1
|
Hamieda SF, Reffaee A, Saied M. Biophysical studies of modified PVC sheet based on sunflower oil for antistatic and blood bags applications. Sci Rep 2024; 14:13051. [PMID: 38844516 PMCID: PMC11156637 DOI: 10.1038/s41598-024-62709-5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/14/2024] [Accepted: 05/21/2024] [Indexed: 06/09/2024] Open
Abstract
In this work, the surface of polyvinyl chloride PVC sheet was modified by blending it with sunflower seed oil SSO to obtain PVC sheet/SSO films of ratios 100/0, 90/10, 80/20, 70/30, 60/40, and 50/50 (v/v)% using the solution casting method. Various techniques were used to characterize the prepared films, besides the use of hemolysis assays and blood clot formation tests. FTIR spectra revealed that there was a good interaction between the PVC sheet and the oil. The dielectric measurement indicated that SSO addition enhanced the dielectric properties of the sheet. The study of dielectric relaxation times confirmed the interaction between SSO and the sheet. DC conductivity increased to 6 × 10-6 S/m, so it could be applied in antistatic applications. Also, SSO addition increased the value of the thermal stability. According to SEM micrographs, the film was roughened at a ratio of 60/40 and smoothed out at 50/50. This behavior was confirmed with roughness and contact angle measurement results, in which the film of ratio 60/40 had the highest value equal to (72.03°) and then decreased at 50/50 to (59.62°). These results were confirmed by XRD measurement as the crystallinity increased at the film ratio of 60/40 and decreased again at 50/50. Also, the ratio of 60/40 demonstrated a large decrease in thrombus weights along with a slight increase in hemolysis, which is within the acceptable range and has a high degree of biocompatibility, so this concentration is recommended to be used in blood bags applications.
Collapse
Affiliation(s)
- Shimaa Farag Hamieda
- Microwave Physics and Dielectrics Department, National Research Centre, Giza, Egypt.
| | - Abeer Reffaee
- Microwave Physics and Dielectrics Department, National Research Centre, Giza, Egypt
| | - Mona Saied
- Microwave Physics and Dielectrics Department, National Research Centre, Giza, Egypt
| |
Collapse
|
2
|
Marchellina A, Soegianto A, Irawan B, Indriyasari KN, Rahmatin NM, Mukholladun W, Irnidayanti Y, Payus CM, Hartl MGJ. The presence and physico-chemical properties of microplastics in seawater, sediment, and several organs of the spotted scat fish (Scatophagus argus, Linnaeus, 1766) collected from different locations along the East Java coast in Indonesia. CHEMOSPHERE 2024; 358:142214. [PMID: 38701863 DOI: 10.1016/j.chemosphere.2024.142214] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/15/2024] [Revised: 04/29/2024] [Accepted: 04/30/2024] [Indexed: 05/05/2024]
Abstract
A comprehensive study was undertaken to examine the contamination of spotted scat fish (Scatophagus argus) with microplastics (MP) in various locations along the East Java coast of Indonesia. The purpose of this study was to collect detailed information regarding the abundance, color, shape, size, type of polymer, and chemical components of the MP. The findings of this study indicated that MP exhibiting distinct attributes-including a specific fiber type, black coloration, and a size range of 1000- <5000 μm-was most abundant in the gill, stomach, and intestines of spotted scat fish of varying lengths. And MP with a size range of 100-<500 μm was prevalent in the sediment. MP with black fragments measuring less than 100 μm in diameter were found primarily in seawater. A positive correlation was identified between fish length and MP abundance in the intestines, as indicated by the Spearman correlation coefficient. Conversely, a negative correlation was detected between fish length and MP abundance in the gills. The findings of the Fourier transform infrared spectroscopy and Gas chromatography-mass spectrometry analyses, which indicate the presence of various polymers and chemical substances including plasticizers (e.g., diethyl phthalate, decane, and eicosane), stabilizers (2-piperidinone, hexadecanoic acid, mesitylene, and 2,4-Di-tert-butylphenol), and flame retardant (cyclododecene), in fish, are of the utmost importance. These substances have the potential to endanger the health of both animals and humans if they are ingested through the food chain.
Collapse
Affiliation(s)
- Ary Marchellina
- Department of Biology, Faculty of Science and Technology, Universitas Airlangga, Surabaya, Indonesia.
| | - Agoes Soegianto
- Department of Biology, Faculty of Science and Technology, Universitas Airlangga, Surabaya, Indonesia.
| | - Bambang Irawan
- Department of Biology, Faculty of Science and Technology, Universitas Airlangga, Surabaya, Indonesia.
| | | | - Nailul Muthiati Rahmatin
- Department of Biology, Faculty of Science and Technology, Universitas Airlangga, Surabaya, Indonesia.
| | - Wildanun Mukholladun
- Department of Biology, Faculty of Science and Technology, Universitas Airlangga, Surabaya, Indonesia.
| | - Yulia Irnidayanti
- Department of Biology, Faculty of Mathematics and Natural Sciences, Universitas Negeri Jakarta, Jakarta, Indonesia.
| | - Carolyn Melissa Payus
- Faculty of Science and Natural Resources, Universiti Malaysia Sabah, Kota Kinabalu, Sabah, Malaysia.
| | - Mark G J Hartl
- Institute for Life and Earth Sciences, Centre for Marine Biodiversity and Biotechnology, School of Energy, Geoscience, Infrastructure and Society, Heriot-Watt University, Riccarton, Edinburgh, Scotland, UK.
| |
Collapse
|
3
|
Jansen MAK, Andrady AL, Bornman JF, Aucamp PJ, Bais AF, Banaszak AT, Barnes PW, Bernhard GH, Bruckman LS, Busquets R, Häder DP, Hanson ML, Heikkilä AM, Hylander S, Lucas RM, Mackenzie R, Madronich S, Neale PJ, Neale RE, Olsen CM, Ossola R, Pandey KK, Petropavlovskikh I, Revell LE, Robinson SA, Robson TM, Rose KC, Solomon KR, Andersen MPS, Sulzberger B, Wallington TJ, Wang QW, Wängberg SÅ, White CC, Young AR, Zepp RG, Zhu L. Plastics in the environment in the context of UV radiation, climate change and the Montreal Protocol: UNEP Environmental Effects Assessment Panel, Update 2023. Photochem Photobiol Sci 2024; 23:629-650. [PMID: 38512633 DOI: 10.1007/s43630-024-00552-3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/19/2024] [Accepted: 02/05/2024] [Indexed: 03/23/2024]
Abstract
This Assessment Update by the Environmental Effects Assessment Panel (EEAP) of the United Nations Environment Programme (UNEP) considers the interactive effects of solar UV radiation, global warming, and other weathering factors on plastics. The Assessment illustrates the significance of solar UV radiation in decreasing the durability of plastic materials, degradation of plastic debris, formation of micro- and nanoplastic particles and accompanying leaching of potential toxic compounds. Micro- and nanoplastics have been found in all ecosystems, the atmosphere, and in humans. While the potential biological risks are not yet well-established, the widespread and increasing occurrence of plastic pollution is reason for continuing research and monitoring. Plastic debris persists after its intended life in soils, water bodies and the atmosphere as well as in living organisms. To counteract accumulation of plastics in the environment, the lifetime of novel plastics or plastic alternatives should better match the functional life of products, with eventual breakdown releasing harmless substances to the environment.
Collapse
Affiliation(s)
- Marcel A K Jansen
- School of Biological, Earth and Environmental Sciences, University College, Cork, Ireland.
| | - Anthony L Andrady
- Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC, USA
| | - Janet F Bornman
- Food Futures Institute, Murdoch University, Perth, Australia.
| | | | - Alkiviadis F Bais
- Laboratory of Atmospheric Physics, Aristotle University of Thessaloniki, Thessaloniki, Greece
| | - Anastazia T Banaszak
- Unidad Académica Sistemas Arrecifales, Universidad Nacional Autónoma de México, Puerto Morelos, Mexico
| | - Paul W Barnes
- Department of Biological Sciences and Environment Program, Loyola University New Orleans, New Orleans, LA, USA
| | | | - Laura S Bruckman
- Department of Materials Science and Engineering, Case Western Reserve University, Cleveland, OH, USA
| | - Rosa Busquets
- Chemical and Pharmaceutical Sciences, Kingston University London, Kingston Upon Thames, UK
| | | | - Mark L Hanson
- Department of Environment and Geography, University of Manitoba, Winnipeg, MB, Canada
| | | | - Samuel Hylander
- Centre for Ecology and Evolution in Microbial Model Systems, Linnaeus University, Kalmar, Sweden
| | - Robyn M Lucas
- National Centre for Epidemiology and Population Health, College of Health and Medicine, Australian National University, Canberra, Australia
| | - Roy Mackenzie
- Centro Universitario Cabo de Hornos, Universidad de Magallanes, Puerto Williams, Chile
- Millennium Institute Biodiversity of Antarctic and Subantarctic Ecosystems BASE, Santiago, Chile
- Cape Horn International Center CHIC, Puerto Williams, Chile
| | - Sasha Madronich
- UV-B Monitoring and Research Program, Colorado State University, Fort Collins, CO, USA
| | - Patrick J Neale
- Smithsonian Environmental Research Center, Edgewater, MD, USA
| | - Rachel E Neale
- Population Health Program, QIMR Berghofer Medical Research Institute, Brisbane, Australia
- School of Public Health, University of Queensland, Brisbane, Australia
| | - Catherine M Olsen
- Population Health Program, QIMR Berghofer Medical Research Institute, Brisbane, Australia
- Frazer Institute, University of Queensland, Brisbane, Australia
| | - Rachele Ossola
- Department of Chemistry, Colorado State University, Fort Collins, CO, USA
| | | | - Irina Petropavlovskikh
- Cooperative Institute for Research in Environmental Sciences, University of Colorado, Boulder, CO, USA
- Ozone and Water Vapor Division, NOAA ESRL Global Monitoring Laboratory, Boulder, CO, USA
| | - Laura E Revell
- School of Physical and Chemical Sciences, University of Canterbury, Christchurch, New Zealand
| | - Sharon A Robinson
- Securing Antarctica's Environmental Future, University of Wollongong, Wollongong, Australia
- School of Earth, Atmospheric and Life Sciences, University of Wollongong, Wollongong, Australia
| | - T Matthew Robson
- UK National School of Forestry, University of Cumbria, Ambleside Campus, Ambleside, UK
- Organismal & Evolutionary Ecology, Viikki Plant Science Centre, Faculty of Biological & Environmental Sciences, University of Helsinki, Helsinki, Finland
| | - Kevin C Rose
- Department of Biological Sciences, Rensselaer Polytechnic Institute, Troy, NY, USA
| | - Keith R Solomon
- School of Environmental Sciences, University of Guelph, Guelph, Canada
| | - Mads P Sulbæk Andersen
- Department of Chemistry and Biochemistry, California State University Northridge, Northridge, CA, USA
- Department of Chemistry, University of Copenhagen, Copenhagen, Denmark
| | - Barbara Sulzberger
- Retired From Eawag: Swiss Federal Institute of Aquatic Science and Technology, Dubendorf, Switzerland
| | - Timothy J Wallington
- Center for Sustainable Systems, School for Environment and Sustainability, University of Michigan, Ann Arbor, MI, USA
| | - Qing-Wei Wang
- Institute of Applied Ecology, Chinese Academy of Sciences, Shenyang, China
| | - Sten-Åke Wängberg
- Department of Marine Sciences, University of Gothenburg, Gothenburg, Sweden
| | | | | | - Richard G Zepp
- ORD/CEMM, US Environmental Protection Agency, Athens, GA, USA
| | - Liping Zhu
- State Key Lab for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai, China
| |
Collapse
|
4
|
Vakros J, Hapeshi E, Cannilla C, Bonura G. Synthesis, Characterization and Performance of Materials for a Sustainable Future. Polymers (Basel) 2023; 16:124. [PMID: 38201789 PMCID: PMC10781042 DOI: 10.3390/polym16010124] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/14/2023] [Accepted: 11/15/2023] [Indexed: 01/12/2024] Open
Abstract
The current era has been defined as "The Plastic Era", considering that over the past 50 years the role and importance of polymeric materials in our economy has steadily grown, reaching a production of around a few hundred million tons per year which may even double in the next 20 years [...].
Collapse
Affiliation(s)
- John Vakros
- Department of Chemical Engineering, University of Patras, Caratheodory 1, University Campus, 26504 Patras, Greece;
- Department of Health Sciences, School of Life and Health Sciences, University of Nicosia, 46 Makedonitissas Avenue, CY-2417, P.O. Box 24005, Nicosia 1700, Cyprus;
| | - Evroula Hapeshi
- Department of Health Sciences, School of Life and Health Sciences, University of Nicosia, 46 Makedonitissas Avenue, CY-2417, P.O. Box 24005, Nicosia 1700, Cyprus;
| | - Catia Cannilla
- Institute for Advanced Energy Technologies “Nicola Giordano” ITAE, National Research Council (CNR), 98126 Messina, Italy;
| | - Giuseppe Bonura
- Institute for Advanced Energy Technologies “Nicola Giordano” ITAE, National Research Council (CNR), 98126 Messina, Italy;
| |
Collapse
|
5
|
Barandiaran A, Montanes N, Sanchez-Nacher L, Balart R, Selles MA, Moreno V. Investigation of Cinnamic Acid Derivatives as Alternative Plasticizers for Improved Ductility of Polyvinyl Chloride Films. Polymers (Basel) 2023; 15:4265. [PMID: 37959944 PMCID: PMC10648044 DOI: 10.3390/polym15214265] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/30/2023] [Revised: 10/21/2023] [Accepted: 10/28/2023] [Indexed: 11/15/2023] Open
Abstract
This study investigates the viability of cinnamic acid derivatives as alternative plasticizers for polyvinyl chloride (PVC) films by addressing concerns about conventional phthalate-based options that pose health and environmental risks. By theoretical modeling, this research evaluates the compatibility between various cinnamic acid-based plasticizers and the PVC matrix, which suggests their potential effectiveness. Additionally, the incorporation of these plasticizers notably enhances the tensile properties of PVC films, particularly in terms of ductility and elongation at break by surpassing the neat PVC. Moreover, cinnamic acid-based plasticizers induce a drop in the glass transition temperature and storage modulus by, thereby, enhancing flexibility and reducing brittleness in the material. Although a slight reduction in the onset degradation temperature is observed, it does not impede the industrial processing of PVC plastisols at temperatures up to 190 °C. Optically, plasticized films exhibit high transparency with minimal UV and visible light absorption, which renders them suitable for applications necessitating clarity. The water vapor transmission rate analysis indicates increased permeability, influenced by molecular volumes. Atomic force microscopy reveals a compacted, homogeneous surface structure in most plasticized films, which signifies improved film quality. Thus, utilizing cinnamic acid derivatives as PVC plasticizers offers substantial mechanical and structural benefits, while compatibility ensures effective integration by contributing to environmentally sustainable PVC formulations with enhanced performance.
Collapse
Affiliation(s)
| | | | | | | | | | - Virginia Moreno
- Technological Institute of Materials (ITM), Universitat Politècnica de València (UPV), Plaza Ferrándiz y Carbonell 1, 03801 Alcoy, Spain; (A.B.); (N.M.); (L.S.-N.); (R.B.); (M.A.S.)
| |
Collapse
|
6
|
Janik W, Nowotarski M, Ledniowska K, Biernat N, Abdullah, Shyntum DY, Krukiewicz K, Turczyn R, Gołombek K, Dudek G. Effect of Time on the Properties of Bio-Nanocomposite Films Based on Chitosan with Bio-Based Plasticizer Reinforced with Nanofiber Cellulose. Int J Mol Sci 2023; 24:13205. [PMID: 37686012 PMCID: PMC10487500 DOI: 10.3390/ijms241713205] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/28/2023] [Revised: 08/22/2023] [Accepted: 08/23/2023] [Indexed: 09/10/2023] Open
Abstract
The deterioration of the performance of polysaccharide-based films over time, particularly their hydrophilicity and mechanical properties, is one of the main problems limiting their applications in the packaging industry. In the present study, we proposed to improve the performance of chitosan-based films through the use of: (1) nanocellulose as an additive to reduce their hydrophilic nature; (2) bio-based plasticizer to improve their mechanical properties; and (3) chestnut extract as an antimicrobial agent. To evaluate their stability over time, the properties of as-formed films (mechanical, hydrophilic, barrier and antibacterial) were studied immediately after preparation and after 7, 14 and 30 days. In addition, the morphological properties of the films were characterized by scanning electron microscopy, their structure by FTIR, their transparency by UV-Vis and their thermal properties by TGA. The films showed a hydrophobic character (contact angle above 100°), barrier properties to oxygen and carbon dioxide and strong antibacterial activity against Gram-negative (E. coli) and Gram-positive (S. aureus) bacteria. Moreover, the use of nanofillers did not deteriorate the elongation at breaks or the thermal properties of the films, but their addition reduced the transparency. In addition, the results showed that the greatest change in film properties occurred within the first 7 days after sample preparation, after which the properties were found to stabilize.
Collapse
Affiliation(s)
- Weronika Janik
- Łukasiewicz Research Network—Institute of Heavy Organic Synthesis “Blachownia”, 47-225 Kędzierzyn-Koźle, Poland; (W.J.); (K.L.); (N.B.)
- PhD School, Department of Physical Chemistry and Technology of Polymers, Silesian University of Technology, 44-100 Gliwice, Poland;
| | - Michał Nowotarski
- Department of Physical Chemistry and Technology of Polymers, Faculty of Chemistry, Silesian University of Technology, 44-100 Gliwice, Poland; (M.N.); (K.K.); (R.T.)
| | - Kerstin Ledniowska
- Łukasiewicz Research Network—Institute of Heavy Organic Synthesis “Blachownia”, 47-225 Kędzierzyn-Koźle, Poland; (W.J.); (K.L.); (N.B.)
- PhD School, Department of Physical Chemistry and Technology of Polymers, Silesian University of Technology, 44-100 Gliwice, Poland;
| | - Natalia Biernat
- Łukasiewicz Research Network—Institute of Heavy Organic Synthesis “Blachownia”, 47-225 Kędzierzyn-Koźle, Poland; (W.J.); (K.L.); (N.B.)
| | - Abdullah
- PhD School, Department of Physical Chemistry and Technology of Polymers, Silesian University of Technology, 44-100 Gliwice, Poland;
- Department of Physical Chemistry and Technology of Polymers, Faculty of Chemistry, Silesian University of Technology, 44-100 Gliwice, Poland; (M.N.); (K.K.); (R.T.)
| | | | - Katarzyna Krukiewicz
- Department of Physical Chemistry and Technology of Polymers, Faculty of Chemistry, Silesian University of Technology, 44-100 Gliwice, Poland; (M.N.); (K.K.); (R.T.)
- Centre for Organic and Nanohybrid Electronics, Silesian University of Technology, 44-100 Gliwice, Poland
| | - Roman Turczyn
- Department of Physical Chemistry and Technology of Polymers, Faculty of Chemistry, Silesian University of Technology, 44-100 Gliwice, Poland; (M.N.); (K.K.); (R.T.)
- Centre for Organic and Nanohybrid Electronics, Silesian University of Technology, 44-100 Gliwice, Poland
| | - Klaudiusz Gołombek
- Materials Research Laboratory, Faculty of Mechanical Engineering, Silesian University of Technology, 44-100 Gliwice, Poland;
| | - Gabriela Dudek
- Department of Physical Chemistry and Technology of Polymers, Faculty of Chemistry, Silesian University of Technology, 44-100 Gliwice, Poland; (M.N.); (K.K.); (R.T.)
| |
Collapse
|
7
|
Janik W, Nowotarski M, Ledniowska K, Shyntum DY, Krukiewicz K, Turczyn R, Sabura E, Furgoł S, Kudła S, Dudek G. Modulation of physicochemical properties and antimicrobial activity of sodium alginate films through the use of chestnut extract and plasticizers. Sci Rep 2023; 13:11530. [PMID: 37460643 DOI: 10.1038/s41598-023-38794-3] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/26/2023] [Accepted: 07/14/2023] [Indexed: 07/20/2023] Open
Abstract
Due to the growing demand for robust and environmentally friendly antimicrobial packaging materials, biopolymers have recently become extensively investigated. Although biodegradable biopolymers usually lack mechanical properties, which makes it inevitable to blend them with plasticizers. The purpose of this study was to investigate plasticization efficiency of bio-based plasticizers introduced into sodium alginate compositions containing chestnut extract and their effect on selected film properties, including primarily mechanical and antibacterial properties. The films were prepared by the casting method and sodium alginate was cross-linked with calcium chloride. Six different plasticizers, including three commercially available ones (glycerol, epoxidized soybean oil and palm oil) and three synthesized plasticizers that are mixtures of bio-based plasticizers, were used to compare their influence on the film properties. Interactions between the polymer matrix and the plasticizers were investigated using Fourier transform infrared spectroscopy. The morphological characteristics of the films were characterized by scanning electron microscopy. Thermal properties, tensile strength, elongation at break, hydrophilic, and barrier properties of the obtained films were also determined. To confirm the obtaining of active films through the use of chestnut extract and to study the effect of the proposed plasticizers on the antibacterial activity of the extract, the obtained films were tested against bacteria cultures. The final results showed that all of the obtained films exhibit a hydrophilic character and high barrier effect to oxygen, carbon dioxide and water vapor. In addition, sodium alginate films prepared with chestnut extract and the plasticizer proposed by us, showed better mechanical and antimicrobial properties than the films obtained with chestnut extract and the commercially available plasticizers.
Collapse
Affiliation(s)
- Weronika Janik
- Łukasiewicz Research Network-Institute of Heavy Organic Synthesis "Blachownia", 47-225, Kędzierzyn-Koźle, Poland.
- Department of Physical Chemistry and Technology of Polymers, PhD School, Silesian University of Technology, 44-100, Gliwice, Poland.
| | - Michał Nowotarski
- Department of Physical Chemistry and Technology of Polymers, Faculty of Chemistry, Silesian University of Technology, 44-100, Gliwice, Poland
| | - Kerstin Ledniowska
- Łukasiewicz Research Network-Institute of Heavy Organic Synthesis "Blachownia", 47-225, Kędzierzyn-Koźle, Poland
- Department of Physical Chemistry and Technology of Polymers, PhD School, Silesian University of Technology, 44-100, Gliwice, Poland
| | | | - Katarzyna Krukiewicz
- Department of Physical Chemistry and Technology of Polymers, Faculty of Chemistry, Silesian University of Technology, 44-100, Gliwice, Poland
- Centre for Organic and Nanohybrid Electronics, Silesian University of Technology, 44-100, Gliwice, Poland
| | - Roman Turczyn
- Department of Physical Chemistry and Technology of Polymers, Faculty of Chemistry, Silesian University of Technology, 44-100, Gliwice, Poland
- Centre for Organic and Nanohybrid Electronics, Silesian University of Technology, 44-100, Gliwice, Poland
| | - Ewa Sabura
- Łukasiewicz Research Network-Institute of Heavy Organic Synthesis "Blachownia", 47-225, Kędzierzyn-Koźle, Poland
| | - Simona Furgoł
- Łukasiewicz Research Network-Institute of Heavy Organic Synthesis "Blachownia", 47-225, Kędzierzyn-Koźle, Poland
| | - Stanisław Kudła
- Łukasiewicz Research Network-Institute of Heavy Organic Synthesis "Blachownia", 47-225, Kędzierzyn-Koźle, Poland
| | - Gabriela Dudek
- Department of Physical Chemistry and Technology of Polymers, Faculty of Chemistry, Silesian University of Technology, 44-100, Gliwice, Poland
| |
Collapse
|
8
|
Lenzi L, Degli Esposti M, Braccini S, Siracusa C, Quartinello F, Guebitz GM, Puppi D, Morselli D, Fabbri P. Further Step in the Transition from Conventional Plasticizers to Versatile Bioplasticizers Obtained by the Valorization of Levulinic Acid and Glycerol. ACS SUSTAINABLE CHEMISTRY & ENGINEERING 2023; 11:9455-9469. [PMID: 37389191 PMCID: PMC10302884 DOI: 10.1021/acssuschemeng.3c01536] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 03/20/2023] [Revised: 05/24/2023] [Indexed: 07/01/2023]
Abstract
In the last two decades, the use of phthalates has been restricted worldwide due to their well-known toxicity. Nonetheless, phthalates are still widely used for their versatility, high plasticization effect, low cost, and lack of valuable alternatives. This study presents the fully bio-based and versatile glycerol trilevulinate plasticizer (GT) that was obtained by the valorization of glycerol and levulinic acid. The mild-conditions and solvent-free esterification used to synthesize GT was optimized by investigating the product by Fourier transform infrared and NMR spectroscopy. An increasing content of GT, from 10 to 40 parts by weight per hundred parts of resin (phr), was tested with poly(vinyl chloride), poly(3-hydroxybutyrate), poly(3-hydroxybutyrate-co-3-hydroxyvalerate), poly(lactic acid), and poly(caprolactone), which typically present complicated processability and/or mechanical properties. GT produced a significant plasticization effect on both amorphous and semicrystalline polymers, reducing their glass-transition temperature and stiffness, as observed by differential scanning calorimetry measurements and tensile tests. Remarkably, GT also decreased both the melting temperature and crystallinity degree of semicrystalline polymers. Furthermore, GT underwent enzyme-mediated hydrolysis to its initial constituents, envisioning a promising prospective for environmental safety and upcycling. Furthermore, 50% inhibitory concentration (IC50) tests, using mouse embryo fibroblasts, proved that GT is an unharmful alternative plasticizer, which makes it potentially applicable in the biomedical field.
Collapse
Affiliation(s)
- Luca Lenzi
- Department
of Civil, Chemical, Environmental, and Materials Engineering (DICAM), Università di Bologna, Via U. Terracini 28, 40131 Bologna, Italy
- National
Interuniversity Consortium of Materials Science and Technology (INSTM), Via G. Giusti 9, 50121 Firenze, Italy
| | - Micaela Degli Esposti
- Department
of Civil, Chemical, Environmental, and Materials Engineering (DICAM), Università di Bologna, Via U. Terracini 28, 40131 Bologna, Italy
- National
Interuniversity Consortium of Materials Science and Technology (INSTM), Via G. Giusti 9, 50121 Firenze, Italy
| | - Simona Braccini
- National
Interuniversity Consortium of Materials Science and Technology (INSTM), Via G. Giusti 9, 50121 Firenze, Italy
- BIOLab
Research Group, Department of Chemistry and Industrial Chemistry, Università di Pisa, Via G. Moruzzi 13, 56124 Pisa, Italy
| | - Chiara Siracusa
- Institute
of Environmental Biotechnology University of Natural Resources and
Life Sciences Vienna, Department of Agrobiotechnology, IFA-Tulln, Konrad-Lorenz-Strasse 20, 3430 Tulln an der Donau, Austria
| | - Felice Quartinello
- Institute
of Environmental Biotechnology University of Natural Resources and
Life Sciences Vienna, Department of Agrobiotechnology, IFA-Tulln, Konrad-Lorenz-Strasse 20, 3430 Tulln an der Donau, Austria
| | - Georg M. Guebitz
- Institute
of Environmental Biotechnology University of Natural Resources and
Life Sciences Vienna, Department of Agrobiotechnology, IFA-Tulln, Konrad-Lorenz-Strasse 20, 3430 Tulln an der Donau, Austria
| | - Dario Puppi
- National
Interuniversity Consortium of Materials Science and Technology (INSTM), Via G. Giusti 9, 50121 Firenze, Italy
- BIOLab
Research Group, Department of Chemistry and Industrial Chemistry, Università di Pisa, Via G. Moruzzi 13, 56124 Pisa, Italy
| | - Davide Morselli
- Department
of Civil, Chemical, Environmental, and Materials Engineering (DICAM), Università di Bologna, Via U. Terracini 28, 40131 Bologna, Italy
- National
Interuniversity Consortium of Materials Science and Technology (INSTM), Via G. Giusti 9, 50121 Firenze, Italy
| | - Paola Fabbri
- Department
of Civil, Chemical, Environmental, and Materials Engineering (DICAM), Università di Bologna, Via U. Terracini 28, 40131 Bologna, Italy
- National
Interuniversity Consortium of Materials Science and Technology (INSTM), Via G. Giusti 9, 50121 Firenze, Italy
| |
Collapse
|
9
|
Chitosan-based films with alternative eco-friendly plasticizers: Preparation, physicochemical properties and stability. Carbohydr Polym 2022; 301:120277. [DOI: 10.1016/j.carbpol.2022.120277] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/27/2022] [Revised: 10/17/2022] [Accepted: 10/26/2022] [Indexed: 11/19/2022]
|