A Simple Preparation Route for Bio-Phenol MQ Silicone Resin via the Hydrosilylation Method and its Autonomic Antibacterial Property

SiO2 bridged AlN/methylphenyl silicone resin composite with integrated superior insulating property, high-temperature resistance, and high thermal conductivity

A high-temperature-resistance insulating layer with high thermal conductivity is the key component for fabricating the instant metal-based electric heating tube. However, it is still a challenge for materials to possess excellent high-temperature resistance, superior insulating property, and high thermal conductivity at the same time. Here, a novel SiO2 bridged AlN/MSR composite based on methylphenyl silicone resin (MSR) and AlN filler was reported. MSR with a high thermal decomposition temperature of 452.0 °C and a high withstand voltage of 5.6 kV was first synthesized by adjusting the contents of alkyl and phenyl groups. The superior high-temperature resistant insulating property is 3.7 and 2.4 times higher than the national standard requirement of 1.5 kV and commercial silicone resin, respectively. The hydrogen bonds formed between SiO2, AlN, and MSR and the electrostatic adsorption between SiO2 and AlN can remarkably improve the uniform dispersion of AlN in MSR and thus enhance the insulating property, thermal conductivity, and thermal stability. With the addition of 2 wt% SiO2 and 50 wt% AlN, the SiO2-AlN/MSR composite exhibits an extremely high withstand voltage of 7.3 kV, a high thermal conductivity of 0.553 W·m-1·K-1, and an enhanced decomposition temperature of 475 °C. The superior insulating property and thermal conductivity are 4.9 and 1.3 times higher than the national standard requirement and pure MSR, respectively. This novel composite shows great potential for application in the fields requiring integrated superior insulating property, high-temperature resistance, and high thermal conductivity.

Eugenol-Based Polymeric Materials-Antibacterial Activity and Applications

Eugenol (4-Allyl-2-methoxy phenol) (EUG) is a plant-derived allyl chain-substituted guaiacol, widely known for its antimicrobial and anesthetic properties, as well as the ability to scavenge reactive oxygen species. It is typically used as a mixture with zinc oxide (ZOE) for the preparation of restorative tooth fillings and treatment of root canal infections. However, the high volatility of this insoluble-in-water component of natural essential oils can be an obstacle to its wider application. Moreover, molecular eugenol can be allergenic and even toxic if taken orally in high doses for long periods of time. Therefore, a growing interest in eugenol loading in polymeric materials (including the encapsulation of molecular eugenol and polymerization of EUG-derived monomers) has been noted recently. Such active macromolecular systems enhance the stability of eugenol action and potentially provide prolonged contact with pathogens without the undesired side effects of free EUG. In this review, we present an overview of methods leading to the formation of macromolecular derivatives of eugenol as well as the latest developments and further perspectives in their pharmacological and antimicrobial applications.

Synthetic Pressure Sensitive Adhesives for Biomedical Applications

Pressure sensitive adhesives are components of everyday products found in homes, offices, industries, and hospitals. Serving the general purpose of fissure repair and object fixation, pressure sensitive adhesives indiscriminately bind surfaces, as long as contact pressure is administered at application. With that being said, the chemical and material properties of the adhesive formulation define the strength of a pressure sensitive adhesive to a particular surface. Given our increased understanding of the viscoelastic material requirements as well as the intermolecular interactions at the binding interface required for functional adhesives, pressure sensitive adhesives are now being explored for greater use. New polymer formulations impart functionality and degradability for both internal and external applications. This review highlights the structure-property relationships between polymer architecture and pressure sensitive adhesion, specifically for medicine. We discuss the rational, molecular-level design of synthetic polymers for durable, removable, and biocompatible adhesion to wet surfaces like tissue. Finally, we examine prevalent challenges in biomedical wound closure and the new, innovative strategies being employed to address them. We conclude by summarizing the progress of current research, identifying additional clinical opportunities, and discussing future prospects.

Hybrid Bio-Based Silicone Coatings with Anti-adhesive Properties

Hybrid polysiloxanes and polysilsesquioxanes grafted with naturally occurring bioactive phytochemicals: eugenol and linalool, were synthesized and investigated with regard to their structure and properties. The two series of materials, differing in the type of inorganic structure and the content of active groups, were coated onto the surface of glass plates, and their antibiofilm activities against bacteria Aeromonas hydrophila were assessed by luminometry and fluorescence microscopy. Bioactivity was correlated with specific properties of the hybrid coatings (chemical structure, surface free energy and adhesiveness). The functionalized polysilsesquioxanes exhibited the most favorable anti-adhesive effects. Cell adhesion after 6 days of incubation, expressed as RLU/cm², was significantly reduced (44 and 67 for, respectively, Z-E-100 and Z-L-100, compared to 517 for the control glass carrier). The surface stickiness of polysiloxane films deteriorated their anti-adhesion properties, despite the presence of a large amount of bioactive species.

Bio-based epoxy functionalized MQ silicone resins: from synthesis to toughened epoxy composites with good mechanical properties, thermal resistance and transparency

A series bio-based eugenol silicone resins are synthesized, and EG-1.2MQ shows its good promise as a new green multifunctional additive to well balance the toughness, mechanical properties, transparency, and other properties.

Eugenol, a Promising Building Block for Biobased Polymers with Cutting-Edge Properties

Biobased materials, derived from biomass building blocks, are essential in the pursuit of sustainable materials. Eugenol, a natural phenol obtained from clove oil, but also from lignin depolymerization, possesses a chemical structure that allows its easy modification to obtain a broad and versatile platform of biobased monomers. In this Perspective, an overview of the variety of reactions that have been executed on the allylic double bond, phenol hydroxyl group, aromatic ring, and methoxy group is given, focusing our attention on those to obtain monomers suitable for different polymerization reactions. Furthermore, possible applications and perspectives on the eugenol-derived materials are provided.

An Insight into the Structural Diversity and Clinical Applicability of Polyurethanes in Biomedicine

Due to their mechanical properties, ranging from flexible to hard materials, polyurethanes (PUs) have been widely used in many industrial and biomedical applications. PUs' characteristics, along with their biocompatibility, make them successful biomaterials for short and medium-duration applications. The morphology of PUs includes two structural phases: hard and soft segments. Their high mechanical resistance featuresare determined by the hard segment, while the elastomeric behaviour is established by the soft segment. The most important biomedical applications of PUs include antibacterial surfaces and catheters, blood oxygenators, dialysis devices, stents, cardiac valves, vascular prostheses, bioadhesives/surgical dressings/pressure-sensitive adhesives, drug delivery systems, tissue engineering scaffolds and electrospinning, nerve generation, pacemaker lead insulation and coatings for breast implants. The diversity of polyurethane properties, due to the ease of bulk and surface modification, plays a vital role in their applications.

Synthesis of High Molecular Weight Vinylphenyl-Con Taining MQ Silicone Resin via Hydrosilylation Reaction

To overcome the inherent limitation that the preparation of high molecular weight MQ copolymers (Mw ≥ 30,000 g/mol) via the hydrolysis and condensation of solicate salts generally results in an intractable gel, vinylphenyl-containing MQ silicone resin with a high molecular weight was designed and synthesized through the hydrosilylation reaction of vinyl-containing MQ silicone resin and linear poly(diphenylsiloxane) with two terminal Si–H bonds. The weight average molecular weight of these modified copolymers reported here is at least 30,000 dal·mol−1. These polymers have favorable thermal stability and a higher refractive index than that of the base resin due to the formation of novel regular macromolecular structures and the introduction of phenyl groups. These inorganic/organic hybrid materials could be used as a potential component for temperature-resistance electronics adhesive, heat-resistant coatings and high-performance liquid silicone rubber. Moreover, the proposed process also provides a possibility to choose higher molecular weight MQ silicones according to application requirements.