Food-Grade Nanoemulsions: Preparation, Stability and Application in Encapsulation of Bioactive Compounds

Emulsions vs excipient emulsions as α-tocopherol delivery systems: Formulation optimization and behaviour under in vitro digestion

Oil-in-water emulsions (EM) have been extensively used for the encapsulation of lipophilic bioactive compounds and posterior incorporation into food matrices to obtain functional foods. Conversely, novel excipient oil-in-water emulsions (EXC) present identical composition and structure as EM, albeit are not bioactive by themselves since no bioactive compound is encapsulated. Instead, EXC aims at improving the bioavailability of foods' natural bioactive compounds upon co-ingestion with nutrient-rich foods. In this work, EM and EXC were produced and their stability and functionality as delivery systems for α-tocopherol compared. Emulsions were formulated with corn oil and lecithin, and their composition was optimized using experimental designs. Formulations produced with 3 % lecithin and 5 % oil attained smallest particles sizes with the lowest polydispersity index of all tested formulations and remained stable up to 60 days. Encapsulation of α-tocopherol did not have a significative impact on the structural properties of the particles produced with the same composition. α-tocopherol stability during in vitro digestion was superior in EM regardless the processing methodology (EM stability < 50 %, EXC stability < 29 %), indicating that EM offered greater protection against the digestive environment. α-tocopherol's bioaccessibility was significantly increased when encapsulated or when digested with added excipient emulsions (82-92 % and 87-90 % for EM and EXC, respectively). In conclusion, EM were more efficient vehicles for the selected bioactive compound, however, the good results obtained with EXC imply that excipient emulsions have a great potential for applications on foods to improve their natural bioactive compounds' bioavailability without the need of further processing.

Physical and biological properties of alginate-based cinnamon essential oil nanoemulsions: Study of two different production strategies

Nanoemulsions are a promising alternative for essential oil incorporation into active coatings. The influence of the preparation steps order on nanoemulsions' physical properties is still little explored. This study aimed to analyze the effect of the sequence of preparation steps and of the oil and polymer concentration on the stability, physical properties, and antifungal activity of alginate-based cinnamon essential oil nanoemulsions. The nanoemulsions were produced by two strategies: (I) preparation directly into an alginate solution (Ultra-Turrax at 10,000 rpm for 5 min + Ultrasound 150 W for 3 min); and (II) preparation in water (Ultra-Turrax at 10,000 rpm for 5 min + Ultrasound 150 W for 3 min) followed by homogenization with a sodium alginate solution (Ultra-Turrax at 10,000 rpm for 1, 3 or 5 min). The nanoemulsion prepared by the second strategy showed better stability, physical properties, and antifungal activity. In general, the presence of alginate hindered the cavitation effects of ultrasound, leading to the increase of droplets size and consequently affecting emulsions stability, turbidity, and antifungal properties.

Evaluating the Stability and Digestibility of Long-Chain Omega-3 Algal Oil Nanoemulsions Prepared with Lecithin and Tween 40 Emulsifiers Using an In Vitro Digestion Model

The health benefits of long-chain omega-3 polyunsaturated fatty acid (LCn-3PUFA) intake have been well documented. However, currently, the consumption of oily fish (the richest dietary source of LCn-3PUFA) in the UK is far below the recommended level, and the low digestibility of LCn-3PUFA bulk oil-based supplements from triglyceride-based sources significantly impacts their bioavailability. LCn-3PUFA-rich microalgal oil offers a potential alternative for populations who do not consume oily fish, and nanoemulsions have the potential to increase LCn-3PUFA digestibility and bioavailability. The aims of this study were to produce stable algal oil-in-water nanoemulsions with ultrasonic technology to increase DHA digestibility, measured using an in vitro digestion model. A nanoemulsion of LCn-3PUFA algal oil was developed with 6% w/w emulsifiers: lecithin (LE) or an equal ratio of Tween 40 (3%) and lecithin (LTN) (3%), 50% w/w, algal oil and 44% w/w water using rotor-stator and ultrasound homogenization. The in vitro digestion experiments were conducted with a gastric and duodenal digestion model. The results showed the creation of nanoemulsions of LCn-3PUFA algal oils offers potentially significant increases in the bioavailability of DHA in the human body. The increase in digestibility can be attributed to the smaller particle size of the nanoemulsions, which allows for higher absorption in the digestive system. This showed that the creation of nanoemulsions of LCn-3PUFA algal oils offers a potentially significant increase in the bioavailability of DHA in the human body. The LE and LTN nanoemulsions had average droplet sizes of 0.340 ± 0.00 µm and 0.267 ± 0.00 µm, respectively, but the algal oil mix (sample created with same the components as the LTN nanoemulsion, hand mixed, not processed by rotor-stator and ultrasound homogenization) had an average droplet size of 73.6 ± 6.98 µm. The LTN algal oil nanoemulsion was stable in the gastric and duodenal phases without detectable destabilization; however, the LE nanoemulsion showed signs of oil phase separation in the gastric phase. Under the same conditions, the amount of DHA digested from the LTN nanoemulsion was 47.34 ± 3.14 mg/g, compared to 16.53 ± 0.45 mg/g from the algal oil mix, showing DHA digestibility from the LTN nanoemulsion was 2.86 times higher. The findings of this study contribute to the insight of in vitro DHA digestion under different conditions. The stability of the LTN nanoemulsion throughout digestion suggests it could be a promising delivery system for LCn-3PUFAs, such as DHA, in various food and pharmaceutical applications.

Mapping deterioration in electrospun zein nonwoven nanostructures encapsulating corn oil

Electrospun nonwovens of biopolymers are gaining popularity in filtration, coatings, encapsulation, and packaging materials. However, their applications are hindered by limited stability, particularly when loaded with lipids. This research aimed to apply a multiscale approach to gain insights into deteriorative processes, e.g., oxidation, limiting the shelf life of these complex materials, using corn oil-loaded electrospun zein nonwovens as a model system. Oil-doped zein electrospun nonwovens were stored in the dark at 23 °C and 33% relative humidity for 28 days and tested at selected intervals to monitor their morphology and mechanical properties. Lipid oxidation was assessed using the thiobarbituric acid reactive species (TBARS) assay. The photophysical properties of intrinsic, i.e., tyrosine (Tyr), and extrinsic, i.e., boron-dipyrromethene undecanoic acid 581/591 (BODIPY C11), lumiphores were also monitored to evaluate changes in local molecular rigidity, and oxidation, respectively. The protein secondary structure was determined with Fourier transform infrared spectroscopy (FTIR). Scanning electron microscopy (SEM) analysis of the oil-loaded electrospun nonwovens revealed that the diameter of the ribbon-like fiber significantly decreased during storage from 701 ± 23 nm to 620 ± 44 nm. Breakage of the electrospun fibers was observed and correlated with increased brittleness and molecular rigidity of the nonwoven material, reflected by an increase in Tyr emission intensity and phosphorescence lifetime. Changes in tensile strength, brittleness and matrix rigidity also correlated with a zein secondary structure transition from unordered to ordered β-sheets. Raman and luminescence micrographs showed oil migration during storage, thereby increasing lipid oxidation. The correlation between local rigidity and lipid distribution/oxidation suggests that reorganizing protein structures increased material brittleness and displaced encapsulated oils within the electrospun fiber. Understanding deteriorative mechanisms aids in developing innovative strategies to improve the stability of these novel food-grade materials.

Spontaneous nanoemulsification of cinnamon essential oil: Formulation, characterization, and antibacterial and antibiofilm activity against fish spoilage caused by Serratia rubidaea BFMO8

The contemporary food industry's uses of nanoemulsions (NEs) include food processing, effective nutraceutical delivery, the development of functional chemicals, and the synthesis of natural preservatives, such as phytocompounds. Although cinnamon essential oil (CEO) is widely used in the cosmetic, pharmaceutical, and food industries, it is difficult to add to aqueous-based food formulations due to its weak stability and poor water solubility. This study describes the formulation of a CEO nanoemulsion (CEONE) by spontaneous emulsification and evaluates its antibacterial and antibiofilm properties against biofilm-forming Serratia rubidaea BFMO8 isolated from spoiled emperor fish (Lethrinus miniatus). Bacteria causing spoilage in emperor fish were isolated and identified as S. rubidaea using common morphological, cultural, and 16S RNA sequencing methods, and their ability to form biofilms and their susceptibility to CEONE were assessed using biofilm-specific methods. The spontaneous emulsification formulation of CEONE was accomplished using water and Tween 20 surfactant by manipulating organic and aqueous phase interface properties and controlling particle growth by capping surfactant increases. The best emulsification, with highly stable nano-size droplets, was accomplished at 750 rpm and a 1:3 ratio concentration. The stable CEONE droplet size, polydispersity index, and zeta potential values were 204.8 nm, 0.115, and -6.05 mV, respectively. FTIR and high-resolution liquid chromatography-mass spectrometry (HR-LCMS) analyses have revealed carboxyl, carbonyl, and phenol-like primary phytochemical functional groups in CEO and CEONE, which contribute to their antibacterial and antibiofilm properties.

Recent progress on Pickering emulsion stabilized essential oil added biopolymer-based film for food packaging applications: A review

Nowadays food safety and protection are a growing concern for food producers and food industry. The stability of food-grade materials is key in food processing and shelf life. Pickering emulsions (PEs) have gained significant attention in food regimes owing to their stability enhancement of food specimens. PE can be developed by high and low-energy methods. The use of PE in the food sector is completely safe as it uses solid biodegradable particles to stabilize the oil in water and it also acts as an excellent carrier of essential oils (EOs). EOs are useful functional ingredients, the inclusion of EOs in the packaging film or coating formulation significantly helps in the improvement of the shelf life of the packed food item. The highly volatile nature, limited solubility and ease of oxidation in light of EOs restricts their direct use in packaging. In this context, the use of PEs of EOs is suitable to overcome most of the challenges, Therefore, recently there have been many papers published on PEs of EOs including active packaging film and coatings and the obtained results are promising. The current review amalgamates these studies to inform about the chemistry of PEs followed by types of stabilizers, factors affecting the stability and different high and low-energy manufacturing methods. Finally, the review summarizes the recent advancement in PEs-added packaging film and their application in the enhancement of shelf life of food.

Transforming Medicinal Oil into Advanced Gel: An Update on Advancements

The present study delves into the evolution of traditional Ayurvedic oil preparations through innovative strategies to develop advanced gel formulations, aiming at amplifying their therapeutic efficacy. Ayurvedic oils have a rich historical context in healing practices, yet their conversion into contemporary gel-based formulations represents a revolutionary approach to augment their medicinal potential. The primary objective of this transformation is to leverage scientific advancements and modern pharmaceutical techniques to enhance the application, absorption, and overall therapeutic impact of these traditional remedies. By encapsulating the essential constituents of Ayurvedic oils within gel matrices, these novel strategies endeavor to improve their stability, bioavailability, and targeted delivery mechanisms. This review highlights the fusion of traditional Ayurvedic wisdom with cutting-edge pharmaceutical technology, paving the way for more effective and accessible utilization of these revered remedies in modern healthcare.

The present state and future outlook of pectin-based nanoparticles in the stabilization of Pickering emulsions

The stabilization of Pickering emulsions using micro/nanoparticles has gained significant attention due to their wide range of potential applications in industries such as cosmetics, food, catalysis, tissue engineering, and drug delivery. There is a growing demand for the development of environmentally friendly micro/nanoparticles to create stable Pickering emulsions. Naturally occurring polysaccharides like pectin offer promising options as they can assemble at oil/water interfaces. This polysaccharide is considered a green candidate because of its biodegradability and renewable nature. The physicochemical properties of micro/nanoparticles, influenced by fabrication methods and post-modification techniques, greatly impact the characteristics and applications of the resulting Pickering emulsions. This review focuses on recent advancements in Pickering emulsions stabilized by pectin-based micro/nanoparticles, as well as the application of functional materials in delivery systems, bio-based films and 3D printing using these emulsions as templates. The effects of micro/nanoparticle properties on the characteristics of Pickering emulsions and their applications are discussed. Additionally, the obstacles that currently hinder the practical implementation of pectin-based micro/nanoparticles and Pickering emulsions, along with future prospects for their development, are addressed.

Green Preparation and Antibacterial Activity Evaluation of AgNPs-Blumea balsamifera Oil Nanoemulsion

Bacterial infection is a thorny problem, and it is of great significance to developing green and efficient biological antibacterial agents that can replace antibiotics. This study aimed to rapidly prepare a new type of green antibacterial nanoemulsion containing silver nanoparticles in one step by using Blumea balsamifera oil (BBO) as an oil phase and tea saponin (TS) as a natural emulsifier and reducing agent. The optimum preparation conditions of the AgNPs@BBO-TS NE were determined, as well as its physicochemical properties and antibacterial activity in vitro being investigated. The results showed that the average particle size of the AgNPs@BBO-TS NE was 249.47 ± 6.23 nm, the PDI was 0.239 ± 0.003, and the zeta potential was -35.82 ± 4.26 mV. The produced AgNPs@BBO-TS NE showed good stability after centrifugation and 30-day storage. Moreover, the AgNPs@BBO-TS NE had an excellent antimicrobial effect on Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. These results demonstrated that the AgNPs@BBO-TS NE produced in this study can be used as an efficient and green antibacterial agent in the biomedical field.

Validating the protective role of orange and tangerine peel extracts foramending food safety against microorganisms' contamination using molecular docking

Latest studies indicated that agro-food wastes are considered renewable sources of bioactive compounds. This investigation aimed to utilize natural extracts of citrus peels as antimicrobial and anti-aflatoxigenic agents for food safety. The bioactivity of two citrus peels was assessed by total phenolic, flavonoids, and antioxidant activity. Nanoemulsions were manufactured using high-speed homogenization. The mean particle size of the nanoemulsions ranged from 29.41 to 66.41 nm with a polydispersity index of 0.11-0.16. The zeta potential values ranged from -14.27 to -26.74 mV, indicating stability between 81.44% and 99.26%. The orange peel extract showed the highest contents of total phenolic and flavonoids compared to the other extracts and nanoemulsions (39.54 mg GAE/g and 79.54 mg CE/100 g, respectively), which agreed with its potential antioxidant activity performed by DPPH free radical-scavenging and ABTS assays. Chlorogenic, caffeic, ferulic, and catechin were the dominant phenolic acids in the extracts and nanoemulsions, while quercitrin, rutin, and hesperidin were the most abundant flavonoids. Limonene was the major volatile component in both oils; however, it was reduced dramatically from 92.52% to 76.62% in orange peel oil and from 91.79 to 79.12% in tangerine peel oil. Consistent with the differences in phenolics, flavonoids, and volatiles between orange and tangerine peel extracts, the antibacterial properties of orange extracts had more potential than tangerine ones. Gram-positive bacteria were more affected by all the examined extracts than Gram-negative ones. The antifungal activity of orange extract and nanoemulsion on seven fungal strains from Aspergillus spp had more potential than tangerine extracts. Additionally, using a simulated media, the orange peel extract and its nanoemulsion had a more anti-aflatoxigenic influence. Molecular docking confirmed the high inhibitory action of flavonoids, especially hesperidin, on the polyketide synthase (-9.3 kcal/mol) and cytochrome P450 monooxygenase (-10.1 kcal/mol) key enzymes of the aflatoxin biosynthetic mechanism.

Recent developments in the fabrication of food microparticles and nanoparticles using microfluidic systems

Microfluidics is revolutionizing the production of microparticles and nanoparticles, offering precise control over dimensions and internal structure. This technology facilitates the creation of colloidal delivery systems capable of encapsulating and releasing nutraceuticals. Nutraceuticals, often derived from food-grade ingredients, can be used for developing functional foods. This review focuses on the principles and applications of microfluidic systems in crafting colloidal delivery systems for nutraceuticals. It explores the foundational principles behind the development of microfluidic devices for nutraceutical encapsulation and delivery. Additionally, it examines the prospects and challenges with using microfluidics for functional food development. Microfluidic systems can be employed to form emulsions, liposomes, microgels and microspheres, by manipulating minute volumes of fluids flowing within microchannels. This versatility can enhance the dispersibility, stability, and bioavailability of nutraceuticals. However, challenges as scaling up production, fabrication complexity, and microchannel clogging hinder the widespread application of microfluidic technologies. In conclusion, this review highlights the potential role of microfluidics in design and fabrication of nutraceutical delivery systems. At present, this technology is most suitable for exploring the role of specific delivery system features (such as particle size, composition and morphology) on the stability and bioavailability of nutraceuticals, rather than for large-scale production of nutraceutical delivery systems.

Application of Nanoparticles in Human Nutrition: A Review

Nanotechnology in human nutrition represents an innovative advance in increasing the bioavailability and efficiency of bioactive compounds. This work delves into the multifaceted dietary contributions of nanoparticles (NPs) and their utilization for improving nutrient absorption and ensuring food safety. NPs exhibit exceptional solubility, a significant surface-to-volume ratio, and diameters ranging from 1 to 100 nm, rendering them invaluable for applications such as tissue engineering and drug delivery, as well as elevating food quality. The encapsulation of vitamins, minerals, and antioxidants within NPs introduces an innovative approach to counteract nutritional instabilities and low solubility, promoting human health. Nanoencapsulation methods have included the production of nanocomposites, nanofibers, and nanoemulsions to benefit the delivery of bioactive food compounds. Nutrition-based nanotechnology and nanoceuticals are examined for their economic viability and potential to increase nutrient absorption. Although the advancement of nanotechnology in food demonstrates promising results, some limitations and concerns related to safety and regulation need to be widely discussed in future research. Thus, the potential of nanotechnology could open new paths for applications and significant advances in food, benefiting human nutrition.

Investigating the Wound-Healing Potential of a Nanoemulsion-Gel Formulation of Pituranthos tortuosus Essential Oil

This study explores a nanoemulsion (NE)-based gel incorporating Tunisian Pituranthos tortuosus essential oil, with a focus on its wound-healing potential. The essential oil, extracted via hydrodistillation, underwent GC-MS analysis for compositional verification. The physicochemical characterization included dynamic light scattering (DLS), transmission electron microscopy (TEM), zeta potential measurement, pH, and viscosity. The gelification of the NE facilitated topical application. The results revealed an average extraction yield of 0.45% and identified 38 compounds in the essential oil. The NE exhibited a particle size of 27 ± 0.4 nm, a polydispersity index (PDI) of 0.3, and a zeta potential of -22.8 ± 1.4 mV. The stability of the gelified preparation was confirmed through thermodynamic stability studies, TEM observations, and zeta and size results. In vivo experiments confirmed significant wound-healing effects, highlighting the promising role of the NE-based gel in healthcare advancements. This research underscores the potential of novel phyto-based delivery systems in wound care.

Long-Term Stability of Lavandula x intermedia Essential Oil Nanoemulsions: Can the Addition of the Ripening Inhibitor Impact the Biocidal Activity of the Nanoformulations?

In this work, Lavandula x intermedia essential oil (LEO) was encapsulated in lipid-based nanoemulsions (NanoLEO) using the solvent-displacement technique. In order to preserve the colloidal stability of the formulation, LEO was appropriately doped with the incorporation of different levels of a water-insoluble oil used as a ripening inhibitor. All the nanoemulsion samples were evaluated in terms of the impact of the water-insoluble oil on the nanoemulsion formation, physical-chemical properties, and antibacterial effectiveness against E. coli (Gram-negative) and B. cereus (Gram-positive). The presence of the inert oil added benefits to the formulations in terms of appearance, colloidal stability, and loss of volatile components. However, the antimicrobial activity of the nanoemulsions dramatically decreased with the ripening inhibitor addition, probably because it hampered the internalization of the antimicrobial components of LEO within the bacterial cell membranes, thus nullifying the delivery ability of the nanoemulsion formulation. On the contrary, the undoped NanoLEO formulation showed unaltered antibacterial activity in both E. coli and B. cereus up to 40 weeks from the preparation.

Nanoemulsion based edible coatings for quality retention of fruits and vegetables-decoding the basics and advancements in last decade

Fruits and vegetables (F&V) are highly perishable and have important contributions to nutritional and economic sustainability. Although the developing nations have shown an immense increase in the production of horticultural commodities, the post-harvest losses are significant and have an adverse impact on the resources, economy, and environment as well. Nanoemulsion-based carriers are recognized for their diversity, natural origin, and immense potential to restrict losses while boosting the functional attributes of produce. The recent findings attest to nanoemulsions potential for extending the shelf life, managing quality, and reducing the losses of the perishables for sustainable livelihood of the farmers. However, further studies are required to evaluate the biological fate, safety, or potential toxicity of the nanoemulsion-based edible coatings. This review precisely focuses on various matrices used in the production of nanoemulsions, fabrication methods, characterization techniques, and the use of natural emulsifiers instead of chemicals. The future research focus stresses on developing low-cost fabrication techniques for nanoemulsion, improvement of the transmission properties i. e gas transmission rate (GTR), water vapor transmission rate (WVTR), and enhancing the performance of monolayer, bilayer, and other composite nanoemulsion base films. This beyond reducing the postharvest losses shall also restrict burden of the food waste management and related environmental issues at the same time.

Advances in Designing Essential Oil Nanoformulations: An Integrative Approach to Mathematical Modeling with Potential Application in Food Preservation

Preservation of foods, along with health and safety issues, is a growing concern in the current generation. Essential oils have emerged as a natural means for the long-term protection of foods along with the maintenance of their qualities. Direct applications of essential oils have posed various constraints to the food system and also have limitations in application; hence, encapsulation of essential oils into biopolymers has been recognized as a cutting-edge technology to overcome these challenges. This article presents and evaluates the strategies for the development of encapsulated essential oils on the basis of fascination with the modeling and shuffling of various biopolymers, surfactants, and co-surfactants, along with the utilization of different fabrication processes. Artificial intelligence and machine learning have enabled the preparation of different nanoemulsion formulations, synthesis strategies, stability, and release kinetics of essential oils or their bioactive components from nanoemulsions with improved efficacy in food systems. Different mathematical models for the stability and delivery kinetics of essential oils in food systems have also been discussed. The article also explains the advanced application of modeling-based encapsulation strategies on the preservation of a variety of food commodities with their intended implication in food and agricultural industries.

Polysaccharide-based films: from packaging materials to functional food

A wider application of naturally derived polysaccharides is of great interest as materials for food packaging industry. Biocompatibility and biodegradability of polysaccharide-based films and coatings ally with a shift from application of non-biodegradable petrochemical polymers to the more environmentally friendly ones. Due to a range of inherent features in chemical structure and bioactivity, the polysaccharide materials could bring additional functionality to food packaging. The chelating ability of the polysaccharides provides also their application as carriers of additional active components, such as nanoparticles, essential oils and polyphenols. The improved physicochemical, antibacterial and antioxidant properties of the filled films allows to consider the edible polysaccharide-based films as functional food products. This review is aimed at analysis of evolution of polysaccharide-based food packaging materials from inert one starting from cellophane to recent research works on development of multicomponent polysaccharide-based functional food films and coatings.

Attenuation of celecoxib cardiac toxicity using Poly(δ-decalactone) based nanoemulsion via oral route

Celecoxib (CLX), a poorly soluble anti-inflammatory drug, requires administration in higher concentrations to produce therapeutic effects, oftentimes resulting in cardiac toxicity. Therefore, in this study, we employed a nanoemulsion technology to improve the solubility of CLX using poly(δ-decalactone) (PDL) polymer as an oil and mPEG-b-PDL as a surfactant. The nanoemulsion (NE) was successfully prepared via the nanoprecipitation method. In vitro characterization was performed for size, drug release, and stability. In vivo studies were performed to establish anti-inflammatory activity, CLX induced cardiac toxicity, and pharmacokinetic profile of NE, post-oral administration. The globular size of less than 100 nm was obtained in NE with high CLX loading. The in vitro drug release studies suggested ∼90% of CLX release from NE within 96 h. A significant anti-inflammatory activity with lowered cardiac marker values was observed for CLX NE compared to a marketed drug formulation. The pharmacokinetic study revealed that the mean retention time of CLX was significantly increased with NE in contrast to the marketed formulation, suggesting the advantage of administering CLX in the form of NE owing to the higher solubility and sustained release pattern. The long-term storage stability study reveals that NE does not show significant changes in terms of size with only a slight decrement in CLX content was observed after 24 months. The obtained results indicate that CLX bioavailability has been considerably improved without being toxic to the heart with the aid of NE and advocate the use of PDL NE for developing oral formulations for poorly soluble drugs.

Effects of Quercetin Nanoemulsion on Cholesterol Efflux and MicroRNA-33/34a Expression in the Liver of Mice Fed with a High-Cholesterol Diet

Quercetin is a flavonoid widely present in plants; despite its beneficial physiological activity, it exhibits considerably low bioavailability. Nanoemulsion technology is used for improving the bioavailability of lipophilic phenolic compounds. This study aimed to investigate the potential effects of quercetin nanoemulsion (QN) on regulating the microRNA (miR)-33/34a pathway involved in cholesterol efflux in the liver of mice fed with a high-cholesterol (HC) diet. Subsequently, C57BL/6J mice were divided into four groups and fed a normal chow diet, HC diet supplemented with 1% cholesterol and 0.5% cholic acid, or HC diet supplemented with 0.05% QN or 0.1% QN for 6 weeks. Serum and hepatic lipid profiles were assayed using commercial enzymatic kits. Gene expression and miR levels were quantified using real-time quantitative reverse transcription polymerase chain reaction, and adenosine monophosphate-activated protein kinase (AMPK) activity was measured using an AMPK Kinase Assay kit. QN supplementation improved serum and liver lipid profiles. QN upregulated the mRNA levels of adenosine triphosphate (ATP)-binding cassette subfamily A1, ATP-binding cassette subfamily G1, and scavenger receptor class B type 1, which are related to cholesterol efflux. In the QN group, the hepatic AMPK activity increased, whereas miR-33, and miR-34a expression levels decreased. These results suggest that QN may enhance cholesterol efflux, at least partly through modulating AMPK activity and miR-33/34a expression in the liver.

Anti-MRSA and Biological Activities of Propolis Concentrations Loaded to Chitosan Nanoemulsion for Pharmaceutics Applications

Propolis is a naturally occurring substance with beneficial properties; bees produce it from various plant sources, and it is an anti-inflammatory and therapeutic resinous substance. This study aimed to enhance the biological features of propolis extract by loading it onto active film. Firstly, extraction was performed using three solvent systems, and their total phenolic, flavonoid, and antioxidant activity was measured. Propolis ethanol extract (EEP) was evaluated for phenolic fraction content and then chosen to prepare a chitosan-loaded emulsion with several concentrations. The antibacterial, anti-mycotic, and anti-mycotoxigenic properties of the extract and nanoemulsion were assessed. PPE's cytotoxicity and nanoemulsion were evaluated using brine shrimp and cell line assays. Results indicate higher phenolic (322.57 ± 4.28 mg GAE/g DW), flavonoid (257.64 ± 5.27 mg QE/g DW), and antioxidant activity of the EEP. The phenolic fraction is distinguished by 18 phenolic acids with high p-hydroxybenzoic content (171.75 ± 1.64 µg/g) and 12 flavonoid compounds with high pinocembrin and quercetin content (695.91 ± 1.76 and 532.35 ± 1.88 µg/g, respectively). Phenolic acid derivatives (3,4-Dihydroxybenzaldehyde, 3,4-Dihydroxyphenol acetate, and di-methoxy cinnamic) are also found. Concentrations of 50, 100, 150, and 200 ng EEP loaded on chitosan nanoemulsion reflect significant antibacterial activity against pathogenic bacteria, particularly methicillin-resistant Staphylococcus aureus (MRSA) and toxigenic fungi, particularly Fusarium. Among the four EEP-loaded concentrations, the nanoemulsion with 150 ng showed outstanding features. Using a simulated medium, 150 and 200 ng of EEP-loaded chitosan nanoemulsion concentrations can stop zearalenone production in Fusarium media with complete fungi inhibition. Also, it reduced aflatoxins production in Aspergillus media, with fungal inhibition (up to 47.18%). These results recommended the EEP-chitosan application for pharmaceutics and medical use as a comprehensive wound healing agent.

Recent Advances in Lycopene for Food Preservation and Shelf-Life Extension

In recent years, there has been increasing concern about the safety of additives used to extend the shelf-life of food products. As a result, lycopene, a natural phytochemical compound, has attracted attention, as it has been demonstrated to be a potential alternative to traditional artificial antioxidants, with significant health benefits when applied to food preservation. Based on this, this review introduces the specific forms of lycopene currently used as an antioxidant in foods, both in its naturally occurring forms in fruits and vegetables and in artificially added forms involving technologies such as composite coating, active film packaging, emulsion, and microcapsules. In addition, it also provides a comprehensive summary of the effects and progress of lycopene in the preservation of different types of food products, such as meat, seafood, oil, dairy products, fruits, and vegetables, in the last decade. At last, it also points out the limitations of lycopene, including its insolubility in water, dark color, and high sensitivity to heat or light, as well as the potential solutions to load lycopene on suitable carriers, such as combining lycopene with antimicrobial substances or other actives, in order to broaden its applications as an antioxidant in future foods.

Fabrication and Biological Activities of All-in-One Composite Nanoemulsion Based on Blumea balsamifera Oil-Tea Tree Oil

Nanoemulsion is a new multi-component drug delivery system; the selection of different oil phases can give it special physiological activity, and play the role of "medicine and pharmaceutical excipients all-in-one". In this paper, we used glycyrrhizic acid as the natural surfactant, and Blumea balsamifera oil (BB) and tea tree oil (TTO) as the mixed oil phase, to obtain a new green functional composite nanoemulsion. Using the average particle size and polydispersion index (PDI) as the evaluation criteria, the effects of the oil ratio, oil content, glycyrrhizic acid concentration, and ultrasonic time on the nanoemulsion were systematically investigated. The stability and physicochemical properties and biological activities of BB-TTO NEs prepared via the optimum formulation were characterized. The optimal prescription was BB: TTO = 1:1, 5% oil phase, 0.7% glycyrrhizic acid, and 5 min ultrasonication time. The mean particle size, PDI, and zeta potential were 160.01 nm, 0.125, and -50.94 mV, respectively. The nanoemulsion showed non-significant changes in stability after centrifugation, dilution, and 120 days storage. These nanoemulsions were found to exhibit potential antibacterial and anti-inflammatory activities. The minimal inhibitory concentration (MIC) of BB-TTO NEs against Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa is 2975 μg/mL, 2975 μg/mL, and 5950 μg/mL, respectively. A lower level of inflammatory cell infiltration and proportion of fibrosis were found in the synovial tissue of AIA rats treated with BB-TTO NEs. These findings demonstrate that the BB-TTO NEs produced in this study have significant potential for usage in antibacterial and anti-inflammatory areas.

Recent Update on Nanoemulsion Impregnated Hydrogel: a Gleam into the Revolutionary Strategy for Diffusion-Controlled Delivery of Therapeutics

Since earlier times, dermatological remedies have been utilized to treat diseases associated with pain, irritation, and skin conditions. Compared to other routes of drug delivery, topical delivery of drugs offers several benefits. Scientists are investigating different alterations in dosage forms in addition to existing topical formulations such as ointments, gels, creams, lotions, and ointments to significantly improve the permeation of drugs and enhance the pharmacological efficacy of medications that are poorly absorbed via the skin. Conventional formulations have a plethora of problems viz. poor absorption, no target specificity, low spreadability, and inadequate bioavailability which leads the researchers toward developing novel formulations like nanoemulsions. The nanoemulsion can enhance the gradient in concentration and thermodynamic movement toward the epidermis and enhance the penetration of its constituents. However, due to its difficult application, nanoemulsion's lower viscosity limited its use in transdermal delivery. Thus, the development of nanoemulsion-based hydrogels has shown to be a successful strategy for removing obstacles from existing drug formulations. The simple application, expedient spreadability, non-stickiness, safety, and effectiveness of nanoemulsion-based hydrogel have led to substantial growth in their research in recent years. This review gives a brief idea about the prevalence of skin diseases, skin as an obstacle for drug delivery, and recent research insights to combat these obstacles. The work highlights the mechanism of drug release via nanoemulsion, hydrogels, and nanoemulsion-based hydrogels with reference to recent research on hydrophobic and hydrophilic drugs.

Recent insights into Nanoemulsions: Their preparation, properties and applications

The ever-increasing demand for healthy diet by consumers has prompted the research adopting cutting-edge methods that can maintain the quality of fruits and vegetables without the use of preservatives. Emulsion based coating approach has been regarded as a viable way to extend the shelf life of fresh produce. New opportunities are being created in a number of industries, (medicines, cosmetics and food) because of new advancements in the developing field of nanoemulsions. Nanoemulsion based methods are efficient for encapsulating the active ingredients including antioxidants, lipids, vitamins and antimicrobial agents owing to the small droplet size, stability and improved biological activity. This review provides an overview of recent developments in preserving the quality and safety of fresh-cut fruits & vegetables with nanoemulsion as a carrier of functional compounds (antimicrobial agents, antibrowning/antioxidants and texture enhancers). In addition, material and methods used for fabrication of the nanoemulsion is also described in this review. In addition, material and methods used for fabrication, of the nanoemulsion is also present.

Carvacrol-loaded nanoemulsions produced with a natural emulsifier for lettuce sanitization

Carvacrol is an antimicrobial agent that shows potential for eliminating microorganisms in vegetables, increasing food safety. However, intense odor and low water solubility of carvacrol are limiting factors for its application for fresh vegetables sanitization, which can be overcome by nanotechnology. Two different nanoemulsions containing carvacrol (11 mg/mL) were developed by probe sonication: carvacrol-saponin nanoemulsion (CNS) and carvacrol-polysorbate 80 nanoemulsion (CNP). Formulations presented appropriate droplet sizes (from 74.7 nm to 168.2 nm) and high carvacrol encapsulation efficiency (EE) (from 89.5 % to 91.5 %). CNS showed adequate droplet size distribution (PDI < 0.22) and high zeta potential values (around -30 mV) compared to CNP, with saponin chosen for the following experiments. Carvacrol nanoemulsions presented Bacterial Inactivation Concentration (BIC) against the Salmonella cocktail from 5.51 to 0.69 mg/mL and for the E. coli cocktail from 1.84 to 0.69 mg/mL. Among all tested nanoemulsions, CNS1 presented the lowest BIC (0.69 mg/mL) against both bacterial cocktails. Damage to bacterial cells in lettuce treated with nanoemulsion was confirmed by scanning electron microscopy. For lettuce sanitization, CNS1 showed a similar effect to unencapsulated carvacrol, with a high bacterial reduction (>3 log CFU/g) after lettuce immersion for 15 min at 2 × BIC. Using the same immersion time, the CNS1 (2 × BIC) demonstrated equal or better efficacy in reducing both tested bacterial cocktails (>3 log CFU/g) when compared to acetic acid (6.25 mg/mL), citric acid (25 mg/mL), and sodium hypochlorite solution (150 ppm). Lettuce immersed in CNS1 at both concentrations (BIC and 2 × BIC) did not change the color and texture of leaves, while the unencapsulated carvacrol at 2 × BIC darkened them and reduced their firmness. Consequently, carvacrol-saponin nanoemulsion (CNS1) proved to be a potential sanitizer for lettuce.

Application of Physical-Chemical Approaches for Encapsulation of Active Substances in Pharmaceutical and Food Industries

BACKGROUND

Encapsulation is a valuable method used to protect active substances and enhance their physico-chemical properties. It can also be used as protection from unpleasant scents and flavors or adverse environmental conditions.

METHODS

In this comprehensive review, we highlight the methods commonly utilized in the food and pharmaceutical industries, along with recent applications of these methods.

RESULTS

Through an analysis of numerous articles published in the last decade, we summarize the key methods and physico-chemical properties that are frequently considered with encapsulation techniques.

CONCLUSION

Encapsulation has demonstrated effectiveness and versatility in multiple industries, such as food, nutraceutical, and pharmaceuticals. Moreover, the selection of appropriate encapsulation methods is critical for the effective encapsulation of specific active compounds. Therefore, constant efforts are being made to develop novel encapsulation methods and coating materials for better encapsulation efficiency and to improve properties for specific use.

Curcumin: Overview of Extraction Methods, Health Benefits, and Encapsulation and Delivery Using Microemulsions and Nanoemulsions

Curcumin is the principal curcuminoid found in the rhizomes of turmeric. Due to its therapeutic action against cancer, depression, diabetes, some bacteria, and oxidative stress, it has been used widely in medicine since ancient times. Due to its low solubility, the human organism cannot completely absorb it. Advanced extraction technologies, followed by encapsulation in microemulsion and nanoemulsion systems, are currently being used to improve bioavailability. This review discusses the different methods available for curcumin extraction from plant material, methods for the identification of curcumin in the resulting extracts, its beneficial effects on human health, and the encapsulation techniques into small colloidal systems that have been used over the past decade to deliver this compound.

Encapsulation of sesamol and retinol using alginate and chitosan-coated W/O/W multiple emulsions containing Tween 80 and Span 80

The conditions of production of multiple W/O/W nanoemulsions containing sesamol and retinol were optimized using response surface methodology (RSM). Span 80 (5, 10, and 15 % w/v), Tween 80 (1, 5.5, and 10 % w/v), and water in oil ratio (W/O) (20, 30, and 40 %) were considered as independent variables while encapsulation efficiency (EE%) and particle size were taken as dependent variables. Alginate (Alg) and chitosan (CS) were also applied to form a deposit layer. An optimum sample with an EE of 92.93 % and particle size of 381.94 nm was produced when Tween 80, Span 80, and W/O were 6.24 %, 10.84 %, and 37.70 %, respectively. Based on the Fourier transform infrared spectroscopy (FTIR), detection of hydrophobic band (2899 cm^-1) approved the physical entrapment of biomolecules. Differential scanning calorimetry (DSC) indicated an endothermic peak at 236.48 °C associated with the ionic interactions of Alg-CS. Confocal laser scanning microscopy (CLSM) indicated Alg-CS complex deposit layer formed by electrostatic attraction surrounding the W/O/W multiple layers. The in vitro release of sesamol and retinol was 39 % of sesamol and 22 % of retinol in simulated gastric fluid (SGF) and 56 % and 22 % in simulated intestinal fluid (SIF), respectively.

Fabrication, characterization, and interventions of protein, polysaccharide and lipid-based nanoemulsions in food and nutraceutical delivery applications: A review

The fabrication and application of nanoemulsions for incorporating and delivering diverse bioactive compounds, particularly hydrophobic substances, is becoming an increasing focus of research with the potential to improve the nutritional and health status of individuals. Constant advancements in nanotechnological approaches aid in the creation of nanoemulsions using diverse biopolymers such as proteins, peptides, polysaccharides, and lipids to improve the stability, bioactivity, and bioavailability of active hydrophilic and lipophilic compounds. This article provides a comprehensive overview of various techniques used to create and characterize nanoemulsions as well as theories for understanding their stability. The article also highlights the advancement of nanoemulsions in boosting the bioaccessibility of nutraceuticals to help advance their potential use in various food and pharmaceutical formulations.

Formulation and Characterization of a Novel Palm-Oil-Based α-Mangostin Nano-Emulsion (PO-AMNE) as an Antimicrobial Endodontic Irrigant: An In Vitro Study

Aim: To formulate and characterize a palm-oil-in-water-based α-Mangostin nano-emulsion (PO-AMNE) endodontic irrigant, in order to evaluate its antibacterial efficacy against Enterococcus faecalis, Staphylococcus epidermidis, and Candida albicans biofilms, as well as its capacity to remove smear layer. Methods: The solubility of α-Mangostin in various oils was determined and selected, surfactants and co-surfactants were used for the nano-emulsion trial. PO-AMNE was prepared and optimized. The MIC was performed, and the antimicrobial efficacy was estimated against biofilms. The optimized 0.2% PO-AMNE irrigant antimicrobial efficacy in a tooth model was done using colony-forming units. The treated teeth were processed by scanning electron microscopic examination for debris and smear layer removal. An Alamar Blue assay was used to evaluate cell viability. The optimization of the PO-AMNE irrigant was performed using Box–Behnken statistical design. Results: The optimized 0.2% PO-AMNE irrigant was found to have a particle size of 340.9 nm with 0.246 PDI of the dispersed droplets, and a zeta potential (mV) of −27.2 ± 0.7 mV. The MIC values showed that 0.2% PO-AMNE (1.22 ± 0.02) were comparable to 2% CHX (1.33 ± 0.01), and 3.25% NaOCl (2.2 ± 0.09) had the least inhibition for E. faecalis. NaOCl (3.25%) showed the maximum inhibition of S. epidermidis (0.26 ± 0.05), whereas 0.2% PO-AMNE (1.25 ± 0.0) was comparable to 2% CHX (1.86 ± 0.07). For C. albicans, 2% CHX (8.12 ± 0.12) showed the least inhibition as compared to 0.2% PO-AMNE (1.23 ± 0.02) and 3.25% NaOCl (0.59 ± 0.02). The 0.2% PO-AMNE irrigant was then evaluated for its antimicrobial efficacy against the three biofilms, using colony-forming units. The 0.2% PO-AMNE was comparable to both 3.25% NaOCl and 2% CHX in inhibiting the growth of biofilms. The 0.2% PO-AMNE and 17% EDTA eliminated the smear layer with the lowest mean scores (p < 0.001). Finally, 0.2% PO-AMNE was shown to be biocompatible when compared to 17% EDTA, 3.25% NaOCl, and 2% CHX in immortalized oral keratinocyte cells. Conclusion: Overall, the formulated 0.2% PO-AMNE irrigant was an effective antimicrobial and biocompatible which could combat endodontic-infection-related polymicrobial biofilms.

Bioactive Lavandula angustifolia essential oil-loaded nanoemulsion dressing for burn wound healing. In vitro and in vivo studies

The aim of this study was to develop a dressing with bioactive lavender in a new form of nanoemulsion, and to verify its biosafety and effectiveness in burn wound healing. As part of this research, the composition of the bioactive carrier of lavender oil in the form of a nanoemulsion obtained using ultrasound was optimised. The mean particle size of the internal phase and polydispersity were determined using the dynamic light scattering method using a Zestasizer NanoZS by Malvern and using cryo-transmission electron microscopy (TEM). These studies confirmed that the selected formulation had a particle size of approximately 180 nm and remained stable over time. The preparation was also subjected to rheological analysis (viscosity approximately 480 mPa·s) and a pH test (approximately 6). A macroemulsion (ME) with the same qualitative composition was developed as a reference. Nanoformulations and MEs were tested for skin penetration using Raman spectroscopy in an in vitro model. Research has shown that both formulations deliver oil to living layers of the skin. Subsequently, studies were conducted to confirm the effect of lavender oil in emulsion systems on the mitigation of the inflammatory reaction and its pro-regenerative effect on the wound healing process in an in vitro cell culture model. The safe concentration of the oil in the emulsion preparation was also determined based on preliminary in vivo tests of skin sensitisation and irritation as well as an hemocompatibility test of the preparation.

Size-Controlled Preparation of Docetaxel- and Curcumin-Loaded Nanoemulsions for Potential Pulmonary Delivery

Lung cancer is one of the deadliest pulmonary diseases in the world. Although docetaxel (DTX) has exhibited superior efficacy in lung cancer treatment, it has demonstrated numerous adverse effects and poor bioavailability. The natural product extract, curcumin (CCM), has reportedly reduced toxicity and synergistically improved DTX bioavailability. Nonetheless, the hydrophobic nature of DTX and CCM limits their clinical use. Nanoemulsion pulmonary delivery of DTX and CCM has demonstrated potential as a drug carrier to alleviate these drawbacks. The controlled preparation of inhalable DTX- and CCM-loaded nanoemulsions within the 100 to 200 nm range was explored in this study. A response surface methodology (RSM) based on a central composite design (CCD) was utilized to fabricate the desired size of the nanoemulsion under optimized conditions. Different process parameters were employed to control the size of the nanoemulsions procured through a high-energy emulsification technique. The size of the resultant nanoemulsions decreased with increasing energy input. The actual response according to the targeted sizes for DTX- and CCM-loaded nanoemulsion models exhibited excellent agreement with the predicted value at below 5% residual standard error under optimized conditions. The nanoemulsion of 100 nm particle size demonstrated better membrane permeability than their larger counterparts. Moreover, the formulations documented favorable physicochemical and aerodynamic pulmonary delivery properties and reduced toxicity in human lung fibroblast (MRC-5) cells. Hence, this tunable size of nanoemulsions could be a suitable alternative drug delivery for pulmonary diseases with increased local lung concentration.

Vitamin D3-Loaded Nanoemulsions as a Potential Drug Delivery System for Autistic Children: Formulation Development, Safety, and Pharmacokinetic Studies

The aim of the current study is the development of a vitamin D₃ (VD3)-loaded nanoemulsion (NE) formulation to improve VD3 oral bioavailability for management of vitamin D inadequacy in autistic children. Eight NE formulations were prepared by high-speed homogenization followed by ultrasonication. Four vegetable oils were employed along with two concentrations of Span 20 as the emulsifier. Glycerol, fructose, and mango flavor were included as viscosity modifier, sweetening, and flavoring agents, respectively. The prepared VD3-loaded NE formulations exhibited high drug content (> 98%), droplet size (DS) ranging from 61.15 to 129.8 nm with narrow size distribution, zeta potential values between - 9.83 and - 19.22 mV, and acceptable pH values (4.59-5.89). Storage stability showed that NE formulations underwent coalescence and phase separation during 6 months at room temperature, whereas at refrigerated conditions, formulations showed slight creaming. The optimum formulation (VD3-NE6) revealed a non-significant DS growth at refrigerated conditions and spherical morphology under transmission electron microscopy. VD3-NE6 did not produce any toxic effects to rats treated orally for 3 months, where normal blood picture and kidney and liver functions were observed compared to control rats. Also, serum calcium, oxidative stress, and apoptosis biomarkers remained within normal levels, indicating the safety of the optimum formulation. Furthermore, evaluation of VD3-NE6 oral bioavailability depicted a significant increase in AUC_0-72 and C_max with decreased T_max compared to plain VD3. The optimum formulation demonstrated improved stability, safety, and oral bioavailability indicating the potential for successful management of vitamin D deficiency in autistic children.

The Therapeutic Potential of Algal Nanoparticles: A Brief Review

Recently, the green synthesis of metallic nanoparticles (NPs) has received tremendous attention as a simple approach. The green pathway of biogenic synthesis of metallic NPs through microbes may provide a sustainable and environmentally friendly protocol. Green technology is the most innovative technology for various biological activities and lacks toxic effects. Reports have shown the algae-mediated synthesis of metal NPs. Algae are widely used for biosynthesis as they grow fast; they produce biomass on average ten times that of plants and are easily utilized experimentally. In the future, the production of metal NPs by different microalgae and their biological activity can be explored in diverse areas such as catalysis, medical diagnosis, and anti-biofilm applications.

Preparation and characterization of geraniol nanoemulsions and its antibacterial activity

Geraniol nanoemulsions (G-NE) based on Tween 80 and medium chain triglyceride (MCT) as surfactant and co-surfactant, respectively, has been prepared by the spontaneous emulsification method. Its physical and chemical properties such as mean particle size, zeta potential, PDI, pH, viscosity, contact angle, appearance morphology, and stability (storage stability, thermal stability, centrifugal properties, acid-base stability, and freeze-thaw properties) of the droplet were analyzed. The results showed that the mean particle size of G-NE was 90.33 ± 5.23 nm, the PDI was 0.058 ± 0.0007, the zeta potential was -17.95 ± 5.85 mV and the encapsulation efficiency was >90%. The produced G-NE has been demonstrated to be fairly stable in long-term storage at 4°C, pH = 5 and high-speed centrifuges. Moreover, G-NE had a significant inhibition effect on Staphylococcus aureus, Escherichia coli, Salmonella typhimurium and Listeria monocytogenes (p < 0.05). The bacterial inhibition rates of G-NE at a concentration of 1 MIC were 48, 99, 71.73, and 99% after 12 h of action against these four foodborne pathogenic bacteria, respectively. Therefore, the results obtained indicated that nanoemulsification enhanced the stability and antibacterial activity of geraniol to some extent, which will promote the utilization of geraniol in food preservation.

Flavor release and stability comparison between nano and conventional emulsion as influenced by saliva

Flavour release and emulsion stability depend on volatile organic compounds' environmental conditions, food microstructure, and physicochemical properties. The effect of pH (3.5 vs 7.0) and saliva addition on stability and flavour release from nano and conventional emulsions was investigated using particle size, charge and Lumisizer measurments. Larger particle sizes were observed at lower pressures and in saliva-containing emulsions. At 1700 bar, nano-emulsions (below 150 nm) were created at pH 3.5 and 7.0 including saliva-containing emulsions. As was clear from the creaming velocity measurements, saliva addition decreased the emulsion stability by reducing particle charges and increased viscosity by more than 50%, especially when prepared at pH 3.5 closer to the isoelectric point of the used emulsifier β-lactoglobulin (pH 5.2). (5.2). Flavour release from emulsions was measured at equilibrium using a phase ratio variation to determine partition coefficients and dynamically using an electronic nose. Partition coefficients of the flavour compounds for most conditions were two to four times lower in emulsions prepared at pH 7.0 than at pH 3.5 and in emulsions without saliva. Emulsions prepared with higher pressures showed stronger flavor release rates, while additional salvia dropped the release rate for ethyl acetate at pH 3.5. The physicochemical properties of flavour compounds, saliva addition and pH of emulsions influenced flavour release more than homogenization pressures. The potential in using nano-emulsions in food applications an be attributed higher stability and enhanced flavor release.

Application of nanotechnology in food: processing, preservation, packaging and safety assessment

Even though nanotechnology is extensively applied in agriculture, biochemistry, medicine and many other sectors, it is a developing field that conforms to new and more complex applications in food systems as compared to other technologies. It offers a viable strategy for integrating cutting-edge technology into a wide range of operations related to the production, development, fabrication, packaging, storage and distribution of food. The most fundamentally sophisticated technology in nano-based food science, nanoparticles deal with a wide range of nanostructured materials and nano methods, including nanofood, nanotubes, nanocomposites, nano packaging, nanocapsules, nanosensors, liposomes, nanoemulsions, polymeric nanoparticles and nanoencapsulation. This method is developed to increase food solubility and shelf life, availability of bioactive chemical, the protection of food constituents, nutritional supplementation, fortification and food or constituent delivery. Additionally, it serves as an antibacterial agent by generating reactive oxygen species (ROS) which cause bacterial DNA damage, protein denaturation and cell damage. Although the use of nanotechnology in food applications is advancing, there are certain negative or dangerous effects on health related to the toxicity and dangers of ingesting nanoparticles in food. The use of nanotechnology in the food industry, notably in processing, preservation and packaging, with its promising future, was addressed in this study. The toxicity of nanoparticles in food as well as its development in food safety assessments with certain areas of concern were also reviewed.

Preparation of Fucoxanthin Nanoemulsion Stabilized by Natural Emulsifiers: Fucoidan, Sodium Caseinate, and Gum Arabic

This study was proposed to investigate the possibility of O/W nanoemulsion stabilization via natural emulsifiers as a delivery system for fucoxanthin. Nanoemulsions were prepared using ultrasonic treatment (150 W, amplitude 80%, 10 min) with different levels (0.5%, 1%, and 2% wt) of fucoidan, gum Arabic, and sodium caseinate as natural emulsifires and they were compared with tween 80. Then, the creaming index, stability, encapsulation efficacy, Fourier-transform infrared (FT-IR) spectroscopy, and in vitro release were evaluated. The best stability and lowest creaming index were observed at 2% wt of emulsifiers. Nanoemulsions with droplet sizes (113.27−127.50 nm) and zeta potentials (−32.27 to −58.87 mV) were prepared. The droplet size of nanoemulsions was reduced by increasing the emulsifier concentration, and the best nanoemulsion stability after 15 days of storage was in the following order: tween 80 > sodium caseinate > fucoidan > gum Arabic. The encapsulation efficacy of nanoemulsions stabilized by sodium caseinate, fucoidan, and gum Arabic were 88.51 ± 0.11%, 79.32 ± 0.09%, and 60.34 ± 0.13%, respectively. The in vitro gastrointestinal fucoxanthin release of nanoemulsion stabilized with tween 80, sodium caseinate, fucoidan, and gum Arabic were 85.14 ± 0.16%, 76.91 ± 0.34%, 71.41 ± 0.14%, and 68.98 ± 0.36%, respectively. The release of fucoxanthin from nanoemulsions followed Fickian diffusion. The FTIR also confirmed the encapsulation of fucoxanthin.

Improving the Bioaccessibility and Bioavailability of Carotenoids by Means of Nanostructured Delivery Systems: A Comprehensive Review

Carotenoids are bioactive compounds provided by the diet playing a key role in maintaining human health. Therefore, they should be ingested daily in an adequate amount. However, even a varied and well-balanced diet does not guarantee an adequate intake, as both the bioaccessibility and bioavailability of the compounds significantly affect their absorption. This review summarizes the main results achieved in improving the bioaccessibility and bioavailability of carotenoids by means of nanostructured delivery systems, discussing in detail the available lipid-based and biopolymeric nanocarriers at present, with a focus on their formulation and functional efficiency. Although the toxicity profile of these innovative delivery systems is not fully understood, especially for long-term intake, these systems are an effective and valuable approach to increase the availability of compounds of nutritional interest.

Current trends in the development of soy-based foods containing probiotics and paving the path for soy-synbiotics

In the world of highly processed foods, special attention is drawn to the nutrient composition and safety of consumed food products. Foods fortified with probiotic bacteria confer beneficial effects on human health and are categorized as functional foods. The salubrious activities of probiotics include the synthesis of vital bioactives, prevention of inflammatory diseases, anticancerous, hypocholesterolemic, and antidiarrheal effects. Soy foods are exemplary delivery vehicles for probiotics and prebiotics and there are diverse strategies to enhance their functionality like employing mixed culture fermentation, engineering probiotics, and incorporating prebiotics in fermented soy foods. High potential is ascribed to the concurrent use of probiotics and prebiotics in one product, termed as "synbiotics," which implicates synergy, in which a prebiotic ingredient particularly favors the growth and activity of a probiotic micro-organism. The insights on emended bioactive profile, metabolic role, and potential health benefits of advanced soy-based probiotic and synbiotic hold a promise which can be profitably implemented to meet consumer needs. This article reviews the available knowledge about strategies to enhance the nutraceutical potential, mechanisms, and health-promoting effects of advanced soy-based probiotics. Traditional fermentation merged with diverse strategies to improve the efficiency and health benefits of probiotics considered vital, are also discussed.