Quantum Chemical Calculations on CHOP Derivatives-Spanning the Chemical Space of Phosphinidenes, Phosphaketenes, Oxaphosphirenes, and COP- Isomers

Carbamoylphosphinidene: A Phosphorus Analogue of Carbonyl Nitrene

Carbonyl nitrenes are versatile intermediates that have been extensively characterized; however, their phosphorus analogues remain largely unknown. Herein, we report the observation of a rare example of carbonyl phosphinidene NH2C(O)P, which was generated through the photolytic (193 nm) dehydrogenation of phosphinecarboxamide (NH2C(O)PH2) in a solid N2-matrix at 12 K. The characterization of NH2C(O)P in the triplet ground state with matrix-isolation IR and ultraviolet-visible (UV-vis) spectroscopy is supported by comprehensive isotope labeling experiments (D and 15N) and quantum chemical calculations. Upon visible-light irradiation at 680 nm, NH2C(O)P inserts into dihydrogen by the reformation of NH2C(O)PH2 with concomitant isomerization to the more stable aminophosphaketene (NH2PCO). Additionally, the photoisomerization of NH2C(O)PH2 to NH2C(OH) = PH along with decomposition by yielding hydrogen-bonded complexes HNCO···PH3 and HPCO···NH3 has been observed in the matrix.

Phosphinidenes: Fundamental Properties and Reactivity

Phosphinidenes are heavy congeners of nitrenes that have been broadly used as in situ reagents in synthetic phosphorus chemistry and also serve as versatile ligands in coordination with transition metals. However, the detection of free phosphinidenes is largely challenged by their high reactivity and also the lack of suitable synthetic methods, rendering the knowledge about the fundamental properties of this class of low-valent phosphorus compounds limited. Recently, an increasing number of free phosphinidenes bearing prototype structural and bonding properties have been prepared for the first time, thus enabling the exploration of their distinct reactivity from the nitrene analogues. This Concept article will discuss the experimental approaches for the generation of the highly unstable phosphinidenes and highlight their distinct reactivity from the nitrogen analogues so as to stimuate future studies about their potential applications in phosphorus chemistry.

1,2σ3λ3-Oxaphosphetanes and Their P-Chalcogenides-A Combined Experimental and Theoretical Study

Although 1,2σ⁵λ⁵-oxaphosphetanes have been known for a long time, the “low-coordinate” 1,2σ³λ³-oxaphosphetanes have only been known since their first synthesis in 2018 via decomplexation. Apart from ligation of this P-heterocycle to gold(I)chloride and the oxidation using ortho-chloranil, nothing on their chemistry has been reported so far. Herein, we describe the synthesis of new 1,2σ³λ³-oxaphosphetane complexes (3a–e) and free derivatives (4a–e), as well as reactions of 4a with chalcogens and/or chalcogen transfer reagents, which yielded the P-chalcogenides (14–16a; Ch = O, S, Se). We also report on the theoretical results of the reaction pathways of C-phenyl-substituted 1,2 σ³λ³-oxaphosphetanes and ring strain energies of 1,2σ⁴λ⁵-oxaphosphetane P-chalcogenides.

Accurate Ring Strain Energies of Unsaturated Three-Membered Heterocycles with One Group 13-16 Element

High-quality ring strain energy (RSE) data for 1H-unsaturated (CH)₂X parent rings, where X is a group 13–16 element, are reported in addition to the 2H-isomers of the pnictogenirene rings. RSE data are obtained from appropriate homosdesmotic reactions and calculated at the DLPNO-CCSD(T)/def2-TZVPP//B3LYP-D3/def2-TZVP(ecp) level. 1H-Tallirene and 1H-plumbirene have unique donor–acceptor structures between an acetylene π(CC) orbital and an empty p orbital of a metallylene subunit (a Dewar–Chatt–Duncanson description) and therefore cannot be described as proper rings but as pseudocyclic structures. Also, 1H-indirene and 1H-oxirene lack ring critical points and constitute borderline cases of pseudorings. 1H-Unsaturated rings exhibit enhanced RSE compared to their saturated homologues. The mechanism of ring strain relaxation by increasing the s character in the lone pair (LP) of group 15–16 elements is remarkable and increases on descending the groups. Furthermore, RSE is affected by the aromatic character of group 13 rings and certain aromatic or antiaromatic character in group 14 or 15–16 rings, respectively, which tend to vanish on descending the group as shown by NICS(1) values. 2H-Unsaturated rings were found only for group 15 elements (although only 2H-azirine shows a proper cyclic structure) and displayed lower RSE (higher stability) than the corresponding 1H-isomers.

Accurate ring strain energies (RSE) are calculated for three-membered 1H-unsaturated rings containing a 13−16 group element and group 15 2H-isomers. The presence or absence of lone pairs at the heteroatom and the existence of intrinsic or residual (anti)aromaticity were shown to affect the RSE.

CHNO isomers and derivatives – a computational overview

A state-of-the-art computational study of CHNO isomers is presented, including substituted derivatives and cyclotrimerization and deprotonation products.

Vibrational spectrum and photochemistry of phosphaketene HPCO

The vibrational spectra of the simplest phosphaketene HPCO and its isotopologue DPCO in solid Ar-matrices at 12.0 K have been analyzed with the aid of the computations at the CCSD(T)-F12a/cc-pVTZ-F12 level using configuration-selective vibrational configuration interaction (VCI). In addition to the four IR fundamentals, four overtone and ten combination bands have been unambiguously identified. Furthermore, the photochemistry of HPCO in the matrix has been investigated for the first time. Upon UV-light irradiation (365 or 266 nm), CO-elimination occurs by forming the parent phosphinidene HP that can be trapped by ˙NO to yield the elusive phosphinimine-N-oxyl radical HPNO˙. In contrast, an excimer laser (193 nm) irradiation of HPCO causes additional decomposition to H˙ and ˙PCO with concomitant formation of the long-sought phosphaethyne HOCP.

Indirect Access to Carbene Adducts of Bismuth- and Antimony-Substituted Phosphaketene and Their Unusual Thermal Transformation to Dipnictines and [(NHC)2OCP][OCP]

The synthesis and thermal redox chemistry of the first antimony (Sb)– and bismuth (Bi)–phosphaketene adducts are described. When diphenylpnictogen chloride [Ph₂PnCl (Pn = Sb or Bi)] is reacted with sodium 2-phosphaethynolate [Na[OCP]·(dioxane)_x], tetraphenyldipnictogen (Ph₂Pn–PnPh₂) compounds are produced, and an insoluble precipitate forms from solution. In contrast, when the N-heterocyclic carbene adduct (NHC)–PnPh₂Cl is combined with [Na[OCP]·(dioxane)_x], Sb– and Bi–phosphaketene complexes are isolated. Thus, NHC serves as an essential mediator for the reaction. Immediately after the formation of an intermediary pnictogen–phosphaketene NHC adduct [NHC–PnPh₂(PCO)], the NHC ligand transfers from the Pn center to the phosphaketene carbon atom, forming NHC–C(O)P-PnPh₂ [Pn = Sb (3) or Bi (4)]. In the solid state, 3 and 4 are dimeric with short intermolecular Pn–Pn interactions. When compounds 3 and 4 are heated in THF at 90 and 70 °C, respectively, the pnictogen center Pn^III is thermally reduced to Pn^II to form tetraphenyldipnictines (Ph₂Pn–PnPh₂) and an unusual bis-carbene-supported OCP salt, [(NHC)₂OCP][OCP] (5). The formation of compound 5 and Ph₂Pn–PnPh₂ from 3 or 4 is unique in comparison to the known thermal reactivity for group 14 carbene–phosphaketene complexes, further highlighting the diverse reactivity of [OCP]⁻ with main-group elements. All new compounds have been fully characterized by single-crystal X-ray diffraction, multinuclear NMR spectroscopy (¹H, ¹³C, and ³¹P), infrared spectroscopy, and elemental analysis (1, 2, and 5). The electronic structure of 5 and the mechanism of formation were investigated using density functional theory (DFT).

An N-heterocyclic carbene (NHC) was used to support the otherwise unstable Ph₂Sb—P=C=O and Ph₂Bi—P=C=O moieties. Exploration of the thermal chemistry of these NHC−phosphaketene adducts reveals the formation of the salt [NHC₂OCP][OCP]. This present work demonstrates the thermal chemistry of the 2-phospaethynolate anion with heavier pnictogens (Sb and Bi).

Accurate Ring Strain Energy Calculations on Saturated Three-Membered Heterocycles with One Group 13-16 Element

Accurate ring strain energy (RSE) data for parent (CH₂)₂X rings are reported, where X are group 13-16 elements (El) in their lowest oxidation state, from the second to the sixth row, with their covalence completed by bonds to H. They are obtained from appropriate homodesmotic and hyper-homodesmotic reactions at different levels up to the CCSD(T) level, thus providing a benchmark of high-quality reference RSE values, as well as acceptably accurate faster lower-level options. Derivatives of indium, thallium, and lead cannot be properly described by a three-member ring connectivity, because they display a unique donor-acceptor structure from an ethylene π(C═C) orbital to an empty p orbital of a metallylene subunit. The RSE of groups 13 and 14 heterocycles increases on descending in the group (except for Ga and Ge), while it decreases for groups 15 and 16. The latter is presumably due to a strain-releasing mechanism favored by the increase of p-character at the sp³-type atomic orbital used by El in the endocyclic El-C bonds, %p(El)_El-C, originated by the tendency of the El lone pairs in groups 15-16 to increase their s-character. This strain-releasing mechanism does not exist in heavier tetrels, which keep almost unchanged the p-character in the endocyclic bonds at El, whereas for triels the p-character is still lower owing to their sp²-like hybridization. Remarkable linear correlations were found between the RSE and either the above-mentioned %p(El)_El-C, the distal C-C bond distance or the relaxed force constants for the endocyclic bond angles.

1,2-Insertion reactions of alkynes into Ge-C bonds of arylbromogermylene

1,2-Insertion reactions of alkynes into the Ge-C bonds in dibromodigermenes afford stable crystalline bromovinylgermylenes. In contrast to previously reported Lewis-base-supported vinylgermylenes, the bromovinylgermylene obtained from reaction of the bromogermylene with 3-hexyne via such an 1,2-insertion is a donor-free monomer. A feasible reaction mechanism, proposed on the basis of the observed experimental results in combination with theoretical calculations, suggests that the [1+2]-cycloadduct and the insertion product are the kinetic and thermodynamic product, respectively.

Revealing electronic features governing hydrolysis of cephalosporins in the active site of the L1 metallo-β-lactamase

The QM/MM simulations followed by electron density feature analysis are carried out to deepen the understanding of the reaction mechanism of cephalosporin hydrolysis in the active site of the L1 metallo-β-lactamase. The differences in reactivity of ten similar cephalosporin compounds are explained by using an extended set of bonding descriptors. The limiting step of the reaction is characterized by the proton transfer to the nitrogen atom of the cephalosporin thiazine ring accompanied with formation of the C₄ Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> C₃ double bond in its N–C₄–C₃ fragment. The temporary N⋯H–O_w hydrogen bond, which is formed in the transition state of the limiting step of the reaction was recognized as a key atomic interaction governing the reactivity of various cephalosporins. Non-local real-space bonding descriptors show that different extent of localization of electron lone pair at N atom in the transition state affect the reactivity of compounds: smaller electron localization is typical for the less reactive species. In particular, the Fermi hole analysis shows how exchange electron correlation in the N⋯H–O_w fragment control electron lone pair localization. Delocalization tensor, linear response kernel and source function indicate that features of electron delocalization in the N–C₄–C₃ fragment of cephalosporins in the transition state complexes determine the differences in C₄–C₃ bond for substrates with high and low rate constants. The C₄–C₃ bond of the N–C₄–C₃ fragment at the transition state is similar to that of the preceding intermediate for the less reactive species and resembles the features of the enzyme–product complex for more reactive compounds. The power and limitations of the descriptors applied for solving the problem are discussed and the generality of approach is stressed.

Combination of QM/MM and modern bonding descriptors explains different reactivity of cephalosporins in the active site of the L1 metallo-β-lactamase.

Synthesis of free and ligated 1,2-thiaphosphetanes – expanding the pool of strained P-ligands

The 1,2-thiaphosphetane heterocycle could be synthesized for the first time in the coordination sphere of a metal complex (I) from which the free ligand (II) could be obtained, too.