1
|
Yan L, Lu G, Abdalkarim SYH, Wang L, Chen Z, Lu W, Yu HY. Multiple noncovalent interactions tailored crystallization and performance reinforcement mechanisms of Biopolyester Composites with functional Cellulose Nanocrystals. Int J Biol Macromol 2024; 255:128264. [PMID: 37984582 DOI: 10.1016/j.ijbiomac.2023.128264] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/06/2023] [Revised: 11/08/2023] [Accepted: 11/17/2023] [Indexed: 11/22/2023]
Abstract
The slow crystallization and weak mechanical features of poly (butylene adipate-co-terephthalate) (PBAT) have become a severe industrial problem in food packaging. Inspired by principle of bionic structure, functional cellulose nanocrystals (CNC) modified with hexamethylene diisocyanate (HMDI) and toluene diisocyanate (TDI) can enhance the crystallization ability and mechanical properties of PBAT nanocomposites. Significantly, CNC-T (CNC modified by TDI) showed a stronger reinforced effect on PBAT properties than unmodified CNCs and CNC-H (CNC modified by HMDI) nanofillers due to hydrogen bonds, π-π interaction between PBAT matrix and CNC-T nanofillers with benzene ring structure. Thus, compared with pure PBAT, PBAT/5CNC-T composites displayed an enhancement of 34.5 % on the tensile strength and exhibited the most robust nucleation ability on PBAT crystallization than CNC and CNC-H. Meanwhile, the possible nucleation, crystallization, and performance reinforcement mechanisms of PBAT nanocomposites have been presented, which is very beneficial for designing robust PBAT nanocomposites with functional cellulose nanocrystals for potential green packaging.
Collapse
Affiliation(s)
- Ling Yan
- Key Laboratory of Intelligent Textile and Flexible Interconnection of Zhejiang Province, Zhejiang Sci-Tech University, Hangzhou 310018, China
| | - Gaojun Lu
- Key Laboratory of Intelligent Textile and Flexible Interconnection of Zhejiang Province, Zhejiang Sci-Tech University, Hangzhou 310018, China
| | - Somia Yassin Hussain Abdalkarim
- Key Laboratory of Intelligent Textile and Flexible Interconnection of Zhejiang Province, Zhejiang Sci-Tech University, Hangzhou 310018, China
| | - Lunhe Wang
- Zhejiang Hisun Biomaterials Co., Ltd., Taizhou Bay New Area 188, Taizhou 318099, China
| | - Zhiming Chen
- Zhejiang Hisun Biomaterials Co., Ltd., Taizhou Bay New Area 188, Taizhou 318099, China
| | - Weidong Lu
- Hangzhou Xin Guang Plastics Co., Ltd., Hangzhou 310018, China
| | - Hou-Yong Yu
- Key Laboratory of Intelligent Textile and Flexible Interconnection of Zhejiang Province, Zhejiang Sci-Tech University, Hangzhou 310018, China.
| |
Collapse
|
2
|
Yadav C, Lee JM, Mohanty P, Li X, Jang WD. Graft onto approaches for nanocellulose-based advanced functional materials. NANOSCALE 2023; 15:15108-15145. [PMID: 37712254 DOI: 10.1039/d3nr03087c] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/16/2023]
Abstract
The resurgence of cellulose as nano-dimensional 'nanocellulose' has unlocked a sustainable bioeconomy for the development of advanced functional biomaterials. Bestowed with multifunctional attributes, such as renewability and abundance of its source, biodegradability, biocompatibility, superior mechanical, optical, and rheological properties, tunable self-assembly and surface chemistry, nanocellulose presents exclusive opportunities for a wide range of novel applications. However, to alleviate its intrinsic hydrophilicity-related constraints surface functionalization is inevitably needed to foster various targeted applications. The abundant surface hydroxyl groups on nanocellulose offer opportunities for grafting small molecules or macromolecular entities using either a 'graft onto' or 'graft from' approach, resulting in materials with distinctive functionalities. Most of the reviews published to date extensively discussed 'graft from' modification approaches, however 'graft onto' approaches are not well discussed. Hence, this review aims to provide a comprehensive summary of 'graft onto' approaches. Furthermore, insight into some of the recently emerging applications of this grafted nanocellulose including advanced nanocomposite formulation, stimuli-responsive materials, bioimaging, sensing, biomedicine, packaging, and wastewater treatment has also been reviewed.
Collapse
Affiliation(s)
- Chandravati Yadav
- Department of Chemistry, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, 03722 Seoul, Republic of Korea.
| | - Jeong-Min Lee
- Department of Chemistry, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, 03722 Seoul, Republic of Korea.
| | - Paritosh Mohanty
- Functional Materials Laboratory, Department of Chemistry, IIT Roorkee, Roorkee 247667, Uttarakhand, India
| | - Xinping Li
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science & Technology, Xi'an, Shaanxi 710021, PR China
| | - Woo-Dong Jang
- Department of Chemistry, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, 03722 Seoul, Republic of Korea.
| |
Collapse
|
3
|
Abushammala H, Mao J. Novel Electrically Conductive Cellulose Nanocrystals with a Core-Shell Nanostructure Towards Biodegradable Electronics. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:782. [PMID: 36839149 PMCID: PMC9963035 DOI: 10.3390/nano13040782] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 01/25/2023] [Revised: 02/05/2023] [Accepted: 02/17/2023] [Indexed: 06/18/2023]
Abstract
Electronic waste (e-waste) is the fastest growing waste stream and its negative impact on the environment and human health is major because of the toxicity and non-biodegradability of its constituents. For their biodegradability and nontoxicity, bio-based materials have been proposed as potential material candidates in the field of electronics. Among these, cellulose nanocrystals (CNCs) have many interesting properties including biodegradability, high mechanical strength, and possibility to functionalize. In terms of electrical properties, CNCs are electrically insulated, limiting their potential in electronics. This work aims to build up a poly(o-toluidine)-like shell around the CNCs to render them conductive. For this goal, the surface of the CNCs was carbamated using 2,4-toluene diisocyanate through the para-isocyanates and the ortho-isocyanates were later hydrolyzed to amine groups using HCl-acidified dimethylsulfoxide. The resultant o-toluidine-like molecules on the CNC surface were then polymerized using ammonium persulfate to form an electrically conductive shell around each CNC. The resultant CNCs were then characterized for their chemical, morphological, and electrical properties. Fourier-transform infrared analysis of the CNCs at each stage confirmed the expected chemical changes upon carbamation, hydrolysis, and polymerization and X-ray diffraction confirmed the permanence of the native crystalline structure of the CNCs. The atomic force microscopy images showed that the obtained CNCs were on average slightly thicker than the original ones, possibly due to the growth of the poly(o-toluidine) shell around them. Finally, using the four-point method, the obtained CNCs were electrically conductive with a conductivity of 0.46 S/cm. Such novel electrically conductive CNCs should have great potential in a wide range of applications including electronics, sensing, and medicine.
Collapse
Affiliation(s)
- Hatem Abushammala
- Environmental Health and Safety Program, College of Health Sciences, Abu Dhabi University, Abu Dhabi P.O. Box 59911, United Arab Emirates
- Fraunhofer Institute for Wood Research (WKI), Bienroder Weg 54E, 38108 Braunschweig, Germany
| | - Jia Mao
- Fraunhofer Institute for Wood Research (WKI), Bienroder Weg 54E, 38108 Braunschweig, Germany
- Department of Mechanical Engineering, Al Ghurair University, International Academic City, Dubai P.O. Box 37374, United Arab Emirates
| |
Collapse
|
4
|
Bangar SP, Harussani M, Ilyas R, Ashogbon AO, Singh A, Trif M, Jafari SM. Surface modifications of cellulose nanocrystals: Processes, properties, and applications. Food Hydrocoll 2022. [DOI: 10.1016/j.foodhyd.2022.107689] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/27/2022]
|
5
|
Cellulose Nanocrystals (CNC)-Based Functional Materials for Supercapacitor Applications. NANOMATERIALS 2022; 12:nano12111828. [PMID: 35683684 PMCID: PMC9182373 DOI: 10.3390/nano12111828] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/25/2022] [Revised: 05/18/2022] [Accepted: 05/24/2022] [Indexed: 12/10/2022]
Abstract
The growth of industrialization and the population has increased the usage of fossil fuels, resulting in the emission of large amounts of CO2. This serious environmental issue can be abated by using sustainable and environmentally friendly materials with promising novel and superior performance as an alternative to petroleum-based plastics. Emerging nanomaterials derived from abundant natural resources have received considerable attention as candidates to replace petroleum-based synthetic polymers. As renewable materials from biomass, cellulose nanocrystals (CNCs) nanomaterials exhibit unique physicochemical properties, low cost, biocompatibility and biodegradability. Among a plethora of applications, CNCs have become proven nanomaterials for energy applications encompassing energy storage devices and supercapacitors. This review highlights the recent research contribution on novel CNC-conductive materials and CNCs-based nanocomposites, focusing on their synthesis, surface functionalization and potential applications as supercapacitors (SCs). The synthesis of CNCs encompasses various pretreatment steps including acid hydrolysis, mechanical exfoliation and enzymatic and combination processes from renewable carbon sources. For the widespread applications of CNCs, their derivatives such as carboxylated CNCs, aldehyde-CNCs, hydride-CNCs and sulfonated CNC-based materials are more pertinent. The potential applications of CNCs-conductive hybrid composites as SCs, critical technical issues and the future feasibility of this endeavor are highlighted. Discussion is also extended to the transformation of renewable and low-attractive CNCs to conductive nanocomposites using green approaches. This review also addresses the key scientific achievements and industrial uses of nanoscale materials and composites for energy conversion and storage applications.
Collapse
|
6
|
Wang M, Liang S, Gao W, Qin Y. The effect of promoting hydrogen bond aggregation based on PEMTC on the mechanical properties and shape memory function of polyurethane elastomers. ROYAL SOCIETY OPEN SCIENCE 2022; 9:211393. [PMID: 35316953 PMCID: PMC8889183 DOI: 10.1098/rsos.211393] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/26/2021] [Accepted: 01/05/2022] [Indexed: 06/14/2023]
Abstract
In this work, small molecule diols named PEMTC were synthesized from isophorone diisocyanate, N-(2-hydroxyethyl)acrylamide and trimethylolpropane by a semi-directional method. PEMTC (2-(prop-2-enamido)ethyl N-{3-[({[2-ethyl-3-hydroxy-2(hydroxymethyl)propoxy]carbonyl}amino)methyl]-3,5,5-trimethylcyclohexyl}carbamate) contains hydrogen bond active site and light-initiated C=C. We introduced it as a branch chain block into poly(ε-caprolactone) (PCL). By feeding and monitoring the reaction process, we synthesized a large number of polyurethane elastomers, hydrogen bonds PCL-based elastomer (HPE), which contain a large number of dynamic hydrogen bonds. Under UV irradiation, PEMTC can make HPE molecules aggregate and cross-link, improve the degree of internal hydrogen bonding interaction of HPE materials and endow HPE materials with good elasticity, toughness, heat resistance and shape memory ability. After 270 nm UV irradiation, the elongation at break of HPE materials decreased from 607.14-1463.95% to 426.60-610.36%, but the strength at break of HPE materials increased from 3.36-13.52 to 10.28-41.52 MPa, and the toughness increased from 16.36-129.71 to 40.48-172.22 MJ m-3. In addition, the highest shape fixation rate of HPE after UV irradiation was 98.0%, and the recovery rate was 93.7%.
Collapse
Affiliation(s)
- Muqun Wang
- School of Resources, Environment and Materials, Guangxi University, Nanning 530000, Guangxi, People's Republic of China
| | - Shaofeng Liang
- School of Resources, Environment and Materials, Guangxi University, Nanning 530000, Guangxi, People's Republic of China
| | - Wei Gao
- School of Resources, Environment and Materials, Guangxi University, Nanning 530000, Guangxi, People's Republic of China
- Guangxi Engineering and Technology Research Center for High Quality Structural Panels from Biomass Wastes, Nanning 530000, Guangxi, People's Republic of China
| | - Yuxuan Qin
- School of Resources, Environment and Materials, Guangxi University, Nanning 530000, Guangxi, People's Republic of China
| |
Collapse
|
7
|
|
8
|
Rana AK, Frollini E, Thakur VK. Cellulose nanocrystals: Pretreatments, preparation strategies, and surface functionalization. Int J Biol Macromol 2021; 182:1554-1581. [PMID: 34029581 DOI: 10.1016/j.ijbiomac.2021.05.119] [Citation(s) in RCA: 108] [Impact Index Per Article: 36.0] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/17/2021] [Revised: 05/08/2021] [Accepted: 05/16/2021] [Indexed: 01/04/2023]
Abstract
Cellulose nanocrystals (CNCs) have attracted great interest from researchers from academic and industrial areas because of their interesting structural features and unique physicochemical properties, such as magnificent mechanical strength, high surface area, and many hydroxyl groups for chemical modification, low density, and biodegradability. CNCs are an outstanding contender for applications in assorted fields comprehensive of, e.g., biomedical, electronic gadgets, water purifications, nanocomposites, membranes. Additionally, a persistent progression is going on in the extraction and surface modification of cellulose nanocrystals to fulfill the expanding need of producers to fabricate cellulose nanocrystals-based materials. In this review, the foundation of nanocellulose that emerged from lignocellulosic biomass and recent development in extraction/preparation of cellulose nanocrystals and different types of cellulose nanocrystal surface modification techniques are summed up. The different sorts of cellulose modification reactions that have been discussed are acetylation, oxidations, esterifications, etherifications, ion-pair formation, hydrogen bonding, silanization, nucleophilic substitution reactions, and so forth. The mechanisms of surface functionalization reactions are also introduced and considered concerning the impact on the reactions. Moreover, the primary association of cellulose and different forms of nanocellulose has likewise been examined for beginners in this field.
Collapse
Affiliation(s)
| | - Elisabete Frollini
- São Carlos Institute of Chemistry, Macromolecular Materials and Lignocellulosic Fibers Group, Center for Science and Technology of BioResources, University of São Paulo, C.P. 780, São Carlos, SP CEP 13560-970, Brazil.
| | - Vijay Kumar Thakur
- Biorefining and Advanced Materials Research Center, Scotland's Rural College (SRUC), Kings Buildings, West Mains Road, Edinburgh, UK; Department of Mechanical Engineering, School of Engineering, Shiv Nadar University, Greater Noida, Uttar Pradesh 201314, India.
| |
Collapse
|
9
|
Oberlintner A, Likozar B, Novak U. Hydrophobic functionalization reactions of structured cellulose nanomaterials: Mechanisms, kinetics and in silico multi-scale models. Carbohydr Polym 2021; 259:117742. [PMID: 33674002 DOI: 10.1016/j.carbpol.2021.117742] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/05/2020] [Revised: 01/26/2021] [Accepted: 01/27/2021] [Indexed: 12/12/2022]
Abstract
Nanoscale-interfaced cellulose nanomaterials are extracted from polysaccharides, which are widely available in nature, biocompatible and biodegradable. Moreover, the latter have a potential to be recycled, upcycled, and formulate therefore a great theoretical predisposition to be used in a number of applications. Nanocrystals, nano-fibrils and nanofibers possess reactive functional groups that enable hydrophobic surface modifications. Analysed literature data, concerning mechanisms, pathways and kinetics, was screened, compared and assessed with regard to the demand of a catalyst, different measurement conditions and added molecule reactions. There is presently only a scarce technique description for carbonOH bond functionalization, considering the elementary chemical steps, sequences and intermediates of these (non)catalytic transformations. The overview of the prevailing basic research together with in silico modelling approach methodology gives us a deeper physical understanding of processes. Finally, to further highlight the applicability of such raw materials, the review of the development in several multidisciplinary fields was presented.
Collapse
Affiliation(s)
- Ana Oberlintner
- Department of Catalysis and Chemical Reaction Engineering, National Institute of Chemistry, Hajdrihova 19, 1000, Ljubljana, Slovenia; Jožef Stefan International Postgraduate School, Jamova Cesta 39, 1000 Ljubljana, Slovenia.
| | - Blaž Likozar
- Department of Catalysis and Chemical Reaction Engineering, National Institute of Chemistry, Hajdrihova 19, 1000, Ljubljana, Slovenia; Faculty of Chemistry and Chemical Technology, University of Ljubljana, Večna Pot 113, SI-1000, Ljubljana, Slovenia.
| | - Uroš Novak
- Department of Catalysis and Chemical Reaction Engineering, National Institute of Chemistry, Hajdrihova 19, 1000, Ljubljana, Slovenia.
| |
Collapse
|
10
|
Olonisakin K, Li R, Zhang XX, Xiao F, Gao J, Yang W. Effect of TDI-Assisted Hydrophobic Surface Modification of Microcrystalline Cellulose on the Tensile Fracture of MCC/PLA Composite, and Estimation of the Degree of Substitution by Linear Regression. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2021; 37:793-801. [PMID: 33404257 DOI: 10.1021/acs.langmuir.0c03130] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Microcrystalline cellulose (MCC) was modified using toluene-2,4-diisocyanate (TDI) in tetrahydrofuran (THF). The reaction was set up for 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, and 24 h at 75 °C. The study was aimed at hydrophobic modification of microcrystalline cellulose (MCC) to improve its dispersion in PLA matrix. Data from the elemental analysis were used to develop a statistical model to predict the degree of substitution (DS) of the OH on the surface of the MCC using both the water contact angle (WCA) and the time of carbamation as the independent variables. Composite was fabricated at 1%, 2%, 3%, 4%, and 5% fiber loading. Fourier transformed infrared spectroscopy was used to characterize the MCC and to confirm the successful graft of TDI to the MCC surface. The morphology and elemental analysis of the modified samples were examined with SEM-EDX. The samples' wettability was analyzed with a contact angle meter to measure the water contact angle (WCA). The tensile properties of composites were analyzed on a universal testing machine. The result showed that, after 1 h of carbamation, the minimum DS recorded was 0.11, and the maximum DS after 24 h was 0.16. The SEM revealed that the modified MCC had homogeneous dispersion in the polymer matrix. At 3% fiber loading, the tensile strength (TS) and elongation were at a maximum and had improvements of 80.67% and 79.44% as compared to neat PLA. The fractured tensile surface from SEM analysis showed that surface modification enhanced fiber-matrix adhesion and significantly improved the composite's strength and toughness. The proposed model that was developed in this study had a coefficient of determination (R2) of 93% to show that the model has a near-perfect goodness of fit and can well be an effective approach to predict the DS of OH from WCA and the time of reaction at similar or the same reaction conditions.
Collapse
Affiliation(s)
- Kehinde Olonisakin
- College of Materials Engineering, Fujian Agriculture and Forestry University, Fuzhou 350108, China
| | - Ran Li
- College of Materials Engineering, Fujian Agriculture and Forestry University, Fuzhou 350108, China
| | - Xin-Xiang Zhang
- College of Materials Engineering, Fujian Agriculture and Forestry University, Fuzhou 350108, China
| | - Fuchuan Xiao
- College of Materials Engineering, Fujian Agriculture and Forestry University, Fuzhou 350108, China
| | - Jie Gao
- College of Materials Engineering, Fujian Agriculture and Forestry University, Fuzhou 350108, China
| | - Wenbin Yang
- College of Materials Engineering, Fujian Agriculture and Forestry University, Fuzhou 350108, China
| |
Collapse
|
11
|
Grafting Diels-Alder moieties on cellulose nanocrystals through carbamation. Carbohydr Polym 2020; 250:116966. [PMID: 33049897 DOI: 10.1016/j.carbpol.2020.116966] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/08/2020] [Revised: 08/16/2020] [Accepted: 08/18/2020] [Indexed: 11/21/2022]
Abstract
The Diels-Alder reaction is a promising click chemistry for the design of advanced materials from cellulose nanocrystals (CNCs). Transferring such chemistry to cellulose nanocrystals requires the precise grafting of reactive Diels-Alder moeities under heterogeneous conditions without compromising the nanocrystals morphology. In this study toluene diisocyanate is used as a spacer to graft Diels-Alder moieties viz the furyl and protected maleimido moieties onto cellulose nanocrystals. A factorial experimental design reveals that reaction time and reactant molar ratio positively affect the grafting efficiency, as evidenced by FTIR and CHNS elemental analysis. The surface degree of substitution was analyzed via CHNS elemental analysis and XPS and found to range between 0.05 to 0.30, with a good agreement between the two techniques. 13C CP/MAS NMR confirmed that the grafted moieties and CNCs are intact after reaction. Side reactions were also observed and their impact on performing controllable click chemistry between cellulose nanocrystals is discussed.
Collapse
|
12
|
Wang R, Li C, Jiang Z, Wang Z. Self-Assembly of Amphiphilic Linear-Dendritic Carbosilane Block Surfactant for Waterborne Polyurethane Coating. Polymers (Basel) 2020; 12:polym12061318. [PMID: 32527026 PMCID: PMC7362264 DOI: 10.3390/polym12061318] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/06/2020] [Revised: 06/03/2020] [Accepted: 06/05/2020] [Indexed: 11/16/2022] Open
Abstract
The traditional two-component waterborne polyurethane coating system cannot effectively inhibit the undesirable side reaction between polyisocyanate and water during curing hardening. It is difficult to avoid the microbubbles formed by this reaction during the film formation process, which severely degrades the appearance and decreases the performance of the film. Therefore, the addition of an amphiphilic Linear-Dendritic carbosilane Block Surfactant (LDBS) to the hardener can physically separate the polyisocyanate emulsion from water through self-assembly. The bubble-free film thickness (BFFT) of the two-component waterborne polyurethane coating in this study is approximately 1.5-fold greater than commercial waterborne polyurethane coatings in today’s coating industry. Fourier transform infrared spectroscopy (FT-IR) varied the effectiveness of LDBS for inhibition of the undesirable side reaction. The successful application of the waterborne polyurethane coating with LDBS on the 600 km/h high-speed maglev train provides a technical solution for large-scale industrialization of waterborne polyurethane coating and complete replacement of solvent polyurethane coating.
Collapse
|
13
|
Impact of the Surface Properties of Cellulose Nanocrystals on the Crystallization Kinetics of Poly(Butylene Succinate). CRYSTALS 2020. [DOI: 10.3390/cryst10030196] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/30/2023]
Abstract
The hydrophilicity of cellulose nanocrystals (CNCs) is a major challenge for their processing with hydrophobic polymers and matrices. As a result, many surface modifications have been proposed to hydrophobize CNCs. The authors showed in an earlier study that grafting alcohols of different chain lengths onto the surface of CNCs using toluene diisocyanate (TDI) as a linker can systematically hydrophobize CNCs to a water contact angle of up to 120° depending on the alcohol chain length. Then, the hydrophobized CNCs were used to mechanically reinforce poly(butylene succinate) (PBS), which is a hydrophobic polymer. As a result of hydrophobization, PBS/CNCs interfacial adhesion and the composite mechanical properties significantly improved with the increasing CNC contact angle. Continuing on these results, this paper investigates the impact of CNC surface properties on the crystallization behavior of PBS using differential scanning calorimetry (DSC). The results showed that the crystallization temperature of PBS increased from 74.7 °C to up to 86.6 °C as a result of CNC nucleation activity, and its value was proportionally dependent on the contact angle of the CNCs. In agreement, the nucleation activity factor (φ) estimated using Dobreva and Gutzow’s method decreased with the increasing CNC contact angle. Despite the nucleation action of CNCs, the rate constant of PBS crystallization as estimated using the Avrami model decreased in general as a result of a prevailing impeding effect. This decrease was minimized with increasing the contact angle of the CNCs. The impeding effect also increased the average activation energy of crystallization, which was estimated using the Kissinger method. Moreover, the Avrami exponent (n) decreased because of CNC addition, implying a heterogeneous crystallization, which was also apparent in the crystallization thermograms. Overall, the CNC addition facilitated PBS nucleation but retarded its crystallization, and both processes were significantly affected by the surface properties of the CNCs.
Collapse
|
14
|
Abushammala H. Nano-Brushes of Alcohols Grafted onto Cellulose Nanocrystals for Reinforcing Poly(Butylene Succinate): Impact of Alcohol Chain Length on Interfacial Adhesion. Polymers (Basel) 2020; 12:polym12010095. [PMID: 31947910 PMCID: PMC7023635 DOI: 10.3390/polym12010095] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/19/2019] [Revised: 12/17/2019] [Accepted: 12/20/2019] [Indexed: 11/20/2022] Open
Abstract
Despite the many interesting properties of cellulose nanocrystals (CNCs), their hydrophilicity is one of the main challenges for their processing with hydrophobic polymers and matrices. To overcome this challenge, this paper describes the preparation of brush-like CNCs with tailored surface properties by grafting alcohols of different chain lengths onto their surfaces. Ethanol, 1-butanol, 1-hexanol, and 1-octanol were grafted on the CNC surface using 2,4-toluene diisocyanate (TDI) as a linker. The CNCs were characterized for their structural, morphological, surface, and thermal properties. Because of the grafting, the water contact angle of the CNCs significantly increased from 32° to up to 120°, which was dependent on the chain length of the grafted alcohol. The thermal stability of the CNCs was also improved, mainly as a result of the reaction of TDI with the CNC hydroxyl groups. Later, the CNCs were used to reinforce films of poly(butylene succinate) (PBS), which were then characterized using dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA). An increase of up to two-fold in the storage modulus was observed using DMA, which was dependent on the chain length of the grafted alcohol. However, no change in the glass transition temperature or degradation temperature of PBS was detected. This approach is proved efficient for tailoring the surface properties of CNCs towards excellent interfacial adhesion in their composites.
Collapse
Affiliation(s)
- Hatem Abushammala
- Fraunhofer Institute for Wood Research (WKI), Bienroder Weg 54E, 38108 Braunschweig, Germany
| |
Collapse
|
15
|
Abushammala H, Mao J. A Review of the Surface Modification of Cellulose and Nanocellulose Using Aliphatic and Aromatic Mono- and Di-Isocyanates. Molecules 2019; 24:molecules24152782. [PMID: 31370227 PMCID: PMC6695919 DOI: 10.3390/molecules24152782] [Citation(s) in RCA: 55] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/15/2019] [Revised: 07/28/2019] [Accepted: 07/29/2019] [Indexed: 11/16/2022] Open
Abstract
Nanocellulose has been subjected to a wide range of chemical modifications towards increasing its potential in certain fields of interest. These modifications either modulated the chemistry of the nanocellulose itself or introduced certain functional groups onto its surface, which varied from simple molecules to polymers. Among many, aliphatic and aromatic mono- and di-isocyanates are a group of chemicals that have been used for a century to modify cellulose. Despite only being used recently with nanocellulose, they have shown great potential as surface modifiers and chemical linkers to graft certain functional chemicals and polymers onto the nanocellulose surface. This review discusses the modification of cellulose and nanocellulose using isocyanates including phenyl isocyanate (PI), octadecyl isocyanate (OI), toluene diisocyanate (TDI), diphenylmethane diisocyanate (MDI), hexamethylene diisocyanate (HMDI), and their derivatives and polymers. It also presents the most commonly used nanocellulose modification strategies including their advantages and disadvantages. It finally discusses the challenges of using isocyanates, in general, for nanocellulose modification.
Collapse
Affiliation(s)
- Hatem Abushammala
- Fraunhofer Institute for Wood Research (WKI), Bienroder Weg 54E, 38108 Braunschweig, Germany.
| | - Jia Mao
- Fraunhofer Institute for Wood Research (WKI), Bienroder Weg 54E, 38108 Braunschweig, Germany
| |
Collapse
|