Effect of Rot-, Fire-, and Water-Retardant Treatments on Jute Fiber and Their Associated Thermoplastic Composites: A Study by FTIR

PSf Membrane-Impregnated Jute-Copper Nanocomposite as Highly Efficient Dye Removal Material

Water pollution, driven by the discharge of dyes from industrial processes, poses a significant environmental and health hazard worldwide. Methylene blue, a common dye, constitutes particular concern due to its persistence and toxicity. Conventional wastewater treatment methods often struggle to effectively remove such contaminants. In this study, we introduce a novel approach utilizing a polysulfone-based composite membrane incorporating pretreated jute fibers and copper nanoparticles for the removal of methylene blue from aqueous solutions. The pretreated jute fibers undergo alkali and hydrogen peroxide treatments to enhance their adsorption capabilities, while copper nanoparticles are incorporated into the membrane to bolster its antimicrobial properties. Through comprehensive characterization techniques, including Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), dynamic light scattering (DLS), and scanning electron microscopy (SEM), we confirm the structural and chemical properties of the composite membranes. Batch adsorption studies reveal the superior performance of the composite membrane compared with individual components. Specifically, at lower methylene blue concentrations (∼20 ppm), the composite membrane demonstrates a remarkable percent removal value of about 97%, while at higher concentrations (∼100 ppm), the percent removal remains substantial at 85%. Additionally, desorption studies elucidate the retention capacity of the adsorbed dye, indicating the feasibility of the composite membrane for practical applications in wastewater treatment. These findings underscore the potential of nanocomposite-fiber membranes as sustainable and cost-effective solutions for mitigating water pollution. By harnessing advancements in nanotechnology and materials science, the presented innovative composite membranes could offer promising avenues for addressing water pollution challenges and promoting environmental sustainability.

Impact of Polylactic Acid Fibers in Cellulose Nonwoven Mulch Blends on Biodegradability and Performance-An Open Field Study

The performance and degradation of nonwoven mulches made from viscose, jute, hemp fibers, and their blends with PLA fibers, subjected to field conditions, are investigated. This research explores the possible substitution of traditional agricultural polyethylene mulching agro foil with environmentally friendly biodegradable nonwoven mulches produced from blends of jute, hemp, and viscose fibers along with PLA fibers. The nonwoven mulches underwent a ten-month exposure to field conditions, showing varied degradation. The jute and hemp nonwoven mulches degraded completely within the test period, whereas their blends with PLA fibers exhibited slowed degradation. This study indicated that PLA fibers in blends with jute, hemp, and viscose mulches slowed degradation, impacting their structural integrity and tensile properties. The tensile properties of nonwoven mulches blended with 20% of PLA fibers increased the breaking forces after field exposure. Observations on structural changes through microscopy highlighted the structure maintenance in jute and hemp blends due to the non-degraded PLA fibers, contrasting the complete degradation of 100% jute and hemp mulches. A microscopic analysis revealed alterations in the fiber structure and density changes, particularly in viscose mulches and their blends with PLA fibers. Soil temperature variations were observed under different mulches; e.g., agro foil consistently exhibited higher temperatures compared to nonwoven mulches. Notably, the hemp and jute/PLA blend mulches showed slightly elevated temperatures, while the viscose-based mulches consistently revealed the lowest temperatures. Regarding soil moisture, the nonwoven mulches generally maintained higher moisture levels compared to the control field and agro foil from June to October. These findings suggest that nonwoven mulches effectively preserved soil moisture during critical growth periods, potentially positively impacting plant growth. The weed suppression capabilities varied among mulches, with hemp mulch initially displaying the lowest suppression ability in the first six months. The addition of 20% of PLA fibers in mulch blends with viscose, jute, and hemp notably improved the weed control capabilities. Understanding the impacts of field conditions on newly produced nonwoven mulches is crucial for optimizing mulch selection in agricultural practices to enhance soil conditions and weed management.

Assessment of Hydrothermal Treatment Effects on Coir Fibers for Incorporation into Polyurethane Matrix Biocomposites Derived from Castor Oil

The incorporation of natural lignocellulosic fibers as reinforcements in polymer composites has witnessed significant growth due to their biodegradability, cost-effectiveness, and mechanical properties. This study aims to evaluate castor-oil-based polyurethane (COPU), incorporating different contents of coconut coir fibers, 5, 10, and 15 wt%. The investigation includes analysis of the physical, mechanical, and microstructural properties of these composites. Additionally, this study evaluates the influence of hydrothermal treatment on the fibers, conducted at 120 °C and 98 kPa for 30 min, on the biocomposites' properties. Both coir fibers (CFs) and hydrothermal-treated coir fibers (HTCFs) were subjected to comprehensive characterization, including lignocellulosic composition analysis, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The biocomposites were subjected to water absorption analysis, bending tests, XRD, SEM, FTIR, and TGA. The results indicate that the 30 min hydrothermal treatment reduces the extractive content, enhancing the interfacial adhesion between the fiber and the matrix, as evidenced by SEM. Notably, the composite containing 5 wt% CF exhibits a reduced water absorption, approaching the level observed in pure COPU. The inclusion of 15 wt% HTCF results in a remarkable improvement in the composite's flexural strength (100%), elastic modulus (98%), and toughness (280%) compared to neat COPU. TGA highlights that incorporating CFs into the COPU matrix enhances the material's thermal stability, allowing it to withstand temperatures of up to 500 °C. These findings underscore the potential of CFs as a ductile, lightweight, and cost-effective reinforcement in COPU matrix biocomposites, particularly for engineering applications.

Performance and Degradation of Nonwoven Mulches Made of Natural Fibres and PLA Polymer-Open Field Study

The need for sustainable alternatives to conventional plastic mulches in agriculture has led to the development of various types of biodegradable mulches made from natural fibres and biopolymers to reduce environmental pollution and mitigate soil pollution caused by conventional plastic mulch usage. Degradation, impact on soil temperature and humidity, and weed suppression properties of needle-punched nonwoven mulches of different mass per unit area, made of jute, hemp, viscose, and PLA biopolymer, are investigated. Their biodegradation is determined by changes in the mulch properties (mass per unit area, thickness, air permeability, tensile properties, microscopic images, and FTIR analyses) during 300 days of exposure to the environmental conditions in the period from May 2022 to February 2023. The change in mass per unit area, thickness, air permeability, and tensile properties of nonwoven mulches did not show a tendency to degrade during exposure to environmental conditions. The microscopic and FTIR analysis showed the degradation of the fibres from the mulches during the exposure time to a certain extent. The environmental conditions influence the change in the dimensions of the mulches (shrinkage and expansion)-which impact periodically tested mass results per unit area-as well as their thickness and air permeability. The nonwoven mulches provide higher temperatures compared to bare soil, though not as high as those observed beneath traditional agricultural foil. When comparing the humidity in bare soil and soil covered by mulches during the plant growth period (June to October), it was found that soil humidity was higher beneath all mulches. The nonwoven mulches provide superior soil moisture retention compared to conventionally used agrofoil. Almost all nonwoven mulches effectively suppressed weed growth, except hemp mulches. The newly produced mulches have the potential to replace traditional agrofoil, offering improved conditions for plant growth, effective weed control, and faster degradation without causing harm to the environment.

Biodegradation Properties of Cellulose Fibers and PLA Biopolymer

This paper investigates the biodegradation properties of cellulose fibers and PLA biopolymer. For that purpose, hemp, jute, and sisal fibers as lignocellulose fibers; viscose fibers (CV) as regenerated cellulose; and polylactide (PLA) as biopolymer were buried in farmland soil for periods of 2, 4, 7, 9 and 11 days under controlled conditions. The influence of their biodegradation on the fiber mechanical properties, bacteria and fungi population, as well as on the soil quality were investigated. After exposure to microorganisms, analyses of the fibers' morphological (SEM), chemical (FTIR), and thermal (TGA) properties were conducted to achieve a comprehensive understanding of their biodegradability. The analysis concluded that lignin and pectin content have a greater impact on the biodegradation of hemp, jute, and sisal fibers than factors like crystallinity and degree of polymerization. The viscose fibers showed lower biodegradability despite their lower degree of polymerization, indicating a resistance to biodegradation due to the "skin" formed during the spinning process. PLA fibers experienced chemical hydrolysis and significant microbial attack, resulting in reduced tenacity. The acquired findings yield valuable insights into the biodegradability of the fibers, thereby facilitating the selection of appropriate fibers for the development of environmentally sustainable products. Notably, a literature review revealed a paucity of research on fiber biodegradability, underscoring the significance of the present study's contributions.

Assessing Mechanical Properties of Jute, Kenaf, and Pineapple Leaf Fiber-Reinforced Polypropylene Composites: Experiment and Modelling

The application of natural fibers is increasing rapidly in the polymer-based composites. This study investigates manufacturing and characterization of polypropylene (PP) based composites reinforced with three different natural fibers: jute, kenaf, and pineapple leaf fiber (PALF). In each case, the fiber weight percentages were varied by 30 wt.%, 35 wt.%, and 40 wt.%. Mechanical properties such as tensile, flexural, and impact strengths were determined by following the relevant standards. Fourier transform infrared (FTIR) spectroscopy was employed to identify the chemical interactions between the fiber and the PP matrix material. Tensile strength and Izod impact strength of the composites significantly increased for all the composites with different fiber contents when compared to the pure PP matrix. The tensile moduli of the composites were compared to the values obtained from two theoretical models based on the modified "rule of mixtures" method. Results from the modelling agreed well with the experimental results. Tensile strength (ranging from 43 to 58 MPa), flexural strength (ranging from 53 to 67 MPa), and impact strength (ranging from 25 to 46 kJ/m²) of the composites significantly increased for all the composites with different fiber contents when compared to the pure PP matrix having tensile strength of 36 MPa, flexural strength of 53 Mpa, and impact strength of 22 kJ/m². Furthermore, an improvement in flexural strength but not highly significant was found for majority of the composites. Overall, PALF-PP displayed better mechanical properties among the composites due to the high tensile strength of PALF. In most of the cases, T₉₈ (degradation temperature at 98% weight loss) of the composite samples was higher (532-544 °C) than that of 100% PP (500 °C) matrix. Fractured surfaces of the composites were observed in a scanning electron microscope (SEM) and analyses were made in terms of fiber matrix interaction. This comparison will help the researcher to select any of the natural fiber for fiber-based reinforced composites according to the requirement of the final product.

Current Development and Future Perspective on Natural Jute Fibers and Their Biocomposites

The increasing trend of the use of synthetic products may result in an increased level of pollution affecting both the environment and living organisms. Therefore, from the sustainability point of view, natural, renewable and biodegradable materials are urgently needed to replace environmentally harmful synthetic materials. Jute, one of the natural fibers, plays a vital role in developing composite materials that showed potential in a variety of applications such as household, automotive and medical appliances. This paper first reviews the characterization and performance of jute fibers. Subsequently, the main focus is shifted towards research advancements in enhancing physical, mechanical, thermal and tribological properties of the polymeric materials (i.e., synthetic or biobased and thermoplastic or thermoset plastic) reinforced with jute fibers in a variety of forms such as particle, short fiber or woven fabric. It is understood that the physio-mechanical properties of jute-polymer composites largely vary based on the fiber processing and treatment, fiber shape and/or size, fabrication processes, fiber volume fraction, layering sequence within the matrix, interaction of the fiber with the matrix and the matrix materials used. Furthermore, the emerging research on jute fiber, such as nanomaterials from jute, bioplastic packaging, heavy metal absorption, electronics, energy device or medical applications and development of jute fiber composites with 3D printing, is explored. Finally, the key challenges for jute and its derivative products in gaining commercial successes have been highlighted and potential future directions are discussed.

ABS/Silicon Dioxide Micro Particulate Composite from 3D Printing Polymeric Waste

In this paper, Acrylonitrile-Butadiene-Styrene matrix composites reinforced with Nano-silica dioxide particles were examined and prepared to study their mechanical properties. The composite sheets were pre-prepared using the hot extrusion process. Due to its wide characteristics, silica dioxide additions can strengthen the usability and mechanical features of composite thermoplastics and polymers. Furthermore, introducing silica dioxide as a filler in various attributes can help to maintain the smooth flow of sufficient powders, reduce caking, and manage viscoelasticity. Despite its advantages, 3D printing generates a significant amount of waste due to limited prints or destroyed support structures. ABS is an ideal material to use because it is a thermoplastic and amorphous polymer with outstanding thermal properties that is also applicable with the FFF (Fused Filament Fabrication) technique. The findings showed that increasing the silica dioxide content reduces the tensile strength to 22.4 MPa at 10 wt%. Toughness, ductility, and yield stress values of ABS/silica dioxide composites at 15 wt% increased, indicating that the composite material reinforced by the silica dioxide particles improved material characteristics. It is essential to consider the impact of recycling in polymer reinforcement with fillers. Furthermore, the improved mechanical qualities of the composite material encourages successful ABS recycling from 3D printing, as well as the possibility of reusing it in a similar application.

The effect of surface treatments and graphene-based modifications on mechanical properties of natural jute fiber composites: A review

Natural fiber reinforced composites (FRC) are of great interests, because of their biodegradability, recyclability, and environmental benefits over synthetic FRC. Natural jute FRC could provide an environmentally sustainable, light weight, and cost-effective alternative to synthetic FRC. However, the application of natural jute FRC is limited because of their poor mechanical and interfacial properties. Graphene and its derivatives could potentially be applied to modify jute fiber surface for manufacturing natural FRC with excellent mechanical properties, and lower environmental impacts. Here, we review the physical and chemical treatments, and graphene-based modifications of jute fibers, and their effect on mechanical properties of jute FRC. We introduce jute fiber structure, chemical compositions, and their potential applications first. We then provide an overview of various surface treatments used to improve mechanical properties of jute FRC. We discuss and compare various graphene derivative-based surface modifications of jute fibers, and their impact on the performance of FRC. Finally, we provide our future perspective on graphene-based jute fibers research to enable next generation strong and sustainable FRC for high performance engineering applications without conferring environmental problems.