Convolutional Neural Network Based on Crossbar Arrays of (Co-Fe-B)x(LiNbO3)100-x Nanocomposite Memristors

Parylene-MoOx crossbar memristors as a volatile reservoir and non-volatile readout: a homogeneous reservoir computing system

From the very beginning, the emulation of biological principles has been the primary avenue for the development of energy-efficient artificial intelligence systems. Reservoir computing, which has a solid biological basis, is particularly appealing due to its simplicity and efficiency. So-called memristors, resistive switching elements with complex dynamics, have proved beneficial for replicating both principal parts of a reservoir computing system. However, these parts require distinct behaviors found in differing memristive structures. The development of a homogeneous memristive reservoir computing system will significantly facilitate and reduce the fabrication process cost. The following work employs the co-existence of volatile and non-volatile regimes in parylene-MoOx crossbar memristors controlled by compliance current for this aim. The stable operation of the memristors under study is confirmed by low cycle-to-cycle and device-to-device variations of the switching voltages. For the transition between the volatile and non-volatile regimes, factors such as compliance current and reading voltage along with possible intrinsic origins are discussed. The results provide a foundation for the future hardware development of a homogeneous parylene-based reservoir computing system, considering high MNIST dataset classification accuracy (∼96%).

Modulation of polyaniline memristive device switching voltage by nucleotide-free analogue of vitamin B12

Memristive devices offer essential properties to become a part of the next-generation computing systems based on neuromorphic principles. Organic memristive devices exhibit a unique set of properties which makes them an indispensable choice for specific applications, such as interfacing with biological systems. While the switching rate of organic devices can be easily adjusted over a wide range through various methods, controlling the switching potential is often more challenging, as this parameter is intricately tied to the materials used. Given the limited options in the selection conductive polymers and the complexity of polymer chemical engineering, the most straightforward and accessible approach to modulate switching potentials is by introducing specific molecules into the electrolyte solution. In our study, we show polyaniline (PANI)-based device switching potential control by adding nucleotide-free analogue of vitamin B12, aquacyanocobinamide, to the electrolyte solution. The employed concentrations of this molecule, ranging from 0.2 to 2 mM, enabled organic memristive devices to achieve switching potential decrease for up to 100 mV, thus providing a way to control device properties. This effect is attributed to strong aromatic interactions between PANI phenyl groups and corrin macrocycle of the aquacyanocobinamide molecule, which was supported by ultraviolet-visible spectra analysis.

Adapted MLP-Mixer network based on crossbar arrays of fast and multilevel switching (Co-Fe-B)x(LiNbO3)100-x nanocomposite memristors

MLP-Mixer based on multilayer perceptrons (MLPs) is a novel architecture of a neuromorphic computing system (NCS) introduced for image classification tasks without convolutional layers. Its software realization demonstrates high classification accuracy, although the number of trainable weights is relatively low. One more promising way of improving the NCS performance, especially in terms of power consumption, is its hardware realization using memristors. Therefore, in this work, we proposed an NCS with an adapted MLP-Mixer architecture and memristive weights. For this purpose, we used a passive crossbar array of (Co-Fe-B)x(LiNbO3)100-x memristors. Firstly, we studied the characteristics of such memristors, including their minimal resistive switching time, which was extrapolated to be in the picosecond range. Secondly, we created a fully hardware NCS with memristive weights that are capable of classification of simple 4-bit vectors. The system was shown to be robust to noise introduction in the input patterns. Finally, we used experimental memristive characteristics to simulate an adapted MLP-Mixer architecture that demonstrated a classification accuracy of (94.7 ± 0.3)% on the Modified National Institute of Standards and Technology (MNIST) dataset. The obtained results are the first steps toward the realization of memristive NCS with a promising MLP-Mixer architecture.

Non-Volatile Memory and Synaptic Characteristics of TiN/CeOx/Pt RRAM Devices

In this study, we investigate the synaptic characteristics and the non-volatile memory characteristics of TiN/CeOx/Pt RRAM devices for a neuromorphic system. The thickness and chemical properties of the CeOx are confirmed through TEM, EDS, and XPS analysis. A lot of oxygen vacancies (ions) in CeOx film enhance resistive switching. The stable bipolar resistive switching characteristics, endurance cycling (>100 cycles), and non-volatile properties in the retention test (>10,000 s) are assessed through DC sweep. The filamentary switching model and Schottky emission-based conduction model are presented for TiN/CeOx/Pt RRAM devices in the LRS and HRS. The compliance current (1~5 mA) and reset stop voltage (−1.3~−2.2 V) are used in the set and reset processes, respectively, to implement multi-level cell (MLC) in DC sweep mode. Based on neural activity, a neuromorphic system is performed by electrical stimulation. Accordingly, the pulse responses achieve longer endurance cycling (>10,000 cycles), MLC (potentiation and depression), spike-timing dependent plasticity (STDP), and excitatory postsynaptic current (EPSC) to mimic synapse using TiN/CeOx/Pt RRAM devices.