Spectroscopic Characterization of Emulsions Generated with a New Laser-Assisted Device

Probing the stability and quality of the cellulose-based Pickering emulsion containing sesamolin-enriched sesame oil by chemometrics-assisted ATR-FTIR spectroscopy

This study presents the employment of Fourier transform infrared (FTIR) spectroscopy with attenuated total reflection and principal component analysis (PCA) to analyze the stability of a Pickering emulsion stabilized by carboxylated-cellulose nanocrystal (cCNC) comprising sesame oil phases with or without sesamolin. FTIR measurements identified an intermolecular hydrogen bond between the ester group of the triglyceride and the carboxyl group of the cCNC to create the emulsion droplet. The spectral bands from the hydroxyl group vibration (3700-3050 cm-1), carbonyl (1744 cm-1), CO groups of the ester triglyceride and cCNC (1160-998 cm-1) markedly discriminated between stabilized and destabilized emulsions. The PCA of FTIR spectra detected the change of molecular interaction during storage according to creaming, aggregation, and coalescence and changes in physicochemical parameters such as droplet size, refractive index, and zeta potential. Hence, PCA enabled the observation of the destabilization of emulsion in real-time.

Novel griseofulvin zinc nanohybrid emulsion for intensifying the antimicrobial control of dermatophytes and some opportunistic pathogens

Dermatophytosis is a critical sort of skin infection caused by dermatophytes. The long-term treatment of such skin infections may be improved through the application of nanotechnology. This study aimed to prepare griseofulvin zinc Nanohybrid emulsion (GF-Zn-NHE) to improve griseofulvin activity against dermatophytes and some opportunistic pathogenic yeasts and bacteria. The GF-Zn-NHE is prepared by ultra-homogenization ultra-sonication strategies and validated by UV-visible spectroscopy analysis that confirms presences of griseofulvin and Zn-NPs peaks at 265 and 360 nm, respectively. The GF-Zn-NHE has mean distribution size 50 nm and zeta potential in the range from -40 to -36 mV with no significant changes in size distribution and particle size within 120 day ageing. Fourier transform infrared spectroscopy spectrum confirmed the presence of griseofulvin and Zn-NPs stretching vibration peaks. Gamma ray has a negative influence on GF-Zn-NE production and stability. GF-Zn-NHE drug release 95% up to 24 h and 98% up to 72 h of GF was observed and Zinc 90% up to 24 h and 95% up to 72 h, respectively. High antimicrobial activity was observed with GF-Zn-NHE against dermatophytic pathogens in compare with GF, GF-NE, zinc nitrate and ketoconazole with inhibition zone ranged from 14 to 36 mm. The results have shown that the MIC value for Cryptococcus neoformans, Prophyromonas gingivalis and Pseudomonas aeruginosa is 0.125 mg ml -1 and for Trichophyton rubrum, L. bulgaricus and Escherichia coli value is 0.25 mg ml -1 and for Candida albicans, Malassezia furfur and Enterococcus faecalis is 0.5 mg ml -1 and finally 1 mg ml -1 for Streptococcus mutans. TEM of treated Cryptococcus neoformans cells with GF-Zn-NHE displayed essentially modified morphology, degradation, damage of organelles, vacuoles and other structures.

Treatment of varicose veins using the Cryo laser after foam technique

Sclerotherapy is the treatment of choice for telangiectasias and reticular veins. The most common side effects of this procedure are hyperpigmentation and matting, which are feared owing to their aesthetic damage and difficulty of treatment. Combined treatments with laser and hypertonic glucose sclerotherapy have been described with excellent results, but limited to treatment of veins of ≤2 mm in diameter. Cryo laser after foam sclerotherapy is a procedure to treat reticular veins in the lower extremities that utilizes first foam sclerotherapy with polidocanol than immediately followed by transdermal Nd:YAG 1064 laser treatment and we can treat veins ≤5 mm. This report presents a successful case of varicose vein treatment using combined transdermal laser and sclerotherapy with foam sclerotherapy with polidocanol to treat veins >2.5 mm in diameter.

Enhanced In Vitro Efficacy of Verbascoside in Suppressing Hepatic Stellate Cell Activation via ROS Scavenging with Reverse Microemulsion

Numerous approaches targeting hepatic stellate cells (HSCs) have emerged as pivotal therapeutic strategies to mitigate liver fibrosis and are currently undergoing clinical trials. The investigation of herbal drugs or isolated natural active compounds is particularly valuable, due to their multifaceted functions and low risk of side effects. Recent studies have hinted at the potential efficacy of verbascoside (VB) in ameliorating renal and lung fibrosis, yet its impact on hepatic fibrosis remains to be elucidated. This study aims to evaluate the potential effects of VB on liver fibrosis by assessing its ability to inhibit HSC activation. VB demonstrated significant efficacy in suppressing the expression of fibrogenic genes in activated LX-2 cells. Additionally, VB inhibited the migration and proliferation of these activated HSCs by scavenging reactive oxygen species (ROS) and downregulating the AMPK pathway. Furthermore, a biosafe reverse microemulsion loaded with VB (VB-ME) was developed to improve VB's instability and low bioavailability. The optimal formulation of VB-ME was meticulously characterized, revealing substantial enhancements in cellular uptake, ROS-scavenging capacity, and the suppression of HSC activation.

Characterization of emulgels formulated with phycocyanin and diutan gum as a novel approach for biocompatible delivery systems

Phycocyanin (PC), a protein derived from algae, is non-toxic and biocompatible. Due to its environmental and sustainable properties, it has been studied as an alternative stabilizer for food emulsions. In this sense, the main objective of this work is to evaluate the effectiveness of PC and its use in combination with diutan gum (DG), a biological macromolecule, to prepare emulgels formulated with avocado oil. Z-potential measurements show that the optimum pH for working with PC is 2.5. Furthermore, the system exhibited a structured interface at this pH. The surface tension did not decrease further above 1.5 wt% PC. Interestingly, emulsions formulated with >1.5 wt% PC showed recoalescence immediately after preparation. Although 1.5 wt% had the smallest droplet size, this emulsion underwent creaming due to the low viscosity of the system. DG was used in combination with PC to increase viscosity and reduce creaming. As little as 0.1 wt% DG was sufficient to form an emulgel when incorporated into the previous emulsion, which exhibited pseudoplastic behaviour and viscoelastic properties with very low creaming rates. However, the use of PC in combination with DG resulted in a non-aggregated and stable emulgel with 1.5 wt% PC and 0.1 wt% DG.

Raman Spectroscopy of Emulsions and Emulsion Chemistry

Emulsions are dispersed systems widely used in various industries. In recent years, Raman spectroscopy (RS), as a spectroscopic technique, has gained much attention for measuring and monitoring emulsions. In this review, we explore the use of RS on emulsion structures and emulsification, important reactions that use emulsions such as emulsion polymerization, catalysis and cascading reactions, as well as various applications of emulsions. We explore how RS is used in emulsions, reactions and applications. RS is a powerful and versatile tool for studying emulsions, but there are also challenges in using RS to monitor emulsion processes, especially if they are rapid or volatile. We also explore these challenges and difficulties, as well as possible designs that can be used to overcome them.

Physico-biological and in vivo evaluation of irisin loaded 45S5 porous bioglass granules for bone regeneration

In this study, we investigated the physico-biological and in-vivo evaluation of irisin loaded 45S5 bioglass bone graft for enhancing osteoblastic differentiation and bone regeneration in rat femur head defect model. Highly porous structure was obtained in the bioglass by burn-out process with varying the concentration of poly (methyl methacrylate) (PMMA) spheres. 10 % polyvinyl alcohol (PVA) was used as a binder for the sustain releasing of irisin on porous bioglass. Different concentrations of irisin were loaded on the selected bioglass samples and these were further evaluated for the biocompatibility and osteoblastic differentiation properties. The in vitro results demonstrated not only its biocompatibility but also that it stimulated pre-osteoblast differentiation. The in vivo data showed new bone formation as well as expression of osteogenic proteins like alkaline phosphatase (ALP), Runt-related transcription factor 2 (Runx-2), osteopontin (OPN), and collagen-1 (Col-1). Our results support the use of irisin loaded bioglass for the use of early bone regeneration.

Near-Infrared Spectroscopy Coupled with Chemometrics and Artificial Neural Network Modeling for Prediction of Emulsion Droplet Diameters

There is increased interest in the food industry for emulsions as delivery systems to preserve the stability of sensitive biocompounds with the aim of improving their bioavailability, solubility, and stability; maintaining their texture; and controlling their release. Emulsification in continuously operated microscale devices enables the production of emulsions of controllable droplet sizes and reduces the amount of emulsifier and time consumption, while NIR, as a nondestructive, noninvasive, fast, and efficient technique, represents an interesting aspect for emulsion investigation. The aim of this work was to predict the average Feret droplet diameter of oil-in-water and oil-in-aqueous mint extract emulsions prepared in a continuously operated microfluidic device with different emulsifiers (PEG 1500, PEG 6000, and PEG 20,000) based on the combination of near-infrared (NIR) spectra with chemometrics (principal component analysis (PCA) and partial least-squares (PLS) regression) and artificial neural network (ANN) modeling. PCA score plots for average preprocessed NIR spectra show the specific grouping of the samples into three groups according to the emulsifier used, while the PCA analysis of the emulsion samples with different emulsifiers showed the specific grouping of the samples based on the amount of emulsifier used. The developed PLS models had higher R² values for oil-in-water emulsions, ranging from 0.6863 to 0.9692 for calibration, 0.5617 to 0.8740 for validation, and 0.4618 to 0.8692 for prediction, than oil-in-aqueous mint extract emulsions, with R² values that were in range of 0.8109-0.8934 for calibration, 0.5017-0.6620, for validation and 0.5587-0.7234 for prediction. Better results were obtained for the developed nonlinear ANN models, which showed R² values in the range of 0.9428-0.9917 for training, 0.8515-0.9294 for testing, and 0.7377-0.8533 for the validation of oil-in-water emulsions, while for oil-in-aqueous mint extract emulsions R² values were higher, in the range of 0.9516-0.9996 for training, 0.9311-0.9994 for testing, and 0.8113-0.9995 for validation.

Simple formulation and characterization of double emulsion variant designed to carry three bioactive agents

Multiple emulsions are thermodynamically stable systems that mark applications in various fields including drug delivery systems. They allow enhanced availability of drugs, greater absorption, and present reduced toxicity, among other desirable properties. In this work, we aimed to formulate a unique double emulsion (O1/W + W1/O2/W/W) with three bioactive components viz. Ocimum tenuiflorum oil, Cocos nucifera oil and crystalline Cinnamomum camphora. Three surfactants with different HLB values viz. Tween-20, Tween-80 and Triton X-100 were used for the emulsification process. The method followed was simple as compared to current methods employed for formulating multiple emulsions. Formulation was characterized using techniques of bright field microscopy, Dynamic Light Scattering (DLS), High-Resolution Transmission Electron Microscopy (HR-TEM) and Fourier-transform infrared spectroscopy (FTIR). Image processing tools were also used to characterize the formulation, which reliably cross-verified the observations from conventional characterization techniques. The potency of individual components of emulsion was compared with the prepared double emulsion model by testing the activity on two pathologically relevant bacterial strains: Fusobacterium nucleatum (FN) and Porphyromonas gingivalis (PG).

Investigating the molecular structure of plasma in type 2 diabetes mellitus and diabetic nephropathy by synchrotron Fourier-transform infrared microspectroscopy

Diabetes mellitus (DM) is associated with a high incidence of morbidity and mortality which, in many cases, is derived from the progressive kidney dysfunction due to diabetic nephropathy (DN). In this study, synchrotron-Fourier-transform infrared (SR-FTIR) microspectroscopy was used to identify molecular changes in the lipid and protein regions in the plasma of patients with different stages of DN (mild, moderate, severe and end-stage), and patients with type 2 diabetes mellitus (T2DM) without DN. Our results revealed different conformational changes in the proteins secondary structure between DN stages, and between DN and T2DM groups illustrated by peak shifts and intensity alterations. End-stage DN showed the highest CH₂/CH₃ ratio and intensity of the carbonyl group in protein-carbonyl region compared to other DN stages indicating high level of unsaturation and lipid peroxidation and oxidation conditions. Moreover, end-stage DN group was characterized by a decrease in amide I and amide II absorption signals which reflected a sign of hypoalbuminemia. When compared to T2DM, DN group demonstrated a higher oxidation state as confirmed via the high intensity of the carbonyl group and the high level of malondialdehyde. The current study highlights the promising role of SR-FTIR microspectroscopy as a new sensitive analytical approach that can be used to provide better understanding of the pathophysiology of DN, and guide the development of new preventive therapies and treatments.

Spectral Properties of Foams and Emulsions

The optical and spectral properties of foams and emulsions provide information about their micro-/nanostructures, chemical and time stability and molecular data of their components. Foams and emulsions are collections of different kinds of bubbles or drops with particular properties. A summary of various surfactant and emulsifier types is performed here, as well as an overview of methods for producing foams and emulsions. Absorption, reflectance, and vibrational spectroscopy (Fourier Transform Infrared spectroscopy-FTIR, Raman spectroscopy) studies are detailed in connection with the spectral characterization techniques of colloidal systems. Diffusing Wave Spectroscopy (DWS) data for foams and emulsions are likewise introduced. The utility of spectroscopic approaches has grown as processing power and analysis capabilities have improved. In addition, lasers offer advantages due to the specific properties of the emitted beams which allow focusing on very small volumes and enable accurate, fast, and high spatial resolution sample characterization. Emulsions and foams provide exceptional sensitive bases for measuring low concentrations of molecules down to the level of traces using spectroscopy techniques, thus opening new horizons in microfluidics.

Dihydroartemisinin-Loaded Chitosan Nanoparticles Inhibit the Rifampicin-Resistant Mycobacterium tuberculosis by Disrupting the Cell Wall

Tuberculosis (TB) caused by Mycobacterium tuberculosis (MTB) is a deadly infection, and increasing resistance worsens an already bad scenario. In this work, a new nanomedicine antibacterial agent, based on dihydroartemisinin (DHA) and chitosan (CS), has been successfully developed to overcome MTB's drug-resistant. To enhance DHA's solubility, we have prepared nanoparticles of DHA loaded CS by an ionic crosslinking method with sodium tripolyphosphate (STPP) as the crosslinking agent. The DHA-CS nanoparticles (DHA-CS NPs) have been fully characterized by scanning electron microscopy, Fourier transforms infrared spectroscopy, dynamic light scattering, and ultraviolet spectrophotometry. DHA-CS NPs show an excellent antibacterial effect on the rifampicin (RFP)-resistant strain (ATCC 35838) and, at a concentration of 8.0 μg/ml, the antibacterial impact reaches up to 61.0 ± 2.13% (n = 3). The results of Gram staining, acid-fast staining, auramine "O" staining and electron microscopy show that the cell wall of RFP-resistant strains is destroyed by DHA-CS NPs (n = 3), and it is further verified by gas chromatography-mass spectrometry. Since all the metabolites identified in DHA-CS NPs treated RFP-resistant strains indicate an increase in fatty acid synthesis and cell wall repair, it can be concluded that DHA-CS NPs act by disrupting the cell wall. In addition, the resistance of 12 strains is effectively reduced by 8.0 μg/ml DHA-CS NPs combined with RFP, with an effective rate of 66.0%. The obtained results indicate that DHA-CS NPs combined with RFP may have potential use for TB treatment.

Editorial: Trends in Optical/Laser Spectroscopy and Applications

Optics and optical spectroscopy are dynamic fields that are developing very fast nowadays, triggered by (i) the need to go deeper in the scientific approach to nature's processes and phenomena, (ii) the evolution of applications in technological and industrial processes, art conservation, environment protection and cosmic space, and (iii) the sometimes hard to predict evolutions of knowledge in science, life sciences, artistic culture, technology and industrial processes [...].

Multispectroscopic and Molecular Docking Insight into Elucidating the Interaction of Irisin with Rivastigmine Tartrate: A Combinational Therapy Approach to Fight Alzheimer's Disease

This study was aimed to study the interaction between purified irisin and rivastigmine tartrate (RT), a cholinesterase inhibitor used in Alzheimer's therapy. Irisin mainly promotes brown fat-like features in white adipose tissues; however, it has some important role in the nervous system also, i.e., capable of opposing synapse and memory failure in Alzheimer's disease (AD). The recombinant protein was purified by Ni-NTA chromatography and characterized using spectroscopic and in silico techniques. Further, the mechanism of interaction between irisin and RT was investigated using various biophysical techniques. Fluorescence quenching studies suggested that there exists a moderate binding between irisin and RT with a binding constant (K) of 10⁴ M^-1 and the irisin-RT complex is guided by a combination of both static and dynamic modes of quenching. Thermodynamic parameters suggested the reaction to be driven by hydrogen bonding, making it specific. FTIR and CD spectroscopy suggested no secondary structural alterations in irisin in the presence of RT. Molecular docking investigation provided an insight into the important residues that play a key role in irisin-RT interactions. This study delineates an important finding in AD therapy and can provide a platform further to explore the potential of irisin in AD treatment.

Behaviors of Perfluorocarbon Emulsion during Dissolution of Oxide Layers

This study investigates the dissolution behavior of oxide layers containing radionuclides using perfluorocarbon (PFC) emulsion as a reusable medium. Chemicals such as PFC, anionic surfactant, and H₂SO₄ are used for preparing the PFC emulsion, and emulsified using an ultrasonication process. The FTIR results show O–H stretching that is formed by the interaction of the carboxyl group of the anionic surfactant with the hydroxyl group of water containing H₂SO₄, and find that the H₂SO₄ can be homogeneously dispersed in the PFC–anionic surfactant–H₂SO₄ emulsion. The dissolution test of the simulated Cr₂O₃ specimen is conducted using PFC emulsion containing KMnO₄. Through the weight losses of specimens and Scanning Electron Microscope-Energy Dispersive X-ray Spectrometer (SEM-EDS) analysis, it is confirmed that the Cr₂O₃ layer on the SUS304 specimen is easily dissolved using PFC emulsion. During the dissolution of the Cr₂O₃, it is observed that the dispersed H₂SO₄–KMnO₄ became unstable and separated from PFC emulsion. Based on these results, the behavior of the PFC emulsion during the dissolution of the oxide layer is explained.

Targeted Hybrid Nanocarriers as a System Enhancing the Skin Structure

The skin is constantly exposed to external and internal factors that disturb its function. In this work, two nanosystems-levan nanoparticles and a surfactin-stabilized nanoemulsion were preserved (tested for microbial growth) and characterized (size, polydispersity, Zeta potential, and stability). The nanosystems were introduced in the model formulations-cream, tonic, and gel, and confirmed by TEM. The analysis showed that nanoemulsion has a spherical morphology and size 220-300 nm, while levan nanoparticles had irregular shapes independently of the use of matrix and with particle size (130-260 nm). Additionally, we examined the antiradical effect of levan nanoparticles and nanoemulsion in the prototype of formulations by scavenging DPPH (2,2-diphenyl-1-picrylhydrazyl; EPR spectroscopy). The model cream with both nanosystems and the whole range of products with nanosystems were evaluated in vivo for hydration, elasticity, smoothness, wrinkles and vascular lesions, discoloration, respectively. The cream improved skin condition in all tested parameters in at least 50% of volunteers. The use of more comprehensive care, additionally consisting of a tonic and gel, reduced the previously existing skin discoloration to 10.42 ± 0.58%. The presented prototype formulations are promising in improving skin conditions.

Organometallic Complex Strongly Impairs Chikungunya Virus Entry to the Host Cells

Chikungunya fever is a disease caused by the Chikungunya virus (CHIKV) that is transmitted by the bite of the female of Aedes sp. mosquito. The symptoms include fever, muscle aches, skin rash, and severe joint pains. The disease may develop into a chronic condition and joint pain for months or years. Currently, there is no effective antiviral treatment against CHIKV infection. Treatments based on natural compounds have been widely studied, as many drugs were produced by using natural molecules and their derivatives. Alpha-phellandrene (α-Phe) is a naturally occurring organic compound that is a ligand for ruthenium, forming the organometallic complex [Ru2Cl4(p-cymene)2] (RcP). Organometallic complexes have shown promising as candidate molecules to a new generation of compounds that presented relevant biological properties, however, there is a lack of knowledge concerning the anti-CHIKV activity of these complexes. The present work evaluated the effects of the RcP and its precursors, the hydrate ruthenium(III) chloride salt (RuCl3⋅xH2O) (Ru) and α-Phe, on CHIKV infection in vitro. To this, BHK-21 cells were infected with CHIKV-nanoluciferase (CHIKV-nanoluc), a viral construct harboring the nanoluciferase reporter gene, at the presence or absence of the compounds for 16 h. Cytotoxicity and impact on infectivity were analyzed. The results demonstrated that RcP exhibited a strong therapeutic potential judged by the selective index > 40. Antiviral effects of RcP on different stages of the CHIKV replicative cycle were investigated; the results showed that it affected early stages of virus infection reducing virus replication by 77% at non-cytotoxic concentrations. Further assays demonstrated the virucidal activity of the compound that completely blocked virus infectivity. In silico molecular docking calculations suggested different binding interactions between aromatic rings of RcP and the loop of amino acids of the E2 envelope CHIKV glycoprotein mainly through hydrophobic interactions. Additionally, infrared spectroscopy spectral analysis indicated interactions of RcP with CHIKV glycoproteins. These data suggest that RcP may act on CHIKV particles, disrupting virus entry to the host cells. Therefore, RcP may represent a strong candidate for the development of anti-CHIKV drugs.