Hinged and Wide: A New P^P Ligand for Emissive [Cu(P^P)(N^N)][PF6] Complexes

Pseudohalide Ions as Ligands to Tune Architecture and Luminescence of Polymetallic CU(I) Assemblies

The reaction of preassembled Cu(I) bimetallic units {Cu2(dppm)2} and {Cu2(dppa)2} (dppm: bis(diphenylphosphino)methane and dppa: bis(diphenylphosphino)amine) with pseudohalide linkers (azido, dicyanamide, and tricyanomethanide) allows for the quantitative and selective preparation of three discrete tetrametallic metallacycles of formula [Cu4(μ2-dppm)4(N3)2](PF6)2, [Cu4(μ2-dppm)4(N(CN)2)2](PF6)2, and [Cu4(μ2-dppm)4(C(CN)3)4]. To explore further the impact of the linker on the architecture and dimensionality of the molecular edifice, the study was extended to more sophisticated tetradentate cyanocarbanion ligands (tcnsMe-: 2-(methylthio)-1,1,3,3-propanetetracarbonitrile and tcnsEt-: 2-(ethylthio)-1,1,3,3-propanetetracarbonitrile). Three ladder-like one-dimensional coordination polymers and an octametallic metallacycle have been obtained. The careful comparison of the metric and geometrical intramolecular and intermolecular parameters observed in this series of seven derivatives allows for rationalization of their molecular architectures. The subtle balance between the length and steric hindrance of the ligand and the formation of noncovalent interaction networks greatly influences the topology and dimensionality of the resulting assemblies and will be discussed hereafter. The photophysical properties of these seven polymetallic Cu(I) compounds have also been also studied.

Strategy for an Effective Eco-Optimized Design of Heteroleptic Cu(I) Coordination Polymers Exhibiting Thermally Activated Delayed Fluorescence

The new series of copper(I) coordination polymers [Cu(N-N)(μ-PTA)]n[PF6]n {N-N = dmbpy (1), bpy (2), ncup (3), and phen (4)} were generated by straightforward reaction in solution or through a mechanochemical route, of [Cu(MeCN)4][PF6] with 1,3,5-triaza-7-phosphaadamantane (PTA) and the corresponding polypyridines, namely, 5,5'-dimethyl-2,2'-bipyridine (dmbpy), 2,2'-bipyridine (bpy), 2,9-dimethyl-1,10-phenanthroline (ncup), and 1,10-phenanthroline (phen). The compounds were obtained as air-stable solids and fully characterized by IR, NMR spectroscopy, and elemental analyses. The molecular structures were confirmed by single-crystal X-ray diffraction analysis (for 1, 2, and 4), revealing infinite one-dimensional (1D) linear chains driven by μ-PTA N,P-linkers. All tested Cu(I) polymeric compounds show emission at room temperature, which was attributed to thermally activated delayed fluorescence (TADF). Evidence of the involvement of the excited singlet state in the emission process is presented. Comparing the photophysical properties of 1 and 2 as well as 3 and 4, of which 1 and 3 have a stiffened structure, by introducing a methyl group to one of the ligands, we demonstrate how TADF properties depend on molecular rigidity. It is shown that stiffening of the structure reduces the flattening distortion around the Cu(I) center in the 3MLCT state. As a result, the ΔE(S1-T1) energy gap becomes smaller and the fluorescence quantum yield increases without significantly extending the emission lifetime. In particular, the ΔE(S1-T1) values for complexes 1 and 3 are among the shortest reported in the scientific literature, 253 and 337 cm-1, and the TADF lifetimes are τ(300 K) = 5.7 and 4.2 μs, respectively. The fluorescence quantum yields for these complexes are measured to be ΦPL(300 K) = 70 and 80%.

Conformationally Preorganized High-Affinity Ligands for Copper Biology with Hinged and Rigid Thiophene Backbones

Copper-selective ligands are essential tools for probing the affinity of cuproproteins or manipulating the cellular copper availability. They also harbor significant potential as antiangiogenic agents in cancer therapy or as therapeutics to combat copper toxicity in Wilson's disease. To achieve the high Cu(I) affinities required for competing effectively with cellular cuproproteins, we recently devised a ligand design based on phosphine-sulfide-stabilized phosphine (PSP) donor motifs. Building on this design strategy, we integrated two PSP donors within preorganized ligand architectures composed of either a hinged bithiophene backbone (bithipPS) or a single rigid thiophene bridge (thipPS). Extensive characterization based on X-ray crystal structures, solution NMR data, spectrophotometric titrations, and electrochemical studies established that bithipPS adapts well to the coordination preferences of Cu(I) to form a discrete air-stable mononuclear Cu(I) complex with a dissociation constant of 4 zM. In contrast, the wider bite angle of thipPS introduces some strain upon Cu(I) coordination to yield an almost 10-fold lower affinity with a Kd of 35 zM. As revealed by ICP-MS and two-photon excitation microscopy studies with the Cu(I)-selective fluorescent probe crisp-17, both ligands are effective at removing cellular copper from live mouse fibroblasts with rapid kinetics. Altogether, the stability and redox properties of PSP-ligand-Cu(I) complexes can be effectively tuned by judicious balancing of their geometrical preorganization and conformational flexibility.

Photoactive Copper Complexes: Properties and Applications

Photocatalyzed and photosensitized chemical processes have seen growing interest recently and have become among the most active areas of chemical research, notably due to their applications in fields such as medicine, chemical synthesis, material science or environmental chemistry. Among all homogeneous catalytic systems reported to date, photoactive copper(I) complexes have been shown to be especially attractive, not only as alternative to noble metal complexes, and have been extensively studied and utilized recently. They are at the core of this review article which is divided into two main sections. The first one focuses on an exhaustive and comprehensive overview of the structural, photophysical and electrochemical properties of mononuclear copper(I) complexes, typical examples highlighting the most critical structural parameters and their impact on the properties being presented to enlighten future design of photoactive copper(I) complexes. The second section is devoted to their main areas of application (photoredox catalysis of organic reactions and polymerization, hydrogen production, photoreduction of carbon dioxide and dye-sensitized solar cells), illustrating their progression from early systems to the current state-of-the-art and showcasing how some limitations of photoactive copper(I) complexes can be overcome with their high versatility.

Quantum simulations of thermally activated delayed fluorescence in an all-organic emitter

We investigate the prototypical NAI-DMAC thermally activated delayed fluorescence (TADF) emitter in the gas phase- and high-packing fraction limits at finite temperature, by combining first principles molecular dynamics with a quantum thermostat to account for nuclear quantum effects (NQE). We find a weak dependence of the singlet-triplet energy gap (ΔE_ST) on temperature in both the solid and the molecule, and a substantial effect of packing. While the ΔE_ST vanishes in the perfect crystal, it is of the order of ∼0.3 eV in the molecule, with fluctuations ranging from 0.1 to 0.4 eV at 300 K. The transition probability between the HOMOs and LUMOs has a stronger dependence on temperature than the singlet-triplet gap, with a desirable effect for thermally activated fluorescence; such temperature effect is weaker in the condensed phase than in the molecule. Our results on ΔE_ST and oscillator strengths, together with our estimates of direct and reverse intersystem crossing rates, show that optimization of packing and geometrical conformation is critical to increase the efficiency of TADF compounds. Our findings highlight the importance of considering thermal fluctuations and NQE to obtain robust predictions of the electronic properties of NAI-DMAC.

TADF: Enabling luminescent copper(i) coordination compounds for light-emitting electrochemical cells

The last decade has seen a surge of interest in the emissive behaviour of copper(i) coordination compounds, both neutral compounds that may have applications in organic light-emitting doides (OLEDs) and copper-based ionic transition metal complexes (Cu-iTMCs) with potential use in light-emitting electrochemical cells (LECs). One of the most exciting features of copper(i) coordination compounds is their possibility to exhibit thermally activated delayed fluorescence (TADF) in which the energy separation of the excited singlet (S₁) and excited triplet (T₁) states is very small, permitting intersystem crossing (ISC) and reverse intersystem crossing (RISC) to occur at room temperature without the requirement for the large spin-orbit coupling inferred by the presence of a heavy metal such as iridium. In this review, we focus mainly in Cu-iTMCs, and illustrate how the field of luminescent compounds and those exhibiting TADF has developed. Copper(i) coordination compounds that class as Cu-iTMCs include those containing four-coordinate [Cu(P^P)(N^N)]⁺ (P^P = large-bite angle bisphosphane, and N^N is typically a diimine), [Cu(P)₂(N^N)]⁺ (P = monodentate phosphane ligand), [Cu(P)(tripodal-N₃)]⁺, [Cu(P)(N^N)(N)]⁺ (N = monodentate N-donor ligand), [Cu(P^P)(N^S)]⁺ (N^S = chelating N,S-donor ligand), [Cu(P^P)(P^S)]⁺ (P^S = chelating P,S-donor ligand), [Cu(P^P)(NHC)]⁺ (NHC = N-heterocyclic carbene) coordination domains, dinuclear complexes with P^P and N^N ligands, three-coordinate [Cu(N^N)(NHC)]⁺ and two-coordinate [Cu(N)(NHC)]⁺ complexes. We pay particular attention to solid-state structural features, e.g. π-stacking interactions and other inter-ligand interactions, which may impact on photoluminescence quantum yields. Where emissive Cu-iTMCs have been tested in LECs, we detail the device architectures, and this emphasizes differences which make it difficult to compare LEC performances from different investigations.

The Role of Percent Volume Buried in the Characterization of Copper(I) Complexes for Lighting Purposes

The usefulness of percent volume buried (%V_bur) as a readily quantifiable property is investigated with regard to [Cu(NN)(PP)]⁺ complexes of interest for lighting purposes. Photoluminescence quantum yields (PLQYs) and single crystal X-ray structures of 100 reported compounds were assembled, %V_bur of the ligand systems were calculated and analyzed for correlations. We found that increased shielding of the central Cu(I) cation relying on shared contributions of both (NN) and (PP) ligand systems led to increased PLQYs. These findings are of relevance for future characterizations of Cu(I)-based complexes and their photophysical behavior in the solid-state.

The shiny side of copper: bringing copper(i) light-emitting electrochemical cells closer to application

Heteroleptic [Cu(P^P)(N^N)][PF₆] complexes, where N^N is 5,5′-dimethyl-2,2′-bipyridine (5,5′-Me₂bpy), 4,5,6-trimethyl-2,2′-bipyridine (4,5,6-Me₃bpy), 6-(tert-butyl)-2,2′-bipyridine (6-tBubpy) and 2-ethyl-1,10-phenanthroline (2-Etphen) and P^P is either bis(2-(diphenylphosphino)phenyl)ether (POP, PIN [oxydi(2,1-phenylene)]bis(diphenylphosphane)) or 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene (xantphos, PIN (9,9-dimethyl-9H-xanthene-4,5-diyl)bis(diphenylphosphane)) have been synthesized and their NMR spectroscopic, mass spectrometric, structural, electrochemical and photophysical properties were investigated. The single-crystal structures of [Cu(POP)(5,5′-Me₂bpy)][PF₆], [Cu(xantphos)(5,5′-Me₂bpy)][PF₆], [Cu(POP)(6-tBubpy)][PF₆], [Cu(POP)(4,5,6-Me₃bpy)][PF₆]·1.5Et₂O, [Cu(xantphos)(4,5,6-Me₃bpy)][PF₆]·2.33CH₂Cl₂, [Cu(POP)(2-Etphen)][PF₆] and [Cu(xantphos)(2-Etphen)][PF₆] are described. While alkyl substituents in general exhibit electron-donating properties, variation in the nature and substitution-position of the alkyl group in the N^N chelate leads to different effects in the photophysical properties of the [Cu(P^P)(N^N)][PF₆] complexes. In the solid state, the complexes are yellow to green emitters with emission maxima between 518 and 602 nm, and photoluminescence quantum yields (PLQYs) ranging from 1.1 to 58.8%. All complexes show thermally activated delayed fluorescence (TADF). The complexes were employed in the active layer of light-emitting electrochemical cells (LECs). The device performance properties are among the best reported for copper-based LECs, with maximum luminance values of up to 462 cd m⁻² and device half-lifetimes of up to 98 hours.

Heteroleptic copper(i) complexes with bisphosphanes and astutely tuned N^N chelating ligands as emitters give bright LECs with record-breaking stability.

Synthesis and Characterization of Three New Emissive Mononuclear CuI Heteroleptic Complexes with Functionalized 6-Cyano-2,2′-bipyridine Chelating Ligands

A new series of luminescent mononuclear CuI complexes with functionalized 6-cyano-2,2′-bipyridine chelating ligands, [Cu(xantphos)(cbpy)]ClO4 (1), [Cu(xantphos)(4,4’-Me2cbpy)]ClO4·CH2Cl2·H2O (2), and [Cu(POP)(cbpy)]ClO4·CH2Cl2 (3) (xantphos=4,5-bis(diphenylphosphino)-9,9-dimethylxanthene; POP=bis(2-diphenylphosphinophenyl)ether; 4,4’-Me2cbpy=4,4’-dimethyl-6-cyano-2,2′-bipyridine; cbpy=6-cyano-2,2′-bipyridine) have been successfully prepared, and their structures and photophysical properties are investigated. Single crystal structures of the three complexes reveal a distorted tetrahedral coordination geometry around the CuI centres with the P atoms of diphosphane ligands and N donors of 2,2′-bipyridine ring. Luminescence measurements indicate that these CuI complexes display good emission properties both in the solution and solid states at room temperature, which can be well modulated through modifying the structure of 6-cyano-2,2′-bipyridine. It is shown that the introduction of two electron-donating methyl groups at the 4,4’-positions of the 6-cyano-2,2′-bipyridine is favourable to enhance the luminescence properties of the CuI complexes.