Chitosan as an Outstanding Polysaccharide Improving Health-Commodities of Humans and Environmental Protection

Extraction of chitin from flammulina velutipes waste: A low-concentration acid pretreatment and aspergillus iger fermentation approach

In recent years, with the booming of the edible mushroom industry, chitin production has become increasingly dependent on fungi and other non-traditional sources. Fungal chitin has advantages including superior performance, simpler separation processes, abundant raw materials, and the absence of shellfish allergens. As a kind of edible mushroom, flammulina velutipes (F. velutipes) also has the advantages of wide source and large annual yield. This provided the possibility for the extraction of chitin. Here, a procedure to extract chitin from F. velutipes waste be presented. This method comprises low-concentration acid pretreatment coupled with consolidated bioprocessing with Aspergillus niger. Characterization by SEM, FTIR, XRD, NMR, and TGA confirmed that the extracted chitin was β-chitin. To achieve optimal fermentation of F. velutipes waste (80 g/L), ammonium sulfate and glucose were selected as nitrogen and carbon sources (5 g/L), with a fermentation time of 5 days. The extracted chitin could be further deacetylated and purified to obtain high-purity chitosan (99.2 % ± 1.07 %). This chitosan exhibited a wide degree of deacetylation (50.0 % ± 1.33 % - 92.1 % ± 0.97 %) and a molecular weight distribution of 92-192 kDa. Notably, the yield of chitosan extracted in this study was increased by 56.3 % ± 0.47 % compared to the traditional chemical extraction method.

Macromolecules-based encapsulation of pesticides with carriers: A promising approach for safe and effective delivery

The global issue of pollution caused by the misuse and indiscriminate application of pesticides has reached critical levels. In this vein, encapsulating pesticides with carriers offers a promising approach that impacts key parameters such as pesticide release kinetics, stability, and biocompatibility, enhancing the safe and effective delivery of agrochemicals. Encapsulated pesticides hold the potential to reduce off-target effects, decrease environmental contamination, and improve overall crop protection. This review highlights the potential benefits and challenges associated with the use of both organic and in-organic carriers in pesticide encapsulation, and the current state of research in this field. Overall, the encapsulation of pesticides with carriers presents a promising approach for the safe and effective delivery of these vital agricultural compounds. By harnessing the advantages of encapsulation, this technique offers a potential solution to mitigate the adverse effects of conventional pesticides and contribute towards sustainable and environmentally conscious farming practices. Further research and development in this field is necessary to optimize the encapsulation process, carrier properties and advance towards sustainable and environmentally friendly pesticide delivery systems.

Effect of Chitosan Irrigant and Lubricating Gel on Bond Strength of Resin Sealer to Radicular Dentin: An In Vitro Study

BACKGROUND

The adhesive strength of sealers to dentin is influenced by various factors, and the presence of a smear layer is among the critical variables. Chitosan, known for its dentin compatibility, has previously demonstrated a reduction in dentin change and resin sealer bond strength comparable to ethylenediaminetetraacetic acid (EDTA) when used as an irrigant and final rinse. The study investigates the impact of chitosan, used as both a lubricating gel and final rinse, on the push-out bond strength of resin sealer.

MATERIALS AND METHOD

Forty single-rooted premolar teeth, each with a fully formed root and a single root canal, were collected post-extraction. During canal preparation, 1 ml sodium hypochlorite (3%) was used for irrigation at every change of instrument, followed by applying specific chelating gel and final rinse for each experimental group. The groups included: Group 1 (17% EDTA chelating gel, final rinse with saline), Group 2 (17% EDTA chelating gel, final rinse with 17% EDTA solution), Group 3 (chitosan chelating gel, final rinse with saline solution), and Group 4 (chitosan chelating gel, final rinse with 0.2% chitosan solution), 10 specimens in each group. After obturation, specimens were sealed and incubated for a week at 37°C with 100% humidity. The universal testing machine was used for push-out tests, and specimens were examined using a scanning electron microscope (SEM) to identify various types of bond failure.

RESULTS

Among the four groups, Group 2 exhibited the highest mean push-out bond strength (7.33 ± 0.26 MPa), followed by Group 4 (5.33 ± 0.25 MPa), Group 1 (4.61 ± 0.30 MPa), and Group 3 (2.94 ± 0.32 MPa). The variations in bond strength suggest a notable impact of the chelating agents and final rinse solutions on the resin sealer's interaction with dentin.

CONCLUSION

The study concludes that the use of EDTA as both a lubricating gel and a final rinse significantly enhances push-out bond strength, outperforming chitosan in this study. Groups with saline as the final rinse (Group 1 and Group 3) exhibited the least bond strength, highlighting the importance of the final rinse in root canal therapy.

The effect of in vitro digestion on the interaction between polysaccharides derived from Pleurotus eryngii and intestinal mucus

Pleurotus eryngii polysaccharides (PEPs) have been proven to display multiple activities through digestive system action, from which the digestion products should first interact with intestinal mucus (MUC), followed by the function of intestinal cells. Hence, possible interacting characterizations between MUC and in vitro simulated digestion products of P. eryngii polysaccharides (DPEPs) and PEP were carried out in the present study. Results showed that both PEP and DPEP could significantly interact with MUC. Moreover, digestion can modify the interaction between polysaccharides and MUC; the degree of interaction also changes with time incrementing. Viscosity could be decreased after digesting. According to the zeta potential and stability analysis result, the digestive behavior could be regular and stable between polysaccharides and MUC interactions. Following fluorescence and infrared spectra, the structure of polysaccharides and mucin might be changed by digestion between polysaccharides and MUC. The study indicates that the interaction formed between DPEP and MUC might indirectly impact the exercise and immune activities of polysaccharides and influence the transportation of other nutrients. Overall, our results, the absorption and transport pathways of PEP, can be initially revealed and may provide a novel research viewpoint on the active mechanism of PEP in the intestinal tract.

One-Pot Synthesis of a Robust Crosslinker-Free Thermo-Reversible Conducting Hydrogel Electrode for Epidermal Electronics

Traditional epidermal electrodes, typically made of silver/silver chloride (Ag/AgCl), have been widely used in various applications, including electrophysiological recordings and biosignal monitoring. However, they present limitations due to inherent material mismatches with the skin. This often results in high interface impedance, discomfort, and potential skin irritation, particularly during prolonged use or for individuals with sensitive skin. While various tissue-mimicking materials have been explored, their mechanical advantages often come at the expense of conductivity, resulting in low-quality recordings. We herein report the facile fabrication of conducting and stretchable hydrogels using a "one-pot" method. This approach involves the synthesis of a natural hydrogel, termed Golde, composed of abundant and eco-friendly components, including gelatin, chitosan, and glycerol. To enhance the conductivity of the hydrogel, various conducting materials, such as poly(3,4-ethylenedioxythiophene) polystyrenesulfonate (PEDOT:PSS), thermally reduced graphene (TRG), and MXene, are introduced. The resulting conducting hydrogels exhibit remarkable robustness, do not require crosslinkers, and possess a unique thermo-reversible property, simplifying the fabrication process and ensuring enhanced long-term stability. Moreover, their fabrication is sustainable, as it employs environmentally friendly materials and processes while retaining their skin-friendly characteristics. The resulting hydrogel electrodes were tested for electrocardiogram (ECG) signal acquisition and outperformed commercial electrodes even when implemented in an all-flexible electrode setup simply using copper tape, owing to their inherent adhesiveness.

Chitosan: Structural and Chemical Modification, Properties, and Application

Chitosan is a polymer of natural origins that possesses many favourable properties [...].

Mechanisms and factors affecting the removal of minocycline from aqueous solutions using graphene-modified resorcinol formaldehyde aerogels

In recent years, concerns about the presence of pharmaceutical compounds in wastewater have increased. Various types of residues of tetracycline family antibiotic compounds, which are widely used, are found in environmental waters in relatively low and persistent concentrations, adversely affecting human health and the environment. In this study, a resorcinol formaldehyde (RF) aerogel was prepared using the sol-gel method at resorcinol/catalyst ratio of 400 and resorcinol/water ratio of 2 and drying at ambient pressure for removing antibiotics like minocycline. Next, RF aerogel was modified with graphene and to increase the specific surface area and porosity of the modified sample and to form the graphene plates without compromising the interconnected porous three-dimensional structure of the aerogel. Also, the pores were designed according to the size of the minocycline particles on the meso- and macro-scale, which bestowed the modified sample the ability to remove a significant amount of the minocycline antibiotic from the aqueous solution. The removal percentage of the antibiotic obtained by UV-vis spectroscopy. Ultimately, the performance of prepared aerogels was investigated under various conditions, including adsorbent doses (4-10 mg), solution pHs (2-12), contact times of the adsorbent with the adsorbate (3-24 h), and initial concentration of antibiotic (40-100 mg/l). The results from the BET test demonstrated that the surface area of the resorcinol formaldehyde aerogel sample, which included 1 wt% graphene (RF-G1), exhibited an augmentation in comparison to the surface area of the pure aerogel. Additionally, it was noted that the removal percentage of minocycline antibiotic for both the unmodified and altered samples was 71.6% and 92.1% at the optimal pH values of 4 and 6, respectively. The adsorption capacity of pure and modified aerogel for the minocycline antibiotic was 358 and 460.5 mg/g, respectively. The adsorption data for the modified aerogel was studied by the pseudo-second-order model and the results obtained from the samples for antibiotic adsorption with this model revealed a favorable fit, which indicated that the chemical adsorption in the rapid adsorption of the antibiotic by the modified aerogel had occurred.

Synthesis of Schiff Bases Based on Chitosan and Heterocyclic Moiety: Evaluation of Antimicrobial Activity

Schiff bases of chitosan (CS) were prepared by reaction of four different heterocyclic compounds, namely, 1,3-dimethyl-2,4,6-trioxohexahydropyrimidine-5-carbaldehyde (M1), 3-acetyl-2H-chromen-2-one (M2), 5-chloro-3-methyl-1-phenyl-1H-pyrazole-4-carbaldehyde (M3), and 4-oxo-4H-chromene-3-carbaldehyde (M4), with CS using thermal and ultrasound approaches. CS Schiff base formation was confirmed by using FT-IR, XRD, and TGA. Characteristic data show that amino groups in chitosan reacted with the functional group in the heterocyclic compound to form the Schiff base. CS Schiff bases show thermal stability more than pure CS. The antimicrobial activity of Schiff bases was tested against +ve Gram bacteria and -ve Gram bacteria. The result shows that Schiff bases prepared by temperature and ultrasound methods possess high antimicrobial activity against +ve Gram bacteria and -ve Gram bacteria; in comparison, Schiff bases produced by the ultrasound method have higher antimicrobial activity. The Schiff base (CSM4U), prepared by the ultrasound method by reaction of CS with 4-oxo-4H-chromene-3-carbaldehyde, exhibited higher antimicrobial activity than Gentamicin as an antibacterial agent. The inhibition range caused by CSM4U was between 19 and 27 mm. Moreover, CSM4U also acted as an antifungal agent, causing an inhibition zone of 21 mm for both Candida albicans and Candida tropicalis, which was higher than that of Terbinafine.

Encapsulation of pomegranate polyphenols by ionic gelation: Strategies for improved retention and controlled release

This study aimed at producing pectin hydrogel beads by ionic gelation proce to carry pomegranate extract (PE) evaluating approaches to increase its retention and protect the polyphenols from environmental conditions that interfere in the stability and color of these compounds, such as the pH of the medium. Several strategies were tested to reduce the mass transfer and consequently increase its retention. The insertion of a filler (gelatinized starch), the employment of different concentrations from the external environment, the adsorption using blank pectin-starch beads, and the electrostatic coating using chitosan were performed. The release of entrapped compounds over time was employed to evaluate the release pattern of PE in water media. Diffusion coefficients calculated from these experiments were then used to estimate the PE release behavior. The encapsulation efficiency (EE) was significantly improved (42 % to 101 %) when equalizing the concentration of the external medium with that from the beads formulation. Furthermore, the increase in the PE concentration was proportional to the rise in the mechanical strength (MS) of the beads which indicates a modification of internal structure due to the presence of polyphenols. The adsorption was efficient in entrapping the active compound, and despite the high PE content observed for all beads (average value of 2960.26 mg of gallic acid equivalent/100 g sample), they had the lowest diffusion coefficient from the release in water media. Finally, the coating was able to reduce the release rate in most of the tests (DAB uncoated = 0.5 DAB coated), however, during the electrostatic deposition a loss of about 32 % of the phenolic compounds in the chitosan solution was observed which led to a reduced EE. Despite the obtention of retarded release, coating studies need to be improved. Some adjustments in the execution of this technique are necessary so that the losses are reduced and the process becomes viable for the use of beads in food.

Advances in preparation, biomedical, and pharmaceutical applications of chitosan-based gold, silver, and magnetic nanoparticles: A review

During the last decades, the ever-increasing incidence of various diseases, like cancer, has led to a high rate of death worldwide. On the other hand, conventional modalities (such as chemotherapy and radiotherapy) have not indicated enough efficiency in the diagnosis and treatment of diseases. Thus, potential novel approaches should be taken into consideration to pave the way for the suppression of diseases. Among novel approaches, biomaterials, like chitosan nanoparticles (CS NPs, N-acetyl-glucosamine and D-glucosamine), have been approved by the FDA for some efficient pharmaceutical applications. These NPs owing to their physicochemical properties, modification with different molecules, biocompatibility, serum stability, less immune response, suitable pharmacokinetics and pharmacodynamics, etc. have received deep attention among researchers and clinicians. More importantly, the impact of CS polysaccharide in the synthesis, preparation, and delivery of metallic NPs (like gold, silver, and magnetic NPs), and combination of CS with these metallic NPs can further facilitate the diagnosis and treatment of diseases. Metallic NPs possess some features, like converting NIR photon energy into thermal energy and anti-microorganism capability, and can be a potential candidate for the diagnosis and treatment of diseases in combination with CS NPs. These combined NPs would be efficient pharmaceuticals in the future.

Preparation 2-hydroxy-1-naphthaldehyde cross-linked Fe3O4@chitosan-polyacrylamide nanocomposite for removal of everzol black from aqueous solutions

In this study, new 2-hydroxy-1-naphthaldehyde linked Fe₃O₄/chitosan-polyacrylamide nanocomposite (Fe₃O₄@CS@Am@Nph) were prepared. The synthesized nanocomposite was characterized by (FT-IR), X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), vibrating Sample Magnetometry (VSM) and Termogravimetric Analysis (TGA). The 2-hydroxy-1-naphthaldehyde modified Fe₃O₄@CS@Am@Nph nanocomposite was used as an effective adsorbent for removal of everzol black from aqueous solutions by batch adsorption procedure. The effects of important parameters on the surface absorption process of everzol black dye, including pH, contact time, adsorbent dosage and initial dye concentration were studied. The Langmuir, Freundlich and Temkin adsorption models were used to describe adsorption isotherms and constants. The equilibrium results revealed that the adsorption behavior of the everzol black dye on the Fe₃O₄@CS@Am@Nph nanocomposite fitted well with the Langmuir model. On the basis of the Langmuir analysis, the maximum adsorption capacity (qm) of the Fe₃O₄@CS@Am@Nph for everzol black was found to be 63.69 mg/g. The kinetic studies indicated that adsorption in all cases to be a pseudo second-order process. Further, the thermodynamic studies showed the adsorption to be a spontaneous and endothermic process.

Supramolecular Pd@methioine-EDTA-chitosan nanocomposite: an effective and recyclable bio-based and eco-friendly catalyst for the green Heck cross-coupling reaction under mild conditions

Supramolecular palladium(ii) supported on modified chitosan by dl-methionine using an ethylenediaminetetraacetic acid linker (Pd@MET-EDTA-CS) was designed and prepared through a simple procedure. The structure of this novel supramolecular nanocomposite was characterized by different spectroscopic, microscopic and analytical techniques including FTIR, EDX, XRD, FESEM, TGA, DRS, TEM, AA, and BET. The obtained bio-based nanomaterial was successfully investigated, as a highly efficient and green heterogeneous catalyst, in the Heck cross-coupling reaction (HCR) for the synthesis of various valuable biologically active cinnamic acid ester derivatives from the corresponding aryl halides using several acrylates. Indeed, aryl halides containing I or Br survived very well under optimized conditions to afford the corresponding products compared to the substrates with Cl. The prepared Pd@MET-EDTA-CS nanocatalyst promoted the HCR in high to excellent yields and short reaction times with minimum Pd loading (0.0027 mol%) on its structure as well as without any leaching occurring during the process. The recovery of the catalyst was performed by simple filtration and the catalytic activity remained approximately constant after five runs for the model reaction.

The Use of Chitosan for Flocculation Recovery of Bacillus Biomass Grown on Dairy and Wine Industry Effluents

The downstream processing of efficient biomass-based microbial biopesticides is heavily reliant on obtaining the largest concentration of viable cells in the most cost-effective manner. The goal of this research was to assess the ability of chitosan flocculation to recover bacterial Bacillus sp. BioSol021 biomass from the broth after biological treatment of wastewaters from the dairy and wine industries. Second-order factorial design models were used to estimate the effect of chitosan concentration and mixing speed on flocculation efficiency, settling velocity, and antimicrobial activity against Aspergillus flavus, i.e., inhibition zone diameter. Response surface methodology was followed by multi-objective optimization by applying the desirability function (DF) and genetic algorithm (GA). The optimum values for flocculation efficiency, settling velocity, and inhibition zone diameter for cheese whey effluent were 88%, 0.10 mm/s, and 51.00 mm, respectively. In the case of winery flotation effluent, the optimum values were flocculation efficiency 95% and settling velocity 0.05 mm/s, while the inhibition zone diameter was 48.00 mm. These results indicate that utilizing chitosan as a flocculation agent not only fits the criteria for effective downstream processing, but also has a synergistic effect on Bacillus sp. antibacterial activity.

Crosslinked Chitosan Nanoparticles with Muco-Adhesive Potential for Intranasal Delivery Applications

Intranasal drug delivery is convenient and provides a high bioavailability but requires the use of mucoadhesive nanocarriers. Chitosan is a well-established polymer for mucoadhesive applications but can suffer from poor cytocompatibility and stability upon administration. In this work, we present a method to obtain stable and cytocompatible crosslinked chitosan nanoparticles. We used 2,6-pyridinedicarboxylic acid as a biocompatible crosslinker and compared the obtained particles with those prepared by ionotropic gelation using sodium tripolyphosphate. Nanoparticles were tested to evaluate the size and the surface charge, as well as their stability in storage conditions (4 °C), at the nasal cavity temperature (32 °C), and at the body temperature (37 °C). The crosslinked chitosan nanoparticles showed a size around 150 nm and a surface charge of 10.3 mV ± 0.9 mV, both compatible with the intranasal drug administration. Size and surface charge parameters did not significantly vary over time, indicating the good stability of these nanoparticles. We finally tested their cytocompatibility in vitro using SHSY5Y human neuroblastoma and RPMI 2650 human nasal epithelial cells, with positive results. In conclusion, the proposed synthetic system shows an interesting potential as a drug carrier for intranasal delivery.