Highly Mesoporous g-C3N4 with Uniform Pore Size Distribution via the Template-Free Method to Enhanced Solar-Driven Tetracycline Degradation

Graphitic Carbon Nitride-Supported Layered Double Hydroxides (GCN@FeMg-LDH) for Efficient Water Splitting and Energy Harvesting

The advancement of highly efficient and cost-effective electrocatalysts for electrochemical water splitting, along with the development of triboelectric nanogenerators (TENGs), is crucial for sustainable energy generation and harvesting. In this study, a novel hybrid composite by integrating graphitic carbon nitride (GCN) with an earth-abundant FeMg-layered double hydroxide (LDH) (GCN@FeMg-LDH) was synthesized by the hydrothermal approach. Under controlled conditions, with optimized concentrations of metal ions and GCN, the fabricated electrode, GCN@FeMg-LDH demonstrated remarkably low overpotentials of 0.018 and 0.284 V and 0.101 and 0.365 V at 10 and 600 mA/cm2 toward the hydrogen evolution (HER) and oxygen evolution (OER) reactions, respectively, in 1.0 M KOH. Furthermore, we leveraged the potential of the GCN@FeMg-LDH composite to develop a high-performance TENG suitable for practical electronic applications. The resulting GCN@FeMg-LDH-based TENG device, sized at 3 × 4 cm2, demonstrated a substantial current output of 52 μA and a voltage output of 771 V. Notably, this TENG device exhibited an instantaneous power output of 5780 μW and exceptional stability, enduring over 15 000 cycles. Thus, this study concludes that the GCN@FeMg-LDH composite emerges as a superior candidate for applications in water splitting and TENGs, exhibiting significant promise for advancing clean energy technologies, in addition to lowering greenhouse gas emissions.

Tuning the Structural and Electronic Properties of Zn-Cr LDH/GCN Heterostructure for Enhanced Photodegradation of Estrone in UV and Visible Light

Estrone is an emerging contaminant found in waters and soils all over the world. Conventional water treatment methods are not suitable for estrone removal due to its nonpolarity and low bioavailability. Heterogeneous photocatalysis is a promising approach; however, pristine semiconductors need optimization for efficient estrone photodegradation. Herein, we compared Zn-Cr LDH/GCN heterostructures obtained by three different synthesis methods. The influence of the GCN content in the heterostructure on photoactivity was also tested. The morphology, structure, and electronic properties of the materials were analyzed and compared. The photocatalytic kinetic tests were conducted with 1 ppm of estrone in both UV and visible light, separately. The HLDH-G50 material, obtained by the hydrothermal route and containing 50 wt % of GCN exhibited the highest photocatalytic efficiency. After 1 h, 99.5% of the estrone was degraded in visible light. In UV light, the pollutant concentration was below the detection limit after 0.5 h. The superior effectiveness was caused by numerous factors such as high homogeneity of the formed heterostructure, lower band gap energy of hydrothermal LDH, and increased photocurrent. These characteristics led to prolonged lifetimes of charge carriers, a wider light absorption range, and uniformity of the material for predictable performance. This study highlights the importance of a proper heterostructure engineering strategy for acquiring highly effective photocatalysts designed for water purification. In particular, this work provides innovative insight into comparing different synthesis methods and their influence on materials' properties.

Efficient photocatalytic degradation of textile dye pollutants using thermally exfoliated graphitic carbon nitride (TE-g-C3N4)

Graphitic carbon nitride (g-C3N4), an organic photocatalyst was reported to have beneficial properties to be used in wastewater treatment applications. However, g-C3N4, in its bulk form was found to have poor photocatalytic degradation efficiency due to its inherent limitations such as poor specific surface area and fast electron-hole pair recombination rate. In this study, we have tuned the physiochemical properties of bulk g-C3N4 by direct thermal exfoliation (TE-g-C3N4) and examined their photocatalytic degradation efficiency against abundant textile dyes such as methylene blue (MB), methyl orange (MO), and rhodamine B (RhB). The degradation efficiencies for MB, MO, and RhB dyes are 92 ± 0.18%, 93 ± 0.31%, and 95 ± 0.4% respectively in 60 min of UV light irradiation. The degradation efficiency increased with an increase in the exfoliation temperature. The prepared catalysts were characterized using FTIR, XRD, FE-SEM, EDAX, BET, and UV-DRS. In BET analysis, TE-g-C3N4 samples showed improved surface area (48.20 m2/g) when compared to the bulk g-C3N4 (5.03 m2/g). Further, the TE-g-C3N4 had 2.98 times higher adsorption efficiency than the bulk ones. The free radicals scavenging studies revealed that the superoxide radicals played an important role in the photodegradation for dyes, when compared to the hydroxyl radical (.OH) and the photo-induced holes (h+), Photoluminescence (PL) emission and electrochemical impedance spectroscopy (EIS) spectra of TE-g-C3N4 indicated a lowered electron-hole pairs' recombination rate and an increased photo-induced charge transfer respectively. Further, the TE-g-C3N4 were found to have excellent stability for up to 5 cycles with only a minor decrease in the activity from 92% to 86.2%. These findings proved that TE-g-C3N4 was an excellent photocatalyst for the removal and degradation of textile dyes from wastewater.

Preparation of high-crystalline and non-metal modified g-C3N4 for improving ultrasound-accelerated white-LED-light-driven photocatalytic performances

As a non-metallic organic semiconductor, graphitic carbon nitride (g-C3N4) has received much attention due to its unique physicochemical properties. However, the photocatalytic activity of this semiconductor faces challenges due to factors such as low electronic conductivity and limited active sites provided on its surface. The morphology and structure of g-C3N4, including macro/micro morphology, crystal structure and electronic structure can affect its catalytic activity. Non-metallic heteroatom doping is considered as an effective method to tune the optical, electronic and other physicochemical properties of g-C3N4. Here, we synthesized non-metal-doped highly crystalline g-C3N4 by one-pot calcination method, which enhanced the photocatalytic activity of g-C3N4 such as mesoporous nature, reduced band gap, wide-range photousability, improved charge carrier recombination, and the electrical conductivity was improved. Hence, the use of low-power white-LED-light illumination (λ ≥ 420 nm) and ultrasound (US) irradiation synergistically engendered the Methylene Blue (MB) mineralization efficiency elevated to 100% within 120 min by following the pseudo-first-order mechanism under the following condition (i.e., pH 11, 0.75 g L-1 of O-doped g-C3N4 and S-doped g-C3N4, 20 mg L-1 MB, 0.25 ml s-1 O2, and spontaneous raising temperature). In addition, the rapid removal of MB by sonophotocatalysis was 4 times higher than that of primary photocatalysis. And radical scavenging experiments showed that the maximum distribution of active species corresponds to superoxide radical [Formula: see text]. More importantly, the sonophotocatalytic degradation ability of O-doped g-C3N4 and S-doped g-C3N4 was remarkably sustained even after the sixth consecutive run.

A zeolitic imidazolate framework (ZIF-67) and graphitic carbon nitride (g-C3N4) composite based efficient electrocatalyst for overall water-splitting reaction

Designing of non-noble, cost-effective, sustainable catalysts for water splitting is essential for hydrogen production. In this research work, ZIF-67, g-C3N4, and their composite (1, 3, 5, 6, 8 wt% g-C3N4@ZIF-67) are synthesized, and various techniques, XRD, FTIR, SEM, EDX and BET are used to examine their morphological properties for electrochemical water-splitting. The linkage of ZIF-67 with g-C3N4 synergistically improves the electrochemical kinetics. An appropriate integration of g-C3N4 in ZIF-67 MOF improves the charge transfer between the electrode and electrolyte and makes it a suitable option for electrochemical applications. In alkaline media, the composite of ZIF-67 MOF with g-C3N4 over a Ni-foam exhibits a superior catalyst activity for water splitting application. Significantly, the 3 wt% g-C3N4@ZIF67 composite material reveals remarkable results with low overpotential values of -176 mV@10 mA cm-2, 152 mV@10 mA cm-2 for HER and OER. The catalyst remained stable for 24 h without distortion. The 3 wt% composite also shows a commendable performance for overall water-splitting with a voltage yield of 1.34 v@10 mA cm-2. The low contact angle (54.4°) proves the electrocatalyst's hydrophilic nature. The results of electrochemical water splitting illustrated that 3 wt% g-C3N4@ZIF-67 is an electrically conductive, stable, and hydrophilic-nature catalyst and is suggested to be a promising candidate for electrochemical water-splitting application.

Facile design of surface electric field driven tourmaline/g-C3N4 layered stacked photocatalysts with enhanced photocatalytic activity for antibiotic removal

In the field of photocatalysis, Graphitic carbon nitride (g-C₃N₄) has received a lot of attention for its superior functionality and benefits. However, it suffers from the fatal defect of low charge separation efficiency, which is well addressed by tourmaline's self-contained surface electric field. In this work, tourmaline/g-C₃N₄ (T/CN) composites were successfully synthesized. Due to its surface electric field effect, tourmaline and g-C₃N₄ are stacked on top of each other. It makes its specific surface area increase greatly and more active sites are exposed. Additionally, the rapid separation of photogenerated electron holes under the action of electric field promotes the photocatalytic reaction. T/CN exhibited excellent photocatalytic performance under visible light, with 99.9% Tetracycline (TC 50 mg L^-1) removal after 30 min. Compared to tourmaline (0.0160 min^-1) and g-C₃N₄ (0.0230 min^-1), the T/CN composite's reaction rate constant (0.1754 min^-1) was 11.0 and 7.6 times higher. A series of characterizations also determined the structural properties and catalytic performance of the T/CN composites, which were found to have a larger specific surface area, narrower band gap, and higher charge separation efficiency compared to the monomer. In addition, the toxicity of tetracycline intermediates and their degradative pathways were investigated, and the toxicity of the intermediates was found to be reduced. Given the quenching experiments and active substance determination, it was also found that h⁺ and ·O₂^- play a major role. This work provides more inspiration for photocatalytic material performance research as well as green innovation for environmental management.

Co-Doped, Tri-Doped, and Rare-Earth-Doped g-C3N4 for Photocatalytic Applications: State-of-the-Art

Rapid industrialization and overpopulation have led to energy shortages and environmental pollution, accelerating research to solve the issues. Currently, metal-free photocatalysts have gained the intensive attention of scientists due to their environmental-friendly nature and ease of preparation. It was noticed that g-C3N4 (GCN) consists of a few outstanding properties that could be used for various applications such as water treatment and clean energy production. Nonetheless, bare GCN contains several drawbacks such as high charge recombination, limited surface area, and low light sensitivity. Several solutions have been applied to overcome GCN limitations. Co-doping, tri-doping, and rare-earth-doping can be effective solutions to modify the GCN structure and improve its performance toward photocatalysis. This review highlights the function of multi-elemental and rare-earth dopants in GCN structure, mechanisms, and performance for photocatalytic applications as well as the advantages of co-doping, tri-doping, and rare-earth-doping of GCN. This review summarizes the different roles of dopants in addressing the limitations of GCN. Therefore, this article critically reviewed how multi-elemental and rare-earth-doping affect GCN properties and enhanced photoactivity for various applications.

Fabrication of CdS/Ti3C2/g-C3N4NS Z-scheme composites with enhanced visible light-driven photocatalytic activity

The Ti3C2 and g-C3N4NS were obtained first, and the CdS/Ti3C2/g-C3N4NS Z-scheme composites were prepared via a facile hydrothermal synthesis, and their photocatalytic properties were investigated. The g-C3N4NS with a high surface area displayed higher adsorption and degradation capacity. Compared with Ti3C2/g-C3N4NS and CdS, the visible light photocatalytic activity of CdS/Ti3C2/g-C3N4NS composites was improved. The as-synthesized CTN-4:1 composite exhibited outstanding photocatalytic performance for degradation of orange II, approximately 3.2 and 10.7 times higher than that of Ti3C2/g-C3N4NS and CdS, respectively. The fabrication of CdS/Ti3C2/g-C3N4NS Z-scheme heterostructure using Ti3C2 as electron transfer medium improved the separation ability of the photoinduced e--h+ pairs, thereby leading to the improvement of visible light-driven photocatalytic activity. This finding provides new insights into the construction of high efficiency Z-scheme heterostructure photocatalyst.

g-C3N4: Properties, Pore Modifications, and Photocatalytic Applications

Graphitic carbon nitride (g-C3N4), as a polymeric semiconductor, is promising for ecological and economical photocatalytic applications because of its suitable electronic structures, together with the low cost, facile preparation, and metal-free feature. By modifying porous g-C3N4, its photoelectric behaviors could be facilitated with transport channels for photogenerated carriers, reactive substances, and abundant active sites for redox reactions, thus further improving photocatalytic performance. There are three types of methods to modify the pore structure of g-C3N4: hard-template method, soft-template method, and template-free method. Among them, the hard-template method may produce uniform and tunable pores, but requires toxic and environmentally hazardous chemicals to remove the template. In comparison, the soft templates could be removed at high temperatures during the preparation process without any additional steps. However, the soft-template method cannot strictly control the size and morphology of the pores, so prepared samples are not as orderly as the hard-template method. The template-free method does not involve any template, and the pore structure can be formed by designing precursors and exfoliation from bulk g-C3N4 (BCN). Without template support, there was no significant improvement in specific surface area (SSA). In this review, we first demonstrate the impact of pore structure on photoelectric performance. We then discuss pore modification methods, emphasizing comparison of their advantages and disadvantages. Each method's changing trend and development direction is also summarized in combination with the commonly used functional modification methods. Furthermore, we introduce the application prospects of porous g-C3N4 in the subsequent studies. Overall, porous g-C3N4 as an excellent photocatalyst has a huge development space in photocatalysis in the future.