Systematically Exploring Molecular Aggregation and Its Impact on Surface Tension and Viscosity in High Concentration Solutions

Optimizing the performance of silica nanoparticles functionalized with a near-infrared fluorescent dye for bioimaging applications

Modified fluorescent nanoparticles continue to emerge as promising candidates for drug delivery, bioimaging, and labeling tools for various biomedical applications. The ability of nanomaterials to fluorescently label cells allow for the enhanced detection and understanding of diseases. Silica nanoparticles have a variety of unique properties that can be harnessed for many different applications, causing their increased popularity. In combination with an organic dye, fluorescent nanoparticles demonstrate a vast range of advantageous properties including long photostability, surface modification, and signal amplification, thus allowing ease of manipulation to best suit bioimaging purposes. In this study, the Stöber method with tetraethyl orthosilicate (TEOS) and a fluorescent dye sulfo-Cy5-amine was used to synthesize fluorescent silica nanoparticles. The fluorescence spectra, zeta potential, quantum yield, cytotoxicity, and photostability were evaluated. The increased intracellular uptake and photostability of the dye-silica nanoparticles show their potential for bioimaging.

Self-aggregation, H-bonding, and photoresponse in film and solution states of azobenzene containing polyurea

We critically understand the hydrogen bonding interactions and electronic transitions occurring in a thin film as well as in solution of a photo-responsive polymer, azo-polyurea (azo-PU). We synthesize azo-PU by covalent attachment of the azobenzene chromophore to the main chain of polyurea. Azo-PU shows reversible photoisomerization between trans and cis states upon light exposure, the occurrence of which is typically analysed using the π-π* and n-π* electronic transition peaks in the UV-visible absorption spectrum. We find that the π-π* and n-π* bands undergo a redshift and blueshift respectively on dissolving azo-PU in DMF solvent, resulting in a single overlapped peak in the spectrum. However, upon UV irradiation, these bands split into two independent transitions that are characteristic of azo-PU solid films. These observations are explained based on the changes in polymer-polymer and polymer-solvent interactions through hydrogen bonding and self-aggregation tendency. The experimental findings are corroborated using DFT simulations which provide useful insights into electronic orbital transitions, electron distribution, and hydrogen bonding interaction through IR vibrational modes.

Synthesis of CxNy-rich polycyclic oligomers from primeval monomers in aqueous media

A multichannel, non-thermolytic and efficient pathway is described toward the formation of functionalized carbon nitride-like oligomers, starting from readily available cyanamide and glyoxal (in ratios >2), in aqueous media under mild conditions. Such oligomers can be isolated as stable solids that result from structures involving cyanamide self-additions along with structures formally derived from the condensation of cyanamide, dicyandiamide or melamine with glyoxal, leading occasionally to oxygen-containing units. The oligomeric aggregates have masses up to 500 u, as inferred from mass spectra analyses, and their formation can be rationalized in terms of polyadditions of cyanamide (up to 10-mer) and glyoxal. The latter is not only a willing reaction partner, but also promotes facile condensation by enhancing the reactivity of nitrile fragments and inducing a significant lowering of the energy barriers. This mechanistic surmise is also supported by DFT calculations of the early condensation steps. As a result, melamine/triazine-type structures are obtained in aquatic environments under much milder conditions than those usually required by other synthetic procedures. Moreover, our results also help unveil the abiotic processes affording complex organic matter on celestial bodies and early earth.

Unsupervised bubble calorimetry analysis: Surface tension from isothermal titration calorimetry

HYPOTHESIS

The injection of air into the sample cell of an isothermal titration calorimeter containing a liquid provides a rich-in-information signal, with a periodic contribution arising from the creation, growing and release of bubbles. The identification and analysis of such contributions allow the accurate determination of the surface tension of the target liquid.

EXPERIMENTS

Air is introduced at a constant rate into the sample cell of the calorimeter containing either a pure liquid or a solution. The resulting calorimetric signal is analyzed by a new algorithm, which is implemented into a computational code.

FINDINGS

The thermal power generated by our experiments is often noisy, thus hiding the periodic signal arising from the bubbles' formation and release. The new algorithm was tested with a range of different types of calorimetric raw data, some of them apparently being just noise. In all cases, the contribution of the bubbles to the signal was isolated and the corresponding period was successfully determined in an automated way. It is also shown that two reference measurements suffice to calibrate the instrument at a given temperature, regardless the injection rate, allowing the direct determination of surface tension values for the liquid contained in the sample cell.

Insights into coloration enhancement of mercerized cotton fabric on reactive dye digital inkjet printing

Mercerization can improve the utilization rate of dyes in the dyeing process, and reduce the discharge of washing wastewater. However, the effect and mechanism of mercerization is not clear on digital inkjet printing of cotton fabric. In this work, two kinds of cotton fabrics (original and mercerized) were used for reactive dye digital inkjet printing, and the color improvement mechanism of caustic soda mercerization was investigated. It was found that the crystallinity of cotton fibre was adjusted from 73.9% to 58.5% by caustic mercerization, and the breaking strength did not decrease compared with original cotton fibre. Thus, the accessible reactive hydroxyl groups and the wettability were enhanced for treated cotton fibres, which promoted the inks' wick into the fibres. Interestingly, the penetration of ink droplets between the yarns and fibres after caustic mercerization was decreased, thus the dyes mainly gathered on the surface of cotton fabric. The cotton fibres' cross section structure changed from flat oval to round, which increased the contact area between reactive dyes and fibres. At a certain amount of ink, the optimal K/S value of 23.47 was achieved for treated cotton fabrics, which was higher than that of untreated cotton fabrics (17.15). Meanwhile, the printed fabrics displayed good washing fastness, rubbing fastness and glossiness. This work has important theoretical guiding significance for producing high quality mercerized cotton fabric digital printing products and reducing printing wastewater discharge.

Mercerization can control the crystallinity of cotton fiber, promote the absorption of ink droplets' wick into the fiber and inhibit ink droplets from penetrating the back of fabric. Therefore, the printing quality was extremely enhanced.

Effects of alkanolamine solvents on the aggregation states of reactive dyes in concentrated solutions and the properties of the solutions

The aggregation of dyes is a common phenomenon in solutions, particularly concentrated solutions, which seriously affects the dyeing and printing processes. In this study, the effects of alkylamine solvents on the reactive dye aggregation behavior in highly concentrated solutions was studied. Typical cases were conducted with two slightly toxic and environmentally friendly solvents, namely diethanolamine (DEA) and triethanolamine (TEA), and two reactive dyes, namely C. I. Reactive Red 218 (R-218) and C. I. Reactive Orange 13 (O-13). Aggregation states were studied by ultraviolet-visible (UV-Vis) absorption spectroscopy, Gaussian-peak-fitting method and fluorescence spectroscopy. The results showed that both the additives DEA and TEA could reduce the dye aggregation because the solvents, DEA and TEA, can break the iceberg structure and allow easy entry of the molecules into the dye aggregates. Also, the disaggregation caused by DEA was higher as compared with TEA, which may be caused by the weaker hydrogen bond and the relatively smaller steric hindrance effects of DEA. The schematic of disaggregation between R-218 and DEA was also discussed. For R-218, the dimers were disaggregated to monomer, while the higher-ordered aggregates were disaggregated to trimers and dimers for O-13. Moreover, physical properties such as viscosity and surface tension of the solutions were measured. This investigation is instructive for the further dyeing progress with organic bases in the textile industries.

Effect of Diethylene Glycol on the Inkjet Printability of Reactive Dye Solution for Cotton Fabrics

Digital inkjet printing technology plays an increasingly important role in textile printing. The printing printability of reactive dye inks is the key to improving the quality of printed fabrics. In this study, an eco-friendly and simple method to improve the inkjet printability of reactive dye solutions was proposed. The influence of diethylene glycol on the surface tension, rheology, and dye molecule aggregation properties for three reactive dye solutions was investigated. The jetting performance of dye solutions was explored by observing droplet formation. Moreover, the color performance of printed cotton fabrics, including reactive dye solution penetration, colorimetric values, and color strength, was evaluated. Addition of diethylene glycol could change the aggregation of dye molecules by hydrophobic forces and hydrogen bonds. Diethylene glycol could inhibit formation of satellite droplets by changing the viscosity and surface tension of solutions, which made the pattern printed on cotton fabrics show regular edge sharpness. Furthermore, the dye solutions containing 10% DEG not only satisfied various properties of reactive dye inks but also had the highest color strength and the deepest and brightest colors.

Synergistic Effects of Alpha Olefin Sulfonate and Sodium Alginate on Inkjet Printing of Cotton/Polyamide Fabrics

Bicomponent or multicomponent fiber fabrics are important materials for manufacturing high-performance textiles. However, the printing and dyeing of these fabrics are very difficult because the dyeability of different fibers varies greatly. The present study investigated the inkjet printing performance of interwoven fabrics of cotton and polyamide 6. The surfactant alpha olefin sulfonate (AOS) was incorporated into the sodium alginate (SA) solution to pretreat the fabrics to improve the color effects of printed fabrics. The results indicate that fabric pretreatment using 5% alpha olefin sulfonate and 2% sodium alginate significantly enhanced the image colors through increasing the hydrophilicity of the film formed on polyamide fibers and changing the surface morphology of both the fibers. The molecules of AOS interacted with the macromolecules of SA to form the composite films, where the AOS concentration gradient increased outward and SA concentration gradient increased inward. The synergistic pretreatment of alpha olefin sulfonate and sodium alginate endowed the fabrics with high inkjet printing performance, satisfactory color fastnesses, and durability.

Effect of Polyol Molecular Structure on Fluidity, Surface Tension, and Printed Pattern Sharpness of Disperse Dye Inks

In the present study, density functional theory (DFT) has been used in simulating and calculating the molecular geometries of differently structured polyols (within a water phase), as well as the weak interactions between these polyols and the water molecules. Furthermore, low field nuclear magnetic resonance (LF-NMR) has been used in studying the transverse relaxation times of different polyols, in addition to their (20.00 wt %) fluidity in an aqueous environment. Moreover, the influence of polyols, with different molecular structures, on the ink fluidity, was also explored. A bubble pressure tensiometer was also used to characterize the surface tension of the aqueous polyol (20.00 wt %) solution, the sodium dodecyl sulfate (SDS, 0.50 wt %) solution, and the ink. This was made to clarify the influence of polyol and SDS on the surface tension of ink. In addition, the particle size, zeta potential, pH value, viscosity, and rheological properties of the ink, were also investigated. The resulting data showed that polyols have certain effects on the particle size, stability, and viscosity of the ink. The jetting performances of different polyol inks were, under certain conditions of the inkjet drive waveform, also explored. The results showed that the fluidity, viscosity, and surface tension of the ink will render a certain influence on the inkjet performances. The prepared polyol ink was thereafter used for polyester fabric printing, and the contour sharpness and color fastness of the printed fabric were accordingly evaluated. The data showed that the increase in ink viscosity, and decrease in fluidity, promote the improvement in contour sharpness. In addition, the printed fabric demonstrated an excellent color fastness.

Green and Efficient Inkjet Printing of Cotton Fabrics Using Reactive Dye@Copolymer Nanospheres

Digital inkjet printing of textiles possesses great advantages like high efficiency and flexible production, but the challenges like the risk of causing serious environmental problems due to the large usage of dyes and chemicals still remain a matter of concern. In response to this problem, herein, a novel kind of reactive dye@copolymer nanosphere was prepared through the adsorption of C. I. Reactive Red 218 dyes (RR218) onto cationic poly(styrene-butyl acrylate-vinylbenzyl trimethylammonium chloride) (PSBV) nanospheres and applied in inkjet printing on woven cotton fabric. Results show that the prepared RR218@PSBV nanospheres possessed homogeneous size and good stability for ink preparation. In comparison with the original RR218 solution, the color depth of RR218@PSBV-printed fabric increased by 1.4 times and the dye residues in the printing effluent were reduced by about 45%. Meanwhile, the consumptions of sodium carbonate and urea in conventional inkjet printing were reduced by about 3.3 and 22.8 mg/cm², respectively, and the printing process was simplified with 30% energy saving. Furthermore, the mechanism of the color enhancement by nanospheres was revealed by the calculation of absorption and scattering coefficients based on the Kubelka-Munk function. This work provides a potential application of dye@polymer nanospheres to promote the optimization of the textile inkjet printing technique and alleviates the environmental impact of conventional textile coloration.

Effects of Viscosity and Surface Tension of a Reactive Dye Ink on Droplet Formation

In textile inkjet printing, understanding the effect of viscosity and surface tension of a reactive dye ink on droplet formation is of great significance. As an organic ecofriendly solvent, polyethylene glycol with a molecular weight of -400 g/mol (PEG400) was used to prepare reactive dye inks with or without Surfynol 465 (S465) to explain separately how viscosity and surface tension affect the droplet formation of a reactive dye ink. The intermolecular interactions in the ink and physical properties of the ink were investigated by measuring the visible absorption spectra, hydrodynamic radius, viscosity, and surface tension. Droplet formation under a single variable influence of viscosity or surface tension was observed by taking photographs using a high-speed camera. Results show that a high ink viscosity condition generates no satellite droplet formation and a slower droplet velocity, and a higher surface tension tends to cause ligament rupture from the nozzle tip and the droplet. Moreover, a twill cotton fabric printed using the PEG-S465-dye ink at a 30% PEG400 concentration showed higher ink penetration, dye fixation rate, ideal color strength, and rubbing fastness.

Comparing Benzodithiophene Unit with Alkylthionaphthyl and Alkylthiobiphenyl Side-Chains in Constructing High-Performance Nonfullerene Solar Cells

Using single-bonded and fused aromatic rings are two methods for extending the π-conjugation in the vertical direction of benzo [1,2-b:4,5-b'] dithiophene (BDT) unit. To investigate which method is more efficient in nonfullerene systems, two novel polymers based on alkylthionaphthyl and alkylthiobiphenyl substituted BDT named PBDTNS-FTAZ and PBDTBPS-FTAZ are designed and synthesized. Two polymers only exhibit small differences in structure, but huge differences in photovoltaic properties. They are studied by blended with 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)indanone)-5,5,11,11-tetrakis(4-hexylphenyl)dithieno [2,3-d':2,3'-d']-s-indaceno [1,2-b:5,6-b'] dithiophene (ITIC). The device based on PBDTNS-FTAZ:ITIC showed the best power conversion efficiency (PCE) of 9.63% with the Voc of 0.87 V, a Jsc of 18.06 mA/cm2 and a fill factor of 61.21%, while the PBDTBPS-FTAZ:ITIC only exhibit a maximum PCE of 7.79% with a Voc of 0.86 V, a Jsc of 16.24 mA/cm2 and a relatively low fill factor of 55.92%. Therefore, extending π-conjugation with alkylthionaphthyl is more effective against constructing nonfullerene solar cells.

Appropriate Molecular Interaction Enabling Perfect Balance Between Induced Crystallinity and Phase Separation for Efficient Photovoltaic Blends

Fluorination is a promising modification method to adjust the photophysical profiles of organic semiconductors. Notably, the fluorine modification on donor or acceptor materials could impact the molecular interaction, which is strongly related to the morphology of bulk heterojunction (BHJ) blends and the resultant device performance. Therefore, it is essential to investigate how the molecular interaction affects the morphology of BHJ films. In this study, a new fluorinated polymer PBDB-PSF is synthesized to investigate the molecular interaction in both nonfluorinated (ITIC) and fluorinated (IT-4F) systems. The results reveal that the F-F interaction in the PBDB-PSF:IT-4F system could effectively induce the crystallization of IT-4F while retaining the ideal phase separation scale, resulting in outstanding charge transport. On the contrary, poor morphology can be observed in the PBDB-PSF:ITIC system because of the unbalanced molecular interaction. As a consequence, the PBDB-PSF:IT-4F device delivers an excellent power conversion efficiency of 13.63%, which greatly exceeds that of the PBDB-PSF:ITIC device (9.84%). These results highlight manipulating the micromorphology with regard to molecular interaction.

Interaction of Reactive-Dye Chromophores and DEG on Ink-Jet Printing Performance

Digital inkjet printing has been widely used in textile industry. The quality of dye solutions and ink-jet droplets limits the ink-jet printing performance, which is very important for obtaining high-quality ink-jet printing images on fabrics. In this paper, we introduced diethylene glycol (DEG) into the dye solutions of Reactive Blue 49 and Reactive Orange 13, respectively, and investigated the interaction between dye chromophores and DEG molecules. Results indicated that the dye chromophores were featured in the aggregation. Adding DEG into the dye solution could effectively disaggregate clusters of reactive dyes, and eliminate satellite ink droplets, thus improving the resolution of the ink-jet printing image on fabrics. Under the same DEG concentration, the disaggregation effect was more obvious in Orange 13 than in Reactive Blue 49. Higher DEG concentration was required in Reactive Orange 13 solution for creating complete and stable ink drops. The surface tension and viscosity of the dye solutions were measured, and printing performance on cotton fabrics was evaluated. The interaction mechanism between dye chromophores and DEG molecules was also investigated. Results from this work are useful for high-quality ink-jet printing images on fabrics.