Effective Mechanical Properties and Thickness Determination of Boron Nitride Nanosheets Using Molecular Dynamics Simulation

Dual-Modified Electrospun Fiber Membrane as Separator with Excellent Safety Performance and High Operating Temperature for Lithium-Ion Batteries

Polyacrylonitrile/Boric acid/Melamine/the delaminated BN nanosheets electrospun fiber membrane (PB3N1BN) with excellent mechanical property, high thermal stability, superior flame-retardant performance, and good wettability are fabricated by electrospinning PAN/DMF/H3BO3/C3H6N6/ the delaminated BN nanosheets (BNNSs) homogeneous viscous suspension and followed by a heating treatment. BNNSs are obtained by delaminating the bulk h-BN in isopropyl alcohol (IPA) with an assistance of Polyvinylpyrrolidone (PVP). Benefiting from the cross-linked pore structure and high-temperature stability of BNNSs, PB3N1BN electrospun fiber membrane delivers high thermal dimensional stability (almost no size contraction at 200 °C), excellent mechanical property (19.1 MPa), good electrolyte wettability (contact angle about 0°), and excellent flame retardancy (minimum total heat release of 3.2 MJ m-2). Moreover, the assembled LiFePO4/PB3N1BN/Li asymmetrical battery using LiFePO4 as the cathode and Li as the anode has a high capacity (169 mAh g-1 at 0.5 C), exceptional rate capability (129 mAh g-1 at 5 C), the prominent cycling stability without obvious decay after 400 cycles, and a good discharge capacity of 152 mAh g-1 at a high temperature of 80 °C. This work offers a new structural design strategy toward separators with excellent mechanical performance, good wettability, and high thermal stability for lithium-ion batteries.

Mechanically robust, transparent, and UV-shielding composite of Na-Alginate and maleic acid-functionalized boron nitride nanosheets with improved antioxidant property

Maleic acid functionalized boron nitride nanosheets (BNNS-MA)/Na-Alginate composite with enhanced mechanical, UV-shielding and antioxidation properties have been fabricated for the first time by solvent evaporation from a homogeneous aqueous dispersion of BNNS-MA/Na-Alginate composite solution. The composite fabrication was driven by homogenous nano-integrations and chemistry of compatibilization of BNNS-MA with Na-Alginate through H-bonding interactions between -COOH functional group of BNNS-MA and -OH, -COONa groups of Na-Alginate. The BNNS-MA/Na-Alginate composites show significant enhancement of mechanical, UV-blocking and antioxidant properties compared to the Na-Alginate. Integrating only 1 wt% BNNS-MA improved the UV-blocking, tensile strength, and antioxidant properties of Na-Alginate film by 99.1%, 73% and 60.3%, respectively. Overall, our findings of BNNS-MA integrated Na-Alginate composite films with improved physical, mechanical, UV shielding, and antioxidant functionalities is very promising to open new insight in the field of transparent UV-protected biopolymer film for consumer products, packaging, cosmetics, and engineering applications.

A Study of the Mechanical Behaviour of Boron Nitride Nanosheets Using Numerical Simulation

Hexagonal boron nitride (h-BN) nanosheets are attractive materials for various applications that require efficient heat transfer, surface adsorption capability, biocompatibility, and flexibility, such as optoelectronics and power electronics devices, nanoelectromechanical systems, and aerospace industry. Knowledge of the mechanical behavior of boron nitride nanosheets is necessary to achieve accurate design and optimal performance of h-BN-based nanodevices and nanosystems. In this context, the Young's and shear moduli and Poisson's ratio of square and rectangular boron nitride nanosheets were evaluated using the nanoscale continuum modeling approach, also known as molecular structural mechanics. The latter allows robust and rapid assessment of the elastic constants of nanostructures with graphene-like lattices. To date, there is a lack of systematic research regarding the influence of input parameters for numerical simulation, loading conditions, size, and aspect ratio on the elastic properties of the h-BN nanosheets. The current study contributes to filling this gap. The results allow, on the one hand, to point out the input parameters that lead to better agreement with those available in the literature. On the other hand, the Young's and shear moduli, and Poisson's ratio calculated in the present work contribute to a benchmark for the evaluation of elastic constants of h-BN nanosheets using theoretical methods.

A Physical Model to Describe the Motion Behavior of BNNSs under Nanosecond Pulses

This paper presents a physical model that provides a comprehensive understanding of the motion behavior of boron nitride nanosheets (BNNSs) immersed in ultrapure deionized water and subjected to a series of nanosecond pulses. In a study conducted by Y. Mi et al. The authors explored the global alignment behavior of BNNSs and fitted the experimental data with an exponential decay function. However, this function lacks clear physical mechanisms and the significance of the fitting parameters remains unclear. To address this issue, we have developed a kinetic model that explicitly describes the underlying physical mechanisms. Furthermore, we propose a simplified mathematical model that not only predicts the displacement of BNNSs but also estimates the total time, velocity, and acceleration of the motion process.

Reply to the 'Comment on "Two-dimensional penta-like PdPSe with a puckered pentagonal structure: a first-principles study"' by S. Chowdhury, F. Shojaei and B. Mortazavi, Phys. Chem. Chem. Phys., 2023, , DOI: 10.1039/D2CP01587K

We respond to the recent criticism of our paper [Phys. Chem. Chem. Phys., 2022, 24, 9990–9997] and provide further discussion on the analysis of the PdPSe monolayer.

Simulation of BNNSs Dielectrophoretic Motion under a Nanosecond Pulsed Electric Field

Using a nanosecond pulsed electric field to induce orientation and arrangement of insulating flake particles is a novel efficient strategy, but the specific mechanism remains unclear. In this study, the dielectrophoretic motion of boron nitride nanosheets (BNNSs) in ultrapure water under a nanosecond pulsed electric field is simulated for the first time. First, the simulation theory is proposed. When the relaxation polarization time of the dielectric is much shorter than the pulse voltage width, the pulse voltage high level can be considered a short-term DC voltage. On this basis, the Arbitrary Lagrangian–Euler (ALE) method is used in the model, considering the mutual ultrapure water–BNNS particles-nanosecond pulsed electric field dielectrophoretic interaction, to study the influence of different BNNSs self-angle α and relative angle β on local orientation and global arrangement. The particles are moved by the dielectrophoretic force during the pulse voltage high level and move with the ultrapure water flow at the zero level, without their movement direction changing during this period, so the orientation angle and distance changes show step-like and wave-like curves, respectively. The model explains the basic mechanism of dielectrophoretic motion of BNNSs under a pulsed electric field and summarizes the motion law of BNNSs, providing a reference for subsequent research.

Heterogeneous deformation of two-dimensional materials for emerging functionalities

Atomically thin 2D materials exhibit strong intralayer covalent bonding and weak interlayer van der Waals interactions, offering unique high in-plane strength and out-of-plane flexibility. While atom-thick nature of 2D materials may cause uncontrolled intrinsic/extrinsic deformation in multiple length scales, it also provides new opportunities for exploring coupling between heterogeneous deformations and emerging functionalities in controllable and scalable ways for electronic, optical, and optoelectronic applications. In this review, we discuss (i) the mechanical characteristics of 2D materials, (ii) uncontrolled inherent deformation and extrinsic heterogeneity present in 2D materials, (iii) experimental strategies for controlled heterogeneous deformation of 2D materials, (iv) 3D structure-induced novel functionalities via crumple/wrinkle structure or kirigami structures, and (v) heterogeneous strain-induced emerging functionalities in exciton and phase engineering. Overall, heterogeneous deformation offers unique advantages for 2D materials research by enabling spatial tunability of 2D materials' interactions with photons, electrons, and molecules in a programmable and controlled manner.

Co-Solvent Exfoliation of Hexagonal Boron Nitride: Effect of Raw Bulk Boron Nitride Size and Co-Solvent Composition

Exfoliation of two-dimensional boron nitride nanosheets (BNNSs) from parent bulk material has been receiving intensive attention because of its fascinating physical properties. Liquid exfoliation is a simple, scalable approach to produce single-layer or few-layer BNNS. In this paper, water/propanol co-solvent exfoliation of bulk boron nitride under the assistance of sonication was investigated in detail. Special attention was paid on the effect of raw bulk boron nitride size and co-solvent composition. The results show that sonication of small-size hexagonal boron nitride tends to generate large nanosheets, due to a predominant solvent wedge effect. In addition, it is found that the composition of water/propanol co-solvent has an important effect on exfoliation efficiency. Interestingly, although two isomers of 1-propanol (NPA) and 2-propanol (IPA) have the same molecular weight and similar surface tension, their aqueous solutions allow the formation of boron nitride nanosheets dispersion with markedly different concentrations. It is proposed that due to their spatial configuration difference, NPA with its longer molecular chain and fewer hydrophobic methyl group tends to form dynamic water-NPA clusters with larger size than water-IPA clusters. The hydrodynamic radius of the co-solvent "clusters" was calculated to be 0.72 nm for water/NPA system and 0.44 nm for water/IPA system at their maximum, respectively. Their size changes, represented by two curves, indicate a strong "cluster size" effect on exfoliation efficiency. Our work provides an insight into co-solvent exfoliation of hexagonal boron nitride and emphasizes the importance of co-solvent cluster size in exfoliation efficiency.

Size and temperature effect of Young's modulus of boron nitride nanosheet

Boron nitride nanosheets (BNNSs), a new type of wide bandgap nanomaterial, has attracted great attention due to their excellent properties and potential applications. Thus, it is necessary to have a comprehensive understanding of the mechanical properties of BNNSs in various working conditions. This paper presents an analytical model based on molecular mechanics to study the size effect and temperature effect on the Young's modulus of BNNSs. A closed-form formulation is derived for Young's modulus as a function of the length of B-N bonds and the out-plane displacement. It is shown that the chirality and the size of the BNNSs affect the length of BN bonds in molecular dynamic (MD) simulations. It is also found that the length of BN bonds and the out-plane displacement in a monolayer BNNS is remarkably temperature dependent. Therefore, the sizes and the temperatures can affect the Young's modulus of BNNSs. The expressions developed in this paper are employed to investigate the Young's modulus for zigzag and armchair BNNS with various sizes and temperatures. The present model, associating with a beam model, provides a simple method to calculate elastic properties which takes into account all bonded energies and force coefficient changes with atoms distance. The results of size effect and temperature effect are in good agreement with data of simulation performed in finite element method (FEM) simulation and MD simulation. The present study provides a molecular mechanics model to predict the Young's modulus of a monolayer BNNS, and the present model may be applied to other two-dimensional (2D) materials in further study.

Interfacial Characteristics of Boron Nitride Nanosheet/Epoxy Resin Nanocomposites: A Molecular Dynamics Simulation

The interface between nanofillers and matrix plays a key role in determining the properties of nanocomposites, but the interfacial characteristics of nanocomposites such as molecular structure and interaction strength are not fully understood yet. In this work, the interfacial features of a typical nanocomposite, namely epoxy resin (EP) filled with boron nitride nanosheet (BNNS) are investigated by utilizing molecular dynamics simulation, and the effect of surface functionalization is analyzed. The radial distribution density (RDD) and interfacial binding energy (IBE) are used to explore the structure and bonding strength of nanocomposites interface. Besides, the interface compatibility and molecular chain mobility (MCM) of BNNS/EP nanocomposites are analyzed by cohesive energy density (CED), free volume fraction (FFV), and radial mean square displacement (RMSD). The results indicate that the interface region of BNNS/EP is composed of three regions including compact region, buffer region, and normal region. The structure at the interfacial region of nanocomposite is more compact, and the chain mobility is significantly lower than that of the EP away from the interface. Moreover, the interfacial interaction strength and compatibility increase with the functional density of BNNS functionalized by CH3–(CH2)4–O– radicals. These results adequately illustrate interfacial characteristics of nanocomposites from atomic level.

Tensile and Interfacial Loading Characteristics of Boron Nitride-Carbon Nanosheet Reinforced Polymer Nanocomposites

The discovery of hybrid boron nitride–carbon (BN–C) nanostructures has triggered enormous research interest in the design and fabrication of new generation nanocomposites. The robust design of these nanocomposites for target applications requires their mechanical strength to be characterized with a wide range of factors. This article presents a comprehensive study, with the aid of molecular dynamics analysis, of the tensile loading mechanics of BN–C nanosheet reinforced polyethylene (PE) nanocomposites. It is observed that the geometry and lattice arrangement of the BN–C nanosheet influences the tensile loading characteristics of the nanocomposites. Furthermore, defects in the nanosheet can severely impact the tensile loading resistance, the extent of which is determined by the defect’s location. This study also found that the tensile loading resistance of nanocomposites tends to weaken at elevated temperatures. The interfacial mechanics of the BN–C nanocomposites are also investigated. This analysis revealed a strong dependency with the carbon concentration in the BN–C nanosheet.