Application of Ionic Liquids in Electrochemistry-Recent Advances

Controlling Ionic Conductivity in Organometallic Ionic Liquids through Light-Induced Coordination Polymer Formation and Thermal Reversion

Owing to their high ionic conductivity and negligible vapor pressure, ionic liquids (ILs) find applications in various electronic devices. However, fabricating IL-based photocontrollable devices remains a challenge. In this study, we developed organometallic ILs with reversible light- and heat-controlled ionic conductivities for potential use in tunable devices. The physical properties and stimulus responses of ILs containing a cationic sandwich Ru complex with two coordinating substituents were investigated. UV photoirradiation of these ILs triggered cation photodissociation, resulting in their transformation into viscoelastic coordination polymers wherein the coordinating substituents bridged the Ru centers. Owing to the anion coordination, salts with coordinating anions such as CF3SO2NCN-, B(CN)4-, and BF2(CN)2- exhibited faster response and higher conversion than those with noncoordinating anions including (FSO2)2N- and (CF3SO2)2N-. All photoproducts reverted to their original ILs upon heating, except for the photoproduct of the BF2(CN)2 salt, which decomposed upon heating. Light- and heat-induced reversible changes occur in most cases between the high-ionic-conductive IL state and low-ionic-conductive coordination polymer state. Unlike previously reported ILs with three or one cation substituent, the current ILs exhibited both high reactivity and large ionic conductivity changes.

N-octylpyridine hydrogen sulphate ionic liquid for multifunctional fluorescent response in different solvents

Ionic liquids (ILs) have attracted considerable interest in the last two decades owing to their unique fluorescent properties. Herein, N-octylpyridine hydrogen sulphate ([OP]HSO4) was synthesised and characterised using 1H NMR and infrared spectroscopies. In addition, the fluorescence spectra of [OP]HSO4 in water, methanol, ethanol and acetonitrile were studied. In a single solvent, as the concentration of the solvent (methanol, ethanol or acetonitrile) increases, the fluorescence intensity of the IL first increases and then decreases. A similar trend was observed in their mixed solvents with water. Moreover, the fluorescence intensity of [OP]HSO4 decreases with increasing temperature. A fluorescence intensity reduction of only 4.46% for [OP]HSO4 after continuous scanning for 40 cycles under the maximum excitation state was analysed. The lack of photobleaching observed in [OP]HSO4 indicates its good photobleaching resistance.

Mechanisms of Biological Effects of Ionic Liquids: From Single Cells to Multicellular Organisms

The review presents a detailed discussion of the evolving field studying interactions between ionic liquids (ILs) and biological systems. Originating from molten salt electrolytes to present multiapplication substances, ILs have found usage across various fields due to their exceptional physicochemical properties, including excellent tunability. However, their interactions with biological systems and potential influence on living organisms remain largely unexplored. This review examines the cytotoxic effects of ILs on cell cultures, biomolecules, and vertebrate and invertebrate organisms. Our understanding of IL toxicity, while growing in recent years, is yet nascent. The established findings include correlations between harmful effects of ILs and their ability to disturb cellular membranes, their potential to trigger oxidative stress in cells, and their ability to cause cell death via apoptosis. Future research directions proposed in the review include studying the distribution of various ILs within cellular compartments and organelles, investigating metabolic transformations of ILs in cells and organisms, detailed analysis of IL effects on proteins involved in oxidative stress and apoptosis, correlation studies between IL doses, exposure times and resulting adverse effects, and examination of effects of subtoxic concentrations of ILs on various biological objects. This review aims to serve as a critical analysis of the current body of knowledge on IL-related toxicity mechanisms. Furthermore, it can guide researchers toward the design of less toxic ILs and the informed use of ILs in drug development and medicine.

Counterion effects on the mesomorphic and electrochemical properties of guanidinium salts

Ionic liquid crystals (ILCs) combine the ion mobility of ionic liquids with the order and self-assembly of thermotropic mesophases. To understand the role of the anion in ILCs, wedge-shaped arylguanidinium salts with tetradecyloxy side chains were chosen as benchmark systems and their liquid crystalline self-assembly in the bulk phase as well as their electrochemical behavior in solution were studied depending on the anion. Differential scanning calorimetry (DSC), polarizing optical microscopy (POM) and X-ray diffraction (WAXS, SAXS) experiments revealed that for spherical anions, the phase width of the hexagonal columnar mesophase increased with the anion size, while for non-spherical anions, the trends were less clear cut. Depending on the anion, the ILCs showed different stability towards electrochemical oxidation and reduction with the most stable being the PF6 based compound. Cyclic voltammetry (CV) and density functional theory (DFT) calculations suggest a possible contribution of the guanidinium cation to the oxidation processes.

A machine learning-based QSAR model reveals important molecular features for understanding the potential inhibition mechanism of ionic liquids to acetylcholinesterase

The broad application of ionic liquids (ILs) has been hindered by uncertainties surrounding their ecotoxicity. In this work, a Quantitative Structure-Activity Relationship (QSAR) model was devised to predict the inhibition of ILs towards the activity of AChE, employing both Random Forest (RF) and eXtreme Gradient Boosting (XGBoost) machine learning approaches. Fourteen kings of essential molecular feature descriptors were screened from an initial roster of 244 descriptors through the application of a feature importance index and they showed a significant impact on the activity of AChE activity. The two models based solely on the 14 most critical molecular descriptors could maintain model's robustness and reliability. The correlation analysis between these 14 descriptors and the inhibition of AChE activity revealed the potential impact of the molecular characteristics on ILs toxicity. The results underscored the main influence of cations in ILs on the inhibitory activity towards the AChE enzyme. Specifically, cations exhibiting hydrophobicity properties were found to exert more potent inhibitory effects on the AChE enzyme. In addition, some other properties of the cations, such as the degree of branching, atomic weight and partial charge also modulated their inhibition potential. This study enhances the comprehension of the structure-activity relationship between ILs and AChE inhibition, providing a reference for designing safer and greener ILs.

A Comprehensive Review on Imperative Role of Ionic Liquids in Pharmaceutical Sciences

Ionic liquids (ILs) are poorly-coordinated ionic salts that can exist as a liquid at room temperatures (or <100 °C). ILs are also referred to as "designer solvents" because so many of them have been created to solve particular synthetic issues. ILs are regarded as "green solvents" because they have several distinctive qualities, including better ionic conduction, recyclability, improved solvation ability, low volatility, and thermal stability. These have been at the forefront of the most innovative fields of science and technology during the past few years. ILs may be employed in new drug formulation development and drug design in the field of pharmacy for various functions such as improvement of solubility, targeted drug delivery, stabilizer, permeability enhancer, or improvement of bioavailability in the development of pharmaceutical or vaccine dosage formulations. Ionic liquids have become a key component in various areas such as synthetic and catalytic chemistry, extraction, analytics, biotechnology, etc., due to their superior abilities along with highly modifiable potential. This study concentrates on the usage of ILs in various pharmaceutical applications enlisting their numerous purposes from the delivery of drugs to pharmaceutical synthesis. To better comprehend cuttingedge technologies in IL-based drug delivery systems, highly focused mechanistic studies regarding the synthesis/preparation of ILs and their biocompatibility along with the ecotoxicological and biological effects need to be studied. The use of IL techniques can address key issues regarding pharmaceutical preparations such as lower solubility and bioavailability which plays a key role in the lack of effectiveness of significant commercially available drugs.

1-Butyl-3-methylimidazolium tetrafluoroborate as suitable solvent for BF3: the case of alkyne hydration. Chemistry vs electrochemistry

In order to replace the expensive metal/ligand catalysts and classic toxic and volatile solvents, commonly used for the hydration of alkynes, the hydration reaction of alkynes was studied in the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMIm-BF4) adding boron trifluoride diethyl etherate (BF3·Et2O) as catalyst. Different ionic liquids were used, varying the cation or the anion, in order to identify the best one, in terms of both efficiency and reduced costs. The developed method was efficaciously applied to different alkynes, achieving the desired hydration products with good yields. The results obtained using a conventional approach (i.e., adding BF3·Et2O) were compared with those achieved using BF3 electrogenerated in BMIm-BF4, demonstrating the possibility of obtaining the products of alkyne hydration with analogous or improved yields, using less hazardous precursors to generate the reactive species in situ. In particular, for terminal arylalkynes, the electrochemical route proved to be advantageous, yielding preferentially the hydration products vs the aldol condensation products. Importantly, the ability to recycle the ionic liquid in subsequent reactions was successfully demonstrated.

Adsorptive Membranes Incorporating Ionic Liquids (ILs), Deep Eutectic Solvents (DESs) or Graphene Oxide (GO) for Metal Salts Extraction from Aqueous Feed

Water scarcity is a significant concern, particularly in arid regions, due to the rapid growth in population, industrialization, and climate change. Seawater desalination has emerged as a conventional and reliable solution for obtaining potable water. However, conventional membrane-based seawater desalination has drawbacks, such as high energy consumption resulting from a high-pressure requirement, as well as operational challenges like membrane fouling and high costs. To overcome these limitations, it is crucial to enhance the performance of membranes by increasing their efficiency, selectivity, and reducing energy consumption and footprint. Adsorptive membranes, which integrate adsorption and membrane technologies, offer a promising approach to address the drawbacks of standalone membranes. By incorporating specific materials into the membrane matrix, composite membranes have demonstrated improved permeability, selectivity, and reduced pressure requirements, all while maintaining effective pollutant rejection. Researchers have explored different adsorbents, including emerging materials such as ionic liquids (ILs), deep eutectic solvents (DESs), and graphene oxide (GO), for embedding into membranes and utilizing them in various applications. This paper aims to discuss the existing challenges in the desalination process and focus on how these materials can help overcome these challenges. It will also provide a comprehensive review of studies that have reported the successful incorporation of ILs, DESs, and GO into membranes to fabricate adsorptive membranes for desalination. Additionally, the paper will highlight both the current and anticipated challenges in this field, as well as present prospects, and provide recommendations for further advancements.

Relaxation Times of Ionic Liquids under Electrochemical Conditions Probed by Friction Force Microscopy

Ionic liquids (ILs) represent an important class of liquids considered for a broad range of applications such as lubrication, catalysis, or as electrolytes in batteries. It is well-known that in the case of charged surfaces, ILs form a pronounced layer structure that can be easily triggered by an externally applied electrode potential. Information about the time required to form a stable interface under varying electrode potentials is of utmost importance in many applications. For the first time, probing of relaxation times of ILs by friction force microscopy is demonstrated. The friction force is extremely sensitive to even subtle changes in the interfacial configuration of ILs. Various relaxation processes with different time scales are observed. A significant difference dependent on the direction of switching the applied potential, i.e., from a more cation-rich to a more anion-rich interface or vice versa, is found. Furthermore, variations in height immediately after the potential step and the presence of trace amounts of water are discussed as well.

Recent Developments in the Design and Fabrication of Electrochemical Biosensors Using Functional Materials and Molecules

Electrochemical biosensors are superior technologies that are used to detect or sense biologically and environmentally significant analytes in a laboratory environment, or even in the form of portable handheld or wearable electronics. Recently, imprinted and implantable biosensors are emerging as point-of-care devices, which monitor the target analytes in a continuous environment and alert the intended users to anomalies. The stability and performance of the developed biosensor depend on the nature and properties of the electrode material or the platform on which the biosensor is constructed. Therefore, the biosensor platform plays an integral role in the effectiveness of the developed biosensor. Enormous effort has been dedicated to the rational design of the electrode material and to fabrication strategies for improving the performance of developed biosensors. Every year, in the search for multifarious electrode materials, thousands of new biosensor platforms are reported. Moreover, in order to construct an effectual biosensor, the researcher should familiarize themself with the sensible strategies behind electrode fabrication. Thus, we intend to shed light on various strategies and methodologies utilized in the design and fabrication of electrochemical biosensors that facilitate sensitive and selective detection of significant analytes. Furthermore, this review highlights the advantages of various electrode materials and the correlation between immobilized biomolecules and modified surfaces.

Improved Lead Sensing Using a Solid-Contact Ion-Selective Electrode with Polymeric Membrane Modified with Carbon Nanofibers and Ionic Liquid Nanocomposite

A new solid-contact ion-selective electrode (ISE) sensitive to lead (II) ions, obtained by modifying a polymer membrane with a nanocomposite of carbon nanofibers and an ionic liquid 1-hexyl-3-methylimidazolium hexafluorophosphate, is presented. Electrodes with a different amount of nanocomposite in the membrane (0-9% w/w), in which a platinum wire or a glassy carbon electrode was used as an internal electrode, were tested. Potentiometric and electrochemical impedance spectroscopy measurements were carried out to determine the effect of the ion-sensitive membrane modification on the analytical and electrical parameters of the ion-selective electrode. It was found that the addition of the nanocomposite causes beneficial changes in the properties of the membrane, i.e., a decrease in resistance and an increase in capacitance and hydrophobicity. As a result, the electrodes with the modified membrane were characterized by a lower limit of detection, a wider measuring range and better selectivity compared to the unmodified electrode. Moreover, a significant improvement in the stability and reversibility of the electrode potential was observed, and additionally, they were resistant to changes in the redox potential of the sample. The best parameters were shown by the electrode obtained with the use of a platinum wire as the inner electrode with a membrane containing 6% of the nanocomposite. The electrode exhibited a Nernstian response to lead ions over a wide concentration range, 1.0 × 10^-8-1.0 × 10^-2 mol L^-1, with a slope of 31.5 mV/decade and detection limit of 6.0 × 10^-9 mol L^-1. In addition, the proposed sensor showed very good long term stability and worked properly 4 months after its preparation without essential changes in the E⁰ or slope values. It was used to analyze a real sample and correct results of lead content determination were obtained.

Tracing the Effect of Replacing [Gly]- with [Ala]- and Hydroxylation of [emim]+ on the Fine-Tuning of the Transport Properties of the Corresponding Amino Acid-Based Ionic Liquids Using MD Simulation

Natural amino acid-based ionic liquids (AAILs) composed of deprotonated amino acids, [AA]^-, as anions and hydroxylated imidazolium cations provide an eco-friendly nontoxic IL family with the growing number of chemical and biochemical revolutionary applications. In this paper, the transport properties of four AAILs composed of 1-(2-hydroxyethyl)-3-methylimidazolium ([HOemim]⁺) and 1-ethyl-3-methylimidazolium ([emim]⁺) cations with alaninate and glycinate anions were studied by molecular dynamics (MD) simulations. A nonpolarizable all-atom force field with the scaled charge (±0.8e) on each of the ions was applied and compared with the unit charge model in some cases. The tunable effects of the presence of the hydroxyl group in the side chain of the imidazolium cation, the type of amino acid anion, and the varied temperature on the dynamical behavior of AAILs were investigated in detail. The experimentally compatible trends of the simulated ionic self-diffusion coefficients, ionic conductivity, and ionicity were found to be inverse to the viscosity and ionic association of these ILs as [emim][Gly] > [emim][Ala] > [HOemim][Gly] > [HOemim][Ala]. The main reason behind these trends is the higher ability of the hydroxylated cation for the hydrogen-bond formation with [AA]^-. The mean square displacement (MSD), self-diffusion, and transference number of imidazolium cations are larger than those of [AA]^- anions, except in the case of [HOemim][Gly]. It was found that the activation energy for diffusion of [AA]^- is lower than that of [HOemim]⁺ but higher than that of [emim]⁺ in [HOemim][AA] and [emim][AA] ILs, respectively. The computed velocity autocorrelation function (VACF) showed that [Gly]^-, as the lightest ion, has the shortest mean collision time and velocity randomization time among the ions, especially in the [HOemim][Gly] IL. Replacing [emim]⁺ with [HOemim]⁺, similar to the effect of decreasing temperature, causes significant decreasing of the ionic self-diffusion and increasing of the well depth of the first minimum of the ionic VACFs. Current findings show that introducing suitable functional groups in the side chain of imidazolium cations can be a viable approach for efficient engineering design and fine-tuning of the transport properties of these AAILs.

Thermal and Electrochemical Properties of Ionic Liquids Bearing Allyl Group with Sulfonate-Based Anions-Application Potential in Epoxy Resin Curing Process

Sulfonate-based ionic liquids (ILs) with allyl-containing cations have been previously obtained by us, however, the present study aims to investigate the thermal, electrochemical and curing properties of these ILs. To determine the temperature range in which ionic liquid maintains a liquid state, thermal properties must be examined using Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA). Melting, cold crystallization and glass transition temperatures are discussed, as well as decomposition temperatures for imidazolium- and pyridinium-based ionic liquids. The conductivity and electrochemical stability ranges were studied in order to investigate their potential applicability as electrolytes. Finally, the potential of triflate-based ILs as polymerization initiators for epoxy resins was proven.

Advanced Formulations Based on Poly(ionic liquid) Materials for Additive Manufacturing

Innovation in materials specially formulated for additive manufacturing is of great interest and can generate new opportunities for designing cost-effective smart materials for next-generation devices and engineering applications. Nevertheless, advanced molecular and nanostructured systems are frequently not possible to integrate into 3D printable materials, thus limiting their technological transferability. In some cases, this challenge can be overcome using polymeric macromolecules of ionic nature, such as polymeric ionic liquids (PILs). Due to their tuneability, wide variety in molecular composition, and macromolecular architecture, they show a remarkable ability to stabilize molecular and nanostructured materials. The technology resulting from 3D-printable PIL-based formulations represents an untapped array of potential applications, including optoelectronic, antimicrobial, catalysis, photoactive, conductive, and redox applications.

Effects of the Structure of Benzenesulfonate-Based Draw Solutes on the Forward Osmosis Process

A series of phosphonium-based ionic liquids (ILs) based on benzenesulfonate derivatives (tetrabutylphosphonium benzenesulfonate ([TBP][BS]), tetrabutylphosphonium 4-methylbenzenesulfonate ([TBP][MBS]), tetrabutylphosphonium 2,4-dimethylbenzenesulfonate ([TBP][DMBS]), and tetrabutylphosphonium 2,4,6-trimethylbenzenesulfonate ([TBP][TMBS])) were synthesized via anion exchange with tetrabutylphosphonium bromide ([TBP][Br]). Then, we characterized the ILs and investigated their suitability as draw solutes for forward osmosis (FO), focusing on their thermoresponsive properties, conductivities, and osmotic pressures. We found that aqueous [TBP][BS] was not thermoresponsive, but 20 wt% aqueous [TBP][MBS], [TBP][DMBS], and [TBP][TMBS] had lower critical solution temperatures (LCSTs) of approximately 41, 25, and 21 °C, respectively, enabling their easy recovery using waste heat. Based on these findings, 20 wt% aqueous [TBP][DMBS] was tested for its FO performance, and the water and reverse solute fluxes were found to be approximately 9.29 LMH and 1.37 gMH, respectively, in the active layer facing the draw solution (AL-DS) mode and 4.64 LMH and 0.37 gMH, respectively, in the active layer facing the feed solution (AL-FS) mode. Thus, these tetrabutylphosphonium benzenesulfonate-based LCST-type ILs are suitable for drawing solutes for FO process.

Nucleation, Coalescence, and Thin-Film Growth of Triflate-Based Ionic Liquids on ITO, Ag, and Au Surfaces

This study investigates the nucleation and growth of micro-/nanodroplets of triflate-based ionic liquids (ILs) fabricated by vapor deposition on different surfaces: indium tin oxide (ITO); silver (Ag); gold (Au). The ILs studied are constituted by the alkylimidazolium cation and the triflate anion—[CnC1im][OTF] series. One of the key issues that determine the potential applications of ILs is the wettability of surfaces. Herein, the wetting behavior was evaluated by changing the cation alkyl chain length (C2 to C10). A reproducible control of the deposition rate was conducted employing Knudsen cells, and the thin-film morphology was evaluated by high-resolution scanning electron microscopy (SEM). The study reported here for the [CnC1im][OTF] series agrees with recent data for the [CnC1im][NTf2] congeners, highlighting the higher wettability of the solid substrates to long-chain alkylimidazolium cations. Compared to [NTf2], the [OTF] series evidenced an even more pronounced wetting ability on Au and coalescence processes of droplets highly intense on ITO. Higher homogeneity and film cohesion were found for cationic groups associated with larger alkyl side chains. An island growth was observed on both Ag and ITO substrates independently of the cation alkyl chain length. The Ag surface promoted the formation of smaller-size droplets. A quantitative analysis of the number of microdroplets formed on Ag and ITO revealed a trend shift around [C6C1im][OTF], emphasizing the effect of the nanostructuration intensification due to the formation of nonpolar continuous domains.

Proton-Conducting Biopolymer Electrolytes Based on Carboxymethyl Cellulose Doped with Ammonium Formate

In this work, CMC-AFT biopolymer electrolytes system was developed using Carboxymethyl cellulose (CMC) doped with varied amount (10-50 wt.%) of ammonium formate (AFT) in order to study the effect of AFT on the biopolymer-salt system. The chemical structure of the biopolymer was studied using Fourier-Transform infrared (FTIR) and X-ray diffraction (XRD). The interaction between the COO^- of CMC and the weakly-bound H⁺ of NH₄⁺ AFT occurred at 1573 cm^-1 as seen in FTIR analysis and the amorphous phase was found to increase with the addition of AFT as seen from XRD pattern. Both FTIR and XRD testing indicates that the AFT had disrupted the CMC crystalline structure. The ionic conductivity of the CMC-AFT biopolymer electrolytes increases and achieved the highest value of 1.47 × 10^-4 S·cm^-1 with the addition of AFT. The impedance measurement showed that the capacitive and resistive behavior inside the biopolymer diminished when 50 wt.% of AFT was added. Dielectric analysis confirmed the increased number of charge carriers is due to the increase in AFT composition. Further dielectric analysis showed the occurrence of conductivity relaxation peak thus affirmed the charge carriers' ability to travel further to a longer distances when AFT composition increases from 10 to 50 wt.%. The dielectric properties confirmed the non-Debye behavior of the CMC-AFT biopolymer electrolytes.

Application of electrochemical sensors based on nanomaterials modifiers in the determination of antipsychotics

At present, the content of antipsychotics in samples is always analyzed by traditional detection methods, including mass spectrometry (MS), spectrophotometry, fluorescence, capillary electrophoresis (CE). However, conventional methods are cumbersome and complex, require a large sample volume, many pre-processing steps, long analysis cycles, expensive instruments, and need well-trained detection capabilities personnel. In addition, patients with schizophrenia require frequent and painful blood collection procedures, which adds additional treatment costs and time burdens. In view of these factors, electrochemical methods have become the most promising candidate technology for timely analysis due to their low cost, simple operation, excellent sensitivity and specificity. As we all know, nanomaterials play an extremely important role in electrochemical sensing applications. As the sensor modifiers, nanomaterials enable electrochemical analysis to overcome the time-consuming and labor-intensive shortcomings of traditional detection methods, and greatly reduce the research cost. Nanomaterials modified electrodes can be used as sensors to determine the concentration of antipsychotics in organisms quickly and accurately, which is a bright spot in the application of nanomaterials. The combination of different nanomaterials can even form a nanocomposite with a synergistic effect. This paper firstly reviews the application of nanomaterials-modified sensors on the basis of research in the past ten years, reviews the use of nanomaterial-modified sensors to quickly and accurately determine the concentration of antipsychotics in biological samples, and demonstrates a new idea of using nanomaterials sensors for drug monitoring and determination. At the end of this review, a brief overview is given of the limitations and the future prospects of nanomaterial sensors for the determination of antipsychotics concentrations.

Synthesis, Physical Properties and Electrochemical Applications of Two Ionic Liquids Containing the Asymmetric (Fluoromethylsulfonyl)(Trifluoromethylsulfonyl)imide Anion

Novel ionic liquid (IL) electrolytes based on the asymmetric (fluoromethylsulfonyl)(trifluoromethylsulfonyl)imide (FTFSI)− anion, combined with the N-trimethyl-N-butyl-ammonium (N1114)+ and N,N-diethyl-N-methyl-N(2-methoxyethyl)-ammonium (N122(2O1))+ cations, were successfully synthesized and investigated in terms of thermal, vibrational and electrochemical properties. Thermogravimetric measurements revealed that the ionic liquids are stable up to 300 °C (2% mass loss). Differential scanning calorimetry measurements evidenced no phase transition down to −90 °C, suggesting a transition towards a glass state at lower temperatures. Infrared spectroscopy measurements, for the first time performed on ILs containing FTFSI, could not detect any crystallization down to −140 °C. The frequency of the main absorption bands of the ILs are in good agreement with DFT calculations. The FTFSI ionic liquid electrolytes, containing 20% mol of LiTFSI, show no solid-liquid phase transition due to the asymmetry of the FTFSI− anion, increasing the −10 °C conductivity up to 10−4 S cm−1. These interesting ion transport properties remarkably extend the operative temperature range down to low temperatures. The FTFSI electrolytes exhibit remarkable electrochemical stability up to 4.8 V, this making them appealing for realizing safer and highly reliable lithium battery systems operating at high voltages.

Sodium-Conducting Ionic Liquid Electrolytes: Electrochemical Stability Investigation

Sodium-conducting electrolytes, based on the EMIFSI, EMITFSI, N1114FSI, N1114TFSI, N1114IM14, PIP13TFSI and PIP14TFSI ionic liquids, were investigated in terms of electrochemical stability through voltammetry techniques with the aim of evaluating their feasibility in Na-ion devices. Both the anodic and cathodic sides were studied. The effect of contaminants, such as water and/or molecular oxygen, on the electrochemical robustness of the electrolytes was also investigated. Preliminary cyclic voltammetry and charge-discharge tests were carried out in Na/hard carbon and Na/α-NaMnO2 half cells using selected ionic liquid electrolytes. The results are presented and discussed in the present paper.

Machine-Learning Model Prediction of Ionic Liquids Melting Points

Ionic liquids (ILs) have great potential for application in energy storage and conversion devices. They have been identified as promising electrolytes candidates in various battery systems. However, the practical application of many ionic liquids remains limited due to the unfavorable melting points (Tm) which constrain the operating temperatures of the batteries and exhibit unfavorable transport property. To fine tune the Tm of ILs, a systematic study and accurate prediction of Tm of ILs is highly desirable. However, the Tm of an IL can change considerably depending on the molecular structures of the anion and cation and their combination. Thus, a fine control in Tm of ILs can be challenging. In this study, we employed a deep-learning model to predict the Tm of various ILs that consist of different cation and anion classes. Based on this model, a prediction of the melting point of ILs can be made with a reasonably high accuracy, achieving an R2 score of 0.90 with RMSE of ~32 K, and the Tm of ILs are mostly dictated by some important molecular descriptors, which can be used as a set of useful design rules to fine tune the Tm of ILs.

Electrode Kinetics of Ion Jelly and Ion Sol-Gel Redox Materials on Screen-Printed Electrodes

Several hydrogel materials have been proposed for drug delivery systems and other purposes as interfacial materials, such as components for fuel cells and immobilization of biomolecules. In the present work, two materials, an ion sol-gel, based on 1-octyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, and an ion jelly (1-ethyl-3-methylimidazolium ethylsulfate) film deposited on carbon screen-printed electrodes, were electrochemically characterized. The electrode kinetics of ion jelly and ion sol-gel materials were compared by using ferrocyanide/ferricyanide redox reaction couple as a model redox process. Diffusion coefficients were calculated and compared to those obtained with the model redox couple in non-modified electrodes. Results pointed to a decrease of two and four orders of magnitude in the diffusion coefficients, respectively, for ion jelly and ion sol-gel film modified electrodes. Heterogeneous electron transfer constants for the ferrocyanide/ferricyanide ion redox process were also determined for modified and non-modified electrodes, in which the ion sol-gel film modified electrode presented the lower values. This work sought to contribute to the understanding of these materials’ properties, with emphasis on their diffusion, conductivity, and electrochemical behavior, namely reversibility, transfer coefficients, and kinetics, and optimize the most suitable properties for different possible applications, such as drug delivery.

A Differentiable Neural-Network Force Field for Ionic Liquids

We present NeuralIL, a model for the potential energy of an ionic liquid that accurately reproduces first-principles results with orders-of-magnitude savings in computational cost. Built on the basis of a multilayer perceptron and spherical Bessel descriptors of the atomic environments, NeuralIL is implemented in such a way as to be fully automatically differentiable. It can thus be trained on ab initio forces instead of just energies, to make the most out of the available data, and can efficiently predict arbitrary derivatives of the potential energy. Using ethylammonium nitrate as the test system, we obtain out-of-sample accuracies better than 2 meV atom-1 (<0.05 kcal mol-1) in the energies and 70 meV Å-1 in the forces. We show that encoding the element-specific density in the spherical Bessel descriptors is key to achieving this. Harnessing the information provided by the forces drastically reduces the amount of atomic configurations required to train a neural network force field based on atom-centered descriptors. We choose the Swish-1 activation function and discuss the role of this choice in keeping the neural network differentiable. Furthermore, the possibility of training on small data sets allows for an ensemble-learning approach to the detection of extrapolation. Finally, we find that a separate treatment of long-range interactions is not required to achieve a high-quality representation of the potential energy surface of these dense ionic systems.

Imidazolium Triflate Ionic Liquids' Capacitance-Potential Relationships and Transport Properties Affected by Cation Chain Lengths

In this paper we report the effects of five imidazolium cations with varying alkyl chain lengths to study the effects of cation size on capacitance versus voltage behavior. The cations include ethyl-, butyl-, hexyl-, octyl-, and decyl-3-methylimidazolium, all paired with a triflate anion. We analyze the capacitance with respect to the cation alkyl chain length qualitatively and quantitatively by analyzing changes in the capacitance-potential curvature shape and magnitude across several standard scanning protocols and electrochemical techniques. Further, three transport properties (viscosity, diffusion coefficient, and electrical conductivity) are experimentally determined and integrated into the outcomes. Ultimately, we find higher viscosities, lower diffusion coefficients, and lower electrical conductivities when the alkyl chain length is increased. Also, capacitance values increase with cation size, except 1-octyl-3-methylimidazolium, which does not follow an otherwise linear trend. This capacitive increase is most pronounced when sweeping the potential in the cathodic direction. These findings challenge the conventional hypothesis that increasing the length of the alkyl chain of imidazolium cations diminishes the capacitance and ionic liquid performance in charge storage.

MAS-NMR of [Pyr13][Tf2N] and [Pyr16][Tf2N] Ionic Liquids Confined to Carbon Black: Insights and Pitfalls

Electrolytes based on ionic liquids (IL) are promising candidates to replace traditional liquid electrolytes in electrochemical systems, particularly in combination with carbon-based porous electrodes. Insight into the dynamics of such systems is imperative for tailoring electrochemical performance. In this work, 1-Methyl-1-propylpyrrolidinium bis(trifluoromethylsulfonyl)imide and 1-Hexyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide were studied in a carbon black (CB) host using spectrally resolved Carr-Purcell-Meiboom-Gill (CPMG) and 13-interval Pulsed Field Gradient Stimulated Echo (PFGSTE) Magic Angle Spinning Nuclear Magnetic Resonance (MAS-NMR). Data were processed using a sensitivity weighted Laplace inversion algorithm without non-negativity constraint. Previously found relations between the alkyl length and the aggregation behavior of pyrrolidinium-based cations were confirmed and characterized in more detail. For the IL in CB, a different aggregation behavior was found compared to the neat IL, adding the surface of a porous electrode as an additional parameter for the optimization of IL-based electrolytes. Finally, the suitability of MAS was assessed and critically discussed for investigations of this class of samples.

Functional Ionic Liquids Decorated Carbon Hybrid Nanomaterials for the Electrochemical Biosensors

Ionic liquids are gaining high attention due to their extremely unique physiochemical properties and are being utilized in numerous applications in the field of electrochemistry and bio-nanotechnology. The excellent ionic conductivity and the wide electrochemical window open a new avenue in the construction of electrochemical devices. On the other hand, carbon nanomaterials, such as graphene (GR), graphene oxide (GO), carbon dots (CDs), and carbon nanotubes (CNTs), are highly utilized in electrochemical applications. Since they have a large surface area, high conductivity, stability, and functionality, they are promising in biosensor applications. Nevertheless, the combination of ionic liquids (ILs) and carbon nanomaterials (CNMs) results in the functional ILs-CNMs hybrid nanocomposites with considerably improved surface chemistry and electrochemical properties. Moreover, the high functionality and biocompatibility of ILs favor the high loading of biomolecules on the electrode surface. They extremely enhance the sensitivity of the biosensor that reaches the ability of ultra-low detection limit. This review aims to provide the studies of the synthesis, properties, and bonding of functional ILs-CNMs. Further, their electrochemical sensors and biosensor applications for the detection of numerous analytes are also discussed.

Ionic-Liquid-Catalyzed Approaches under Metal-Free Conditions

ConspectusMetal-free catalysis is a promising protocol to access chemicals without metal contamination. Ionic liquids (ILs) that are entirely composed of organic cations and inorganic/organic anions have emerged as promising alternatives to molecular solvents and metal catalysts due to their unique properties such as structural tunability, the coexistence of multiple interactions among ions (e.g., electrostatic interaction, hydrogen bonding, van de Waals forces, acid/base interactions, hydrophilic/hydrophobic interactions, etc.), unique affinity for a wide range of chemicals, good chemical and thermal stability, and quite low volatility. ILs have shown potential applications in various chemical processes.In this Account, we systematically described our most recent work on IL-catalyzed approaches under metal-free conditions. The first section presents the IL-catalyzed strategies toward the transformation of CO2 to value-added chemicals, focusing on the CO2-reactive IL-catalyzed CO2 transformation to various heterocycles and the IL-catalyzed reductive transformation of CO2 to chemicals. In these approaches, we designed task-specific ILs that are able to chemically capture and activate CO2 via forming anion-based carbonate/carbamate or cation-based carboxylate/carbamate intermediates, thus further accomplishing its transformation to a series of heterocycles including quinazoline-2,4(1H,3H)-diones, cyclic carbonates, 2-oxazolidinones, oxazolones, and benzimidazolones under metal-free conditions. For the IL-catalyzed approaches to reducing CO2 with hydrosilanes to chemicals, we employed ILs capable of activating the Si-H bond in hydrosilanes and the N-H bond in amine substrates via H-bonding, thus achieving the reductive transformation of CO2 to formamides, benzimidazoles, and benzothiazoles via cooperative catalysis. The second section describes our finding on the IL-catalyzed hydration of the C≡C bond in propargylic alcohols. Azolate anion-based ILs that can chemically capture CO2 via the formation of carbamates could serve as robust nucleophiles to attack the C≡C bond in propargylic alcohols and then efficiently catalyze the hydration of propargylic alcohols to produce α-hydroxy ketones with the assistance of atmospheric CO2 gas under metal-free conditions. The third section unveils the cooperative catalysis strategy of hydrogen bond donors and acceptors of ILs for chemical reactions. In the hydrogen-bonding catalysis protocols, cations of the ILs act as H-bond donors and anions, as acceptors, forming H-bonds with the reactant molecules, respectively, in opposite ways, which can cooperatively catalyze the ring-closing C-O/C-O bond metathesis reactions of aliphatic diethers to O-heterocycles, the dehydrative etherification of alcohols to ethers, and direct oxidative esterification of alcohols to esters. We believe that these IL-catalyzed metal-free processes and strategies display promising practical applications, and their commercialization would bring great benefits to the production of the as-afforded value-added chemicals.

Advantages of Electrochemical Polishing of Metals and Alloys in Ionic Liquids

Electropolishing of metal surfaces is a benign alternative to mechanical treatment. Ionic liquids are considered as green electrolytes for the electropolishing of metals. They demonstrate a number of advantages in comparison with acid aqueous solutions and other methods of producing smooth or mirror-like surfaces that are required by diverse applications (medical instruments, special equipment, implants and prostheses, etc.). A wide window of electrochemical stability, recyclability, stability and tunability are just a few benefits provided by ionic liquids in the title application. An overview of the literature data on electropolishing of such metals as Ti, Ni, Pt, Cu, Al, U, Sn, Ag, Nb, stainless steel and other alloys in ionic liquids is presented.