Systematic Investigation on the Structure-Property Relationship in Isotactic Polypropylene Films Processed via Cast Film Extrusion

Influence of the Ethanol Content of Adduct on the Comonomer Incorporation of Related Ziegler-Natta Catalysts in Propylene (Co)polymerizations

The aim of this work is to investigate the influence of the ethanol content of adducts on the catalytic behavior of related Ziegler-Natta (ZN) catalysts in propylene homo- and copolymerizations (with 1-hexene comonomer) in terms of activity, isotacticity, H2 response, and comonomer incorporation. For this purpose, three MgCl2.nEtOH adducts with n values of 0.7, 1.2, and 2.8 were synthesized and used in the synthesis of related ZN catalysts. The catalysts were thoroughly characterized using XRD, BET, SEM, EDX, N2 adsorption-desorption, and DFT techniques. Additionally, the microstructure of the synthesized (co)polymers was distinguished via DSC, SSA, and TREF techniques. Their activity was found to enhance with the adduct's ethanol content in both homo- and copolymerization experiments, and the increase was more pronounced in homopolymerization reactions in the absence of H2. Furthermore, the catalyst with the highest ethanol content provided a copolymer with a lower isotacticity index, a shorter meso sequence length, and a more uniform distribution of comonomer within the chains. These results were attributed to the higher total surface area and Ti content of the corresponding catalyst, as well as its lower average pore diameter, a larger proportion of large pores compared to the other two catalysts, and its spherical open bud morphology. It affirms the importance of catalyst/support ethanol-content control during the preparation process. Then, molecular simulation was employed to shed light on the iso-specificity of the polypropylene produced via synthesized catalysts.

Overview of the Cast Polyolefin Film Extrusion Technology for Multi-Layer Packaging Applications

The review article presents the technology of producing polyolefin-based films by extrusion casting. Due to the wide use of this type of film as packaging for food and other goods, obtaining films with favorable properties is still a challenge for many groups of producers in the plastics market. The feedblock process and multimanifold process are the main methods of producing multi-layer film. In the case of food films, appropriate barrier properties are required, as well as durability and puncture resistance also at low temperatures. On the other hand, in order to properly pack and present products, an appropriate degree of transparency must be maintained. Therefore, processing aids such as anti-slip, anti-block and release agents are commonly used. Other popular modifiers, such as waxes, fatty acid amides and mineral fillers-silica, talc or calcium carbonate-and their use in film extrusion are discussed. The article also presents common production problems and their prevention.

A coarse-grained model for capturing the helical behavior of isotactic polypropylene

Understanding the process-property relations of helical polymers using molecular simulations has been an attractive research field over the years. Specifically, isotactic polypropylene still remains a challenge for current computational experimentation, as it exhibits phenomena such as crystallization that emerge on large spatial and temporal scales. Coarse-graining is an efficient technique for approaching such phenomena, although previous coarse-grained models lack in preserving important atomistic and structural details. In this paper we develop a new coarse-grained model, based on the popular MARTINI force field, that is able to reproduce the helical behavior of isotactic polypropylene. To test the model, the predicted statistical and structural properties (characteristic ratio, density, entanglement molecular weight, solubility parameter in the melt) are compared with previous simulation results and available experimental data. For the development of the new coarse-grained force field, a single unperturbed chain Monte Carlo algorithm has been implemented: an efficient algorithm which samples conformations representative of a melt by simulating just a single chain.

Crystallization of Random Metallocene-Catalyzed Propylene-Based Copolymers with Ethylene and 1-Hexene on Rapid Cooling

Propylene-based random copolymers with either ethylene or 1-hexene as comonomer, produced using a metallocene catalyst, were studied regarding their crystallization behaviors, with a focus on rapid cooling. To get an impression of processing effects, fast scanning chip calorimetry (FSC) was used in addition to the characterization of the mechanical performance. When comparing the comonomer type and the relation to commercial grades based on Ziegler-Natta-type catalysts, both an interaction with the catalyst-related regio-defects and a significant difference between ethylene and 1-hexene was observed. A soluble-type nucleating agent was found to modify the behavior, but to an increasingly lesser degree at high cooling rates.

Microstructural Origin of the Double Yield Points of the Metallocene Linear Low-Density Polyethylene (mLLDPE) Precursor Film under Uniaxial Tensile Deformation

The microstructural origin of the double yield points of metallocene linear low-density polyethylene (mLLDPE) precursor films has been studied with the assistance of the synchrotron radiation small- and wide-angle X-ray scattering (SAXS/WAXS). It has been shown that the microstructural origin of the double yield points is highly related to the initial orientation of the original precursor film. For less oriented mLLDPE precursor films, the rearrangement of lamellae and the appearance of the monoclinic phase are the microstructural origins of the first yield point. In comparison, for the highly-oriented mLLDPE precursor film, only the orthorhombic-monoclinic phase transition appears at the first yield point. The melting-recrystallization and the formation of the fibrillary structure happen beyond the second yield point for all studied mLLDPE precursor films. Finally, the detailed microstructural evolution roadmaps of mLLDPE precursor films under uniaxial tensile deformation have been established, which might serve as a guide for processing high-performance polymer films by post-stretching.