Curcumin In Situ Gelling Polymeric Insert with Enhanced Ocular Performance

Physical and mechanical properties of ocular thin films: a systematic review and meta-analysis

The ocular thin film presents a potential solution for addressing challenges to ocular drug delivery. In this review, we summarise the findings of a comprehensive review analysing 336 formulations from 68 studies. We investigated the physical and mechanical properties of ocular thin films, categorised into natural polymer-based, synthetic polymer-based, and combined polymer films. The results showed that the type of polymers used impacted mucoadhesion force, moisture absorption:moisture loss ratio, pH, swelling index, and elongation percentage. Significant relationships were found between these properties within each subgroup. The results also highlighted the influence of plasticisers on elongation percentage, mucoadhesion force, swelling index, and moisture absorption:moisture loss ratio. These findings have implications for designing and optimising ocular drug formulations and selecting appropriate plasticisers to achieve formulations with the desired properties.

Exploring the Ocular Absorption Pathway of Fasudil Hydrochloride towards Developing a Nanoparticulate Formulation with Improved Performance

Rho-kinase (ROCK) inhibitors represent a new category of anti-glaucoma medications. Among them, Fasudil hydrochloride, a selective ROCK inhibitor, has demonstrated promising outcomes in glaucoma treatment. It works by inhibiting the ROCK pathway, which plays a crucial role in regulating the trabecular meshwork and canal of Schlemm's aqueous humor outflow. This study aims to investigate the ocular absorption pathway of Fasudil hydrochloride and, subsequently, develop a nanoparticle-based delivery system for enhanced corneal absorption. Employing the ionic gelation method and statistical experimental design, the factors influencing chitosan nanoparticle (Cs NP) characteristics and performance were explored. Fasudil in vitro release and ex vivo permeation studies were performed, and Cs NP ocular tolerability and cytotoxicity on human lens epithelial cells were evaluated. Permeation studies on excised bovine eyes revealed significantly higher Fasudil permeation through the sclera compared to the cornea (370.0 μg/cm2 vs. 96.8 μg/cm2, respectively). The nanoparticle size (144.0 ± 15.6 nm to 835.9 ± 23.4 nm) and entrapment efficiency range achieved (17.2% to 41.4%) were predominantly influenced by chitosan quantity. Cs NPs showed a substantial improvement in the permeation of Fasudil via the cornea, along with slower release compared to the Fasudil aqueous solution. The results from the Hen's Egg Test Chorioallantoic Membrane (HET-CAM) and Bovine Corneal Opacity and Permeability (BCOP) tests indicated good conjunctival and corneal biocompatibility of the formulated chitosan nanoparticles, respectively. Lens epithelial cells displayed excellent tolerance to low concentrations of these nanoparticles (>94% cell viability). To the best of our knowledge, this is the first report on the ocular absorption pathway of topically applied Fasudil hydrochloride where the cornea has been identified as a potential barrier that could be overcome using Cs NPs.

Characterization and Bio-Evaluation of the Synergistic Effect of Simvastatin and Folic Acid as Wound Dressings on the Healing Process

Wound healing is a significant healthcare problem that decreases the patient's quality of life. Hence, several agents and approaches have been widely used to help accelerate wound healing. The challenge is to search for a topical delivery system that could supply long-acting effects, accurate doses, and rapid healing activity. Topical forms of simvastatin (SMV) are beneficial in wound care. This study aimed to develop a novel topical chitosan-based platform of SMV with folic acid (FA) for wound healing. Moreover, the synergistic effect of combinations was determined in an excisional wound model in rats. The prepared SMV-FA-loaded films (SMV-FAPFs) were examined for their physicochemical characterizations and morphology. Box-Behnken Design and response surface methodology were used to evaluate the tensile strength and release characteristics of the prepared SMV-FAPFs. Additionally, Fourier transform infrared (FT-IR), differential scanning calorimetry (DSC), X-ray diffraction pattern (XRD), and animal studies were also investigated. The developed SMV-FAPFs showed a contraction of up to 80% decrease in the wound size after ten days. The results of the quantitative real-time polymerase chain reaction (RT-PCR) analysis demonstrated a significant upregulation of dermal collagen type I (CoTI) expression and downregulation of the inflammatory JAK3 expression in wounds treated with SMV-FAPFs when compared to control samples and individual drug treatments. In summary, it can be concluded that the utilization of SMV-FAPFs holds great potential for facilitating efficient and expeditious wound healing, hence presenting a feasible substitute for conventional topical administration methods.

Enhancing Therapeutic Efficacy of Curcumin: Advances in Delivery Systems and Clinical Applications

Curcumin, a potent active compound found in turmeric and Curcuma xanthorrhiza oil, possesses a wide range of therapeutic properties, including antibacterial, anti-inflammatory, antioxidant, and wound healing activities. However, its clinical effectiveness is hindered by its low bioavailability and rapid elimination from the body. To overcome these limitations, researchers have explored innovative delivery systems for curcumin. Some promising approaches include solid lipid nanoparticles, nanomicelle gels, and transdermal formulations for topical drug delivery. In the field of dentistry, curcumin gels have shown effectiveness against oral disorders and periodontal diseases. Moreover, Pickering emulsions and floating in situ gelling systems have been developed to target gastrointestinal health. Furthermore, curcumin-based systems have demonstrated potential in wound healing and ocular medicine. In addition to its therapeutic applications, curcumin also finds use as a food dye, contraception aid, corrosion-resistant coating, and environmentally friendly stain. This paper primarily focuses on the development of gel compositions of curcumin to address the challenges associated with its clinical use.

Recent Advances of Ocular Drug Delivery Systems: Prominence of Ocular Implants for Chronic Eye Diseases

Chronic ocular diseases can seriously impact the eyes and could potentially result in blindness or serious vision loss. According to the most recent data from the WHO, there are more than 2 billion visually impaired people in the world. Therefore, it is pivotal to develop more sophisticated, long-acting drug delivery systems/devices to treat chronic eye conditions. This review covers several drug delivery nanocarriers that can control chronic eye disorders non-invasively. However, most of the developed nanocarriers are still in preclinical or clinical stages. Long-acting drug delivery systems, such as inserts and implants, constitute the majority of the clinically used methods for the treatment of chronic eye diseases due to their steady state release, persistent therapeutic activity, and ability to bypass most ocular barriers. However, implants are considered invasive drug delivery technologies, especially those that are nonbiodegradable. Furthermore, in vitro characterization approaches, although useful, are limited in mimicking or truly representing the in vivo environment. This review focuses on long-acting drug delivery systems (LADDS), particularly implantable drug delivery systems (IDDS), their formulation, methods of characterization, and clinical application for the treatment of eye diseases.

PLGA nanoparticles loaded with curcumin produced luminescence for cell bioimaging

To revise the emission of curcumin (Cur) from "off" to "on", poly (D, L-lactide-co-glycolide) acid (PLGA) nanoparticles loaded with Cur were embedded in a polyvinyl alcohol (PVA) emulsifier (named Cur@PLGA-NPs). First, the emission intensities of different nanoformulations, including liposomes, bovine serum albumin (BSA) nanoparticles, and PLGA nanoparticles, were examined to discover the most effective carriers for Cur luminescence. As a result, Cur@PLGA-NPs exhibited the highest fluorescence intensity due to aggregation-induced emission (AIE), with quantum yields of 23.78% in aqueous solution and 21.52% in the solid state. According to X-ray diffraction (XRD) data, Cur@PLGA-NPs existed in the amorphous state, with a size of 217.2 ± 5.2 nm, an encapsulation efficiency (EE) of 69.98%, and a drug loading efficiency (LE) of 1.37%. The intramolecular interactions, which included hydrophobic interactions, electrostatic interactions, π-π interactions and solvatochromic effects, stabilized the chromophore cluster of Cur@PLGA-NPs in terms of nanoparticle formulation. Compared with free Cur, Cur@PLGA-NPs sensitized CT26 cells more efficiently with an IC₅₀ value of 16.9 μmol/L and an apoptotic rate of 17.20% at 10 μmol/L Cur. Because of the robust fluorescence emission based on AIE, Cur@PLGA-NPs were utilized as a nano-AIE probe for cell bioimaging, and many red fluorescent signals were observed in CT26 cells after treatment. These results suggest that Cur@PLGA-NPs provide a novel amorphous AIE formulation with imaging and bioactive capabilities.

A Novel Curcumin Arginine Salt: A Solution for Poor Solubility and Potential Anticancer Activities

Curcumin is a natural polyphenolic compound with well-known anticancer properties. Poor solubility and permeability hamper its use as an anticancer pharmaceutical product. In this study, L-arginine, a basic amino acid and a small hydrophilic molecule, was utilized to form a salt with the weak acid curcumin to enhance its solubility and potentiate the anticancer activities of curcumin. Two methods were adopted for the preparation of curcumin: L-arginine salt, namely, physical mixing and coprecipitation. The ion pair or salt was characterized for docking, solubility, DSC, FTIR, XRD, in vitro dissolution, and anticancer activities using MCF7 cell lines. The molecular docking suggested a salt/ion-pair complex between curcumin and L-arginine. Curcumin solubility was increased 335- and 440-fold by curcumin in L-arginine, physical, and co-precipitated mixtures, respectively. Thermal and spectral analyses supported the molecular docking and formation of a salt/ion pair between curcumin and L-arginine. The cytotoxicity of curcumin L-arginine salt significantly improved (p < 0.05) by 1.4-fold, as evidenced by the calculated IC50%, which was comparable to Taxol (the standard anticancer drug but with common side effects).

Polymeric/Dextran Wafer Dressings as Promising Long-Acting Delivery Systems for Curcumin Topical Delivery and Enhancing Wound Healing in Male Wistar Albino Rats

Curcumin is the main active constituent in turmeric, and it is one of the biopolyphenolic compounds. A cumulative body of research supports the use of curcumin in the treatment of wounds, yet poor water solubility and lack of therapeutic dose determination hamper its use for this therapeutic purpose. This work aimed at preparing novel curcumin wafer dressings to provide a favorable environment for wound healing. Hybrid synthetic (PVA, PVP, HPMC, and CMC) and biodegradable (sodium alginate and dextran) polymers were employed to prepare wafer dressings loaded with incremental three doses (2, 10, and 20 mg) of curcumin per a wafer dressing. The solvent casting method was used to prepare the dressings. Dimension, surface pH, mechanical properties, DSC, FTIR, XRD, erosion time, and in vitro release were studied. Skin wound healing assay was studied in Wistar albino rats. Six curcumin-loaded wafers were successfully prepared with good mechanical properties. Curcumin was dispersed in an amorphous/molecular form, as evidenced by thermal (DSC) and spectral (FTIR and XRD) analyses. Prolonged curcumin release (>24 h) was recorded for F6 (10 mg curcumin) and F7 (20 mg curcumin). Wound healing rate constants and time for 50% wound closure (T1/2) were estimated from a semi-log wound diameter versus time curve. A superior healing rate (up to 3-fold faster) was recorded for curcumin-loaded wafer dressings containing 10 mg (F6) with T1/2 of 7 days compared to 20 days for the placebo-treated group. These results warrant using the selected curcumin-loaded wafer dressing for safer and faster wound closure.

Mucoadhesive brinzolamide-loaded nanofibers for alternative glaucoma treatment

Despite the advances in the field of pharmaceutical materials and technology, topical administration remains a method of choice for the treatment of eye diseases such as glaucoma, with eye drops being a leading dosage form. Their main disadvantage is a very short drug residence time and thus poor drug bioavailability, leading to the necessity of continuous repeated dosing. Mucoadhesive electrospun nanofibers are promising candidates for overcoming these challenges, while still benefiting from topical ocular administration. As an alternative for eye drops, a nanofibrous drug delivery system (DDS) for the delivery of brinzolamide (BRZ), based on β-cyclodextrin (β-CD), hydroxypropyl cellulose (HPC) and polycaprolactone (PCL), was designed. The results showed β-CD/BRZ guest-host interactions, successful drug incorporation into the nanofibers, and the possibility of more accurate dosing in comparison with the control eye drops. Drug permeation through sheep corneas was almost linear in time, achieving therapeutic concentrations in the receptor medium, and mucoadhesion to sheep eye mucosa was relatively high in case of formulations with high HPC content. All formulations were biocompatible, their mechanical properties were sufficient to handle them without caution and UV irradiation was suitable to reduce bioburden of the fibers matrix, yet no antibacterial properties of BRZ were observed.

Glycation-induced age-related illnesses, antiglycation and drug delivery strategies

OBJECTIVES

Ageing is a major cause of multiple age-related diseases. Several mechanisms have been reported to contribute to these abnormalities including glycation, oxidative stress, the polyol pathway and osmotic stress. Glycation, unlike glycosylation, is an irregular biochemical reaction to the formation of active advanced glycation end-products (AGEs), which are considered to be one of the causes of these chronic diseases. This study provides a recent and comprehensive review on the possible causes, mechanisms, types, analytical techniques, diseases and treatments of the toxic glycation end products.

KEY FINDINGS

Several mechanisms have been found to play a role in generating hyperglycaemia-induced oxidative stress including an increase in the levels of reactive oxygen species (ROS), increase in the levels of AGEs, binding of AGEs and their receptors (RAGE) and the polyol pathway and thus have been investigated as promising novel targets.

SUMMARY

This review focuses on the key mechanisms attributed to cumulative increases of glycation and pathological RAGE expression as a significant cause of multiple age-related diseases, and reporting on different aspects of antiglycation therapy as a novel approach to managing/treating age-related diseases. Additionally, historical, current and possible future antiglycation approaches will be presented focussing on novel drug delivery methods.

Pharmaceutical, Biomedical and Ophthalmic Applications of Biodegradable Polymers (BDPs): Literature and Patent Review

In the last few decades, the interest in biodegradable materials for biomedical applications has increased significantly. Both natural and synthetic biodegradable polymers (BDPs) have been broadly explored for various biomedical applications. These include sutures and wound dressings, screws for bone fracture, scaffolds in tissue engineering, implants, and other carriers for targeted and sustained release drug delivery. Owing to their unique characteristics, including their surface charge variable copolymer block and composition and film-forming properties, BDPs have been widely used as favourable materials for ophthalmic drug delivery. Mucoadhesive BDPs have been used in ophthalmic formulations to prolong drug retention time and improve bioavailability, allowing ophthalmic controlled release systems to design. Furthermore, BDPs-based implants, microneedles, and injectable nano- and micro-particles enabled ocular posterior segment targeting and, most importantly, circumvented the need for removing the delivery systems after application. This review outlines the major advances of BDPs and highlights the latest progress of employing natural and synthetic BDPs for various biomedical applications, emphasising the treatment and management of ophthalmic conditions.

Vardenafil Oral Dispersible Films (ODFs) with Advanced Dissolution, Palatability, and Bioavailability

Oral, quick response, and on demand, also known as a spontaneous oral treatment for erectile dysfunction, is highly needed by both patients and physicians. Vardenafil is selective (fewer side effects) and more effective in difficult-to-treat conditions than sildenafil. This study aims at fostering the dual objectives of using biomolecules such as artificial sweetening agents to solubilize and mask the bitterness of vardenafil loaded on biodegradable polymeric materials (PVA, MC, SA, and PVP K30) to fabricate oral, fast-dissolving films (vardenafil ODFs) in the mouth without the need for water to ingest the dosage form. Furthermore, coprecipitated-dispersed mixtures of vardenafil and three sweeteners (sorbitol, acesulfame K, and sucralose) were prepared and characterized using FTIR, DSC, and solubility studies. Moreover, eight different vardenafil ODFs were prepared using the solvent-casting method. Modified gustatory sensation test, in vitro disintegration, and release studies were performed. In addition, the optimized ODF (F8) was compared with the commercial film-coated tablets pharmacokinetically (relative bioavailability, onset, and duration of actions were estimated). The results indicated that the three sweetening agents had comparable solubilizing capacity. However, both sucralose- and acesulfame K-based ODFs have a more enhanced sweet and palatable taste than sorbitol-sweetened ODF. The SA- and PVP K30-based ODFs showed significantly faster disintegration times and release rates than MC. In conclusion, PVA has good film-forming properties, but a higher ratio of PVA adversely affected the disintegration and release characteristics. The % relative bioavailability for ODF was 126.5%, with a superior absorption rate constant (Ka) of 1.2-fold. The C_max and estimated T_max were compared to conventional film-coated tablets.

Hybrid thermosensitive-mucoadhesive in situ forming gels for enhanced corneal wound healing effect of L-carnosine

Purpose

Thermosensitive in situ gels have been around for decades but only a few have been translated into ophthalmic pharmaceuticals. The aim of this study was to combine the thermo-gelling polymer poloxamer 407 and mucoadhesive polymers chitosan (CS) and methyl cellulose (MC) for developing effective and long-acting ophthalmic delivery systems for L-carnosine (a natural dipeptide drug) for corneal wound healing.

Methods

The effect of different polymer combinations on parameters like gelation time and temperature, rheological properties, texture, spreading coefficients, mucoadhesion, conjunctival irritation potential, in vitro release, and ex vivo permeation were studied. Healing of corneal epithelium ulcers was investigated in a rabbit’s eye model.

Results

Both gelation time and temperature were significantly dependent on the concentrations of poloxamer 407 and additive polymers (chitosan and methyl cellulose), where it ranged from <10 s to several minutes. Mechanical properties investigated through texture analysis (hardness, adhesiveness, and cohesiveness) were dependent on composition. Promising spreading-ability, mucoadhesion, transcorneal permeation of L-carnosine, high ocular tolerability, and enhanced corneal epithelium wound healing were recorded for poloxamer 407/chitosan systems.

Conclusion

In situ gelling systems comprising combinations of poloxamer-chitosan exhibited superior gelation time and temperature, mucoadhesion, and rheological characteristics suitable for effective long-acting drug delivery systems for corneal wounds.

Microneedle-based ocular drug delivery systems - recent advances and challenges

Eye diseases and injuries constitute a significant clinical problem worldwide. Safe and effective delivery of drugs to the eye is challenging mostly due to the presence of ocular barriers and clearance mechanisms. In everyday practice, the traditional eye drops, gels and ointments are most often used. Unfortunately, they are usually not well tolerated by patients due to the need for frequent use as well as the discomfort during application. Therefore, novel drug delivery systems with improved biopharmaceutical properties are a subject of ongoing scientific investigations. Due to the developments in microtechnology, in recent years, there has been a remarkable advance in the development of microneedle-based systems as an alternative, non-invasive form for administering drugs to the eye. This review summarizes the latest achievements in the field of obtaining microneedle ocular patches. In the manuscript, the most important manufacturing technologies, microneedle classification, and the research studies related to ophthalmic application of microneedles are presented. Finally, the most important advantages and drawbacks, as well as potential challenges related to the unique anatomy and physiology of the eye are summarized and discussed.

A Systematic Review of Drug-Loaded Electrospun Nanofiber-Based Ophthalmic Inserts

Currently, ocular inserts and nanoparticles have received much attention due to the limited bioavailability of conventional eye preparations and the toxicity problems of systemic drug administration. The current systematic review aims to present recent studies on the use of electrospun nanofiber-based ocular inserts to improve the bioavailability of drugs used for different ophthalmic diseases. A systematic search was performed in PubMed, Ovid Medline, Web of Science, ScienceDirect, Scopus, Reaxys, Google Scholar, and Google Patents/Espacenet taking "drug-loaded", "nanofibers", and "ophthalmic inserts" and their equivalent terms as keywords. The search was limited to original and peer-reviewed studies published in 2011-2021 in English language. Only 13 out of 795 articles and 15 out of 197 patents were included. All results revealed the success of nanofiber-based ocular inserts in targeting and improved bioavailability. Ocular inserts based on nanofibers can be used as safe, efficient carriers for the treatment of anterior and posterior eye diseases.

Polymeric long-acting drug delivery systems (LADDS) for treatment of chronic diseases: Inserts, patches, wafers, and implants

Non-oral long-acting drug delivery systems (LADDS) encompass a range of technologies for precisely delivering drug molecules into target tissues either through the systemic circulation or via localized injections for treating chronic diseases like diabetes, cancer, and brain disorders as well as for age-related eye diseases. LADDS have been shown to prolong drug release from 24 h up to 3 years depending on characteristics of the drug and delivery system. LADDS can offer potentially safer, more effective, and patient friendly treatment options compared to more invasive modes of drug administration such as repeated injections or minor surgical intervention. Whilst there is no single technology or definition that can comprehensively embrace LADDS; for the purposes of this review, these systems include solid implants, inserts, transdermal patches, wafers and in situ forming delivery systems. This review covers common chronic illnesses, where candidate drugs have been incorporated into LADDS, examples of marketed long-acting pharmaceuticals, as well as newly emerging technologies, used in the fabrication of LADDS.