Preparation and Characterization of α-Zinc Molybdate Catalyst: Efficient Sorbent for Methylene Blue and Reduction of 3-Nitrophenol

Palladium nanoparticles supported on ionic liquid and glucosamine-modified magnetic iron oxide as a catalyst in reduction reactions

A magnetic nanocomposite comprising imidazolium ionic liquid and glucosamine is successfully synthesized and used for stabilization of Pd nanoparticles. This new material, Fe₃O₄@SiO₂@IL/GA-Pd, is fully characterized and applied as a catalyst in the reduction of nitroaromatic compounds to desired amines at room temperature. Also, the reductive degradation of organic dyes such as methylene blue (MB), methyl orange (MO), and rhodamine B (RhB) is studied and compared with another previous publications. The survey of the stabilization of the palladium catalytic entities is described demonstrating the separation ability and recycling of them. In addition, TEM, XRD, and VSM analyses of the recycled catalyst confirmed its stability.

Novel biogenic gold nanoparticles stabilized on poly(styrene-co-maleic anhydride) as an effective material for reduction of nitrophenols and colorimetric detection of Pb(II)

Biogenic gold nanoparticles (AuNPs) have been extensively studied for the catalytic conversion of nitrophenols (NP) into aminophenols and the colorimetric quantification of heavy metal ions in aqueous solutions. However, the high self-agglomeration ability of colloidal nanoparticles is one of the major obstacles hindering their application. In the present study, we offered novel biogenic AuNPs synthesized by a green approach using Cistanche deserticola (CD) extract as a bioreducing agent and stabilized on poly(styrene-co-maleic anhydride) (PSMA). The prepared Au@PSMA nanoparticles were characterized by various techniques (HR-TEM, SEAD, FE-SEM, DLS, TGA, XRD, and FTIR) and studied for two applications: the catalytic reduction of 3-NP by NaBH₄ and the sensing detection of Pb²⁺ ions. The optimal conditions for the synthesis of AuNPs were investigated and established at 60 °C, 20 min, pH of 9, and 0.5 mM Au³⁺. Morphological studies showed that AuNPs synthesized by CD extract were mostly spherical with a mean diameter of 25 nm, while the size of polymer-integrated AuNPs was more than two-fold larger. Since PSMA acted as a matrix keeping the nanoparticles from coagulation and maintaining the optimal surface area, AuNPs integrated with PSMA showed higher catalytic efficiency with a faster reaction rate and lower activation energy than conventional nanoparticles. Au@PSMA could completely reduce 3-NP within 10 min with a rate constant of 0.127 min^-1 and activation energy of 9.96 kJ/mol. The presence of PSMA also improved the stability and recyclability of AuNPs. Used as a sensor, Au@PSMA exhibited excellent sensitivity and selectivity for Pb²⁺ ions with a limit of detection of 0.03 μM in the linear range of 0-100 μM. The study results suggested that Au@PSMA could be used as a promising catalyst for the reduction of NP and the colorimetric sensor for detection of Pb²⁺ ions in aqueous environmental samples.

Visible light photodegradation of organic dyes using electrochemically synthesized MoO3/ZnO

In this study, flake-like MoO₃-ZnO composite was prepared using a simple and robust electrochemical setup. The composite was characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, elemental analysis, X-ray photoelectron spectroscopy, thermogravimetric analysis, photoluminescence, zeta potential analysis, and electrochemical impedance study. The modified ZnO shows a remarkable catalytic activity towards the photodegradation of three potentially hazardous dyes, malachite green, crystal violet, and methylene blue. More than 95% of both malachite green and crystal violet degraded within 140 min under visible light irradiation. Scavenger studies reveal that OH· radicals produced by the photo-separated charges on MoO₃-ZnO are responsible for the degradation of all three dyes. The photoactive charge carriers show less recombination rate as evidenced by the photoluminescence spectrum due to the interparticle charge migration process. This work suggests a new versatile procedure for the synthesis of MoO₃-ZnO composites and establishes its photocatalytic efficacy under visible light with three common pollutant dyes found in wastewater.

Nanomolar level detection of non-steroidal antiandrogen drug flutamide based on ZnMn2O4 nanoparticles decorated porous reduced graphene oxide nanocomposite electrode

Flutamide is a non-steroidal antiandrogen drug and widely used in the treatment of prostatic carcinoma. Nevertheless, the excessive intake and improper disposal could affect the living organisms. In this work, we have synthesized a new nanocomposite based on ZnMn₂O₄ nanoparticles and porous reduced graphene oxide nanosheets (ZnMn₂O₄-PGO) for the electrocatalytic detection of flutamide (FLU) drug. The crystallinity and morphological properties of ZnMn₂O₄-PGO composite examined by different characterization techniques such as X-ray diffraction, Raman spectroscopy and so on. The fabricated ZnMn₂O₄-PGO nanocomposite modified electrode exhibited superior electrocatalytic performance to FLU drug in an optimized pH electrolyte. Fascinatingly, the electrode received a wide linear range (0.05-3.5 µM) with limit of detection of 8 nM. Besides, the developed ZnMn₂O₄-PGO nanocomposite electrode showed good sensitivity 1.05 µAµM^-1 cm^-2 and excellent selectivity for FLU detection in presence of various interfering species. A developed disposable electrode was scrutinized to determine FLU level in human urine samples by spiking method and the results achieved good recoveries in real sample analysis.

Highly Efficient Methylene Blue Dye Removal by Nickel Molybdate Nanosorbent

Removing methylene blue (MB) dye from aqueous solutions was examined by the use of nickel molybdate (α-NiMoO₄) as an adsorbent produced by an uncomplicated, rapid, and cost-effective method. Different results were produced by varying different parameters such as the pH, the adsorbent dose, the temperature, the contact time, and the initial dye concentration. Adsorbent dose and pH had a major removal effect on MB. Interestingly, a lower amount of adsorbent dose caused greater MB removal. The amount of removal gained was efficient and reached a 99% level with an initial methylene blue solution concentration of ≤160 ppm at pH 11. The kinetic studies indicated that the pseudo-second-order kinetic model relates very well with that of the obtained experimental results. The thermodynamic studies showed that removing the MB dye was favorable, spontaneous, and endothermic. Impressively, the highest quantity of removal amount of MB dye was 16,863 mg/g, as shown by the Langmuir model. The thermal regeneration tests revealed that the efficiency of removing MB (11,608 mg/g) was retained following three continuous rounds of recycled adsorbents. Adsorption of MB onto α-NiMoO₄ nanoparticles and its regeneration were confirmed by Fourier transform infrared spectroscopy (FTIR) analysis and scanning electron microscopy (SEM) analysis. The results indicated that α-NiMoO₄ nanosorbent is an outstanding and strong candidate that can be used for removing the maximum capacity of MB dye in wastewater.

Iron Molybdate Fe2(MoO4)3 Nanoparticles: Efficient Sorbent for Methylene Blue Dye Removal from Aqueous Solutions

The present study investigated iron molybdate (Fe₂(MoO₄)₃), synthesized via a simple method, as a nanosorbent for methylene blue (MB) dye removal from aqueous solutions. Investigations of the effects of several parameters like contact time, adsorbent dose, initial dye concentration, temperature and pH were carried out. The results showed that MB removal was affected, significantly, by adsorbent dose and pH. Interestingly, lower values of adsorbent dose resulted in the removal of higher amounts of MB. At the optimum pH, the removal efficiency of 99% was gained with an initial MB concentration of ≤60 ppm. The kinetic study specified an excellent correlation of the experimental results with the pseudo-second-order kinetics model. Thermodynamic studies proved a spontaneous, favorable and endothermic removal. The maximum amount of removal capacity of MB dye was 6173 mg/g, which was determined from the Langmuir model. The removal efficiency was shown to be retained after three cycles of reuse, as proven by thermal regeneration tests. The presence and adsorption of the dye onto the Fe₂(MoO₄)₃ nanoparticle surface, as well as the regeneration of the latter, was ascertained by scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR). These findings are indicative that the investigated nanosorbent is an excellent candidate for the removal of MB in wastewater.

Cs desorption behavior during hydrothermal treatment of illite with oxalic acid

The desorption of radioactive cesium (Cs) in soil is influenced by the clay mineral type, adsorption site, and concentration of Cs. In this study, experiments to detect desorption of non-radioactive and radioactive Cs from illite using oxalic acid were performed for 2 days at 70 °C in hydrothermal conditions. The results showed that the ¹³³Cs removal efficiency by oxalic acid and inorganic acid treatment was similar at high concentration (22.86 mmol/kg) of non-radioactive ¹³³Cs. In the radioactive ¹³⁷Cs experiment, the removal efficiency by oxalic acid was higher than that by inorganic acid at low concentration (0.79 × 10^-6 mmol/kg) of radioactive ¹³⁷Cs. Based on the illite hypothetical frayed edge site (FES) concentration of 0.612 mmol/kg, the results suggested that ¹³⁷Cs was preferentially adsorbed to FES on illite. The ¹³⁷Cs at low concentration was difficult to remove because it was irreversible adsorption to FES, while the non-radioactive Cs at high concentration was mainly adsorbed to planar sites, and so was easy to desorb by ion exchange. Based on the results of NMR, FTIR, and XPS analyses, we concluded that the higher efficiency of ¹³⁷Cs removal at low concentration by oxalic acid treatment than by treatment with inorganic acid was because of chelation effects associated with the complexation of oxalic acid (ligands) and metal ions in irreversible site (FES).

Ultrasonication and hydrothermal assisted synthesis of cloud-like zinc molybdate nanospheres for enhanced detection of flutamide

Ultrasonication is one of the emerging probes for nanoparticles synthesis as well as promoting the material property by treasuring the precious time during a chemical reaction. In this present work, we successfully designed a cloud-like α-ZnMoO₄ nanospheres (ZMNS) using ultrasound assistance (bath sonication with the power of 60 W and frequency of 37/80 kHz) hydrothermal method for catalyzing the effective electrochemical determination of anti-androgen drug candidate flutamide (FLT). The crystallinity and phase purity were investigated using powder X-ray diffractometric analysis. The FTIR and Raman spectra information were compared to detect the possible bonding in ZMNS. The texture and surface morphology were studied using Field emission scanning electron microscope and High-resolution Transmission electron microscope images. The presence of the elements (Zn, Mo and O) and the absence of any other impurities were monitored and confirmed using EDAX analysis. The fabrication of ZMNS modified GCE was performed carefully. Additionally, the ZMNS modified glassy carbon electrode (GCE) exhibits superior electrocatalytic activity by means of higher cathodic peak current towards the detection of FLT. The fashioned electrode attained two wide linear response ranges (0.1 to 73 µM; 111 to 1026 µM) with a lower detection limit of about 33 nM correspondingly. Furthermore, the fabricated sensor displayed excellent sensitivity of 1.095 µA µM^-1 cm^-2 and good selectivity for FLT sensing even in the existence of similar interfering compounds and biomolecules. Along with that, the designed sensor executed noticeable reproducibility, repeatability, and enduring stability.

Molybdenum Trioxide: Efficient Nanosorbent for Removal of Methylene Blue Dye from Aqueous Solutions

Nano Molybdenum trioxide (α-MoO₃) was synthesized in an easy and efficient approach. The removal of methylene blue (MB) in aqueous solutions was studied using this material. The effects of various experimental parameters, for example contact time, pH, temperature and initial MB concentration on removal capacity were explored. The removal of MB was significantly affected by pH and temperature and higher values resulted in increase of removal capacity of MB. The removal efficiency of Methylene blue was 100% at pH = 11 for initial dye concentrations lower than 150 ppm, with a maximum removal capacity of 152 mg/g of MB as gathered from Langmuir model. By comparing the kinetic models (pseudo first-order, pseudo second-order and intraparticle diffusion model) at various conditions, it has been found that the pseudo second-order kinetic model correlates with the experimental data well. The thermodynamic study indicated that the removal was endothermic, spontaneous and favorable. The thermal regeneration studies indicated that the removal efficiency (99%) was maintained after four cycles of use. Fourier Transform Infrared (FTIR) and Scanning Electron Microscopy (SEM) confirmed the presence of the MB dye on the α-MoO₃ nanoparticles after adsorption and regeneration. The α-MoO₃ nanosorbent showed excellent removal efficiency before and after regeneration, suggesting that it can be used as a promising adsorbent for removing Methylene blue dye from wastewater.

Modified Nigella Sativa Seeds as a Novel Efficient Natural Adsorbent for Removal of Methylene Blue Dye

The aim of this work was to investigate the use of modified nigella sativa seeds (MNS) for removing of methylene blue (MB) dye from aqueous solution. The nigella sativa (NS) seeds have been pre-treated at different temperatures and periods of time. The maximum adsorption of MB was achieved using NS sample washed with distilled water pre-heated at 65 °C for one hour, then ground to 250 µm particle size (MNS-4). Different parameters were modified to optimize the removal process of MB using MNS-4, such as contact times, temperatures, initial dye concentrations, adsorbent doses, and pH of the solution. MNS-4 exhibited a removal efficiency of 99% for initial dye concentrations greater than 800 ppm at pH value of 11. The kinetic study indicated that the removal process follows the pseudo second order model. The removal was spontaneous, endothermic and favorable, and this was indicated by the thermodynamic study. Maximum removal capacity was 194 mg/g as deduced from Langmuir model. The removal efficiency was maintained after four recycle uses. The modified nigella sativa seeds were characterized before, and after adsorption and regeneration by Fourier Transform infrared (FTIR) and scanning electron microscopy (SEM). The data suggested that nigella sativa seeds could be a prospective agent for removing MB from wastewater.