Preparation and Study of the Antibacterial Applications and Oxidative Stress Induction of Copper Maleamate-Functionalized Mesoporous Silica Nanoparticles

Nanostructured N/S doped carbon dots/mesoporous silica nanoparticles and PVA composite hydrogel fabrication for anti-microbial and anti-biofilm application

Regarding the convergence of the worldwide epidemic, the appearance of bacterial infection has occasioned in a melodramatic upsurge in bacterial pathogens with confrontation against one or numerous antibiotics. The implementation of engineered nanostructured particles as a delivery vehicle for antimicrobial agent is one promising approach that could theoretically battle the setbacks mentioned. Among all nanoparticles, silica nanoparticles have been found to provide functional features that are advantageous for combatting bacterial contagion. Apart from that, carbon dots, a zero-dimension nanomaterial, have recently exhibited their photo-responsive property to generate reactive oxygen species facilitating to enhance microorganism suppression and inactivation ability. In this study, potentials of core/shell mesoporous silica nanostructures (MSN) in conjugation with carbon dots (CDs) toward antimicrobial activity against Staphylococcus aureus, Pseudomonas aeruginosa and Escherichia coli have been investigated. Nitrogen and sulfur doped CDs (NS/CDs) conjugated with MSN which were cost effective nanoparticles exhibited much superior antimicrobial activity for 4 times as much as silver nanoparticles against all bacteria tested. Among all nanoparticles tested, 0.40 M NS/CDs@MSN showed the greatest minimal biofilm inhibitory at very low concentration (< 0.125 mg mL-1), followed by 0.20 M NS/CDs@MSN (0.5 mg mL-1), CD@MSN (25 mg mL-1), and MSN (50 mg mL-1), respectively. Immobilization of NS/CDs@MSN in polyvinyl alcohol (PVA) hydrogel was performed and its effect on antimicrobial activity, biofilm controlling efficiency, and cytotoxicity toward fibroblast (NIH/3 T3 and L-929) cells was additionally studied for further biomedical applications. The results demonstrated that 0.40 M NS/CDs-MSN@PVA hydrogel exhibited the highest inhibitory effect on S. aureus > P. aeruginosa > E. coli. In addition, MTT assay revealed some degree of toxicity of 0.40 M NS/CDs-MSN@PVA hydrogel against L-929 cells by a slight reduction of cell viability from 100% to 81.6% when incubated in the extract from 0.40 M NS/CDs-MSN@PVA hydrogel, while no toxicity of the same hydrogel extract was detected toward NIH/3 T3 cells.

Organically Modified Mesoporous Silica Nanoparticles against Bacterial Resistance

Bacterial antimicrobial resistance is posed to become a major hazard to global health in the 21st century. An aggravating issue is the stalled antibiotic research pipeline, which requires the development of new therapeutic strategies to combat antibiotic-resistant infections. Nanotechnology has entered into this scenario bringing up the opportunity to use nanocarriers capable of transporting and delivering antimicrobials to the target site, overcoming bacterial resistant barriers. Among them, mesoporous silica nanoparticles (MSNs) are receiving growing attention due to their unique features, including large drug loading capacity, biocompatibility, tunable pore sizes and volumes, and functionalizable silanol-rich surface. This perspective article outlines the recent research advances in the design and development of organically modified MSNs to fight bacterial infections. First, a brief introduction to the different mechanisms of bacterial resistance is presented. Then, we review the recent scientific approaches to engineer multifunctional MSNs conceived as an assembly of inorganic and organic building blocks, against bacterial resistance. These elements include specific ligands to target planktonic bacteria, intracellular bacteria, or bacterial biofilm; stimuli-responsive entities to prevent antimicrobial cargo release before arriving at the target; imaging agents for diagnosis; additional constituents for synergistic combination antimicrobial therapies; and aims to improve the therapeutic outcomes. Finally, this manuscript addresses the current challenges and future perspectives on this hot research area.

Antibacterial Properties of Mesoporous Silica Nanoparticles Modified with Fluoroquinolones and Copper or Silver Species

Antibiotic resistance is a global problem and bacterial biofilms contribute to its development. In this context, this study aimed to perform the synthesis and characterization of seven materials based on silica mesoporous nanoparticles functionalized with three types of fluoroquinolones, along with Cu2+ or Ag+ species to evaluate the antibacterial properties against Staphylococcus aureus, Enterococcus faecalis, Escherichia coli, and Pseudomonas aeruginosa, including clinical and multi-drug-resistant strains of S. aureus and P. aeruginosa. In addition, in order to obtain an effective material to promote wound healing, a well-known proliferative agent, phenytoin sodium, was adsorbed onto one of the silver-functionalized materials. Furthermore, biofilm studies and the generation of reactive oxygen species (ROS) were also carried out to determine the antibacterial potential of the synthesized materials. In this sense, the Cu2+ materials showed antibacterial activity against S. aureus and E. coli, potentially due to increased ROS generation (up to 3 times), whereas the Ag+ materials exhibited a broader spectrum of activity, even inhibiting clinical strains of MRSA and P. aeruginosa. In particular, the Ag+ material with phenytoin sodium showed the ability to reduce biofilm development by up to 55% and inhibit bacterial growth in a "wound-like medium" by up to 89.33%.

New Nanostructured Materials Based on Mesoporous Silica Loaded with Ru(II)/Ru(III) Complexes with Anticancer and Antimicrobial Properties

A new series of nanostructured materials was obtained by functionalization of SBA-15 mesoporous silica with Ru(II) and Ru(III) complexes bearing Schiff base ligands derived from salicylaldehyde and various amines (1,2-diaminocyclohexane, 1,2-phenylenediamine, ethylenediamine, 1,3-diamino-2-propanol, N,N-dimethylethylenediamine, 2-aminomethyl-pyridine, and 2-(2-aminoethyl)-pyridine). The incorporation of ruthenium complexes into the porous structure of SBA-15 and the structural, morphological, and textural features of the resulting nanostructured materials were investigated by FTIR, XPS, TG/DTA, zeta potential, SEM, and N₂ physisorption. The ruthenium complex-loaded SBA-15 silica samples were tested against A549 lung tumor cells and MRC-5 normal lung fibroblasts. A dose-dependent effect was observed, with the highest antitumoral efficiency being recorded for the material containing [Ru(Salen)(PPh₃)Cl] (50%/90% decrease in the A549 cells' viability at a concentration of 70 μg/mL/200 μg/mL after 24 h incubation). The other hybrid materials have also shown good cytotoxicity against cancer cells, depending on the ligand included in the ruthenium complex. The antibacterial assay revealed an inhibitory effect for all samples, the most active being those containing [Ru(Salen)(PPh₃)Cl], [Ru(Saldiam)(PPh₃)Cl], and [Ru(Salaepy)(PPh₃)Cl], especially against Staphylococcus aureus and Enterococcus faecalis Gram-positive strains. In conclusion, these nanostructured hybrid materials could represent valuable tools for the development of multi-pharmacologically active compounds with antiproliferative, antibacterial, and antibiofilm activity.

Determination of the Effect of Wastewater on the Biological Activity of Mixtures of Fluoxetine and Its Metabolite Norfluoxetine with Nalidixic and Caffeic Acids with Use of E. coli Microbial Bioindicator Strains

In the present work, the conducted research concerned the determination of the toxicity and oxidative stress generation of the antidepressant fluoxetine (FLU), its metabolite nor-fluoxetine (Nor-FLU), the antibiotic nalidixic acid (NA), caffeic acid (CA) and their mixtures in three different environments: microbial medium (MM), raw wastewaters (RW) and treated wastewaters (TW). We evaluated the following parameters: E. coli cell viability, toxicity and protein damage, sodA promoter induction and ROS generation. It was found that FLU, Nor-FLU, NA, CA and their mixtures are toxic and they have the potency to generate oxidative stress in E. coli strains. We also detected that the wastewater, in comparison to the microbial medium, had an influence on the toxic activity and oxidative stress synthesis of the tested chemicals and their mixtures. Regardless of the environment under study, the strongest toxic activity and oxidative stress generation were detected after bacterial incubation with NA at a concentration of 1 mg/dm³ and the mixture of FLU (1 mg/dm³) with Nor-FLU (0.1 mg/dm³) and with NA (0.1 mg/dm³). The ROS synthesis and sodA promoter induction suggest that, in the case of the examined compounds and their mixtures, oxidative stress is the mechanism of toxicity. The analysis of the types of interactions among the substances constituting the mixtures in the wastewater revealed synergism, potentiation and antagonism.

Synthesis, characterization, and antibacterial activities of a heteroscorpionate derivative platinum complex against methicillin-resistant Staphylococcus aureus

Staphylococcus aureus is one of the species with the greatest clinical importance and greatest impact on public health. In fact, methicillin-resistant S. aureus (MRSA) is considered a pandemic pathogen, being essential to develop effective medicines and combat its rapid spread. This study aimed to foster the translation of clinical research outcomes based on metallodrugs into clinical practice for the treatment of MRSA. Bearing in mind the promising anti-Gram-positive effect of the heteroscorpionate ligand 1,1’-(2-(4-isopropylphenyl)ethane-1,1-diyl)bis(3,5-dimethyl-1H-pyrazole) (2P), we propose the coordination of this compound to platinum as a clinical strategy with the ultimate aim of overcoming resistance in the treatment of MRSA. Therefore, the novel metallodrug 2P-Pt were synthetized, fully characterized and its antibacterial effect against the planktonic and biofilm state of S. aureus evaluated. In this sense, three different strains of S. aureus were studied, one collection strain of S. aureus sensitive to methicillin and two clinical MRSA strains. To appraise the antibacterial activity, minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), minimum biofilm inhibitory concentration (MBIC), and minimum biofilm eradication concentration (MBEC) were determined. Moreover, successful outcomes on the development of biofilm in a wound-like medium were obtained. The mechanism of action for 2P-Pt was proposed by measuring the MIC and MBC with EDTA (cation mediated mechanism) and DMSO (exogenous oxidative stress mechanism). Moreover, to shed light on the plausible antistaphylococcal mechanism of this novel platinum agent, additional experiments using transmission electron microscopy were carried out. 2P-Pt inhibited the growth and eradicated the three strains evaluated in the planktonic state. Another point worth stressing is the inhibition in the growth of MRSA biofilm even in a wounded medium. The results of this work support this novel agent as a promising therapeutic alternative for preventing infections caused by MRSA.

Dual Anticancer and Antibacterial Properties of Silica-Based Theranostic Nanomaterials Functionalized with Coumarin343, Folic Acid and a Cytotoxic Organotin(IV) Metallodrug

Five different silica nanoparticles functionalized with vitamin B12, a derivative of coumarin found in green plants and a minimum content of an organotin(IV) fragment (1-MSN-Sn, 2-MSN-Sn, 2-SBA-Sn, 2-FSPm-Sn and 2-FSPs-Sn), were identified as excellent anticancer agents against triple negative breast cancer, one of the most diagnosed and aggressive cancerous tumors, with very poor prognosis. Notably, compound 2-MSN-Sn shows selectivity for cancer cells and excellent luminescent properties detectable by imaging techniques once internalized. The same compound is also able to interact with and nearly eradicate biofilms of Staphylococcus aureus, the most common bacteria isolated from chronic wounds and burns, whose treatment is a clinical challenge. 2-MSN-Sn is efficiently internalized by bacteria in a biofilm state and destroys the latter through reactive oxygen species (ROS) generation. Its internalization by bacteria was also efficiently monitored by fluorescence imaging. Since silica nanoparticles are particularly suitable for oral or topical administration, and considering both its anticancer and antibacterial activity, 2-MSN-Sn represents a new dual-condition theranostic agent, based primarily on natural products or their derivatives and with only a minimum amount of a novel metallodrug.

Mesoporous silica nanoparticles as carrier to overcome bacterial drug resistant barriers

Antibiotic resistance has become a global threat to health due to abuse of antibiotics. Lots of existing antibiotics have lost their effect on drug resistant bacteria. Moreover, the discovery of novel antibiotics becomes more and more difficult. It is necessary to develop new strategies to fight against antibiotic resistance. Nano-drug delivery systems endow old antibiotics with new vitality to defeat the antibiotic resistant barrier by protecting antibiotics against hydrolysis, increasing uptake and circumventing efflux pump. Among them, mesoporous silica nanoparticles (MSNs) are one of the most extensively investigated as carrier of antibiotics due to large drug loading capability, tunable physicochemical characteristics, and biocompatibility. MSNs can improve the delivery of antibiotics to bacteria greatly by reducing size, modifying surface, and regulating shapes. Furthermore, MSNs hybridized metal ions or metal nanoparticles exert stronger antibacterial effect by controlling the release of metal ions or increasing active oxygen species. In addition, metal capped MSNs are also able to load antibiotics to exert synergistic antibacterial effect. This paper firstly reviewed the current application of various nanomaterials as antibacterial agents, and then focused on the MSNs including the introduction of MSNs and various approaches for improving antibacterial effect of MSNs.

Biological Use of Nanostructured Silica-Based Materials Functionalized with Metallodrugs: The Spanish Perspective

Since the pioneering work of Vallet-Regí's group on the design and synthesis of mesoporous silica-based materials with therapeutic applications, during the last 15 years, the potential use of mesoporous silica nanostructured materials as drug delivery vehicles has been extensively explored. The versatility of these materials allows the design of a wide variety of platforms that can incorporate numerous agents of interest (fluorophores, proteins, drugs, etc.) in a single scaffold. However, the use of these systems loaded with metallodrugs as cytotoxic agents against different diseases and with distinct therapeutic targets has been studied to a much lesser extent. This review will focus on the work carried out in this field, highlighting both the pioneering and recent contributions of Spanish groups that have synthesized a wide variety of systems based on titanium, tin, ruthenium, copper and silver complexes supported onto nanostructured silica. In addition, this article will also discuss the importance of the structural features of the systems for evaluating and modulating their therapeutic properties. Finally, the most interesting results obtained in the study of the potential therapeutic application of these metallodrug-functionalized silica-based materials against cancer and bacteria will be described, paying special attention to preclinical trials in vivo.

Adsorptive Capacity, Inhibitory Activity and Processing Techniques for a Copper-MOF Based on the 3,4-Dihydroxybenzoate Ligand

Due to the fast, emerging development of antibiotic-resistant bacteria, the need for novel, efficient routes to battle these pathogens is crucial; in this scenario, metal-organic frameworks (MOFs) are promising materials for combating them effectively. Herein, a novel Cu-MOF-namely 1-that displays the formula [Cu₃L₂(DMF)₂]_n (DMF = N,N-dimethylformamide) is described, synthesized by the combination of copper(II) and 3,4-dihydroxybenzoic acid (H₃L)-both having well-known antibacterial properties. The resulting three-dimensional structure motivated us to study the antibacterial activity, adsorptive capacity and processability of the MOF in the form of pellets and membranes as a proof-of-concept to evaluate its future application in devices.

Effect of chain length on the cytotoxic activity of (alkyl-ω-ol)triphenyltin(IV) loaded into SBA-15 nanostructured silica and in vivo study of SBA-15~Cl|Ph3Sn(CH2)8OH

A series of nanostructured SBA-15-based materials functionalized with the tetraorganotin(IV) metallodrugs Ph₃Sn(CH₂)_nOH (n = 3, 4, 6, 8 and 11) are synthesized and structurally characterized by different techniques used in solid-state chemistry. The cytotoxicity of both the organotin(IV) compounds and the tin-functionalized SBA-15 materials are studied against different cancer cell lines observing that the materials have similar cytotoxic activity in comparison with the free organotin compounds in terms of mass. However, considering that the percentage of active metal compound loaded into material is low, the utilization of mesoporous silica as drug vehicle clearly improves the cytotoxic effectiveness of metal-based drugs against cancer cells. One of the most potent between all tested systems is material SBA-15~Cl|Ph₃Sn(CH₂)₈OH. Its cytotoxicity seems to come from additional mechanisms apart from apoptosis provoking cell reprogram in B16 melanoma into more mature and less aggressive phenotype. Moderated production of ROS/RNS is probably in the background of observed phenomenon. Obtained results are further confirmed in syngeneic mouse model of melanoma in C57BL6 mice. The in vivo results show that SBA-15 do not disturb tumor growth, while both Ph₃Sn(CH₂)₈OH and SBA-15~Cl|Ph₃Sn(CH₂)₈OH significantly decreases tumor volume with an enhancement of the antitumor potential of the tetraorganotin(IV) compound upon immobilization in SBA-15.

Overcoming Multidrug Resistance of Antibiotics via Nanodelivery Systems

Antibiotic resistance has become a threat to microbial therapies nowadays. The conventional approaches possess several limitations to combat microbial infections. Therefore, to overcome such complications, novel drug delivery systems have gained pharmaceutical scientists’ interest. Significant findings have validated the effectiveness of novel drug delivery systems such as polymeric nanoparticles, liposomes, metallic nanoparticles, dendrimers, and lipid-based nanoparticles against severe microbial infections and combating antimicrobial resistance. This review article comprises the specific mechanism of antibiotic resistance development in bacteria. In addition, the manuscript incorporated the advanced nanotechnological approaches with their mechanisms, including interaction with the bacterial cell wall, inhibition of biofilm formations, activation of innate and adaptive host immune response, generation of reactive oxygen species, and induction of intracellular effect to fight against antibiotic resistance. A section of this article demonstrated the findings related to the development of delivery systems. Lastly, the role of microfluidics in fighting antimicrobial resistance has been discussed. Overall, this review article is an amalgamation of various strategies to study the role of novel approaches and their mechanism to fight against the resistance developed to the antimicrobial therapies.

Antibacterial Activity of Colloidal Copper Nanoparticles against Gram-negative (Escherichia coli and Proteus vulgaris) Bacteria

Antibacterial activities of as-synthesized nanoparticles have gained attention in past few years due to rapid phylogenesis of pathogens developing multi-drug resistance (MDR). Antibacterial activity of Copper nanoparticles (CuNPs) on surrogate pathogenic Gram-negative bacteria Escherichia coli (MTCC No. 739) and Proteus vulgaris (MTCC No. 426) was evaluated under culture conditions. Three sets of colloidal CuNPs were synthesized by chemical reduction method with per batch yield of 0.2 g, 0.3 g and 0.4 g. As-synthesized CuNPs possess identical plasmonic properties and have similar hydrodynamic particle sizes (11-14 nm). Antibacterial activities of CuNPs were evaluated by MIC (minimum inhibitory concentration) and MBC (minimum bactericidal concentration) tests, cytoplasmic leakage and ROS (reactive oxygen species) assays. MIC and MBC tests revealed dose dependence bactericidal action. Growth curves of E. coli show faster growth inhibition along with higher cytoplasmic leakage than that of P. vulgaris. This might be because of increased membrane permeability of E. coli. CuNPs - microorganism interaction induces oxidative stress generated by ROS (reactive oxygen species). Leakage of cytoplasmic components, loss of membrane permeability and ROS generation are the primary causes of CuNPs induced bacterial cell death. As-synthesized CuNPs exhibiting promising antibacterial activities and could be a promising candidate for novel antibacterial agents.

Antimicrobials Functioning through ROS-Mediated Mechanisms: Current Insights

Antibiotic resistance and infections caused by multidrug-resistant bacteria are global health concerns. Reducing the overuse and misuse of antibiotics is the primary step toward minimizing the antibiotic resistance crisis. Thus, it is imperative to introduce and implement novel antimicrobial strategies. Recently, several alternative antimicrobials targeting oxidative stress in bacteria have been studied and shown to be promising. Oxidative stress occurs when bacterial cells fail to detoxify the excessive reactive oxygen species (ROS) accumulated in the cells. Bacteria deploy numerous defense mechanisms against oxidative stress. The oxidative stress response is not essential for the normal growth of bacteria, but it is crucial for their survival. This toxic oxidative stress is created by the host immune response or antimicrobials generating ROS. ROS possess strong oxidation potential and cause serious damage to nucleic acids, lipids, and proteins. Since ROS-based antimicrobials target multiple sites in bacteria, these antimicrobials have attracted the attention of several researchers. In this review, we present recent ROS-based alternative antimicrobials and strategies targeting oxidative stress which might help in mitigating the problem of antibiotic resistance and dissemination.

Innovative green/non-toxic Bi2S3@g-C3N4 nanosheets for dark antimicrobial activity and photocatalytic depollution: Turnover assessment

Herein, green and non-toxic bismuth sulphide@graphitic carbon nitride (Bi₂S₃@g-C₃N₄) nanosheets (NCs) were firstly synthesized by ultrasonicated-assisted method and characterized with different tool. Bi₂S₃@g-C₃N₄ NCs antimicrobial activity tested against three types of microbes. As well the heterostructured Bi₂S₃@g-C₃N₄ NCs was investigated for removing dye and hexavalent chromium under visible light and showed high efficiency of photocatalytic oxidation/reduction higher than g-C₃N₄ alone, attributing to lower recombination photogenerated electron-hole pairs. Bi₂S₃@g-C₃N₄ NCs showed high antimicrobial efficiencies against Staphylococcus aureus (S. aureus) as a Gram positive bacterium, Escherichia coli (E. Coli)as a Gram negative bacterium and Candida albicans (C. albicans) and that the disinfection rates are 99.97%, 99.98% and 99.92%, respectively. The core mechanism is that the bacterial membrane could be destroyed by reactive oxygen species. The Bi₂S₃@g-C₃N₄ NCs is promising for environmental disinfection including water and public facilities disinfection and solar photocatalytic depollution. Turnover number (TON) and Turnover frequency (TOF) are used as concise assessment indicator for photocatalytic efficiency.

Biocompatibility, cytotoxicity and antibacterial effects of meropenem-loaded mesoporous silica nanoparticles against carbapenem-resistant Enterobacteriaceae

BACKGROUND

The ever-increasing resistance to antimicrobial agents among bacteria associated with nosocomial infections indicate the necessity of new antimicrobial therapy. The nanoparticles are considered as new drug delivery systems to increase the efficiency and decrease the unfavourable effects of the antimicrobial agents.

METHODS

Herein we report the preparation and characterization of mesoporous silica nanoparticles (MSNs) loaded with meropenem against carbapenem-resistant Enterobacteriaceae. The antimicrobial effect of meropenem-loaded MSNs was determined against Enterobacteriaceae using the minimum inhibitory (MIC) method. The biocompatibility of meropenem-loaded MSNs was studied by the impact on the haemolysis and sedimentation rates of human red blood cells (HRBCs). Cytotoxicity of the meropenem-loaded MSNs was studied by the MTT test (hBM-MSC cell viability).

RESULTS

The meropenem-loaded MSNs have shown antibacterial activity on all isolates at different MIC values lower than MICs of meropenem. Free MSNs did not show any significant antibacterial effect. Meropenem-loaded MSNs have no significant effect on haemolysis and ESR of HRBCs. The viability of hBM-MSC cells treated with serial concentrations of meropenem-loaded MSNs was 92-100%.

CONCLUSION

Due to the desirable biocompatibility, low cytotoxicity and the improved antibacterial effect, MSNs can be considered as a promising drug delivery system for meropenem as a potential antimicrobial agent.

Improvement in the Pharmacological Profile of Copper Biological Active Complexes by Their Incorporation into Organic or Inorganic Matrix

Every year, more Cu(II) complexes are proven to be biologically active species, but very few are developed as drugs or entered in clinical trials. This is due to their poor water solubility and lipophilicity, low stability as well as in vivo inactivation. The possibility to improve their pharmacological and/or oral administration profile by incorporation into inorganic or organic matrix was studied. Most of them are either physically encapsulated or conjugated to the matrix via a moiety able to coordinate Cu(II). As a result, a large variety of species were developed as delivery carriers. The organic carriers include liposomes, synthetic or natural polymers or dendrimers, while the inorganic ones are based on carbon nanotubes, hydrotalcite and silica. Some hybrid organic-inorganic materials based on alginate-carbonate, gold-PEG and magnetic mesoporous silica-Schiff base were also developed for this purpose.

Dual Stimuli-Responsive Copper Nanoparticles Decorated SBA-15: A Highly Efficient Catalyst for the Oxidation of Alcohols in Water

In the present work, a temperature and pH-responsive hybrid catalytic system using copolymer-capped mesoporous silica particles with metal nanoparticles is proposed. The poly(2-(dimethylamino)ethyl methacrylate)(DMAEMA)-co-N-tert-butyl acrylamide) (TBA)) shell on mesoporous silica SBA-15 was obtained through free radical polymerization. Then, copper nanoparticles (CuNPs) decorated SBA-15/copolymer hybrid materials were synthesized using the NaBH₄ reduction method. SBA-15 was functionalized with trimethoxylsilylpropyl methacrylate (TMSPM) and named TSBA. It was found that the CuNPs were uniformly dispersed in the mesoporous channels of SBA-15, and the hybrid catalyst exhibited excellent catalytic performance for the selective oxidation of different substituted benzyl alcohols in water using H₂O₂ as an oxidant at room temperature. The dual (temperature and pH-) responsive behaviors of the CuNPs/p(DMAEMA-co-TBA)/TSBA catalyst were investigated using the dynamic light scattering technique. The conversion of catalytic products and selectivity were calculated using gas chromatographic techniques, whereas the molecular structure of the products was identified using ¹H and ¹³C nuclear magnetic resonance (NMR) spectroscopy. The catalyst showed excellent catalytic activity toward the oxidation of alcohol to aldehyde in an aqueous medium below the lower critical solution temperature (LCST) and pKa values (7–7.5) of the copolymer. The main advantages of the hybrid catalyst, as compared to the existing catalysts, are outstanding alcohol conversion (up to 99%) for a short reaction time (1 h), small amount of the catalyst (5 mg), and good recyclability equal to at least five times.

Synthesis, morphological analysis, antibacterial activity of iron oxide nanoparticles and the cytotoxic effect on lung cancer cell line

Focusing on the huge importance associated in developing functional materials, this research study describes the synthesis, characterization of morphology, bactericidal activity and cytotoxic effect of iron oxide nanoparticles (IONPs). IONPs have been successfully fabricated through thermal decomposition of a diiron(III) complex precursor. The morphology of the nanoparticle has been delineated with different spectroscopic and analytic methods. Scanning and transmission electron microscopy (FE-SEM and HR-TEM) analyses estimate the cross linked porous structure of IONPs with an average size ~97 nm. Dynamic light scattering (DLS) study of IONPs determines the hydrodynamic diameter as 104 nm. The cytotoxic behavior of IONPs has been examined against human lung cancer cell line (A549) through different fluorescence staining studies which ensure the mode of apoptosis for cell death of A549. Furthermore, measurement of reactive oxygen species suggests the destruction of mitochondrial membrane of Staphylococcus aureus, leading to effective bactericidal propensity which holds a good promise for IONPs to become a clinically approved antibacterial agent.

Nanocopper-loaded Black phosphorus nanocomposites for efficient synergistic antibacterial application

Novel nanocopper-loaded black phosphorus (BP/Cu) nanocomposites were synthesized to synergistically exert enhanced antibacterial activities aimed at reducing antibiotics abuse. First, both BP and Cu display low biotoxicity, broadening their application in the microbiological field. Second, the unique electronic properties of BP enable BP/Cu nanocomposites to amplify antibacterial effects via interfacial charge transfer, resulting in a surge of reactive oxygen species (ROS). Third, BP/Cu nanocomposites are relatively stable, which helps to avoid the problem that nanocopper alone is highly oxidized. Finally, BP/Cu was synthesized in an environmentally-friendly manner by a one-step reduction method. The BP/Cu nanocomposites were characterized by transmission electron microscopy and atomic force microscopy. Their antibacterial properties were investigated comprehensively and discussed in detail by inhibition zone assays, dynamic growth curves, membrane potential assays, and live/dead baclight bacterial viability assays, all of which revealed the antimicrobial activities of BP/Cu nanocomposites. Absorption spectra were measured to determine which ROS species were responsible for the bactericidal mechanisms. In summary, our results demonstrated the potential of nanocomposites based on BP in antibacterial therapy due to its excellent electronic properties and outstanding biological performance. This will pave the way for avoiding antibiotic overuse and for providing security to humans and the environment.

Role of Folic Acid in the Therapeutic Action of Nanostructured Porous Silica Functionalized with Organotin(IV) Compounds Against Different Cancer Cell Lines

The synthesis, characterization and cytotoxic activity against different cancer cell lines of various mesoporous silica-based materials containing folate targeting moieties and a cytotoxic fragment based on a triphenyltin(IV) derivative have been studied. Two different mesoporous nanostructured silica systems have been used: firstly, micronic silica particles of the MSU-2 type and, secondly, mesoporous silica nanoparticles (MSNs) of about 80 nm. Both series of materials have been characterized by different methods, such as powder X-ray diffraction, X-ray fluorescence, absorption spectroscopy and microscopy. In addition, these systems have been tested against four different cancer cell lines, namely, OVCAR-3, DLD-1, A2780 and A431, in order to observe if the size of the silica-based systems and the quantity of incorporated folic acid influence their cytotoxic action. The results show that the materials are more active when the quantity of folic acid is higher, especially in those cells that overexpress folate receptors such as OVCAR-3 and DLD-1. In addition, the study of the potential modulation of the soluble folate receptor alpha (FOLR1) by treatment with the synthesized materials has been carried out using OVCAR-3, DLD-1, A2780 and A431 tumour cell lines. The results show that a relatively high concentration of folic acid functionalization of the nanostructured silica together with the incorporation of the cytotoxic tin fragment leads to an increase in the quantity of the soluble FOLR1 secreted by the tumour cells. In addition, the studies reported here show that this increase of the soluble FOLR1 occurs presumably by cutting the glycosyl-phosphatidylinositol anchor of membrane FR-α and by the release of intracellular FR-α. This study validates the potential use of a combination of mesoporous silica materials co-functionalized with folate targeting molecules and an organotin(IV) drug as a strategy for the therapeutic treatment of several cancer cells overexpressing folate receptors.

Copper-functionalized nanostructured silica-based systems: Study of the antimicrobial applications and ROS generation against gram positive and gram negative bacteria

A series of copper-functionalized SBA-15 (Santa Barbara Amorphous) materials containing the ligands triethoxysilylpropylmaleamic acid (maleamic) or triethoxy-3-(2-imidazolin-1-yl)propylsilane (imidazoline) have been prepared. The nanostructured silica-based systems SBA-maleamic, SBA-imidazoline, SBA-maleamic-Cu and SBA-imidazoline-Cu were characterized by several methods observing that the functionalization took place mainly inside the pores of the mesoporous system. The antimicrobial behaviour of the synthesized materials against Staphylococcus aureus and Escherichia coli was tested observing a very potent activity of the copper-functionalized systems (minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) values for SBA-maleamic-Cu of ca. 31.25 μg/mL, which correspond with ca. 1.13 μg/mL of Cu). A study of the oxidative stress promoted by the synthesized materials showed that the SBA-maleamic-Cu and the SBA-imidazoline-Cu were able to increase the reactive oxygen species (ROS) production in S. aureus by 427% and 373%, respectively, while this increase was slightly lower in E. coli (387 and 324%, respectively). Furthermore, an electrochemical study was carried out in order to determine if these materials interact with lysine or alanine to validate a potential antimicrobial mechanism based on the inhibition of the synthesis of the peptidoglycan of the bacterial wall. Finally, these studies were also performed to determine the potential interaction of the copper-containing materials with glutathione in order to assess if they are able to perturb the metabolism of this tripeptide.

Enlarged Pore Size Chiral Mesoporous Silica Nanoparticles Loaded Poorly Water-Soluble Drug Perform Superior Delivery Effect

Large mesopores of chiral silica nanoparticles applied as drug carrier are worth studying. In this study, chiral mesoporous silica nanoparticles (CMSN) and enlarged chiral mesoporous silica nanoparticles (E-CMSN) with a particle size from 200 to 300 nm were synthesized. Fourier transform infrared spectrometer (FTIR), circular dichroism spectrum, scanning electron microscopy (SEM), transmission electron microscope (TEM), and nitrogen adsorption/desorption measurement were adopted to explore their characteristics. The results showed that the surface area, pore volume, and pore diameter of E-CMSN were higher than those of CMSN due to enlarged mesopores. Poorly water-soluble drug nimesulide (NMS) was taken as the model drug and loaded into carriers using adsorption method. After NMS was loaded into CMSN and E-CMSN, most crystalline NMS converted to amorphous phase and E-CMSN was superior. The anti-inflammatory pharmacodynamics and in vivo pharmacokinetics results were consistent with the wetting property and in vitro drug dissolution results, verifying that NMS/E-CMSN exhibited superior NMS delivery system based on its higher oral relative bioavailability and anti-inflammatory effect because its enlarge mesopores contributed to load and release more amorphous NMS. The minor variations in the synthesis process contributed to optimize the chiral nano-silica drug delivery system.

Mesoporous Silica-Based Materials with Bactericidal Properties

Bacterial infections are the main cause of chronic infections and even mortality. In fact, due to extensive use of antibiotics and, then, emergence of antibiotic resistance, treatment of such infections by conventional antibiotics has become a major concern worldwide. One of the promising strategies to treat infection diseases is the use of nanomaterials. Among them, mesoporous silica materials (MSMs) have attracted burgeoning attention due to high surface area, tunable pore/particle size, and easy surface functionalization. This review discusses how one can exploit capacities of MSMs to design and fabricate multifunctional/controllable drug delivery systems (DDSs) to combat bacterial infections. At first, the emergency of bacterial and biofilm resistance toward conventional antimicrobials is described and then how nanoparticles exert their toxic effects upon pathogenic cells is discussed. Next, the main aspects of MSMs (e.g., physicochemical properties, multifunctionality, and biosafety) which one should consider in the design of MSM-based DDSs against bacterial infections are introduced. Finally, a comprehensive analysis of all the papers published dealing with the use of MSMs for delivery of antibacterial chemicals (antimicrobial agents functionalized/adsorbed on mesoporous silica (MS), MS-loaded with antimicrobial agents, gated MS-loaded with antimicrobial agents, MS with metal-based nanoparticles, and MS-loaded with metal ions) is provided.