The Use of Click-Type Reactions in the Preparation of Thermosets

Soft Hydroxyapatite Composites Based on Triazine-Trione Systems as Potential Biomedical Engineering Frameworks

Composites of triazine-trione (TATO) thiol-ene networks and hydroxyapatite (HA) have shown great potential as topological fixation materials for complex bone fractures due to their high flexural modulus, biocompatibility, and insusceptibility to forming soft-tissue adhesions. However, the rigid mechanical properties of these composites make them unsuitable for applications requiring softness. The scope of these materials could therefore be widened by the design of new TATO monomers that would lead to composites with a range of mechanical properties. In this work, four novel TATO-based monomers, decorated with either ester or amide linkages as well as alkene or alkyne end groups, have been proposed and synthesized via fluoride-promoted esterification (FPE) chemistry. The ester-modified monomers were then successfully formulated along with the thiol TATO monomer tris [2-(3-mercaptopropionyloxy)ethyl] isocyanurate (TEMPIC) and HA to give soft composites, following the established photo-initiated thiol-ene coupling (TEC) or thiol-yne coupling (TYC) chemistry methodologies. The most promising composite shows excellent softness, with a flexural modulus of 57 (2) MPa and ε_f at maximum σ_f of 11.8 (0.3)%, which are 117 and 10 times softer than the previously developed system containing the commercially available tri-allyl TATO monomer (TATATO). Meanwhile, the surgically convenient viscosity of the composite resins and their excellent cytotoxicity profile allow them to be used in the construction of soft objects in a variety of shapes through drop-casting suitable for biomedical applications.

Synthesis of Metalorganic Copolymers Containing Various Contorted Units and Iron(II) Clathrochelates with Lateral Butyl Chains: Conspicuous Adsorbents of Lithium Ions and Methylene Blue

We report the synthesis of three highly soluble metalorganic copolymers, TCP1-3, that were made from a one-pot complexation of iron(II) clathrochelate units that are interconnected by various thioether-containing contorted groups. TCP1-3 were converted into their poly(vinyl sulfone) derivatives OTCP1-3 quantitatively via the selective oxidation of the thioether moieties into their respective sulfones. All of the copolymers, TCP1-3 and OTCP1-3, underwent structural analysis by various techniques; namely, ¹H- and ¹³C-nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), and gel permeation chromatography (GPC). The copolymers were tested as potent lithium ions adsorbents revealing a maximum adsorption (q_m) value of 2.31 mg g^-1 for OTCP2. Furthermore, this same copolymer was found to be a promising adsorbent of methylene blue (MEB); an isothermal adsorption study divulged that OTCP2's uptake of MEB from an aqueous solution (following the Langmuir model) was, at maximum adsorption capacity, (q_m) of 480.77 mg g^-1; whereas the kinetic study divulged that the adsorption follows pseudo second-order kinetics with an equilibrium adsorption capacity (q_e,cal) of 45.40 mg g^-1.

Enhancement of Epoxy Thermosets with Hyperbranched and Multiarm Star Polymers: A Review

Hyperbranched polymers and multiarm star polymers are a type of dendritic polymers which have attracted substantial interest during the last 30 years because of their unique properties. They can be used to modify epoxy thermosets to increase their toughness and flexibility but without adversely affecting other properties such as reactivity or thermal properties. In addition, the final properties of materials can be tailored by modifying the structure, molecular weight, or type of functional end-groups of the hyperbranched and multiarm star polymers. In this review, we focus on the modification of epoxy-based thermosets with hyperbranched and multiarm star polymers in terms of the effect on the curing process of epoxy formulations, thermal, mechanical, and rheological properties, and their advantages in fire retardancy on the final thermosets.

Streamlined concept towards spatially resolved photoactivation of dynamic transesterification in vitrimeric polymers by applying thermally stable photolatent bases

Through a well targeted design, vitrimers are able to reorganise their three-dimensional covalently crosslinked network structure by associative exchange reactions when the so-called topology freezing transition temperature (Tv) is exceeded....

Soft Bioelectronics Based on Nanomaterials

Recent advances in nanostructured materials and unconventional device designs have transformed the bioelectronics from a rigid and bulky form into a soft and ultrathin form and brought enormous advantages to the bioelectronics. For example, mechanical deformability of the soft bioelectronics and thus its conformal contact onto soft curved organs such as brain, heart, and skin have allowed researchers to measure high-quality biosignals, deliver real-time feedback treatments, and lower long-term side-effects in vivo. Here, we review various materials, fabrication methods, and device strategies for flexible and stretchable electronics, especially focusing on soft biointegrated electronics using nanomaterials and their composites. First, we summarize top-down material processing and bottom-up synthesis methods of various nanomaterials. Next, we discuss state-of-the-art technologies for intrinsically stretchable nanocomposites composed of nanostructured materials incorporated in elastomers or hydrogels. We also briefly discuss unconventional device design strategies for soft bioelectronics. Then individual device components for soft bioelectronics, such as biosensing, data storage, display, therapeutic stimulation, and power supply devices, are introduced. Afterward, representative application examples of the soft bioelectronics are described. A brief summary with a discussion on remaining challenges concludes the review.

Photocurable Coatings Based on Bio-Renewable Oligomers and Monomers

Due to long-term problems related to environmental protection, economic aspects, and waste management in the chemical industry, it is justified to develop renewable polymers as an alternative to synthetic polymers. Two kinds of acrylic bio-renewable components were used for the modification of acrylated epoxidized soybean oil (AESO). The bio-based compositions used as photocurable binders to obtain the photocurable coatings with satisfactory properties and high bio content were then prepared. The kinetic of curing reaction of the oligomers and monomers towards radical photopolymerization and the properties of the cured coatings were fully investigated; the results are discussed in relation with the compounds’ structures. Important information about how to design and obtain renewable photocurable coatings with satisfactory properties was provided in this study. In this study, AESO resin was modified with renewable oligomer or (math)acrylate monomer to increase the reactivity and reduce the viscosity of the photoreactive system in order to obtain renewable and viable alternatives to petroleum-based polymeric materials with perfect film-forming properties. It turned out that both photopolymerization rate and hardness of cured coatings were increased significantly with the addition of modifiers; the use of a thiol modifier and change of the photoinitiator concentration allowed to improve the adhesion, hardness, and control of the photo-curing process.

Super-Toughened Fumed-Silica-Reinforced Thiol-Epoxy Composites Containing Epoxide-Terminated Polydimethylsiloxanes

In response to the demand for high-performance materials, epoxy thermosetting and its composites are widely used in various industries. However, their poor toughness, resulting from the high crosslinking density of the epoxy network, must be improved to expand their application to the manufacturing of flexible products. In this study, ductile epoxy thermosetting was produced using thiol compounds with functionalities of 2 and 3 as curing agents. The mechanical properties of the epoxy were further enhanced by incorporating fumed silica into it. To increase the filler dispersion, epoxide-terminated polydimethylsiloxane was synthesized and used as a composite component. Thanks to the polysiloxane-silica interaction, the nanosilica was uniformly dispersed in the epoxy composites, and their mechanical properties improved with increasing fumed silica content up to 5 phr (parts per hundred parts of epoxy resin). The toughness and impact strength of the composite containing 5 phr nanosilica were 517 (±13) MJ/m³ and 69.8 (±1.3) KJ/m², respectively.

Introduction of Photolatent Bases for Locally Controlling Dynamic Exchange Reactions in Thermo-Activated Vitrimers

Vitrimers exhibit a covalently crosslinked network structure, as is characteristic of classic thermosetting polymers. However, they are capable of rearranging their network topology by thermo-activated associative exchange reactions when the topology freezing transition temperature (T_v ) is exceeded. Despite the vast number of developed vitrimers, there is a serious lack of methods that enable a (spatially) controlled onset of these rearrangement reactions above T_v . Herein, we highlight the localized release of the efficient transesterification catalyst 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) by the UV-induced cleavage of a photolatent base within a covalently crosslinked thiol-epoxy network. Demonstrated with stress relaxation measurements conducted well above the network's T_v , only the controlled release of TBD facilitates the immediate onset of transesterification in terms of a viscoelastic flow. Moreover, the spatially resolved UV-mediated photoactivation of vitrimeric properties is confirmed by permanent shape changes induced locally in the material.

Selective removal of toxic organic dyes using Trӧger base-containing sulfone copolymers made from a metal-free thiol-yne click reaction followed by oxidation

Three copolymers TCP1–3 bearing Trӧger's base (TB) units intercalated with various thioether groups were synthesized using a catalyst-free thiol-yne click reaction. TCP1–3 display excellent solubility in common organic solvents allowing for their structural, and photophysical characterization. The thioether groups in TCP1–3 were selectively oxidized into their respective sulfone derivatives under mild oxidation reaction conditions affording the postmodified copolymers TCP4–6. Investigation of organic dye uptake from water by TCP1–6 proved their efficiency as selective adsorbents removing up to 100% of the cationic dye methylene blue (MEB) when compared to anionic dyes, such as Congo red (CR), methyl orange (MO) and methyl blue (MB). The sulfone-containing copolymers TCP4–6 display superior and faster MEB removal efficiencies with respect to their corresponding synthons TCP1–3.

Copolymers TCP1–3 with Trӧger's base units and aryl thioether groups were made via a click reaction. Selective oxidation of the thioethers into sulfone groups afforded TCP4–6 which display up to 100% removal efficiency of methylene blue from water.

Fabrication of Microfluidic Devices for Emulsion Formation by Microstereolithography

Droplet microfluidics—the art and science of forming droplets—has been revolutionary for high-throughput screening, directed evolution, single-cell sequencing, and material design. However, traditional fabrication techniques for microfluidic devices suffer from several disadvantages, including multistep processing, expensive facilities, and limited three-dimensional (3D) design flexibility. High-resolution additive manufacturing—and in particular, projection micro-stereolithography (PµSL)—provides a promising path for overcoming these drawbacks. Similar to polydimethylsiloxane-based microfluidics 20 years ago, 3D printing methods, such as PµSL, have provided a path toward a new era of microfluidic device design. PµSL greatly simplifies the device fabrication process, especially the access to truly 3D geometries, is cost-effective, and it enables multimaterial processing. In this review, we discuss both the basics and recent innovations in PµSL; the material basis with emphasis on custom-made photopolymer formulations; multimaterial 3D printing; and, 3D-printed microfluidic devices for emulsion formation as our focus application. Our goal is to support researchers in setting up their own PµSL system to fabricate tailor-made microfluidics.

Vegetable Oil-Based Thiol-Ene/Thiol-Epoxy Resins for Laser Direct Writing 3D Micro-/Nano-Lithography

The use of renewable sources for optical 3D printing instead of petroleum-based materials is increasingly growing. Combinations of photo- and thermal polymerization in dual curing processes can enhance the thermal and mechanical properties of the synthesized thermosets. Consequently, thiol-ene/thiol-epoxy polymers were obtained by combining UV and thermal curing of acrylated epoxidized soybean oil and epoxidized linseed oil with thiols, benzene-1,3-dithiol and pentaerythritol tetra(3-mercaptopropionate). Thiol-epoxy reaction was studied by calorimetry. The changes of rheological properties were examined during UV, thermal and dual curing to select the most suitable formulations for laser direct writing (LDW). The obtained polymers were characterized by dynamic-mechanical thermal analysis, thermogravimetry, and mechanical testing. The selected dual curable mixture was tested in LDW 3D lithography for validating its potential in optical micro- and nano-additive manufacturing. The obtained results demonstrated the suitability of epoxidized linseed oil as a biobased alternative to bisphenol A diglycidyl ether in thiol-epoxy thermal curing reactions. Dual cured thermosets showed higher rigidity, tensile strength, and Young’s modulus values compared with UV-cured thiol-ene polymers and the highest thermal stability from all prepared polymers. LDW results proved their suitability for high resolution 3D printing—individual features reaching an unprecedented 100 nm for plant-based materials. Finally, the biobased resin was tested for thermal post-treatment and 50% feature downscaling was achieved.

Ionogels Obtained by Thiol-ene Photopolymerization-Physicochemical Characterization and Application in Electrochemical Capacitors

Flexible ionogels with good mechanical properties were obtained in situ by thiol-ene photopolymerization of trimethylolpropane tris(3-mercaptopropionate) (TMPTP) and 1,3,5-triallyl-1,3,5-triazine-2,4,6(1H,3H,5H)-trione (TATT) (with C=C: SH ratio 1:1) in four imidazolium ionic liquids (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide—EMImNTf₂, 1-ethyl-3-methylimidazolium trifluoromethanesulfonate-EMImOTf, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide-BMImNTf₂, and 1-butyl-3-methylimidazolium trifluoromethanesulfonate—BMImOTf) used in the range 50 to 70 wt.%. The mechanical and electrochemical properties of obtained ionogels were examined. Ionogels with ionic liquids (ILs) with NTf₂⁻ anion are more puncture resistant than with OTf⁻ anion. Moreover, ionogels with the NTF₂⁻ anion have better electrochemical properties than those with the OTf⁻ anion. Although it should be noted that ionogels with the EMIm⁺ cation have a higher conductivity than the BMIm⁺. This is connected with intermolecular interactions between polymer matrix and IL related to the polarity of IL described by the Kamlet-Taft parameters. These parameters influence the morphology of the polymer matrix (as shown by the SEM micrograph), which is formed by interconnected polymer spheres.

Role of thiol oxidation by air in the mechanism of the self-initiated thermal thiol–ene polymerization

We highlight the role of thiyl initiating radicals generated by air oxidation of thiols in the mechanism accounting for the self-initiation of thiol–ene polymerization. The driving force of this reaction is polarization of the S–H bond.

Poly(2-ethyl-2-oxazoline-co-ethyleneimine)-block-poly(ε-caprolactone) based micelles: synthesis, characterization, peptide conjugation and cytotoxic activity

Here we present self-assembled polymeric micelles as potential delivery systems for therapeutic agents with highly tunable properties.