Ionic Liquids for Development of Heterogeneous Catalysts Based on Nanomaterials for Biocatalysis

Phosphotungstic Acid-Supported Hercynite: A Magnetic Nanocomposite Catalyst for the Selective Esterification of Chloroacetic Acid

This study presents the synthesis and characterization of a novel phosphotungstic acid-functionalized hercynite@SiO2 magnetic core-shell through a three-step procedure. The characterization involved various analyses including Fourier-transform infrared spectroscopy, P-XRD, TGA-DSC, EDAX, inductively coupled plasma optical emission spectroscopy, elemental mapping, scanning electron microscopy, transmission electron microscopy, and value stream mapping. The catalytic performance of the hercynite@SiO2-PTA nanomagnetic composite was examined in the esterification of chloroacetic acid. Results indicate that the developed procedure enables the production of chloroacetic acid esters using a wide range of primary, secondary, and tertiary aliphatic and aromatic alcohols with good to excellent yields and high selectivity. The significance of this work lies in its straightforward synthesis method, minimal time requirement, reduced utilization of hazardous chemicals, and cost-effectiveness. Additionally, the catalyst exhibited magnetic recyclability for up to five cycles with negligible loss in activity. Notably, the synthesized catalyst demonstrated nontoxicity and environmental friendliness.

Ionic Liquids in Metal, Photo-, Electro-, and (Bio) Catalysis

Ionic liquids (ILs) have unique physicochemical properties that make them advantageous for catalysis, such as low vapor pressure, non-flammability, high thermal and chemical stabilities, and the ability to enhance the activity and stability of (bio)catalysts. ILs can improve the efficiency, selectivity, and sustainability of bio(transformations) by acting as activators of enzymes, selectively dissolving substrates and products, and reducing toxicity. They can also be recycled and reused multiple times without losing their effectiveness. ILs based on imidazolium cation are preferred for structural organization aspects, with a semiorganized layer surrounding the catalyst. ILs act as a container, providing a confined space that allows modulation of electronic and geometric effects, miscibility of reactants and products, and residence time of species. ILs can stabilize ionic and radical species and control the catalytic activity of dynamic processes. Supported IL phase (SILP) derivatives and polymeric ILs (PILs) are good options for molecular engineering of greener catalytic processes. The major factors governing metal, photo-, electro-, and biocatalysts in ILs are discussed in detail based on the vast literature available over the past two and a half decades. Catalytic reactions, ranging from hydrogenation and cross-coupling to oxidations, promoted by homogeneous and heterogeneous catalysts in both single and multiphase conditions, are extensively reviewed and discussed considering the knowledge accumulated until now.

Tailoring the interfacial microenvironment of magnetic metal-organic frameworks using amino-acid-based ionic liquids for lipase immobilization

Modifying the carrier interface is a promising method to improve the microenvironment of immobilized enzymes and enhance their activity and stability. In this work, using proline as amino acid, magnetic metal-organic frameworks (MOFs) were modified with an amino-acid-based ionic liquid (AAIL) with two hydroxyl groups followed by adsorption of porcine pancreatic lipase (PPL). The activity recovery of the prepared immobilized lipase (MMOF-AAIL/PPL) was up to 162 % higher than that of MMOF-PPL (70.8 %). The Michaelis constant of MMOF-AAIL/PPL was 0.0742 mM lower than that of MMOF-PPL, but the catalytic efficiency was 0.0223 min-1 which was higher than MMOF-PPL. Furthermore, MMOF-AAIL/PPL maintained 85.6 % residual activity after stored for 40 days and its residual activity was 71.9 % while that for MMOF-PPL was 58.8 % after incubated in 6 M urea for 2 h. Particularly, after ten consecutive cycles, the residual activity of MMOF-AAIL/PPL still reached 84.4 %. In addition, the magnetic properties of the support facilitate the separation process which improves the utilization efficiency of immobilized enzymes.

Theoretical Analysis of Selectivity Differences in Ketoreductases toward Aldehyde and Ketone Carbonyl Groups

Lactobacillus kefir alcohol dehydrogenase (LkADH) and ketoreductase from Chryseobacterium sp. CA49 (ChKRED12) exhibit different chemoselectivity and stereoselectivity toward a substrate with both keto and aldehyde carbonyl groups. LkADH selectively reduces the keto carbonyl group while retaining the aldehyde carbonyl group, producing optically pure R-alcohols. In contrast, ChKRED12 selectively reduces the aldehyde group and exhibits low reactivity toward ketone carbonyls. This study investigated the structural basis for these differences and the role of specific residues in the active site. Molecular dynamics (MD) simulations and quantum chemical calculations were used to investigate the interactions between the substrate and the enzymes and the essential cause of this phenomenon. The present study has revealed that LkADH and ChKRED12 exhibit significant differences in the structure of their respective active pockets, which is a crucial determinant of their distinct chemoselectivity toward the same substrate. Moreover, residues N89, N113, and E144 within LkADH as well as Q151 and D190 within ChKRED12 have been identified as key contributors to substrate stabilization within the active pocket through electrostatic interactions and van der Waals forces, followed by hydride transfer utilizing the coenzyme NADPH. Furthermore, the enantioselectivity mechanism of LkADH has been elucidated using quantum chemical methods. Overall, these findings not only provide fundamental insights into the underlying reasons for the observed differences in selectivity but also offer a detailed mechanistic understanding of the catalytic reaction.

Enzyme-triggered approach to reduce water bodies' contamination using peroxidase-immobilized ZnO/SnO2/alginate nanocomposite

Enzyme immobilization on solid support offers advantages over free enzymes by overcoming characteristic limitations. To synthesize new stable and hyperactive nano-biocatalysts (co-precipitation method), ginger peroxidase (GP) was surface immobilized (adsorption) on ZnO/SnO2 and ZnO/SnO2/SA nanocomposite with immobilization efficacy of 94 % and 99 %, respectively. Thereafter, catalytic and biochemical characteristics of free and immobilized GP were investigated by deploying various techniques, i.e., FTIR, PXRD, SEM, and PL. Diffraction peaks emerged at 2θ values of 26°, 33°, 37°, 51°, 31°, 34°, 36°, 56°, indicating the formation of SnO2 and ZnO. The OH stretching of the H2O molecules was attributed to broad peaks between 3200 and 3500 cm-1, whereas ZnO/SnO2 spikes occurred in the 1626-1637 cm-1 range. SnO stretching mode and ZnO terminal vibrational patterns have been verified at corresponding wavelengths of 625 cm-1 and 560 cm-1. Enzyme entrapment onto substrate was verified via interactions between GP and ZnO/SnO2/SA as corroborated by signals beneath 1100 cm-1. GP-immobilized fractions were optimally active at pH 5, 50 °C, and retained maximum activity after storage of 4 weeks at -4 °C. Kinetic parameters were determined by using a Lineweaver-Burk plot and Vmax for free GP, ZnO/SnO2/GP and ZnO/SnO2/SA/GP with guaiacol as a substrate, were found to be 322.58, 49.01 and 11.45 (μM/min) respectively. A decrease in values of Vmax and KM indicates strong adsorption of peroxidase on support and maximum affinity between nano support and enzyme, respectively. For environmental remediation, free ginger peroxidase (GP), ZnO/SnO2/GP and ZnO/SnO2/SA/GP fractions effectively eradicated highly intricate dye. Multiple scavengers had a significant impact on the depletion of the dye. In conclusion, ZnO/SnO2 and ZnO/SnO2/SA nanostructures comprise an ecologically acceptable and intriguing carrier for enzyme immobilization.

Immobilization of Candida antarctica lipase B on ILs modified CNTs with different chain lengths: Regulation of substrate tunnel "Leucine gating"

Ionic liquids (ILs) have been widely used as chemical modifiers to modify the carriers and thus improve the efficiency, activity and stability of the enzymes. However, as thousands of ILs have been found up to date, it's a huge work for screening and designing suitable ILs for immobilization of enzymes. Moreover, the mechanism of improving enzymes catalytic performance is still remain ambiguous. Thus, this study investigated the impact of ILs with different chain lengths on the enzymatic properties of Candida antarctica lipase B (CALB). Molecular dynamics simulations were employed to examine the interaction between ILs modified CNTs and CALB, as well as their effects on CALB's structure. The results revealed that ILs with different chain lengths significantly influenced the absorption orientation of CALB. Tunnel analysis identified a key role for Leu278 in regulating the open or closed state of Tunnel 2 during CALB's catalytic cycle. The weak interaction analysis demonstrated that ILs with suitable chain lengths provided spatial freedom and formed strong interactions with CNTs and ILs (vdW and hbond). This led to a conformational flip of Leu278, stabilizing the open state of Tunnel 2 and improving the activity and stability of immobilized CALB. This study provides novel insights into the design of new green modifiers to modulate carrier performance and obtain immobilized enzymes with better performance, and establishes a theoretical basis for the design and selection of modifiers for ILs in future work.

Facile immobilization of cholesterol oxidase on Pt,Ru-C nanocomposite and ionic liquid-modified carbon paste electrode for an efficient amperometric free cholesterol biosensing

In present work, the enzyme cholesterol oxidase (ChOx) was immobilized by Nafion® (Naf) on Pt,Ru-C nanocomposite and an ionic liquid (IL)-modified carbon paste electrode (CPE) in order to create cholesterol biosensor (Naf/ChOx/Pt,Ru-C/IL-CPE). The prepared working electrodes were characterized using scanning electron microscopy-energy-dispersive spectrometry, while their electrochemical performance was evaluated using electrochemical impedance spectroscopic, cyclic voltammetric, and amperometric techniques. Excellent synergism between IL 1-allyl-3-methylimidazolium dicyanamide ([AMIM][DCA]), Pt,Ru-C, and ChOx, as modifiers of CPE, offers the most pronounced analytical performance for improved cholesterol amperometric determination in phosphate buffer solution pH 7.50 at a working potential of 0.60 V. Under optimized experimental conditions, a linear relationship between oxidation current and cholesterol concentration was found for the range from 0.31 to 2.46 µM, with an estimated detection limit of 0.13 µM and relative standard deviation (RSD) below 5.5%. The optimized amperometric method in combination with the developed Naf/ChOx/Pt,Ru-C/IL-CPE biosensor showed good repeatability and high selectivity towards cholesterol biosensing. The proposed biosensor was successfully applied to determine free cholesterol in a human blood serum sample via its enzymatic reaction product hydrogen peroxide despite the presence of possible interferences. The percentage recovery ranged from 99.08 to 102.81%, while RSD was below 2.0% for the unspiked as well as the spiked human blood serum sample. The obtained results indicated excellent accuracy and precision of the method, concluding that the developed biosensor can be a promising alternative to existing commercial cholesterol tests used in medical practice.

Supported Ionic Liquid Phase Catalysts Dedicated for Continuous Flow Synthesis

Heterogeneous catalysis, although known for over a century, is constantly improved and plays a key role in solving the present problems in chemical technology. Thanks to the development of modern materials engineering, solid supports for catalytic phases having a highly developed surface are available. Recently, continuous-flow synthesis started to be a key technology in the synthesis of high added value chemicals. These processes are more efficient, sustainable, safer and cheaper to operate. The most promising is the use of heterogeneous catalyst with column-type fixed-bed reactors. The advantages of the use of heterogeneous catalyst in continuous flow reactors are the physical separation of product and catalyst, as well as the reduction in inactivation and loss of the catalyst. However, the state-of-the-art use of heterogeneous catalysts in flow systems compared to homogenous ones remains still open. The lifetime of heterogeneous catalysts remains a significant hurdle to realise sustainable flow synthesis. The goal of this review article was to present a state of knowledge concerning the application of Supported Ionic Liquid Phase (SILP) catalysts dedicated for continuous flow synthesis.

Formation and Surface Behavior of Pt and Pd Complexes with Ligand Systems Derived from Nitrile-functionalized Ionic Liquids Studied by XPS

We studied the formation and surface behavior of Pt(II) and Pd(II) complexes with ligand systems derived from two nitrile-functionalized ionic liquids (ILs) in solution using angle-resolved X-ray photoelectron spectroscopy (ARXPS). These ligand systems enabled a high solubility of the metal complexes in IL solution. The complexes were prepared by simple ligand substitution under vacuum conditions in defined excess of the coordinating ILs, [C₃ CNC₁ Im][Tf₂ N] and [C₁ CNC₁ Pip][Tf₂ N], to immediately yield solutions of the final products. The ILs differ in the cationic head group and the chain length of the functionalized substituent. Our XPS measurements on the neat ILs gave insights in the electronic properties of the coordinating substituents revealing differences in donation capability and stability of the complexes. Investigations on the composition of the outermost surface layers using ARXPS revealed no surface affinity of the nitrile-functionalized chains in the neat ILs. Solutions of the formed complexes in the nitrile ILs showed homogeneous distribution of the solute at the surface with the heterocyclic moieties preferentially orientated towards the vacuum, while the metal centers are rather located further away from the IL/vacuum interface.

Molecule(s) of Interest: I. Ionic Liquids-Gateway to Newer Nanotechnology Applications: Advanced Nanobiotechnical Uses', Current Status, Emerging Trends, Challenges, and Prospects

Ionic liquids are a potent class of organic compounds exhibiting unique physico-chemical properties and structural compositions that are different from the classical dipolar organic liquids. These molecules have found diverse applications in different chemical, biochemical, biophysical fields, and a number of industrial usages. The ionic liquids-based products and procedural applications are being developed for a number of newer industrial purposes, and academic uses in nanotechnology related procedures, processes, and products, especially in nanobiotechnology and nanomedicine. The current article overviews their uses in different fields, including applications, functions, and as parts of products and processes at primary and advanced levels. The application and product examples, and prospects in various fields of nanotechnology, domains of nanosystem syntheses, nano-scale product development, the process of membrane filtering, biofilm formation, and bio-separations are prominently discussed. The applications in carbon nanotubes; quantum dots; and drug, gene, and other payload delivery vehicle developments in the nanobiotechnology field are also covered. The broader scopes of applications of ionic liquids, future developmental possibilities in chemistry and different bio-aspects, promises in the newer genres of nanobiotechnology products, certain bioprocesses controls, and toxicity, together with emerging trends, challenges, and prospects are also elaborated.

Green Dynamic Kinetic Resolution—Stereoselective Acylation of Secondary Alcohols by Enzyme-Assisted Ruthenium Complexes

Dynamic kinetic resolution allows for the synthesis of enantiomerically pure asymmetric alcohols. Cyclopentadienyl-derived ruthenium catalysts were immobilized with an ionic liquid, [BMIM][NTf2], on multiwall carbon nanotubes and used for the racemization of chiral secondary alcohols. This successful approach was combined with the enantioselective enzymatic acylation of secondary alcohols (1-phenylethanol and 1-(1-naphthyl)ethanol) using Novozyme® 435. The resulting catalytic system of the ruthenium racemization catalysts and enzymatic acylation led to chiral esters being obtained by dynamic kinetic resolution. The immobilized catalytic system in the ionic liquid gave the same activity of >96% yield within 6 h and a selectivity of 99% enantiomeric excess as the homogeneous system, while allowing for the convenient separation of the desired products from the catalyst. Additionally, the process can be regarded as green, since the efficient reuse of the catalytic system was demonstrated.

Preparation and Characterization of Magnetic Metal–Organic Frameworks Functionalized by Ionic Liquid as Supports for Immobilization of Pancreatic Lipase

Enzymes are difficult to recycle, which limits their large-scale industrial applications. In this work, an ionic liquid-modified magnetic metal–organic framework composite, IL-Fe₃O₄@UiO-66-NH₂, was prepared and used as a support for enzyme immobilization. The properties of the support were characterized with X-ray powder diffraction (XRD), Fourier-transform infrared (FTIR) spectra, transmission electron microscopy (TEM), scanning electronic microscopy (SEM), and so on. The catalytic performance of the immobilized enzyme was also investigated in the hydrolysis reaction of glyceryl triacetate. Compared with soluble porcine pancreatic lipase (PPL), immobilized lipase (PPL-IL-Fe₃O₄@UiO-66-NH₂) had greater catalytic activity under reaction conditions. It also showed better thermal stability and anti-denaturant properties. The specific activity of PPL-IL-Fe₃O₄@UiO-66-NH₂ was 2.3 times higher than that of soluble PPL. After 10 repeated catalytic cycles, the residual activity of PPL-IL-Fe₃O₄@UiO-66-NH₂ reached 74.4%, which was higher than that of PPL-Fe₃O₄@UiO-66-NH₂ (62.3%). In addition, kinetic parameter tests revealed that PPL-IL-Fe₃O₄@UiO-66-NH₂ had a stronger affinity to the substrate and, thus, exhibited higher catalytic efficiency. The results demonstrated that Fe₃O₄@UiO-66-NH₂ modified by ionic liquids has great potential for immobilized enzymes.

Silica-Based Supported Ionic Liquid-like Phases as Heterogeneous Catalysts

Supported ionic liquid phases offer several advantages related with catalysis. Immobilization of ionic liquid on the solid support provides catalytic activity or efficient matrix for active phases, as enzymes or metal compounds. Ionic liquid can be physically adsorbed on the carrier (supported ionic liquid phase) or chemically grafted to the material surface (supported ionic liquid-like phase). The use of supported ionic liquid phases improves mass transport, reduces ionic amount in the process and, most importantly, enables effortless catalyst separation and recycling. Moreover, chemical modification of the surface material with ionic liquid prevents its leaching, enhancing length of catalyst life. Silica-based materials have become an effective and powerful matrix for supported ionic liquid-like phase due to its cost-efficiency, presence of hydroxyl groups on the surface enabling its functionalization, and specific material properties, such as the size and shapes of the pores. For these reasons, supported ionic liquid-like phase silica-based materials are successfully used in the organic catalysis.

Novel Glucosylimidazolium Ionic-Liquid-Supported Novozym 435 Catalysts - A Proof of Concept for an Acrylation Reaction

A series of novel ionic liquids based on glucose was synthesized in high yields in simple two or three-step reaction procedures. These carbohydrate-based ionic liquids were studied and compared to commercially available imidazolium-based ionic liquids as supports for Novozym 435 in the acrylation of n-butanol. A direct correlation between the availability of hydroxy groups and the overall activity as well as an enhanced recyclability of the biocatalyst has been found for the glucose-based ionic liquids.

Application of High Potential Electrophoretic Particles Modified with High Ionization Mono Ionic Liquid for Electrophoretic Displays

The electrophoretic display (EPD) has attracted widespread attention due to its great visual perception, energy-saving, portability, and bistability. However, the EPD still has many problems in response time, colorization, etc., which limits its practical application. In this paper, novel blue electrophoretic particles were prepared with copper (II) phthalocyanine and high ionization 1-butyl-1-methyl piperidinium bromide mono ionic liquid. It was shown that electrophoretic particles dispersed in a non-polar tetrachloroethylene medium had high Zeta potential and electrophoretic mobility. At the same time, electrophoretic particles showed better dispersion stability. Finally, the prepared blue electrophoretic particles and white titanium dioxide particles were compounded to prepare blue and white dual-color electrophoretic dispersion. An EPD cell was made to test its performance. The results showed that the prepared blue and white dual-color electrophoretic dispersion could realize a reversible response. Piperidine mono ionic liquid increased the surface potential of copper (II) phthalocyanine from +30.50 mV to +60.27 mV, enhancing it by 97.61%. Therefore, we believed that modifying particles with high ionization mono ionic liquid had great applicability to the modification of electrophoretic particles, and blue particles prepared with piperidine mono ionic liquid as a charge control agent (CCA) were excellent candidates for EPDs.

A Novel Modification of Copper (II) Phthalocyanine Particles towards Electrophoretic Displays

Electrophoretic display (EPD) is a popular display technology in recent years. The core of the EPD is electrophoretic particles, and its Zeta potential has an important impact on EPDs. In this work, a method using pyrrolidine mono ionic liquid was proposed to improve the Zeta potential of electrophoretic particles: Copper (II) phthalocyanine pigment was modified with mono ionic liquid 1-Butyl-1-methylpyrrolidinium bromide. The characterization results show that the mono ionic liquid had been successfully coated on pigment particles. At the same time, the dispersion and stability of particles were improved. The modified Copper (II) phthalocyanine pigment could be stably dispersed in tetrachloroethylene for more than 20 days. The Zeta potential increased from 32.42 mV to 49.91 mV, increasing by 53.95%. Finally, the prepared blue electrophoretic particles were compounded with white titanium dioxide to prepare blue and white dual-color electrophoretic dispersion, and then an EPD cell was designed to test its performance. The results show that the prepared electrophoretic dispersion can realize reversible reciprocating motion. Therefore, because of the unique structure and properties of pyrrolidine mono ionic liquids, the blue nanoparticles prepared with pyrrolidine ionic liquids as charge control agents in this study can be used as excellent candidate materials for EPD.

Research progress and applications of silica-based aerogels - a bibliometric analysis

Silica aerogels are three-dimensional porous materials that were initially produced in 1931. During the past nearly 90 years, silica aerogels have been applied extensively in many fields. In order to grasp the progress of silica-based aerogels, we utilize bibliometrics and visualization methods to analyze the research hotspots and the application of this important field. Firstly, we collect all the publications on silica-based aerogels and then analyze their research trends and performances by a bibliometric method regarding publication year/citation, country/institute, journals, and keywords. Following this, the major research hotspots of this area with a focus on synthesis, mechanical property regulation, and the applications for thermal insulation, adsorption, and Cherenkov detector radiators are identified and reviewed. Finally, current challenges and directions in the future regarding silica-based aerogels are also proposed.