (10-100 mg/L) were optimized for enzymatic decolorization of both dyes' solution. Studies revealed that maximum degradation (95%) of Remazol Turquoise Blue 133 G with peroxidase was achieved with 25 mg/L of initial dye concentration, in the presence of 0.8 mM hydrogen peroxide with 45 min of incubation time, at pH 3, 4, and 5, and 70 °C. Maximal decolorization (97%) of Drim Red CL4BN was obtained at pH 2.0, in 10 min of incubation time at 45 ℃ using o-dianisidine hydrochloride as a redox mediator. In conclusion, the findings illustrate the prospect of Brassica oleracea peroxidase to remediate dye pollutants and dye-based industrial effluents in a green technology theme.

Bioengineered magnetic graphene oxide microcomposites for bioremediation of chromium in ex situ - A novel strategy for aggrandized recovery by electromagnetic gadgetry

Novel magnetic microcomposites consisting of graphene oxide and iron oxide was synthesized to immobilize metabolically versatile Paracoccus sp. MKU1 and Leucobacter sp. AA7 and tested for the simultaneous adsorption and enhanced biological detoxification of hexavalent chromium (Cr(VI)) from tannery wastewater. This study reports highest chromium adsorption of 272.6 mg/g and 179.3 mg/g with complete reduction of Cr(VI) to Cr(III) by the microcomposites of AA7 and MKU1 from wastewater in a bioreactor (10 L) at large-scale for first time in ex situ. Furthermore, both the microcomposites displayed an enhanced detoxification of tannery wastewater by reducing various physicochemical conditions such as ammonia, nitrate, TDS, fluoride, CaCO_3, Ca, Mg, NO₃ and SO₂ under the permissible limits. Use of electromagnetic device for magnetic microcomposites recovery from bioreactor yielded a maximum of 88% and 80.6% recovery for AA7 and MKU1, respectively. The rate of chromium recuperation achieved following desorption from the microcomposites of AA7 and MKU1 was 90.71% and 93.97%, respectively. Thus, the multifarious benefits including adsorption, metabolic detoxification, recovery, and recuperation by single functional microcomposites seems to be an intriguing and profitable approach for practicing in real-time operations to effectively remove heavy metals from the contaminated wastewater for environmental protection.

Graphene Oxide (GO) Materials-Applications and Toxicity on Living Organisms and Environment

Graphene-based materials have attracted much attention due to their fascinating properties such as hydrophilicity, high dispersion in aqueous media, robust size, high biocompatibility, and surface functionalization ability due to the presence of functional groups and interactions with biomolecules such as proteins and nucleic acid. Modified methods were developed for safe, direct, inexpensive, and eco-friendly synthesis. However, toxicity to the environment and animal health has been reported, raising concerns about their utilization. This review focuses primarily on the synthesis methods of graphene-based materials already developed and the unique properties that make them so interesting for different applications. Different applications are presented and discussed with particular emphasis on biological fields. Furthermore, antimicrobial potential and the factors that affect this activity are reviewed. Finally, questions related to toxicity to the environment and living organisms are revised by highlighting factors that may interfere with it.

Improved stability and promoted activity of laccase by One-Pot encapsulation with Cu (PABA) nanoarchitectonics and its application for removal of Azo dyes

Immobilization of laccase helps protect the laccase and realizes repeated use. However, excessive encapsulation protection will also limit the release of laccase activity. This work introduces an effective one-pot method encapsulating laccase in the porous material of metal organic framework (MOF) containing specific metal ions, which provided a new way to solve the problem of limited laccase activity. The immobilization process was mathematically modeled. The morphological and encapsulated properties of the prepared materials were confirmed by the characterization results of SEM, FTIR, XRD, TGA, XPS and CLSM. The results showed that laccase was successfully encapsulated, and the Cu (PABA) with Cu2+ as the central structure promoted the laccase activity, the activity of immobilized laccase increased by 1.7 times. The prepared laccase@Cu (PABA) (Lac@Cu (PABA)) showed enhanced stability to extreme pH, high temperature and storage time. More importantly, the Lac@Cu (PABA) exhibited superior reusability, maintaining 70% removal rate of Direct Red 31 (DR31) even after 10 cycles. The dye removal rate of immobilized laccase reached 92% in 6 h under optimal conditions. This research improved the stability of laccase while releasing the activity of laccase, which not only broadened the applicable environment of laccase, but also increased the rate of degradation, and provided a new idea for the clean and efficient treatment of water pollution in textile industry.

Magnetic Solid-Phase Extraction Based on Magnetic Sulfonated Reduced Graphene Oxide for HPLC-MS/MS Analysis of Illegal Basic Dyes in Foods

In this study, a magnetic solid-phase extraction (MSPE) method coupled with High-Performance Liquid Chromatography Mass Spectrometry (HPLC–MS/MS) for the determination of illegal basic dyes in food samples was developed and validated. This method was based on Magnetic sulfonated reduced graphene oxide (M-S-RGO), which was sensitive and selective to analytes with structure of multiaromatic rings and negatively charged ions. Several factors affecting MSPE efficiency such as pH and adsorption time were optimized. Under the optimum conditions, the calibration curves exhibited good linearity, ranging from 5 to 60 µg/g with correlation coefficients >0.9950. The limits of detection of 16 basic dyes were in the range of 0.01–0.2 µg/L. The recoveries ranged from 70% to 110% with RSD% < 10%. The results indicate that M-S-RGO is an efficient and selective adsorbent for the extraction and cleanup of basic dyes. Due to the MSPE procedures, matrix effect and interference were eliminated in the analysis of HPLC–MS/MS without the matrix-matched standards. Thus, validation data showed that the proposed MSPE–HPLC–MS/MS method was rapid, efficient, selective, and sensitive for the determination of illegal basic dyes in foods.

Recent Developments in the Immobilization of Laccase on Carbonaceous Supports for Environmental Applications - A Critical Review

Τhe ligninolytic enzyme laccase has proved its potential for environmental applications. However, there is no documented industrial application of free laccase due to low stability, poor reusability, and high costs. Immobilization has been considered as a powerful technique to enhance laccase's industrial potential. In this technology, appropriate support selection for laccase immobilization is a crucial step since the support could broadly affect the properties of the resulting catalyst system. Through the last decades, a large variety of inorganic, organic, and composite materials have been used in laccase immobilization. Among them, carbon-based materials have been explored as a support candidate for immobilization, due to their properties such as high porosity, high surface area, the existence of functional groups, and their highly aromatic structure. Carbon-based materials have also been used in culture media as supports, sources of nutrients, and inducers, for laccase production. This study aims to review the recent trends in laccase production, immobilization techniques, and essential support properties for enzyme immobilization. More specifically, this review analyzes and presents the significant benefits of carbon-based materials for their key role in laccase production and immobilization.

An Electrochemical Sensor Based on Amino Magnetic Nanoparticle-Decorated Graphene for Detection of Cannabidiol

For detection of cannabidiol (CBD)—an important ingredient in Cannabis sativa L.—amino magnetic nanoparticle-decorated graphene (Fe₃O₄-NH₂-GN) was prepared in the form of nanocomposites, and then modified on a glassy carbon electrode (GCE), resulting in a novel electrochemical sensor (Fe₃O₄-NH₂-GN/GCE). The applied Fe₃O₄-NH₂ nanoparticles and GN exhibited typical structures and intended surface groups through characterizations via transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray powder diffraction (XRD), vibrating sample magnetometer (VSM), and Raman spectroscopy. The Fe₃O₄-NH₂-GN/GCE showed the maximum electrochemical signal for CBD during the comparison of fabricated components via the cyclic voltammetry method, and was systematically investigated in the composition and treatment of components, pH, scan rate, and quantitative analysis ability. Under optimal conditions, the Fe₃O₄-NH₂-GN/GCE exhibited a good detection limit (0.04 μmol L⁻¹) with a linear range of 0.1 μmol L⁻¹ to 100 μmol L⁻¹ (r² = 0.984). In the detection of CBD in the extract of C. sativa leaves, the results of the electrochemical method using the Fe₃O₄-NH₂-GN/GCE were in good agreement with those of the HPLC method. Based on these findings, the proposed sensor could be further developed for the portable and rapid detection of natural active compounds in the food, agricultural, and pharmaceutical fields.

Thermodynamics, kinetics and optimization of catalytic behavior of polyacrylamide-entrapped carboxymethyl cellulase (CMCase) for prospective industrial use

In the current study, kinetic and thermodynamic parameters of free and polyacrylamide-immobilized CMCase were analyzed. The maximum immobilization yield of 34 ± 1.7% was achieved at 11% acrylamide. The enthalpy of activation (ΔH) of free and immobilized enzyme was found to be 13.61 and 0.29 kJ mol^-1, respectively. Irreversible inactivation energy of free and immobilized CMCase was 96.43 and 99.01 kJ mol^-1, respectively. Similarly, the enthalpy of deactivation (ΔH_d) values for free and immobilized enzyme were found to be in the range of 93.51-93.76 kJ mol^-1 and 96.08-96.33 kJ mol^-1, respectively. Michaelis-Menten constant (K_m) increased from 1.267 ± 0.06 to 1.5891 ± 0.07 mg ml^-1 and the maximum reaction rate (V_max) value decreased (8319.47 ± 416 to 5643.34 ± 282 U ml^-1 min^-1) after immobilization. Due to wide pH and temperature stability profile with sufficient reusing efficiency up to three successive cycles, the immobilized CMCase might be useful for various industrial processes.

A comprehensive insight into the application of white rot fungi and their lignocellulolytic enzymes in the removal of organic pollutants

Environmental problems resultant from organic pollutants are a major current challenge for modern societies. White rot fungi (WRF) are well known for their extensive organic compound degradation abilities. The unique oxidative and extracellular ligninolytic systems of WRF that exhibit low substrate specificity, enable them to display a considerable ability to transform or degrade different environmental contaminants. In recent decades, WRF and their ligninolytic enzymes have been widely applied in the removal of polycyclic aromatic hydrocarbons (PAHs), pharmaceutically active compounds (PhACs), endocrine disruptor compounds (EDCs), pesticides, synthetic dyes, and other environmental pollutants, wherein promising results have been achieved. This review focuses on advances in WRF-based bioremediation of organic pollutants over the last 10 years. We comprehensively document the application of WRF and their lignocellulolytic enzymes for removing organic pollutants. Moreover, potential problems and intriguing observations that are worthy of additional research attention are highlighted. Lastly, we discuss trends in WRF-remediation system development and avenues that should be considered to advance research in the field.

Immobilization of lipase by dialdehyde cellulose crosslinked magnetic nanoparticles

Cellulose microcrystalline (MCC) was widely used in pharmaceutical and chemical industries because of its low degree of polymerization and large specific surface area. As its modified form, dialdehyde cellulose (DAC) was used for cross-linking and immobilizing Rhizopus lipase together with magnetic nanoparticles (MNPs) due to its active aldehyde groups. In this study, in order to maintain the original enzyme activity as much as possible and improve the stability of lipase, the Rhizopus lipase was successfully immobilized on the magnetic dialdehyde cellulose nanoparticles (MDC). Specifically, the immobilization conditions including dosage of DAC, concentration of enzyme, immobilization time and temperature together with pH value of the reaction medium were optimized. Maximum immobilization yield (60.03 ± 0.49%) and recovery activity (88.88 ± 0.61%) can be obtained under the optimal process conditions. The changes in secondary structures of immobilized enzyme revealed the increment in conformational rigidity, which can be reflected in temperature and pH stability as well as tolerance of organic reagents. Additionally, the recovery activity of immobilized enzyme still reached 50.60 ± 0.59% after 30 d of storage and 52.10 ± 0.57% retained after 6 cycles. These results indicated the ideal application prospect of MDC in immobilized enzymes.

Trends in the development of innovative nanobiocatalysts and their application in biocatalytic transformations

The ever-growing demand for cost-effective and innocuous biocatalytic transformations has prompted the rational design and development of robust biocatalytic tools. Enzyme immobilization technology lies in the formation of cooperative interactions between the tailored surface of the support and the enzyme of choice, which result in the fabrication of tremendous biocatalytic tools with desirable properties, complying with the current demands even on an industrial level. Different nanoscale materials (organic, inorganic, and green) have attracted great attention as immobilization matrices for single or multi-enzymatic systems. Aiming to unveil the potentialities of nanobiocatalytic systems, we present distinct immobilization strategies and give a thorough insight into the effect of nanosupports specific properties on the biocatalysts' structure and catalytic performance. We also highlight the development of nanobiocatalysts for their incorporation in cascade enzymatic processes and various types of batch and continuous-flow reactor systems. Remarkable emphasis is given on the application of such nanobiocatalytic tools in several biocatalytic transformations including bioremediation processes, biofuel production, and synthesis of bioactive compounds and fine chemicals for the food and pharmaceutical industry.

Rapid screening of lipase inhibitors in licorice extract by using porcine pancreatic lipase immobilized on Fe3O4 magnetic nanoparticles

Chalcones, a class of natural lipase inhibitors, have received substantial attention from researchers in recent years. Although many kinds of chalcones are typically distributed in G. inflata, there is little literature about the anti-lipase activity of G. inflata extracts (GIEs). In the present study, a ligand fishing strategy for fast screening of lipase inhibitors from GIEs was thus proposed. Porcine pancreatic lipase (PPL) was firstly immobilized on carboxyl modified Fe3O4 magnetic nanoparticles (MNPs) to obtain PPL functionalized MNPs (PPL@MNPs), and then the PPL@MNPs were incubated with a bioactive fraction to fish out the ligands. Eight ligands were obtained and identified as one flavone together with seven chalcones. Licochalcone A, licochalcone D and licochalcone E inhibited pancreatic lipase (PL) with IC50 of 4.9, 3.2 and 5.8 μM, respectively. Meanwhile, investigation of the structure-activity relationship also revealed that isopentenyl and hydroxyl substituents at ring A were essential for the noncovalent inhibitory potency of the chalcones.

Harnessing the biocatalytic attributes and applied perspectives of nanoengineered laccases-A review

In the recent past, numerous new types of nanostructured carriers, as support matrices, have been engineered to advance the traditional enzyme immobilization strategies. The current research aimed to develop a robust enzyme-based biocatalytic platform and its effective deployment in the industrial biotechnology sectors at large and catalysis area, in particular, as low-cost biocatalytic systems. Suitable coordination between the target enzyme molecules and surface pendent multifunctional entities of nanostructured carriers has led an effective and significant contribution in myriad novel industrial, biotechnological, and biomedical applications. As compared to the immobilization on planar two-dimensional (2-D) surface, the unique physicochemical, structural and functional attributes of nano-engineered matrices, such as high surface-to-volume ratio, surface area, robust chemical and mechanical stability, surface pendant functional groups, outstanding optical, thermal, and electrical characteristics, resulted in the concentration of the immobilized entity being substantially higher, which is highly requisite from applied bio-catalysis perspective. Besides inherited features, nanostructured materials-based enzyme immobilization aided additional features, such as (1) ease in the preparation or green synthesis route, (2) no or minimal use of surfactants and harsh reagents, (3) homogeneous and well-defined core-shell nanostructures with thick enzyme shell, and (4) nano-size can be conveniently tailored within utility limits, as compared to the conventional enzyme immobilization. Moreover, the growing catalytic needs can be fulfilled by multi-enzymes co-immobilization on these nanostructured materials-based support matrices. This review spotlights the unique structural and functional attributes of several nanostructured materials, including carbon nanotubes, graphene, and its derivate constructs, nanoparticles, nanoflowers, and metal-organic frameworks as robust matrices for laccase immobilization. The later half of the review focuses on the applied perspective of immobilized laccases for the degradation of emergent contaminants, biosensing cues, and lignin deconstruction and high-value products.

Recent Strategies and Applications for l-Asparaginase Confinement

l-asparaginase (ASNase, EC 3.5.1.1) is an aminohydrolase enzyme with important uses in the therapeutic/pharmaceutical and food industries. Its main applications are as an anticancer drug, mostly for acute lymphoblastic leukaemia (ALL) treatment, and in acrylamide reduction when starch-rich foods are cooked at temperatures above 100 °C. Its use as a biosensor for asparagine in both industries has also been reported. However, there are certain challenges associated with ASNase applications. Depending on the ASNase source, the major challenges of its pharmaceutical application are the hypersensitivity reactions that it causes in ALL patients and its short half-life and fast plasma clearance in the blood system by native proteases. In addition, ASNase is generally unstable and it is a thermolabile enzyme, which also hinders its application in the food sector. These drawbacks have been overcome by the ASNase confinement in different (nano)materials through distinct techniques, such as physical adsorption, covalent attachment and entrapment. Overall, this review describes the most recent strategies reported for ASNase confinement in numerous (nano)materials, highlighting its improved properties, especially specificity, half-life enhancement and thermal and operational stability improvement, allowing its reuse, increased proteolysis resistance and immunogenicity elimination. The most recent applications of confined ASNase in nanomaterials are reviewed for the first time, simultaneously providing prospects in the described fields of application.

Hydroxyapatite-decorated ZrO2 for α-amylase immobilization: Toward the enhancement of enzyme stability and reusability

Herein, the immobilization of α-amylase onto hydroxyapatite (HA) and hydroxyapatite-decorated ZrO₂ (10%wt) (HA-ZrO₂) nanocomposite were investigated. The immobilization yield was 69.7% and 84% respectively. The structural differences were characterized using X-Ray diffraction, attenuated total reflectance-Fourier transform infrared spectra, Raman, and scanning electron microscope. After 10 repeated cycles, the residual activity of immobilized α-amylase onto HA and HA-ZrO₂ nanocomposite was 46% and 70%, respectively. The storage stability was recorded to be 27%, 50% and 69% from its initial activity in the case of free and immobilized enzyme onto HA and HA-ZrO₂ nanocomposite, respectively after 8 weeks. The pH-activity profile and temperature revealed pH 6.0 and temperature 50 °C as the optimal values of free α-amylase, while the optimum values for α-amylase on HA and HA-ZrO₂ was shifted to pH 6.5 and 60 °C after immobilization. The immobilized α-amylase onto HA-ZrO₂ showed comparatively higher catalytic activity than the free α-amylase. The Km value after the immobilization process onto HA was 2.1 folds highly than that of the free enzyme. In conclusion, it can be inferred that HA-ZrO₂ is more sustainable and beneficial support for enzyme immobilization and it represents promising supports for different uses of α-amylase in the biomedical applications.

Improved performance of immobilized laccase on Fe3O4@C-Cu2+ nanoparticles and its application for biodegradation of dyes

An effective strategy for enhancement of catalytic activity and stability of immobilized laccase via metal affinity adsorption on Fe₃O₄@C-Cu²⁺ nanoparticles was developed, which involved the fabrication of hydroxyl and carboxyl functionalized Fe₃O₄@C nanoparticles via a simple hydrothermal process and the subsequent chelation with Cu²⁺ for the immobilization of laccase under a mild condition. Our results revealed that the Fe₃O₄@C-Cu²⁺ nanoparticles possess a high loading amount of bovine serum albumin (BSA, 436 mg/g support) and laccase activity recovery of 82.3 % after immobilization. Laccase activity assays indicated that thermal and pH stabilities, and resistances to organic solvents and metal ions of the immobilized laccase were relatively higher than those of the free enzyme. The immobilized laccase maintained more than 61 % of its original activity after 10 consecutive reuses. Most importantly, the immobilized laccase possessed excellent degradation of diverse synthetic dyes. The degradation rates of malachite green (MG), brilliant green (BG), crystal violet (CV), azophloxine, Procion red MX-5B, and reactive blue 19 (RB19) was approximately 99, 93, 79, 88, 75 and 81 (%) in the first cycle. Even after 10 consecutive reuses, the removal efficiencies of the six dyes were found to be 94, 80, 71, 78, 60, and 65 (%), respectively.

Magnetic nanoparticles encapsulated laccase nanoflowers: evaluation of enzymatic activity and reusability for degradation of malachite green

Magnetic laccase nanoflowers (MNFs-Lac) were successfully prepared through encapsulating Fe₃O₄ magnetic nanoparticles into the interior of laccase nanoflowers by grafting N-(phosphonomethyl)iminodiacetic acid (PMIDA) as an interconnecting bridge between the magnetic nanoparticles and copper ions. The characterizations by scanning electron microscopy and transmission electron microscopy showed that MNFs-Lac were spherical, porous and flower-like crystals with diameters of ∼10 μm, and Fe₃O₄ nanoparticles were encapsulated in the interior of MNFs-Lac evenly. The enzymatic activity and reusability of MNFs-Lac were evaluated based on the degradation efficiency for malachite green (MG). The degradation parameters, concerning initial MG concentration, dosage of MNFs-Lac, reaction temperature, pH value and reaction time, were optimized through single-factor experiments. Under the optimal conditions, 25 mg·L^-1 MG can be degraded almost completely by 1.5 g·L^-1 MNFs-Lac within 15 min. When the MNFs-Lac were reused for 18 times, the degradation efficiency of MG was still as high as 90%. These results suggested that the modified preparation method improved greatly the reusability of MNFs-Lac, which made them more suitable to degrade MG in a water environment.

Construction of a Robust Cofactor Self-Sufficient Bienzyme Biocatalytic System for Dye Decolorization and its Mathematical Modeling

A triphenylmethane reductase derived from Citrobacter sp. KCTC 18061P was coupled with a glucose 1-dehydrogenase from Bacillus sp. ZJ to construct a cofactor self-sufficient bienzyme biocatalytic system for dye decolorization. Fed-batch experiments showed that the system is robust to maintain its activity after 15 cycles without the addition of any expensive exogenous NADH. Subsequently, three different machine learning approaches, including multiple linear regression (MLR), random forest (RF), and artificial neural network (ANN), were employed to explore the response of decolorization efficiency to the variables of the bienzyme system. Statistical parameters of these models suggested that a three-layered ANN model with six hidden neurons was capable of predicting the dye decolorization efficiency with the best accuracy, compared with the models constructed by MLR and RF. Weights analysis of the ANN model showed that the ratio between two enzymes appeared to be the most influential factor, with a relative importance of 54.99% during the decolorization process. The modeling results confirmed that the neural networks could effectively reproduce experimental data and predict the behavior of the decolorization process, especially for complex systems containing multienzymes.

Laccase Immobilized onto Zirconia⁻Silica Hybrid Doped with Cu2+ as an Effective Biocatalytic System for Decolorization of Dyes

Nowadays, novel and advanced methods are being sought to efficiently remove dyes from wastewaters. These compounds, which mainly originate from the textile industry, may adversely affect the aquatic environment as well as living organisms. Thus, in presented study, the synthesized ZrO₂–SiO₂ and Cu²⁺-doped ZrO₂–SiO₂ oxide materials were used for the first time as supports for laccase immobilization, which was carried out for 1 h, at pH 5 and 25 °C. The materials were thoroughly characterized before and after laccase immobilization with respect to electrokinetic stability, parameters of the porous structure, morphology and type of surface functional groups. Additionally, the immobilization yields were defined, which reached 86% and 94% for ZrO₂–SiO₂–laccase and ZrO₂–SiO₂/Cu²⁺–laccase, respectively. Furthermore, the obtained biocatalytic systems were used for enzymatic decolorization of the Remazol Brilliant Blue R (RBBR) dye from model aqueous solutions, under various reaction conditions (time, temperature, pH). The best conditions of the decolorization process (24 h, 30 °C and pH = 4) allowed to achieve the highest decolorization efficiencies of 98% and 90% for ZrO₂–SiO₂–laccase and ZrO₂–SiO₂/Cu²⁺–laccase, respectively. Finally, it was established that the mortality of Artemia salina in solutions after enzymatic decolorization was lower by approx. 20% and 30% for ZrO₂–SiO₂–laccase and ZrO₂–SiO₂/Cu²⁺–laccase, respectively, as compared to the solution before enzymatic treatment, which indicated lower toxicity of the solution. Thus, it should be clearly stated that doping of the oxide support with copper ions positively affects enzyme stability, activity and, in consequence, the removal efficiency of the RBBR dye.

Immobilizing laccase on kaolinite and its application in treatment of malachite green effluent with the coexistence of Cd (П)

Malachite green effluent with the Coexistence of Cd (П) was efficiently decolorized by kaolinite-laccase (Kaolin-Lac). Laccase from Trametes versicolor was immobilized onto the kaolinite through physical adsorption contact. The optimal conditions were 180 min of immobilization time and 0.8 mg/mL of enzyme solution. Kaolin-Lac could obtain a loading efficiency of 88.22%, a loading capacity of 12.25 mg/g, and the highest activity of 839.01 U/g. Moreover, the process of immobilization increased its pH stability and operational stability. Kaolin-Lac retained above 50% of the original activity and nearly 80% decolorization for MG after 5 cycles. In the presence of 3, 5-Dimethoxy-4-hydroxybenzaldehyde (SA), Kaolin-Lac could degrade over 98% of malachite green. The coexistence of Cd (П) was beneficial to the decolorization of malachite green by Kaolin-Lac. The structural and morphological features of kaolinite, Kaolin-Lac and Kaolin-Lac after degradation were determined by scanning electron microscopy-energy spectrum analysis (SEM-EDS) and Fourier transform infrared spectroscopy (FTIR). Cadmium appeared on the Kaolin-Lac after degradation. After immobilization and degradation, the surface groups on kaolinite were changed. Kaolin-Lac showed its more potential continuous employment than free laccase in practical malachite green dyes effluent mixed with Cd (П).

Ionic liquid-based dispersive liquid-liquid microextraction combined with functionalized magnetic nanoparticle solid-phase extraction for determination of industrial dyes in water

N-butyl pyridinium bis((trifluoromethyl)sulfonyl)imide ([Hpy]NTf₂) functionalized core/shell magnetic nanoparticles (MNPs, Fe₃O₄@SiO₂@[Hpy]NTf₂)) were prepared and applied as an adsorbent for magnetic solid phase extraction (MSPE) of three commonly used industrial dyes including malachite green, crystal violet and methylene blue. Extraction solution was mixed with 100 mg extraction material of Fe₃O₄@SiO₂@[Hpy]NTf₂, and 1 mL of acetonitrile was used to elute target analytes for further extraction and purification. [Hpy]NTf₂ was used as extraction solution, and 500 μL methanol was selected as dispersive solvent in ionic liquid (IL) dispersive liquid–liquid microextraction (DLLME) method. After sonication for 5 min and centrifugation at 447 g for 10 min, 20 μL of sedimented phase was injected into HPLC-UV system. The limit of detection (LOD) and limit of quantification (LOQ) of current method were 0.03 and 0.16 μg·L⁻¹, respectively, which indicated the sensitivity was comparable or even superior to other reported methods. The relative recoveries of the target analytes ranged from 86.1% to 100.3% with relative standard deviations between 0.3% and 4.5%. The developed method has been successfully applied to determine the level of three industrial dyes in different water samples.