Valorization of Mushroom By-Products as a Source of Value-Added Compounds and Potential Applications

Biofoams with untapped enzymatic potential produced from beer bagasse by indigenous fungal strains

White rot fungi are promising organisms for the production of mycelial-based biofoams, providing a sustainable means of valorizing lignocellulosic wastes. This study explores the utilization of two indigenous fungal species, isolated from Argentina and belonging to the genera Trametes, for producing biofoams from brewery waste. The resulting biofoams exhibited an average density of 0.30 g cm-3, a Young's modulus of approximately 1 MPa, and a compressive stress of around 19 MPa. Additionally, the variation of laccase activity throughout the biofoam production process was evaluated. Surprisingly, residual laccase activity was detected in the biofoams following oven drying at temperatures of 60, 80, and 100 °C. This detection highlights the untapped enzymatic potential of the biofoams and positions them as promising green catalysts for various biotechnological applications.

Hydroalcoholic Extracts from Pleurotus ostreatus Spent Substrate with Nematocidal Activity against Nacobbus aberrans Phytonematode and the Non-Target Species Panagrellus redivivus

Pleurotus ostreatus, an edible mushroom widely consumed worldwide, generates a by-product known as spent mushroom substrate (SMS). This material has demonstrated biological activity against agricultural crop pathogens. In this study, we evaluated the nematocidal effectiveness of hydroalcoholic extracts (T5, T2, AT5, and AT2) derived from SMS of P. ostreatus against (J2) of the phytonematode Nacobbus aberrans and assessed their potential toxicity towards the non-target nematode Panagrellus redivivus. Among these extracts, AT5 exhibited the highest efficacy against N. aberrans and was the least toxic against P. redivivus. Liquid-liquid partitioning yielded the AQU fraction, which showed significant nematocidal activity against J2 (75.69% ± 8.99 mortality), comparable to chitosan. The GC-MS analysis revealed the presence of several compounds, including palmitic acid, linoleic acid, and 2,4-Di-tert-butylphenol. These findings are consistent with studies confirming the antagonistic effectiveness of these compounds against phytonematodes. Additionally, all extracts exhibited toxicity against P. redivivus, with T2 being the most toxic. Our findings demonstrate that while the AT5 extract displays antagonistic effectiveness against both N. aberrans and P. redivivus, it was the least toxic among the extracts tested. Thus, SMS of P. ostreatus holds potential as a source of nematocidal compounds, which could offer significant benefits for agricultural pest control.

From waste to protein: a new strategy of converting composted distilled grain wastes into animal feed

Distilled grain waste (DGW) is rich in nutrients and can be a potential resource as animal feed. However, DGW contains as much as 14% lignin, dramatically reducing the feeding value. White-rot fungi such as Pleurotus ostreatus could preferentially degrade lignin with high efficiency. However, lignin derivatives generated during alcohol distillation inhibit P. ostreatus growth. Thus, finding a new strategy to adjust the DGW properties to facilitate P. ostreatus growth is critical for animal feed preparation and DGW recycling. In this study, three dominant indigenous bacteria, including Sphingobacterium thermophilum X1, Pseudoxanthomonas byssovorax X3, and Bacillus velezensis 15F were chosen to generate single and compound microbial inoculums for DGW composting to prepare substrates for P. ostreatus growth. Compared with non-inoculated control or single microbial inoculation, all composite inoculations, especially the three-microbial compound, led to faster organic metabolism, shorter composting process, and improved physicochemical properties of DGW. P. ostreatus growth assays showed the fastest mycelial colonization (20.43 μg·g-1 ergosterol) and extension (9 mm/d), the highest ligninolytic enzyme activities (Lac, 152.68 U·g-1; Lip, 15.56 U·g-1; MnP, 0.34 U·g-1; Xylanase, 10.98 U·g-1; FPase, 0.71 U·g-1), and the highest lignin degradation ratio (30.77%) in the DGW sample after 12 h of composting with the three-microbial compound inoculation when compared to other groups. This sample was relatively abundant in bacteria playing critical roles in amino acid, carbohydrate, energy metabolism, and xenobiotic biodegradation, as suggested by metagenomic analysis. The feed value analysis revealed that P. ostreatus mycelia full colonization in composted DGW led to high fiber content retention and decreased lignin content (final ratio of 5% lignin) but elevated protein concentrations (about 130 g·kg-1 DM). An additional daily weight gain of 0.4 kg/d was shown in cattle feeding experiments by replacing 60% of regular feed with it. These findings demonstrate that compound inoculant consisting of three indigenous microorganisms is efficient to compost DGW and facilitate P. ostreatus growth. P. ostreatus decreased the lignin content of composted DGW during its mycelial growth, improving the quality of DGW for feeding cattle.

Exploring Phenolic Compounds in Crop By-Products for Cosmetic Efficacy

Phenolic compounds represent a group of secondary metabolites that serve essential functions in plants. Beyond their positive impact on plants, these phenolic metabolites, often referred to as polyphenols, possess a range of biological properties that can promote skin health. Scientific research indicates that topically using phenolics derived from plants can be advantageous, but their activity and stability highly depend on storage of the source material and the extraction method. These compounds have the ability to relieve symptoms and hinder the progression of different skin diseases. Because they come from natural sources and have minimal toxicity, phenolic compounds show potential in addressing the causes and effects of skin aging, skin diseases, and various types of skin damage, such as wounds and burns. Hence, this review provides extensive information on the particular crops from which by-product phenolic compounds can be sourced, also emphasizing the need to conduct research according to proper plant material storage practices and the choice of the best extracting method, along with an examination of their specific functions and the mechanisms by which they act to protect skin.

Impact of Lactic Acid Bacteria Fermentation Based on Biotransformation of Phenolic Compounds and Antioxidant Capacity of Mushrooms

Mushrooms contain phenolic compounds that possess health-promoting properties, including antioxidant effects. However, the low solubility and form of phenolic compounds affect their bioactivity and bioaccessibility. To overcome this limitation, our study investigates the fermentation of mushrooms to increase their free phenolic content and enhance their bioactivity. Our research focused on the impact of fermentation on both free and bound phenolic fractions (FPs and BPs, respectively) in Lentinula edodes and Lactarius deliciosus, which were successively fermented with Lactiplantibacillus plantarum LMG 17673 for 72 h. We examined the total phenolic content (TPC), phenolic profile, and antioxidant activity of both FPs and BPs. Our results showed that the TPC of BPs was higher than that of FPs in both mushrooms, with strong antioxidant capabilities. Fermentation significantly increased the TPC of FPs in both mushrooms, particularly after 24 h of fermentation. The TPC of BPs in mushrooms decreased during fermentation, indicating their release from the matrix. Additionally, we identified 30 bioactive compounds using UPLC-Q-TOF-MS/MS. Our study demonstrates for the first time that lactic acid bacteria fermentation of mushrooms with high phenolic content leads to the liberation of bound phenolics, enhancing their bioactivity and bioaccessibility.

Pre- and Postharvest Strategies for Pleurotus ostreatus Mushroom in a Circular Economy Approach

Mushroom cultivation presents a viable solution for utilizing agro-industrial byproducts as substrates for growth. This process enables the transformation of low-economic-value waste into nutritional foods. Enhancing the yield and quality of preharvest edible mushrooms, along with effectively preserving postharvest mushrooms, stands as a significant challenge in advancing the industry. Implementing pre- and postharvest strategies for Pleurotus ostreatus (Jacq.) P. Kumm (oyster mushroom) within a circular economy framework involves optimizing resource use, minimizing waste, and creating a sustainable and environmentally friendly production system. This review aimed to analyze the development and innovation of the different themes and trends by bibliometric analysis with a critical literature review. Furthermore, this review outlines the cultivation techniques for Pleurotus ostreatus, encompassing preharvest steps such as spawn production, substrate preparation, and the entire mushroom growth process, which includes substrate colonization, fruiting, harvesting, and, finally, the postharvest. While novel methodologies are being explored for maintaining quality and extending shelf-life, the evaluation of the environmental impact of the entire mushroom production to identify areas for improvement is needed. By integrating this knowledge, strategies can be developed for a more sustainable and circular approach to Pleurotus ostreatus mushroom cultivation, promoting environmental stewardship and long-term viability in this industry.

Sustainable Utilization of Mushroom By-Products Processed with a Combined Osmotic Dehydration Pretreatment and a Hot-Air-Drying Step

Mushroom production and consumption are gaining increased interest due to their unique flavor and nutritional value. However, in the mushroom industry, large amounts of by-products are generated, which have a high negative environmental and economic impact. In this study, an osmotic dehydration process followed by hot-air-drying was applied to mushroom stems to produce dried mushrooms as the end product. The osmotic dehydration conditions (concentration of hypertonic solution, specifically, 10-30% maltodextrin and 20-40% oligofructose; a treatment time of 40-80 min; and a temperature range of 30-50 °C) were optimized using response surface methodology (RSM). The results showed that a four-factor three-level Box-Behnken experimental design was effectively implemented to evaluate the effect of the process parameters and identify the optimal osmotic dehydration conditions for producing osmotically dehydrated mushrooms. The main factor affecting mass transfer was the osmosis temperature, and the optimal conditions were found to be 38 °C, 40% oligofructose and 19.3% maltodextrin as the osmotic agents, and 80 min of immersion time. Moreover, the results showed that osmotic pretreatment, in the optimal conditions, significantly reduced the required drying time of the by-products compared to traditional hot-air-drying, especially at milder drying temperatures. Consequently, the required energy was also reduced by at least 40% at 50 °C.

Untargeted metabolomics analysis of non-volatile metabolites and dynamic changes of antioxidant capacity in Douchi with edible mushroom by-products

This study investigated the non-volatile metabolites and antioxidant activity of Douchi, an edible mushroom by-product. A total of 695 non-volatile metabolites were detected using UPLC-MS/MS-based metabolomics analysis, and the greatest impact on metabolite composition was observed during Koji-making and the first 5 days of post-fermentation. Throughout the fermentation process, 366 differential metabolites were identified, with flavonoids being the most prominent followed by amino acids and their derivatives, which were found to be important for the quality of edible mushroom by-product Douchi (EMD). The antioxidant capacity of EMD significantly increased with the longer fermentation time, which might be associated with the conversion of isoflavone glycosides to aglycones, amino acids and their derivatives, free fatty acids, group A saponins, and phenolic acids. These findings suggested that different fermentation phases of EMD significantly affected the non-volatile metabolite profile and antioxidant capacity.

The Effects of Composite Alkali-Stored Spent Hypsizygus marmoreus Substrate on Carcass Quality, Rumen Fermentation, and Rumen Microbial Diversity in Goats

The objective of this study was to investigate the effects of composite alkali-stored spent Hypsizygus marmoreus substrate (SHMS) on carcass quality, rumen fermentation, and rumen microbial diversity in goats. Twenty-four 6-month-old Chuanzhong black goats with similar body weights (20 ± 5 kg) were selected and randomly divided into four groups (n = 6 per group) and received four treatments: 0% (control group, CG); 20% (low-addition group, LG); 30% (moderate-addition group, MG); and 40% (high-addition group, HG) of SHMS-replaced silage corn and oat hay. The experiment lasted for 74 days (including a 14 d adaptation period and a 60 d treatment period). The results of this study showed that MG and HG significantly improved the marble score of goat meat (p < 0.05). The flesh color score significantly increased in each group (p < 0.05). The fat color scores significantly increased in LG and MG (p < 0.05). There were no significant effects on the pH value or shear force of the longissimus dorsi in each group (p > 0.05). The cooking loss in MG was higher than that in CG (p < 0.05). The histidine and tyrosine contents in each group of muscles significantly increased (p < 0.05), with no significant effect on fatty acids (p > 0.05). The rumen pH of MG significantly decreased (p < 0.05), while the total volatile fatty acids (TVFAs) and ammoniacal nitrogen (NH3-N) increased by 44.63% and 54.50%, respectively. The addition of the SHMS altered both the alpha and beta diversities of the rumen microbiota and significant differences in the composition and structure of the four microbial communities. The dominant bacterial phylum in each group were Firmicutes and Bacteroidetes, with Prevotella 1 as the dominant bacterial genus. Correlation analysis revealed that rumen bacteria are closely related to the animal carcass quality and rumen fermentation. In the PICRUSt prediction, 21 significantly different pathways were found, and the correlation network showed a positive correlation between the Prevotella 1 and 7 metabolic pathways, while the C5-branched dibasic acid metabolism was positively correlated with nine bacteria. In summary, feeding goats with an SHMS diet can improve the carcass quality, promote rumen fermentation, and alter the microbial structure. The research results can provide a scientific reference for the utilization of SHMS as feed in the goat industry.

Enhancing Biomass and β-Glucan Yield from Oyster Mushroom Pleurotus ostreatus (Agaricomycetes) Mycelia through Extract Valorization

This study aimed to examine the impact of mushroom extract-based solid media on the β-glucan content, growth rate, density, and biomass content of Pleurotus ostreatus (oyster mushroom) mycelia. Fresh, high-quality raw P. ostreatus were washed, sliced, and heated in a sealed pressure cooker at 90°C for 4 h in the drying cabinet. Following the heating process, centrifugation was carried out. Different concentrations of Pleurotus ostreatus extract were mixed with distilled water (0%, 25%, 50%, 75%, and 100%) and prepared for a sterile solid media. A malt extract-based medium was maintained as a control. This study focuses on the growth performance of P. ostreatus mycelium on its own mushroom extract-based culture medium which holds considerable economic and environmental significance. During the six-day observation period, the mycelium exhibited consistent growth across all tested media, maintaining a steady growth rate of 15 mm. The increased content of mushroom extract resulted from the enhanced density of the mycelia and biomass content. It can be inferred that when media containing less than 25% of mushroom extract dilution is used, β-glucan can be formed in smaller amounts. Further research is needed to explore mushroom extract derived from different types of mushroom byproducts, which fail to meet commercial standards.

Dietary Bioactive Compounds: Implications for Oxidative Stress and Inflammation

Nowadays, it has been amply demonstrated how an appropriate diet and lifestyle are essential for preserving wellbeing and preventing illnesses [...].

Grey Correlation Analysis of Drying Characteristics and Quality of Hypsizygus marmoreus (Crab-Flavoured Mushroom) By-Products

The physical properties and nutritional quality of H. marmoreus by-products (HMB) dried by different methods were comprehensively evaluated by a rigorous statistical method of grey correlation analysis. The results indicated that different drying methods had significant impacts on the characteristics of HMB. Heat pump drying (HPD) was conducive to the preservation of protein and reducing sugar, and hot air drying (HAD) maintained a high content of total flavonoids. The highest fat, polysaccharide, and total phenolic contents were obtained by heated vacuum freeze-drying (H-VFD) treatment. The unheated vacuum freeze-drying (UH-VFD) treatment achieved bright colour, lacunose texture profile, and looser organization structure. The grey correlation analysis showed that UH-VFD and H-VFD had higher-weighted correlation degrees than HPD and HAD. HMB had many higher nutritional components than commodity specifications, especially protein, fat, polyphenols, and amino acids, and had potential applications in the food industry as functional foods and nutraceutical agents.

A novel approach in valorization of spent mushroom substrate of Cordyceps militaris as in-feed antibiotics in Labeo rohita against Aeromonas hydrophila infection

The study was carried out to investigate Cordyceps militaris spent mushroom substrate (CMSMS), a renewable biomass, for its effect on fish as an alternative source of in-feed antibiotics. For meticulous examination, four different iso-nitrogenous and iso-caloric diets were prepared containing CMSMS at 0%, 1%, 2%, and 3%. A total of 360 Labeo rohita fingerlings with an average initial weight and length of 12.6 ± 0.04g and 10 ± 0.1 cm, respectively, were blocked into 4 treatments with 3 replicates, i.e., T1 (control), T2 (10 g/kg), T3 (20 g/kg), and T4 (30 g/kg). The feeding trial was conducted for 60 days with samplings on the 7th, 15th, 30th, and 60th days, and blood samples were collected to determine different immunological (NBT, TIg, lysozyme, and antiprotease activity) and biochemical (glucose, total protein, SGPT) parameters. A challenge study was conducted against Aeromonas hydrophila at the end of the feeding trial. The results showed that CMSMS at 30g/kg showed a better immune response over time with increasing doses. All the biochemical readings fall within normal ranges. Fish fed with CMSMS at 30g/kg (3%) have better survival after being challenged with Aeromonas hydrophila. Therefore, Cordyceps militaris spent mushroom substrate (CMSMS) can be biosafely used as in-feed antibiotics in Labeo rohita and can reduce the concern of by-product disposal from mushroom cultivation.

Food By-Products and Agro-Industrial Wastes as a Source of β-Glucans for the Formulation of Novel Nutraceuticals

Food and agro-industrial by-products provoke a great environmental and economic impact that must be minimized by adding value to these wastes within the framework of circular economy. The relevance of β-glucans obtained from natural sources (cereals, mushrooms, yeasts, algae, etc.), in terms of their interesting biological activities (hypocholesterolemic, hypoglycemic, immune-modulatory, antioxidant, etc.), has been validated by many scientific publications. Since most of these by-products contain high levels of these polysaccharides or can serve as a substrate of β-glucan-producing species, this work reviewed the scientific literature, searching for studies that utilized food and agro-industrial wastes to obtain β-glucan fractions, attending to the applied procedures for extraction and/or purification, the characterization of the glucans and the tested biological activities. Although the results related to β-glucan production or extraction using wastes are promising, it can be concluded that further research on the glucans’ characterization, and particularly on the biological activities in vitro and in vivo (apart from antioxidant capacity), is required to reach the final goal of formulating novel nutraceuticals based on these molecules and these raw materials.

Extraction and utilization of active substances from edible fungi substrate and residue: A review

The expansion of the edible fungi industry has resulted in the production of large amounts of edible fungus residues, causing great pressure on environmental protection.Therefore, research on edible fungus residue utilization has become a controversial issue. Thus far, numerous efforts have been devoted to separate active substances from edible fungus substrates and residues for high application value utilization. Building upon this, the main methods for extracting active substances from edible mushroom residues are reviewed, and the mechanisms, influencing factors, and trade-offs of the various methods are analysed. Furthermore, the existing and possible directions of utilization of the extracted active substances are reviewed and discussed. Finally, challenges and prospects for the extraction and utilization of different substances in edible fungus residues are proposed. This review provides an effective strategy for protecting the ecological environment and promoting the sustainable development of human society.

Assessment of nutrient contents and bio-functional activities of edible fungus bio-fortified with copper, lithium and zinc

Bio-enrichment of edible mushrooms is an outstanding strategy to deliver essential nutrients to human. In this study, an edible fungus; Pleurotus pulmonarius was cultivated on spent mushroom substrate (SMS) supplemented with copper, lithium, and zinc. Proximate and mineral analysis of cultivated mushroom was determined using methods of AOAC. Antimicrobial activity of cultivated mushroom was assessed against microorganisms using agar well diffusion. Antioxidant property of mushroom was assessed against free radicals. Similar (p ≤ 0.05) protein contents of 18.93%, 18.80% and 17.90% were respectively obtained in P. pulmonarius biofortified with Cu + Li + Zn, Cu + Zn and Zn. Crude fibre in element fortified-mushroom ranged from 9.02 to 10.11%, while non-fortified mushroom was 8.66%. Copper content of P. pulmonarius fortified with Cu alone and Cu + Zn were 96.12 mg/100 g and 98.09 mg/100 g, respectively. Mushroom fortified with Zn has the highest zinc content of 520.15 mg/100 g. Mushroom fortified with Li and Li + Zn have a similar (p ≤ 0.05) Li content of 106.02 mg/100 g and 104.30 mg/100 g, respectively. Extract from mushroom-fortified with copper has the highest zone of inhibition (15.1 mm) against Klebsiella pneumoniae at 1.0 mg/ml. Mushroom fortified with Cu + Li + Zn and Li + Zn, respectively have similar (p ≤ 0.05) scavenging activities of 79.10 and 81.0% against DPPH. Mushroom fortified with Zn or Zn + Cu enhanced the growth of Lactobacillus acidophilus and Lactobacillus plantarum. Antimicrobial, antioxidant and prebiotic activities of fortified-mushroom could be attributed to arrays of phytochemicals and bio-accumulated elements. Hence, bio-fortified mushrooms can be used as functional foods and as biopharmaceuticals to treat ailments associated with nutrient deficient.

Valorization of spent mushroom substrate in combination with agro-residues to improve the nutrient and phytohormone contents of vermicompost

In recent years, enormous amounts of spent mushroom substrate (SMS) have been generated because of the rapid development of mushroom production. Since the conventional disposal methods of these residues can cause serious environmental problems, alternative waste management techniques are required to ensure sustainable agriculture. However, SMS might be not suitable for vermicomposting when used alone. Therefore, the primary purpose of this study was to investigate the effect of Azolla microphylla (Azolla) biomass, eggshells, fruit peels, and cassava pulp on the biodegradation process of SMS. The results showed the treatments supplemented with cassava pulp and fruit peel waste improved the growth of earthworms, while the carbon-to-nitrogen ratio of these vermicomposts decreased significantly (p < 0.05) due to the improved total nitrogen contents (7.64 g kg^-1 and 6.71 g kg^-1). Concerning the degradation process and the vermicompost quality, the addition of these agro-residues facilitated the enzyme activities (cellulase, urease, and alkaline phosphatase) and increased the total macronutrient (P, K, Mg, and Ca) and phytohormone (fruit peel waste: AA, GA3, and cytokinin; cassava pulp: cytokinin) contents of the final products compared to the control treatment. On the other hand, Azolla had no additional effect on the fecundity and growth of Eudrilus eugenia. Meanwhile, the treatment supplemented with eggshells was high in Mg (7.15 g kg^-1) and Ca (305.6 g kg^-1). Overall, the combined decomposition of SMS-based bedding material with Azolla, eggshells, fruit peel waste, and cassava pulp resulted in mature organic fertilizers with improved chemical properties.

Valorization of mushroom by-products: a review

With the rapid growth of the global economy and the global population, the production of solid waste has increased remarkably. Mushrooms are gaining popularity among researchers for their ability to turn waste into nutrients. However, a large number of by-products are produced during the industrial processing of mushrooms. Traditional waste management, focusing on the utilization and disposal of mushroom by-products, has attracted the attention of researchers. Meanwhile, the circular economy has become a multidisciplinary research field, and the valorization of mushroom by-products is a very important part of circular economy research. Various mushroom by-products of mushroom are reviewed in this paper. By-products are used in food as raw materials or functional components, in livestock and poultry feed after grinding/fermentation, and as electrochemical materials and papermaking materials. The by-products can also be used to produce ethanol and other biological sources of energy, as absorbing substances in sewage treatment, and as fertilizer in soil amendment. Mushroom processing by-products can be applied in various fields. To improve production efficiency, new extraction technology (including supercritical fluid technology and microwave extraction technology) can be adopted to increase the bioactive substance content in the by-products. Choosing appropriate processing temperature, time, and other processing conditions can also enhance product quality. Finally, more research is needed on the cost-effective utilization of the by-products and the feasibility of industrialization. © 2022 Society of Chemical Industry.

Co-Fermentation of Edible Mushroom By-Products with Soybeans Enhances Nutritional Values, Isoflavone Aglycones, and Antioxidant Capacity of Douchi Koji

Douchi is a traditional salt-fermented soybean food with various bioactivities, such as anti-oxidation, anti-diabetes, and anti-hypertension, which are greatly affected by the activities of protease and β-glucosidase during koji production. Edible mushroom by-products are ideal ingredients for enhancing food flavor and nutritional quality due to their unique nutritional characteristics of high protein, rich amino acids, and low calories. However, there is no research on the preparation of Douchi by the mixed fermentation of edible mushroom by-products and soybeans. In this study, response surface methodology (RSM) was used to optimize the fermentation conditions of edible mushroom by-product Douchi koji (EMDK) with protease and β-glucosidase activities as indicators, and the changes in the main bioactive compounds and antioxidant activities of unfermented raw samples (URS), Douchi koji without edible mushroom by-product (DKWE), and EMDK were compared. The results of single-factor tests and RSM showed that the optimal fermentation conditions of EMDK were the Aspergillus oryzae to Mucor racemosus ratio of 1:1, inoculation amount of 6%, edible mushroom amount of 21%, and fermentation time of 63 h, and the activities of protease and β-glucosidase under these conditions were 796.03 ± 15.01 U/g and 1175.40 ± 36.98 U/g, respectively. Additionally, compared with URS and DKWE, the contents of total isoflavones and β-glucoside isoflavones in EMDK were notably decreased, while the contents of amino nitrogen, total phenolics, total flavonoids, and aglycone isoflavone, as well as the antioxidant capacity were significantly increased. Furthermore, significant correlations were found between the above components and antioxidant capacity. These results showed that edible mushroom by-product could be incorporated into soybeans for co-fermentation, conferring higher nutritional value to and antioxidant capacity of Douchi koji.

Edible Mushrooms for Sustainable and Healthy Human Food: Nutritional and Medicinal Attributes

Global food production faces many challenges, including climate change, a water crisis, land degradation, and desertification. These challenges require research into non-traditional sources of human foods. Edible mushrooms are considered an important next-generation healthy food source. Edible mushrooms are rich in proteins, dietary fiber, vitamins, minerals, and other bioactive components (alkaloids, lactones, polysaccharides, polyphenolic compounds, sesquiterpenes, sterols, and terpenoids). Several bioactive ingredients can be extracted from edible mushrooms and incorporated into health-promoting supplements. It has been suggested that several human diseases can be treated with extracts from edible mushrooms, as these extracts have biological effects including anticancer, antidiabetic, antiviral, antioxidant, hepatoprotective, immune-potentiating, and hypo-cholesterolemic influences. The current study focuses on sustainable approaches for handling edible mushrooms and their secondary metabolites, including biofortification. Comparisons between edible and poisonous mushrooms, as well as the common species of edible mushrooms and their different bioactive ingredients, are crucial. Nutritional values and the health benefits of edible mushrooms, as well as different biomedical applications, have been also emphasized. Further research is needed to explore the economic sustainability of different medicinal mushroom bioactive compound extracts and their potential applications against emerging diseases such as COVID-19. New approaches such as nano-biofortification are also needed to supply edible mushrooms with essential nutrients and/or to increase their bioactive ingredients.

Green Biotechnology of Oyster Mushroom (Pleurotus ostreatus L.): A Sustainable Strategy for Myco-Remediation and Bio-Fermentation

The field of biotechnology presents us with a great chance to use many organisms, such as mushrooms, to find suitable solutions for issues that include the accumulation of agro-wastes in the environment. The green biotechnology of mushrooms (Pleurotus ostreatus L.) includes the myco-remediation of polluted soil and water as well as bio-fermentation. The circular economy approach could be effectively achieved by using oyster mushrooms (Pleurotus ostreatus L.), of which the substrate of their cultivation is considered as a vital source for producing biofertilizers, animal feeds, bioenergy, and bio-remediators. Spent mushroom substrate is also considered a crucial source for many applications, including the production of enzymes (e.g., manganese peroxidase, laccase, and lignin peroxidase) and bioethanol. The sustainable management of agro-industrial wastes (e.g., plant-based foods, animal-based foods, and non-food industries) could reduce, reuse and recycle using oyster mushrooms. This review aims to focus on the biotechnological applications of the oyster mushroom (P. ostreatus L.) concerning the field of the myco-remediation of pollutants and the bio-fermentation of agro-industrial wastes as a sustainable approach to environmental protection. This study can open new windows onto the green synthesis of metal-nanoparticles, such as nano-silver, nano-TiO2 and nano-ZnO. More investigations are needed concerning the new biotechnological approaches.

Mushrooms on the plate: Trends towards NAFLD treatment, health improvement and sustainable diets

Non-alcoholic fatty liver disease (NAFLD) is a most important cause of liver disease. Similar to other non-communicable diseases (NCD), such as obesity and type II diabetes mellitus, NAFLD can strongly affected by diet. Diet-related NCD and malnutrition are rising in all regions being a major cause of the global health, economic and environmental burdens. Mushrooms, important dietary components since the hunter-gathering communities, have increasingly gained momentum in biomedical research and therapeutics due to their interplay in metabolism traits. We emphasize here the beneficial effects of mushroom-enriched diets on the homeostasis of lipid and sugar metabolism, including their modulation, but also interfering with insulin metabolism, gut microbiota, inflammation, oxidative stress and autophagy. In this review, we describe the cellular and molecular mechanisms at the gut-liver axis and the liver-white adipose tissue (WAT) axis, that plausibly cause such positive modulation, and discuss the potential of mushroom-enriched diets to prevent or ameliorate NAFLD and related NCD, also within the shift needed towards healthy sustainable diets.

Production of Highly Porous Biochar Materials from Spent Mushroom Composts

The edible mushroom industry has grown significantly in recent years due to the dietary change and the demand for heathy food. However, the spent mushroom compost (SMC) will be produced in large quantities after the harvest, thus forming an agricultural waste requiring proper management other than dumping or burning. In this work, two types of SMCs with the cultivation of shiitake fungus (SF) and black fungus (BF) were converted into porous biochar products (a series of SMC-SF-BC and SMC-BF-BC) at higher pyrolysis temperatures (i.e., 400, 600 and 800 °C) based on their thermochemical characteristics, using thermogravimetric analysis (TGA). The pore and chemical properties of the resulting products, including surface area, pore volume, average pore size, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and Fourier Transform infrared spectroscopy (FTIR), were studied to correlate them with the most important process parameter. The results showed that the pore properties of the biochar products indicated a significant increase with the increase in the pyrolysis temperature from 400 to 600 °C. The data on the maximal Brunauer-Emmett-Teller (BET) surface area for the biochar products produced at 800 °C (i.e., SMC-SF-BC-800 and SMC-BF-BC-800) were found to be 312.5 and 280.9 m2/g, respectively. Based on the EDS and FTIR, plenty of oxygen-containing functional groups were found on the surface of the resulting biochar products.

Renewable mycelium based composite - sustainable approach for lignocellulose waste recovery and alternative to synthetic materials - a review

The agricultural waste with lignocellulose origin is considered to be one of the major environmental pollutants which, because of their high nutritional value, represent an extremely rich resource with significant potential for the production of value added bio-products. This review discusses the applications of higher fungi to upcycle abundant agricultural by-products into more sustainable materials and to promote the transition to a circular economy. It focuses on the main factors influencing the properties and application of mycelium composites - the feedstock, the basidiomycete species and their interaction with the feedstock. During controlled solid state cultivation on various lignocellulose substrates, the basidiomycetes of class Agaricomycetes colonize their surfaces and form a three-dimensional mycelium net. Fungal mycelium secretes enzymes that break down lignocellulose over time and are partially replaced by mycelium. The mycelium adheres to the residual undegraded substrates resulting in the formation of a high-mechanical-strength bio-material called a mycelium based bio-composite. The mycelium based bio-composites are completely natural, biodegradable and can be composted after their cycle of use is completed. The physicochemical, mechanical, and thermodynamic characteristics of mycelium based bio-composites are competitive with those of synthetic polymers and allow them to be successfully used in the construction, architecture, and other industries.

Antimicrobial Food Packaging with Biodegradable Polymers and Bacteriocins

Innovations in food and drink packaging result mainly from the needs and requirements of consumers, which are influenced by changing global trends. Antimicrobial and active packaging are at the forefront of current research and development for food packaging. One of the few natural polymers on the market with antimicrobial properties is biodegradable and biocompatible chitosan. It is formed as a result of chitin deacetylation. Due to these properties, the production of chitosan alone or a composite film based on chitosan is of great interest to scientists and industrialists from various fields. Chitosan films have the potential to be used as a packaging material to maintain the quality and microbiological safety of food. In addition, chitosan is widely used in antimicrobial films against a wide range of pathogenic and food spoilage microbes. Polylactic acid (PLA) is considered one of the most promising and environmentally friendly polymers due to its physical and chemical properties, including renewable, biodegradability, biocompatibility, and is considered safe (GRAS). There is great interest among scientists in the study of PLA as an alternative food packaging film with improved properties to increase its usability for food packaging applications. The aim of this review article is to draw attention to the existing possibilities of using various components in combination with chitosan, PLA, or bacteriocins to improve the properties of packaging in new food packaging technologies. Consequently, they can be a promising solution to improve the quality, delay the spoilage of packaged food, as well as increase the safety and shelf life of food.

Potential Usage of Edible Mushrooms and Their Residues to Retrieve Valuable Supplies for Industrial Applications

Currently, the food and agricultural sectors are concerned about environmental problems caused by raw material waste, and they are looking for strategies to reduce the growing amount of waste disposal. Now, approaches are being explored that could increment and provide value-added products from agricultural waste to contribute to the circular economy and environmental protection. Edible mushrooms have been globally appreciated for their medicinal properties and nutritional value, but during the mushroom production process nearly one-fifth of the mushroom gets wasted. Therefore, improper disposal of mushrooms and untreated residues can cause fungal disease. The residues of edible mushrooms, being rich in sterols, vitamin D2, amino acids, and polysaccharides, among others, makes it underutilized waste. Most of the published literature has primarily focused on the isolation of bioactive components of these edible mushrooms; however, utilization of waste or edible mushrooms themselves, for the production of value-added products, has remained an overlooked area. Waste of edible mushrooms also represents a disposal problem, but they are a rich source of important compounds, owing to their nutritional and functional properties. Researchers have started exploiting edible mushroom by-products/waste for value-added goods with applications in diverse fields. Bioactive compounds obtained from edible mushrooms are being used in media production and skincare formulations. Furthermore, diverse applications from edible mushrooms are also being explored, including the synthesis of biosorbent, biochar, edible films/coating, probiotics, nanoparticles and cosmetic products. The primary intent of this review is to summarize the information related to edible mushrooms and their valorization in developing value-added products with industrial applications.

Flexible Fungal Materials: Shaping the Future

Fungi are a revolutionary, smart, and sustainable manufacturing platform that can be used to upcycle byproducts and wastes into flexible fungal materials (FFMs) such as chitin- and β-glucan-based foams, paper, and textiles. With highly adaptable manufacturing pathways, the efficiency and properties of these materials depend on the biomass source and fermentation method. Liquid substrates provide fast, upscalable, and compact production processes but are susceptible to contamination and are limited to paper-like materials for printing, wound dressings, and membranes. Solid-state fermentation is cheaper but struggles to deliver homogeneous fungal growth and is used to produce fungal foams for packaging, insulation, textiles, and leather substitutes. The broad range of applications and uses of biological organisms in materials hallmarks fungi as forerunners in improving environmental sustainability globally.

Enzymatic activities and analysis of a mycelium-based composite formation using peach palm (Bactris gasipaes) residues on Lentinula edodes

By seeding fungus on top of industry residues, a mycelium can grow and form a compact network structure; however, it may not develop due to lack of optimal nutrients from the substrate. Consequently, peach-palm residues can be a potential alternative; so, to test this hypothesis, this work evaluates the effect of peach-palm residues as substrate for the growth of mycelium based on Lentinula edodes. They were also supplemented with cassava bran and various sources of nitrogen-ammonium sulphate, potassium nitrate, and soy flour—to analyse its effects on its physico-chemical, enzymatic activities, and thermal and mechanical properties of the final composite at 12 and 20 days of cultivation. This mycelium was able to grow at optimum source treatment conditions, which depends on the ratio of Carbon to Nitrogen, within only 12 days of inoculation. Furthermore, the enzyme activities directly correlate with the mycelium growth with optimum conditions of pH, water activity, and moisture for L. edodes to grow having lower enzyme activities for a well-developed composite; whereas higher activities were seen for a weakly developed material, and this material demonstrates mechanical and thermal properties similar to common mycelium-based composites. Therefore, this work demonstrates that peach-palm residues can be a potential alternative for mycelium-based composite.