Studies on Preparation of Poly(3,4-Dihydroxyphenylalanine)-Polylactide Copolymers and the Effect of the Structure of the Copolymers on Their Properties

Mussel‐Inspired Biomaterials: From Chemistry to Clinic

After several billions of years, nature still makes decisions on its own to identify, develop, and direct the most effective material for phenomena/challenges faced. Likewise, and inspired by the nature, we learned how to take steps in developing new technologies and materials innovations. Wet and strong adhesion by Mytilidae mussels (among which Mytilus edulis—blue mussel and Mytilus californianus—California mussel are the most well‐known species) has been an inspiration in developing advanced adhesives for the moist condition. The wet adhesion phenomenon is significant in designing tissue adhesives and surgical sealants. However, a deep understanding of engaged chemical moieties, microenvironmental conditions of secreted proteins, and other contributing mechanisms for outstanding wet adhesion mussels are essential for the optimal design of wet glues. In this review, all aspects of wet adhesion of Mytilidae mussels, as well as different strategies needed for designing and fabricating wet adhesives are discussed from a chemistry point of view. Developed muscle‐inspired chemistry is a versatile technique when designing not only wet adhesive, but also, in several more applications, especially in the bioengineering area. The applications of muscle‐inspired biomaterials in various medical applications are summarized for future developments in the field.

Synthesis and photochromism of catechol-containing symmetrical azobenzene compounds

Symmetrical azobenzene derivatives with two catechol groups, 1d-4d, were synthesized as kinds of novel compounds, and the structures were confirmed using mass spectrometry and nuclear magnetic resonance spectroscopy. These compounds could attain photostationary state rapidly in solution upon UV irradiation, and their photochromism had good reversibility. Substituents and their positions on azobenzene chromophore had obvious influence on the maximum absorption and photochromic performances of these as-synthesized compounds. Electron-donating group on ortho positions could contribute to the redshift π-π* band. The sulfonamide group that is bonded to dopamine molecules and azobenzene rings caused a negligible n-π* transition of cis isomer, resulting in photobleaching upon UV irradiation. Among the four compounds, 4d had the strongest electron-donating ortho-methoxy substituents and lower planarity; thus its absorption could decrease more significantly upon UV irradiation of the same intensity, and its cis-to-trans conversion could be up to 63%. Furthermore, owing to the presence of catechol groups, 4d showed an effective affinity and adhesion to substrate, and on the surface of substrate, a weak colour change could be observed upon UV irradiation, but the reversibility was poorer than that in solution.

Novel and Sustainable Colorants Developed via Incorporating Azo Chromophores into Dopamine Molecules

Inspired by the application of dopamine as an "anchor" and UV absorber, novel sustainable colorants with biscatecholic structure were synthesized through a simple incorporation of simple azo chromophores with dopamine. Their structures were confirmed using MS and NMR analyses, and their application on textile materials was investigated. Compared to the simple azo chromophores with almost no coloring ability on fabrics, the biscatecholic colorants could color different fabrics effectively, mainly through self-polymerization only in the presence of a trace amount of organic base at room temperature, which is environmentally friendly in terms of saving resources and alleviating chemical pollution. Meanwhile, the UV resistance of colored fabrics was enhanced significantly, showing the advantage of protecting wearers from UV damage.

Cytocompatibility of a mussel-inspired poly(lactic acid)-based adhesive

Incorporating catechols into polymers can provide strong adhesion even in moist environments, and these polymers show promise for use in several biomedical applications. Surgical adhesives must have strong bonds, be biocompatible, and function in a moist environment. Poly(lactic acid) (PLA) has a long history as a biocompatible material for hard tissue device fixation. By combining these concepts, catechol-containing poly(lactic acid) (cPLA) polymers are created that are strongly adhesive and degrade in physiological environments. Here, we evaluated the cytocompatibility of cPLA with iron(III) or periodate (IO₄ ^- ) cross-linkers. Fibroblasts cultured in cPLA leachate or on cPLA films generally had slower growth and lower metabolism compared with PLA controls but no differences in viability. These results demonstrated that cPLA was not cytotoxic but that including catechols reduced cell health. When cPLA was cross-linked with periodate, cells generally had reduced metabolism, slower cell growth, and poor actin fiber formation compared with PLA. These results are attributed to the cytotoxicity of periodate since cells cultured with periodate leachate had extremely low viability. Cells grown on the films of iron-cross-linked cPLA generally had high viability and metabolism but slower proliferation than PLA controls. These results indicate that the cPLA and iron-cross-linked cPLA systems are promising materials for biomedical adhesive applications.

New Poly(lactic acid) Active Packaging Composite Films Incorporated with Fungal Melanin

In this work, fungal melanin was used for the first time to prepare poly(lactic acid)-based composites. The films of various melanin concentrations (0.025%, 0.05% and 0.2% w/w) were prepared using an extrusion method. The mechanical, antioxidant, antimicrobial, water vapor and UV-Vis barrier properties, as well as available polyphenolics on the surface, were studied. FT-IR and Raman spectroscopy studies were carried out to analyze the chemical composition of the resulting films. The hydrophobicity, color response, thermal, optical properties, and opacity values were also determined. The results of this study show that the addition of fungal melanin to poly(lactic acid) (PLA) as a modifier influenced mechanical and water vapor barrier properties depending on melanin concentration. In low concentration, melanin enhanced the mechanical and barrier properties of the modified films, but in larger amounts, the properties were decreased. The UV-Vis barrier properties of PLA/melanin composites were marginally improved. Differential Scanning Calorimetry (DSC) analysis indicated that crystallinity of PLA increased by the addition of melanin, but this did not affect the thermal stability of the films. Modified PLA/melanin films showed good antioxidant activity and were active against Enterococcus faecalis, Pseudomonas aeruginosa and Pseudomonas putida. The addition of melanin caused changes in color values, decreasing lightness and increasing the redness and yellowness of films. Based on the results of this study, fungal melanin has good potential to be exploited as a value-added modifier that can improve the overall properties of PLA.

Fabrication of dopamine modified polylactide-poly(ethylene glycol) scaffolds with adjustable properties

Bio-based polymers have been widely used to be as scaffolds for repairing the bone defects. However, the polymer scaffolds are generally lack of bioactivity and cell recognition site. Seeking effective ways to improve the bioactivity and interaction between materials and tissue or cells is clinically important for long-term performance of bone repair materials. In this work, polylactide-b-poly(ethylene glycol)-b-polylactide (PLA-PEG-PLA, PLEL) tri-block copolymers were firstly synthesized by ring-opening polymerization of lactide using PEG with various molecular weights. Inspired by excellent adhesion of dopamine (DA), a facile and effective method was developed to fabricate polydopamine (PDA) and polydopamine/nano-hydroxyapatite (PDA/n-HA) modified PLEL scaffolds by deposition of PDA and PDA/n-HA coating. The surface structure, degradation rates and mineralization of the modified PLEL scaffolds were investigated, and obviously improved after immobilization of PDA and PDA/n-HA coatings. Moreover, the biocompatible results showed a significant increase in cells viability and adhesion. Therefore, the surface modification with PDA and PDA/n-HA could not only adjust the properties of scaffolds, but also reinforce the interfacial adhesion between the PLEL and cells.

Joining Two Natural Motifs: Catechol-Containing Poly(phosphoester)s

Numerous catechol-containing polymers, including biodegradable polymers, are currently heavily discussed for modern biomaterials. However, there is no report combining poly(phosphoester)s (PPEs) with catechols. Adhesive PPEs have been prepared via acyclic diene metathesis polymerization. A novel acetal-protected catechol phosphate monomer was homo- and copolymerized with phosphoester comonomers with molecular weights up to 42000 g/mol. Quantitative release of the catechols was achieved by careful hydrolysis of the acetal groups without backbone degradation. Degradation of the PPEs under basic conditions revealed complete and statistical degradation of the phosphotri- to phosphodiesters. In addition, a phosphodiester monomer with an adhesive P-OH group and no protective group chemistry was used to compare the binding to metal oxides with the multicatechol-PPEs. All PPEs can stabilize magnetite particles (NPs) in polar solvents, for example, methanol, due to the binding of the phosphoester groups in the backbone to the particles. ITC measurements reveal that multicatechol PPEs exhibit a higher binding affinity to magnetite NPs compared to PPEs bearing phosphodi- or phosphotriesters as repeating units. In addition, the catechol-containing PPEs were used to generate organo- and hydrogels by oxidative cross-linking, due to cohesive properties of catechol groups. This unique combination of two natural adhesive motives, catechols and phosphates, will allow the design of novel future gels for tissue engineering applications or novel degradable adhesives.