Poly(lactic acid)/Poly(3-hydroxybutyrate) Biocomposites with Differently Treated Cellulose Fibers

In vitro degradation and antibacterial activity of bacterial cellulose deposited flax fabric reinforced with polylactic acid and polyhydroxybutyrate

The objective of this study was to prepare biocomposites through the solution casting method followed by compression moulding in which bacterial cellulose (BC) deposited flax fabric (FF) produced through fermentation is coated with minimal amount of polylactic acid (PLA) and polyhydroxybutyrate (PHB). Biocomposites incorporated with 60 % of PLA or PHB (% w/w) show enhanced tensile strength. Cross-sectional morphology showed good superficial interaction of these biopolymers with fibres of FF thereby filling up the gaps present between the fibres. The tensile strength of biocomposites at 60 % PLA and 60 % PHB improved from 37.97 MPa (i.e., BC deposited FF produced in presence of honey) to 67.17 MPa and 56.26 MPa, respectively. Further, 0.25 % of nalidixic acid (NA) (% w/w) and 6 % of oleic acid (OA) (% w/w) incorporation into the biocomposites imparted prolonged antibacterial activity against Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa. The in vitro cytotoxicity of biocomposites was determined using L929 mouse fibroblast cells. The 3-(4,5-cime- thylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide cytotoxicity tests showed that the PHB derived biocomposites along with antibacterial compounds in it were non-toxic. In vitro degradation of biocomposites was measured for up to 8 weeks in the mimicked physiological environment that showed a gradual rate of degradation over the period.

Recent advances in flame retardant and mechanical properties of polylactic acid: A review

The large-scale application of ecofriendly polymeric materials has become a key focus of scientific research with the trend toward sustainable development. Mechanical properties and fire safety are two critical considerations of biopolymers for large-scale applications. Polylactic acid (PLA) is a flammable, melt-drop carrying, and strong but brittle polymer. Hence, it is essential to achieve both flame retardancy and mechanical enhancement to improve safety and broaden its application. This study reviews the recent research on the flame retardant functionalization and mechanical reinforcement of PLA. It classifies PLA according to the type of the flame retardant strategy employed, such as surface-modified fibers, modified nano/micro fillers, small-molecule and macromolecular flame retardants, flame retardants with fibers or polymers, and chain extension or crosslinking with other flame retardants. The functionalization strategies and main parameters of the modified PLA systems are summarized and analyzed. This study summarizes the latest advances in the fields of flame retardancy and mechanical reinforcement of PLA.

Biological and Oxidative Degradation of Ultrathin-Fibrous Nonwovens Based on Poly(lactic Acid)/Poly(3-Hydroxybutyrate) Blends

Developing biodegradable materials based on polymer blends with a programmable self-destruction period in the environmental conditions of living systems is a promising direction in polymer chemistry. In this work, novel non-woven fibrous materials obtained by electrospinning based on the blends of poly(lactic acid) (PLA) and poly(3-hydroxybutyrate) (PHB) were developed. The kinetics of biodegradation was studied in the aquatic environment of the inoculum of soil microorganisms. Oxidative degradation was studied under the ozone gaseous medium. The changes in chemical composition and structure of the materials were studied by optical microscopy, DSC, TGA, and FTIR-spectroscopy. The disappearance of the structural bands of PHB in the IR-spectra of the blends and a significant decrease in the enthalpy of melting after 90 days of exposure in the inoculum indicated the biodegradation of PHB while PLA remained stable. It was shown that the rate of ozonation was higher for PLA and the blends with a high content of PLA. The lower density of the amorphous regions of the blends determined an increased rate of their oxidation by ozone compared to homopolymers. The optimal composition in terms of degradation kinetics is a fibrous material based on the blend of 30PLA/70PHB that can be used as an effective ecosorbent, for biopackaging, and as a highly porous covering material for agricultural purposes.

Optimal Design of Wood/Rice Husk-Waste-Filled PLA Biocomposites Using Integrated CRITIC–MABAC-Based Decision-Making Algorithm

Based on the criteria importance through inter-criteria correlation (CRITIC) and the multi-attributive border approximation area comparison (MABAC), a decision-making algorithm was developed to select the optimal biocomposite material according to several conflicting attributes. Poly(lactic acid) (PLA)-based binary biocomposites containing wood waste and ternary biocomposites containing wood waste/rice husk with an overall additive content of 0, 2.5, 5, 7.5 and 10 wt.% were manufactured and evaluated for physicomechanical and wear properties. For the algorithm, the following performance attributes were considered through testing: the evaluated physical (density, water absorption), mechanical (tensile, flexural, compressive and impact) and sliding wear properties. The water absorption and strength properties were found to be the highest for unfilled PLA, while modulus performance remained the highest for 10 wt.% rice husk/wood-waste-added PLA biocomposites. The density of PLA biocomposites increased as rice husk increased, while it decreased as wood waste increased. The lowest and highest density values were recorded for 10 wt.% wood waste and rice husk/wood-waste-containing PLA biocomposites, respectively. The lowest wear was exhibited by the 5 wt.% rice husk/wood-waste-loaded PLA biocomposite. The experimental results were composition dependent and devoid of any discernible trend. Consequently, prioritizing the performance of PLA biocomposites to choose the best one among a collection of alternatives became challenging. Therefore, a decision-making algorithm, called CRITIC–MABAC, was used to select the optimal composition. The importance of attributes was determined by assigning weight using the CRITIC method, while the MABAC method was employed to assess the complete ranking of the biocomposites. The results achieved from the hybrid CRITIC–MABAC approach demonstrated that the 7.5 wt.% wood-waste-added PLA biocomposite exhibited the optimal physicomechanical and wear properties.

Poly(3-hydroxybutyrate) Nanocomposites with Cellulose Nanocrystals

Poly(3-hydroxybutyrate) (PHB) is one of the most promising substitutes for the petroleum-based polymers used in the packaging and biomedical fields due to its biodegradability, biocompatibility, good stiffness, and strength, along with its good gas-barrier properties. One route to overcome some of the PHB’s weaknesses, such as its slow crystallization, brittleness, modest thermal stability, and low melt strength is the addition of cellulose nanocrystals (CNCs) and the production of PHB/CNCs nanocomposites. Choosing the adequate processing technology for the fabrication of the PHB/CNCs nanocomposites and a suitable surface treatment for the CNCs are key factors in obtaining a good interfacial adhesion, superior thermal stability, and mechanical performances for the resulting nanocomposites. The information provided in this review related to the preparation routes, thermal, mechanical, and barrier properties of the PHB/CNCs nanocomposites may represent a starting point in finding new strategies to reduce the manufacturing costs or to design better technological solutions for the production of these materials at industrial scale. It is outlined in this review that the use of low-value biomass resources in the obtaining of both PHB and CNCs might be a safe track for a circular and bio-based economy. Undoubtedly, the PHB/CNCs nanocomposites will be an important part of a greener future in terms of successful replacement of the conventional plastic materials in many engineering and biomedical applications.