Endo and Exoskeleton: New Technologies on Composite Materials

An Experimental Anatomic CBCT Study on the Correlations Between MB1 and MB2 of the Mesio-Vestibular Root of the Upper First Molars

This experimental anatomic study aimed to investigate the correlations between the mesio-vestibular canal (MB1) and the second mesio-vestibular canal (MB2) of the mesio-vestibular root of the upper sexts using cone-beam computed tomography (CBCT) imaging. A total of 24 extracted maxillary first molars were collected and subjected to CBCT imaging. The presence, location, and morphology of MB1 and MB2 canals were evaluated using axial, coronal, and sagittal CBCT sections. The interrelation between MB1 and MB2 canals was assessed, including their separate canals, merging, and division points. Among the 24 maxillary first molars examined, 86.5% demonstrated the presence of an MB2 canal in addition to MB1. The MB2 and MB1 were confluent in 80% of the cases with a confluent height of 4,16 mm. The mean distance between MB1 and MB2 canals was 1.85 mm. This study provides detailed information on the anatomic correlations between MB1 and MB2 canals of the mesio-vestibular root in the upper sexts using CBCT imaging. The high prevalence of MB2 canals suggests their significance in endodontic procedures and emphasizes the importance of thorough exploration and identification during root canal treatment. The knowledge of the location and morphology of these canals can aid in successful endodontic therapy and enhance treatment outcomes.

Localization of composite prosthetic feet: manufacturing processes and production guidelines

Amputation levels in Egypt and the surrounding neighborhood require a state intervention to localize the manufacturing of prosthetic feet. Amputations are mainly due to chronic diseases, accidents, and hostilities' casualties. The prosthetic foot type is traditionally classified according to the number of axial rotational movements, and is recently classified according to the energy activeness of the foot. The localization of this industry needs a preliminary survey of the domestic technological levels with respect to the foot type. Upon the results of this survey, the energy storage response foot has appealing metrics to proceed with its manufacturing. A prototype manufacturing chain is designed and a set of these feet with a certain commercial size of 27 is manufactured. Resin impregnation technology for carbon fiber composites is followed in this work. The feet are tested according to ISO 22,675. Based on the dimensional and mechanical results, a manufacturing value chain is proposed with the prospective resin transfer molding technology. This value chain will guarantee the required localization as well as the natural growth of this value chain with all related activities like accreditation of practices as well as manpower certification.

Bionic intelligent ankle-foot prosthesis based on the conjugate curved surface

Given the poor biomimetic motion of traditional ankle-foot prostheses, it is of great significance to develop an intelligent prosthesis that can realize the biomimetic mechanism of human feet and ankles. To this end, we presented a bionic intelligent ankle-foot prosthesis based on the complex conjugate curved surface. The proposed prosthesis is mainly composed of the rolling conjugated joints with a bionic design and the carbon fiber energy-storage foot. We investigated the flexibility of the prosthetic ankle joint movement, and the ability of the prosthetic foot to absorb ground impact during the gait cycle. Experimental results showed the matching of the ankle/toe position relationship of the human foot during simulated walking, which is helpful to realize the biomimetic motion of the human foot and ankle. It can also help therapists and clinicians provide better rehabilitation for lower-limb amputees.

Surface roughness and characteristics of CAD/CAM zirconia and glass ceramics after combined treatment procedures

BACKGROUND

The roughening of the inner surface of a fixed ceramic restoration is an important factor for the bonding process. The aim of this study is to investigate the effect of combined surface treatments (acid etching, air-abrasion and Er: YAG Laser) on surface roughness of CAD/CAM fabricated zirconia (ZrO₂) and lithium-disilicate glass ceramics (LDS).

METHODS

Sixty ZrO₂ (Ceramill Zi) and LDS (IPS e.max CAD) specimens, (5 mm in width, 5 mm in length and 1.5 mm in height) were fabricated using CAD/CAM and sintered according to the manufacturer's instructions. All specimens subjected to three surface treatment combinations; etching with 4% hydrofluoric acide (HF), airborne-particle abrasion with 110-μm alumina (Al₂O₃) (AP) and Er:YAG laser (Er:YAG) (Group A-HF + AP; Group B-Er:YAG + AP, and Group C-Er:YAG + HF). Perthometer was used to measure the surface roughness of the specimens before and after the tretments.

RESULTS

Group A presented the highest Ra (LDS 0.81 ± 0.27 and ZrO₂ 0.67 ± 0.21 after treatment) and Group C the lowest (LDS 0.45 ± 0.13 and ZrO₂ 0.26 ± 0.07, after treatment). Compared with before treatment, the Ra were significantly different only in Group A both ZrO₂ and LDS after treatment (p < 0.05). Qualitative SEM images suggested the surface topography of the ZrO₂ was smoother than the LDS. Less surface changes were observed in the Er:YAG combined procedures than HF + AP.

CONCLUSIONS

HF + AP was significantly succesful in modifying the ceramic surface. Er:YAG did not sufficiently promote the surface topography, even if combined with any other treatments. Overall, surface tretments on ZrO₂ not easier than LDS.

Surgical Margins in 3D Planned Mandibular Resections for Squamous Cell Carcinomas of the Oral Cavity

PURPOSE

Three-dimensional (3D) planned mandibular resections using cutting guides and preplanned plates are now widely used in oncological surgery. The main advantages are the gain of time, precision, and esthetic outcomes. The drawbacks include costs, time for planning, and printing the surgical tools. This time between the radiological data and the surgery may allow tumor progression, rendering the custom-made guides useless. There is no consensus regarding surgical margins that should be planned to ensure a safe oncologic outcome. The purpose of this retrospective study is to evaluate if the planned bony margins are adequate.

MATERIALS AND METHODS

Inclusion criteria were: Squamous cell carcinomas of the anterior and lateral floor of mouth with mandibular invasion (T4); mandibular resection using 3D planning and cutting guides. Between June 2015 to December 2019, 16 patients met the criteria. The time between the planning and the surgery was recorded. The authors decided to use a margin of at least 1 cm on the preoperative computerized tomography scans on each side of the tumors in our planning for all patients. The authors then measured the distance of the bone resection on the pathological specimen.

RESULTS

All 16 patients had safe bone surgical margins (R0). The average time from the scanners used for the planning to the surgery was 33 days.

DISCUSSION

All the cutting guides could be used. The pathology examination showed safe oncological margins and no patients required further resection. A 1 cm margin during 3D planning for mandibular resections with 3D printed cutting guides, in patients with T4 Squamous Cell Carcinomas can therefore be considered safe.

Elastodontic treatment with oral bio-activators in young children

BACKGROUND

Elastodontic therapy can correct bad oral habits and malocclusions in young patients by guiding jaw growth, eliminating functional disorders, and improving tooth position. The aim of this study was to assess the effects of bio-activator therapy on the presence of atypical swallowing with tongue thrust in growing patients.

METHODS

A retrospective study was conducted. Data regarding the early orthodontic treatment of 40 consecutive patients with atypical swallowing and tongue thrust (23 males and 17 females) were assembled from January 2019 to January 2020. All patients (≥7 and ≤15 years of age) were monitored for 1 year in a private practice in Isernia, Italy.

RESULTS

The mean age at commencement of orthodontic treatment was 8.5 years (range=7.1-14.9 years), and the mean total duration of therapy was 1 year (range=11 months-1 year). Final lateral radiographs demonstrated a mean of improvement of 8° for upper and lower incisor proclination (I/SN) and 3.5° for incisor mandibular plane angle (IMPA) in 36 patients, and 5° of I/SN and 2° of IMPA in the remaining 4 children after 1 year of treatment.

CONCLUSIONS

Bad oral habits in younger patients must not be ignored. The duration of treatment can differ depending on the severity of the open bite and the patient's cooperation. This study demonstrates the short-term efficacy of these myofunctional appliances in the treatment of atypical swallowing. In order to quickly eliminate factors which endanger healthy development of dento-skeletal structure, it is important to closely monitor patients during their development phase.

Investigation of the palatal soft tissue volume: a 3D virtual analysis for digital workflows and presurgical planning

Background

In mucogingival and implant surgery, an autologous soft tissue graft from the palate is the gold standard for reconstructing missing keratinised soft tissue and volume. Previously, presurgical measurements of the graft harvesting site were described with two-dimensional (2D) linear measurements. The present observational clinical study aimed to evaluate a three-dimensional (3D) measurement method for determining the present palatal soft tissue volume for each patient individually.

Methods

Pre-existing cone beam computed tomography (CBCT) scans of 20 patients were converted into 3D Standard Tessellation Language models of the bone surface. Intraoral impressions of the maxilla were taken and digitised to visualise the gingival surface. The resulting virtual models of bone (reference value) and gingival (actual value) surfaces were merged, with tooth surfaces used for registration. The region between the central incisors and the hard palate was subdivided into 5 regions of interest (ROIs). The distance between palatal bone and gingival surface was analysed both volumetrically and linearly, and the results were statistically evaluated for the ROIs.

Results

The average gingival surface area on the palate was 19.1 cm², and the mean volume was 58.2 cm³ (± 16.89). Among the ROIs, the mean linear value was highest in the most distal region, from the second molar to the hard palate (4.0 ± 1.09 mm) and lowest in the canine region (1.9 ± 0.63 mm). For mean distance, significant differences were found for the anterior palate and the most posterior palate in comparison with all other ROIs (p < 0.01). The volume measurements also declined significantly and steadily between the posterior (1.9 ± 1.0 cm³) and anterior palates (0.4 ± 0.2 cm³).

Conclusions

By merging digital data, palatal soft tissue could be quantified virtually. The results were reliable and comparable to previous findings with linear measurement methods. This 3D soft tissue volume analysis method fully exploited the diagnostic potential of data that are frequently collected for presurgical planning in oral surgery (i.e., CBCT + surface scans). This evaluation method might be useful for volumetric and linear measurements in other applications in anatomy and for determining palatal soft tissue dimensions in the planning stage before surgical interventions.

Trial registration

This observational clinical trial was retrospectively registered in the German Clinical Trials Register, reference number: DRKS00023918.

Retention of bar clip attachment for mandibular implant overdenture

OBJECTIVES

The aim of the present study was to evaluate the retention and loss of retention after fatigue testing at different time intervals between two types of bar clip materials (digitally designed PEEK bar clip and regular Nylon bar clip).

MATERIALS AND METHODS

An epoxy model was constructed for a completely edentulous mandible. Two implants were placed according to prosthetically driven implant placement by a computer-guided surgical stent. Bar clips were digitally designed, 3D printed, and pressed into Poly Ether Ether Ketone (PEEK). Pick up of PEEK and nylon clips was performed on the dentures fitting surface using self-cured acrylic resin. Each study group was subjected to an insertion and removal fatigue test simulating 3 years of patient usage. Retention values were recorded using the universal testing machine at initial retention and after 1, 2, and 3 years of simulated usage. For proper sample sizing, 24 models and dentures (12 for each group) were used. An independent sample t-test and repeated measures analysis of variance were used to compare the data.

RESULTS

There were statistically significant differences in retention between the PEEK and nylon bar clips at the beginning of the experiment (p = 0.000*). But after 3 years of simulated use, there was no significant difference in retention between the test groups (p = 0.055, NS). After 3 years of simulated use, the retention of PEEK clips decreased by - 58.66% recording 17.37 ± 1.07 N, while the retention of nylon clip increased by + 2.99% recording 16.56 ± 0.88 N.

CONCLUSION

The digitally designed PEEK clip showed comparable retention results to the nylon clip after 3 years of simulated use.

CLINICAL RELEVANCE

Maintenance of bar attachment with PEEK clip offers a clinical solution after the wear of normal plastic clips, which is a cheap solution that is easily fabricated and picked up into the denture. Digital fabricated PEEK bar retentive inserts can be used in cases of bar attachment wear.

Prosthodontic Treatment in Patients with Temporomandibular Disorders and Orofacial Pain and/or Bruxism: A Review of the Literature

Temporomandibular disorders are a group of conditions affecting the temporomandibular joints, the jaw muscles, and related structures. Patients with temporomandibular signs and/or symptoms frequently present with indications for prosthetic treatment. The management of these patients aims to achieve patient comfort, occlusal stability, and the complex restoration of the teeth. The goal of this review is to provide an overview of the relationship between prosthodontics and temporomandibular disorders and/or bruxism with a focus on the cause-and-effect implications and the strategies for planning prosthetic treatments in patients with temporomandibular disorders and/or bruxism.

Evaluation of Biomechanical and Chemical Properties of Gamma-Irradiated Polycaprolactone Microfilaments for Musculoskeletal Tissue Engineering Applications

An appropriate and reliable sterilization technique is crucial for tissue engineering scaffolds. Skeletal muscle scaffolds are often fabricated using microfilaments of a wide variety of polymers. One method for sterilization is 25 kGy of gamma irradiation. In addition, sterilization through irradiation should administer a dose within a specific range. Radiation directly affects the chemical and mechanical properties of scaffolds. The accuracy and effects of irradiation are often not considered during sterilization procedures; however, these are important since they provide insight on whether the sterilization procedure is reliable and reproducible. This study focused on the chemical and mechanical characterization of 25 kGy gamma-irradiated scaffold. The accuracy and uncertainty of the irradiation procedure were also obtained. X-ray diffraction (XRD) and differential scanning calorimetry (DSC) analyses were performed to determine whether the crystallinity of the polymer changed after irradiation and whether gamma rays influenced its thermal properties. The tensile parameters of the microfilaments were analyzed by comparing irradiated and nonirradiated scaffolds to determine whether gamma radiation changed their elastic behavior. Dose distribution and uncertainty were recorded with several dosimeters. The results showed that the irradiation process slightly affected the mechanical parameters of the scaffold; however, it did not modify its crystallinity or thermal properties. The irradiation was uniform, since the measured uncertainty was low. The scaffold was pathogen-free after 7 days; this meant sterilization was achieved. These results indicated that gamma-sterilized scaffolds were a promising material for use as a skeletal muscle analog material for tissue-engineering applications because they can be sterilized with gamma rays without changing their chemical structure and mechanical properties. This study provided the dose distribution measurement and uncertainty calculations for the sterilization procedure.

The use of monophasic implants as an alternative of implant-prosthetic rehabilitation in the posterior maxilla with no sinus lift

BACKGROUND

Over the years, numerous studies and advanced technologies about dental implants have been evolved from the traditional two-stage procedure to immediate loading. Implants located in the posterior maxillary region allow to achieve an appropriate prosthetic support. The aim of this work was to solve the atrophied posterior maxilla, through monophasic implants with flapless technique and intraoral electro-welding.

METHODS

In this study were enrolled 120 patients between 20 and 68 years old (mean age of 34.2 years), where females predominate with 53.1% compared to 46.9% males. The patients were presented at the Oral Surgery Clinic of the Aldent University (Tirana, Albania), for a period 2009-2019. Briefly, 310 monophasic implants were placed, TRAMONTE type (Milan, Italy), to the posterior maxilla thus avoiding the sinus, with dense and wide threads, of different lengths and widths. The surgical technique was minimally invasive, flapless one. Data were expressed as mean + standard error (SEM) of all the radiographic outcomes obtained; and as statistical analysis was used the Student's t-test. P<0.5 and P<0.05, were considered significant.

RESULTS

A part of the patients were hypertensive and type 2 diabetic, then a negligible part were smokers, also a lack of oral hygiene was observed in 40% of cases. After 5 years of observation, it appeared that 95.9% of the implants were successful. Furthermore, the mesial and distal bone loss during the first three years was 0.1 mm, while after 5 years no continuation of bone loss was observed.

CONCLUSIONS

The application of monophasic implants must be performed according to approved protocols, considering the conditions of the posterior maxillary region, obtaining in this way a safe dental implantation.

Emerging technologies and their potential for generating new assistive technologies

Limited access to assistive technology (AT) is a well-recognized global challenge. Emerging technologies have potential to develop new assistive products and bridge some of the gaps in access to AT. However, limited analyses exist on the potential of these technologies in the AT field. This paper describes a study that aimed to provide an overview of emerging technological developments and their potential for the AT field. It involved conducting a gray literature review and patent analysis to create an overview of the emerging enabling technologies that may foster the development of new AT products and services and identify emerging AT applications. The analysis identified seven enabling technologies that are relevant to the AT field. These are artificial intelligence, emerging human-computer interfaces, sensor technology, robotics, advances in connectivity and computing, additive manufacturing and new materials. Whilst there are over 3.7 million patents related to these enabling technologies, only a fraction of them - 11,000 patents were identified in the analysis specifically related to AT (0.3%). The paper presents some of the promising examples. Overall, the results indicate that there is an enormous potential for new AT solutions that capitalize on emerging technological advances.

A cohort study on anticoagulant therapy risks in dental patients after multiple extractions

BACKGROUND

Due to technology and pharmaceutical science and increasing life expectancy, the patient population is continuously aging. Patients requiring dental extractions often have systemic and/or chronic diseases and are undergoing polypharmacologic therapy. Oral surgeons often interface with patients who perform anticoagulant therapy. The main aim of this study was to clarify what the contraindications and short-/long-term complications may be.

METHODS

A sample of 298 patients (mean age 58 years) who required multiple surgical dental extractions has been taken in consideration. Patients were divided into groups and subgroups according to the anticoagulant drug therapy.

RESULTS

Long-term complications represented variable bleeding between groups from 8 hours to 7 days after surgery. The One-Way ANOVA Test was used to compare the results between groups. Patients treated with direct oral anticoagulants showed fewer intraoperative problems, but further studies and further collaboration between doctors, cardiologists and oral dentists/surgeons are certainly needed to manage these patients in a predictable manner.

CONCLUSIONS

This study showed that using direct oral anticoagulants drugs results in few intraoperative bleeding, less postoperative hemorrhagic complications, and an easier administration of the drugs respect vitamin K antagonists, with mild and manageable complications.

Alloplastic Temporomandibular Joint Reconstruction Following Recurrent Ameloblastoma Resection

ABSTRACT

Ameloblastomas are benign tumors that most commonly affecting the mandible. The current standard of treatment for ameloblastomas is resection followed by reconstruction that has historically been accomplished through the use of a microsurgical vascularized flaps taken from the iliac crest or fibula. Alloplastic reconstruction methods have gained popularity over recent years with success reported in the reconstruction of many pathologies, including ankylosis, condylar fracture, neoplasia involving extensive resection, severe inflammatory/degenerative temporomandibular joint (TMJ) disease, and congenital TMJ abnormalities. The authors present a patient who successfully underwent ameloblastoma resection and TMJ reconstruction with a custom TMJ Concepts alloplastic implant. The authors also present a review of the literature on alloplastic TMJ reconstruction following ameloblastoma resection. To our knowledge, this is the second report in the literature on the use of a TMJ Concepts implant after ameloblastoma resection.

Molecular features and tissue engineering techniques applied to regenerative surgery: an overview of recent data

INTRODUCTION

Regenerative procedures have become common in the medical and dentistry rehabilitation fields. Often, tissue regeneration maneuvers are necessary to rehabilitate patients in a safe and predictable manner. The aim of this narrative review was to highlight the molecular implications during regenerative surgery.

EVIDENCE ACQUISITION

The analysis of the literature was conducted on the main scientific databases Pubmed, Scopus, MDPI.

EVIDENCE SYNTHESIS

After a screening of 66 results only 8 were included.

CONCLUSIONS

Knowing these molecular features, it is possible to highlight which are the biomaterials that offer greater potential and identify the best protocols according to the surgical needs.

1-Year Evaluation of OT Bridge Abutments for Immediately Loaded Maxillary Fixed Restorations: A Multicenter Study

Objective  Preliminary data on survival and success rates of immediately loaded, maxillary, screw-retained, implant-supported, fixed restorations delivered on narrow and low-profile OT Equator abutments (OT Bridge, Rhein’83) were evaluated.

Materials and Methods  This retrospective study evaluated data collected from patients rehabilitated with OT Bridge prosthetic concept between November 2017 and February 2019 in six different centers. Outcome measures were implant and prosthetic survival rates, biological and technical complications, marginal bone loss (MBL), oral health impact profile (OHIP), bleeding on probing, and plaque index.

Results  A total of 76 implants were inserted in 14 patients. Patients were followed for a mean period of 15.8 months (range = 12–24). All the patients receive OT Equator (Rhein'83) as intermediate abutments. One year after loading, one implant failed (1.3%). None of the prosthesis failed. One prosthetic complication was experienced in one patient. Three out of 76 implants were connected to the prosthetic framework using only the Seeger system, without screw. Difference in OHIP values was statistically significant (71.9 ± 8.5; p = 0.000). One year after loading, MBL was 0.21 ± 0.11 mm and p- value was 0.000. One year after loading, 8.7% of the examined implant sites present positive bleeding on probing, while 6.4% of the implant sites presented plaque.

Conclusion  The OT Equator abutments (Rhein'83) showed successful results when used to support maxillary fixed dental prosthesis delivered on four to six implants. High implant and prosthetic survival rates, very low complications, high patient satisfaction, and good biological parameters, including only 0.2 mm of bone remodeling were experienced one year after function. Further studies are needed to confirm these preliminary results.

Copper-Calcium Hydroxide and Permanent Electrophoretic Current for Treatment of Apical Periodontitis

Endodontic failure has been and continues to be a problem for endodontics-specialists. Complicated anatomy, numerous foramens, and accessory canals are an environment for microorganisms to infect the teeth. The purpose of the present work was to evaluate the regeneration of copper–calcium hydroxide (Cupral)-endodontically treated teeth diagnosed with apical periodontitis using an electrophoresis technique. In total, 132 patients, aging from 19 to 65 years old, underwent endodontic treatment mono- and multi-radicular teeth, with complicated canals from January 2019 to June 2020. The patients were divided into two groups: (i) the control group—which included 54 patients (n = 62 teeth) receiving endodontic paste (Calcipast + 1) and, as final filling, the AH-Plus^TM cement—and (ii) the Cupral group, which included 78 patients (n = 80 teeth) receiving Cupral paste plus the electrophoretic current and, as final filling, the Atacamit-alkaline cement. The clinical cases were periodically observed along an 18-month follow-up period via radiography. Data were expressed as focal size of the lesions (mean ± standard error (SEM) of all the radiographic outcomes) observed in each group at each interval point. Statistical analysis was performed using the Student’s t-test that allowed us to compare the control and Cupral groups; the statistical significance was set at p < 0.05 and p < 0.01, where the latter was highly significant. Before treatments, the focal sizes were 4.8 mm and 4.95 mm for control and Cupral-treated groups, respectively. After 6 months, the mean focal sizes were 3.9 mm and 2.14 mm for the control and Cupral groups, respectively. After 12 months, in the control group, the mean focal size was measured at 2.8 mm, while, in Cupral group, the lesion size decreased down to 0.31 mm and a highly dynamic regeneration of the destructive focal-bone occurred. After 18 months, the lesions were further significantly reduced in the control group (mean values of 2.62 mm), while they were barely detectable in the Cupral group (0.2 mm). In conclusion, we provide initial evidence that the Cupral-electrophoresis methodology is effective in treating destructive periodontitis of teeth with problematic canals up to 18 months, thus allowing teeth preservation.

Tailoring Pyro-and Orthophosphate Species to Enhance Stem Cell Adhesion to Phosphate Glasses

Phosphate-based glasses (PBGs) offer significant therapeutic potential due to their bioactivity, controllable compositions, and degradation rates. Several PBGs have already demonstrated their ability to support direct cell growth and in vivo cytocompatibility for bone repair applications. This study investigated development of PBG formulations with pyro- and orthophosphate species within the glass system (40 − x)P₂O₅·(16 + x)CaO·20Na₂O·24MgO (x = 0, 5, 10 mol%) and their effect on stem cell adhesion properties. Substitution of phosphate for calcium revealed a gradual transition within the glass structure from Q² to Q⁰ phosphate species. Human mesenchymal stem cells were cultured directly onto discs made from three PBG compositions. Analysis of cells seeded onto the discs revealed that PBG with higher concentration of pyro- and orthophosphate content (61% Q¹ and 39% Q⁰) supported a 4.3-fold increase in adhered cells compared to glasses with metaphosphate connectivity (49% Q² and 51% Q¹). This study highlights that tuning the composition of PBGs to possess pyro- and orthophosphate species only, enables the possibility to control cell adhesion performance. PBGs with superior cell adhesion profiles represent ideal candidates for biomedical applications, where cell recruitment and support for tissue ingrowth are of critical importance for orthopaedic interventions.

Growth Factors in Oral Tissue Engineering: New Perspectives and Current Therapeutic Options

The present investigation is aimed at systematically analyzing the recent literature about the innovative scaffold involved in the reconstructive surgeries by applying growth factors and tissue engineering. An extensive review of the contemporary literature was conducted according to the PRISMA guidelines by accessing the PubMed, Embase, and Scopus Elsevier databases. Authors performed the English language manuscript research published from 2003 to 2020. A total of 13 relevant studies were included in the present review. The present systematic review included only papers with significant results about correlation between scaffold, molecular features of growth factor, and reconstructive surgeries in oral maxillofacial district. The initial research with filters recorded about 1023 published papers. Beyond reading and considering of suitability, only 42 and then 36 full-text papers were recorded for the revision. All the researches recorded the possibility of using growth factors on rebuilding atrophic jaws. Different growth factors like morphogenetic factors, cytokines, and inflammatory ones and their application over different scaffold materials were recorded. Further investigations should be required in order to state scientific evidence about a clear advantage of applying tissue engineering for therapeutic purpose.

Gels in Medicine and Surgery: Current Trends and Future Perspectives

Gel is a two-phase elastic colloidal material, consisting of a dispersed liquid incorporated in the solid phase [...].

Multicenter clinical trial on dental implants survival rate: a FDS76® study

BACKGROUND

Implantology, thanks to its predictability in oral rehabilitations, has become a widespread method for rehabilitating edentulous patients, offering excellent patient satisfaction. Improving the quality of oral health, especially if rehabilitation involves minimal short and long-term complications, leads to an improvement in the quality of life of our patients.

METHODS

This clinical study was conducted to evaluate the short and long-term complications (up to 18 months) of implant-prosthetic rehabilitations performed with a new dental implant (FDS76^®, Italy).

RESULTS

The results showed a limited number of complications or implant failures.

CONCLUSIONS

Knowing the latter could certainly help improve both surgical and dental materials performance.

Multicenter clinical trial on dental implants survival rate: a FDS76® study

BACKGROUND

Implantology, thanks to its predictability in oral rehabilitations, has become a widespread method for rehabilitating edentulous patients, offering excellent patient satisfaction. Improving the quality of oral health, especially if rehabilitation involves minimal short and long-term complications, leads to an improvement in the quality of life of our patients.

METHODS

This clinical study was conducted to evaluate the short and long-term complications (up to 18 months) of implant-prosthetic rehabilitations performed with a new dental implant (FDS76^®, Italy).

RESULTS

The results showed a limited number of complications or implant failures.

CONCLUSIONS

Knowing the latter could certainly help improve both surgical and dental materials performance.

Growth Factor Applied to Oral and Regenerative Surgery

The complex tissue engineering/regenerative medicine now represents a therapeutic reality applicable to various organic substrates, with the aim of repairing deficient tissues and restoring normal organ function. Among the possible specialized uses, in the dental field, the treatment of periodontal, pre- and peri-implant bone defects should be mentioned. Nowadays, in oral surgery, there are many surgical methods that can be used, despite that the literature still seems controversial regarding the actual advantages of their use. Surely, this work will bring to light the current clinical-surgical orientations and the different perspectives.

Occlusal Load Considerations in Implant-Supported Fixed Restorations

The advent of new technologies in the field of medicine and dentistry is creating improvements that lead clinicians to have materials and procedures able to improve patients’ quality of life. The aim of this article is to evaluate occlusion load and its consequences on fixed implant-supported prosthesis. New materials have granted clinicians the possibility achieve great aesthetic results in dental prosthesis, and new procedures allow them to standardize and give precise and repeatable results, especially for the functional and long-term stability aspects of products. Some principles should be carefully evaluated and applied to every dental prosthesis; the evaluation of the forces and fitting of meso-structures to dental implants, an aspect that is often not well considered by clinicians, is the main focus of this article.

FEM Analysis Applied to OT Bridge Abutment with Seeger Retention System

OBJECTIVE

 The purpose of this investigation is to highlight the technical components of a new kind of screw-retained dental implant prosthesis. The hypothesis is whether the OT Bridge (Rhein 83 S.R.L.; Bologna, Italy) system could be applied without secondary screw in the "all-on-four" retention system, thanks to the presence of an internal seeger.

MATERIALS AND METHODS

 By using engineering device such as finite element method (FEM) and von Mises investigation, it has been studied how the fixed prosthodontics for full-arch retention can be influenced by the presence of the screw for stabilizing it.

RESULTS

 In a dental implant, one model with four different configurations of the full-arch prosthesis retainer and the seeger has been investigated and then examined in contrast with or without the passant screw for locking the system. The experiments of this virtual study highlighted different features and mechanical behaviors of prosthodontic attachments.

CONCLUSION

 The first two configurations, respectively those in which there are four and three connection screws, are safe and predictable. Therefore, the presence of the seeger significantly improves the stability and the retention of the whole prosthesis.

Biological and Chemo-Physical Features of Denture Resins

In the dental field, the study of materials has always been the basis of the clinical practice. Over the years, with the evolution of materials, it has been possible to produce safe and predictable prosthetic devices, with ever better aesthetic features, biocompatibility and patient satisfaction. This review briefly analyzes the features of dental resin materials to underline the biological, microbiological and chemo-physical characteristics. The main aim of prosthodontics is to rehabilitate patients and therefore improve their quality of life. Dental resins are the main materials used for the production of dentures. Once solidified, these polymers have different mechanical or surface characteristics. The results of the literature on these characteristics were analyzed and some new brand dental resins, known as modern resin, were subsequently evaluated. The new materials are undoubtedly a step forward in the creation of dental prostheses, and also in all subsequent maintenance phases. This review shows how changing the chemical structure of the resins could have microbiological influences on the growth and management of the biofilm, and also physical influences in terms of its mechanical characteristics. The development of new materials is a constant goal in dentistry in order to obtain increasingly predictable rehabilitations.

Worldwide 3D Printers against the New Coronavirus

The pandemic caused by the new coronavirus has placed national health systems of different countries in difficulty, and has demonstrated the need for many types of personal protective equipment (PPE). Thanks to the advent of new three-dimensional printing technologies, it was possible to share print files (using stereolithography (stl)) quickly and easily, improve them cooperatively, and allow anyone who possessed the materials, a suitable 3D printer and these files, to print. The possibility of being able to print three-dimensional supports, or complete personal protective equipment has been of incredible help in the management of COVID-19 (Coronavirus Disease 2019). The times and the relatively low costs have allowed a wide diffusion of these devices, especially for the structures that needed them, mainly healthcare facilities. 3D printing, now includes different fields of application, and represents, thanks to the evolution of methods and printers, an important step towards the “digital world”.

Computerization and Digital Workflow in Medicine: Focus on Digital Dentistry

Continuously evolving technologies make dentistry one of the most advanced sectors in the field of medicine. The digital improvements in recent years have brought many advantages to clinicians and patients, including reduced working times, lower costs and increased efficiency of performance. Some of the most important digital technologies introduced in the dental filed are cone beam computer tomography (CBCT) scan, Computer Aided Design/Computer Aided Manufacturing (CAD-CAM) systems, and intraoral scanners. All of these allow faster and more accurate rehabilitations, with the opportunity of pre-simulation of the final treatment. The evolution of computer science has brought significant advantages in the medical and dental fields, making the diagnosis and execution of even complex treatments, such as implantology and bone reconstruction, possible. The digital world is trying to supplant the traditional analog workflow, and over time, with the further advance of technologies, it should tend to be the treatment of choice of our patients.

Socioeconomic behaviors on dental professions: a Google Trends investigation in Italy

INTRODUCTION

Dental profession has expanded, and the knowledge that oral health affects systemic health is of greater concern to patients. The purpose of this study is to understand the demand for dental treatments in Italy, knowing if there is any correlation between socioeconomic condition and oral rehabilitation typology. Moreover, focusing on the requested rehabilitations type and on finding alternatives, unconventional solutions.

EVIDENCE ACQUISITION

The research was conducted using an important research database defined Google Trends, with search terms such as "dolore denti" (toothache). A statistical analysis has been conducted in this study evaluation Pearson Correlation Coefficient.

EVIDENCE SYNTHESIS

The results divided region by region provide data that reflect the socio-economic conditions of the population concerned. Other results have been obtained from government source, to learn about the economic situations of the individual regions, for this reason the GDP was examined. Furthermore, there are important results regarding the parasanitary professions to which patients, for economic reasons, tend to refer.

CONCLUSIONS

This study will surely be an excellent starting point to investigate professional abuse and above all to assess the needs of the different regions.

3D Printing beyond Dentistry during COVID 19 Epidemic: A Technical Note for Producing Connectors to Breathing Devices

(1) Background: To mitigate the shortage of respiratory devices during the Covid-19 epidemic, dental professional volunteers can contribute to create printed plastic valves, adapting the dental digital workflow and converting snorkeling masks in emergency CPAP (continuous positive airways pressure) devices. The objective of this report was to provide the specific settings to optimize printing with the 3D printers of the dental industry. (2) Methods: In order to provide comprehensive technical notes to volunteer dental professionals interested in printing Charlotte and Dave connectors to breathing devices, the entire digital workflow is reported. (3) Results: The present paper introduces an alternative use of the dental Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) machinery, and reports on the fabrication of a 3D printed connection prototypes suitable for connection to face masks, thereby demonstrating the feasibility of this application. (4) Conclusions: This call for action was addressed to dentists and dental laboratories who are willing to making available their experience, facilities and machinery for the benefit of patients, even way beyond dentistry.

A Comparison of the Conventional PiG Marker Method Versus a Cluster-Based Model when recording Gait Kinematics in Trans-Tibial Prosthesis Users and the Implications for Future IMU Gait Analysis

Validation testing is a necessary step for inertial measurement unit (IMU) motion analysis for research and clinical use. Optical tracking systems utilize marker models which must be precise in measurement and mitigate skin artifacts. Prosthesis wearers present challenges to optical tracking marker model choice. Seven participants were recruited and underwent simultaneous motion capture from two marker sets; Plug in Gait (PiG) and the Strathclyde Cluster Model (SCM). Variability of joint kinematics within and between subjects was evaluated. Variability was higher for PiG than SCM for all parameters. The within-subjects variability as reported by the average standard deviation (SD), was below 5.6° for all rotations of the hip on the prosthesis side for all participants for both methods, with an average of 2.1° for PiG and 2.5° for SCM. Statistically significant differences in joint parameters caused by a change in the protocol were evident in the sagittal plane (p < 0.05) on the amputated side. Trans-tibial gait analysis was best achieved by use of the SCM. The SCM protocol appeared to provide kinematic measurements with a smaller variability than that of the PiG. Validation studies for prosthesis wearer populations must reconsider the marker protocol for gold standard comparisons with IMUs.