Revealing the Effect of Synthesis Conditions on the Structural, Optical, and Antibacterial Properties of Cerium Oxide Nanoparticles

Construction of oxygen-rich vacancies and heterojunctions coupled with different morphologies of CeO2/mesoporous TiO2 framework structures for efficient photocatalytic CO2 reduction performance

The coupling of efficient adsorption and effective charge separation with photocatalysts enables the use of sunlight for photocatalytic reduction of carbon dioxide (CO2) into high-value-added products. In this work, we used a straightforward solid-phase hydrothermal technique to build an oxygen-vacancy-rich, heterogeneous interface-coupled CeO2/mesoporous TiO2 framework structural system. The heterogeneous structure was constructed by introducing oxygen-vacancy-rich CeO2 into mesoporous TiO2, which may encourage the transfer of charges and increase the number of active sites and CO2 adsorption by utilizing the coupled synergistic effect of oxygen vacancies and heterogeneous interfaces, and it can also regulate the pathway of the photocatalytic reaction and the selectivity of the products. The composite of CeO2 with different morphologies and oxygen-rich vacancies regulated the system's active sites and degree of exposure and enhanced photocatalytic CO2 reduction. The highest CO yield of 6.25 mmol gcat-1 was obtained by use of the rod CeO2/mesoporous TiO2 composite photocatalyst (R-CeO2/TiO2), and this yield was 1.6 times higher than that of pure mesoporous TiO2 and 1.84 times higher than that of pure R-CeO2. Also, the product selectivity increased by 4.3% compared to a single sample. Combining the Mott-Schottky plot results and the energy-barrier perspective to further explore the photocatalytic reduction of the CO2 reaction mechanism as well as the product selectivity, it appears that the construction of the composite system of oxygen-rich vacancies and heterogeneous boundary-coupled photocatalysis provides a practical pathway for the photocatalytic reaction, which may contribute to the photocatalytic reaction's high efficiency and yield selectivity.

Effect of precipitant on pro-oxidative and antibacterial properties of CeO2 nanoparticles - an experimental study

In this study, the synthesis of pro-oxidative cerium-oxide nanozymes (CeO2 NZs) is reliably performed via the co-precipitation method using ceric ammonium nitrate as a precursor and ammonium carbonate as a precipitating agent. Different samples of CeO2 NZs were prepared by varying the amount of the precipitant. The synthesized NZs were characterized by ultraviolet-visible (UV-vis) spectroscopy, particle size analysis, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and high-resolution transmission electron microscopy (HRTEM) and then checked for their pro-oxidative (peroxidase and oxidase) activity. Furthermore, we studied the NZ kinetics and antibacterial properties of synthesized samples.

Ni-Ru supported on CeO2 obtained by mechanochemical milling for catalytic hydrogen production from ammonia

Developing active and stable catalysts for carbon-free hydrogen production is crucial to mitigate the effects of climate change. Ammonia is a promising carbon-free hydrogen source, as it has a high hydrogen content and is liquid at low pressure, which allows its easy storage and transportation. We have recently developed a nickel-based catalyst with a small content of ruthenium supported on cerium oxide, which exhibits high activity and stability in ammonia decomposition. Here, we investigate mechanochemical milling for its synthesis, a faster and less energy-consuming technique than conventional ones. Results indicate that mechanochemical synthesis increases catalytic activity compared to the conventional incipient wetness impregnation method. The interaction between the metal precursors and the support is key in fine-tuning catalytic activity, which increases linearly with oxygen vacancies in the support. Moreover, the mechanochemical method modifies the oxidation state of Ni and Ru species, with a variation depending on the precursors.

Synthesis, microstructural and optical characterizations of sol-gel grown gadolinium doped cerium oxide ceramics

In this study, through the utilization of the sol-gel combustion tactic, gadolinium (Gd)-doped cerium oxide (CeO2), Ce1-xGdxO2 (x = 0.00, 0.10, 0.20 and 0.30 (GDC)) ceramics were attained. The synthesized GDC ceramics were investigated using X-ray diffraction (XRD) to scrutinize their crystal structures and phase clarities. The obtained GDC ceramics have a single-phase cubic structure and belong to the crystallographic space group fm3̄m (225). The measurement of the diffraction angle of each reflection and the subsequent smearing of the renowned Bragg's relation provided coarse d-interplanar spacings. The stacking fault (SF) values of pure and Gd-doped CeO2 ceramics were assessed. To muse the degree of preferred orientation (σ) of crystallites along a crystal plane (h k l), the texture coefficient (Ci) of each XRD peak of GDC ceramics is gauged. By determining the interplanar distance (dh k l), the Bravais theory sheds light on the material's development. By exploiting Miller indices for the prime (1 1 1) plane, the lattice constants of GDC ceramics and cell volumes were obtained. Multiple techniques were employed to ascertain the microstructural parameters of GDC ceramics. A pyrometer substantiated the density of GDC ceramics. The room temperature (RT) Fourier transform infrared (FTIR) spectra of both un-doped and Gd-doped CeO2 were obtained. The UV-vis-NIR spectrometer recorded the GDC ceramics' reflectance (R) spectra at RT. For both undoped and Gd-doped CeO2, the absorption coefficient (α) spectra showed two distinct peaks. The R-dependent refractive index (η) and the α-dependent extinction coefficient (k) were determined for all GDC samples. The optical band gap (Eg) was obtained by integrating the Tauc and Kubelka-Munk approaches for GDC ceramics. For each GDC sample, the imaginary (εi) and real (εr) dielectric constants, as well as the dissipation factor (tan δ), were determined local to the characteristic wavelength (λc). Calculations were made for the Urbach energy (EU) and Urbach absorption coefficient (α0) for GDC ceramics. The minimum and maximum values of optical (σo) and electrical (σe) conductivity for GDC ceramics were determined. The volume (VELF) and surface (SELF) energy loss functions, which depend on the constants εi and εr, were used to measure electrons' energy loss rates as they travel across the surface. Raman spectroscopy revealed various vibrational modes in GDC ceramics. Finally, the implications are discussed herein.

Tailoring the Structural and Optical Properties of Cerium Oxide Nanoparticles Prepared by an Ecofriendly Green Route Using Plant Extracts

The present study explores an environmentally friendly green approach to obtain cerium oxide nanoparticles via a biomediated route using Mellisa officinalis and Hypericum perforatum plant extracts as reducing agents. The as-prepared nanoparticles were studied for their structural and morphological characteristics using XRD diffractometry, scanning electron microscopy, Raman, fluorescence and electronic absorption spectra, and X-ray photoelectron spectroscopy (XPS). The XRD pattern has shown the centered fluorite crystal structure of cerium oxide nanoparticles with average crystallite size below 10 nm. These observations were in agreement with the STEM data. The cubic fluorite structure of the cerium oxide nanoparticles was confirmed by the vibrational mode around 462 cm-1 due to the Ce-08 unit. The optical band gap was estimated from UV-Vis reflectance spectra, which was found to decrease from 3.24 eV to 2.98 eV. A higher specific area was determined for the sample using M. officinalis aqueous extract. The EDX data indicated that only cerium and oxygen are present in the green synthesized nanoparticles.

Cerium Oxide Nanoparticles Synthesis using Alhagi Maurorum Leaf Extract and Evaluation of Their Cytotoxic Effect on Breast Cancer Cell Lines and Antibacterial Effects

INTRODUCTION

Green synthesis offers a fast, simple, and economical method for producing metallic nanoparticles.The basis of this method is to obtain nanoparticles using natural materials, such as plants, fungi, and bacteria, instead of harmful and expensive chemical-reducing agents. In this study, CeO2NPs were produced using Alhagi maurorum extract, and their anticancer and antibacterial activities were evaluated.

METHODS

Alhagi maurorum extract was prepared according to a previously described protocol, and CeO2NPs were synthesized from the salt of this extract. The resulting nanoparticles were characterized using Transmission electron microscopy (TEM), scanning electron microscope (SEM), and X-ray diffraction (XRD) techniques. The antibacterial and cytotoxic effects of the nanoparticles were measured by MIC, MBC, and MTT assays, respectively. The results were analyzed using one-way analysis of variance (ANOVA) using Prism software.

RESULTS

The MTT assay on breast cancer cell lines showed that the cytotoxic effect of CeO2NPs on cell lines was concentration-dependent. In addition, this nanoparticle was more effective against Gram-positive bacteria.

CONCLUSION

These nanoparticles can be used as cancer drug delivery systems with specific targeting at low concentrations in addition to anticancer treatments. It can also have biological and medicinal applications, such as natural food preservation and wound dressing.

Coating of Filter Materials with CeO2 Nanoparticles Using a Combination of Aerodynamic Spraying and Suction

Textiles and nonwovens (including those used in ventilation systems as filters) are currently one of the main sources of patient cross-infection. Healthcare-associated infections (HAIs) affect 5-10% of patients and stand as the tenth leading cause of death. Therefore, the development of new methods for creating functional nanostructured coatings with antibacterial and antiviral properties on the surfaces of textiles and nonwoven materials is crucial for modern medicine. Antimicrobial filter technology must be high-speed, low-energy and safe if its commercialization and mass adoption are to be successful. Cerium oxide nanoparticles can act as active components in these coatings due to their high antibacterial activity and low toxicity. This paper focuses on the elaboration of a high-throughput and resource-saving method for the deposition of cerium oxide nanoparticles onto nonwoven fibrous material for use in air-conditioning filters. The proposed spraying technique is based on the use of an aerodynamic emitter and simultaneous suction. Cerium oxide nanoparticles have successfully been deposited onto the filter materials used in air conditioning systems; the antibacterial activity of the ceria-modified filters exceeded 4.0.

Phytomediated-Assisted Preparation of Cerium Oxide Nanoparticles Using Plant Extracts and Assessment of Their Structural and Optical Properties

Cerium oxide nanoparticles were obtained using aqueous extracts of Chelidonium majus and Viscum album. X-ray diffractometry analysis confirmed the crystalline structure of the synthesized cerium oxide nanoparticles calcined at 600 °C. Scanning electron microscopy, UV-Vis reflectance and Raman spectroscopy, XPS, and fluorescence studies were utilized to interpret the morphological and optical properties of these nanoparticles. The STEM images revealed the spherical shape of the nanoparticles and that they were predominantly uniform in size. The optical band gap of our cerium nanoparticles was determined to be 3.3 and 3.0 eV from reflectance measurements using the Tauc plots. The nanoparticle sizes evaluated from the Raman band at 464 cm^-1 due to the F2g mode of the cubic fluorite structure of cerium oxide are close to those determined from the XRD and STEM data. The fluorescence results showed emission bands at 425, 446, 467, and 480 nm. The electronic absorption spectra have exhibited an absorption band around 325 nm. The antioxidant potential of the cerium oxide nanoparticles was estimated by DPPH scavenging assay.

Characterization and evaluation of the therapeutic benefits of pure and lanthanides mono- and co-doped zinc oxide nanoparticles

The effect of Lanthanides-doping on the structural, optical, morphological, antibacterial and anticancer properties of zinc oxide (ZnO) nanoparticles was investigated. Pure ZnO, Zn_0.9La_0.1O, Zn_0.9Ce_0.1O, and Zn_0.9La_0.05Ce_0.05O were fabricated through the chemical co-precipitation route. The structural and morphological properties were studied using the X-ray diffraction (XRD) and transmission electron microscopy (TEM), respectively. The optical properties were analyzed by photoluminescence spectroscopy (PL). The inhibitory effect of the synthesized nanoparticles (NPs) was assessed against six bacterial strains using the agar well diffusion and broth micro-dilution methods. The anticancer potential of the synthesized NPs was assessed against two human colon cancer cell lines Caco-2 and HCT-116. The appearance of the La₂O₃ and CeO₂ secondary phases upon doping La³⁺ and Ce³⁺ ions induced structural and morphological changes. The large distorted hexagonal morphology of pure ZnO is transformed into small sized distorted hexagonal form. The photoluminescence spectra revealed the point defects resulting from Lanthanum (La) and cerium (Ce) doping. The prepared NPs significantly inhibited the growth of the six investigated bacteria and induced cytotoxic effects and morphological changes against Caco-2 and HCT-116 cell lines. This study showed that doping ZnO with lanthanide ions such as La³⁺ and Ce³⁺ provide promising biological applications. These NPs showed a potent antibacterial and anticancer effect towards the investigated bacterial strains and colon cancer cell lines. These findings point to the importance of the biological applications of NPs, and the possibility of investigating other biomedical applications for NPs.

Size Effect of Nanoceria Blended with CIME Biodiesel on Engine Characteristics

Diesel fuel blends with biodiesels are expected to mitigate the rising price and demand of conventional fuels. Biodiesel fuel blends are also known to reduce engine emissions. Biodiesel is produced from various sources, one of which is Calophyllum Inophyllum methyl ester biodiesel (CIMEBD). Even though it serves to mitigate the energy crisis and has a low overall carbon footprint, CIMEBD has certain negative issues relating to engine performance and emission characteristics. Nanoparticle (NP) addition is known to enhance the engine performance characteristics of next generation biofuels. CeO₂ (cerium oxide or ceria) NPs of varying size are used in this study along with 25:75 biodiesel-diesel (BD) blend and a fixed NP concentration of 90 ppm. Ceria NP-doped fuel is shown to have better engine performance compared to diesel and BD blend for all load conditions. Improvements in brake thermal efficiency (BTE) and brake-specific fuel consumption (BSFC) values equal to +30% and -46%, respectively, are observed from experiments for ceria NP-doped biodiesel, compared to diesel-biodiesel (BD) blend. Ceria NPs in the 20 to 40 nm range have optimum engine performance characteristics. Compared to BD blends, NP-doped biodiesel shows improvements in NOx, CO, CO₂, UHC, and soot parameters up to -35%, -60%, -35%, -38%, and -40%, respectively. Likewise, the optimum size of ceria NPs is in the range 20-40 nm for better emission characteristics.

Investigating the Vibrational, Magnetic and Dielectric Properties, and Antioxidant Activity of Cerium Oxide Nanoparticles

Dielectric, magnetic and Raman measurements of cerium oxide nanoparticles obtained by the precipitation method are discussed. Morphological study was performed by scanning electron microscopy, confirming the formation of nanoparticles of 5-27 nm. The Raman spectra exhibited a strong band around 465 cm^-1, corresponding to the symmetrical stretching mode of the Ce-O8 vibrational unit. The nature of the room temperature ferromagnetism of cerium oxide nanoparticles was analyzed, taking into account the oxygen defects at the surface or interface of the nanoparticles. The evolution of dielectric constant, ε', and dielectric loss, ε″ was studied as a function of frequency at different temperatures. Additionally, the variation of the electric conductivity versus temperature was investigated. Finally, complex impedance study of the cerium oxide nanoparticles was performed.