Heterometallic ZnHoMOF as a Dual-Responsive Luminescence Sensor for Efficient Detection of Hippuric Acid Biomarker and Nitrofuran Antibiotics

Eu(III) functionalized ZnMOF based efficient dual-emission sensor integrated with self-calibrating logic gate for intelligent detection of epinephrine

The rapid detection of epinephrine (EPI) in serum holds immense importance in the early disease diagnosis and regular monitoring. On the basis of the coordination post-synthetic modification (PSM) strategy, a Eu3+ functionalized ZnMOF (Eu3+@ZnMOF) was fabricated by anchoring the Eu3+ ions within the microchannels of ZnMOF as secondary luminescent centers. Benefiting from two independent luminescent centers, the prepared Eu3+@ZnMOF shows great potential as a multi-signal self-calibrating luminescent sensor in visually and efficiently detecting serum EPI levels, with high reliability, fast response time, excellentrecycleability, and low detection limits of 17.8 ng/mL. Additionally, an intelligent sensing system was designed in accurately and reliably detecting serum EPI levels, based on the designed self-calibrating logic gates. Furthermore, the possible sensing mechanisms were elucidated through theoretical calculations as well as spectral overlaps. This work provides an effective and promising strategy for developing MOFs-based self-calibrating intelligent sensing platforms to detect bioactive molecules in bodily fluids.

RSM optimization of Friedel-Crafts C-acylation of para-fluorophenol over the catalysis of phosphomolybdic acid encapsulated in MIL-53 (Fe) metal organic frameworks

In this research, a heterogeneous acid catalyst was synthesized by room temperature encapsulation of phosphomolybdic acid (PMA) in the pores of the MIL-53 (Fe) metal organic framework (MOF) under ultrasonic conditions. Then the catalytic activity of PMA@MIL-53 (Fe) was investigated in Friedel-Crafts C-acylation of para-fluorophenol, and this procedure was optimized using response surface methodology based on central composite design (RSM-CCD). The impact of critical reaction parameters including reaction duration, catalyst dosage, and PMA amount in the catalyst was optimized, leading to the formation of the target product in excellent yield at a short reaction time.

Multiresponsive luminescent sensors for antibiotics and CrVI with two luminescent ZnII/CdII coordination complexes

Two new ZnII/CdII luminescent coordination polymers (CPs) based on the V-shaped bis(imidazole) ligand 3,6-bis (1H-benzo[d]imidazol-1-yl)-9-methyl-9H-carbazole (bbimc) with [1,1'-biphenyl]-4,4'-dicarboxylic acid ligand (H2bpdc) have been synthesized under solvothermal conditions: {[Zn(bbimc)(bpdc)]·DMF·2.5H2O} (CP 1), {[Cd(bbimc)(bpdc)]·2DMF} (CP 2). CP 1 and CP 2 both display a uninodal 4-c unimodal sql topology 2D framework with vertex symbols of {44·62}. In addition, the two identical 2D nets of CP 2 were interpenetrated each other to form a 2D + 2D → 3D and generate a 2-fold interpenetrating architecture. Moreover, sensing investigations of CP 1 and CP 2 revealed that both of compounds can be used as a highly sensitive and selective multi-responsive luminescent sensor for sensing Cr2O72-, CrO42- and antibiotics (TC: Tetracycline; CTC: Chlortetracycline) in H2O by exhibiting fluorescence quenching with significant quenching constants (Ksv = 1.369 × 104 M-1 (Cr2O72-), 2.003 × 104 M-1 (CrO42-), 5.343 × 104 M-1 (TC), 8.706 × 104 M-1 (CTC) for CP 1 and 4.452 × 104 M-1 (Cr2O72-), 2.119 × 104 M-1 (CrO42-), 4.175 × 104 M-1 (TC), 1.257 × 105 M-1 (CTC) for CP 2). The detection limit are 0.67 μM (Cr2O72-), 0.48 μM (Cr2O72-), 0.23 μM (TC), 0.14 μM (CTC) for CP 1 and 0.28 μM (Cr2O72-), 0.54 μM (CrO42-), 0.31 μM (TC), 0.098 μM (CTC) for CP 2, respectively. In addition, the probable fluorescence quenching mechanism was studied through experiment and theoretical calculation and the co-existance of competitive absorption (CA) and photoinduced electron transfer (PET) progress contributed to such sensing processes.

Three-Dimensional Hydrogen-Bonded Porous Metal-Organic Framework for Natural Gas Separation with High Selectivity

A 3D hydrogen-bonded metal-organic framework, [Cu(apc)2]n (TJU-Dan-5, Hapc = 2-aminopyrimidine-5-carboxylic acid), was synthesized via a solvothermal reaction. The activated TJU-Dan-5 with permanent porosity exhibits a moderate uptake of 1.52 wt% of hydrogen gas at 77 K. The appropriate BET surface areas and decoration of the internal polar pore surfaces with groups that form extensive hydrogen bonds offer a more favorable environment for selective C2H6 adsorption, with a predicted selectivity for C2H6/CH4 of around 101 in C2H6/CH4 (5:95, v/v) mixtures at 273 K under 100 kPa. The molecular model calculation demonstrates a C-H···π interaction and a van der Waals host-guest interaction of C2H6 with the pore walls. This work provides a strategy for the construction of 3D hydrogen-bonded MOFs, which may have great potential in the purification of natural gas.

Studying Fluorescence Sensing of Acetone and Tryptophan and Antibacterial Properties Based on Zinc-Based Triple Interpenetrating Metal-Organic Skeletons

Two triple interpenetrating Zn(II)-based MOFs were studied in this paper. Named [Zn6(1,4-bpeb)4(IPA)6(H2O)]n (MOF-1) and {[Zn3(1,4-bpeb)1.5(DDBA)3]n·2DMF} (MOF-2), {1,4-bpeb = 1,4-bis [2-(4-pyridy1) ethenyl]benze, IPA = Isophthalic acid, DDBA = 3,3'-Azodibenzoic acid}, they were synthesized by the hydrothermal method and were characterized and stability tested. The results showed that MOF-1 had good acid-base stability and solvent stability. Furthermore, MOF-1 had excellent green fluorescence and with different phenomena in different solvents, which was almost completely quenched in acetone. Based on this phenomenon, an acetone sensing test was carried out, where the detection limit of acetone was calculated to be 0.00365% (volume ratio). Excitingly, the MOF-1 could also be used as a proportional fluorescent probe to specifically detect tryptophan, with a calculated detection limit of 34.84 μM. Furthermore, the mechanism was explained through energy transfer and competitive absorption (fluorescence resonance energy transfer (FRET)) and internal filtration effect (IFE). For antibacterial purposes, the minimum inhibitory concentrations of MOF-1 against Escherichia coli and Staphylococcus aureus were 19.52 µg/mL and 39.06 µg/mL, respectively, and the minimum inhibitory concentrations of MOF-2 against Escherichia coli and Staphylococcus aureus were 68.36 µg/mL and 136.72 µg/mL, respectively.