Chitosan-ZnO Nanocomposites Assessed by Dielectric, Mechanical, and Piezoelectric Properties

Extrusion-Based 3D Bioprinting of Bioactive and Piezoelectric Scaffolds as Potential Therapy for Treating Critical Soft Tissue Wounds

Objective: This study focuses on developing bioactive piezoelectric scaffolds that could deliver bioelectrical cues to potentially treat injuries to soft tissues such as skeletal muscles and promote active regeneration. Approach: To address the underexplored aspect of bioelectrical cues in skeletal muscle tissue engineering (SMTE), we developed piezoelectric bioink based on natural bioactive materials such as sodium alginate, gelatin, and chitosan. Extrusion-based 3D bioprinting was utilized to develop scaffolds that mimic muscle stiffness and generate electrical stimulation (E-stim) when subjected to forces. The biocompatibility of these scaffolds was tested with the C2C12 muscle cell line. Results: The bioink demonstrated suitable rheological properties for 3D bioprinting, resulting in high-resolution composite sodium alginate-gelatin-chitosan scaffolds with good structural fidelity. The scaffolds exhibited a 42-60 kPa stiffness, similar to muscle. When a controlled force of 5N was applied to the scaffolds at a constant frequency of 4 Hz, they generated electrical fields and impulses (charge), indicating their suitability as a stand-alone scaffold to generate E-stim and instill bioelectrical cues in the wound region. The cell viability and proliferation test results confirm the scaffold's biocompatibility with C2C12s and the benefit of piezoelectricity in promoting muscle cell growth kinetics. Our study indicates that our piezoelectric bioink and scaffolds offer promise as autonomous E-stim-generating regenerative therapy for SMTE. Innovation: A novel approach for treating skeletal muscle wounds was introduced by developing a bioactive electroactive scaffold capable of autonomously generating E-stim without stimulators and electrodes. This scaffold offers a unique approach to enhancing skeletal muscle regeneration through bioelectric cues, addressing a major gap in the SMTE, that is, fibrotic tissue formation due to delayed muscle regeneration. Conclusion: A piezoelectric scaffold was developed, providing a promising solution for promoting skeletal muscle regeneration. This development can potentially address skeletal muscle injuries and offers a unique approach to facilitating skeletal muscle wound healing.

Enhancing physical characteristics and antibacterial efficacy of chitosan through investigation of microwave-assisted chemically formulated chitosan-coated ZnO and chitosan/ZnO physical composite

This study investigates the creation and analysis of chitosan-zinc oxide (CS-ZnO) nanocomposites, exploring their effectiveness in inhibiting bacteria. Two synthesis approaches, physical and chemical, were utilized. The CS-ZnO nanocomposites demonstrated strong antibacterial properties, especially against Staphylococcus aureus, a Gram-positive bacterium. Chemically synthesized nanocomposites (CZ10 and CZ100) exhibited larger inhibition zones (16.4 mm and 18.7 mm) compared to physically prepared CS-Z5 and CS-Z20 (12.2 mm and 13.8 mm) against Staphylococcus aureus. Moreover, CZ nanocomposites displayed enhanced thermal stability, with decomposition temperatures of 281°C and 290°C, surpassing CS-Z5 and CS-Z20 (260°C and 258°C). The residual mass percentages at 800°C were significantly higher for CZ10 and CZ100 (58% and 61%) than for CS-Z5 and CS-Z20 (36% and 34%). UV-Visible spectroscopy revealed reduced band gaps in the CS-ZnO nanocomposites, indicating improved light absorption. Transmission electron microscopy (TEM) confirmed uniform dispersion of ZnO nanoparticles within the chitosan matrix. In conclusion, this research underscores the impressive antimicrobial potential of CS-ZnO nanocomposites, especially against Gram-positive bacteria, and highlights their enhanced thermal stability. These findings hold promise for diverse applications in industries such as medicine, pharmaceuticals, and materials science, contributing to the development of sustainable materials with robust antimicrobial properties.

Enhancement of the Structure, Thermal, Linear/Nonlinear Optical Properties, and Antibacterial Activity of Poly (vinyl alcohol)/Chitosan/ZnO Nanocomposites for Eco-Friendly Applications

The preparation of poly (vinyl alcohol)/chitosan/ZnO (PVA/Cs/ZnO) nanocomposite films as bioactive nanocomposites was implemented through an environmentally friendly approach that included mixing, solution pouring, and solvent evaporation. The nanocomposite films were characterized using various techniques such as X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and UV-Vis spectroscopy. The XRD study revealed the encapsulation of nanoparticles by the PVA/Cs blend matrix. The DSC results showed that the addition of ZnO NPs increased glass transition and melting temperature values of the PVA/Cs blend. ATR-FTIR spectra detected an irregular shift (either red or blue) in some of the characteristic bands of the PVA/Cs nanocomposite, indicating the existence of intra/intermolecular hydrogen bonding creating an interaction between the OH groups of PVA/Cs and ZnO nanoparticles. A thermogravimetric (TGA) analysis demonstrated that the nanocomposites achieved better thermal resistance than a pure PVA/Cs blend and its thermal stability was enhanced with increasing concentration of ZnO nanoparticles. UV analysis showed that with an increase in the content of ZnO NPs, the optical bandgap of PVA/Cs was decreased from 4.43 eV to 3.55 eV and linear and nonlinear parameters were enhanced. Our optical results suggest the use of PVA/Cs/ZnO nanocomposite films for various optoelectronics applications. PVA/Cs/ZnO nanocomposites exhibited significant antibacterial activity against Gram-positive and Gram-negative bacteria. It was found that nanocomposite samples were more effective against Gram-positive compared to Gram-negative bacteria.

Electrostrictive and piezoelectrical properties of chitosan-poly(3-hydroxybutyrate) blend films

Herein, we report the high apparent piezoelectric coefficient for chitosan-poly(3-hydroxybutyrate) (CS-PHB) blend films. The structure of chitosan-poly(3-hydroxybutyrate) (CS-PHB) blend films, exploiting characteristics such as dielectric, polarization, apparent piezoelectric properties, and their dependencies on the composition, were investigated. Based on the results of XRD, SEM, FTIR, PFM, and dielectric spectroscopy measurements, the structure of CS-PHB blend films has been proposed, which consists of spheric-like inclusion formed by precipitating isotactic-PHB interface layer, which consists of syndiotactic-PHB hydrogen bonding with CS, and CS matrix. The synergistic effects of piezoelectricity and electrostriction help explain the high value of the apparent piezoelectric coefficient (d33) obtained in the blend film with 13 wt% of PHB (d33 ≈ 200 pC/N). The investigated CS-PHB blend films are a good candidate for tissue engineering applications.

Fabrication of PLA-Based Electrospun Nanofibers Reinforced with ZnO Nanoparticles and In Vitro Degradation Study

In this work, electrospun nanofibers based on polylactic acid, PLA, reinforced with ZnO nanoparticles have been studied, considering the growing importance of electrospun mats based on biopolymers for their applications in different fields. Specifically, electrospun nanofibers based on PLA have been prepared by adding ZnO nanoparticles at different concentrations, such as 0.5, 1, 3, 5, 10 and 20 wt%, with respect to the polymer matrix. The materials have been characterized in terms of their morphological, mechanical, and thermal properties, finding 3 wt% as the best concentration to produce PLA nanofibers reinforced with ZnO nanoparticles. In addition, hydrolytic degradation in phosphate buffer solution (PBS) was carried out to study the effect of ZnO nanoparticles on the degradation behavior of PLA-based electrospun nanofiber mats, obtaining an acceleration in the degradation of the PLA electrospun mat.

Theoretical and Experimental Aspects of Sodium Diclofenac Salt Release from Chitosan-Based Hydrogels and Possible Applications

Two formulations based on diclofenac sodium salt encapsulated into a chitosan hydrogel were designed and prepared, and their drug release was investigated by combining in vitro results with mathematical modeling. To understand how the pattern of drug encapsulation impacted its release, the formulations were supramolecularly and morphologically characterized by scanning electron microscopy and polarized light microscopy, respectively. The mechanism of diclofenac release was assessed by using a mathematical model based on the multifractal theory of motion. Various drug-delivery mechanisms, such as Fickian- and non-Fickian-type diffusion, were shown to be fundamental mechanisms. More precisely, in a case of multifractal one-dimensional drug diffusion in a controlled-release polymer-drug system (i.e., in the form of a plane with a certain thickness), a solution that allowed the model's validation through the obtained experimental data was established. The present research reveals possible new perspectives, for example in the prevention of intrauterine adhesions occurring through endometrial inflammation and other pathologies with an inflammatory mechanism background, such as periodontal diseases, and also therapeutic potential beyond the anti-inflammatory action of diclofenac as an anticancer agent, with a role in cell cycle regulation and apoptosis, using this type of drug-delivery system.

Ab Initio Calculations of Chitosan Effects on the Electronic Properties of Unpassivated Triangular ZnO Nanowires Oriented along [0001] Directions

In recent years, both chitosan and ZnO nanostructures have been identified as potential antibacterial substances; however, the potential applications of chitosan adsorbed on ZnO nanowires have not been explored and could offer exciting new perspectives for both materials, for example, in biocompatible electronic circuits. In this work, we investigate the effect of chitosan on the electronic properties of triangular ZnO nanowires (ZnO NWs) from a theoretical perspective. All calculations were performed using density functional theory within the generalized gradient approximation. We considered six different positions of the chitosan molecule (CS) on the nanowire surface. We varied the amine position of CS, viewing it parallel, perpendicular, and at a 45° angle with respect to the NW axis. Our results show that all configurations are chemically stable; moreover, the interaction of the NW surface with the OH radical of CS creates flat states within the band gap energy of the ZnO NWs that might resemble p-doping. In addition, these states induce changes in the band gap energy of the ZnO NWs. All NWs show high chemical stability regardless of the CS position; hence, the adsorption results of all NW assemblies appear to be chemically favorable.

Enhancing Strain-Sensing Properties of the Conductive Hydrogel by Introducing PVDF-TrFE

Conductive hydrogels have attracted attention because of their wide application in wearable devices. However, it is still a challenge to achieve conductive hydrogels with high sensitivity and wide frequency band response for smart wearable strain sensors. Here, we report a composite hydrogel with piezoresistive and piezoelectric sensing for flexible strain sensors. The composite hydrogel consists of cross-linked chitosan quaternary ammonium salt (CHACC) as the hydrogel matrix, poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT: PSS) as the conductive filler, and poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE) as the piezoelectric filler. A one-pot thermoforming and solution exchange method was used to synthesize the CHACC/PEDOT: PSS/PVDF-TrFE hydrogel. The hydrogel-based strain sensor exhibits very high sensitivity (GF: 19.3), fast response (response time: 63.2 ms), and wide frequency range (response frequency: 5-25 Hz), while maintaining excellent mechanical properties (elongation at break up to 293%). It can be concluded that enhanced strain-sensing properties of the hydrogel are contributed to both greater change in the relative resistance under stress and wider response to dynamic and static stimulus by adding PVDF-TrFE. This has a broad application in monitoring human motion, detecting subtle movements, and identifying object contours and a hydrogel-based array sensor. This work provides an insight into the design of composite hydrogels based on piezoelectric and piezoresistive sensing with applications for wearable sensors.

Facile Synthesis of La- and Chitosan-Doped CaO Nanoparticles and Their Evaluation for Catalytic and Antimicrobial Potential with Molecular Docking Studies

In the current study, a low-cost and straightforward coprecipitation technique was adopted to synthesize CaO and La-doped CS/CaO NPs. Different weight ratios (2 and 4) of La were doped into fixed amounts of CS and CaO. Synthesized samples exhibited outstanding catalytic performance by degrading methylene blue (MB) in a highly efficient manner. The X-ray diffraction technique detected the presence of a cubic phase of CaO and a decrease in crystallite size of the samples with the addition of La. Fourier transform infrared spectroscopy confirmed the presence of the dopant and the base material with functional groups at 712 cm^-1. A decrease in the absorption intensity of doped CaO was observed with an increasing amount of dopants La and CS accompanied by a blueshift leading to an increase in the band gap energy from 4.17 to 4.42 eV, as recorded with an ultraviolet-visible spectrophotometer. The presence of dopants (La and CS) and the evaluation of the elemental constitution of Ca and O were supported with the energy-dispersive spectroscopy technique. In an acidic medium, the catalytic activity against the MB dye was reduced (93.8%) for 4% La-doped CS/CaO. For La-doped CS/CaO, vast inhibition domains ranged within 4.15-4.70 and 5.82-8.05 mm against Escherichia coli while 4.15-5.20 and 6.65-13.10 mm against Staphylococcus aureus (S. aureus) at the least and maximum concentrations, correspondingly. In silico molecular docking studies suggested these nanocomposites of chitosan as possible inhibitors against the enoyl-acyl carrier protein reductase (FabI) from S. aureus.

Evaluation of sulfonated oxidized chitosan antifungal activity against Fusarium graminearum

Chitosan biomaterials are widely used in the biological area because of their broad-spectrum antibacterial activity. However, chitosan cannot be dissolved in a neutral solution, limiting its application in various fields seriously. In this study, water-soluble sulfonated oxidized chitosan (SOCS) with antifungal activity were prepared by oxidization and sulfonation. Its structure was clearly confirmed by spectroscopy data (FTIR, 1H NMR, ¹³C NMR) and elemental analysis. SEM images of OCS and SOCS revealed that there was a little curly and an irregular sheet-like morphologies on them which was attributed to the oxidation and sulfonation on CS. Moreover, the FTIR and NMR indicated that -OH on the CS was oxidized into -COOH on the OCS and -SO₃H groups on the SOCS. The EDS results of OCS and SOCS confirmed the presence of the oxygen element in OCS and the S element in SOCS. All studies confirmed the OCS and SOCS were synthesized successfully. Furthermore, the inhibitory activity of SOCS biocomposites against plant pathogenic fungi, (Fusarium graminearum), was investigated. The results showed that the SOCS have significant inhibitory effects on the mycelial growth of F. graminearum. The EC₅₀ value of SOCS against F. graminearum is 79.46 μg/mL. The research results presented above indicated that SOCS can be used as a candidate material for the control of plant pathogenic fungi, and can broaden the application of chitosan materials in plant protection and sustainable agriculture.Research highlightsSOCS showed better solubility in deionized water.The antifungal effect of SOCS dissolved in acetic acid was higher than that of CS dissolved in acetic acid.SOCS dissolved in water can cause an inhibitory effect on F. graminearum at lower concentrations.

Mechanical and antibacterial properties of ZnO/chitosan bio-composite films

In the current study, ZnO/chitosan bio-composite films were produced via solution-casting method. Two different ZnO powders, micrometer (d50 ≅ 1.5 μm) and nanometer sized (d50 ≅ 100 nm), were used to investigate the effect of ZnO particle size and concentration (0, 2, and 8% w/w of chitosan) on the mechanical and antibacterial properties of the ZnO/chitosan bio-composite films. The incorporation of the ZnO powders into the chitosan film resulted in an increase in the tensile strength (TS) and a decrease in the elongation at break (EB) values. Mechanical test results revealed that TS and EB properties were considerably affected (p < 0.05) by the concentration and particle size of the ZnO reinforcement. Disc diffusion method demonstrated good antibacterial activities of bio-composite films containing high amount of ZnO (8% w/w of chitosan) against Escherichia coli, Staphylococcus aureus, Klebsiella pneumoniae, and Bacillus subtilis. The growth-limiting effect of the films was more pronounced for S. aureus and K. pneumoniae. Due to enhanced TS and imparted antibacterial activity of the produced ZnO/chitosan bio-composite films, these materials are promising candidates for applications such as food packaging, wound dressing, and antibacterial coatings for various surfaces.

Innovative Antimicrobial Chitosan/ZnO/Ag NPs/Citronella Essential Oil Nanocomposite-Potential Coating for Grapes

New packaging materials based on biopolymers are gaining increasing attention due to many advantages like biodegradability or existence of renewable sources. Grouping more antimicrobials agents in the same packaging can create a synergic effect, resulting in either a better antimicrobial activity against a wider spectrum of spoilage agents or a lower required quantity of antimicrobials. In the present work, we obtained a biodegradable antimicrobial film that can be used as packaging material for food. Films based on chitosan as biodegradable polymer, with ZnO and Ag nanoparticles as filler/antimicrobial agents were fabricated by a casting method. The nanoparticles were loaded with citronella essential oil (CEO) in order to enhance the antimicrobial activity of the nanocomposite films. The tests made on Gram-positive, Gram-negative, and fungal strains indicated a broad-spectrum antimicrobial activity, with inhibition diameters of over 30 mm for bacterial strains and over 20 mm for fungal strains. The synergic effect was evidenced by comparing the antimicrobial results with chitosan/ZnO/CEO or chitosan/Ag/CEO simple films. According to the literature and our preliminary studies, these formulations are suitable as coating for fruits. The obtained nanocomposite films presented lower water vapor permeability values when compared with the chitosan control film. The samples were characterized by SEM, fluorescence and UV-Vis spectroscopy, FTIR spectroscopy and microscopy, and thermal analysis.