Amino-Functionalized Titanium Based Metal-Organic Framework for Photocatalytic Hydrogen Production

Trace Iron-Doped Nickel-Cobalt selenide with rich heterointerfaces for efficient overall water splitting at high current densities

Developing bifunctional electrocatalysts based on non-precious metals for overall water splitting, while maintaining high catalytic activity and stability under high current densities, remains challenging. Herein, we successfully constructred trace iron-doped nickel-cobalt selenide with abundant CoSe2 (210)-Ni3Se4 (202) heterointerfaces via a simple one-step selenization reaction. The synthesized Fe-NiCoSex/NCFF (NCFF stands for nickel-cobalt-iron foam) exhibits outstanding hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activity with low overpotentials of 328 mV for HER and 345 mV for OER at a high current density of 1000 mA cm-2, while maintaining stability for over 20 h. Additionally, the Fe-NiCoSex/NCFF exhibits the lowest Tafel slope values for both HER (33.7 mV dec-1) and OER (55.92 mV dec-1), indicating the fastest kinetics on its surface. The Fe-NiCoSex/NCFF features uniformly distributed micrometer-sized selenide particles with dense nanowires on their surface, providing a large reactive surface area and abundant active sites. Moreover, X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) analyses reveal that the catalyst is composed of nickel, cobalt, and iron, forming micrometer-sized particles with both crystalline and amorphous phases, thereby enhancing HER and OER performance under high current density. Density functional theory (DFT) calculations demonstrate that the heterostructure CoSe2 (210)-Ni3Se4 (202), with high electron density and suitable adsorption capacity for reaction intermediates, and low energy barriers for HER (-0.384 eV) and OER (ΔG1st: 0.243 eV, ΔG2nd: 0.376 eV), serves as an active center for both HER and OER.

Ti-based MOFs with acetic acid pendings as an efficient catalyst in the preparation of new spiropyrans with biological moieties

The strategy of designing heterogeneous porous catalysts by a post-modification method is a smart strategy to increase the catalytic power of desired catalysts. Accordingly, in this report, metal-organic frameworks based on titanium with acetic acid pending were designed and synthesized via post-modification method. The structure of the target catalyst has been investigated using different techniques such as FT-IR, XRD, SEM, EDX, Mapping, and N2 adsorption/desorption (BET/the BJH) the correctness of its formation has been proven. The catalytic application of Ti-based MOFs functionalized with acetic acid was evaluated in the preparation of new spiropyrans, and the obtained results show that the catalytic performance is improved by this modification. The strategy of designing heterogeneous porous catalysts through post-modification methods presents a sophisticated approach to enhancing the catalytic efficacy of desired catalysts. In this context, our study focuses on the synthesis and characterization of metal-organic frameworks (MOFs) based on titanium, functionalized with acetic acid pendants, using a post-modification method. Various characterization techniques, including Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), mapping, and N2 adsorption/desorption (BET/BJH), were employed to investigate the structure and composition of the synthesized catalyst. These techniques collectively confirmed the successful formation and structural integrity of the target catalyst. The structure of the synthesized products was confirmed by melting point, 1H-NMR and 13C-NMR and FT-IR techniques. Examining the general process of catalyst synthesis and its catalytic application shows that the mentioned modification is very useful for catalytic purposes. The presented catalyst was used in synthesis of a wide range of biologically active spiropyrans with good yields. The simultaneous presence of several biologically active cores in the synthesized products will highlight the biological properties of these compounds. The present study offers a promising insight into the rational design, synthesis, and application of task-specific porous catalysts, particularly in the context of synthesizing biologically active candidate molecules.

Functionalized Linear Conjugated Polymer/TiO2 Heterojunctions for Significantly Enhancing Photocatalytic H2 Evolution

Conjugated polymers (CPs) have attracted much attention in recent years due to their structural abundance and tunable energy bands. Compared with CP-based materials, the inorganic semiconductor TiO2 has the advantages of low cost, non-toxicity and high photocatalytic hydrogen production (PHP) performance. However, studies on polymeric-inorganic heterojunctions, composed of D-A type CPs and TiO2, for boosting the PHP efficiency are still rare. Herein, an elucidation that the photocatalytic hydrogen evolution activity can actually be improved by forming polymeric-inorganic heterojunctions TFl@TiO2, TS@TiO2 and TSO2@TiO2, facilely synthesized through efficient in situ direct C-H arylation polymerization, is given. The compatible energy levels between virgin TiO2 and polymeric semiconductors enable the resulting functionalized CP@TiO2 heterojunctions to exhibit a considerable photocatalytic hydrogen evolution rate (HER). Especially, the HER of TSO2@TiO2 heterojunction reaches up to 11,220 μmol g-1 h-1, approximately 5.47 and 1260 times higher than that of pristine TSO2 and TiO2 photocatalysts. The intrinsic merits of a donor-acceptor conjugated polymer and the interfacial interaction between CP and TiO2 account for the excellent PHP activity, facilitating the separation of photo-generated excitons. Considering the outstanding PHP behavior, our work discloses that the coupling of inorganic semiconductors and suitable D-A conjugated CPs would play significant roles in the photocatalysis community.

Achieving Highly Efficient Photocatalytic Hydrogen Evolution through the Construction of g-C3N4@PdS@Pt Nanocomposites

Selective supported catalysts have emerged as a promising approach to enhance carrier separation, particularly in the realm of photocatalytic hydrogen production. Herein, a pioneering exploration involves the loading of PdS and Pt catalyst onto g-C3N4 nanosheets to construct g-C3N4@PdS@Pt nanocomposites. The photocatalytic activity of nanocomposites was evaluated under visible light and full spectrum irradiation. The results show that g-C3N4@PdS@Pt nanocomposites exhibit excellent properties. Under visible light irradiation, these nanocomposites exhibit a remarkable production rate of 1289 μmol·g-1·h-1, marking a staggering 60-fold increase compared to g-C3N4@Pt (20.9 μmol·g-1·h-1). Furthermore, when subjected to full spectrum irradiation, the hydrogen production efficiency of g-C3N4@PdS@Pt-3 nanocomposites reaches an impressive 11,438 μmol·g-1·h-1, representing an eightfold enhancement compared to g-C3N4@Pt (1452 μmol·g-1·h-1) under identical conditions. Detailed investigations into the microstructure and optical properties of g-C3N4@PdS catalysts were conducted, shedding light on the mechanisms governing photocatalytic hydrogen production. This study offers valuable insights into the potential of these nanocomposites and their pivotal role in advancing photocatalysis.

Rational Photodeposition of Cobalt Phosphate on Flower-like ZnIn2S4 for Efficient Photocatalytic Hydrogen Evolution

The high electrons and holes recombination rate of ZnIn2S4 significantly limits its photocatalytic performance. Herein, a simple in situ photodeposition strategy is adopted to introduce the cocatalyst cobalt phosphate (Co-Pi) on ZnIn2S4, aiming at facilitating the separation of electron-hole by promoting the transfer of photogenerated holes of ZnIn2S4. The study reveals that the composite catalyst has superior photocatalytic performance than blank ZnIn2S4. In particular, ZnIn2S4 loaded with 5% Co-Pi (ZnIn2S4/5%Co-Pi) has the best photocatalytic activity, and the H2 production rate reaches 3593 μmol·g-1·h-1, approximately double that of ZnIn2S4 alone. Subsequent characterization data demonstrate that the introduction of the cocatalyst Co-Pi facilitates the transfer of ZnIn2S4 holes, thus improving the efficiency of photogenerated carrier separation. This investigation focuses on the rational utilization of high-content and rich cocatalysts on earth to design low-cost and efficient composite catalysts to achieve sustainable photocatalytic hydrogen evolution.

HER catalytic activity and regulation of a transition metal atom-anchored BC3 monolayer: a first-principles study

An atomic-level understanding of the hydrogen evolution reaction (HER) on a transition metal (TM) atom-anchored 2D monolayer is vital to explore highly efficient catalysts for hydrogen production. Here, the catalytic activities and modulation of TM atom (Ti, Fe, Cu, Zn, Mo, Ag, Au)-doped BC3 monolayers are investigated by first-principles calculations. Au@BC3 and Fe@BC3 are proven to be potentially excellent HER catalysts. Partial oxidation engineering on Zn@BC3 could improve its performance. Au@BC3 and Ti, Cu and Mo-anchored BC3 with the support of a NbB2 (0001) surface are expected to replace Pt due to the Gibbs free energy changes extremely close to zero. It is revealed that the catalytic activity of the adsorption site is highly related to the degree of charge transfer between the adsorption site and substrate.

In Situ Encapsulation of Graphene Quantum Dots in Highly Stable Porphyrin Metal-Organic Frameworks for Efficient Photocatalytic CO2 Reduction

Photocatalytic CO₂ reduction to valuable hydrocarbon solar fuel is of great significance but still challenging. Strong CO₂ enrichment ability and easily adjustable structures make metal-organic frameworks (MOFs) potential photocatalysts for CO₂ conversion. Even though pure MOFs have the potential for photoreduction of CO₂, the efficiency is still quite low due to rapid photogenerated electron-hole recombination and other drawbacks. In this work, graphene quantum dots (GQDs) were in situ encapsulated into highly stable MOFs via a solvothermal method for this challenging task. The GQDs@PCN-222 with encapsulated GQDs showed similar Powder X-ray Diffraction (PXRD) patterns to PCN-222, indicating the retained structure. The porous structure was also retained with a Brunauer-Emmett-Teller (BET) surface area of 2066 m²/g. After incorporation of GQDs, the shape of GQDs@PCN-222 particles remained, as revealed by the scanning electron microscope (SEM). As most of the GQDs were covered by thick PCN-222, it was hard to observe those GQDs using a transmission electron microscope (TEM) and a high-resolution transmission electron microscope (HRTEM) directly, the treatment of digested GQDs@PCN-222 particles by immersion in a 1 mM aqueous KOH solution can make the incorporated GQDs visible in TEM and HRTEM. The linker, deep purple porphyrins, make MOFs a highly visible light harvester up to 800 nm. The introduction of GQDs inside PCN-222 can effectively promote the spatial separation of the photogenerated electron-hole pairs during the photocatalytic process, which was proved by the transient photocurrent plot and photoluminescence emission spectra. Compared with pure PCN-222, the obtained GQDs@PCN-222 displayed dramatically enhanced CO production derived from CO₂ photoreduction with 147.8 μmol/g/h in a 10 h period under visible light irradiation with triethanolamine (TEOA) as a sacrificial agent. This study demonstrated that the combination of GQDs and high light absorption MOFs provides a new platform for photocatalytic CO₂ reduction.

Effect of Controlling Thiophene Rings on D-A Polymer Photocatalysts Accessed via Direct Arylation for Hydrogen Production

Conjugated polymer photocatalysts for hydrogen production have the advantages of an adjustable structure, strong response in the visible light region, adjustable energy levels, and easy functionalization. Using an atom- and step-economic direct C-H arylation method, dibromocyanostilbene was polymerized with thiophene, dithiophene, terthiophene, and fused thienothiophene and dithienothiophene, respectively, to produce donor-acceptor (D-A)-type linear conjugated polymers containing different thiophene derivatives with different conjugation lengths. Among them, the D-A polymer photocatalyst constructed from dithienothiophene could significantly broaden the spectral response, with a hydrogen evolution rate up to 12.15 mmol h-1 g-1. The results showed that the increase in the number of fused rings on thiophene building blocks was beneficial to the photocatalytic hydrogen production of cyanostyrylphene-based linear polymers. For the unfused dithiophene and terthiophene, the increase in the number of thiophene rings enabled more rotation freedom between the thiophene rings and reduced the intrinsic charge mobility, resulting in lower hydrogen production performance accordingly. This study provides a suitable process for the design of electron donors for D-A polymer photocatalysts.

Enhancing Visible-Light Photodegradation of TC-HCl by Doping Phosphorus into Self-Sensitized Carbon Nitride Microspheres

SSCN is a new type of self-sensitive photocatalyst. It consists of oxygenated carbon nitride-containing microspheres inside and polymerized triazine dye (TBO) formed on its surface by in situ polymerization. The presence of TBO endows SSCN with a wide range of optical responses. However, the TBO would self-degrade under light, making SSCN extremely unstable in photocatalytic reactions and limiting the practical application of SSCN. The introduction of phosphorus into the structure of SSCN significantly improved the electron–hole separation efficiency and reduced the self-degradation of surface TBO. Phosphorus-doped self-sensitive carbon nitride microspheres (P-SSCN) are easily synthesized by a one-pot solvothermal method—the phosphorus source was added to the precursor solution of SSCN. This resulting material was used for the photodegradation of tetracycline hydrochloride (TC-HCl) for the first time, giving improved visible light sensitivity and high stability in the photocatalytic process. This provides a new method for modifying self-sensitive carbon nitride carbon.

Efficient photocatalytic degradation of petroleum oil spills in seawater using a metal-organic framework (MOF)

Photocatalysis is a green approach that has appeared to be a viable option for the degradation of a variety of organic contaminants. This work outlines the process of preparing the titanium-based metal-organic framework (MIL-125) photocatalysts using a simple solvothermal method. Structural, morphological, and optical analysis of samples (MT18 and MT48) was carried out by XRD, FT-IR, Raman, SEM, TGA, BET, and UV-Vis. Results indicated that the sample prepared at 150 °C and reaction time of 48 h (MT48) has a low crystal size of 7 nm with an optical band gap of 3.2 eV and a surface area of 301 m² g^-1. Under UV-visible light irradiation, the as-prepared MOFs proved to upgrade photocatalytic activity in degrading crude oil spills in saltwater. Effects of catalyst dosage and exposure time on the degradation of an oil spill in seawater were studied and analyzed using UV-Vis spectrophotometry and gas chromatography (GC-MS) which emphasized that the use of 250 ppm of MT48 photocatalyst under UV-Vis irradiation can degrade about 99% of oil spills in water after 2 h of exposure. The study's data revealed that MIL-125 could be used to photocatalyzed the cleanup of crude oil spills.

Copper-Modified Titania-Based Photocatalysts for the Efficient Hydrogen Production under UV and Visible Light from Aqueous Solutions of Glycerol

In this study, we have proposed titania-based photocatalysts modified with copper compounds for hydrogen evolution. Thermal pre-treatment of commercial TiO₂ Degussa P25 (DTiO₂) and Hombifine N (HTiO₂) in the range from 600 to 800 °C was carried out followed by the deposition of copper oxides (1-10 wt. % of Cu). The morphology and chemical state of synthesized photocatalysts were studied using X-ray diffraction, UV-Vis diffuse reflectance spectroscopy, high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, and XANES/EXAFS X-ray absorption spectroscopy. Photocatalytic activity was tested in the hydrogen evolution from aqueous solutions of glycerol under ultraviolet (λ = 381 nm) and visible (λ = 427 nm) light. The photocatalysts 2% CuO_x/DTiO₂ T750 and 5% CuO_x/DTiO₂ T700 showed the highest activity under UV irradiation (λ = 380 nm), with the rate of H₂ evolution at the level of 2.5 mmol (H₂) g^-1 h^-1. Under the visible light irradiation (λ = 427 nm), the highest activity of 0.6 mmol (H₂) g^-1 h^-1 was achieved with the 5% CuO_x/DTiO₂ T700 photocatalyst. The activity of these photocatalysts is 50% higher than that of the platinized 1% Pt/DTiO₂ sample. Thus, it was shown for the first time that a simple heat treatment of a commercial titanium dioxide in combination with a deposition of non-noble metal particles led to a significant increase in the activity of photocatalysts and made it possible to obtain materials that were active in hydrogen production under visible light irradiation.

Achievements and Perspectives in Metal–Organic Framework-Based Materials for Photocatalytic Nitrogen Reduction

Metal–organic frameworks (MOFs) are coordination polymers with high porosity that are constructed from molecular engineering. Constructing MOFs as photocatalysts for the reduction of nitrogen to ammonia is a newly emerging but fast-growing field, owing to MOFs’ large pore volumes, adjustable pore sizes, controllable structures, wide light harvesting ranges, and high densities of exposed catalytic sites. They are also growing in popularity because of the pristine MOFs that can easily be transformed into advanced composites and derivatives, with enhanced catalytic performance. In this review, we firstly summarized and compared the ammonia detection methods and the synthetic methods of MOF-based materials. Then we highlighted the recent achievements in state-of-the-art MOF-based materials for photocatalytic nitrogen fixation. Finally, the summary and perspectives of MOF-based materials for photocatalytic nitrogen fixation were presented. This review aims to provide up-to-date developments in MOF-based materials for nitrogen fixation that are beneficial to researchers who are interested or involved in this field.

Heterogeneous activation of peroxymonosulfate by stable Co-MOF for the efficient degradation of organic dye pollutants

A new Co-MOF with splendid stability can act as an excellent heterogeneous catalyst to activate peroxymonosulfate, exhibiting highly efficient organic dye degradation in aquatic environments.