Electrophilic Selenium Catalysis with Electrophilic N-F Reagents as the Oxidants

Intermolecular Aza-Wacker Coupling of Alkenes with Azoles by Photo-Aerobic Selenium-π-Acid Multicatalysis

Herein, the intermolecular, photoaerobic aza-Wacker coupling of azoles with alkenes by means of dual and ternary selenium-π-acid multicatalysis is presented. The title method permits an expedited avenue toward a broad scope of N-allylated azoles and representative azinones under mild conditions with broad functional group tolerance, as is showcased in more than 60 examples including late-stage drug derivatizations. From a regiochemical perspective, the protocol is complementary to cognate photoredox catalytic olefin aminations, as they typically proceed through either allylic hydrogen atom abstraction or single electron oxidation of the alkene substrate. These methods predominantly result in C-N bond formations at the allylic periphery of the alkene or the less substituted position of the former π-bond (i.e., anti-Markovnikov selectivity). The current process, however, operates through a radical-polar crossover mechanism, which solely affects the selenium catalyst, thus allowing the alkene to be converted strictly through an ionic two-electron transfer regime under Markovnikov control. In addition, it is shown that the corresponding N-vinyl azoles can also be accessed by sequential or one-pot treatment of the allylic azoles with base, thus emphasizing the exquisite utility of this method.

Catalytic 1,1-diazidation of alkenes

Compared to well-developed catalytic 1,2-diazidation of alkenes to produce vicinal diazides, the corresponding catalytic 1,1-diazidation of alkenes to yield geminal diazides has not been realized. Here we report an efficient approach for catalytic 1,1-diazidation of alkenes by redox-active selenium catalysis. Under mild conditions, electron-rich aryl alkenes with Z or E or Z/E mixed configuration can undergo migratory 1,1-diazidation to give a series of functionalized monoalkyl or dialkyl geminal diazides that are difficult to access by other methods. The method is also effective for the construction of polydiazides. The formed diazides are relatively safe by TGA-DSC analysis and impact sensitivity tests, and can be easily converted into various valuable molecules. In addition, interesting reactivity that geminal diazides give valuable molecules via the geminal diazidomethyl moiety as a formal leaving group in the presence of Lewis acid is disclosed. Mechanistic studies revealed that a selenenylation-deselenenylation followed by 1,2-aryl migration process is involved in the reactions, which provides a basis for the design of new reactions.

Asymmetric Synthesis with Organoselenium Compounds - The Past Twelve Years

The discovery and synthetic applications of novel organoselenium compounds and their reactions proceeded rapidly during the past fifty years and such processes are now carried out routinely in many laboratories. At the same time, the growing demand for new enantioselective processes provided new challenges. The convergence of selenium chemistry and asymmetric synthesis led to key developments in the 1970s, although the majority of early work was based on stoichiometric processes. More recently, greater emphasis has been placed on greener catalytic variations, along with the discovery of novel reactions and a deeper understanding of their mechanisms. The present review covers the literature in this field from 2010 to early 2023 and encompasses asymmetric reactions mediated by chiral selenium-based reagents, auxiliaries, and especially, catalysts. Protocols based on achiral selenium compounds in conjunction with other species of chiral catalysts, as well as reactions that are controlled by chiral substrates, are also included.

Iron-Promoted Catalytic Activity of Selenium Endowing the Aerobic Oxidative Cracking Reaction of Alkenes

Oxidative cracking of alkenes is a significant process in industry. In this work, it was found that catalyzed by Se/Fe via hybrid mechanisms, the carbon-carbon double bond in alkenes can break to produce carbonyls under mild conditions. Since O2 can be used as a partial oxidant, the employed H2O2 amount can be reduced (90 mol % vs 250 mol %) to avoid the peroxide residues, making the process even safer for operation.

Regiocontrolled allylic functionalization of internal alkene via selenium-π-acid catalysis guided by boron substitution

The selenium-π-acid-catalysis has received increasing attention as a powerful tool for olefin functionalization, but the regioselectivity is often problematic. Reported herein is a selenium-catalyzed regiocontrolled olefin transpositional chlorination and imidation reaction. The reaction outcome benefits from an allylic B(MIDA) substitution. And the stabilization of α-anion from a hemilabile B(MIDA) moiety was believed to be the key factor for selectivity. Broad substrate scope, good functional group tolerance and generally good yields were observed. The formed products were demonstrated to be valuable precursors for the synthesis of a wide variety of structurally complex organoborons.

Synthesis of 2,5-disubstituted selenophenes via a copper-catalyzed regioselective [2+2+1] cyclization of terminal alkynes and selenium

Herein, a straightforward method for the synthesis of 2,5-disubstituted selenophenes via [2+2+1] cyclization of easily accessible terminal alkynes and elemental selenium has been developed. This reaction features high atom- and step-economy, excellent regioselectivity, good functional group tolerance and the use of stable and non-toxic selenium as a selenium source. A series of control experiments suggests that the reaction might undergo Glaser coupling reaction of two molecules of alkynes, followed by insertion of H₂Se and subsequent cyclization. Moreover, the newly formed products can be further converted to diverse conjugated selenophene-based derivatives, demonstrating their potential applications in organic synthesis and materials science.

Stereoselective Synthesis of Nonpsychotic Natural Cannabidiol and Its Unnatural/Terpenyl/Tail-Modified Analogues

Here, we report a three-step concise and stereoselective synthesis route to one of the most important phytocannabinoids, namely, (-)-cannabidiol (-CBD), from inexpensive and readily available starting material R-(+)-limonene. The synthesis involved the diastereoselective bifunctionalization of limonene, followed by effective elimination leading to the generation of key chiral p-mentha-2,8-dien-1-ol. The chiral p-mentha-2,8-dien-1-ol on coupling with olivetol under silver catalysis provided regiospecific (-)-CBD, contrary to reported ones which gave a mixture. The newly developed approach was further extended to its structural analogues cannabidiorcin and other tail/terpenyl-modified analogues. Moreover, its opposite isomer (+)-cannabidiol was also successfully synthesized from S-(-)-limonene.

PhSe(O)OH/Al(NO3)3-Catalyzed selectivity controllable oxidation of sulphide owing to the synergistic effect of Se, Al3+ and nitrate

Catalyzed by PhSe(O)OH/Al(NO3)3, selective oxidation of sulphides to produce sulfoxides or sulphones could be achieved under mild conditions. The synergistic effect of Se, Al3+ and nitrate is the key factor for the reaction.

Electrochemical oxidative cyclization of alkenes, boronic acids, and dichalcogenides to access chalcogenated boronic esters and 1,3-diols

A sustainable, environmentally benign electrochemical oxidative three-component cyclization of allylic alcohols, boronic acids, and dichalcogenides under metal-free and oxidant-free conditions has been developed.

Highly crystalline K-intercalated Se/C: An easily accessible mesoporous material catalyzing the epoxidation of β-ionone

Highly crystalline K-intercalated Se/C was fabricated by calcining the commercially available methylselenized glucose with KBr being followed by the subsequent water washing. The corrosion of water to KBr led to...

Organoselenium-Catalyzed Asymmetric Cyclopropanations of (E)-Chalcones

We report a new class of chiral tetrahydroselenophene based on (S)-diphenyl(tetrahydroselenophen-2-yl)methanol, which was prepared from (R)-3-(3-bromopropyl)-2,2-diphenyloxirane and sodium selenide. These chiral tetrahydroselenophene-based compounds were used to catalyze asymmetric cyclopropanation reactions; the selenonium ylide intermediates formed from these selenium-containing catalysts and benzyl bromide efficiently react with (E)-chalcones to give various cyclopropanes (27 examples) with excellent enantioselectivities of ≤99% ee and are the first examples of organoselenium-catalyzed asymmetric cyclopropanations.

Meyer-Schuster-Type Rearrangement of Propargylic Alcohols into α-Selenoenals and -enones with Diselenides

We describe a mild and broadly applicable protocol for the preparation of a diverse array of multisubstituted α-selenoenals and -enones from readily accessible propargylic alcohols and diselenides. The transformation proceeds via the Selectfluor-promoted selenirenium pathway, which enables selenenylation/rearrangement of a variety of propargylic alcohols. Gram-scale experiments showed the potential of this synergistic protocol for practical application.

Iodide-Catalyzed Selenium-Assisted Sequential Multicomponent Synthesis of a Luminescence Benzo-Oxazino-Isoindole Framework

We have described an unexpected pathway using the R-NC/Se system for the synthesis of the unreported benzo-oxazino-isoindole framework by the iodide-catalyzed selenium-assisted sequential multicomponent reaction of the Knoevenagel adduct of ninhydrin and malononitrile, isocyanide, amine, and elemental selenium under mild reaction conditions. The photophysical properties of the products were investigated by absorption and emission spectroscopy, revealing that the new heterocyclic system has good fluorescence properties.

Transition Metal-Free Synthesis of Carbo- and Heterocycles via Reaction of Alkynes with Organylchalcogenides

This manuscript intends to overview the most recent advances in the synthesis of carbo- and heterocycles through reactions of alkynes with organyl chalcogenides (S, Se, Te) under metal-free conditions. Firstly, the use of electrophilic chalcogenyl halides as a selective reagent for alkyne carbon-carbon triple bond activation will be presented. After that, radical cyclization protocols employing electrochemical oxidative conditions, light-induced photoredox catalysis, or mild oxidants with direct chalcogenyl group installation will be discussed accompanied by the proposed mechanisms.

Synergetic catalysis of Se and Cu allowing diethoxylation of halomethylene ketones using O2 as the mild oxidant

Catalyzed by PhSe(O)OH/Cu(OAc)₂, sp³-C–H alkylation of bromomethylene ketones produced useful α-carbonyl acetals under mild conditions. Bromo-containing substrates could release HBr during the reaction, avoiding the use of acidic additives.

Catalytic epoxidation of β-ionone with molecular oxygen using selenium-doped silica materials

Se-doped silica could catalyze the β-ionone epoxidation reaction. Interestingly, by doping with fluorine in the catalyst, the reaction selectivity was significantly enhanced. The metal-free process is suitable for pharmaceutical synthesis.

Synthesis of 3-selanylbenzo[b]furans promoted by SelectFluor®

A simple and practical protocol for the synthesis of 3-selanyl-benzo[b]furans mediated by the SelectFluor® reagent was developed. This novel methodology provided a greener alternative to generate 3-substituted-benzo[b]furans via a metal-free procedure under mild conditions. The intramolecular cyclization reaction was carried out employing an electrophilic selenium species generated in situ through the reaction between SelectFluor® and organic diselenides. The formation of this electrophilic selenium species (RSe-F) was confirmed by heteronuclear NMR spectroscopy, and its reactivity was explored.

Selenium-catalyzed oxidation of alkenes: insight into the mechanisms and developing trend

Recent progresses of the selenium-catalyzed oxidation of alkenes are summarized at the mechanism level. It may be beneficial for designing novel selenium-containing catalysts and alkene oxidation protocols for the next phase of studies.

An organoselenium-catalyzed N1- and N2-selective aza-Wacker reaction of alkenes with benzotriazoles

A novel and practical organoselenium-catalyzed, N¹- and N²-selective controllable aza-Wacker reaction is realized, which provides an easy access to N¹- and N²-olefinated benzotriazole derivatives.

Organotellurium catalysis-enabled utilization of molecular oxygen as oxidant for oxidative deoximation reactions under solvent-free conditions

Catalyzed by commercially available (PhTe)₂, molecular oxygen could be utilized as the mild, cheap and safe oxidant for oxidative deoximation reactions under solvent-free conditions. As the first report on organotellurium-catalyzed deoximation reaction, this work not only provides an efficient deoximation method, but also discloses new features of tellurium catalyst different from those of the organoselenium catalysts.

Recent progress in selenium-catalyzed organic reactions

Selenium-based catalysts, including organo- and inorganoselenium ones, in organic synthesis in the recent decade are reviewed.

Organoselenium small molecules as catalysts for the oxidative functionalization of organic molecules

This perspective highlights the critical analysis of the challenges, in the past decade, which led to the development of organoselenium compounds and their use as versatile catalysts in organic synthesis towards the oxidation of olefins and C–H bonds. Furthermore, the emphasis here differs from previous reviews of the field by classifying the various types of catalyses and the diverse strategies.

Oxidative selenofunctionalization of allenes: convenient access to 2-(phenylselanyl)-but-2-enals and 4-oxo-3-(phenylselanyl)pent-2-enoates

The controlled preparation of two types of α-seleno-α,β-unsaturated carbonyls, namely, α-selenoenals and α-selenoenones, have been accomplished.