Cholesterol-Based Compounds: Recent Advances in Synthesis and Applications

PH-Triggered, Lymph Node Focused Immunodrug Release by Polymeric 2-Propionic-3-Methyl-maleic Anhydrides with Cholesteryl End Groups

Gaining spatial control over innate immune activation is of great relevance during vaccine delivery and anticancer therapy, where one aims at activating immune cells at draining lymphoid tissue while avoiding systemic off-target innate immune activation. Lipid-polymer amphiphiles show high tendency to drain to lymphoid tissue upon local administration. Here, pH-sensitive, cholesteryl end group functionalized polymers as stimuli-responsive carriers are introduced for controlled immunoactivation of draining lymph nodes. Methacrylamide-based monomers bearing pendant 2-propionic-3-methylmaleic anhydride groups are polymerized by Reversible Addition-Fragmentation Chain Transfer (RAFT) polymerization using a cholesterol chain-transfer agent (chol-CTA). The amine-reactive anhydrides are conjugated with various amines, however, while primary amines afforded irreversible imides, secondary amines provided pH-responsive conjugates that are released upon acidification. This can be applied to fluorescent dyes for irreversibly carrier labeling or immunostimulatory Toll-like receptor (TLR) 7/8 agonists as cargos for pH-responsive delivery. Hydrophilization of remaining anhydride repeating units with short PEG-chains yielded cholesteryl-polymer amphiphiles that showed efficient cellular uptake and increased drug release at endosomal pH. Moreover, reversibly conjugated TLR 7/8 agonist amphiphiles efficiently drained to lymph nodes and increased the number of effectively maturated antigen-presenting cells after subcutaneous injection in vivo. Consequently, cholesteryl-linked methacrylamide-based polymers with pH-sensitive 2-propionic-3-methylmaleic anhydride side groups provide ideal features for immunodrug delivery.

Formulation Strategies to Overcome Amphotericin B Induced Toxicity

Fungal infection poses a major global threat to public health because of its wide prevalence, severe mortality rate, challenges involved in diagnosis and treatment, and the emergence of drug-resistant fungal strains. Millions of people are getting affected by fungal infection, and around 3.8 million people face death per year due to fungal infection, as per the latest report. The polyene antibiotic AmB has an extensive record of use as a therapeutic moiety against systemic fungal infection and leishmaniasis since 1960. AmB has broad-spectrum fungistatic and fungicidal activity. AmB exerts its therapeutic activity at the cellular level by binding to fungal sterol and forming hydrophilic pores, releasing essential cellular components and ions into the extracellular fluid, leading to cell death. Despite using AmB as an antifungal and antileishmanial at a broad scale, its clinical use is limited due to drug-induced nephrotoxicity resulting from binding the aggregated form of the drug to mammalian sterol. To mitigate AmB-induced toxicity and to get better anti-fungal therapeutic outcomes, researchers have developed nanoformulations, self-assembled formulations, prodrugs, cholesterol- and albumin-based AmB formulations, AmB-mAb combination therapy, and AmB cochleates. These formulations have helped to reduce toxicity to a certain extent by controlling the aggregation state of AmB, providing sustained drug release, and altering the physicochemical and pharmacokinetic parameters of AmB. Although the preclinical outcome of AmB formulations is quite satisfactory, its parallel result at the clinical level is insignificant. However, the safety and efficacy of AmB therapy can be improved at the clinical stage by continuous investigation and collaboration among researchers, clinicians, and pharmaceutical companies.

Cholesterol-Supported Liquid-Phase Synthesis of Betaines and Organic Cations without Chromatography

Cholesterol was explored as a support for liquid-phase synthesis. Without the need for chromatography, the cholesterol-supported liquid-phase approach gave access to diverse betaines possessing chiral ammonium, phosphonium, and sulfonium ions. The cholesterol-supported method was further demonstrated by the synthesis of cationic amides and hydrazides.

Cholesterol neutralized vemurafenib treatment by promoting melanoma stem-like cells via its metabolite 27-hydroxycholesterol

Vemurafenib has been used as first-line therapy for unresectable or metastatic melanoma with BRAFV600E mutation. However, overall survival is still limited due to treatment resistance after about one year. Therefore, identifying new therapeutic targets for melanoma is crucial for improving clinical outcomes. In the present study, we found that lowering intracellular cholesterol by knocking down DHCR24, the limiting synthetase, impaired tumor cell proliferation and migration and abrogated the ability to xenotransplant tumors. More importantly, administration of DHCR24 or cholesterol mediated resistance to vemurafenib and promoted the growth of melanoma spheroids. Mechanistically, we identified that 27-hydroxycholesterol (27HC), a primary metabolite of cholesterol synthesized by the enzyme cytochrome P450 27A1 (CYP27A1), reproduces the phenotypes induced by DHCR24 or cholesterol administration and activates Rap1-PI3K/AKT signaling. Accordingly, CYP27A1 is highly expressed in melanoma patients and upregulated by DHCR24 induction. Dafadine-A, a CYP27A1 inhibitor, attenuates cholesterol-induced growth of melanoma spheroids and abrogates the resistance property of vemurafenib-resistant melanoma cells. Finally, we confirmed that the effects of cholesterol on melanoma resistance require its metabolite 27HC through CYP27A1 catalysis, and that 27HC further upregulates Rap1A/Rap1B expression and increases AKT phosphorylation. Thus, our results suggest that targeting 27HC may be a useful strategy to overcome treatment resistance in metastatic melanoma.

Lipid-Based Nanotechnology: Liposome

Over the past several decades, liposomes have been extensively developed and used for various clinical applications such as in pharmaceutical, cosmetic, and dietetic fields, due to its versatility, biocompatibility, and biodegradability, as well as the ability to enhance the therapeutic index of free drugs. However, some challenges remain unsolved, including liposome premature leakage, manufacturing irreproducibility, and limited translation success. This article reviews various aspects of liposomes, including its advantages, major compositions, and common preparation techniques, and discusses present U.S. FDA-approved, clinical, and preclinical liposomal nanotherapeutics for treating and preventing a variety of human diseases. In addition, we summarize the significance of and challenges in liposome-enabled nanotherapeutic development and hope it provides the fundamental knowledge and concepts about liposomes and their applications and contributions in contemporary pharmaceutical advancement.

Phase behaviour and adsorption of deoxyribonucleic acid onto an azobenzene liquid crystalline ligand at the interfaces

Azobenzene liquid crystalline (ALC) ligand contains a cholesteryl group linked to an azobenzene moiety through a carbonyl dioxy spacer (C7) and terminated with an amine group as a polar head. The phase behaviour of the C7 ALC ligand at the air-water (A-W) interface is investigated employing surface manometry. The surface pressure-area per molecule isotherm shows that C7 ALC ligand exhibit two different phases following the phase sequence viz., liquid expanded (LE₁ and LE₂) and then collapse to three-dimensional crystallites. Further, our investigations under different pH conditions and in the presence of DNA reveal the following. Compared to the bulk, the acid dissociation constant (pK_a) of an individual amine reduces to 5 at the interfaces. For pH (3.5) < pK_a, the protonation of amine groups of C7 ALC ligand facilitates the condensation of the film and enhances the stability. For pH values > pK_a, the phase behaviour of the ligand remains the same due to the partial dissociation of the amine groups. The presence of DNA in the sub-phase result in the expansion of isotherm to the higher area per molecule and the compressional modulus extracted reveals the phase sequence; liquid expanded, liquid condensed, followed by a collapse. Further, the kinetics of adsorption of DNA to the amine groups of the ligand is investigated, suggesting the interactions are influenced by surface pressure corresponding to different phases and pH of the sub-phase. Brewster angle microscope studies are carried out at different surface densities of the ligand as well as in the presence of DNA also supports this inference. Atomic force microscope is employed to acquire the surface topography and height profile of C7 ALC ligand (1 layer) after transferring on onto a silicon substrate using Langmuir Blodgett deposition. The difference in the surface topography and thickness of the film indicates the adsorption of DNA onto the amine groups of the ligand. The characteristic UV-visible absorption bands of the ligand films (10 layers) at the air-solid interface are tracked and the hypsochromic shift of these bands is also attributed to these DNA interactions.

Revisiting the bromination of 3β-hydroxycholest-5-ene with CBr4/PPh3 and the subsequent azidolysis of the resulting bromide, disparity in stereochemical behavior

Cholesterol reacts under Appel conditions (CBr4/PPh3) to give 3,5-cholestadiene (elimination) and 3β-bromocholest-5-ene (substitution with retention of configuration). Thus, the bromination of cholesterol deviates from the stereochemistry of the standard Appel mechanism due to participation of the Δ5 π-electrons. In contrast, the subsequent azidolysis (NaN3/DMF) of 3β-bromocholest-5-ene proceeds predominantly by Walden inversion (SN2) affording 3α-azidocholest-5-ene. The structures of all relevant products were revealed by X-ray single crystal structure analyses, and the NMR data are in agreement to the reported ones. In light of these findings, we herein correct the previous stereochemical assignments reported by one of us in the Beilstein J. Org. Chem. 2015, 11, 1922-1932 and the Monatsh. Chem. 2018, 149, 505-517.

The Antifungal Antibiotic Filipin as a Diagnostic Tool of Cholesterol Alterations in Lysosomal Storage Diseases and Neurodegenerative Disorders

Cholesterol is the most considerable member of a family of polycyclic compounds understood as sterols, and represents an amphipathic molecule, such as phospholipids, with the polar hydroxyl group located in position 3 and the rest of the molecule is completely hydrophobic. In cells, it is usually present as free, unesterified cholesterol, or as esterified cholesterol, in which the hydroxyl group binds to a carboxylic acid and thus generates an apolar molecule. Filipin is a naturally fluorescent antibiotic that exerts a primary antifungal effect with low antibacterial activity, interfering with the sterol stabilization of the phospholipid layers and favoring membrane leakage. This polyene macrolide antibiotic does not bind to esterified sterols, but only to non-esterified cholesterol, and it is commonly used as a marker to label and quantify free cholesterol in cells and tissues. Several lines of evidence have indicated that filipin staining could be a good diagnostic tool for the cholesterol alterations present in neurodegenerative (e.g., Alzheimer's Disease and Huntington Disease) and lysosomal storage diseases (e.g., Niemann Pick type C Disease and GM1 gangliosidosis). Here, we have discussed the uses and applications of this fluorescent molecule in lipid storage diseases and neurodegenerative disorders, exploring not only the diagnostic strength of filipin staining, but also its limitations, which over the years have led to the development of new diagnostic tools to combine with filipin approach.

A novel saponin liposomes based on the couplet medicines of Platycodon grandiflorum-Glycyrrhiza uralensis for targeting lung cancer

Liposomes have been widely used for targeted drug delivery, but the disadvantages caused by cholesterol limit the application of conventional liposomes in cancer treatment. The compatibility basis of couplet medicines and the compatibility principle of the traditional Chinese medicine principle of ‘monarch, minister, assistant and guide’ are the important theoretical basis of Chinese medicine in the treatment of tumor and the important method to solve the problem of high toxicity. In this study, the active ingredients of the couplet medicines Platycodon grandiflorum and Glycyrrhiza uralensis were innovatively utilized, and glycyrrhizic acid (GA) was encapsulated in liposomes constructed by mixing saponin and lecithin, and cholesterol was replaced by platycodin and ginsenoside to construct saponin liposomes (RP-lipo) for the drug delivery system of Chinese medicine. Compared with conventional liposomes, PR-lipo@GA has no significant difference in morphological characteristics and drug release behavior, and also shows stronger targeting of lung cancer cells and anti-tumor ability in vitro, which may be related to the pharmacological properties of saponins themselves. Thus, PR-lipo@GA not only innovatively challenges the status of cholesterol as a liposome component, but also provides another innovative potential system with multiple functions for the clinical application of TCM couplet medicines.

Multifunctional β-Cyclodextrin-Poly(ethylene glycol)-Cholesterol Nanomicelle for Anticancer Drug Delivery

Nanoparticle drug delivery systems have drawn considerable attention worldwide due to their unique characteristics and advantages in anticancer drug delivery. Herein, the curcumin (Cur) loaded nanomicelles with two-stage drug release behavior were developed. β-Cyclodextrin (β-CD) and cholesterol were conjugated onto both ends of the poly(ethylene glycol) (PEG) chain to obtain an amphiphilic β-CD-PEG-Chol. The Cur was loaded into the cavities of β-CD and nanomicelle when the β-CD-PEG-Chol self-assembled to the Cur@β-CD-PEG-Chol nanomicelles (Cur@CPC NMs). These Cur@CPC NMs are spherical particles with a particle size of 120.9 nm. The Cur drug loading capacity of Cur@CPC NMs are 61.6 ± 6.9 mg/g. The release behavior of Cur from Cur@CPC NMs conformed to a two-stage mode of "burst-release followed by sustained-release". The prepared Cur@CPC NMs possess high storage stability and excellent hemocompatibility. Moreover, these Cur@CPC NMs exhibit satisfactory antioxidant activity and anticancer activity, resulting in significant reduction in intracellular H₂O₂-induced ROS and a nearly 50% lethality rate of HepG-2 cells. Meanwhile, the Cur@CPC NMs show good anti-inflammatory activity, by which the secretion of inflammatory factors of IL-6 and TNF-α are inhibited. Overall, the developed Cur@CPC NMs show application prospects in anticancer drug delivery systems.

Charge-Convertible and Reduction-Sensitive Cholesterol-Containing Amphiphilic Copolymers for Improved Doxorubicin Delivery

For achieving successful chemotherapy against cancer, designing biocompatible drug delivery systems (DDSs) with long circulation times, high cellular endocytosis efficiency, and targeted drug release is of upmost importance. Herein, a well-defined PEG-b-P(MASSChol-co-MANBoc) block copolymer bearing redox-sensitive cholesteryl-side group was prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization (with non-redox PEG-b-P(MACCChol-co-MAN-DCA) as the reference), and 1,2-dicarboxylic-cyclohexene acid (DCA) was then grafted onto the hydrophobic block to endow it with charge-convertible characteristics under a tumor microenvironment. The amphiphilic copolymer could be assembled into polymeric spherical micelles (SSMCs) with polyethylene glycol (PEG) as the corona/shell, and anti-cancer drug doxorubicin (DOX) was successfully encapsulated into the micellar core via strong hydrophobic and electrostatic interactions. This nanocarrier showed high stability in the physiological environment and demonstrated "smart" surface charge conversion from negative to positive in the slightly acidic environment of tumor tissues (pH 6.5~6.8), as determined by dynamic light scattering (DLS). Moreover, the cleavage of a disulfide bond linking the cholesterol grafts under an intracellular redox environment (10 mM GSH) resulted in micellar dissociation and accelerated drug release, with the non-redox-responsive micelles (CCMCs) as the control. Additionally, a cellular endocytosis and tumor proliferation inhibition study against MCF-7 tumor cells demonstrated the enhanced endocytosis and tumor cell inhibitory efficiency of dual-responsive SSMCs/DOX nanomedicines, revealing potentials as multifunctional nanoplatforms for effective oncology treatment.

Synthesis of Novel Arsonolipids and Development of Novel Arsonoliposome Types

Arsonolipids represent a class of arsenic-containing compounds with interesting biological properties either as monomers or as nanostructure forming components, such as arsonoliposomes that possess selective anticancer activity as proven by in vitro and in vivo studies. In this work, we describe, for the first time, the synthesis of novel arsono-containing lipids where the alkyl groups are connected through stable ether bonds. It is expected that this class of arsonolipids, compared with the corresponding ester linked, will have higher chemical stability. To accomplish this task, a new methodology of general application was developed, where a small arsono compound, 2-hydroxyethylarsonic acid, when protected with thiophenol, can be used in an efficient and simple way as a building block for the synthesis of arsono-containing lipids as well as other arsono-containing biomolecules. Thus, besides the above-mentioned arsonolipid, an arsono cholesterol derivative was also obtained. Both ether arsonolipid and arsono cholesterol were able to form liposomes having similar physicochemical properties and integrity to conventional arsonoliposomes. Furthermore, a preliminary in vitro anticancer potential assessment of the novel ether arsonolipid containing liposomes against human prostate cancer (PC-3) and Lewis lung carcinoma (LLC) cells showed significant activity (dose- and time-dependent), which was similar to that of the conventional arsonoliposomes (studied before). Given the fact that novel arsonolipids may be more stable compared to the ones used in conventional arsonoliposomes, the current results justify further exploitation of the novel compounds by in vitro and in vivo studies.

Amphiphilic hyperbranched polyglycerol nanoarchitectures for Amphotericin B delivery in Candida infections

Although Amphotericin B (AMB) is considered the most effective anti-mycotic agent for treating Candida infections, its clinical use is limited due to its high toxicity. To address this issue, we developed cholesterol-based dendritic micelles of hyperbranched polyglycerol (HPG), including cholesterol-cored HPG (Chol-HPG) and cholesterol end-capped HPG (HPG@Chol), for AMB delivery. The findings suggested that the presence of cholesterol moieties could control AMB loading and release properties. Dendritic micelles inhibited AMB hemolysis and cytotoxicity in HEK 293 and RAW 264.7 cell lines while increasing antifungal activity against C. albicans biofilm formation. Furthermore, significantly lower levels of renal and liver toxicity biomarkers compared to Fungizone® ensured AMB-incorporated dendritic micelle biosafety, which was confirmed by histopathological evaluations. Overall, the Chol-HPG and HPG@Chol dendritic micelles may be a viable alternative to commercially available AMB formulations as well as an effective delivery system for other poorly soluble antifungal agents.

Steroid-Based Liquid Crystalline Polymers: Responsive and Biocompatible Materials of the Future

Steroid-based liquid crystal polymers and co-polymers have come a long way, with new and significant advances being made every year. This paper reviews some of the recent key developments in steroid-based liquid crystal polymers and co-polymers. It covers the structure–property relationship between cholesterol and sterol-based compounds and their corresponding polymers, and the influence of chemical structure and synthesis conditions on the liquid crystalline behaviour. An overview of the nature of self-assembly of these materials in solvents and through polymerisation is given. The role of liquid crystalline properties in the applications of these materials, in the creation of nano-objects, drug delivery and biomedicine and photonic and electronic devices, is discussed.

Microfluidic-Based Cationic Cholesterol Lipid siRNA Delivery Nanosystem: Highly Efficient In Vitro Gene Silencing and the Intracellular Behavior

Safe and efficient delivery of small interfering RNA (siRNA) is essential to gene therapy towards intervention of genetic diseases. Herein, we developed a novel cationic cholesterol lipid derivative (CEL) in which cholesterol hydrophobic skeleton was connected to L-lysine cationic headgroup via a hexanediol linker as the non-viral siRNA delivery carrier. Well-organized CEL/siRNA nanocomplexes (100-200 nm) were prepared by microfluidic-assisted assembly of CEL and siRNA at various N/P ratios. The CEL and CEL/siRNA nanocomplexes have lower cytotoxicity compared with bPEI25k. Delightfully, we disclosed that, in Hela-Luc and H1299-Luc cell lines, the micro-fluidic-based CEL/siRNA nanocomplexes exhibited high siRNA transfection efficiency under both serum-free condition (74-98%) and low-serum circumstances (80-87%), higher than that of lipofectamine 2000. These nanocomplexes also showed high cellular uptake through the caveolae/lipid-raft mediated endocytosis pathway, which may greatly contribute to transfection efficiency. Moreover, the time-dependent (0-12 h) dynamic intracellular imaging demonstrated the efficient delivery to cytoplasm after lysosomal co-localization. The results indicated that the microfluidic-based CEL/siRNA nanosystems possessed good stability, low cytotoxicity, high siRNA delivery efficiency, rapid cellular uptake and caveolae/lipid raft-dependent internalization. Additionally, this study provides a simple approach for preparing and applying a "helper lipid-free" cationic lipid siRNA delivery system as potential nanotherapeutics towards gene silencing treatment of (tumor) diseases.

GC- and UHPLC-MS Profiles as a Tool to Valorize the Red Alga Asparagopsis armata

Asparagopsis armata Harvey is a red alga native from the southern hemisphere and then introduced in the Mediterranean Sea and the Atlantic Ocean, including the Azores Archipelago, where it is considered an invasive alga. Some studies show that the extracts exhibit antimicrobial and antifouling activities, and it is incorporated in some commercialized cosmetic products. (e.g., Ysaline®). However, knowledge of this species chemical composition is scarce. The GC-MS and UHPLC-MS profiles of both the nonpolar and polar extracts were established to contribute to this problem solution. According to the results, A. armata is rich in a great structural variety of halogenated lipophilic and aromatic compounds, some of them identified here for the first time. In the lipophilic extract, 25 compounds are identified, being the halogenated compounds and fatty acids, the two major compound families, corresponding to 54.8% and 35.7% of identified compounds (224 and 147 mg/100 g of dry algae, respectively). The 1,4-dibromobuten-1-ol and the palmitic acid are the two most abundant identified compounds (155 and 83.4 mg/100 g of dry algae, respectively). The polar extract demonstrated the richness of this species in brominated phenolics, from which the cinnamic acid derivatives are predominant. The results obtained herein open new perspectives for valuing the A. armata as a source of halogenated compounds and fatty acids, consequently improving its biotechnological and economic potential. Promoting this seaweed and the consequent increase in its demand will contribute to biodiversity conservation and ecosystem sustainability.

Microwave Irradiation: Alternative Heating Process for the Synthesis of Biologically Applicable Chromones, Quinolones, and Their Precursors

Microwave irradiation has become a popular heating technique in organic synthesis, mainly due to its short reaction times, solventless reactions, and, sometimes, higher yields. Additionally, microwave irradiation lowers energy consumption and, consequently, is ideal for optimization processes. Moreover, there is evidence that microwave irradiation can improve the regioselectivity and stereoselectivity aspects of vital importance in synthesizing bioactive compounds. These crucial features of microwave irradiation contribute to its inclusion in green chemistry procedures. Since 2003, the use of microwave-assisted organic synthesis has become common in our laboratory, making our group one of the first Portuguese research groups to implement this heating source in organic synthesis. Our achievements in the transformation of heterocyclic compounds, such as (E/Z)-3-styryl-4H-chromen-4-ones, (E)-3-(2-hydroxyphenyl)-4-styryl-1H-pyrazole, (E)-2-(4-arylbut-1-en-3-yn-1-yl)-4H-chromen-4-ones, or (E)-2-[2-(5-aryl-2-methyl-2H-1,2,3-triazol-4-yl)vinyl]-4H-chromen-4-ones, will be discussed in this review, highlighting the benefits of microwave irradiation use in organic synthesis.

Effect of Crosslinkers on Optical and Mechanical Behavior of Chiral Nematic Liquid Crystal Elastomers

Chiral nematic (N*) liquid crystal elastomers (LCEs) are suitable for fabricating stimuli-responsive materials. As crosslinkers considerably affect the N*LCE network, we investigated the effects of crosslinking units on the physical properties of N*LCEs. The N*LCEs were synthesized with different types of crosslinkers, and the relationship between the N*LC polymeric system and the crosslinking unit was investigated. The N*LCEs emit color by selective reflection, in which the color changes in response to mechanical deformation. The LC-type crosslinker decreases the helical twisting power of the N*LCE by increasing the total molar ratio of the mesogenic compound. The N*LCE exhibits mechano-responsive color changes by coupling the N*LC orientation and the polymer network, where the N*LCEs exhibit different degrees of pitch variation depending on the crosslinker. Moreover, the LC-type crosslinker increases the Young's modulus of N*LCEs, and the long methylene chains increase the breaking strain. An analysis of experimental results verified the effect of the crosslinkers, providing a design rationale for N*LCE materials in mechano-optical sensor applications.

Carbocycle-Based Organogelators: Influence of Chirality and Structural Features on Their Supramolecular Arrangements and Properties

The rational design and engineer of organogel-based smart materials and stimuli-responsive materials with tuned properties requires the control of the non-covalent forces driving the hierarchical self-assembly. Chirality, as well as cis/trans relative configuration, also plays a crucial role promoting the morphology and characteristics of the aggregates. Cycloalkane derivatives can provide chiral chemical platforms allowing the incorporation of functional groups and hydrophobic structural units able for a convenient molecular stacking leading to gels. Restriction of the conformational freedom imposed by the ring strain is also a contributing issue that can be modulated by the inclusion of flexible segments. In addition, donor/acceptor moieties can also be incorporated favoring the interactions with light or with charged species. This review offers a perspective on the abilities and properties of carbocycle-based organogelators starting from simple cycloalkane derivatives, which were the key to establish the basis for an effective self-assembling, to sophisticated polycyclic compounds with manifold properties and applications.

Stimuli responsive dynamic transformations in supramolecular gels

Supramolecular gels are formed by the self-assembly of small molecules under the influence of various non-covalent interactions. As the interactions are individually weak and reversible, it is possible to perturb the gels easily, which in turn enables fine tuning of their properties. Synthetic supramolecular gels are kinetically trapped and usually do not show time variable changes in material properties after formation. However, such materials potentially become switchable when exposed to external stimuli like temperature, pH, light, enzyme, redox, and chemical analytes resulting in reconfiguration of gel matrix into a different type of network. Such transformations allow gel-to-gel transitions while the changes in the molecular aggregation result in alteration of physical and chemical properties of the gel with time. Here, we discuss various methods that have been used to achieve gel-to-gel transitions by modifying a pre-formed gel material through external perturbation. We also describe methods that allow time-dependent autonomous switching of gels into different networks enabling synthesis of next generation functional materials. Dynamic modification of gels allows construction of an array of supramolecular gels with various properties from a single material which eventually extend the limit of applications of the gels. In some cases, gel-to-gel transitions lead to materials that cannot be accessed directly. Finally, we point out the necessity and possibility of further exploration of the field.

Chol-Dex nanomicelles: Synthesis, characterization and evaluation as efficient drug carriers for colon targeting

Core-shell structures obtained from amphiphilic molecules on self-assembly in a medium have emerged as an important tool in the area of biomedical sciences. Here, we have synthesized cholesteryl-dextran (Chol-Dex) amphiphiles in sufficiently high yields via conjugation of cholesteryl hemisuccinate to dextran in two different concentrations (5 and 10%). After physicochemical and spectral analysis, the nanomicelles were subjected to size measurements. DLS and TEM confirmed the formation of core-shell type of nanomicelles. Hydrophobic drug-entrapped formulations (Metronidazole and Rifampicin) displayed sustained release behaviour of drugs from them. Sustained release at neutral pH demonstrated usefulness of the non-toxic delivery system for colon specific diseases.

Effects of Linkers on the Development of Liposomal Formulation of Cholesterol Conjugated Cobalt Bis(dicarbollides)

Boron neutron capture therapy (BNCT) remains an important treatment arm for cancer patients with locally invasive malignant tumors. This therapy needs a significant amount of boron to deposit in cancer tissues selectively, sparing other healthy organs. Most of the liposomes contain water-soluble polyhedral boron salts stay in the core of the liposomes and have low encapsulation efficiency. Thus, modifying the polyhedral boron core to make it hydrophobic and incorporating those into the lipid layer could be one of the ways to increase drug loading and encapsulation efficiency. Additionally, a systematic study about the linker-dependent effect on drug encapsulation and drug-release is lacking, particularly for the liposomal formulation of hydrophobic-drugs. To achieve these goals, liposomal formulations of a series of lipid functionalized cobalt bis(dicarbollide) compounds have been prepared, with the linkers of different hydrophobicity. Hydrophobicity of the linkers have been evaluated through logP calculation and its effect on drug encapsulation and release have been investigated. The liposomes have shown high drug loading, excellent encapsulation efficiency, stability, and non-toxic behavior. Release experiment showed minimal release of drug from liposomes in phosphate buffer, ensuring some amount of drug, associated with liposomes, can be available to tumor tissues for Boron Neutron Capture Therapy.

Polymeric Drug Delivery Systems Bearing Cholesterol Moieties: A Review

This review aims to provide an overview of polymers comprising cholesterol moiety/ies designed to be used in drug delivery. Over the last two decades, there have been many papers published in this field, which are summarized in this review. The primary focus of this article is on the methods of synthesis of polymers bearing cholesterol in the main chain or as side chains. The data related to the composition, molecular weight, and molecular weight distribution of polymers are presented. Moreover, other aspects, such as forms of carriers, types of encapsulated drugs, encapsulation efficiency and capacity, are also included.

Boron-Containing Lipids and Liposomes: New Conjugates of Cholesterol with Polyhedral Boron Hydrides

A series of boron-containing lipids were prepared by reactions of cyclic oxonium derivatives of polyhedron boranes and metallacarboranes (closo-dodecaborate anion, cobalt and iron bis(dicarbollides)) with amine and carboxylic acids which are derived from cholesterol. Stable liposomal formulations, on the basis of synthesized boron-containing lipids, hydrogenated soybean l-α-phosphatidylcholine and (HSPC) 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000] (DSPE-PEG) as excipients, were prepared and then characterized by dynamic light scattering (DLS) that revealed the formation of particles to be smaller than 200 nm in diameter. The resulting liposomal formulations showed moderate to excellent loading and entrapment efficiency, thus justifying the design of the compounds to fit in the lipid bilayer and ensuring ease of in vivo use for future application. The liposomal formulations based on cobalt and iron bis(dicarbollide)-based lipids were found to be nontoxic against both human breast normal epithelial cells MCF-10A and human breast cancer cells MCF-7.

Evaluation of Cytotoxic Effect of Cholesterol End-Capped Poly(N-Isopropylacrylamide)s on Selected Normal and Neoplastic Cells

Purpose

Efficient intracellular delivery of a therapeutic compound is an important feature of smart drug delivery systems (SDDS). Modification of a carrier structure with a cell-penetrating ligand, ie, cholesterol moiety, is a strategy to improve cellular uptake. Cholesterol end-capped poly(N-isopropylacrylamide)s offer a promising foundation for the design of efficient thermoresponsive drug delivery systems.

Methods

A series of cholesterol end-capped poly(N-isopropylacrylamide)s (PNIPAAm) with number-average molar masses ranging from 3200 to 11000 g·mol^–1 were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization from original xanthate-functionalized cholesterol and self-assembled into micelles. The physicochemical characteristics and cytotoxicity of cholesterol end-capped poly(N-isopropylacrylamide)s have been thoroughly investigated.

Results

Phase transition temperature dependence on the molecular weight and hydrophilic/hydrophobic ratio in the polymers were observed in water. Biological test results showed that the obtained materials, both in disordered and micellar form, are non-hemolytic, highly compatible with fibroblasts, and toxic to glioblastoma cells. It was found that the polymer termini dictates the mode of action of the system.

Conclusion

The cholesteryl moiety acts as a cell-penetrating agent, which enables disruption of the plasma membrane and in effect leads to the restriction of the tumor growth. Cholesterol end-capped PNIPAAm showing in vitro anticancer efficacy can be developed not only as drug carriers but also as components of combined/synergistic therapy.

The Efficacy of Cholesterol-Based Carriers in Drug Delivery

Several researchers have reported the use of cholesterol-based carriers in drug delivery. The presence of cholesterol in cell membranes and its wide distribution in the body has led to it being used in preparing carriers for the delivery of a variety of therapeutic agents such as anticancer, antimalarials and antivirals. These cholesterol-based carriers were designed as micelles, nanoparticles, copolymers, liposomes, etc. and their routes of administration include oral, intravenous and transdermal. The biocompatibility, good bioavailability and biological activity of cholesterol-based carriers make them potent prodrugs. Several in vitro and in vivo studies revealed cholesterol-based carriers potentials in delivering bioactive agents. In this manuscript, a critical review of the efficacy of cholesterol-based carriers is reported.

Oxime-based 19-nortestosterone-pheophorbide a conjugate: bimodal controlled release concept for PDT

Photodynamic therapy has become a feasible direction for the treatment of both malignant and non-malignant diseases. It has been in the spotlight since FDA regulatory approval was granted to several photosensitizers worldwide. Nevertheless, there are still strong limitations in the targeting specificity that is vital to prevent systemic toxicity. Here, we report the synthesis and biological evaluation of a novel bimodal oxime conjugate composed of a photosensitizing drug, red-emitting pheophorbide a, and nandrolone (NT), a steroid specifically binding the androgen receptor (AR) commonly overexpressed in various tumors. We characterized the physico-chemical properties of the NT-pheophorbide a conjugate (NT-Pba) and singlet oxygen generation. Because light-triggered therapies have the potential to provide important advances in the treatment of hormone-sensitive cancer, the biological potential of this novel specifically-targeted photosensitizer was assessed in prostatic cancer cell lines in vitro using an AR-positive (LNCaP) and an AR-negative/positive cell line (PC-3). U-2 OS cells, both with and without stable AR expression, were used as a second cell line model. Interestingly, we found that the NT-Pba conjugate was not only photodynamically active and AR-specific, but also that its phototoxic effect was more pronounced compared to pristine pheophorbide a. We also examined the intracellular localization of NT-Pba. Live-cell fluorescence microscopy provided clear evidence that the NT-Pba conjugate localized in the endoplasmic reticulum and mitochondria. Moreover, we performed a competitive localization study with the excess of nonfluorescent NT, which was able to displace fluorescent NT-Pba from the cell interior, thereby further confirming the binding specificity. The oxime ether bond degradation was assayed in living cells by both real-time microscopy and a steroid receptor reporter assay using AR U-2 OS cells. Thus, NT-Pba is a promising candidate for both the selective targeting and eradication of AR-positive malignant cells by photodynamic therapy.

Environmental influences on quality features of Oviductus Ranae in the Changbai Mountains

This work studied the influences of environmental factors on the quality features of Oviductus Ranae. Oviductus Ranae is mainly produced in the Changbai Mountains. The samples of Oviductus Ranae were collected from 24 different locations, which covered the main producing areas. The environmental parameters were assessed using a digital raingauge, GPS, a thermometer, and an atmospheric pressure-altimeter. The quality features including expansion degree, ethanol extract, total water, total ash, and five steroid components, of the collected Oviductus Ranae samples were quantified using high-performance liquid chromatography. The results showed that the cholesterol content in the samples collected from the Yanbian Korean region was slightly higher than the others. Samples collected from the Huadian area exhibited much higher contents of 7-hydroxycholesterol and 7-dehydrocholesterol than the rest of the producing areas. The highest content of cholest-4-en-3-one came from the samples collected from Dandong. The contents of 7-keto-cholesterol in samples from different regions were very close. The highest ethanol extract was from the samples in Tonghua. The correlations between the quality features and environmental factors were analyzed by SPSS (version 25.0, SPSS Inc., Chicago, IL, USA). The results showed that the content of cholest-4-en-3-one was related to the annual average temperature. The total water was correlated with the annual precipitation. 7-Hydroxycholesterol and expansion degree were related to the altitude. The results indicated that environmental factors have certain influences on the quality features.

A sulfonyl hydrazone cholesterol conjugate: gelation, anion interaction and its application in dye adsorption

Cholesterol appended sulfonyl-hydrazone derivative 1 was designed and synthesized as a supramolecular gelator for anionic sensing and dye adsorption. Gelator 1 forms a strong gel in DMSO–H₂O and the morphology of the xerogel shows a tiny rod-like fibrous network. The gel of 1 shows a selective response toward CN⁻ and F⁻ ions causing gel-to-sol transformation. The gel of 1 acts as an efficient matrix for adsorption and removal of anionic dyes such as erythrosine B and uranine from water.