Polymeric Materials with Antibacterial Activity: A Review

Mussel-Inspired Sonochemical Nanocomposite Coating on Catheters for Prevention of Urinary Infections

Catheter-associated urinary tract infections are the most common hospital-acquired infections and cause patient discomfort, increased morbidity, and prolonged stays, altogether posing a huge burden on healthcare services. Colonization occurs upon insertion, or later by ascending microbes from the rich periurethral flora, and is therefore virtually unavoidable by medical procedures. Importantly, the dwell time is a significant risk factor for bacteriuria because it gives biofilms time to develop and mature. This is why we engineer antibacterial and antibiofilm coating through ultrasound- and nanoparticle-assisted self-assembly on silicone surfaces and validate it thoroughly in vitro and in vivo. To this end, we combine bimetallic silver/gold nanoparticles, which exercise both biocidal and structural roles, with dopamine-modified gelatin in a facile and substrate-independent sonochemical coating process. The latter mussel-inspired bioadhesive potentiates the activity and durability of the coating while attenuating the intrinsic toxicity of silver. As a result, our approach effectively reduces biofilm formation in a hydrodynamic model of the human bladder and prevents bacteriuria in catheterized rabbits during a week of placement, outperforming conventional silicone catheters. These results substantiate the practical use of nanoparticle-biopolymer composites in combination with ultrasound for the antimicrobial functionalization of indwelling medical devices.

Hydrogen-Bonding-Regulated Morphology Control and the Impact on the Antibacterial Activity of Cationic π-Amphiphiles

This manuscript describes the synthesis, self-assembly, and antibacterial properties of naphthalene-diimide (NDI)-derived cationic π-amphiphiles. Three such asymmetric NDI derivatives with a nonionic hydrophilic wedge and a guanidine group in the two opposite sides of the NDI chromophore were considered. They differ by a single functional group (hydrazide, amide, and ester for NDI-1, NDI-2, and NDI-3, respectively), located in the linker between the NDI and the hydrophilic wedge. For NDI-1, the H-bonding among the hydrazides regulated unilateral stacking and a preferential direction of curvature of the resulting supramolecular polymer, producing an unsymmetric polymersome with the guanidinium groups displayed at the outer surface. NDI-3, lacking any H-bonding group, exhibits π-stacking without any preferential orientation and generates spherical particles with a relatively poor display of the guanidium groups. In sharp contrast to NDI-1, NDI-2 exhibits an entangled one-dimensional (1D) fibrillar morphology, indicating the prominent role of the H-bonding motif of the amide group and flexibility of the linker. The antibacterial activity of these assemblies was probed against Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative). NDI-1 showed the most promising antibacterial activity with a minimum inhibitory concentration (MIC) of ∼7.8 μg/mL against S. aureus and moderate activity (MIC ∼ 125 μg/mL) against E. coli. In sharp contrast, NDI-3 did not show any significant activity against the bacteria, suggesting a strong impact of the H-bonding-regulated directional assembly. NDI-2, forming a fibrillar network, showed moderate activity against S. aureus and negligible activity against E. coli, highlighting a significant impact of the morphology. All of these three molecules were found to be compatible with mammalian cells from the 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl-tetrazolium bromide (MTT) and hemolysis assay. The mechanistic investigation by membrane polarization assay, live/dead fluorescence assay, and microscopy studies confirmed the membrane disruption mechanism of cell killing for the lead candidate NDI-1.

Parametric Production of Prostheses Using the Additive Polymer Manufacturing Technology Multi Jet Fusion

This study aims to develop a procedure for the production of 3D-printed forearm prostheses (especially hard outer sockets). The production procedure is designed in the form of a parametric workflow (CAD model), which significantly speeds up the designing process of the prosthesis. This procedure is not fixedly dependent on the software (SW) equipment and is fully transferable into another SW environment. The use of these prostheses will significantly increase the comfort of their patients' lives. It is possible to produce prostheses faster and in larger amounts and variants by the usage of additive technology. The input for the own production of the prosthesis is a model of the internal soft socket of the patient. This soft socket (soft bed) is made by a qualified prosthetist. A 3D-scanned CAD model is obtained afterward using the scanning method by an automatic laser projector. An editable, parametric external socket (modifiable in any CAD format) is generated from the obtained 3D scan using a special algorithmic model. This socket, after the necessary individual modifications, is transferred to 3D printing technology and produced using powder technology Multi Jet Fusion (HP MJF). The result of the designed and tested procedure is a quickly editable 3D-printed outer socket (main part of prosthesis), which is able to fully replace the current long-fiber composite solution. Production of current solutions is relatively time-consuming, and only one piece is produced in a given time. The newly designed technology eliminates this. This study summarized the possibilities of speeding up the production of forearm prostheses (but not only these) by creating a parametric CAD model that is applicable to different patients.

Novel fibrous Ag(NP) decorated clay-polymer composite: Implications in water purification contaminated with predominant micro-pollutants and bacteria

Due to the potential harm caused by emerging micro-pollutants to living organisms, contaminating water supplies by micro-pollutants like EDCs, pharmaceuticals, and microorganisms has become a concern in many countries. Considering both microbiological and micro-pollutant exposure risks associated with water use for agricultural/or household purposes, it is imperative to create a strategy for improving pollutant removal from treated wastewater that is both effective and affordable. Natural clay minerals efficiently remove contaminants from wastewater, though the pristine clay has less affinity to several organic pollutants. Hydrophilic polymers, viz., poly(ethylene glycol) (PEG), improve the dispersion of particles, flocculation processes, and surface properties. In this study, PEG grafted with attapulgite, thereby providing a high-specific surface-area, mesoporous materials for the adsorption of micro-pollutants like ciprofloxacin (CIP) and 17α-ethinylestradiol (EE2) at high rates. A gentle washing process regenerates the clay-polymer material several times with no performance loss, and the natural water implications show fair applicability of solid in decontaminating the CIP and EE2 in an aqueous medium. Further, greenly synthesized silver nanoparticles in situ disperse with the clay polymer efficiently remove the gram-positive and gram-negative bacterium viz., Bacillus subtilis, and Pseudomonas aeruginosa, which are commonly persistent in aquatic environments. The clay polymer outperformed a modified clay composite to eliminate microorganisms and organic micro-pollutants in significant quantities quickly. These results clearly show the importance of fibrous clay-polymer composite for water purification technologies.

Bactericidal Chitosan Derivatives and Their Superabsorbent Blends with ĸ-Carrageenan

The aim of this work is research dedicated to the search for new bactericidal systems for use in cosmetic formulations, dermocosmetics, or the production of wound dressings. Over the last two decades, chitosan, due to its special biological activity, has become a highly indispensable biopolymer with very wide application possibilities. Reports in the literature on the antibacterial effects of chitosan are very diverse, but our research has shown that they can be successfully improved through chemical modification. Therefore, in this study, results on the synthesis of new chitosan-based Schiff bases, dCsSB-SFD and dCsSB-PCA, are obtained using two aldehydes: sodium 4-formylbenzene-1,3-disulfonate (SFD) and 2-pyridine carboxaldehyde (PCA), respectively. Chitosan derivatives synthesized in this way demonstrate stronger antimicrobial activity. Carrying out the procedure of grafting chitosan with a caproyl chain allowed obtaining compatible blends of chitosan derivatives with κ-carrageenan, which are stable hydrogels with a high swelling coefficient. Furthermore, the covalently bounded poly(ε-caprolactone) (PCL) chain improved the solubility of obtained polymers in organic solvents. In this respect, the Schiff base-containing polymers obtained in this study, with special hydrogel and antimicrobial properties, are very promising materials for potential use as a controlled-release formulation of both hydrophilic and hydrophobic drugs in cosmetic products for skin health.

Slow-sculpting graphene oxide/alginate gel loaded with platelet-rich plasma to promote wound healing in rats

Wounds, especially chronic wounds, have become an important problem that endangers human health. At present, there are many repair methods, and among them combines materials science and biology is one of the important repair methods. This study explored the preparation method, physicochemical properties, biological activity and safety of Platelet-Rich plasma (PRP)-loaded slow-sculpting graphene oxide (GO)/alginate gel, and applied it to acute full-thickness skin defect wounds in rats to observe its role in wound healing. The results show that the slow-sculpting GO/alginate gel has excellent plasticity and is suitable for a variety of irregularly shaped wounds. At the same time, its porous structure and water content can maintain the activity of platelets and their released growth factors in PRP, thereby promoting wound collagen synthesis and angiogenesis to accelerate wound healing. This indicates that the slow-sculpting GO/alginate gel is an excellent loading material for PRP, and the combination of the two may become one of the methods to promote wound repair.

Multifunctional polylactic acid biocomposite film for active food packaging with UV resistance, antioxidant and antibacterial properties

Antibacterial packaging used to control the growth of microorganisms in food is of great value for prolonging the shelf life of food. In this study, a bio-based antibacterial agent PDI based on zwitterionic and stereochemical synergistic antibacterial was designed and synthesized, and it was simultaneously introduced into polylactic acid (PLA) matrix with antioxidant o-vanillin (oVL) and plasticizer glycerol (GL). A series of PLA/oVL/PDI composite membranes with antibacterial, antioxidant and anti-ultraviolet properties were prepared by solution casting method. The results showed that the mechanical properties of the composite film were significantly improved compared with pure PLA (tensile strength increased by 37 %, elongation at break increased by 209 %), which was mainly attributed to the microphase separation structure induced by synthetic bio-based antibacterial agent, which improved the mechanical strength of PLA matrix, and the hydrogen bond formed by glycerol, o-vanillin and carbonyl group in PLA molecules plasticized PLA matrix. At the same time, the antibacterial rate of PLA/oVL/PDI composite membrane against Escherichia coli and Staphylococcus aureus can reach >95 %. Packaging experiments showed that PLA/oVL/PDI series composite films could effectively extend the shelf life of fresh bananas and apples for 5 days, and had great application prospects in preservative food packaging.

Characteristics and Key Features of Antimicrobial Materials and Associated Mechanisms for Diverse Applications

Since the Fourth Industrial Revolution, three-dimensional (3D) printing has become a game changer in manufacturing, particularly in bioengineering, integrating complex medical devices and tools with high precision, short operation times, and low cost. Antimicrobial materials are a promising alternative for combating the emergence of unforeseen illnesses and device-related infections. Natural antimicrobial materials, surface-treated biomaterials, and biomaterials incorporated with antimicrobial materials are extensively used to develop 3D-printed products. This review discusses the antimicrobial mechanisms of different materials by providing examples of the most commonly used antimicrobial materials in bioengineering and brief descriptions of their properties and biomedical applications. This review will help researchers to choose suitable antimicrobial agents for developing high-efficiency biomaterials for potential applications in medical devices, packaging materials, biomedical applications, and many more.

Synthesis and characterization of magnetic Ag-Fe3O4@polymer hybrid nanocomposite systems with promising antibacterial application

INTRODUCTION

Bacterial infections caused by different strains of bacteria still one of the most important disorders affecting humans worldwide. Polymers nanocomposite systems could be considered as an alternative to conventional antibiotics to eradicate bacterial infections.

SIGNIFICANCE

In an attempt to enhance the antibacterial performance of silver and iron oxide nanoparticles, decrease their aggregation and toxicity, a polymeric hybrid nanocomposite system combining both nanoparticles is produced.

METHODS

Magnetic Ag-Fe3O4@polymer hybrid nanocomposites prepared using different polymers, namely polyethylene glycol 4000, ethyl cellulose, and chitosan were synthesized via wet impregnation and ball-milling techniques. The produced nanocomposites were tested for their physical properties and antibacterial activities.

RESULTS

XRD, FT-IR, VSM, and TEM results confirmed the successful preparation of hybrid nanocomposites. Hybrid nanocomposites have average crystallite sizes in the following order Ag-Fe3O4@CS (8.9 nm) < Ag-Fe3O4@EC (9.0 nm) < Ag-Fe3O4@PEG4000 (9.4 nm) and active surface area of this trend Ag-Fe3O4@CS (130.4 m2g-1) > Ag-Fe3O4@EC (128.9 m2g-1) > Ag-Fe3O4@PEG4000 (123.4 m2g-1). In addition, they have a saturation magnetization in this order: Ag-Fe3O4@PEG4000 (44.82 emu/g) > Ag-Fe3O4@EC (40.14 emu/g) > Ag-Fe3O4@CS (22.90 emu/g). Hybrid nanocomposites have a pronounced antibacterial action against Bacillus cereus, Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus intermedius compared to iron oxide nanoparticles and positive antibacterial drug. In addition, both Ag-Fe3O4@EC and Ag-Fe3O4@CS have a lower MIC values compared to Ag-Fe3O4@PEG and positive control.

CONCLUSION

Magnetic Ag-Fe3O4 hybrid nanocomposites could be promising antibacterial nanomaterials and could pave the way for the development of new materials with even more unique properties and applications.

Silk fibroin/polyvinyl alcohol composite film loaded with antibacterial AgNP/polydopamine-modified montmorillonite; characterization and antibacterial properties

In this study, a kind of nanocomposite film was fabricated via combining silk fibroin, polyvinyl alcohol (SF/PVA) and AgNP/polydopamine-modified Montmorillonite (AgNP/PDA-Mt). The structural characteristics and properties of the SF/PVA/AgNP/PDA-Mt nanocomposites films were identified using X-ray diffraction (XRD), Thermal gravimetric analyzer (TGA), Fourier transform infrared spectroscopy (FTIR), EDS-mapping analyses and Scanning electron microscope (SEM). The results indicated enhanced thermal performance of SF/PVA/AgNP/PDA-Mt nanocomposites with increased AgNP/PDA-Mt weight. The nanocomposite film exhibited excellent antibacterial activity against E. coli and S. aureus. The 2 % SF/PVA/AgNP/PDA-Mt film showed the highest zone of inhibition with an average inhibition circle diameter of 26.1 mm against E. coli and 20.61 mm against S. aureus. Cytotoxicity test results indicated that the nanocomposites films were biocompatible with L929 cells with a 100 % survival rate, which can be considered as one of the advantages of new nanocomposites films. These findings suggest that SF/PVA/AgNP/PDA-Mt films have potential clinical applications in wound dressing and antibacterial biomedical applications.

[Progress in antibacterial/osteogenesis dual-functional surface modification strategy of titanium-based implants]

Objective

To review antibacterial/osteogenesis dual-functional surface modification strategy of titanium-based implants, so as to provide reference for subsequent research.

Methods

The related research literature on antibacterial/osteogenesis dual-functional surface modification strategy of titanium-based implants in recent years was reviewed, and the research progress was summarized based on different kinds of antibacterial substances and osteogenic active substances.

Results

At present, the antibacterial/osteogenesis dual-functional surface modification strategy of titanium-based implants includes: ① Combined coating strategy of antibiotics and osteogenic active substances. It is characterized in that antibiotics can be directly released around titanium-based implants, which can improve the bioavailability of drugs and reduce systemic toxicity. ② Combined coating strategy of antimicrobial peptides and osteogenic active substances. The antibacterial peptides have a wide antibacterial spectrum, and bacteria are not easy to produce drug resistance to them. ③ Combined coating strategy of inorganic antibacterial agent and osteogenic active substances. Metal ions or metal nanoparticles antibacterial agents have broad-spectrum antibacterial properties and various antibacterial mechanisms, but their high-dose application usually has cytotoxicity, so they are often combined with substances that osteogenic activity to reduce or eliminate cytotoxicity. In addition, inorganic coatings such as silicon nitride, calcium silicate, and graphene also have good antibacterial and osteogenic properties. ④ Combined coating strategy of metal organic frameworks/osteogenic active substances. The high specific surface area and porosity of metal organic frameworks can effectively package and transport antibacterial substances and bioactive molecules. ⑤ Combined coating strategy of organic substances/osteogenic active substancecs. Quaternary ammonium compounds, polyethylene glycol, N-haloamine, and other organic compounds have good antibacterial properties, and are often combined with hydroxyapatite and other substances that osteogenic activity.

Conclusion

The factors that affect the antibacterial and osteogenesis properties of titanium-based implants mainly include the structure and types of antibacterial substances, the structure and types of osteogenesis substances, and the coating process. At present, there is a lack of clinical verification of various strategies for antibacterial/osteogenesis dual-functional surface modification of titanium-based implants. The optimal combination, ratio, dose-effect mechanism, and corresponding coating preparation process of antibacterial substances and bone-active substances are needed to be constantly studied and improved.

Preparation of grafted starch by IPDI coupling and its antibacterial properties

Antibacterial acetate grafted starch (AGS) was synthesized by isophorone diisocyanate (IPDI) coupling acetate esterified starch (AST) and the antimicrobial agent polyhexamethyleneguanidine hydrochloride (PHMG), and the antimicrobial properties of AGS were evaluated. The process parameters of AGS were: IPDI reacted with PHMG at 120 °C for 1 h, then, reacted with starch at 60 °C for 3 h. The grafting yield of PHMG and starch reached 28.43%. The Fourier transform infrared spectroscopy (FTIR) and Nuclear magnetic resonance (1H NMR) showed that the binding of IPDI to PHMG was successfully grafted on the AS. The antibacterial effect of AGS was investigated. AGS produced inhibition zones and confirmed its significant inhibitory effect on Escherichia coli and Staphylococcus aureus, as the grafting yield increased, the inhibition effect on bacteria became stronger. When the grafting yield was 28.43%, the inhibition rate of AGS was 90.24% for Escherichia coli. and 94.45% for Staphylococcus aureus. The experiments of water washing showed that after AGS was washed 10 times with water, the inhibition rate of AGS to E. coli. only reduced 3.04% and that of S. aureus 2.95%, indicating that the combination of PHMG and starch was stable and the inhibition effect was long-lasting, AGS has huge potential to be developed into antibacterial material.

Drug-Loaded Konjac Glucomannan/Metal-Organic Framework Composite Hydrogels as Antibacterial and Anti-Inflammatory Cell Scaffolds

Bacterial infections severely threaten human health; therefore, it is important to endow the matrix for tissue engineering with antibacterial efficiency. The loading of antibacterial drugs on nanomaterials provides an efficient strategy to realize synergistic antibacterial efficiency. By depositing various metal-organic frameworks, such as UIO-66, onto konjac glucomannan (KGM), composite hydrogels (KGM/UIO-66) were created. These hydrogels were used as drug carriers, enabling the development of antibacterial hydrogels with high drug loading capacities (e.g., the maximum loading amount of pterostilbene on KGM/UIO-66 reached 0.157 mg/mg) and sustained drug release. The resulting KGM/UIO-66/pterostilbene hydrogel exhibited a three-dimensional porous structure, excellent biocompatibility, antibacterial efficiency, and anti-inflammatory activity. It effectively protected cells from bacterial attacks while ensuring cell adhesion and proliferation, demonstrating great potential as a three-dimensional substrate for biomedical applications, including tissue engineering and regenerative medicine.

Current antibacterial agents in dental bonding systems: a comprehensive overview

Dental caries is mainly caused by oral biofilm acid, and the most common dental restoration treatment is composite dental restorations. The main cause of failure is secondary caries adjacent to the restoration. Long-term survival of dental materials is improved by the presence of antibacterial agents, which selectively inhibit bacterial growth or survival. Chemical, natural and biomaterials have been studied for their antimicrobial activities and antibacterial bonding agents have been improved. Their usage has been increased to inhibit the growth of invading and residual bacteria in the oral cavity, as biofilm accumulation increases the risk of treatment failure. In this article, the success and applications of antibacterial agents are discussed in dental bonding systems.

Intrinsically Disordered Synthetic Polymers in Biomedical Applications

In biology and medicine, intrinsically disordered synthetic polymers bio-mimicking intrinsically disordered proteins, which lack stable three-dimensional structures, possess high structural/conformational flexibility. They are prone to self-organization and can be extremely useful in various biomedical applications. Among such applications, intrinsically disordered synthetic polymers can have potential usage in drug delivery, organ transplantation, artificial organ design, and immune compatibility. The designing of new syntheses and characterization mechanisms is currently required to provide the lacking intrinsically disordered synthetic polymers for biomedical applications bio-mimicked using intrinsically disordered proteins. Here, we present our strategies for designing intrinsically disordered synthetic polymers for biomedical applications based on bio-mimicking intrinsically disordered proteins.

Bioactive Materials Based on Hydroxypropyl Methylcellulose and Silver Nanoparticles: Structural-Morphological Characterization and Antimicrobial Testing

The progress achieved in recent years in the biomedical field justifies the objective evaluation of new techniques and materials obtained by using silver in different forms as metallic silver, silver salts, and nanoparticles. Thus, the antibacterial, antiviral, antifungal, antioxidant, and anti-inflammatory activity of silver nanoparticles (AgNPs) confers to newly obtained materials characteristics that make them ideal candidates in a wide spectrum of applications. In the present study, the use of hydroxypropyl methyl cellulose (HPMC) in the new formulation, by embedding AgNPs with antibacterial activity, using poly(N-vinylpyrrolidone) (PVP) as a stabilizing agent was investigated. AgNPs were incorporated in HPMC solutions, by thermal reduction of silver ions to silver nanoparticles, using PVP as a stabilizer; a technique that ensures the efficiency and selectivity of the obtained materials. The rheological properties, morphology, in vitro antimicrobial activity, and stability/catching of Ag nanoparticles in resulting HPMC/PVP-AgNPs materials were evaluated. The obtained rheological parameters highlight the multifunctional roles of PVP, focusing on the stabilizing effect of new formulations but also the optimization of some properties of the studied materials. The silver amount was quantified using the spectroscopy techniques (energy-dispersive X-ray fluorescence (XRF), energy-dispersive X-ray spectroscopy (EDX)), while formation of the AgNPs was confirmed using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM), and dynamic light scattering (DLS). Also, the morphological examination (Atomic Force Microscopy (AFM) and Scanning electron microscopy (SEM)) by means of the texture roughness parameters has evidenced favorable characteristics for targeted applications. Antibacterial activity was tested against Escherichia coli and Staphylococcus aureus and was found to be substantially improved was silver was added in the studied systems.

Evaluation of the Antibacterial Properties of Polyvinyl Alcohol-Pullulan Scaffolds Loaded with Nepeta racemosa Lam. Essential Oil and Perspectives for Possible Applications

Essential oil of Nepeta racemosa Lam. was extracted and characterized to determine its antimicrobial activity and potential use in applications. The essential oil was loaded on polyvinyl alcohol-pullulan films and gels and characterized by optical microscopy, scanning electron microscopy, and UV-Vis spectroscopy before having its antimicrobial capacities assessed. The essential oil extracted from Nepeta racemosa Lam. was characterized using gas chromatography coupled with mass spectroscopy, which indicated that the most abundant component was nepetalic acid (55.5%), followed by eucalyptol (10.7%) and other compounds with concentrations of about 5% or less. The essential oil, as well as the loaded films and gels, exhibited good antibacterial activity on both gram-positive and gram-negative strains, with growth inhibition zones larger in some cases than for gentamicin, indicating excellent premises for using these essential-oil-loaded materials for applications in the food industry or biomedicine.

Influence of Herbal Fillers Addition on Selected Properties of Silicone Subjected to Accelerated Aging

This work aims to assess the impact of the type and percentage of powdered herbs on selected properties of silicone-based composites. The matrix was an addition cross-linked platinum-cured polydimethylsiloxane. The fillers were powdered thyme and sage, which were introduced at 5, 10, and 15 wt.%. The introduced fillers differed in composition, morphology, and grain size. The grain morphology showed differences in the size and shape of the introduced fillers. The qualitative and quantitative assessment resulting from the incorporation was conducted based on tests of selected properties: density, wettability, rebound resilience, hardness, and tensile strength. The incorporation slightly affected the density and wettability of the silicone. Rebound resilience and hardness results differed depending on the filler type and fraction. However, tensile strength decreased, which may be due to the matrix's distribution of fillers and their chemical composition. Antibacterial activity evaluation against S. aureus proved the bacteriostatic properties of the composites. Accelerated aging in PBS solution further deteriorated the mechanical properties. FTIR and DSC have demonstrated the progressive aging of the materials. In addition, the results showed an overall minimal effect of fillers on the silicone chemical backbone and melting temperature. The developed materials can be used in applications that do not require high mechanical properties.

Surface Functionalization of Ti6Al4V-ELI Alloy with Antimicrobial Peptide Nisin

Implant-associated infections are a severe global concern, especially in the case of orthopedic implants intended for long-term or permanent use. The traditional treatment through systemic antibiotic administration is often inefficient due to biofilm formation, and concerns regarding the development of highly resistant bacteria. Therefore, there is an unfulfilled need for antibiotic-free alternatives that could simultaneously support bone regeneration and prevent bacterial infection. This study aimed to perform, optimize, and characterize the surface functionalization of Ti6Al4V-ELI discs by an FDA-approved antimicrobial peptide, nisin, known to hold a broad antibacterial spectrum. Accordingly, nisin bioactivity was also evaluated by in vitro release tests both in physiological and inflammatory pH conditions. Several methods, such as X-ray photoelectron spectroscopy (XPS), and Kelvin Probe atomic force microscopy confirmed the presence of a physisorbed nisin layer on the alloy surface. The functionalization performed at pH 6-7 was found to be especially effective due to the nisin configuration exposing its hydrophobic tail outwards, which is also responsible for its antimicrobial action. In addition, the first evidence of gradual nisin release both in physiological and inflammatory conditions was obtained: the static contact angle becomes half of the starting one after 7 days of soaking on the functionalized sample, while it becomes 0° on the control samples. Finally, the evaluation of the antibacterial performance toward the pathogen Staphylococcus aureus after 24 h of inoculation showed the ability of nisin adsorbed at pH 6 to prevent bacterial microfouling into biofilm-like aggregates in comparison with the uncoated specimens: viable bacterial colonies showed a reduction of about 40% with respect to the un-functionalized surface and the formation of (microcolonies (biofilm-like aggregates) is strongly affected.

Comparative Experimental Investigation of Biodegradable Antimicrobial Polymer-Based Composite Produced by 3D Printing Technology Enriched with Metallic Particles

Due to the prevailing existence of the COVID-19 pandemic, novel and practical strategies to combat pathogens are on the rise worldwide. It is estimated that, globally, around 10% of hospital patients will acquire at least one healthcare-associated infection. One of the novel strategies that has been developed is incorporating metallic particles into polymeric materials that neutralize infectious agents. Considering the broad-spectrum antimicrobial potency of some materials, the incorporation of metallic particles into the intended hybrid composite material could inherently add significant value to the final product. Therefore, this research aimed to investigate an antimicrobial polymeric PLA-based composite material enhanced with different microparticles (copper, aluminum, stainless steel, and bronze) for the antimicrobial properties of the hybrid composite. The prepared composite material samples produced with fused filament fabrication (FFF) 3D printing technology were tested for different time intervals to establish their antimicrobial activities. The results presented here depict that the sample prepared with 90% copper and 10% PLA showed the best antibacterial activity (99.5%) after just 20 min against different types of bacteria as compared to the other samples. The metallic-enriched PLA-based antibacterial sheets were remarkably effective against Staphylococcus aureus and Escherichia coli; therefore, they can be a good candidate for future biomedical, food packaging, tissue engineering, prosthetic material, textile industry, and other science and technology applications. Thus, antimicrobial sheets made from PLA mixed with metallic particles offer sustainable solutions for a wide range of applications where touching surfaces is a big concern.

Polylactide Perspectives in Biomedicine: From Novel Synthesis to the Application Performance

The incessant developments in the pharmaceutical and biomedical fields, particularly, customised solutions for specific diseases with targeted therapeutic treatments, require the design of multicomponent materials with multifunctional capabilities. Biodegradable polymers offer a variety of tailored physicochemical properties minimising health adverse side effects at a low price and weight, which are ideal to design matrices for hybrid materials. PLAs emerge as an ideal candidate to develop novel materials as are endowed withcombined ambivalent performance parameters. The state-of-the-art of use of PLA-based materials aimed at pharmaceutical and biomedical applications is reviewed, with an emphasis on the correlation between the synthesis and the processing conditions that define the nanostructure generated, with the final performance studies typically conducted with either therapeutic agents by in vitro and/or in vivo experiments or biomedical devices.

The first selenium containing chitin and chitosan derivatives: Combined synthetic, catalytic and biological studies

Ultrasonic approach to the synthesis of the first selenium-containing derivatives of chitin and chitosan has been developed. The synthetic procedure is simple, provides high yields, does not require harsh conditions, and uses water as the reaction medium. The elaborated chitin and chitosan derivatives and their based nanoparticles are non-toxic and possess high antibacterial and antifungal activity. Their antimicrobial activity exceeds the effect of the classic antibiotics (Ampicillin and Gentamicin) and the antifungal drug Amphotericin B. The obtained selenium-containing cationic chitin and chitosan derivatives exhibit a high transfection activity and are promising gene delivery vectors. Nanoparticles of the synthesized polymers are highly efficient catalysts for the oxidation of 1-phenylethyl alcohol to acetophenone by bromine at room temperature.

Fabrication of ZnO@Plant Polyphenols/Cellulose as Active Food Packaging and Its Enhanced Antibacterial Activity

To investigate the efficient use of bioresources and bioproducts, plant polyphenol (PPL) was extracted from larch bark and further applied to prepare ZnO@PPL/Cel with cellulose to examine its potential as an active package material. The structure and morphology were fully characterized by XRD, SEM, FTIR, XPS and Raman spectra. It was found that PPL is able to cover ZnO and form a coating layer. In addition, PPL cross-links with cellulose and makes ZnO distribute evenly on the cellulose fibers. Coating with PPL creates a pinecone-like morphology in ZnO, which is constructed by subunits of 50 nm ZnO slices. The interactions among ZnO, PPL and cellulose have been attributed to hydrogen bonding, which plays an important role in guiding the formation of composites. The antibacterial properties against Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) were tested by the inhibition zone method. Our composite ZnO@PPL/Cel has superior antibacterial activity compared to ZnO/Cel. The antibacterial mechanism has also been elaborated on. The low cost, simple preparation method and good performance of ZnO@PPL/Cel suggest the potential for it to be applied as active food packaging.

Polyisocyanide Quaternary Ammonium Salts with Exceptionally Star-Shaped Structure for Enhanced Antibacterial Properties

The development of non-polluting and non-hazardous polymeric antimicrobial agents has become a hot issue in current research and development. Among them, polymer quaternary ammonium salts are thought to be one of the most promising materials for antibacterial efficacy. Here, we present an efficient strategy for synthesizing polyisocyanide quaternary ammonium salts (PQASs) with a novel star-shaped structure. Benefitting from the novel structure, increased cation density and enhanced water solubility, the prepared star polyisocyanide quaternary ammonium salts (S-PQASs) exhibit excellent antibacterial properties against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). In particular, S-POcQAS-M₅₀ (where M stands for isonitrile monomer and 50 stands for the initial feeding ratio) showed the best antimicrobial activity with minimum inhibitory concentration (MIC) of 17 and 20 µg/mL against E. coli and S. aureus, respectively. It was also found that the unique star-shaped structure can give QASs with improved antimicrobial performance compared with our previously prepared linear quaternary ammonium salts (L-PQASs). These results demonstrated that the antibacterial activity of QASs is closely related to its structure. This work provides an idea for the design of efficient polymeric antimicrobial agents.

Recent trends and advances in polyindole-based nanocomposites as potential antimicrobial agents: a mini review

Infections caused by multi-drug resistant microbes are a big challenge to the medical field and it necessitates the need for new biomedical agents that can act as potential candidates against these pathogens. Several polyindole based nanocomposites were found to exhibit the ability to release reactive oxygen species (ROS) and hence they show excellent antimicrobial properties. The features of polyindole can be fine-tuned to make them potential alternatives to antibiotics and antifungal medicines. This review clearly portrays the antimicrobial properties of polyindole based nanocomposites, reported so far for biomedical applications. This review will give a clear insight into the scope and possibilities for further research on the biomedical applications of polyindole based nanocomposites.

Comparable Studies on Nanoscale Antibacterial Polymer Coatings Based on Different Coating Procedures

The antibacterial activity of different antibiotic and metal-free thin polymer coatings was investigated. The films comprised quaternary ammonium compounds (QAC) based on a vinyl benzyl chloride (VBC) building block. Two monomeric QAC of different alkyl chain lengths were prepared, and then polymerized by two different polymerization processes to apply them onto Ti surfaces. At first, the polymeric layer was generated directly on the surface by atom transfer radical polymerization (ATRP). For comparison purposes, in a classical route a copolymerization of the QAC-containing monomers with a metal adhesion mediating phosphonate (VBPOH) monomers was carried out and the Ti surfaces were coated via drop coating. The different coatings were characterized by X-ray photoelectron spectroscopy (XPS) illustrating a thickness in the nanomolecular range. The cytocompatibility in vitro was confirmed by both live/dead and WST-1 assay. The antimicrobial activity was evaluated by two different assays (CFU and BTG, resp.,), showing for both coating processes similar results to kill bacteria on contact. These antibacterial coatings present a simple method to protect metallic devices against microbial contamination.

Biosafety chemistry and biosafety materials: a new perspective to solve biosafety problems

The Novel Coronavirus Disease (COVID-19) has rapidly swept around the globe since its first emergence near 2020. However, people have failed to fully understand its origin or mutation. Defined as an international biosafety incident, COVID-19 has again encouraged worldwide attention to reconsider the importance of biosafety due to the adverse impact on personal well-being and social stability. Most countries have already taken measures to advocate progress in biosafety-relevant research, aiming to prevent and solve biosafety problems with more advanced techniques and products. Herein, we propose a new concept of biosafety chemistry and reiterate the notion of biosafety materials, which refer to the interdisciplinary integration of biosafety and chemistry or materials. Here, we attempt to illustrate the exquisite association that chemistry and material science possess with biosafety fields and we hope to provide a pragmatic perspective on approaches to utilize the knowledge of these two subjects to handle specific biosafety issues such as detection and disinfection of pathogenic microorganisms, personal and collective protective equipment, vaccine adjuvants and specific drugs, preservation of biogenetic resources for human, animals, and plants. In addition, we hope to convey and promote the idea of multidisciplinary cooperation to strengthen biosafety research and development of relevant products for establishing possibly specific majors to defend national security in the future.